K13.1.1G4 ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT •Comparable light output to 26W, 32W, 42W and 2x26W CFL while consuming 14, 19, 26 and 37 watts. • No harmful ultraviolet or infrared wavelengths • No lead or mercury PRODUCT SPECIFICATIONS DESIGNER SERIES 6” 1100/1500/2000/3000 LUMEN LED ROUND DOWNLIGHT OPEN APERTURE SD6 SERIES Optics Cone: Self-flanged, clear Alzak® satin (SASF) cone • Alzak® cone with low iridescent finish is standard • Others Alzak finishes are available; see trim options • Computer-optimized reflector maximizes fixture efficiency • Deep regression of source produces a very low glare system with 40º cut-off to lamp and lamp image • Lensed mixing chamber conceals the LEDs to produce uniform aperture luminance Electrical LED Light Engine: Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture • 2700K, 3000K, 3500K and 4100K color temperatures available • CRI>80 • Cast aluminum heat sink integrated directly with housing provides superior thermal management with LEDs operating below manufacturer’s published junction temperature to ensure attainment of rated life of the LEDs • Light engine mounts directly to heat sink and is easily replaceable • Light engine/reflector system produces 900 to 2900 lumens while using only 14 to 37 watts of energy and incorporates the latest generation of high lumen LEDs. LED Driver: Power factor >0.9 • Easily replaceable from above or below the ceiling • Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming • For a list of compatible dimmers, see LED-DIM • For other Dimming options see ‘Rough-in’ ordering options Life: Rated for 50,00 hours at 70% lumen maintenance Type Cat. No. Project: Notes: Mechanical Housing: Heavy gauge cold rolled steel with black finish • Universal housing design installs in suspended grid, plaster or drywall • Integral cast aluminum heat sink conducts heat away from LED light engine • Light engine and driver are accessible from above and below ceiling and can be upgraded to accommodate future technology improvements. Mounting Frame: Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely holds cones in ceiling • Accommodates ceilings up to 3/4” thick • For thicker ceilings; consult factory Mounting Bracket: Mounting brackets have 3” vertical adjustment and accept proprietary Tru-Lock bar hangers, 1-1/2” C-channel and flat linear bars (ordered as accessories) or 1/2” EMT, 3/4” and 1-1/2” lathing channel (by others) • One-piece Tru-Lock bar hangers have integral T-bar locking screws and alignment notches for locating and locking fixture in the center or 1/4 tile increments Junction Box: Junction box rated for eight No. 12 AWG 90° C branch circuit conductors (4-in, 4-out) DIMENSIONS 7˝ 6˝ Dia. 6-3/4˝ Dia. Ceiling Cutout 7-3/8˝ Dia. Labels and Listings • • • • • UL listed for feed through and damp locations • I.B.E.W. Union made Wet Location listing available, see reflector ordering options. EMI complies with FCC 47, Part 15, Class A • UL and cUL, RoHS complaint Energy Star qualified, see page 2 for designated products ARRA compliant 14-3/4˝ 13-1/8˝ Warranty: 5 years when used in accordance with manufacturing guidelines. Product specifications subject to change without notice. (120/277V) 15-5/8˝ (347V) ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately. Example: SD6-1530U