DEER CART
MODEL: HEH00224
Weight Capacity: 300 Lbs.
Instruction and Safety Manual
MODEL: HEH00224
THANK YOU! for purchasing the Field & Stream Deer Cart by Primal Vantage Company Inc.
Deer Cart
Shown Folded
Warning
THINK SAFETY!
READ ALL INSTRUCTIONS PRIOR TO ASSEMBLING DEER CART
DO NOT assemble Deer Cart if any parts are missing or damaged
DO NOT sit in or ride on Deer Cart. Sitting or riding on Deer Cart may result in serious injury or death
DO NOT stand on Deer Cart. Standing on Deer Cart may result in serious injury or death.
Weight limit of this Deer Cart is 300 lbs.
DO NOT USE THIS PRODUCT BEFORE FULLY UNDERSTANDING ALL SAFETY WARNINGS AND INSTRUCTIONS. IF YOU HAVE QUESTIONS, ARE
UNSURE ABOUT ANY INFORMATION OR NEED ADDITIONAL INFORMATION CONCERNING YOUR PRODUCT, CONTACT OUR CUSTOMER
SERVICE DEPARTMENT AT 1-866-972-6168 OR VISIT WWW.TREESTANDCUSTOMERSERVICE.COM. KEEP AND MAINTAIN THIS SAFETY AND
INSTRUCTION MANUAL IN A SAFE LOCATION FOR FUTURE REFERENCE.
Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
SAFETY MUST BE YOUR FIRST PRIORITY WITH THIS PRODUCT
©2011 (rev 12/10)
DEER CART
MODEL: HEH00224
Weight Capacity: 300 Lbs.
A
B
Top Frame (1)
Bottom Frame (1)
E
D
C
F
Axle Housing (1)
Bushing (2)
Wheel (2)
Large Washer (2)
H
G
Clevis Pin (2)
J
Cotter Pin (2)
Tie-Down Strap (3)
Parts List
A
1 Top Frame
Part # DTF-224
B
1 Bottom Frame
Part # DBF-224
C
1 Axle Housing
Part # DA-224
D
2 Wheel
Part # DW-224
E
2 Bushing
Part # DB-224
F
2 Large Washer
Part # DLW-224
G
2 Cotter Pin
Part # DCP-224
H
3 Tie-Down Strap
Part # DS-224
J
2 Clevis Pin
Part # DPC-224
70 4 M12x70mm Bolt
70
M12x70mm Bolt (4)
A
B
D
C
Part # 1270
©2011 (rev 12/10)
Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
Customer Service Department 1-866-972-6168
www.treestandcustomerservice.com
MODEL: HEH00224
Assembly Instructions Page 1
Deer Cart
C
70
A
B
70
C
1. Attach Bottom Frame B to Axle Housing C to the
front holes using 1-M12x70mm bolt on each side.
(See Closeup for proper installation order).
2. Attach Front Frame A to Axle Housing C to the
rear most holes using 1-M12x70mm bolt on each side.
(See Closeup for proper installation order).
Axle
Housing
CLOSEUP
Insert a nylon washer on the bolt, then insert the bolt
through the Bottom Frame. Insert the larger nylon washer
between the Axle Housing and the Bottom Frame.
Continue to insert the bolt through the Axle Housing and
insert the last washer onto the bolt. Secure with the nut.
Bolt
Head
Nut
Washer
Larger
Nylon
Washer
Washer
Bottom
Frame
©2011 (rev 12/10)
Distributed by Primal Vantage Co. Inc. 685 Route 10 Randolph, NJ
Customer Service Department 1-866-972-6168
www.treestandcustomerservice.com
MODEL: HEH00224
Assembly Instructions Page 2
Deer Cart
E
F
J
J
E
3. Slide Large Washer F onto Clevis Pin J .
Insert Clevis Pin through Wheel D .
Slide Bushing E onto Clevis Pin .
G
C
4. Insert Clevis Pin J through Axle Housing C .
Insert Cotter Pin G through hole on Clevis Pin.
5. To fold Deer Cart, simply pull on the
Spring Clips on both the Top and Bottom
Frames and fold together.
Spring Clip
©2011 (rev 12/10)
Distributed by Primal Vantage Co. Inc. 685 Route 10 Randolph, NJ
Customer Service Department 1-866-972-6168
www.treestandcustomerservice.com