E-700
SERIES
SIGNAL
CONVERTERS
■ DESCRIPTION
E-700 Series signal converters are new generation microcontroller based industrial instruments in a plastic case. E-700
Series are general purpose converters which can be used to
convert thermocouples, resistance thermometers and other
sensor voltages, currents or pulses to standard currents.
The E-700 Series have a wide-range of applications, especially
for integration of SCADA, DCS, PLC systems through RS485
interface unit.
Filtering features avoid the effect of electrical noise activity in
industrial areas.
The configuration of the converter is performed by PC using a
software program supplied by Elimko. The RS232 connection
hardware is also available from Elimko.
■ TECHNICAL SPECIFICATIONS
Accuracy Class
0.5
(0.2 for linear outputs)
Noise Suppression
120 dB at 50 Hz
Operating Temperature
-10÷50°C
Operating Voltage
85–265 V AC
85–375 V DC
20–60 V AC
20–85 V DC
Min. Scale for Pulse Input
10 Hz
Max. Scale for Pulse Input
5 KHz
Output Signal
0–20 mA, 4–20 mA
Output Mode
Forward/Reverse
programmable
Output Resolution
For 0–20 mA 1/4000
Input/Output Isolation
750 V AC
Input Resistance
T/C, mV : ≥ 1 M Ω
mA
: ≤ 51 Ω
Linearization
On/Off
(Programmable for T/C & R/T)
Temperature Compensation
0–50°C
On/Off
(programmable for T/C)
Broken Sensor Protection
Programmable up/down scale
Configuration Interface
RS232
Communication Interface
RS485
Power Consumption
Max 7 VA
Mounting
Snaps on M36 DIN
(EN 50022) Rails
Protection Class
IP 54
Weight
300 gr
Input Signal
Pulse Input
T/C
R/T
mV
mA
pulse
NPN, PNP sensors,
potential free contact
27
■ STANDARD WORKING LIMITS
Inputs
Type
Min.
Max.
Inputs
Type
Min.
Max.
Cu-Const
Type-U* -200°C
600°C
Pt%10Rh-Pt
Type-S
0°C
1760°C
Cu-Const
Type-T
-200°C
400°C
Pt%13Rh-Pt
Type-R
0°C
1760°C
Fe-Const
Type-L*
-200°C
850°C
Pt%18Rh-Pt
Type-B
60°C
1800°C
Fe-Const
Type-J
-200°C
1100°C
Cr-Al
Type-K
-200°C
1300°C
Pt-100
∝=0.385 -200°C
840°C
NiCr-Ni
Type-K
-200°C
1300°C
Cr-Const
Type-E
-200°C
1000°C
Nicrosil-Nisil
Type-N
-200°C
1200°C
* DIN 43710 Standards, others conform to IEC 584.
mV
-2000 mV 2000 mV
mA
Pulse
0 mA
20 mA
0.1 Hz
10 KHz
■ ORDERING GUIDE
E-700 Series Controllers
E-700 - W - 1 - Y - Z
Standard Features
Programmable by the user
Inputs
mV (T/C) and Resistance (R/T)
mA
pulse
0
1
2
Isolation
Isolated
1
Communication
None
RS485
0
1
Power Supply
85–265 V AC / 85–375 V DC
20–60 V AC / 20–85 V DC
0
1
Examples
E - 700 - 0 - 1 - 1 - 0
E - 700 - 1 - 1 - 0 - 1
T/C or R/T converter, isolated, with RS485 MODBUS works with 220 V AC
Current converter, isolated, works with 24 V AC
■ DIMENSIONS
* The company’s policy is one of continuous product improvement. We reserve the right to modify the information contained herein without notice.
28