Example: SD6-WHF ROUGH-IN LIGHT ENGINE COLOR LUMENS TEMP. VOLTAGE OPTIONS SD6 TRIM COLOR FINISH OPTIONS ACCESSORIES: SD6 11 27 U 15 30 ▲ 1100 2700 120-277V 1 1500 3000 120V 2000 3500 277V 20 30 3000 35 40 4100 2 ▲ 3 347V F Fuse and Fuse Holder BP120/277V Emergency Battery Pack with Remote test switch ▲R Reverse Phase Dimming (120V only) ▲D DALI Control Dimming (1100/1500/2000Lm) ▲PDLutron Dimming Driver CPChicago Plenum NLnLight Dimming Pack Controls (0-10V) (Not compatible with CP option) SA F Specular SF Satin CG * QF Semi-Specular (*Clear only) Gold WT Blank for White Wheat Clear PA Pewter PF White Painted flange (Not required with ‘WHF’) WET Wet Location (Clear glass lens standard) HB-TL 25” Tru-Lock grid ceiling bar hangers, Pair HB-52 52” C-Channel Bar Hangers, Pair HB-28 28” C-Channel Bar Hangers, Pair SCA6-* Sloped Ceiling adapter *Angle must be specified when ordering; Available in 5˚, 10˚, 15˚, 20˚, 25˚, 30˚ Example: SCA6-20 BR Bronze BA Black Specify universal voltage for Standard 0-10V Driver required voltage for R, D and PD Driver options Consult factory WHF White ▲Specify 08/16 Rev.8 1300 South Wolf Road • Des Plaines, Illinois 60018 PHONE 800-367-5866 • FAX 888-708-6578 www.junolightinggroup.com ENGINEERING DATA Voltage Light Engine Lumens CCT Input Current Input Wattage Input Frequency THD% Power Factor Voltage Light Engine Lumens CCT Input Current Input Wattage Input Frequency THD% Power Factor 2700K 0.12 14.3 10.98 0.989 2700K 0.06 14.3 16.88 0.865 K13.1.1G4 (Consult factory for 347V) 120V 1100 3000K 3500K 0.121 0.115 14.4 13.6 50/60Hz 10.25 10.5 0.9855 0.9855 277V 1100 3000K 3500K 0.06 0.057 14.5 13.7 50/60Hz 15.7 15.68 0.8724 0.8677 4000K 0.11 13.0 2700K 0.168 20.1 10.92 0.9848 9.01 0.993 4000K 0.055 13.1 2700K 0.078 19.8 15.77 0.8599 15.89 0.915 120V 1500 3000K 3500K 0.161 0.155 19.2 18.5 50/60Hz 8.48 8.62 0.9938 0.9946 277V 1500 3000K 3500K 0.075 0.073 19.1 18.3 50/60Hz 14.52 14.75 0.9194 0.905 4000K 0.15 17.8 2700K 0.238 28.6 8.95 0.9889 7.5 0.996 4000K 0.071 17.7 2700K 0.106 27.9 14.66 0.900 14.27 0.948 120V 2000 3000K 3500K 0.226 0.216 27.1 25.8 50/60Hz 6.97 7.19 0.9993 0.9954 277V 2000 3000K 3500K 0.101 0.097 26.5 25.4 50/60Hz 13.59 13.95 0.9472 0.9453 4000K 0.205 24.5 2700K 0.333 39.8 7.41 0.9959 8.06 0.993 4000K 0.093 24.0 2700K 0.151 39.1 14.31 0.9316 14.48 0.933 120V 3000 3000K 3500K 0.322 0.307 38.4 36.6 50/60Hz 8.04 8.38 0.9938 0.9935 277V 3000 3000K 3500K 0.147 0.141 37.9 36.1 50/60Hz 12.72 13.4 0.9308 0.9243 4000K 0.294 35.2 8.24 0.9977 4000K 0.135 34.6 12.93 0.9253 Energy Star Qualified: SD6 Product # Fixture Configurations = Energy Star SD6-(XX)(YY)U; SD6-SAF SD6-SAQF ‘Reverse Phase’ Dimming (-R) SD6-(XX)(YY)(Z)-R; SD6-SAF SD6-SAQF 2700K, 3000K, 3500K & 4100K CCT Initial Footcandles Catalog Number: SD6-2035U; SD6-SAF PHOTOMETRIC REPORT Test Number: PR10132892 Total Lumen Output: 1903 Lumens Luminaire Efficacy: 78 lm/w (4100K); 74 lm/w (3500K) 70 lm/w (3000K) Luminaire Spacing Criteria: 0.85 Luminaire: Clear specular Alzak® reflector. Open bottom. CIE-Type: Direct 90º 85º 200 400 75º 600 800 65º 1000 1200 1400 1600 55º 45º 1800 35º 2000 2200 2400 2600 2800 3000 0º 25º 5º 15º Distance to Illuminated Plane (Feet) Lumen Package: CCT: 1100 / 1500 / 2000 / 3000 (XX = 11, 15, 20, 30) 3000K / 3500K / 4100K (YY = 30, 35, 40) Lumen Package: CCT: