HALO
®
HALO LED H7 Se r i e s
H750TEM6 is a dedicated LED housing designed to provide Emergency Battery backup when used with Halo Emergency LED
Modules: 600 Series ML7068xxT120DEM. Housing includes an
LED Emergency Battery Backup Driver with Remote Test Switch.
H750TEM6 is listed for 15W, 120V with 600 Series LED modules.
Emergency rated housing is for use in Non-Insulated ceilings only.
Halo offers high quality downlighting along with the high efficacy of
LED – the result is great lighting and significant energy savings.
Catalog #
Type
Project
Comments
Date
Prepared by
DESIGN FEATUR E S
Housings
• Aluminum with white semi-gloss
paint finish.
Plaster Frame
• Galvanized steel frame. Housing
adjusts in plaster frame to
accommodate up to 1” ceiling
thickness.
• Regressed locking screw for securing hanger bars.
• Cutouts included for easily
crimping hanger bars in position.
- Simply insert the cable directly into the trap after connections are made.
- Accommodates the following standard non-metallic sheathed cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
LED Module Connections in housing
The H750TEM6 has two pre-wired
connectors for connection with 600
Series LED Modules for 120V power
GOT NAIL! Pass -N-Thru™ and emergency back-up.
Bar Hangers
• Power: 600 Series Halo LED • Pre-installed nail easily installs modules feature a plug-in line in regular lumber, engineered voltage wiring connector (UL and lumber and laminated beams.
CSA Listed Luminaire Disconnect). • Safety and guidance system This non-screw-base connection prevents snagging, ensures preserves the high efficacy rating smooth straight nail penetration and prevents use of low efficacy and allows bar hangers to be easily incandescent sources.
removed if necessary.
• Dimming:
• Automatic leveling flange aligns 600 Series: ML7068xxT120DEM
the housing and lets you hold the The luminaire power disconnect housing in place with one hand is connection for 900 Series LED while driving nails.
Modules, for use with standard • Housing can be positioned at any 120V phase-control dimmers.
point within 24” joist span.
• Emergency Backup:
• Pass-N-Thru™ feature allows bar - The ML7068xxT120DEM hangers to be shortened without emergency LED modules are removing from plaster frame.
pre-wired with a plug-in wiring • Score lines allow “tooless” connector for emergency back-up
shortening for 12” joists.
connection to a mating connector
• Bar hangers may be repositioned in the H750TEM6 emergency 90°.
housing
• Integral T-bar clip snaps onto Electrical Connections into housing
T-bars - no additional clips Emergency housing requires two
required.
power inputs.
Slide-N-Side™ Junction Box
1) Normal power to the LED • Positioned to accommodate Module for occupant switching straight conduit runs
or dimming (600 Series uses • Seven 1/2” trade size conduit 120V normal power input from a knockouts with true pry-out slots
dimmer for dimming function • Slide-N-Side™ wire traps allow and switch on/off).
non-metallic sheathed cable to be 2) Emergency back-up: installed without tools and un-switched power circuit to without removing knockouts.
the battery back-up driver.
• Accepts a wide range of A qualified electrician must ensure
non-metallic (type NM) sheathed appropriate installation per cables - the standard cable types applicable national and local codes.
used in lighting in both U.S. and For 600 Series Emergency LED
Canada.
Modules ML7068xxT120DEM - Allows wiring connections to be Normal Power: 120V
made outside the junction box
Emergency back-up power: 120V
www.cooperlighting.com
Warranty
Cooper Lighting provides a three
year limited warranty on Halo LED
Luminaires which includes the LED Recessed Housing, LED Light
Engine, and LED trims.
Compliance
Labels
• UL/cUL 1598 Listed Luminaire (Emergency listed U.S. only)
• UL/cUL Listed for Feed Through
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Wet Location
with select trims
• Rated for 15W maximum
Qualification
Can be used to meet High Efficacy
luminaire requirements (when used
with compliant Halo LED modules
and designated trims):
• State of California Title 24
• International Energy Conservation Code (IECC)
AIR-TITE Compliant
• Washington State Energy Code
• New York State Energy Conservation Construction Code (NY-ECCC)
• Certified under ASTM-E283
H750TEM6
6” New Construction
Emergency Backup
Non-IC Housing
For Halo 600 Series
Emergency LED Modules
ML7068xxT120DEM and
49x Halo LED Series
Trims
FOR USE IN
N O N - I N S U L AT E D
CEILINGS
High Efficacy LED
Housing
Emergency Battery Backup
Energy Data
Operating Temp: 0°C to 55°C
Input Voltage: (Dual) 120/277 VAC*
Input Frequency: 60Hz
Input Power: 2.0W
Emergency Operation: 90 min.
* 120V only with ML7068xxT120DEM LED
modules.
H750TEM6
Housing Data
When used with ML7068xxT120DEM
modules.
Rated Wattage: 15W, 120V
When used with compliant
Halo LED Modules and Trims
ADV110424
rev 7/28/11
H750TEM6
DIMENSIONS
7 inch (178 mm)
outer dimension
7-3/8 inch
(187 mm)
1/2 inch
(13 mm)
6-1/2 inch
(165 mm) outer dimension
14-1/2 inch
(370 mm)
PHOTOMETRY - EMERGENCY MODE, BATTERY POWER
For photometry under normal power load, refer to ML7068xxICAT120D photometric files online at www.cooperlighting.com.
