Committed to excellence
50+
TOP
Components
Semiconductors
Passive Components
Electromechanical Components
Storage Technologies
Displays & Boards
Wireless Technologies
50+
TOP
Components
Content
Semiconductors
Power Products
Analog & Mixed Signal
Sensors
Memories
Microcontrollers
Optoelectronic Components
4 - 13
14 - 15
16 - 23
24 - 26
27 - 33
34 - 39
Passive
Capacitors
Resistors
Inductors & Timing Devices
40 - 45
46 - 49
50 - 51
Electromechanical Components
Connectors
Switches
Relays
Fuses
52 - 60
61
62
63
Storage Technologies
64
65
66
67
HDD
Industrial Mainboard
Optical Drive
CFast Card
Displays & Boards
68
Touch Monitors
Wireless Technologies
69
70 - 71
72 - 74
75
Cellular Module
GNSS Receiver
Short Range
RFID
Rutronik
Central control with worldwide
service on site
2
RUTRONIK
76 - 79
Markus Krieg
Managing Director Marketing
Electronic components are key in more and more applications in all different
market segments.
To achieve a perfect and efficient design, based on the lateset technology, a broad
variety of different products are needed. Not only the performance of the single
component determinsthe quality of the application, but the interaction between
all devices.
Rutronik offers a wide variety of products from first-class and innovative suplliers,
combined with design support, logistics and after-sales services.
The Top 50 selection should give you a taste of our complete portfolio.
Please use our global support team to ensure your and finally also our success
with your innovative, efficient and reliable application.
50
+
TOP
Components
RUTRONIK
3
50+
TOP
Components
800 V T-Series
High Temperature Triacs
With the introduction of the new 800 V T-Series family, ST is further strengthening its
leadership position in the market of low-power discrete Triacs. The new family exhibits
superior dynamic performances (noise immunity and turn-off capability) and an extended
temperature range up to 150 °C. Moreover, the breakdown capability has been raised up to
800 V. The new 800 V T-Series family perfectly meets demanding requirements of today’s
applications, enabling size and cost reduction of the heatsink and of the Triac itself. The
present portfolio is composed of 16 A devices, in three different gate-current capabilities
(10, 20 and 35 mA), housed in TO-220 insulated. The whole family will be extended during
2012 to different power ranges and TO220FP.
Features
Applications
■ 800 V, 16 A Triacs
■ 600V capability with 150 °C max Tj
■ High static and dynamic commutation
- 2 times better vs. Std. BTA / BTB family
- 4 times better noise immunity vs. std.
BTA/BTB family
■ Three quadrants
■ Snubberless device
■ Package is RoHS (2002/95EC) compliant
■ Tab insulated, voltage = 2500 Vrms
■ Extended temperature range
■ Three different IGT: 10, 20, 35 mA
■ 10 mA version for resistive loads
-Water heater
-Electric heater
-Coffee machine
■ Home appliances
-Fan
-Pump
-Solenoid
-Motor control
-Washing machine
-Fridge
-Blender
■ Lighting
■ Inrush current limiting circuits
■ Overvoltage crowbar protection circuits
■ General purpose AC line load switching
Benefits
■ Superior dynamic performance due to
ST high temperature process
■ 10 mA version can be directly driven by
microcontroller
Series
T1610T-8I, T1620T-8I, T1635T-8I
4
RUTRONIK
SEMICONDUCTORS
PowerDI®5
Bipolar Transistors
that bring big space savings
With a footprint of just 26 mm, PowerDI®5 occupies 47 % less space than SOT223 and
60 % less space than DPAK. In terms of off-board height, PowerDI®5’s 1.1 mm compares
favorably with SOT223’s 1.65 mm and DPAK’s 2.3 mm.
PowerDI®5’s minimum copper power rating of 0.74 W means that it delivers excellent.
Features
Applications
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Footprint just 26 mm
43 % smaller than SOT223
60 % smaller than TO252 (DPAK)
Maximum height just 1.1 mm
(SOT223=1.65 mm) (TO252=2.3 mm)
Rated up to 3.2 W
NPN and PNP bipolar productmix
Low saturation voltage
Fast switching characteristics
High power dissipation
LED driver
Motor driver
DC/DC converter
Data-& telecommunication
Battery charging
Regulator circuits
Latest generation Bipolars offer lower specific
on-resistance than MOSFETs
RUTRONIK
SEMICONDUCTORS
5
50+
TOP
Components
600V CoolMOSTM C6/E6
Power MOSFET
Affordable energy efficient power MOSFETs from the market leader.
CoolMOSTM C6/E6 is Infineon’s sixth generation of high voltage power MOSFETs designed
according to the revolutionary superjunction (SJ) principle.
The new CoolMOSTM C6/E6 series combines our experience as the leading SJ MOSFET
supplier with best-in-class innovation. The resulting C6/E6 devices provide all benefits of
a fast switching SJ MOSFET while not sacrificing ease of use. C6/E6 achieves extremely
low conduction and switching losses and can make switching applications more efficient,
more compact, lighter and cooler. Moreover, it has the best cost / performance ratio on the
market today. The C6 devices have been optimized for ease of use - the E6 devices have
been optimized for highest efficiency in DCM applications.
Features
Applications
■ Low area specific on-state resistance
(Ron * A)
■ Low energy storage in output
capacitance (Eoss)
■ High body diode ruggedness
■ Low reverse recovery charge (Qrr)
■ PFC stages for server, PC silverbox,
LCD & PDP TV, lighting, adapter
■ PWM stages for server, PC silverbox,
lighting, adapter, solar
Benefits
■ Easy control of switching behavior
■ Better light load efficiency compared
to C3
■ Proven CoolMOSTM quality combined
with high body diode ruggedness
guarantee outstanding reliability
■ Lower price compared to previous
CoolMOSTM generations
■ More efficient, more compact, lighter
and cooler
6
RUTRONIK
SEMICONDUCTORS
MDmesh™ V
Power MOSFET
Flagship of HV MOSFETs portfolio of ST is the MDmesh™V family, the 5th generation of
ST proprietary MDmesh™ superjunction technology. With RDS(on) values around 30% less
than previous generation, MDmesh™ V is a real breakthrough addressing applications
where superior power density and the highest efficiency are required. MDmesh™ V portfolio contains today more than 40 types, all in mass production.
STMicroelectronics is the worldwide
leading supplier of high-voltage Power
MOSFETs. With a product portfolio
comprising devices ranging from 400 V
up to 1500 V, in both standard-planar
and superjunction technologies, and with
the widest package portfolio today on the
market, ST is able to provide HV Power
MOSFETs tailored for almost any application of today’s life.
Applications
■ SMPS (computers, very high efficiency
adapters and telecom)
■ Lighting (electronic ballast, HID)
■ Displays (TVs, monitors)
■ Solar converters
Features
■ Lowest RDS(on) today on the market in
the most popular packages
■ Superior switching performances
■ 100 % avalanche tested
Benefits
■ Higher BVDSS margin in application
■ Easy-to-drive
■ Less EMI sensitive
RUTRONIK
SEMICONDUCTORS
7
50+
TOP
Components
600 V / 650 V N-Channel
E Series
Power MOSFETs
Vishay announces a new series of 600 V and 650 V n-channel power MOSFETs with
ultra-low maximum on-resistance and a wide range of current ratings. Based on Vishay’s
next generation of Super Junction Technology, the E Series MOSFETs offer ultra-low gate
charge and low gate charge times on-resistance, a key figure of merit (FOM) for MOSFETs
used in power conversion applications.
Features
Applications
■ Ultra-low maximum on resistance from
64 mΩ to 190 mΩ at 10 V
■ Low gate charge and gate charge times
on-resistance FOM
■ Wide range of current ratings from
22 to 47 A
■ E Series Super Junction Technology
■ Switch mode applications, including
power factor correction
■ Server and telecom power systems
■ Welding, plasma cutting
■ Battery chargers
■ High-intensity discharge (HID) lighting,
fluorescent ballast lighting
■ Semiconductor capital equipment
■ Solar inverters
■ Induction heating
Benefits
■ Saves energy in high-power, high-performance switch mode applications
■ Reduces on-resistance by 30 % compared to previous-generation devices for
increased efficiency and power density
■ Lower input capacitance
■ Increased switching speeds
■ Withstand high energy pulse in the
avalanche and commutation mode
8
RUTRONIK
SEMICONDUCTORS
SiC Power Module
Cutting edge power modules
SiC is widely expected to be used for the next-generation power devices due to its superior
electrical characteristics, resulting in power devices with lower power loss. SiC devices save
power in a number of ways. ROHM has performed leading R&D on SiC power devices and
modules, and recently began mass production in response to increased market demand.
The BSM120D12P2C005 is a Half-Bridge Inverter integrating SiC-DMOS FET and SiC-SBD.
Features
Applications
■ 1200 V, 120 A
■ Low surge, low loss
■ Low temperature prevents thermal
runaway
■ Industrial equipment
■ EVs and HVs
■ Photovoltaic power generation
and more
Benefits
■ Reducing loss by more than half
■ Original device technology was used to
develop low surge noise power modules
that take advatages ofSiC´s high speed
characteristics. The result is reduced
steady-state loss (on resistance) and less
than half the switching loss compared
with Si devices.
Total Switching Loss Comparison with IGBT (Module)
RUTRONIK
SEMICONDUCTORS
9
50+
TOP
Components
BTS50040-2SFA
High Current PROFET™
First dual-channel high side driver
The BTS50040-2SFA is a dual channel high-side power switch in PG-DSO-36-44 package
providing embedded protective functions including ReverSave™ and Infineon Intelligent
Latch. The power transistors are built by a dual N-channel vertical power MOSFET with
charge pump. ReverSave™ is a protection feature that causes the power transistor to switch
on in case of reverse polarity. Infineon Intelligent Latch ensures a latch switch-off and
reporting in case of fault conditions.
Features
■ 4.0 mΩ typ. => 8.2 mΩ hot (150 °C)
■ Voltage controlled => 3.3 and 5V
compatible logic input
■ Inrush up to 130 A
(min current trip @ 150 °C, per channel)
■ PG-DSO36-44 package is Green robust
(RoHs complaint, qualified to
AEC-Q-100)
Benefits
■ ReverSave™
■ Adjustable slew rate
■ Infineon Intelligent Latching
Protective Functions
■ ReverSave™ (channel switching on
in case of reverse polarity)
■ Inverse load current capability
■ Short circuit protection
(incl. load dump)
■ Over-load protection
■ Thermal shutdown with latch
■ Over-voltage protection
(incl. load dump)
■ Loss of ground protection
■ Loss of Vbb protection (with ext. diode
for charged inductive loads)
■ Electrostatic discharge protection (ESD)
10
Diagnostic Functions
■ Multiplexed proportional load current
sense
■ Separate enable function for each
channel’s current sense signal
■ Open load detection in ON state
■ Fault signal through current sense pin
Applications
■ µC compatible high-side power switch
with diagnostic feedback for 12 V
system grounded loads in automotive
applications
■ All types of resistive, inductive and
capacitive loads
■ Most suitable for loads with high inrush
currents, such as glow plug, PTC
heaters, or lamps
■ Replaces electromechanical relays, fuses
and discrete circuits
Target Availability
■ QS finished in Q1 2012
■ Engineering samples available
RUTRONIK
SEMICONDUCTORS
VIPerPlus / VIPer37
Fixed frequency high performance off
line high voltage converter
The device is an off-line converter with an 800 V rugged power section, a PWM control,
two levels of over-current protection, overvoltage and overload protections, hysteretic
thermal protection, soft-start and safe auto-restart after any fault condition removal.