Voltage: 1100 / 1500 / 2000 / 3000 (XX = 11, 15, 20, 30) 3000K / 3500K / 4100K (YY = 30, 35, 40) 120V (Z = 1) Footcandles Footcandles Beam Center Beam Edge Beam Diameter 6’ 68.4 23.9 6.3’ 7’ 50.2 17.6 7.4’ 8’ 38.5 13.4 8.4’ 9’ 30.4 10.6 9.5’ 10’ 24.6 8.6 10.5’ 11’ 20.3 7.1 11.6’ 12’ 17.1 6.0 12.7’ 13’ 14.6 5.1 13.7’ 14’ 12.6 4.4 14.8’ 15’ 10.9 3.8 15.8’ Luminance Data Candlepower Angle Distribution (Candelas) in Degrees Candela/M2 Angle Candela Lumens 45° 232 0° 2461 55° 198 5° 2419 231 65° 0 15° 2238 635 75° 0 25° 1512 700 85° 0 35° 530 333 Zonal Lumen Summary 45° 3 2 Zone Lumens% %Fixture 55° 2 2 0-30° 1565 82.3 65° 0 0 0-40° 1898 99.8 75° 0 0 0-60° 1903 100.0 85° 0 0 0-90° 1903 100.0 Lumen Multiplier:3000 x 1.50 90-180° 0 0.0 1500 x .75 0-180° 1903 100.0 1100 x .55 AVERAGE INITIAL FOOTCANDLES Reflectances: 80% Ceiling, 50% Walls, 30% Floors Luminaire Room Cavity Ratio Spacing RCR1RCR4RCR8 5’ x 5’ 84 70 56 6’ x 6’ 59 49 39 7’ x 7’ 43 36 29 8’ x 8’ 33 27 22 9’ x 9’ 26 22 17 10’ x 10’ 21 18 14 11’ x 11’ 17 14 12 12’ x 12’ 15 12 10 COEFFICIENTS OF UTILIZATION - % (Zonal Cavity Method) Effective Floor Reflectance 20% PCC 80 7050 30 100 PW 7050 3010 70 50 3010 503010503010503010 0 0 118 118118 118 116 116116 116 111 111 111 106 106 106 101 101 101 99 1 113 111108 106 111 109107 105 105 103 101 101 100 98 98 97 96 94 2 108 104100 97 106 102 99 96 99 96 94 96 94 92 93 91 90 88 3 103 97 93 89 101 96 92 89 94 90 87 91 88 86 89 87 85 83 4 99 92 87 83 97 91 86 82 89 85 81 87 83 80 85 82 80 78 5 94 87 81 77 93 86 81 77 84 80 76 82 79 76 81 78 75 74 6 90 82 76 72 89 81 76 72 80 75 72 78 74 71 77 73 71 69 7 86 77 72 68 85 77 71 68 75 71 67 74 70 67 73 70 67 65 8 82 73 68 64 81 73 68 64 72 67 64 71 66 63 70 66 63 62 9 79 70 64 60 77 69 64 60 68 63 60 67 63 60 67 63 60 59 10 75 66 61 57 74 66 61 57 65 60 57 64 60 57 64 60 57 55 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (800) 367-5866 • Fax (888) 708-6578 Visit us at www.junolightinggroup.com Printed in U.S.A. ©2016 Acuity Brands Lighting, Inc. K13.1.1G4 2700K, 3000K, 3500K & 4100K CCT Initial Footcandles Catalog Number: SD6-2035U; SD6-SASF PHOTOMETRIC REPORT Test Number: PR10132891 Total Lumen Output: 1764 Lumens Luminaire Efficacy: 72 lm/w (4100K), 69 lm/w (3500K) 65 lm/w (3000K) Luminaire Spacing Criteria: 0.89 Luminaire: Clear satin Alzak® reflector. Open bottom. CIE-Type: Direct 90º 85º 200 400 75º 600 800 65º 1000 1200 1400 1600 55º 45º 1800 35º 2000 2200 2400 2600 2800 3000 0º 25º 5º 15º Distance to Illuminated Plane (Feet) Candlepower Distribution (Candelas) Angle 0° 5° 15° 25° 35° 45° 55° 65° 75° 85° Candela Lumens 2041 1997 191 1790 508 1385 641 542 340 89 69 12 11 0 0 0 0 0 0 6’ 56.7 7’ 41.7 8’ 31.9 9’ 25.2 10’ 20.4 11’ 16.9 12’ 14.2 13’ 12.1 14’ 10.4 15’ 9.1 Luminance Data Angle in Degrees Candela/M2 45°6626 55° 1145 65° 0 75° 0 85° 0 75º 750 1000 65º 1250 1500 1750 2000 55º 5 45º 2250 35º 2500 2750 3000 3250 3500 3750 0º 25º 5º 15º Distance to Illuminated Plane (Feet) Candlepower Distribution (Candelas) Angle 0° 5° 15° 25° 35° 45° 55° 65° 75° 85° Candela Lumens 3691 3629 346 3357 952 2268 1050 795 499 5 4 3 3 0 0 0 0 0 0 6.8’ 7.9’ 9.1’ 10.2’ 11.3’ 12.4’ 13.6’ 14.7’ 15.8’ 17.0’ %Fixture 76.0 95.3 99.8 100.0 0.0 100.0 Footcandles Footcandles Beam Center Beam Edge 6’ 102.5 7’ 75.3 8’ 57.7 9’ 45.6 10’ 36.9 11’ 30.5 