Hallway Example -
9’-0” Ceiling - 6’-0” Width - 80/50/20 Reflectance
g
cin
spa
600 Series LED
g
cin
spa
Test No. SP20048
3000°K LED Emergency Module
494SC06
Open Reflector, Specular Clear
H750TEM6
6" Halo LED Emergency Housing - 600 Series
ILB2407
Iota EM Battery (Integal to housing)
Hallway
9´-0˝
6'-0"
8'-0"
10'-0"
Average
7.32
5.49
4.54
Maximum
8.0
6.1
4.9
Minimum
4.2
3.6
3.4
Avg/Min
1.74
1.53
1.34
Max/Min
1.9
1.69
1.44
Total Delivered Lumens: 440
Halo
LED
Downlights
Emergency
Backup
Fixture Spacing O.C.
Floor Illuminance (fc)
g
cin
spa
ML706830T120DEM
6´-0˝
Color Temperature as tested: 3000°K
Color Temperature
2700°K
3000°K
3500°K
4000°K
Multiplier
0.9397
1.00
1.0553
1.1055
Note:1.This application example is provided to represent typical fixture performance.
Field results may vary.
2.For typical lumen values with other color temperatures use the applicable multiplier.
H750TEM6
ORDERING INFORMATION
SAMPLE NUMBER:
Complete unit includes H750TD010EM housing, Halo LED 600 Series Emergency Module ML7068xxT120DEM and Halo LED 49x series trim o r d e r e d s e p a r a t e l y ( r e f e r t o 6 0 0 S e r i e s E m e r g e n c y M o d u l e s p e c i fi c a t i o n s f o r f u r t h e r i n f o r m a t i o n ) .
Emergency Backup Housing
H750
H750= LED Housing with LED
connections (high efficacy
compliant)
TEM6
TEM6= 6˝ Dedicated LED Non-IC listed, AIR-TITE, New Construction Housing for Halo LED
600 Series dedicated 120V Emergency Modules, with prewired connections for LED
power, and Emergency Backup from emergency driver included on housing.
ML7 LED 600 Series Modules
ML7068xxT120DEM
ML706
ML706= LED Module, 600 Series
8
8= 80 CRI
Nominal CCT
27= 2700°K
30= 3000°K
35= 3500°K
40= 4000°K
T120D
EM
T120D=Non-IC Listed,
120V for
standard 120V
dimming
EM=Emergency Connection
for mating connection
with the H750TEM6
emergency housing
H7 LED Downlight Trims
H7 LED Trims Accessories
White Reflector and white trim ring
White Baffle and white trim ring
Haze Reflector and white trim ring
Specular Clear Reflector and white trim ring
Frost Lens, white baffle and trim ring, Shower rated
Solite® Regressed Lens, upper specular reflector, White baffle and trim ring with
anti-microbial paint (standard), Shower rated
493SCS06 Solite® Regressed Lens, upper specular reflector, Specular Clear reflector and white
trim ring, Shower rated
493HS06
Solite® Regressed Lens, upper specular reflector, Haze reflector, and white trim ring,
Shower rated
493SNS06 Solite® regressed Lens, upper specular reflector, Satin Nickel reflector and trim ring, Shower rated
493TBZS06 Solite® Regressed Lens, upper specular reflector, Tuscan Bronze reflector and trim ring,
Shower rated
493BBS06 Solite® Regressed Lens, Black baffle with white trim ring, Shower rated
493PS06
Solite® Regressed Lens, upper specular reflector, White reflector and trim ring with anti-microbial
paint, Shower rated
495WW06 Wall wash with semi-specular clear reflector, specular kick reflector and lens, white trim ring
495PWW06 Wall wash with white reflector, specular kick reflector and lens, white trim ring
491WBS06 Polymer Lensed Trim, White Baffle & Ring Non-electrically conductive (plastic) front, Shower rated
494P06
494WB06
494H06
494SC06
492PS06
493WBS06
494OPTIC 6" Over-Optic Diffuse Lens for use with Open LED Trims
(494 family), Shower rated.
Oversize Trim Ring
OT490WH 6" Oversize white die-cast trim ring 9-1/4" O.D. Attaches
to LED module, substitute for standard trim ring shipped
with trims.
OT403P
Oversize White Plastic Ring, 6" I.D. x 8" O.D.Ring slips
behind standard LED trim ring.
OT400P
Oversize White Metal Ring, 6" I.D. x 9-1/4" O.D.Ring slips
behind standard LED trim ring.
Designer Trim Rings, Thin Profile
TRM490WH White die-cast trim ring
TRM490SN Satin Nickel die-cast trim ring
TRM490TBZ Tuscan Bronze die-cast trim ring
TRM490BK Black die-cast trim ring
TRM490PC Polished Chrome die-cast trim ring
Solite® is a registered trademark of AGC Flat Glass North America
www.cooperlighting.com
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 486.4801
Cooper Lighting 5925 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX 905.568.7049