Burst mode operation and device very low consumption help to meet the standby energy
saving regulations.
Advance frequency jittering reduces EMI filter cost. Brown-out function protects the switch
mode power supply when the rectified input voltage level is below the normal minimum
level specified for the system. The high voltage start-up circuit is embedded in the device.
The VIPer37 is able to address power levels up to 15 W (with VIN = 85-264 VAC) and up
to 30 W (with VIN = 230 VAC ±15 %).
Features
Applications
■ Fly-Back / FF / ISOLATED
■ Default current limit 100 mA
■ Short circuit (Vfb overload) protection
■ Mainly consumer and chargers
■ LED lighting
■ Auxiliary power supply
Highlights
■ Best ruggedness (800 V Vbr MOSFET)
■ Best no-load consumption (<30 mW)
SMPS topology and main applications
High features – Isolated Fly-back
VIPer17
VIPer27
VIPer37
VIPer15
Altair05T-800
Auxiliary PS, STB, DVD, Games console, LCD TV,
major appliances, Motor control, Power Meter,
Chargers, Adapters, PC Stand-by
Quasi Resonant – Isolated Fly-back
Auxiliary PS, STB, DVD, Games console, LCD TV,
major appliances, Motor control, Power Meter,
Chargers, Adapters, PC Stand-by
VIPer25
Altair04-900
Peak Power Isolated Fly-back
DVD, Printer, ATX
VIPer28
VIPer06
coming soon
DIP7
SSO10
1 W…
Quasi Resonant – Isolated Fly-back
VIPer16
VIPer26
DIP7
SO16N
DIP7
SO16N
Auxiliary PS, STB, DVD, Games console, LCD TV,
major appliances, Motor control, Power Meter,
Chargers, Adapters, PC Stand-by
SDIP10
…15W /30W
Basic features – Isolated Fly-back
Auxiliary PS, STB, DVD, Games console, LCD TV,
major appliances, Motor control, Power Meter,
Chargers, Adapters, PC Stand-by
RUTRONIK
SEMICONDUCTORS
11
50+
TOP
Components
MTU1 Series
1 Watt Isolated DC-DC Converters
The new high performance MTU1 series marks a step-change in the miniaturization of
power modules, setting new standards for footprint, load regulation and efficiency.
The series is suited for industrial, test and measurement, process control applications and
all application segments where an isolated surface mount DC-DC is needed.
Features & Benefits
New standard for 1 Watt isolated
■ Reduce the module‘s footprint while
improving electrical performance
characteristics
■ Dimensions are 8.2 x 8.4 x 8.5 mm,
representing a footprint reduction
of 50 % compared to the previous
generation
■ Power density is 1.71 W/cm³
■ Wide temperature performance at full
1 Watt load, between -40 and 85 ºC
■ The series‘ load regulation has been enhanced to only 7.5 %, a change of 40 %.
■ 56 % less power dissipation and lower
running temperatures than its predecessor, improving overall efficiency by more
than a fifth to 89 %
■ Eight models are currently available in
the MTU1 series, featuring a choice of
5 or 12 V input voltage and 5, 9, 12 or
15 V output voltage. The modules each
have a single output, isolated to 1 kVDC.
All are RoHS-compliant.
■
■
■
■
12
Footprint reduced by 50 %
56% less power dissipation
Lower running temperatures
Patent pending
RUTRONIK
SEMICONDUCTORS
R-78C Series
Innoline DC/DC Converter
1.0A SIP3 Single Output
The R-78Cxx-1.0 series switching regulators are ideally suited to replace 1 Amp 78xx linear
regulators and are pin compatible. Efficiencies of up to 96% means that very little energy is
wasted as heat and the high input voltage is a useful feature.
Features & Benefits
Applications
■ New 42V/1A version with up
to 15 W/cm³
■ 1.5, 1.8, 2.5, 3.3, 5, 6.5, 9, 12, 15, 24 V
■ Efficiency up to 97 %, no need for
heatsinks!
■ Pin-out compatible with LM78XX
Linear Regs.
■ Low profile
(LxWxH=11.6x8.5x10.4 mm)
■ Wide input range (5 to 42 V)
■ Short circuit protection, thermal
shutdown
■ Non standard outputs available as
specials
■ Low ripple and noise, non isolated
■
■
■
■
■
■
Industrial controls
Battery-powered-devices
Hand-held equipment
Avionics
Fan controllers
Embedded designs
This versatile switching regulator will find
uses in every branch of electronics.
RUTRONIK
SEMICONDUCTORS
13
50+
TOP
Components
DCPs
Digitally Controlled Potentiometers
Intersil offers the widest selection of low-to-high resolution digital potentiometers in single
dual and quad configurations.
DCPs enable digitally controlled analog
signal processing:
DCPs allow for digital flexibility in an
analog circuit. DCPs provide a link
between the digital and analog domains
in the system, allowing repeatable control
and configuration of analog circuitry. This
approach is typically more power-efficient
than computationally intensive digital
signal processing.
Benefits
■ Not susceptible to mechanical vibration
& higher tolerance to environmental
factors
■ DCPs with EEPROM will store setting
until user changes the value in memory
(~100k to 1M times)
■ Typically smaller than mechanical
potentiometers
■ XDCPs minimize the resistive drifts
due to temperature variations.
Features
■
■
■
■
■
Resolution: 16 to 1024 taps
Memory: non-volatile / volatile
Single, Dual, Quad
Power supply: 1.7 / 2.7 to 5.5 V
Interface: I²C, SPI, Up/Down,
Push Button
■ T-range: -40 to 125 °C
■ Packages: SC-70, SOT-23, TDFN,
TSSOP, SOIC, DIP
14
Applications
■
■
■
■
■
Programmable inverting amplifier
Tunable bandpass filter IGMF model
Trimmable voltage reference
Programmable voltage regulator
Programmable filter and gain block
RUTRONIK
SEMICONDUCTORS
ZSSC3016
Sensor Signal Conditioner
New generation of energy efficient,
high-precision 16-bit SSC
The ZSSC3016 is a sensor signal conditioner (SSC) integrated circuit for high-accuracy
amplification and analog-to-digital conversion of a differential input signal. Designed for
high resolution altimeter module applications, the ZSSC3016 can perform offset, span,
and 1st and 2nd order temperature compensation of the measured signal. Developed for
correction of resistive bridge sensors, it can also provide a corrected temperature output
measured with an internal sensor.
Features:
■ Flexible, programmable analog
front-end design; up to 16-bit scalable,
charge-balancing two-segment
analog-to-digital converter (ADC)
■ Fully programmable gain amplifier
accepting sensors from 14 to 72
(linear factor)
■ Internal auto-compensated
temperature sensor
■ Digital compensation of individual
sensor offset; 1st and 2nd order digital
compensation of sensor gain
■ Digital compensation of 1st and 2nd
order temperature gain and offset drift
■ Intelligent power management unit
■ Layout customized for die-die bonding
with sensor for high-density
chip-on-board assembly
■ Typical sensor elements can achieve
accuracy of less than ±0.10 % FSO @
-40 to 85 °C
Benefits:
■ Integrated 18-bit calibration math DSP
■ Fully corrected signal at digital output
■ Minimize calibration costs through the
one-pass calibration concept
■ No external trimming components
required
■ Highly integrated CMOS design
■ Excellent for low-voltage and low-power
battery applications
Physical Characteristics:
■ Supply voltage range: 1.8 to 3.6 V
■ Current consumption: 1 mA
(operating mode)
■ Sleep State current <250 nA (25 °C)
■ Temperature resolution: <0.003 K/LSB
■ Operation temperature: –40 to +85 °C
■ Small die size: 1.5mm²
■ Delivery options: die for wafer bonding
Applications:
The ZSSC3016 is designed for operation
in calibrated resistive (pressure) sensor
modules:
■ Barometric altitude measurement for
portable navigation
■ Altitude measurement for emergency
call systems
■ Altitude measurement for car navigation
■ Inside hard disk pressure measurement
■ Weather forecast
■ Fan control
RUTRONIK
SEMICONDUCTORS
15
50+
TOP
Components
HIH-6130/6131 Series
Digital Humidity/Temperature Sensors
Honeywell HumidIconTM Digital Humidity/Temperature Sensors: HIH-6130/6131 series,
are digital output-type relative humidity (RH) and temperature sensors combined in the
same package.
Features & Benefits
Applications
■ Wide operating temperature range
of -25 to 85 °C (-13 to 185 °F) allows
for use in many applications
■ Optional one or two %RH level alarm
outputs
■ Provide the user the ability to monitor
whether the RH level has exceeded or
fallen below pre-determined and critical
levels within the application
■ Multi-function ASIC
provides flexibility within the application by lowering or eliminating the
risk and cost of OEM calibration
■ Industry-standard package
provides easy design-in
■ RoHS and WEEE compliant;
halogen-free
■ Two configurations increase flexibility
of use:
- HIH-6130: no filter, non-condensing
- HIH-6131: hydrophobic filter and
condensationresistant allow use in
many condensing environments
Industry
■ Air compressors
■ Weather stations
■ Telecom cabinets
■ HVAC/R
16
Medical
■ Respiratory therapy
■ Incubators/microenvironments
RUTRONIK
SEMICONDUCTORS
TLE5009 Series
360° iGMR based angular Sensors
The TLE5009 is a 360° angle sensor that detects the orientation of a magnetic field by
measuring sine and cosine angle components with Giant Magneto Resistance (GMR)
elements. The differential GMR bridge signals are amplified and can be read out analog
single ended or differential.
Features
Applications
■ Magnetic angle sensor measuring the
direction of a magnetic field
■ Angular range of 0 - 360°
■ Integrated GMR (iGMR) technology
■ Amplified Analog output signals of sine
and cosine bridge
■ On chip temperature compensation of
signal amplitude and offset
■ Sensor status monitoring via extra pin
■ Supply voltage 3.3 or 5.0V
■ -40°C to +150°C automotive qualified
■ PG-DSO-8 Package
Automotive
■ Torque sensing
■ Steering angle
■ Valve control
■ Electronic Power Steering (EPS)
■ Position measuremnt
Benefits
Available Types
■ System costs: Integrated solution has a
clear system cost advantage over discrete
MR bridges and allows quick design ins.
The pre-configuration of TLE5009
saves manufacturing costs (calibration
& programming)
■ Angular performance: TLE5009 achieves highest angular accuracy on system
level in slow and especially fast turning
applications
■ Electrical performance: Best in class
start up time and current consumption
■ Functional Saftey support: FMEDA has
been done, Safety Manual and Safety
Guide are available. Has already been
implemented in ASIL D application
Industrial
■ Steering wheel position sensor
■ BLCD Motor commutation
■ Position measurement
■ Angula measurment
■
TLE5009 E1000
TLE5009 E2000
TLE5009 E1010
TLE5009 E2010
RUTRONIK
SEMICONDUCTORS
Supply / Offset compens.
