www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
Rev. B 1-20-161
20 1 6 N E W P R O D U C T S
20 1 6 N E W P R O D UC TS
AR-15 TAC-30
.223 - .556 - .204
ACCUMAX AR-15 BARREL COOLER - #390247
Case Pack of 4
• Cools your barrel in half the time
• Fits any Mil-Spec AR-15
• High pressure fan with dual motor
bearings for long life
• Integral wind tunnel directs air
through the chamber
• Powered by 12v Li-ion rechargeable battery
• 3-4 hour run time per charge
Use the Striper Rail to load
from 20 round boxes!
4
3
2
1
0
1
7
2
3
4
5
7
5
Case Pack of 6
8
6
#110005
5
8
ULTRA PORTABLE TARGET STAND KIT
6
4
5
3
4
2
3
1
2
X
0
X
The Caldwell® Ultra Portable Target Stand Kit is your All-N-1 Target Kit for
the Range! This compact set up has your stand, backer clamps and targets
all in one package. The stand, clamps and backer are reusable and easy to
assemble. This kit packs down to 12” x 18” in size for easy transport.
1
1
0
2
1
3
3
4
5
7
7
12
6
502
# 105
QC
12”x18
5 ” Sight-In
4
6
8
3
2
1
0
1
2
8
Case Pack of 4
• Ultra-Portable design
• Extra large backer can hold 12”x18” targets
• Great for sighting in or patterning
• Collapses for easy transport
• Includes 8 Silhouette targets and
8 high contrast Sight-In targets
6
MAG CHARGER® TAC 30 - #397493
STRIPPER RAIL
5
20 ROUND BOXES
2
4
STRIPPER CLIPS
3
4
5
The all new Caldwell® Mag Charger® Tac-30 is the latest addition to the Mag Charger Family of Speedloaders.
Filling the Mag Charger Tac-30 has never been easier! The Tac-30 is designed to directly accept 20 live
rounds from any common 20 round ammo manufacturer box and will also conveniently accept up to three
10 round stripper clips.The entire process of filling the Mag Charger Tac-30 with ammo and loading all 2030 rounds into a magazine takes less than 10 seconds! Spend more time shooting and less time reloading
with the Caldwell MagCharger Tac-30!
2
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
3
20 1 6 N E W P R O D U C T S
20 1 6 N E W P R O D UC TS
DURAMAX
S E L F
G2 CHRONOGRAPH - #720002
Case Pack of 2
The G2 literally flips conventional Chronograph technology upside down. By inverting the system the G2 is capable of
measuring in adverse light conditions making the measurements more accurate than conventional chronographs, even
indoors. The light sensors were spaced 18” apart for more accuracy and the sunscreens have self-contained LED lights
when a little extra light is needed. Collapsible and compact, the system
is quick and easily deployed from its heavy duty storage case. Higher
accuracy was achieved by using a high speed 48 MHz processor and by
designing a circuit with an advanced data interface that allows each unit
to be computer calibrated at the factory after assembly. The end result is
the ability to provide much better accuracy than other chronographs on
the market (+/- .25%) and measures from 5 to 9,999 FPS.
Connect to your Smart
Phone via Bluetooth®!
Rechargeable LI-ION Battery
H E A L I N G
TA R G E T S
• Made of Ballistic Polymer for maximum durability
• Targets are self-healing. Shoot them thousands of times
• Rated for pistols or rifles from .22lr all the way up to 50 BMG
• Reactive targets; bounces, rolls, spins, or flips when hit
#897597 - 5” SQUARE
#897602 - 5” BALL
Case Pack 6
Case Pack 6
Front LED display shows
velocity information
• 18” sensor spacing for maximum accuracy
• Each unit factory calibrated to within +/- 0.25% accuracy
• Built in LED Light Kit
®
• Bluetooth to interface with Smartphone
• Rechargeable Lithium Ion Battery
• Ideal for Firearms, Archery, Airgun or Paintball
• Meters Per Second (MPS) or Feet Per Second (FPS) readings
• App displays velocity, logs data, notes, weather conditions
and easily exports via SMS or Email
• Carry bag included
• Heavy Duty height adjustable from 15” - 42” Tripod
• Includes 1/4-20 dovetail plate to attach to the
chronograph for quick assembly
PIC RAIL ADAPTER PLATE - #156716
Case Pack of 6
Hinged support bars lets you disassemble
and store the G2 easily
Inverted LED light panels makes shooting indoors easy
Entire system collapses and stores
in a high quality storage case
Included tripod can extend to a
height of 50” letting you shoot from
a standing position if needed
AR RECEIVER END PLATE SLING MOUNT
#390501
Case Pack of 6
• Ambidextrous for all shooters
• Accepts snap hook style attachments
• One solid steel plate
FREE App to Download!
A free App is available for download that displays the velocity
of each shot on the phone screen and records it with other
data identifying the load and environmental conditions. The
App also automatically calculates Average Velocity, Standard
Deviation, Min, Max and Velocity Spread for the shot string.
The data is stored and can be exported via Email or simply
recalled for reference at a later date.
4
www.BTIbrands.com
•
573.445.9200
ITAR controlled Item
•
Email: Sales@BTIbrands.com
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
5
20 1 6 N E W P R O D U C T S
20 1 6 N E W P R O D UC TS
AR MODULAR DUAL POINT SLING KIT
#156216
Case Pack of 4
• Ambidextrous receiver end plate included
• Premium spring loaded quick detach carabiners
• Use as a single point sling or detach second spring loaded
carabiner and set up as a standard dual point sling
• 2 “Quick Ditch” buckle options. Either use the Side release
buckle to remove the gun from the sling or use the spring
loaded carabiner to remove the sling from your body
• “Quick Ditch” buckle allows you to unsling your AR
without taking the sling off your shoulder
• Convenient side carry position
• Ambidextrous for all shooters
FAST CASE GUN COVER - #110039
The Caldwell® Fast Case Gun Cover protects firearms from all that Mother
Nature can throw at them. Durable ballistic fabric stands up to thorns, sticker
bushes, or any other abrasive surfaces. The PVC lined fabric provides a water
resistance to the firearm in rain and snow. The large bottom opening allows
the user to keep the firearm covered but still allows them to carry it with a
standard sling. The Caldwell Fast Case is very easy to put on and fast to take
off when the shot matters most.
