Sefram MW 3200 & MW 3500 Clamp-on Power Meters solutions for electrical maintenance The all-in-one clamp-on with comprehensive facilities : Graphical Wattmeter Multimeter- Oscilloscope... The MW 3500 features a unique combination of powerful diagnostics and signal waveform display in one clamp-on instrument. Measures Power (W, VA, VAR), energy consumption (kWh) and power factor on single phase and three-phase systems. Measurements can be saved and printed out, or down loaded to a PC for analysis and storage, via its RS232 serial interface. In short, the MW 3500 is the perfect tool for the trouble shooting and detailed analysis of electrical system problems. Single and three-phase power measurements, made easy... With its sophisticated but convenient facilities, the MW 3200 is the ideal instrument to check for correct power usage and control excess consumption. The True RMS MW 3200 clamp-on is designed to simplify power measurements on both single and balanced three-phase systems. Available from our distribution part n e r s . MW 3200 & MW 3500 Clamp-on Power Meters Sefram MW 3200 MW 3500 • Current (AC; DC; True RMS) Range 400 A/ 1000 A Resolution 0.1 A /1 A Accuracy ± (1.5% L + 5 d) • Voltage (AC; DC; True RMS) Ranges 400 V/ 600 V Resolution 0.1 V/ 1 V Accuracy ± (1% L + 5 d) • Active, Apparent, Reactive power (single and three phase systems) Ranges* 40 k/ 400 k/ 600 k 40 A/ 400 A/ 2000 A 0.01 A/ 0.1 A/ 1 A ± (1.5 %L + 5d) 4 V/ 40 V/ 400 V/ 750 V 0.001 V/ 0.01 V/ 0.1 V/ 1V ± (1% L + 5 d) 4 k/ 40 k/ 400 k/ 1200 k * ActivePower = W - Apparent Power = VA - Reactive Power = VAR Resolution Accuracy • Power Factor Ranges Resolution Accuracy • Active Energy Ranges Resolution Accuracy • T.H.D. • Frequency Ranges Resolution Accuracy • Oscilloscope function Current Measurements Voltage Measurements Frequency Ranges Time base Refresh Interface Memory Min./Max/HOLD • Max. jaw opening Display Power requirements Battery life Automatic power off Safety IEC 1010 Dimensions & Weight Warranty 10 / 100 / 1 k ± (2.5% L + 5 d) single phase systems 0.3 cap. to 0.3 ind. 0.01 ± 3° 1 / 10 / 100 / 1 k ± (2.5% L + 5 d) single and three phase systems 0.3 cap. to 0.3 ind 0.001 ± 3° - 4/ 40/ 400/ 4000/ 40000 kWh 1/ 10/ 100 Wh/ 1/ 10 kWh ± (3%L + 5d) - if > 2 kWh ± 0,08 kWh - if < 2 kWh for current and voltage (1% to 600 %) 20 Hz to 1 kHz 0.1 Hz ± 0.5% - 40 to 70 Hz ± 1% - 20 to 1 kHz 20 Hz to 1 kHz 0.1 Hz ± 0.5% - 40 to 70 Hz ± 1% - 70 to 1 kHz RS 232/ 9600 bps yes 55 mm 4000 counts- Bargraph (25 seg.) 1 x 9V 15 h. typ. yes CAT. III, 600 V 251 x 98 x 52 mm, 500 g 1 year 10A/20A/40A/100A/200A/400A/2000A (± 3%R + 1 pixel) 4V/10V/20V/40V/100V/200V/400V/1000V (± 2%R + 1 pixel) Optional Accessories • SA 100 • SA 101 • SA 105 • SA 106 • SA 110 • SA 115 • SA 120 • SI 655 - DC and 10 Hz to 600 Hz 2/ 4/ 10/ 50 ms/div. 0.5 time/ sec. RS 232/ 9600 bps 8 screens, 2000 measurements yes 60 mm backlighted LCD matrix (160 x 128 cts) 6 x 1.5 V 24 h. typ. (without backlight) yes CAT. IV, 600 V 300 x 98 x 52 mm, 820 g 1 year Software - SI 655- Winlog Test lead set with straight fixed ban. plug Test lead set with right angle fixed safety ban. plug Patchcord set (straight fixed safety ban. plugs) Patchcord set (straight fixed/ right angle ban. plugs) Alligator clip set (4 mm) Safety test tip set (4 mm) Maxigrabber set (4 mm) Acquisition and administration software With the acquisition and administration SI 655 Winlog software, you can: • display the measured data and parameters • analyze harmonics waveforms (up to level 25) • «data logging» • display and analyze the memorized data (only for MW 3500) Designed for Windows 3.1X, Windows 95 andNT Specifications subject to change without notice - FT350000A/98 Sefram SEFRAM Instruments & Systèmes 32, rue Edouard Martel 42009 - St Etienne Cedex Tel. +33.(0).4.77.59.01.01 Fax. +33.(0).4.77.57.23.23 For assistance and ordering Metrix Electronics plc Mountfield House 659, High Street - Kingswinford West Midlands - DY6 8AL Tel. +44 (0) 1384 402731 Fax. +44 (0) 1384 402732