3.3 V / static
5.5 V / static
3.3 V / over temp.
5.5 V / over temp.
17
50+
TOP
Components
VCNL4010
Proximity & Ambient Light Sensor
The VCNL4010 is a surface mount, fully integrated proximity and ambient light sensor.
It combines an infrared emitter and PIN photodiode for proximity measurement, ambient
light sensor, and signal processing IC in a single package with a 16 bit ADC Power-Saving
Interrupt Function.
Features
Applications
■ Package type: surface mount
■ Dimensions (L x W x H in mm):
3.95 x 3.95 x 0.75
■ Integrated infrared emitter, ambient
light sensor, proximity sensor, and signal
conditioning IC
■ Interrupt function
■ Supply voltage range VDD: 2.5 to 3.6 V
■ Supply voltage range IR anode: 2.5 to 5 V
■ Communication via I2C interface
■ I2C Bus H-level range: 1.7 to 5 V
■ Floor life: 168 h, MSL 3, acc. J-STD-020
■ Low stand by current consumption:
1.5 μA
Proximity sensor for mobile devices (for
touch screen locking, power saving, etc.)
■ Integrated ambient light function for
display/keypad contrast control and
dimming of mobile devices
■ Proximity/optical switch for consumer,
computing and industrial devices and
displays
■ Dimming control for consumer,
computing and industrial
Benefits
The sensor’s 16-bit effective resolution
for proximity detection ensures excellent
cross talk immunity. While other products
only achieve object detection up to 100
mm, the VCNL4010’s programmable LED
drive current from 10 mA to 200 mA
(in 10 mA steps) allows distances up to
200 mm.
18
The device offers excellent ambient light
suppression by modulating the infrared
emitter signal. The VCNL4010’s builtin ambient light photo-pin-diode offers
sensitivity close to that of the human eye,
with a 16-bit dynamic range for ambient
light detection from 0.25 lux to 16 klux.
The sensor offers 100 Hz and 120 Hz
flicker noise rejection.
RUTRONIK
SEMICONDUCTORS
BMA Series
Digital, Triaxial Acceleration Sensors
Bosch Sensortec‘s accelerometers are advanced, ultra-small, triaxial, low-g acceleration
sensors with digital interfaces, aiming for low-power applications.
The sensors allow the measurement of accelerations in 3 perpendicular axes and
thus senses tilt, motion, shock and vibration in cellular phones, handhelds, computer
peripherals, man-machine interfaces, virtual reality features and game controllers.
Interfaces
Benefits
The sensors feature I²C and SPI digital,
serial interfaces. Sensor parameters, like
g-ranges or low-pass filter settings, and
also all interrupt engine settings can be
easily programmed via the digital interfaces.
■
■
■
■
Features
Applications
■ Digital resolution: 6 to 14 bit
■ Resolution (±2g range): 0.244 to 62.5 mg
■ Measurement ranges (programmable):
±1 g, ±1.5 g, ±2 g, ±3 g, ±4 g, ±8 g, ±16 g
■ Sensitivity (±2g range): 16 to 4096 LSB/g
■ Current consumption (full operation):
down to 139 µA
■ Interface: SPI & I2C
■ T-range: -40 to 85 °C
■ Package: 2x2 or 3x3 mm LGA
■ Display profile switching
(portrait/landscape, face-up/face-down
switching)
■ Flat detection
■ Tap / double tap sensing
■ Menu scrolling
■ Advanced power management for
mobile devices
■ Shock and free-fall detection
■ Gaming
■ Step-counting
■ Tilt compensation for electronic
compass
Ultra small packages
Outstanding power efficiency
Maximum integration
Extensive tools and software
■
RUTRONIK
SEMICONDUCTORS
19
50+
TOP
Components
BMC050 – eCompass
6-Axes Electronic Compass
With its eCompass BMC050 Bosch Sensortec will start a new portfolio of high precision
MEMS sensors for compass applications in mobile phones, navigation system and other
portable devices. Two separate sensors are integrated within the 3x3x0.95 mm³ LGA
package: a triaxial magnetometer for geomagnetic field detection and a triaxial accelerometer for tilt compensation. The magnetometer is using the measurement principle
FlipCore patented by Bosch.
Function:
Technical Details:
■ BMC050 measures the earth’s geomagnetic field in three dimensions (3 axes),
the dynamic and static acceleration and
the tilt of the sensor
■ The tilt information is required in situations where the geomagnetic sensor can
not be held flat, i.e. parallel to the earth‘s
surface
■ The accelerometer integrated within
the BMC050 provides all the precision
and functionality of Bosch Sensortec‘s
leading-edge 10bit digital accelerometer
BMA250
■ Digital interfaces: I²C, SPI (3/4wire),
4 interrupt pins
■ Current consumption
regular mode: 540 µA@10 Hz
low power mode: 190 µA@10 Hz
■ Supply voltage: 1.62 to 3.6 V
■ Supply voltage I/O: 1.20 to 3.6 V
■ Operating temperature: -40 to +85 °C
■ Package (LGA type): 3x3x0.95 mm³
Target Applications:
■ Accurate tilt-compensated orientation
information for navigation
(GPS enhancement / map rotation)
■ Location based services (LBS)
■ Augmented reality
■ Indoor navigation (in combination with
a pressure sensor)
■ Modern personal mobile devices
(mobile telephones, tablet PCs,
notebooks, portable media players, etc.)
Acceleration sensor
■ Stand-alone operation: supported
■ Resolution: 10 bit
■ Programmable g-range: +/-2 g, +/-4 g,
+/-8 g, +/-16 g
■ Zero-g offset: +/-80 mg
■ Sensitivity tolerance: +/-4 %
Geometric sensor
■ Measurement range: +/-1000 µT
■ Resolution: 0.3 µT
20
RUTRONIK
SEMICONDUCTORS
HAL38xy Series
Programmable 2D Position Sensors with
Arbitrary Output Function
The HAL38xy is a new sensor family using the Micronas 3D HAL technology.
This new family has several members. HAL385x provides a linear, ratiometric analog output signal with integrated wire-brake detection working with pull-up or pull-down resistor.
HAL387x features a configurable PWM output with up to 12 bit resolution with periodes
between 0.25 kHz and 2 kHz.
Features
Applications
■ 12 bit ratiometric linear output or
PWM
■ 8 kHz sampling frequency
■ Operates from 4.5 V up to 5.5V supply
voltage
■ Operates from -40 °C up to 170 °C
junction temperature
■ Programmable output slope and offset
■ X/Y- and Z-channel gain and offset of
signal path programmable
■ Phase shift between X/Y- and Z-channel
programmable
■ Programmable output clamping for
error band definition
■ Programmable reference position
■ Programmable magnetic range detection
■ On-Board diagnostic of different
function blocks of the sensor
■ Short circuit protected push-pull output
■ Over- and reverse protection
■ Under- and overvoltage detection
■ Wire-break detection with pull-up or
pull-down resistor
■ EMC and ESD robust design
■ Automotive
- Throttle valve position sensor
- Gear selector
- EGR valve position
- Clutch pedal position
- Right height position sensor
- Steering wheel position sensor
■ Industrial
- Steering wheel position sensor
- Motor control
- Rotary position senosr
■ Medical
- Flow meter
- Pedal position sensor
- Rotary position sensor
■ White goods
- Flow meter
- Non contacting potentiometer
Benefits
■ Angular and position measurement
extremely robust against temperature
and stress influence
■ Programmable arbitrary output characteristic with up to 32 setpoints
RUTRONIK
SEMICONDUCTORS
21
50+
TOP
Components
AH1892
Micropower Omnipolar Hall Effect
Switch
The AH1892 is the world’s smallest sensitivity selectable micropower Omnipolar Halleffect switch IC. It is designed for consumer equipments ranging from portable battery
powered cell phones, tablet PCs to home appliances and industrial applications. Based on
chopper stabilized architecture and a ESD rating of 8kV on the supply and output pins,
the AH1892 provides a reliable and robust solution over the whole operating range.
To help achieve the smallest solution, the AH1892 has internal push-pull output structure
and provides a simple sensitivity selection pin with no additional components required.
It is available in the small low profile U-WLB0707-4 (CSP 0.71mm x0.71xmm) and standard small leaded SOT553 packages.
Features & Benefits
Applications
■ Programmable Omnipolar Hall switch
with a push-pull output:
- Two programmable switch points
provides simplicity and flexibility
- Tight tolerance magnetic bands with
a typical of 35 G or 60 G
- No external pull-up required
■ Designed for portable and battery
powered equipment:
- Supply voltage 1.6 V to 3.6 V
- Micropower operation with an average
supply current of 4.3 µA at 1.8 V
■ High performance and reliability:
- Chopper stabilized
- High ESD rating of 8 kV
- Operating temp. range -40 to 85 °C
■ The smallest solution
- Small low profile CSP is only
0.71 x 0.71 mm
- SOT553 miniature leaded package
is also available
■
■
■
■
■
■
■
Camcorders
Handheld game consoles
Home appliances
Contactless switches
Cell phone flip and slide detect
Holster and docking stations detect
Portable and tablet PC
CSP package
GND
A1
OUTPUT
A2
AH1892
BSEL
B1
VDD
B2
C
High Band / Low sensitivity
GND
A1
OUTPUT
A2
AH1892
BSEL
B1
VDD
B2
C
Low Band / High sensitivity
22
RUTRONIK
SEMICONDUCTORS
LSM303DLM
3-Axis Accelerometer & 3-Axis
Magnetometer
The LSM303DLM is a system-in-package featuring a 3D digital linear acceleration sensor
and a 3D digital magnetic sensor.
The various sensing elements are manufactured by using specialized micromachining processes, while the IC interfaces are realized using a CMOS technology that allows the design
of a dedicated circuit which is trimmed to better match the sensing element characteristics.
The LSM303DLM includes an I²C serial bus interface that supports standard mode
(100 kHz) and fast mode (400 kHz). The system can be configured to generate an interrupt
signal by inertial wakeup/free-fall events, as well as by the position of the device itself.
Thresholds and timing of interrupt generators are programmable on the fly by the end user.
Magnetic and accelerometer parts can be enabled or put into power-down mode separately.
The LSM303DLM is available in a plastic land grid array package (LGA), and is guaranteed
to operate over an extended temperature range from -40 to +85 °C.