AR Receiver End Plate with Sling Mount
• Ambidextrous for all shooters
• Accepts snap hook style attachments
• One solid steel plate
• End Plate Made in the USA
ITAR controlled Item
MAX GRIP SLING
• Durable ballistic fabric withstands abrasion and tough use
• Water resistant to keep your firearm dry
• Bottom opening allows for fast removal and the use of your firearm sling
• Fits rifles or shotguns from 40" - 54" in length
Case Pack of 4
#156219 - BLACK
#156214 - FLAT DARK EARTH
The Caldwell® Max Grip Sling’s ergonomic shape is designed to spread the
weight of the firearm for a comfortable carry. The over molded design of
the material grips your shoulder so the firearm stays put no matter how
strenuous your hike is. The sling is completely sealed to be scent free and not
take in any moisture as you hunt through all of the elements. If you want a
sling that is going to stay put and be comfortable to carry all day, the Caldwell
Max Grip is the sling for you!
OPTIC ARMOR SCOPE COVER
Case Pack of 6
#110036 - LARGE
#110037 - X LARGE
• 2mm thick neoprene
• Stretchable to fit the scope and stay put
• Prevents scratches, dust, dirt and moisture
• Built in scope lens cloth
• Large fits most hunting sized scopes
• Extra Large fits most target sized scopes
• Over molded ergonomic design
• Max Grip to stay put
• Includes quick detach metal sling swivels
• Adjusts from 20” to 41” in length
• 2.75” strap to spread the weight of the firearm
HP NEO SLING - #156218
Case Pack of 6
Case Pack of 4
The Caldwell® HP Neo Sling’s ergonomic shape is designed to
spread the weight of the firearm for a comfortable carry. The
neoprene design of the material grips your shoulder so the firearm
stays put and stretches slightly to cushion the firearm as you hike
through the woods. If you want a sling that is going to stay put and be
comfortable to carry all day, the Caldwell HP Neo is the sling for you!
• Neoprene ergonomic design
• Stretchable to stay put but also provide cushion
• Includes quick detach metal sling swivels
• Adjusts from 20” to 42” in length
• 2.25” strap to spread the weight of the firearm
6
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
7
The all new line of Caldwell® Tac Ops holsters, magazine pouches and duty belts offer everything a handgun owner needs! The Tac Ops retention
holsters are made of reinforced polymer, are designed to custom fit numerous handgun models and feature a trigger guard retention lock.
TAC OPS HOLSTER
The Tac Ops Covert IWB holsters ergonomic design provide users extreme comfort while being worn all day. The heavy duty carry belts look
great, are extremely robust, comfortable to wear and can withstand the weight of almost any handgun.
DROP LEG RIG
UNIVERSAL HOLSTER
MOLDED RETENTION HOLSTERS
ITEM #
• Semi rigid ballistic nylon construction keeps holster shape even when empty
• Extra magazine pouch with hook & loop strap closure
• Wide hook & loop strap secures holster to a belt or wide M.O.L.L.E. strap
• Dual gun security features:
• A semi rigid snap closure strap with a hook & loop over strap
• Small hook & loop horizontal strap for securing to M.O.L.L.E. straps
• Accepts medium framed semi autos and revolvers
• Retention strap height is adjustable using the included plastic shim to slide
the hook & loop attachment up and down the inside of the pocket
COVERT IWB HOLSTER
• 2 friction fit magazine holsters
• Magazine friction adjustment
• Wide contoured paddle style clip
• Bottom paddle clip retention posts
www.BTIbrands.com
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
............
•
®
• 2" wide synthetic material is semi rigid and won't warp or bend from use
• Full width and length hook & loop attachment makes this Duty Belt infinitely adjustable
• 2 sliding keepers per end of the belt keep folded hook & loop end
secure and free from snagging other equipment
• Full width heavy duty Dual Side Lock Buckle
• Secondary push button lock keeps buckle from any
accidental disengagement
#110075
Universal Holster . . . . . Medium frame semi autos . . . . . RH
Glock 19 (fits 19,23,32) . . . . . .
®
Glock 17 (fits 22,31) . . . . . . . .
®
Glock 26 (fits 27,33) . . . . . . . .
®
Glock 34 . . . . . . . . . . . . . . . . . .
®
Glock 42 . . . . . . . . . . . . . . . . . .
®
®
S&W M&P Shield . . . . . . . . . .
®
®
S&W M&P 9mm . . . . . . . . . . .
®
®
S&W M&P Compact. . . . . . . .
®
S&W Bodyguard 380 . . . . . . . .
®
S&W J frame revolver . . . . . . .
®
Taurus 24/7 . . . . . . . . . . . . . . . .
®
Taurus PT800 . . . . . . . . . . . . . .
®
Beretta 92 . . . . . . . . . . . . . . . . .
M1911 . . . . . . . . . . . . . . . . . . . . .
1911 3” . . . . . . . . . . . . . . . . . . . .
®
®
Sig Sauer P226 . . . . . . . . . . . .
®
®
Ruger LC9 . . . . . . . . . . . . . . .
®
®
Ruger LCP . . . . . . . . . . . . . . .
RH
RH
RH
RH
RH
RH
RH
RH
RH
RH
RH
RH
RH
RH
RH
RH
RH
RH
MAGAZINE HOLSTERS
#110071
#110072
#110073
#110074
Magazine Pouch
Magazine Pouch
Magazine Pouch
Magazine Pouch
......
......
......
......
®
Glock . . . . . . . . . . . . . . . . . . .Ambi
®
Taurus 24/7 . . . . . . . . . . . . . . .Ambi
®
Taurus PT800(B92) . . . . . . . . .Ambi
1911 . . . . . . . . . . . . . . . . . . . . .Ambi
#110076
#110077
#110078
#110079
#110080
#110081
#110082
#110083
#110084
Covert IWB . . . . . . . . .
Covert IWB . . . . . . . . .
Covert IWB . . . . . . . . .
Covert IWB . . . . . . . . .
Covert IWB . . . . . . . . .
Covert IWB . . . . . . . . .
Covert IWB . . . . . . . . .
Covert IWB . . . . . . . . .
Covert IWB . . . . . . . . .
