Part Number 856067 140 MHz SAW Filter Data Sheet Features • • • • • • • • For broadband applications Typical 3 dB bandwidth of 7.1 MHz High attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Replaces Sawtek P/N 851915 (BW 3dB=7.0 MHz) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 13.30 x 6.50 x 1.50 mm SMP-53C Bottom View 1 2 3 4 5 10 9 8 7 6 1.50 NOM. 1.65 MAX. 0.64 13.3 1.91 1.80 Single-ended Configuration Pin No. Description 10 RF input 5 RF output 1,6 Ground 2,3,4 Case Ground 7,8,9 Case Ground R0.51 6.50 2.31 1.02 Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 – 6µm Ni plating Subject to change or obsolescence without notice Rev C 05/08 © TriQuint Semiconductor Page 1 of 5 Part Number 856067 140 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) 0 to +70 °C Parameter (3) Center Frequency Minimum Insertion Loss Lower 1 dB Bandedge (5) Upper 1 dB Bandedge Lower 3 dB Bandedge (5) Upper 3 dB Bandedge Lower 40 dB Bandedge (5) Upper 40 dB Bandedge Amplitude Variation 136.925 -143.075 MHz Phase Linearity 136.925 -143.075 MHz Group Delay Variation 136.925 -143.075 MHz Absolute Delay Relative Attenuation (5) 15 -132 MHz 148 -250 MHz 250 -280 MHz 280 -350 MHz Source Impedance (6) Load Impedance (6) Minimum Typical (4) Maximum Unit 143.075 143.42 135.425 - 140 24.5 136.7 143.3 136.45 143.55 135.6 144.4 25.75 136.925 136.58 144.575 MHz dB MHz MHz MHz MHz MHz MHz - 0.6 0.9 dB - 2.25 3.5 deg - 40 1.6 65 - nsec µsec 50 50 42 50 - 60 60 45 60 50 50 - dB dB dB dB Ω Ω Notes: 1. All specifications are based on the TriQuint test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to minimum insertion loss 6. This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 33pF 18nH 10 50 Ω Single-ended Input 50Ω Ω Subject to change or obsolescence without notice 5 47nH 47pF 50Ω Ω 1,2,3,4,6,7,8,9 Rev C 05/08 © TriQuint Semiconductor 50 Ω Single-ended Output Page 2 of 5 Part Number 856067 140 MHz SAW Filter Data Sheet Typical Performance (at room temperature) Subject to change or obsolescence without notice Rev C 05/08 © TriQuint Semiconductor Page 3 of 5 Part Number 856067 140 MHz SAW Filter Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 33pF 18nH 10 50 Ω Single-ended Input 5 47nH 50Ω Ω 47pF 50 Ω Single-ended Output 50Ω Ω 1,2,3,4,6,7,8,9 Marking PCB Footprint 8.86 SAWTEK 856067 XXXXXX 2.51 6.70 1.22 2.00 .69 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel ID dot 24.8 2.7 Ø330 0.3 4.0 2.0 Ø1.5 A 1.75 11.5 13.9 24 Direction of travel Ø102 Ø20.2 Ø13.0 2.0 2.3 Section A-A 7.1 12.0 Ø1.5 A Dimensions shown are nominal in millimeters Packaging quantity: 2000 units/reel Subject to change or obsolescence without notice Rev C 05/08 © TriQuint Semiconductor Page 4 of 5 Part Number 856067 140 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Symbol Minimum Maximum T Tstg -40 -40 +70 +85 Unit o C C o Important Notes Warnings • • Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance • This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability • Compatible with JESD22-B102, Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters Soldering Profile RoHS Information Other Technical Information TriQuint’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Rev C 05/08 Or contact one of our worldwide Network of sales offices, Representatives or distributors © TriQuint Semiconductor Page 5 of 5