Features
Applications
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Analog supply voltage: 2.16 to 3.6 V
Digital supply voltage IOs: 1.8 V
Power-down mode
3 magnetic field channels and
3 acceleration channels
±1.3 to ±8.1 Gauss magnetic field
full-scale
±2 g/±4 g/±8 g dynamically selectable
fullscale
High performance g-sensor
I²C serial interface
2 independent programmable interrupt
generators for free-fall and motion
detection
Accelerometer sleep-to-wakeup function
6D orientation detection
ECOPACK®, RoHS, and “Green”
compliant
■
■
■
■
Compensated compass
Map rotation
Position detection
Motion-activated functions
Free-fall detection
Intelligent power-saving for handheld
devices
Display orientation
Gaming and virtual reality input devices
Impact recognition and logging
Vibration monitoring and compensation
RUTRONIK
SEMICONDUCTORS
23
50+
TOP
Components
SLC NAND EN27SN
NAND Flash Family
EON Silicon Solution Inc., the fabless design house based in Taiwan focuses on nonvolatile memories, NOR and Serial flash. As one of the fastest growing flash provider EON
offers high manufacturing and testing standards, excellent quality at an effective price and
production with state-of-the-art technology. Innovative products, such as „Multiple Chip
Package“ complete the product range.
At the beginning of this year EON launched also NAND Type Flash Memories with
densities of 1Gb and voltage supply 2.7 to 3.6V. Samples of the 1Gb NAND with voltage
range 1.7 to 1.95V are available in Q3/2012, mass production is starting in Q4/2012.
In Q1/2013 the 4Gb SLC NAND with voltage supply 1.7 to 1.95V is going into mass
production.
Features
Applications
■ Organization:
- Memory cell array: x 8-bit for 1Gb
- Data register: (2K + 64) x 8bit
■ Automatic program and erase
■ Page read operation
- Page size: (2K + 64) bytes
- Random read: 25 µs (Max.)
- Serial access: 25 ns (Min.)
■ 1bit/memory cell
■ Fast write cycle time
- Page program time: 200 µs
- Block erase time: 1.5 ms
■ Command/address/data multiplexed
I/O port
■ Hardware data protection
- Program/erase lockout during power
transitions
■ Reliable CMOS floating-gate technology
■ Endurance:
- 100K program/erase cycles
(with 1-bit/528 bytes ECC)
- Data Retention: 10 years
■ Command driven operation
■ Cache program operation for
high performance program
■ Copy-back operation
■ Unique ID for copyright protection
■
■
■
■
■
■
24
Industry equipment
TV
Gaming
Musical equipment
Navigation
PC & peripheral
RUTRONIK
SEMICONDUCTORS
FRAM
Non-Volatile Random-Access Memory
FRAM has what it takes to become the non-volatile memory of the future and to supersede
both Flash and E²PROM. With its low power consumption, the technology combines the
benefits of conventional non-volatile memories and rapid static RAM.
Features
Applications
■ Fast writing speed
(Write cycle time 150 ns)
■ Overwriting (no need to erase)
■ Write Cycle=Read Cycle (no delay)
■ High endurance:
up to 1 trillion read/write cycles
■ High tamper resistance:
Data written in FRAM cannot be stolen
by physical analysis
■ Low power consumption
■ Ecology memory operating like SRAMs,
with no requirement for battery back-up
■ High resistance to radiation
■ Up to 4-Mbit density
■ Data retention up to 10 years:
- Support SPI, I²C, parallel interfaces
- Support both 3V and 5V systems
■
■
■
■
■
■
■
■
■
Metering
Test and Measurement
Parameter storage
Motion Control
Point of Sales
ATM
Back-up memory
Real-time data writing
Factory automation
Planning and
and development
development
Serial I 2C
3V
8Mb
5V
MB85R8xxx
Parallel
4Mb
3V
Parallel
I/F
Parallel I/F
MB85R4001/2A
Parallel
1.8V
3V
5V
2Mb
MB85RS2xxx
8–3V)
Serial SPI (1.
(1.8–3V)
MB85R1001/2A
Parallel
1Mb
256Kb
Memory size (kbit)
(kbit)
128Kb
64Kb
16Kb
4Kb
SPI
Serial SPI
MB85R256F
Parallel
MB85RC256V
3–5V)
Serial I 2C ((3–5V)
MB85RS1xxx
8–3V)
Serial SPI (1.
(1.8–3V)
MB85RS256A
Serial SPI
MB85RS256V
Serial SPI
MB85RC128
MB85RC128
Serial I 2C
MB85RS128A
Serial SPI
MB85RC64
Serial I 2C
MB85RS64
Serial SPI
MB85RC64V
Serial I 2C
MB85RC16
MB85RC16
Serial I 2C
MB85RC16V
MB85RC16V
Serial I 2C
MB85RS64V
Serial SPI
MB85RS16
Serial SPI
MB85RS16V
Serial SPI
MB85RC04V
Serial I2C
Line-up of Fujitsu standalone FRAM devices
RUTRONIK
SEMICONDUCTORS
25
50+
TOP
Components
SuperFlash®
NOR Flash Memory
SuperFlash is an innovative, highly reliable and versatile type of NOR Flash memory invented
by Silicon Storage Technology (SST). SuperFlash memory is much more flexible and reliable
than competing non-volatile memories. This technology utilizes a split-gate cell architecture
which uses a robust thick-oxide process that requires fewer mask steps resulting in a lowercost nonvolatile memory solution with excellent data retention and higher reliability
Features Parallel Flash:
Benefits
■
■
■
■
■ Fast, fixed program and erase times
- ~ 40 ms vs. more than a min. for 64 Mb
- Results in improved manufacturing
efficiency and lower costs
■ No pre-programming or verify required
prior to erase
- Results in significantly lower power
consumption
■ Superior reliability
- 100K cycles and 100 years data retention
■ Inherent small sector size
- 4 KB erase sector vs. 64 KB
- Results in faster re-write operations
and contributes to lowering overall
power consumption
Densities from 512 Kb to 64 Mb
Operating voltage: 1.8 V, 3 V and 5 V
HW reset/Boot block/Erase suspend
Security ID and page read/write on 64 Mb
Features Serial Flash
■
■
■
■
■
Densities from 512 Kb through 64 Mb
Voltages available: 1.8 V, 2.5 V and 3.0 V
Single footprint package up to 32 Mb
Full SPI protocol compatibility
Fast AAI programming mode
Features Serial Quad-I/O (SQI™) Flash
SQI Flash memory boosts performance
while maintaining the compact form
factor of standard serial flash memory.
■ 4-bit multiplexed I/O serial protocol
■ Operating frequency up to 80 MHz
■ > 300 Mb/sec sustained Read
■ Operating Voltage: 3.0 V and 1.8 V
■ Density: 16 Mb to 64 Mb
■ Software Parameter & Individual Block
Locking
■ Security ID
26
Microchip is the sole remaining supplier of 8 Mb & 16 Mb Firmware Flash
■ FWH devices (49LF008A and
49LF016C) devices incorporate
Intel’s proprietary FWH interface protocol used in the Intel 8XX Series Hub
Architecture chipsets
■ LPC Flash devices (49LF080A and
49LF160C) comply with the standard
Intel Low Pin Count (LPC) Interface
Specification 1.1
RUTRONIK
SEMICONDUCTORS
S1C17 Series
16-Bit Microcontrollers with
integrated Display Drivers
Epson’s new 16-bit microcontroller features small size and low power consumption
equivalent to an 8-bit microcontroller, even with the 16MB address space.
The S1C17 family of original 16-bit MCUs integrates a wide variety of interfaces, allowing
connection with multiple sensors and a wealth of peripheral circuits such as an EPD driver,
LCD controller and driver supporting low to medium-level resolutions.
The S1C17 family microcontroller has RISC architecture to achieve high-speed operation
and low power consumption, making it ideal for mobile devices. The family includes a rich
lineup of built-in Flash ROM products.
The high quality development environment and on-chip ICE function also contribute to
shorten design turnaround time.
Features
Applications
■ Ultra low power operation
■ Integrated display drivers for segmented
LCD, dot matrix LCD, electronic paper
(e-Paper)
■ Sensor interface for temperature and
humidity sensors
■ Building management
– Alarm systems
– Temperature / humidity control
– Utility meters
■ Healthcare / medical
– Sports watches
– Battery powered handhelds
– Fitness, workout equipment
■ Appliances
– Operator panels
■ Electronic price tags
■ Electronic shelf labels
■ Data loggers
■ Consumer
– Watches
– Telephones
– Home audio
Benefits
■ Space and cost reduction due to
shipment of bare dice possible
■ Cost reduction due to mask programmed devices possible
■ Space and cost optimized by integrated
solutions (MCU and Display Driver)
■ E-Paper driver enables innovative zeropower bistable display technology
RUTRONIK
SEMICONDUCTORS
27
50+
TOP
Components
FM3 Series
32-Bit ARM Cortex-M3 Microcontroller
Fujitsu’s FM3 microcontroller family incorporates the ARM Cortex M3 standard core. It
is a scalable platform, ranging from low pin count, low power microcontrollers (MCUs)
to high performance products with up to 1MB flash memory and a rich set of peripherals,
including USB, CAN and Ethernet.
The MCUs are based on Fujitsu’s highly reliable (100,000 erase/write cycles) and high speed
(0 wait states at 60MHz) embedded flash process. All MCUs are produced in Fujitsu’s own
wafer fabs enabling control over quality, availability and costs.
Features
Benefits
■ High speed operating frequency:
Up to 144MHz CPU clock
■ High speed flash: 0 wait states at 60MHz
■ Wide range of power supply voltages
supported:
- 1.8 to 3.6 V (low power products),
- 1.8 to 5.5 V (ultra low leakage
products) and
- 2.7 to 5.5 V (high performance products)
■ Memory densities up to 1MB flash /
128KB RAM
■ Highly reliable flash memory:
100,000 write/erase cycles,
up to 20 years data retention
■ Flash security function
■ Functional safety because of internal,
trimmed RC oscillator, Clock supervisor, two stage programmable LVD,
CRC hardware module, MPU (Memory
Protection Unit)
■ Connectivity with up to 2 channels
CAN controller, full speed USB host &
function and Ethernet MAC
■ Maximum flexibility while takes full
advantage of an advanced 12-bit ADC,
present in all FM3 devices, enabling
high-speed acquisition, high sensitivity
and low system load.
Applications
■
■
■
■
■
■
■
28
Industrial applications
Motor control
Factory automation
White goods
Power tools
Medical and healthcare
Hand-held devices
RUTRONIK
SEMICONDUCTORS
XMC4500 Series:
MCU ARM® Cortex™ M4 family to get involved in dedicated industrial applications
The first Infineon family member XMC4500 of the new XMC4000 microcontroller platform
based on ARM® Cortex™-M4 is suited for real-time critical control applications to combine
it with all benefits of an industry standard core. It is dedicated to industrial applications in
the field of renewable energy, factory and building automation, transportation, logistics and
medical equipment and energy-efficient solutions. DAVE™ 3 code generation tool leads to
a reduced development cycle times in industrial applications while using highly energyefficient products with industrial interconnection capabilities.