#110085
Drop Leg Rig . . . . . . . . All molded accessories . . . . . . .Ambi
#110086
#110087
M.O.L.L.E. attachment . All molded accessories . . . . . . .Ambi
Belt Clip . . . . . . . . . . . . All molded accessories . . . . . . .Ambi
#110088
#110089
#110090
#110091
• Clip attaches to standard M.O.L.L.E. strapping at 3 points. Securing your holster
• Attach your holster or magazine rig to the M.O.L.L.E. clip.
The 3 point attachment keeps even heavy guns at the ready
RIGHT/LEFT
HANDED
Tac Ops
Tac Ops
Tac Ops
Tac Ops
Tac Ops
Tac Ops
Tac Ops
Tac Ops
Tac Ops
Tac Ops
Tac Ops
Tac Ops
Tac Ops
Tac Ops
Tac Ops
Tac Ops
Tac Ops
Tac Ops
COVERT IWB HOLSTERS
DUTY BELTS
M.O.L.L.E. ATTACHMENT
MAGAZINE HOLSTER
FITS
#110053
#110054
#110055
#110056
#110057
#110058
#110059
#110060
#110061
#110062
#110063
#110064
#110065
#110066
#110067
#110068
#110069
#110070
DUTY BELTS
• Model specific molded poly for secure fit
• Wide contoured paddle style clip
• Bottom paddle clip retention posts
• Rubberized “no slip” pad on back of paddle
• 360o adjustable holster positioning
• Included Allen wrench makes rotational adjustment quick and easy
8
• Vertical ride height adjustable
• Upper belt loop with inner hook & loop to secure to a duty belt
• “Quick Ditch” dual side release buckle for easy removal without removing belt
• 2 Elastic adjustable thigh straps with dual side release buckle clips
• 3 separate rotating attachment points for holsters, magazine pouches and other accessories
• Rigid polymer platform stays secure to the leg and won’t flop around when moving
MODEL
Duty Belt
Duty Belt
Duty Belt
Duty Belt
...........
...........
...........
...........
2” revolvers . . . . . . . . . . . . . . . .
3.2”5-3.75” semi autos . . . . . . . .
Sub compact semi autos . . . . . . .
3.75”-4.5” semi autos . . . . . . . . .
2”-3” revolvers . . . . . . . . . . . . . .
4” revolvers . . . . . . . . . . . . . . . .
3”-4” semi autos . . . . . . . . . . . . .
.22-.25cal semi autos . . . . . . . . .
4.5”-5” semi autos . . . . . . . . . . .
RH
RH
RH
RH
RH
RH
RH
RH
RH
Small 28”-36” waist . . . . . . . . .Ambi
Medium 34”-42” waist . . . . . . .Ambi
Large 40”-48” waist . . . . . . . . .Ambi
XL 48”-56” waist . . . . . . . . . . .Ambi
BELT CLIP ATTACHMENT
• Adjustable to fit belt widths from 1.25” -2.5”
• An internal adjusting bar has 2 Allen screws
to securely position the precise width
• The rotating attachment point lets you affix holsters
or magazine holsters for the utmost in customization
• The Duty Belt Clip can accommodate belts up to 3/8” thick
Semi Auto and Revolver holsters are shaped differently
• Smooth inside lining for quick and easy draw
• Robust yet flexible hanging clip accommodates belts up to 2” wide
• Hanging clip is sewn into holster for security and long lasting performance
• Foam layer protects handgun from sweat and moisture
• Ultra thin 3 layer soft PU laminate hugs handgun and provides comfortable wear
• Holster profiles change to match the gun type they accommodate
573.445.9200
•
Email: Sales@BTIbrands.com
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
9
20 1 6 N E W P R O D U C T S
LR TARGET CAMERA SYSTEM - #156726
Case Pack of 1
The Caldwell® Ballistic Precision Long Range Target Camera was designed by our team of engineers to be the best target camera system available today and affordable so all shooters
can have one. The one mile range delivers live streaming HD video footage of your target to your smart phone or tablet through Caldwell’s free app. The Caldwell Ballistic Precision
LR Target Camera comes with a premium storage case to store the entire system. A free app is available for download on your smart phone or tablet. It allows you to view live
streaming HD video, take pictures, record video and can calculate your group size too. The rechargeable lithium ion battery allows you to use the Target Camera for up to 6 hours.
If a more permanent setup is desired it features an external power jack to hook up to an alternative power source. The Caldwell Ballistic Precision LR Target Camera will become
one of your best friends on the shooting range and you won’t want to leave home without it.
• Streams live HD video up to 1 mile away
• Fully contained waterproof housings
• Breaks down into a compact storage case for easy transport
• High Definition camera in 720p
• Integrated rechargeable lithium Ion batteries for extended use
• Features an external power jack for more permanent installation
• Compatible with Android, iPhone® and most tablets
• Free Full featured App allows you to save pictures, add notes,
Calculate group size, save info and Record video
Entire system is completely
Water Proof
2 0 1 6 NE W P R O D U C TS
CORDLESS 75 LED VAULT LIGHT
#222009
AUTOMATIC CORDLESS 25 LED
VAULT LIGHT - #222008
Case Pack of 5
Case Pack of 5
• Auto ON/OFF sensor turns the lights on when you
open the vault and off after you close the vault
• Two 25 LED lights with 70 Lumens output each
• Auto ON/OFF light/motion sensor
• Strong magnet or screw attachment
• Uses 3 ‘AAA’ batteries each (not included)
• 70 Lumen output per light
• 6hr continuous runtime per light
• Standby time 8,700hrs
• Sensor range 5 meters
• Sensor angle 120o
• 75 LEDs with 95 Lumens output
• Strong magnet or screw attachment
• Uses 3 ‘AAA’ batteries (not included)
• 95 Lumens output
• 5hr continuous run time
• Mount it on walls or shelves to
illuminate dark corners
Extend transmitter or receiver to
a height of 7ft to achieve optimal
transmitting range.
Kit includes:
HD 720p Camera w/ night vision
positionable spring loaded camera clamp
Long Range transmitter w/ rechargeable battery
Smart Charger for LI-ION Battery can be used as power supply
Long Range Receiver w/ rechargeable battery
2x heavy duty Router stands
2x stake anchors
Storage case
HD camera is
infinitely positionable
with the articulated
camera clamp
The FREE downloadable App works with both Android & iPhone®s as well as
most tablets. The easy to use App lets you view your current shots without
having to leave your bench. It also allows you to take stills, and record video
of your shots. You can take notes right on the photos you take. The App
even has a group calculation feature that tells you the grouping size! You can
save all your info and images on the phone/tablet and pull them up later. No
more “back and forth” from the target with calipers!