12’ 25.6 13’ 21.8 14’ 18.8 15’ 16.4 Luminance Data Angle in Degrees Candela/M2 45° 437 55° 298 65° 0 75° 0 85° 0 Beam Diameter Reflectances: 80% Ceiling, 50% Walls, 30% Floors Luminaire Spacing 5’ x 5’ 6’ x 6’ 7’ x 7’ 8’ x 8’ 9’ x 9’ 10’ x 10’ 11’ x 11’ 12’ x 12’ RCR1 78 54 40 31 24 20 16 14 Room Cavity Ratio RCR4 64 45 33 25 20 16 13 11 RCR8 50 35 26 20 15 13 10 9 COEFFICIENTS OF UTILIZATION - % (Zonal Cavity Method) 1100 x .55 Catalog Number: SD6-3035U; SD6-SAF PHOTOMETRIC REPORT Test Number: PR10132882P Total Lumen Output: 2856 Lumens Luminaire Efficacy: 81 lm/w (4100K), 78 lm/w (3500K) 74 lm/w (3000K) Luminaire Spacing Criteria: 0.85 Luminaire: Clear specular Alzak® reflector. Open bottom. CIE-Type: Direct 90º 85º 18.7 13.7 10.5 8.3 6.7 5.6 4.7 4.0 3.4 3.0 Zonal Lumen Summary Zone Lumens% 0-30° 1339 0-40° 1680 0-60° 1760 0-90° 1763 Lumen Multiplier:3000 x 1.50 90-180° 0 1500 x .75 0-180° 1763 2700K, 3000K, 3500K & 4100K CCT Initial Footcandles 250 500 Footcandles Footcandles Beam Center Beam Edge AVERAGE INITIAL FOOTCANDLES 35.8 26.3 20.2 15.9 12.9 10.7 9.0 7.6 6.6 5.7 Zonal Lumen Summary Zone Lumens% 0-30° 2348 0-40° 2847 0-60° 2854 0-90° 2855 Lumen Multiplier:2000 x 0.67 0 1500 x 0.50 90-180° 2855 1100 x0.37 0-180° Beam Diameter 6.3’ 7.4’ 8.4’ 9.5’ 10.5’ 11.6’ 12.7’ 13.7’ 14.8’ 15.8’ Effective Floor Reflectance 20% PCC 80 70 503010 0 PW7050 30 10 70503010 5030 10 503010 503010 0 0 118118118 118 116116116116 111111 111 106106106 102102102 99 1 113110108 106 111108106104 104102 101 10099 98 97 96 95 93 210810399 96 10510198 95 98 95 93 9593 91 929089 87 31029691 87 1009590 87 92 88 85 9087 84 888583 81 49790 85 81 96898480 8782 79 858178 838077 76 59384 79 75 91837874 8277 74 807673 797572 71 68879 74 69 87797369 7772 69 767168 747168 66 78475 69 65 82746965 7368 64 726764 716764 62 88070 65 61 79706461 6964 60 686360 676360 58 97667 61 57 75666157 6560 57 646056 635956 55 107363 57 54 72635754 6257 53 615753 605653 52 AVERAGE INITIAL FOOTCANDLES Reflectances: 80% Ceiling, 50% Walls, 30% Floors Luminaire Spacing 5’ x 5’ 6’ x 6’ 7’ x 7’ 8’ x 8’ 9’ x 9’ 10’ x 10’ 11’ x 11’ 12’ x 12’ RCR1 127 88 65 50 39 32 26 22 Room Cavity Ratio RCR4 105 73 54 41 32 26 22 18 RCR8 85 59 43 33 26 21 17 15 COEFFICIENTS OF UTILIZATION - % (Zonal Cavity Method) %Fixture 82.2 99.7 100.00 100.0 0.0 100.0 Effective Floor Reflectance 20% PCC 80 7050 30 100 PW 7050 3010 70 50 3010 503010503010503010 0 0 118 118118 118 116 116116 116 111 111 111 106 106 106 101 101 101 99 1 113 111108 106 111 109107 105 105 103 101 101 100 98 98 97 96 94 2 108 104100 97 106 102 99 96 99 96 94 96 94 92 93 91 90 88 3 103 97 93 89 101 96 92 89 94 90 87 91 88 86 89 87 85 83 4 99 92 87 83 97 91 86 82 89 85 81 87 83 80 85 82 80 78 5 94 87 81 77 93 86 81 77 84 80 76 82 79 76 81 78 75 74 6 90 82 76 72 89 81 76 72 80 75 72 78 74 71 77 73 71 69 7 86 77 72 68 85 77 71 68 75 71 67 74 70 67 73 70 67 65 8 82 73 68 64 81 73 68 64 72 67 64 71 66 63 70 66 63 62 9 79 70 64 60 77 69 64 60 68 63 60 67 63 60 67 63 60 59 10 75 66 61 57 74 66 61 57 65 60 57 64 60 57 64 60 57 55 Fixtures tested to IES recommended standard for solid state lighting per LM-79-08. Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (800) 367-5866 • Fax (888) 708-6578 Visit us at www.junolightinggroup.com Printed in U.S.A. ©2016 Acuity Brands Lighting, Inc.