Features
Benefits:
■ ARM® Cortex™-M4, 120 MHz,
incl. single cycle DSP MAC and floating
point unit (FPU)
■ eFlash 1 MB, including hardware ECC
■ RAM 160 kB
■ 12-channel DMA
■ IEEE 1588 compliant Ethernet MAC
■ USB 2.0 full-speed on-the-go
■ Comprehensive set of timers and PWM,
delta-sigma demodulator, position
interface
■ 4x 12-bit ADC, 2x 12-bit DAC
■ 6x Multi-function serial interface modules configurable to SPI, I2C, I2S, UART
■ 3x CAN nodes
■ External bus interface supporting
SDRAM, SRAM, NOR-/NAND-Flash
and memory-mapped IO devices,
e.g. LCD
■ SD/MMC interface
■ Touch interface & LED Matrix
■ Battery-backed realtime clock with calendar function and timebased or external
wake-up capabilities
■ LQFP-144 / LQFP -100
(-40 to +125 °C)
■ LFBGA-144 (-40 to +85 °C)
■ System performance and peripheral set
for highly energy-efficient solutions
■ Reduced time-to-production by efficient
handling the complexity in reduced
time and cost (DAVE™ 3)
■ Scalability, code compatibility across
family members
■ Extended temperature 125 °C.
■ Product availability planned for about
15 years
■ Support based on appropriate tools, SW
partners and the new DAVE™ 3 code
RUTRONIK
SEMICONDUCTORS
29
50+
TOP
Components
MD8710
Single Chip Platform IC
for Analytical Measurement
The analytical measurement platform IC is a data acquisition and processing SoC
(System on Chip), optimized for measurement applications in interconnected environments. It comes with integrated peripherals for GPIO, PWM timers and several serial
interfaces to meet a diversity of application requirements.
Features
Applications:
■ ARM Cortex™ R4 microcontroller
■ Integrated Analog Front-End (AFE)
- 2 independent 16-bit ΣΔ ADC
input channels & 2 independent
16-bit ΣΔ DAC output channels
- Free programmable wavetable
based analog signal converter
- High performance analog data
acquisition / data generation for
high resolution stimulus / measurement
- Multi channel / multi frequency
synthesis and analysis
- Configurable OP amp
- Typical applications:
4 point measurement (e.g. impedance
spectrography) and pulse oximetry
■ Bluetooth connectivity
■ Colour graphic display IF
■ Class D audio output
■ Security IF
■ Power management for battery charging
■ Medical market
- Blood analysis instrumentation
- Bio-analytical measurement devices
- Electrochemical imped. spectroscopy
- ECG, EEG
- Stationary & portable patient monitors
- Multifunctional home health monitors
- Glucose meter, Pulse oximeter,
- Infusion pump
- Heart rate monitors (EEG)
- Next gen. remote prof. health system
■ Chemical analytics
- Corrosion measurement
- Chemical sensors
- PH/Ion meter, etc.
■ Sports activity & healthcare
- Ergo meter, fitness tests, sport activities
- Bicycle monitoring
- On the go sport & wellness monitors
- Electrochemical imped. spectroscopy
- Sports & fitness diagnostic, etc.
■ Environmental measurement
- PH & lux-meter
- Air pollution & monitoring
- Water chemistry & pollution,
monitoring & analysis, water EIS
- Noise absorbing meter, photo,
UV radio meter, etc.
Benefits:
■ System Cost Reduction through
high level of functional Integration
■ Efficient Platform Development through
multifunctional device
■ Reduced Development Risk
30
RUTRONIK
SEMICONDUCTORS
PIC32 Series
32-Bit Micrcocontroller designed
for performance
Microchip‘s 32-bit portfolio with the MIPS® M4K® offers high performance microcontrollers,
and all the tools needed to develop your embedded project.
With free software, low cost development tools, and pin/peripheral compatibility from
16-bit product lines, PIC32 MCUs shorten time to market and allow your designs to grow.
PIC32 gives your application the processing power, memory and peripherals your design
needs.
Features
Benefits
■ More processing capability per MHz,
- MIPS M4K core with best-in-class
1.65 DMIPs/MHz ratings,
or 183 Coremarks™
- Two sets of 32 Core registers, can
perform math operations in parallel
■ 80 MHz Internal Bus and Cache
■ Scalable Connectivity options
- Serial solutions: up to 6 UART,
4 x SPI, 5 x I²C
- Single or dual CAN
- USB – device or host or OTG
- Integrated 10/100 Ethernet
■ Scalable memory options
- 16KB to 512KB program Flash
- High speed RAM sizes from 4KB
to 128KB made for better GUIs,
faster Ethernet, & running multiple
communication stacks
■ Robust ADC maintains
<±1 LSB INL/DNL across -40 to 85 °C
■ 8/16-bit Parallel Master Port
- enables connection of graphics
controllers, memory
- Flexible digital I/O MUX
■ Temperature range: -40 to 105 °C
■
■
■
■
Quick time to market
Free software with source code
Easy to use starter kits
Easy migrate from Microchips
16.bit PIC
■ Application development boards
Applications
■
■
■
■
High impact graphics/user interfaces
Ethernet/USB/CAN connectivity
Multitasking embedded control
High performance audio
RUTRONIK
SEMICONDUCTORS
31
50+
TOP
Components
RX – Renesas eXtreme
32-Bit Flash Microcontroller Series
The extreme evolution to embedded systems led by Renesas‘ new RX MCU family.
Equipped with a new-generation core, the RX family can respond to the ever-increasing
demands and challenges on the MCUs of today and tomorrow. Even higher performance,
greater code efficiency, lower power consumption, and more integration have been achieved,
while providing legacy, enhanced and new peripheral functions for many applications.
Features
Applications
■ RX200, the low power series of the
RX Family. The RX200 product series
combines the high calculation performance of the RX600 and new low power
and safety capabilities. Supports safety
functions for IEC60730.
■ RX610, large (2 MB) on chip memory,
floating point unit, 100 MHz operation
without waitstates, four units of 10-bit
A/D converters (1 μs), 2 channels of
10-bit D/A converter
■ RX62T, for inverter control, floating
point unit, multiple fast ADCs, CAN
■ RX63x, connectivity with USB host,
device and OTG, Ethernet MAC, CAN,
TFT direct drive
■ Industrial
– Human machine interface
– Motor/solar inverters
– Sensors
– Actuators
– Industrial networking
■ Building management
– Alarm systems
– Access control
– Utility meters
■ Medical
– High-end glucose meters
– Power meters
– Battery-operated applications
■ Appliances
– Motor drive
– Application control
■ Consumer
– PC peripherals, gaming
– Digital cameras, GPS platforms
– Home audio
Benefits
■ Upgrade path for existing
H8S/M16C/M32C users
■ From reliable worldwide #1 MCU
supplier
■ Best in class flash technology
(100 MHz w/o waitstates)
■ Superior and innovative peripherals
■ General purpose and ASSPs
■ Large ecosystem
32
RUTRONIK
SEMICONDUCTORS
STM32 F4 Series
High-performance Cortex-M4 MCU
ST is widening its successful Cortex –MCU family with STM32 F4 series. Based on the
Cortex-M4 core, this series opens the door to the digital signal controller (DSC) market.
It allows pin-to-pin and software compatibility versus the STM32 F2 series, with increased
performance, DSP capability, a floating point unit, more SRAM, and peripheral improvements such as full duplex I²S, a RTC less than 1 µA and 2.44 MSPS ADCs expanding the
number of addressable applications in the industrial, consumer and healthcare segments.
The ARM Cortex-M4 core features MAC instructions, optimized SIMD arithmetic and
saturating arithmetic instructions. The adaptive realtime ART AcceleratorTM combined
with ST’s 90 nm technology provides linear performance up to 168 MHz unleashing the
full performance of the core.
Features & Benefits
Applications
■ 32-bit Flash MCU, 168 MHz/210 DMIPS,
- with DSP instructions, floating point unit
■ High performance and ultra fast data
transfers
- with ART Accelerator
- 7-layer AHB bus matrix
with 7 masters and 8 slaves
- Multi DMA controllers: 2 general
purpose, e.G. USB HS and Ethernet
- One SRAM block dedicated to the core
■ Outstanding power efficiency
- RTC <1 μA typ in VBAT mode
- 3.6 V down to 1.7 V VDD
- Voltage regulator with power
scaling capability
■ Up to 1 Mbyte of on-chip Flash memory
192 Kbytes of SRAM
■ Peripherals for connectivity and others:
- All required common interfaces:
camera, crypto hash HW processor,
Ethernet, USB, Audio, 2x 12-bit DACs,
3x 12-bit ADC
- Packages : WLCSP (< 4.5 x 4.5 mm),
LQFP64, LQFP176 and UFBGA17
■
■
■
■
■
■
■
■
■
■
Points of sale/inventory
Building management
Industrial automation
Solar panels
Security, fire, HVAC
Test & Measurement
Transportation
Consumer
Medical
Communication
Tools
Extensive tools & software solutions:
■ STM32F4-Discovery-Kit
■ STM32F4-EVAL-Board
■ STM32F4-Starterkits from IAR and Keil
■ Various IDE, starter kits, libraries, RTOS
and stacks, either open source or provided by ST or 3rd parties, including the
ARM CMSIS DSP library optimized for
Cortex-M4 instructions
RUTRONIK
SEMICONDUCTORS
33
50+
TOP
Components
EL357N-G Optocoupler
Packaged in a 4-Pin SMD Package
The Everlight EL357N-G series offers a small SMD optocoupler package with a low package
height of maximum 2 mm for optical isolation solutions with limit board space, making it
ideal for applications where overvoltage protection is needed. It is also fully RoHS compliant, Pb-free and free of halogens.
Features
Applications
■ Lowest package height of max. 2 mm
■ 3750 V isolation voltage between input
and output
■ Vceo 80V
■ Operating temperature -55 to 110 °C
■ Contains an infrared emitting diode,
optically coupled to a phototransistor
detector
■
■
■
■
DC-DC converters
Programmable controllers
Telecommunication equipments
Signal transmission between circuits
of different potentials and impedance
Benefits
■ Wide variety of CTR rankings available
■ Halogens-free
■ All relevant safety approvals
(UL, VDE, SEMKO, NEMKO, DEMKO,
FIMKO, CSA)
■ Pb free
34
RUTRONIK
SEMICONDUCTORS
IR OSLON® SFH4715S
Smallest Infrared LED in the 1-Watt Class
The IR OSLON® SFH4715S of OSRAM Opto Semiconductors is today’s smallest infrared
LED with more than one Watt optical power. The device measures only 3.75 x 3.75 mm²
and therefore facilitates very compact illumination units for CMOS und CCD cameras.
OSRAM’s nanostack chip technology and a temperature stable OSLON® Black Series
package paved the way for the record-breaking high performance device.
Features
Applications
■ 1070 mW optical power at 1 A operating
current
■ Typical thermal resistance of only
6.5 K/W
■ Lens with emission angle of +/-45°
■ Wavelength of 850 nm
■ Forward voltage: typ. 3 V, max. 3.4 V
■ Active chip area: 1 mm²
■ Surveillance systems, CCTV
■ Machine vision systems
■ Traffic: number plate recognition,
toll systems
■ Biometrics for access control and
identification
■ Night vision systems
■ Touch screens
Benefits
■ 15 % more output power than
components without lens
■ Operating lifetime of 50,000 hours
■ It affords extremely small illumination
units for cameras and security systems
■ Automotive qualified
■ Suitable wavelength for CMOS/CCD
camera solutions
■ Superior corrosion robustness
RUTRONIK
SEMICONDUCTORS
35
50+
TOP
Components
DURIS® E & DURIS® P
Perfectly homogeneous and highly efficient
The DURIS® E and P from OSRAM Opto Semiconductors are the new low and mid-power
LEDs – ideal for efficient and homogeneous lighting applications.