LOCKDOWN VAULT TOP DISPLAY - #110092
®
#222000 - 6 each, 12” dehumidifier rods
#222008 - 3 each, 25 LED cordless vault lights (2 pack)
#222009 - 3 each, 75 LED cordless vault lights
#222501 - 3 each, Gun Concealment Magnets
#222111 - 3 each, Hygrometers
#222178 - 3 each, 750 gram Silica Cans
#222179 - 3 each, 450 gram Silica Bags
#222200 - 6 each, 4 Gun Handgun Racks
10
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
11
2 0 1 6 N E W P R O D U CTS
PERFECT SEAT HAND PRIMER
#110006
Quick thumb release
system allows you to
switch from small to
larger primers easily
Case Pack of 4
• Die cast zinc body with steel internal components
• Adjustable seating depths of 1 thousandth of an inch
• Hard stop so you can never crush a primer
• Primer tray with ridges for primer orientation
• Works with both small and large primers
• Comes with 12 shell holders to cover the
most popular cases
• Heavy Duty injection molded storage case
20 1 6 N E W P R O D UC TS
Self righting primer tray holds 100+ primers
Robust working components resist bending
even in the most powerful hands.
12 numbered shell holders
included in the kit cover the most
popular case sizes today. 3 extra
posts are included in the case so
that you can store custom or rare
shell holders in the same place.
Heavy Duty all metal
construction
Sift WET media
CASE PREP ESSENTIALS KIT
#909214
Case Pack of 4
wet/dry media separator - #507567
• Inside chamfer tool
• Outside deburr tool
• Large & small primer pocket uniformer/cleaner
• Large & small primer pocket crimp cutter tools
• Made of hardened high speed steel
CASE PREP EXPANSION KIT
#909215
Primer pocket
uniformer/cleaner
Case Pack of 4
• Made of hardened high speed steel (HSS)
• Large and small primer pocket uniformer/cleaner
• Large and small primer pocket crimp remover
• Standard 8-32 threads fits Case Trim & Prep Center's auxiliary shafts
12
www.BTIbrands.com
•
573.445.9200
Primer pocket
crimp remover
•
Email: Sales@BTIbrands.com
Case Pack of 2
• Ideal for both wet or dry cleaning processes!
• Perforated sifter allows media to fall through
while retaining cleaned brass!
• Includes 2 installed strainers to separate wet media from water!
• Includes two sifting handles for ambidextrous use when
separating brass from media
• Rugged rubber latch keeps sifter closed even with
heavy loads of brass and media
• Spill proof tub fully captures water, dry media and
stainless steel pins
• The tub top includes a mesh strainer to rinse
brass during wet separating to remove any
left over cleaning solution
• Mesh strainers for draining the water from the
tub base without losing stainless steel pins
www.BTIbrands.com
•
573.445.9200
Works great for
wet or dry media
separation!
Sift DRY media
•
Email: Sales@BTIbrands.com
13
2 0 1 6 N E W P R O D U CTS
PROFESSIONAL DIGITAL TRIGGER GAUGE
#710904
ROLL PIN STARTER SET - #710910
Case Pack of 4
• Ergonomic over molded design
• 0-12lbs range
• +/- .2 oz accuracy
• Load sensor directly contacts the trigger
• Feature max, min, average and live functions
• Audible indicator tone
• Low battery indicator
• Soft touch buttons
• Arm folds inside housing to protect the load
sensor when not in use
• Foam lined storage case
Case Pack of 4
The Wheeler Engineering® Roll Pin Punches are machined from hardened steel to prevent
bending or breaking while driving any size roll pin. The punches are designed with a
hemispherical tip to provide proper alignment of the roll pin to prevent damage to the
firearm and the roll pin. The 9 piece set includes: 5/16", 1/4", 7/32", 3/16", 5/32", 1/8", 3/32",
5/64", 1/16" punches in a nylon pouch.
Measure trigger
pull in lbs. or kgs.
• 9-piece set 1/16" through 5/16"
• Hardened Steel construction
• Hemispherical Tip
• Fitted Nylon Storage Pouch
Records MAX and
MIN Trigger pull
Records number of
trigger pulls in session
ARMORER’S HANDGUN SIGHT TOOL
#710905
20 1 6 N E W P R O D UC TS
Case Pack of 4
• Precision machined unit
• Designed in install, un-install or adjust front and rear dovetail sights
• Fully captures and supports slide so it won’t deform
• Works on all semi auto pistols
• Large 4 post drive knob to easily push the sight
• Reference marks for precise adjustments
PROFESSIONAL GUNSMITHING FILE SET - #710908
Case Pack of 4
The Wheeler Engineering® Professional Gunsmith File Set is perfect for many different gunsmithing jobs. The set comes with a wide grade of
files from a rough rasp all the way down to a super extra fine diamond plate. Whether your reshaping a wood stock or smoothing out an action,
this set is perfect for you.
DIGITAL F.A.T. WRENCH® - #710909
Case Pack of 4
• Ergonomic over molded design
• Large LCD Digital display for
ease of viewing
• 15 -100 in/lb. range
• +/- 2% accuracy
• Audible indicator tone
• Visual indicator
• Low battery indicator
• Soft touch buttons
• Injection molded storage case
Visual ARCH bars increase
the closer you get to the
target Torque Spec.
PEAK mode will hold the highest
torque value for 5 seconds, while LIVE
mode displays the current torque value
1 - 8” half round file
1 - 8” flat file
1 - 6” square file
1 - 6” triangle file
1 - 6” round file
1 - 4-n-1 Rasp
1 - file cleaning brush
1 - extra fine diamond plate
1 - stick of file chalk
1 - small flat coarse grit diamond file
1 - small round coarse grit diamond file
1 - small triangle coarse grit diamond file
1 - small flat medium grit diamond file
1 - small round medium grit diamond file
1 - small triangle medium grit diamond file
1 - small flat fine grit diamond file
1 - small round fine grit diamond file
1 - small triangle fine grit diamond file
Measure in lb-in, kg-cm, N-m
Current Torque Readout is easy to see
14
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
15
2 0 1 6 N E W P R O D U CTS
ultra armorer’s kit - #156559
Case Pack of 2
The Wheeler Delta Series AR-15 Armorer’s Kit ULTRA contains every tool a gunsmith or armorer needs to complete a full rifle build, make
repairs or perform maintenance on AR-15/M16 platform rifles.This kit can perform over 50 different operations and functions of AR-15 building
and maintenance. Delta Series tools are designed with specific features to perform functions with precision and ease. Each tool is constructed
of the highest quality materials to deliver the best performance at a great value. The Wheeler Delta Series AR-15 Armorer’s Kit ULTRA is the
most comprehensive AR-15 build and maintain kit on the market.