The combination of a small/medium lumen package, a wide beam angle and a compact
footprint is perfect for uniform light distribution.
DURIS® E
DURIS® P
■ Footprint of
- 3.0 mm x 1.4 mm (DURIS® E 3)
- 5.6 mm x 3.0 mm (DURIS® E 5)
■ Compact light source in cost-effective
PLCC package
■ Stable brightness over lifetime
■ High efficacy of
- typ. 110 Im/W @ 5000 K (DURIS® E 3)
- typ. 110 Im/W @ 5000 K (DURIS® E 5)
■ Footprint of 2.6 mm x 2.2 mm
■ Long lifetime also at high temperatures
and high currents
(L70/B50 > 50,000 h at Tj = 125°C and
If = 200 mA)
■ High efficacy of up to 110 Im/W @ 3000 K
■ Superior corrosion resistance for
high-quality lighting solutions
■ High maximum forward current of
200 mA
Applications of all types
■ The efficient DURIS® E and P can
be used in a variety of applications:
■ Homes
■ Shops
■ Offices
■ Industries, e.g., white goods
■ Hospitality
■ Signage, e.g., channel letters
36
RUTRONIK
SEMICONDUCTORS
OSLON® SSL & OSLON® Square
Small in size, big on performance
The OSLON® SSL and OSLON® Square measure just 3 x 3 mm but in terms of luminous
efficacy the LEDs are among the leaders. The OSLON® SSL offer beam angles optimized for
use with lenses and reflectors. This revolutionary feature, combined with a broad range of
color temperatures and color rendering indexes, opens up new possibilities for cost-effective
and efficient lighting solutions. With a maximum driving current of 1.5 A and an impressive
efficacy, OSLON® Square opens up new opportunities in indoor and outdoor lighting.
OSLON® SSL
OSLON® Square
■ The first power LED with sophisticated
beam angles (80°/150°).
■ Ultra-compact footprint for high density
arrays saving space and simplifying color
mixing (just 3 x 3 mm).
■ Neutral to warm white, capable of high
power up to 0.8 A, cool white and all
colors up to 1 A
■ Compact and symmetrical, allowing
dense clustering for high flux packages
■ Thermal resistance of RthJS (typ.) 7 K/W
■ Lifetime of more than 50,000 hours,
depending on application conditions
■ Different versions (LCW.CC, LCW.EC,
LCW.PC, LUW) for various application
requirements
■ Broad color portfolio: red, green, blue,
and other colors
■ Light recycling by reflective layer of the
package, using every single lumen
■ Ultra-compact footprint for
high-density arrays to save space
and simplify circuit designs
(only 3 mm x 3 mm)
■ Full color temperature range
■ Suitable for driving currents
up to 1.5 A
■ Highly reflective package
■ Thermal resistance of
RthJS (typ.) 3.8 K/W
■ Lifetime of more than 50,000 hours,
depending on application conditions
■ Different product versions adjusted
to fit the specific application
requirements
Applications
Interior lighting
(Home, office, shop & hospitality)
■ Retrofits & fixtures
(e. g. flourescent replacem.)
■ Spotlights & Task lights
■ Shelf lighting & Downlights
Architecture &
entertainment
■ Color changing fixtures
■ Entertainment
■ Stage and studio lighting
RUTRONIK
SEMICONDUCTORS
Outdoor lighting
■ Street
■ Tunnels
■ Parking lots
■ Pedestrian areas
37
50+
TOP
Components
LED 2323
SPMWHT221MD5
The 2323 series from Samsung LED is a high efficient SMD LED at 123 lm/W in cool white
colour range. With its longlasting lifetime the 2323 package from SamsungLED is LM80
certified. The small size of 2.3 x 2.3 mm and the high lumen output with a low drive current
makes this product suitable in many lighting applications: office lighting, retrofit lighting
(LED tubes and several bulbs) and advertising lighting applications.
Features
Applications
■
■
■
■
■
■
■
■
■
Small form factor: 2.3 x 2.3 x 0.7 mm
High efficacy
SamsungLED chips are used
Low thermal resistance
General lighting
Advertising boards
Emergency exit lighting
Accent lighting
Ambient lighting
Benefits
■ High reliability at high current level
■ LM 80 data certified
■ High brightness at low power
consumption
■ Excellent lumen & colour maintenance
■ Tight binning for Midpower LED
■ Very competitive prices
38
RUTRONIK
SEMICONDUCTORS
Ceramic 3535
High Power LED
The 3535 ceramic SMD LED from Samsung LED is an extremely efficient SMD Power-LED
with a luminosity of up to 140 lumen @350 mA and a good colour maintenance. The ceramic package provides effective heat dissipation and low thermal resistance. The application
areas are broad ranging from outdoor lighting applications to indoor lighting like downand spotlights.
Features
Applications
■ High performance and high brightness
■ Dimensions: 3.5 x 3.5 x 1 mm
■ Superior heat dissipation
(heat resistance: 6.1 °/W)
■ Ceramic package
■ Long lifetime
■ Stable light output over temperature
■ General lighting
(downlights, retrofit lamps, LED bulbs)
■ Outdoor lighting
(street, tunnel, flood lighting)
■ Flashlights
■ Refrigerator lighting
(home & commercial)
■ Automotive interior lighting
(map lamp, trunk)
Benefits
■
■
■
■
High lumen/ watt ratio
Good lumen & colour maintenance
Binning within the ANSI/DOE standard
Very competitive prices
Serie
■ SPHWHTL3D2
■ SPHWHTL3D3
RUTRONIK
SEMICONDUCTORS
39
50+
TOP
Components
MLCC
Minimizing Risk of short Circuit
Minimizing the risk of short circuit caused by a mechanical crack is getting a more
and more important requirement for MLCC. We offer different solutions for higher
bending strength as well as for higher reliability to protect sensitive applications in
harsh environments.
Features
Applications
■ Soft Termination (Flexiterm®, Flexicap®,
Polymer Termination)
- significant higher bending strength,
typically 5 mm
■ MLCC with leadframe
- single chip and several chips stacked
are available
- min. twice the capacitance is
obtainable on single cap space
- unique construction provides
high reliability
- leadframe absorbs thermal and
mechanical stress
■ Special inner electrode designs in
comparison to standard design
- all available with soft termination
■ Automotive
- ABS control unit
- Airbag
- Auto cruise
- Clamp 30
- Electric parking brake
- Electrical power steering
- Engine sensors
- ESC control unit
- Fuel tank sensors
- Lighting
- Park distance control
- Power brake unit
- Seat belt sensors
- Washer/wiper
■ Industrial
- Automation
- DC/DC converters
- Large scaled PCBs
- Power supply
■ Harsh environmental applications
with thermal and mechanical stress
Manufacturers & Series
■ AVX:
- Flexiterm® / Flexisafe® (Float Mode)
- RH series with leadframes
■ Murata:
- Soft Termination- GCJ serie
- KRM / KR3 series with leadframe
(commercial)
- KCM / KC3 series with leadframe
(automotive)
■ Samsung:
- Soft Termination / Open Mode Design
■ Vishay:
- Polymer Termination /
Open Mode & Float Mode Design
40
RUTRONIK
PASSIVE
COMPONENTS
MLCC
with Ultra High Capacitance
Ultra high capacitance MLCCs are high end products. The cap range is expanding year
by year and follows the trend in electronic industry towards convergence, multifunction
and miniaturization. This is related to the highest invests in development like increasing
the dielectric constancy and the number of layers as well as decreasing the layer thickness.
We provide a regularly updated excellent overview of our manufacturers‘ possible CV
ranges.
Features
Applications
■ Operating temperature up to 125 °C
■ Ultra low ESR guarantees excellent
characteristic for high frequency
switching power supplies
■ Very low impedance for low ripple noise
■ Highest ripple current with lowest self
heating
■ Up to 220 µF replacing Aluminium,
Tantalum and also Polymer capacitors
- price stability
- lower ESR
- higher reliability
- no polarity
■ Energy
- Metering
- Solar inverter
■ Home appliance
- Air condition
- Smoke detector
- White goods
■ Industrial
- Brushless DC motor
- Sensors & controls
■ Lighting
- RGB ambient lighting
- Street lighting
■ Automotive & Medical
- For these applications please
pay attention to use only
recommended parts,
e.g. AECQ-200 qualified
Manufacturers & Series:
■ Generally commercial grade
standard series
■ Typical ceramic X5R, X6S, X7S, X7R
■ Samsung:
up to 220 µF @ 6.3V / 100 µF @ 10V
■ Murata: up to 100 µF @ 10V
■ Yageo: up to 100 µF @ 6.3V
■ AVX: up to 100 µF @ 6.3V
RUTRONIK
PASSIVE
COMPONENTS
41
50+
TOP
Components
DC-Link Film Capacitors
Film Capacitors satisfy a large variety of electronic applications, because the dielectrics
have excellent electrical characteristics, high stability and long life time. Due to increasing
electrical requirements film capacitors are more and more an alternative solution to electrolytic capacitors for DC-Link applications. These Film Capacitors are manufactured with
a low loss polypropylene dielectric.
Features
Applications
■ High current carrying capability at high
frequencies
■ High reliability due to excellent
self-healing properties
■ Long Lifetime >= 100.000 h
■ Low ESR
■ High rated Voltage up to 6000 Vdc
■ High Surge Voltage of max. 2.0 x Ur
■ End of Life (-2 % Capacitance maximum)
■ 2- and 4-leads version
■ Screw connectors
■ Specific Designs on request
■ Industry
- Induction heating
- Lamps
- Motor drives
- Power converter
- Power generation
- Uninterruptable power supplies (UPS)
- Welders
■ Medical
- External defibrillators
- Laser
- X-ray machines
■ Traction Technology
- Electric vehicle
- Fork lift
- Hybrid car
Manufacturers & Series
■ Kemet:
C4AE / C4DE series
■ Vishay:
MKP 1848 / MKP1849 series
■ Wima:
DC-Link MKP4 /MKP5 /
MKP6 / HC series
42
RUTRONIK
PASSIVE
COMPONENTS
High Performance
Tantalum Capacitors
The electronic industry has to meet the sophisticated requirements of customers. The
applications are becoming more and more powerful, smaller and of higher quality. To meet
the changing requirements of applications’ needs, the technical parameters of tantalum
capacitors have to be improved constantly. Our manufactures are focusing on the technology trends towards higher capacities in lower case sizes, reduced ESR values, and reduced
derated voltages at high temperatures.
Features
Applications
■
■
■
■
■ Automotive
- Diesel ignition control
- Engine control
- Fuel injection systems
- Steer-by-wire
- Transmission control
■ Industrial
- electric gasoline pump
- fire detectors
- industrial mother board
■ Oil exploration
■ Power Supply
- amplifiers
- battery chargers
- battery management system
- converters
■ Sensor applications
- Temperature control
- Tire pressure monitoring
■ Telecommunication
- base station power amplifier
Improved reliability – 2x standard
DCL reduced by 25% to 0.0075 CV
175°C @ 0.5VR continuous operation
Robust against higher thermo-mechanical stresses during assembly process
■ Capacity range: 0.10 – 470 μF
■ Voltage range: 6.3 - 50 V
■ AEC-Q200 qualified
Benefits
■
■
■
■
■
Real time performance
Outstanding power efficiency
Superior and innovative peripherals
Maximum integration
Extensive tools and software
Manufacturers & Series
■ AVX: TRJ / THJ series
■ Vishay: TP3 / TH3 series
RUTRONIK
PASSIVE
COMPONENTS
43
50+
TOP
Components
High Reliability Electrolytic
Capacitors
The development into higher lifetime, higher ripple current, higher capacitance and lower
ESR is ongoing for several years. Our worldwide known suppliers developed based on
the market requirement for all types besides Axial into those directions to increase the
performance of the Electrolytic Capacitor and in the end of the application.
Features
Manufacturers & Series
■ Radial
- High lifetime up to 6,000 h @ 125 °C
- High temperature range up to 150 °C
- High rated voltage up to 500 V
- LowESR down to 35 mOhm
(+20 °C / 100 kHz)
- High ripple current up to 2,370 mA @
105 °C, 100 kHz
- Low profile down to 20mm
■ SMD
- High lifetime up to 3,000 h @ 125 °C
- High temperature range up to 125 °C
- High rated voltage up to 100 V
- LowESR down to 80 mOhm
(+20 °C / 100 kHz)
- High ripple current up to
2,640 mA @ 105 °C, 100 kHz
■ SnapIn
- High lifetime up to 7,000 h @ 105 °C
- High temperature range up to 105 °C
- High rated voltage up to 500 V
- High ripple current up to
5,490 mA @ 105 °C, 120 Hz
■ Radial
- Rubycon: BXC, BXF, LLE, ZLJ, ZLK,
RX30 series
- Panasonic: FR series
■ SMD
- Rubycon: TLV, THV, TXV series
- Panasonic: FC, FK, FP, ZA series
- Vishay:
146 CTI series
■ SnapIn
- Rubycon: VXH, VXG, VXR series
44
Applications
■ Automotive
– Fan
– Fuel pump
– Gear shift control
■ DC-Link
■ Inverter
■ Lighting
– Lamp ballast
– LED solutions
■ Power conditioner
■ Power supply
RUTRONIK
PASSIVE
COMPONENTS
EDLC
Electric Double Layer Capacitors
Electric Double Layer Capacitors provide Backup and Peak Power either as a battery
replacement or in combination with a battery. The big advantage of this technology is the
very quick charge and discharge ability in combination with the high charge and discharge
currents and the number of cycles they withstand.
Features
Applications
■ Very quick charge and discharge
ability (energy storage after short
charging period)
■ High charge and discharge currents
■ No internal chemical reaction like batteries (no memory effect, very long life)
■ Nearly no charge and discharge cycle
limitation
■ No charging control circuit needed
■ No overcharging possible
■ Maintenance free (cost saving)
■ Serial and parallel connection possible
■ Operating temperature range from
–40 up to 85 °C (depending on the series)
■ Capacity range from 0,015 up to 3000 F
■ Battery Back up
- Network & Server
- PC
■ Emergency applications
- Door actuators
- Lights
- Smoke detector
■ GPRS / GSM applications
■ Heavy lifting
■ Large Diesel Engine starting
- Forklift
- Train
■ Metering
■ Solar battery operated circuits
- Lamps
- Parking Lot
- Toys
Manufacturers & Series
■ Coins
- Panasonic: SD, SG, NF, F, RF, RG series
- NEC-Tokin: FC, FS, FY, FT, FR, FM,
FG series
■ Radial / Screw / Weldable / Modules
- Maxwell: K2, MC, D-cells, Modules
RUTRONIK
PASSIVE
COMPONENTS
45
50+
TOP
Components
Assembled Thermistors
Customized Solutions for various
Temperature Measurement Applications
A thermistor (SMD or THT) can be specified and assembled according to the customer’s
requirement for temperature sensing, measurement, detection and monitoring.
Customized solutions are for instance:
Applications
■ an epoxy coating
■ the use of metal pipes or screwing
connections
■ the dimension of the connecting cables
■ Automotive
- HVAC
- Battery management
- Motor control
■ Home appliance
- Heater e.g. floor heater
- Refridgerator
- Washing machine
■ Industry
- Industrial freezer
- Welding machine
Benefits
■ Bridge long distances from PCB to
measuring point
■ Defend the device from humidity, air,
dust or damaging
■ Reduction of procedures (logistics,
purchasing, subcontracting, etc.)
■ Reduction of material risks
46
RUTRONIK
PASSIVE
COMPONENTS
Transient Suppression
Products
Multilayer Varistors - Protecting sensitive
circuitry against ESD pulses
A zinc oxide varistor is a voltage dependent resistor with symmetrical voltage-current
characteristics that is designed to protect all kinds of electronic devices.
The Multilayer Varistors (MLV) are leadless chip devices. The robust construction makes
them ideally suitable to endure the thermal stresses encountered in the soldering,
assembling or manufacturing steps.
Features
Applications
■ Excellent solderability – electroplated
termination
■ Sub 1 ns response time
■ Low leakage current
■ No derating up to 125 / 150 °C
■ Small dimensions
■ TVS diode & EMC capacitor can be
replaced by one component
■ Automotive
- Body electronics
- Comfort & convenience
- Drive train
- Safety
- Underhood
■ Energy
- Smart GRID
- Smart meter
- Solar / wind inverter
■ Home appliance
- Backlit display
- Portable electronics
- White goods
■ Industrial
- Automation
- Industrial controller
- Motor control
■ Lighting
- LED driver
- Power LED
■ Medical
- Hand held equipment
- Hearing aid
Benefits
■ Repetitive ESD and high current strike
capability without performance
degradation
■ Automotive qualified (AEC-Q200)
■ Off state EMI filter, on state transient
protection
■ Bipolar protection
■ High peak current and transient
energy capability
■ Stock deal with more than 60 values
(chip sizes from 0402 to 1206;
VDC voltage 3.3 to 48 V)
RUTRONIK
PASSIVE
COMPONENTS
47
50+
TOP
Components
SMD Thin Film Resistors
Thin film resistors are typically used for applications that require high stability, high accuracy or low noise. They are able to achieve very low tolerances and temperature coefficients.
Furthermore, thin film resistors have the advantage of low parasitic inductance and low
capacitance.
As a result, thin film resistors are stable at much higher frequencies and are significantly
more stable over their lifetime compared to thick film resistors.
Features
Applications
■
■
■
■
■
■
■
■ Automotive
- Audio
- Body control module
- HVAC
- Keyless entry system
■ Consumer
- GPS
- Mobile phone
- PDA
■ Industrial
- Automatic equipment controller
- Converters
- Measurement equipment
- Radio frequency
■ Medical
- Medical equipment
- Measuremet instruments
High heat resistant
Typical drift below 0.05% after 1000 h
Pulse stability
High reliability
Moisture resistant
T.C.R. down to ± 5 ppm/K
Resistance tolerance down to ± 0.1 %
48
RUTRONIK
PASSIVE
COMPONENTS
Shunt / Current Sensing
Resistors
A current sensing resistor has a low ohmic resistance which is optimized to monitor the
current through a circuit. The calculation is based on the voltage drop across the shunt.
This allows an accurate and convenient current measurement according to the Ohm’s law.
Features
Applications
■ Resistance range from 0.2 mΩ to 1 Ω
■ Measurement with low tolerances
■ Wide temperature range from
-65 to 275 °C
■ Power rating up to 10 W
■ Practically unaffected by temperature
fluctuations
■ Standard devices, but also customized
solutions available
■ Low thermal EMF
■ Excellent frequency behaviour
■ Automotive
- Anti-lock brakes
- Climate control
- Engine control
■ Consumer
- Gaming systems
- Home electronics
- White goods
■ Industrial
- Bar code scanners
- Power supplies
- Power tools
■ Medical
- Defibrillators
- Monitoring systems
RUTRONIK
PASSIVE
COMPONENTS
49
50+
TOP
Components
Inductors – MLT & WWT
The Magnetic Components
An inductor is a passive electrical component that stores energy in its magnetic field.
Our focus is on multilayer-technology (MLT) and wire-wound-technology (WWT) from
our manufacturers Murata (located in Japan) and Samsung Electro-Mechanics (located in
South Korea).
Both manufacturers are well-known global players and provide worldwide support.
As broadline distributor Rutronik offers a wide stock program.
Features
Applications
■ For general purpose, RF circuits
■ A wide variety of filter
■ Noise suppression & EMI suppression
filters
■ Oscillator, resonator, resonance circuits
■ Impedance matching
■ Buck, booster, buck booster
■ Automotive
- CAN control unit
- DC motor load drive
- Hands free car kit
- Telematics box
■ Energy
- Metering
- PV junction box
- Solar inverter
■ Home appliance
- Access control
- Air condition
- Coffee machine
- Smoke detector
- Washing machine
■ Industrial
- Brushless DC motor control
- Sensors & controls
■ Lighting
- RGB ambient lighting
■ Medical
- Blood glucose monitor
- Patient monitoring
- Pulse oximetry
- Composition analyser
Manufacturers & Series
■ Murata
- Multi Layer Chip Beads LQG, LQP
- Multi Layer Chip Inductors BLA,
BLM, LQM
- Wire Wound Chip Inductors LQW
- Wire Wound Power Chip
Inductors LQH
- Power Solutions two num. digits
- Multi Layer Chip EMI-Filter NF
(e.g. LC combined, capacitive)
■ Samsung Electro-Mechanics (SEMCO)
- Multi Layer Chip Beads CIM, CIC
- Multi Layer Chip Inductors CIH, CIL
- Multi Layer Power Inductors CIG
50
RUTRONIK
PASSIVE
COMPONENTS
Timing Devices
all you need
Most applications need an exact time base or clock signal – that goes without saying. For all
requirements we recommend the most suitable and economical solution, covering the 100 %
product portfolio for below mentioned applications and standards. We support the Research
& Development with sample service and carrying a wide stock program throughout our manufacturers. Our TOP manufacturers provide worldwide support from Japanese and Asian
production facilities.
Features
Applications
■
■
■
■
■
■
■
■
■ Automotive
- Control units & Chassis control
- Hands free car kit
- Safety & keyless entry / go
■ Energy
- Metering
- Solar inverter
■ Home appliance
- Air condition
- Smoke detector
- White goods
- Remote controls
■ Industrial
- Automation
- Sensors & controls
- BT / NF-Communication
■ Medical
- Blood glucose meter
- Pulse oximetry
- Health care
100 % product portfolio
Reduction of supplier base
All inhouse technologies with the leaders
Highest production capacities
AECQ200, TS16949, ISO14001
Board evaluation
Reference design support
Robust package solutions for harsh
environment
■ Operating temperature up to 150 °C
Timing devices include
■ Buzzer
■ Ceramic filter
■ Crystal unit
- low frequency 32.768 kHz
- AT-cut High Frequency – MHz range
■ Crystal Oscillator
- Clocks
- Programmable
- TXCO, VCXO, Oven
■ Resonator (SMD / THT)
■ Real time clock
all Bus Systems (Parallel / Serial)
■ Low jitter SAW
RUTRONIK
PASSIVE
COMPONENTS
51
50+
TOP
Components
Micro Connectors
Molex Core Micro Products of board-to-board, FFC/FPC, microminiature wire-to-board
and memory card connectors offer long-term availability and support across a wide variety
of industries.