• AR Armorers Vise
• AR-15 Combo Tool
• Torque Wrench
• AR-15 Armorer’s Bench Block
• AR-15 Roll Pin Install Tool Kit
• Upper Vise Block Clamp with
Gas Tube Alignment Tool
• Maintenance Mat with Exploded view AR-15
• Pivot Pin & Roll Pin Installation Tool
• AR Front Sight Tool
• Delta Ring Tool
• Strap Wrench
• AR-15 Bore Guide
• AR-15 Adjustable Receiver Link
• Bore Brush, .22 Cal.
• Bolt Carrier Brush
• Chamber Brush
• Magazine/Upper Receiver Brush
• Nylon Brush Handle
• Double-ended General
Cleaning Brush
• Cleaning Pick Set
• Custom Fitted
Carrying Case
20 1 6 N E W P R O D UC TS
AR BOLT CATCH INSTALL PUNCH KIT
AR TRIGGER GUARD INSTALL TOOL
#710906
#710907
Case Pack of 4
Case Pack of 4
• Makes installing or changing trigger guards quick and easy
• Comes with an install pin and an un-install pin
• Pins conveniently store in the frame
• Precisely control and install the trigger guard roll pin
to prevent damage to the receiver
• The old method of hammering the roll pin into the
receiver can easily damage your serialized lower
• Durable construction, made of aluminum with a
mil-spec anodized finish
• Start bolt catch roll pin easily with starter punch
• Finish installation flush with the finishing punch
• Flat on one side for proper alignment
ar-15 roll pin install tool kit
#952636
Case Pack of 4
Complete kit for installing every AR roll pin without damaging or marring your firearm!
Kit includes:
• Bolt Catch Install Tool Kit
• AR Trigger Guard Install Tool
• 3 Starter Punches and 3 Driver Punches
• Two Sided Hammer
6 Steel punches in sizes: 1/16, 5/16 & 3/32
• 3 with counter-bored tips to start roll pins
• 3 with indexing tips to finish roll pins
Bench block to assist in all aspects of an AR-15 build
individual pic rail risers
#156506 - Pic Rail Riser .5"
#156505 - Pic Rail Riser .7"
#156504 - Pic Rail Riser 1"
Install all roll pins
16
Install tricky bolt catch roll pin
www.BTIbrands.com
•
573.445.9200
•
Case Pack of 4
Case Pack of 4
Case Pack of 4
Replace and install trigger guards
Email: Sales@BTIbrands.com
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
17
2 0 1 6 N E W P R O D U CTS
16 foot extendable pole saw - #655232
20 1 6 N E W P R O D UC TS
CORDLESS 40V LITHIUM POLE SAW
Case Pack of 6
In-line 8” Saw
#655236 - Cordless 40 Volt Lithium Pole Saw . . . Case Pack of 1
#655237 - Spare 40 Volt Lithium Battery . . . . . . . . . Case Pack of 4
#655238 - Pole Saw Replacement Bar . . . . . . . . . . . . Case Pack of 4
#655239 - Pole Saw Spare Chain . . . . . . . . . . . . . . . . . . Case Pack of 4
#110051 - Pole Saw 3.8 ft Extension . . . . . . . . . . . . . . Case Pack of 4
• Extends to 16’
• Collapses to 4’
• 12” Blade
• Blade made of SK5 Steel
• Tapered teeth that are impulse hardened
I-Beam Aluminum
Construction
Premium high carbon steel
MegaBite XP blade
™
Hooyman® saws use a high
carbon SK5 steel in a tapered
blade design, with an impulse
hardened 4 edge tooth. This
improves tooth geometry for
unmatched cutting performance
and a longer cutting life.
POLE SAW LOPPER ATTACHMENT - #655233
The
extension
arms
on
saw
are
the
Hooyman®
constructed of aircraft grade
aluminum in a super strong
I-beam configuration. They are
lightweight, sturdy and strong
In-line design
The folding saw slides and
locks into the extension arm
with a clever in-line channel
groove for a remarkably tight
connection
40V
Heavy duty 8” chain saw for large branches. Angled head
design to prevent binding while cutting.
LITHIUM-ION
Auto-Oiler
Product Specifications
Case Pack of 6
• Fits all Hooyman Pole Saw Poles
• Blade made of SK5 Steel
• 2.25” Curved Bypass Cutting Blade
• Cuts branches up to 1.5” in diameter
• Features integral rope winding attachment
®
Model . . . . . . . . . . . . . . . . . . . . .655236
Battery . . . . . . . . .40V Max Lithium-Ion
Extended Length . . . . . . . . . . . . . . . . 10’
Collapsed Length . . . . . . . . . . . . . . . 48”
Chain Type . . . . . . 33 drive links, 3/8” LP
Length of bar . . . . . . . . . . . . . . . . . . . 8”
Unit Weight . . . . . . . . . . . . . . . . . . 9.7lbs
The Saw is equipped with an auto oiler and a clear view
window so you can check the oil level easily
16’ Of Reach
• Under 10 lbs
• In-line motor
• Collapses to 48”
• Extends to 10’
• Hassle free auto-oiler
• Portable carrying bag
• Easy chain adjustment
• Up to 70 minutes of power
• Battery and Charger Included
With all 3 sections attached the pole saw extends to 10’
allowing around 16’ of reach. Additional pole section
available to extend reach to 20’. Product #110051
Ergonomic Design
Under 10lbs.
Made of light weight yet durable material the pole saw
weighs in under 10lbs.
Compact Design
MEGABITE™ HANDSAWs
Megabite 8” - #110050 Case Pack of 6
Megabite Compact 6” - #110049 Case Pack of 6
APPROX.
40v lithium ion battery
Hooyman® saws use a high carbon SK5 steel in a
tapered blade design, with an impulse hardened 4 edge
tooth. This improves tooth geometry for unmatched
cutting performance and a longer cutting life. Megabite™
handsaws provide two locking positions for use in a
standard cutting position and hyper extended position
to provide a wide variety of cutting methods.
The Hooyman® 40v 2AH Lithium-Ion delivers a longer run time,
higher performance and fade-free power with no memory loss,
unlike other conventional batteries. Snaps in and out of saw
easily and includes a battery charge indicator for power level
checks. Charges in around 60 minutes.
www.BTIbrands.com
Ergonomic grips provide a comfortable and secure hold
for a long day of use.
40V 2AH BATTERY
• Up to 70 minutes of power
• 40-Volt high power rechargeable 2Ah Lithium-Ion battery
• LED charge indicators
• Weight: 1.lbs/0.7kgs
• 40% Longer life than conventional batteries
• Megabite™ Compact folds down to 6.5”
• Megabite™ folds down to 9.5”
• 2 position lock back blade
• MegaBite™ XP 4-edge tooth design
• Premium high carbon steel blade
• Ergonomic rubber overmolded handle
18
Separating into 3 sections the pole saw breaks down to
48” in length and stores conveniently inside the provided
carrying bag.
Delivers longer run time, higher performance and fadefree power with no memory loss. Snaps in and out of saw
easily and includes a battery charge indicator for power
level checks. Charge time: 60 minutes. Spare available
Product #655237
•
573.445.9200
•
Email: Sales@BTIbrands.com
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
Highly Portable
Weighing under 10lbs and collapsing down to 48” the
pole saw becomes a ultra portable power saw with the
provided carrying case.
19
20 1 6 N E W P R O D U C TS
SURVIVAL RING SAW - #110104 Case Pack of 4
HAND HELD CHAIN SAW - #110052 Case Pack of 4
• Cuts wood, plastic, bone and soft metals
• Light-weight pocket sized steel wire saw
• Designed to cut in both stroke directions
• Cuts through 4” diameter logs with ease
• Length: 27.5”
• Steel wire is designed to cut in
both stroke directions
• Light-weight pocket sized chain saw with carrying case
• High-strength, heat-treated steel
• Designed to cut in both stroke directions
• Cuts through 4” diameter logs easily
• Nylon webbed hand loops
• Chain length: 25.5”
• Weight: 4.25 ounces
Nylon Handles - For a secure grip
Large rings let you add a
stick or rod for added grip
39.5”Total Length
2 0 1 6 NE W P R O D U C TS
TRANSPORTER RANGE VISE - #782805
Case Pack of 2
• Holds up to 4 long rifles
• Clamps on tabletops up to 3-5/8” in thickness
• Holds up to 40lbs
• Includes 2 removable forks for cleaning a gun
• Non-marring surface
• Built in drink holder
• Everything disassembles and stores in 3 built in pockets making a nice carry bag
• 3 pockets are great for holding pistols while in use
• Usable bag measures 9”x 20” x 9”
• Overall Footprint measures 11.5” x 23” x 9”
Carrying Case - With belt loop
Steel wire is designed to cut in both stroke directions
Chain saw teeth are designed to cut in both stroke directions
MICRO CHAIN SAW - #110105
• Light-weight pocket sized chain saw
• Designed to cut in both stroke directions
• Cuts through 2” diameter logs easily
• High-strength, heat-treated steel
• Key chain carrying case
• Chain length: 18.5”
HIGH LIMB CHAIN SAW
WITH ROPE - #110103 Case Pack of 4
Case Pack of 4
Carrying Case - With key chain ring
• High-strength, heat-treated steel
• Dual sided teeth for cutting on either side
• Designed to cut in both stroke directions
• Cuts through 6” diameter logs easily
• Chain length: 49.5”
• Can reach limbs up to 28’ high
High Limb Throw Bag - Fill the
included throw bag with sand,
rocks, or dirt to add weight, then
attach using the carabiner to
one handle of the rope. Toss the
bag high and over the limb that
will be cut.
Steel ring handles let you add a
stick or rod for increased grip
MAINTENANCE MATS
M&P® Model 11” x 17” Mat - #110009
Glock® Model 11” x 17 Mat - #110008
Case Pack of 6
Case Pack of 6
• Screen printed exploded view of an M&P® handgun or a
Glock® model pistol for easy part identification
• Perfect for cleaning & disassembling firearms
• No-mar, padded neoprene surface protects the firearm’s finish
• Absorbs oils & solvents keeping surface dry
• Helps keep track of small gun parts
• Rolls up to easily fit in your range bag
• Large 11” x 17” size
Chain saw teeth are designed to cut in both stroke directions and both sides of the chain
Chain saw teeth are designed to cut in both stroke directions
TIPTON® is a registered trademark of Battenfeld Technologies, Inc. GLOCK®
is a registered trademark of Glock, Inc. (Glock). This product is not licensed,
manufactured or distributed by Glock.
20
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
21
2016 NEW PRODUCTS
SIGMA ELECTRONIC EAR MUFFS
RANGE MUFFS
#110042
#110094
Case Pack of 6
• Folding compact design
• Fixed padded headband
• Adjustable cushioned ear cups
• ANSI S3.19-1974 Rated
• NRR 20 noise reduction
• Amplifies low level sounds
• Compresses High Db noises
• Uses 4 “AAA” batteries
(INCLUDED)
Case Pack of 6
• Ultra Lightweight
• Compact Folding Design
• Cushioned PVC ear cups
• Padded Headband for comfort
• NRR 33 noise reduction
2016 NEW PRODUCTS
Introducing the all new Smith & Wesson® line of range bags and gun cases. Featuring highly durable ballistic fabric with
a laminate backing, oversized zippers, heavy duty hardware, and easy to grab zipper pulls. These products are engineered
to stand up to extreme use in harsh conditions.
RECRUIT TACTICAL RANGE BAG - #110013
Case pack of 4
FEATURES
INSIDE:
• Includes 2 padded, zippered single handgun cases 13.5” x 9.5”
• Internal padded ammo bag with 2 zippered side pockets
2 adjustable hook and loop dividing walls
2 sets of vertical accessory pouches.
• Clip on nylon beverage holder with cinch down closure
MAIN BAG:
• Adjustable 2” wide padded carrying strap with heavy
duty spring clip buckles
• Dual zippered opening gives ample room to access
the main storage area
• Reinforced wrap around nylon carrying handles with
rubber foot skids on the bottom for extra protection
• 2 inside full length accessory pockets.
• Internal Dims of main compartment: approx. 18” l x 10” w x 10” h
• External dims: approx. 22” l x 14” w x 10.5” h
MAGNUM HANDGUN CASE - #110022
LOW PROFILE RANGE MUFFS
#110093
Case Pack of 6
• Padded Headband for comfort
• Compact Folding Design
• Cushioned PVC ear cups
• Ultra Lightweight
• NRR 25 noise reduction
Case Pack of 6
FEATURES
INSIDE:
• Internal Dims: 21” l x 9.5” h x 1.5” d
• Padded walls for protection
OUTSIDE:
• Full length zipper for easy access
• Full wrap around heavy duty nylon handles for security
• 2 external accessory/magazine pouches with full flap
hook & loop closure: 4.5” w x 8” h x 2” d
DEFENDER HANDGUN CASES
Case Pack of 6
#110018 - Small Defender Handgun Case
#110019 - Medium Defender Handgun Case
#110020 - Large Defender Handgun Case
FEATURES
INSIDE:
• Perfect for transporting or storing individual handguns
• Padded walls for protection
OUTSIDE:
• Full length zipper for easy access
• Small - External dims: approx. 9” l x 6” h x 1.5” d
• Medium - External dims: approx. 13” l x 7” h x 1.5” d
• Large - External dims: approx. 16” l x 9” h x 1.5” d
22
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
23
2016 NEW PRODUCTS
2016 NEW PRODUCTS
SINGLE POINT TACTICAL SLING KIT
OFFICER TACTICAL RANGE BAG
#110030
#110023
Case Pack of 6
INSIDE:
• Includes 2 padded, zippered single handgun cases 13.5” x 9.5”
• Internal padded ammo bag with 2 zippered side pockets
2 adjustable hook and loop dividing walls
2 sets of vertical accessory pouches.
• Clip on nylon beverage holder with cinch down closure
• Ambidextrous receiver end plate included
• Premium spring loaded quick detach carabiner
• Flexible high density bungee strap with nylon over case
• “Quick ditch” side release buckle
• Fully adjustable
• Convenient and safe side carry position
• Ambidextrous for all shooters
• Quick to deploy
AR Receiver End Plate with Sling Mount
• Ambidextrous for all shooters
• Accepts snap hook style attachments
• One solid steel plate
• End Plate Made in the USA
ITAR controlled Item
DELTA OPS MULTI-GUN CASE - #110047
ALPHA ELECTRONIC EAR MUFFS
#110041
Case Pack of 4
Case Pack of 4
INSIDE:
• Internal Dims: 44” w x 10.5” h x 2” d
• 2 full length gun slots with removable padded center divider
• Padded internal perimeter ring for added protection
• Removable 3 point adjustable shoulder strap harness.
It is padded with a chest strap, 2 M.O.L.L.E. straps on
each side and 2 metal Triangle rings.
• 2 dual side release buckles on the straps allow for “quick ditch”
and the entire harness is attached to the bag with heavy
duty metal spring clips.
• 2” wide nylon shoulder strap with movable and removable
shoulder pad as heavy duty metal spring clips for attachment
Case Pack of 6
• Folding compact design
• Padded headband
• LED “ON” indicator light
• Audio input jack plays your MP3 music
• Adjustable cushioned ear cups
• ANSI S3.19-1974 Rated
• NRR 23 noise reduction
• Amplifies low level sounds
• Compresses High Db noises
• Uses 2 “AAA” batteries
(INCLUDED)
OUTSIDE:
• Full length dual zipper closure with full length fold over
flap with snap closure
• Heavy Duty “Drag” strap at one end of the bag
• 2 long external zippered pouches with internal straps and
dual side release buckles
• 10 single M.O.L.L.E. straps on one side with an additional 18,
1” wide nylon loops for added customization
MAIN BAG:
• Adjustable 2” wide padded carrying strap with heavy
duty spring clip buckles
• Dual zippered opening gives ample room to access
the main storage area
• Reinforced wrap around nylon carrying handles with
rubber foot skids on the bottom for extra protection
• 2 inside full length accessory pockets.
• Internal Dims of main compartment: approx. 18” l x 10” w x 10” d
• External dims: approx. 22” l x 14” w x 10.5” d
PRO TAC HANDGUN CASE - DOUBLE
#110029
Case Pack of 6
INSIDE:
• 2 internal padded pistol pockets
• Each pocket can accept a revolver with up to an 8” barrel
• Internal pocket dimensions: 14” x 6”
OUTSIDE:
• External dims: 15.5” l x 10.5” h x 4” d
• Full length double zipper opening of main compartment
• One side has 2 external zippered pockets: 6” l x 6” h x 1” d
• One side has 3 double pistol mag pouches with hook & loop flap closures
• Front, back, and bottom padded walls for protection
• Full wrap around heavy duty nylon carry straps
PRO TAC HANDGUN CASE - SINGLE
#110028
Case Pack of 6
INSIDE:
• Internal padded pistol pocket
• Internal pocket can accept a revolver with up to an 7” barrel
• Internal pocket dimensions: 14” x 7”
OUTSIDE:
• External dims: 14.5” l x 8” h x 3” d
• Double zipper opening of main compartment
• One side has 2 external zippered pockets: 6” l x 6” h x 1” d
• One side has 3 double pistol mag pouches with hook & loop flap closures
• Front, back, and bottom padded walls for protection
• Full wrap around heavy duty nylon carry straps
24
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
25
2016 NEW PRODUCTS
PRO TAC BACKPACK - #110027
DUTY SERIES BACKPACK - #110017
Case Pack of 6
INSIDE:
• Full length dual zipper opening
• 12” x 13” elastic pocket. Perfect for laptop or papers
• Internal zippered top accessible “valuables” pocket
• Internal dims. 15” w x 20” l x 6” d
• 1 zippered mesh pocket inside front flap
INSIDE:
• Full length dual zipper opening
• 11” x 12” elastic pocket. Perfect for laptop or papers
• 2 zippered mesh pockets inside front flap
• Internal zippered top accessible “valuables” pocket
• Internal dims: 12” w x 20” l x 5” d
OUTSIDE:
• Chest strap with dual side release buckle
• Adjustable waist strap
• Each side has 2 zippered accessory
pouches and a side carry strap
• Bottom has 3 rows of M.O.L.L.E.
strapping for added customization
• Deep External front flap pouch
with zipper opening
• Large external front flap pouch:
9” w x 11” l x 2” d
OUTSIDE:
• Chest strap with dual side release buckle
• Front flap zippered external pocket
• Large external front flap pouch
8” w x 10” l x 2” d
• External pouch has 2 clips for attaching
small accessories and 2 internal pouches
• External front flap strap with dual side
release buckle to secure a rolled up coat,
bed roll or other larger accessory
2016 NEW PRODUCTS
Case Pack of 6
PRO TAC GUN CASES
DUTY SERIES GUN CASES
INSIDE:
• 2 rows of wide M.O.L.L.E. strapping with 4 hook & loop
interchangeable straps to secure varying sizes of firearms inside case
• Front, back, and bottom stiff padded walls for semi rigid protection
ANARCHY BUG OUT BAG - #110021
Case Pack of 6
• Padded and contoured hip side with mesh fabric for breathability
• Heavy duty 2” wide adjustable nylon strap with removable padded
shoulder and “quick ditch” dual side release buckle
• Padded full length zippered side pocket
• 3 external side pockets with full hook and loop flaps and elastic retention
• The bottom of the pouch has 2 rows of M.O.L.L.E. strapping and 2
retention straps with Dual Side Release buckles
• 2 external end pouches, zippered with 3 rows
of M.O.L.L.E. strapping each
• Inside 3 rows of M.O.L.L.E. strapping
on one side of the main compartment
• Internal dims main compartment:
Approx. 15” x 4” x 8”
• External Dims:
Approx. 16” x 7.5” x 8.5”
26
www.BTIbrands.com
•
ESSENTIALS BUG OUT BAG - #110031
Case Pack of 6
• Padded and contoured hip side pads with mesh fabric for breathability
• Hook and Loop attachment to secure bag to a belt for a no shift ride
• Large adjustable shoulder strap with removable padded shoulder
and “quick ditch” Dual side release buckle
• Full size zippered side pocket for CCW carry
• Main compartment has 2 side
pockets and internal zipper
closure and full over flap with
Dual Side Release buckle closure
• Top flap has rigid top compartment
for delicate essentials
• Top flap has 1 row of M.O.L.L.E.
strapping and zippered
accessory pocket
• 2 dual zippered end pockets
with expandable mesh pouches
• The bottom of the pouch has
2 rows of M.O.L.L.E. strapping
and 2 retention straps with
Dual Side Release buckles
• Internal Dims main compartment:
9” x 3.5” x 8”
• External Dims:
13” x 12” x 4”
573.445.9200
•
Email: Sales@BTIbrands.com
OUTSIDE:
• Full length 2” wide adjustable shoulder strap with movable
and removable padded shoulder strap.
• Shoulder strap is attached by 2 heavy duty metal spring
clips and metal triangle rings.
• Full length double zipper opening of main compartment
• 31” long x 13” wide x 1.5” deep full flap zippered external pouch
• 48” Case External dims: approx. 48” l x 13” h x 3” d
• 42” Case External dims: approx. 42” l x 13” h x 3” d
• 36” Case External dims: approx. 36” l x 13” h x 3” d
#110024 - 36” Pro Tac Gun Case
#110025 - 42” Pro Tac Gun Case
#110026 - 48” Pro Tac Gun Case
• Padded fold over style long gun case with full length zipper
• Full length adjustable nylon shoulder strap
• Heavy Duty wrap around carry handles
• Half length zippered external pocket
• External center open pocket
• Re-enforced nylon strap on the bottom for added protection
• 45” length has 5 AR Mag pouches with hook & loop flap closures
• 40” length has 4 AR Mag pouches with hook & loop flap closures
• 34” length has 3 AR Mag pouches with hook & loop flap closures
#110014 - 34” Duty Series Gun Case
#110015 - 40” Duty Series Gun Case
#110016 - 45” Duty Series Gun Case
Case Pack of 6
Case Pack of 6
Case Pack of 6
Case Pack of 4
Case Pack of 4
Case Pack of 4
DUTY SERIES SHOOTING MAT - #110032
Case pack of 6
FEATURES
• Rolled out mat is 74” long x 34” wide
• Additional roll out panel on the end is 12” long x 32” wide
• Roll out panel has 9” x 4.5” hook & loop pocket for accessories
• Main pad is heavily padded for comfort
• 4 re-enforced grommets at the corners for security on the ground
• 3 re-enforced zones on main pad help keep knees and elbows secure
• Mat rolls up and secures with 2 wrap around
nylon straps with hook & loop fastening
• External nylon heavy duty carry handle
• Wide nylon shoulder strap with movable and removable shoulder
pad has heavy duty metal spring clips for attachment
• Made of weather resistant plasticized nylon
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com
27
2016 NEW PRODUCTS
HP NEO SLING - #35009700
HUNTER’S BINO STRAP - #35009701
Case Pack of 6
Case Pack of 6
A rugged rifle sling constructed of heavy duty neoprene providing a
strong but padded shoulder strap. Adjustable for a wide range of user
heights and rifle sizes, this strap is slip resistant so it will stay put and
be comfortable for the longest trek.
• Designed to securely hold
binoculars close to the chest
• Adjustable elastic straps to
guarantee perfect fit
• Built for the active
hunter/adventurer
• Helps eliminate neck stress
• Heavy Duty synthetic materials
are designed to be scent
resistant and won’t wear out
• Multiple mounting options for
binoculars included
REPLACEMENT O RINGS - #3005294
PRIMER ADAPTER PLUGS
Replacement O Rings for the T/C® STRIKE™ Muzzleloader.
For use on Primer Adapter Plugs. Pack of 3.
For use with the T/C® Adapt™ Breech System in the T/C® STRIKE™
Muzzleloader. Two options available, one for use with pellet loads and
the other for use with loose powder.
#3005265 - For use with pellet loads
#3005296 - For use with loose powder
BREECH & FIRE CHANNEL BRUSH SET - #3005562
A set of brushes designed specifically to clean the breech area and
the fire channel of the T/C® STRIKE™ muzzleloader.
28
www.BTIbrands.com
•
573.445.9200
•
Email: Sales@BTIbrands.com