Features & Benefits
Series
■ BtB-solutions pitch
0.4/0.5/0.635/0.8 and 1.0 mm in stacking
heights from 0.8 to 20 mm in SMT
■ FFC-connectors pitch
0.20/0.25/0.30/0.50 and 1.0 mm in SMT
in heights from 0.62 mm up to 5.9 mm
■ Cts up to 96
■ MicroSD- and SD-headers for
standard-cards
■ WtB-solutions from 1.0 mm up to
2.54 mm pitch in SMT and THT
■ UL, CSA and TUV approved
■
■
■
■
■
■
■
■
SlimStack™
FFC/FPC
MicroSD- and SD-connectors
PicoClasp™
Pico EZ-mate™
PicoBlade™
ClikMate™
C-Grid™
Applications
■ Medical
- Handheld Patient Metering
- Wireless Telemetry Devices
- Audio Hearing Instruments
- Medical Imaging Equipment
- Homepatient Monitoring
■ Industrial
- Utility Meters
- Industrial PC’s
- GPS Mapping Devices
- Handheld Industrial Tools
- Automation Controls
- Instrumentation Panels
- Testing Equipment
- Robotic Equipment
- HVAC Controls
■ Automotive & Transportation
■ Lighting
■ Safety Equipment
■ Data/Telecom
■ Consumer
52
RUTRONIKCOMPONENTS
ELECTROMECHANICAL
Power Connectors
Wide selection of power connectors range up to 150 A and more, each kind of connection
wire to wire, wire to board and board to board configuration is possible. These connectors
can be modified, customized or adapted to meet virtually any application requirement.
Features & Benefits
Applications
■ WtW, WtB and BtB solutions available
■ Current Density up to
705 A/in² (109 A/cm²)
■ Standard current rating from
5 A to 150 A per circuit
■ Power and signal in combination
■ Panel mount or free hanging plugs
■ Terminal Position Assurance (TPA) for
wire-to-wire
■ UL, CSA and TUV approved
■ Blind Mate (BMI) possible
■ Waterproof available
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Series
■
■
■
■
■
Micro-Fit 3.0™
Mini-Fit®
Sabre™
Mini-Fit Sr™
EXTreme Power™
Automotive / E-mobility
Security
Alarms
Vending
Gaming
White goods
Low-end computer
High-end computer
Industrial
Business machines
Storage
Data
Computer peripherals
Electrical energy & power
Environmental & production equipment
Broadcast equipment
Telecom infrastructure
RUTRONIKCOMPONENTS
ELECTROMECHANICAL
53
50+
TOP
Components
1.25 mm Wire-To-Board
System
FCI’s 1.25 mm pitch wire-to-board connector series is designed for a wide variety of
applications in industrial, automotive and consumer. The range consists of terminals,
crimp housings and PCB headers in straight and right angle, surface mount and though
mount configurations. It is a single row design, available with from 2 to 15 circuits.
A crimping application tool is also available for wire harness assembly.
Features & Benefits
Applications
■ Operating temperature: -40°C to +105°C
■ Plating options: gold flash or tin
■ Circuits: #2-#15 positions available,
extension up to 20 positions
■ Polarized Mating Geometry: crimping
housing is polarized to prevent
mismating with PCB header
■ Friction lock: crimping housing is
equipped with friction locks to secure
force with PCB header
■ PCB header material (rasin) meets
halogen free requirement
■ Housing meets EU Industry Safety
standard
■ RoHS compliance and UL approved
■ Contact Resistance:
20mΩ (maximum)
■ Insulation Resistance:
100MΩ (minimum)
■ Voltage Rating:
125 Volts AC,DC
■ Current Rating: 1 Amp
■ Dielectric Withstand Voltage:
500 VAC/minute
■
■
■
■
■
■
■
54
Office equipment
Industry control
Instrumentation/metering
Vending Pos machine
Small motor/ robot control
Security
Car audio and alarm systems
Markets
■ Industrial
■ Consumer
RUTRONIKCOMPONENTS
ELECTROMECHANICAL
PwrBlade+™
Next Generation of AC/DC Power
Distribution Connector System
The PwrBlade+™ connector is a next generation AC/DC power distribution connector
system for demanding applications requiring higher linear current density and low power
loss. It is capable of 192 A/linear inch with eight adjacent high power contacts energized
simultaneously and ≤ 0.7 mΩ power contact resistance after environmental exposure.
Features & Benefits
Applications
■ Builds on PwrBlade™’s proven technology using an enhanced power
contact design to achieve increased
linear current density
■ Includes a high power contact
(up to 75 A/contact; 30ºC T-rise;
no airflow)
■ Includes a lower power contact
(up to 49 A/contact; 30ºC T-rise; no
airflow) for applications with multiple
voltages and lower power requirements
■ For next generation 1U and 2U
pluggable power supplies
■ Provides power contacts for power
distribution and signal contact for
power control
■ Rugged, molded-in guides enable blind
mating
■ AC/DC pluggable power supplies in
data, telecom & datacom/networking
equipment
■ Industrial PCs
■ Industrial controls & instrumentation
■ Medical
RUTRONIKCOMPONENTS
ELECTROMECHANICAL
55
50+
TOP
Components
MVL Power S3 Connectors
Wide selection of power connectors range up to 150 A and more, each kind of connection
wire to wire, wire to board and board to board configuration is possible. These connectors
can be modified, customized or adapted to meet virtually any application requirement.
Features & Benefits
Applications
■ High current carrying capacity:
230 A at 70 °C with 50mm2 wire section
■ High voltage 400-750V
■ Easy handling
■ Reduced mating forces
■ 2-step disconnection feature for
safe unmating
■ Peripheral shielding
■ Dual sealing feature when mated:
- External: IPx9K, IP67,
1000m mbars under air pressure
- Internal: Individual cavity sealing with
single wire seal IP2x B electrical shock
protection
■ Automotive / E-mobility
■ High voltage DC Connections for:
- Batteries
- Junction boxes
- Inverters
- Power electronic boxes
- Air conditioning
- Heating systems
- others
56
RUTRONIKCOMPONENTS
ELECTROMECHANICAL
IDC Contact for
WTB Applications
IDC stands for Insulation Displacement Connector. The IDC contact pierces the insulation
of the wire and makes direct contact with the strands inside the wire. When a wire termination is made, the wire is pushed down into the IDC contact slot and this makes a fresh
metal contact joint which is gas tight and prevents gases and moisture from entering the
joint, this giving high reliability and low resistance.
Features & Benefits
System Applications
■ Accepts solid and stranded wires
AWG 14-28
■ No wire preparation – eliminates
soldering or crimping of wires
■ True “Gas Tight” connection for
harsh environments
■ Voltage up to 600 V,
current up to 15 A
■ Tested to automotive levels of
temperature, shock and vibration
■ Passed 1000 hours at 125 °C for
high temperature applications
■ Operating temperature from
-40 °C to 125 °C
■ Connectors have optional caps that act
as assembly tool and enhanced strain
relief
■ Connecting discrete wired
components to the PCB
■ Bringing power, ground or signals
onto a PCB
■ Daisy chaining PCB´s together to
create a continuous string of boards
Product Applications
■ Industrial sensors, vehicles, gas,
pressure, retail security
■ Portable electronics, warehouse
terminals, scanners
■ Smart meters
■ Building electronics security cameras,
fire/smoke detectors
■ SSL lighting, industrial, commercial
and automotive
■ Medical, portable, patient monitoring
■ Electronic devices, power converters,
circuit breakers
RUTRONIKCOMPONENTS
ELECTROMECHANICAL
57
50+
TOP
Components
IEC Power Connectors
Flexible Power Supply for Mobile Devices
Our manufacturers’ portfolio of connectors according to IEC 60320 covers a wide variety
offering a flexible power supply for mobile devices. The component range, also available
with additional features, furthermore covers power cords as well as a large selection of test,
DC, DIN, data and signal plugs and jacks.
Features & Benefits
■
■
■
■
■
■
■
■
■
■
■
■
IEC power in- and outlet
Male / female power cord plug
2.5A, 10A, 16A
Panel or PCB mount
Screw, quick connect terminals, solder
70°, 120° 155°
2-pole and 3-pole
Screw, cross or side flange, fixed snap in
or variable snap in
Power cord plug: left, central, right
With filtering
Stock program
Combinations with fuse, switch and filter
Applications
This construction allows the replacement
of the power cord, the disconnection
of the device or the delivery of similar
device connecting cables for connector
systems in different countries.
58
RUTRONIKCOMPONENTS
ELECTROMECHANICAL
Wire-to-Board Connectors
MPE-Garry is offering a complete range of wire to board connectors for crimp- IDC- or
solder termination. Available are various pitches from 1 mm up to 4.2 mm. This range of
products is able to handle currents from 0.5 A up to 9 A over a temperature range from
-40 °C up to +105 °C. The mating board connectors are available for through hole, pin in
paste or SMD-termination. All MPE-Garry wire to board connectors are fully compatible
with the most common industries standard products. Besides these parts MPE-Garry is
able to make complete wire harnesses at very competitive pricing.
Features
Applications
■ Available in pin counts from
2 to 100-way
■ Single and double row versions
■ Polarisation feature
■ Friction- or positive-locking features
■ Fully isolated contacts
■ Contacts available for AWG 16 to
AWG 32 wires
■ Wire-to-Wire versions availablel
■
■
■
■
■
■
Industrial electronics
Cellular phones
Household equipment
Vending machines
Consumer electronics
Computers
Benefits
■ Competitive priced
■ Fully compatible with industries
standards
■ Feasible pack sizes
■ Complete wire harnesses
■ Customer specific modifications
RUTRONIKCOMPONENTS
ELECTROMECHANICAL
59
50+
TOP
Components
Pin & Female Headers
Machined and stamped contact types
Our manufacturers’ portfolio of Pin & Female headers is based on a wide range of different
pitches, contact types and includes any possible custom design. The manufacturer offers 3D
models for easy design-in activity and services sample, medium and large series quantities
based on more than competitive price level.
Features
■ Pitches: 5.08 / 2.54 / 2.00 / 1.27 mm
■ Technologies:
THT / SMD / Press-Fit / Pin & Paste
■ Contact Types: machined and stamped
■ Versions: straight and right angled
■ Pin Count: up to 80 pins
■ Loading according to customer request
■ Special types: e.g. Dual-body-headers
Applications
These kinds of Board-to-Board connectors allows the connection of two and
more PCBs based on solder wave or
reflow processes using various contact
pitches on an application driven cost level. Easy to design-in and usable in every
electronic device.
Benefits
■ Competitive priced
■ Fully compatible with industries
standards
■ Feasible pack sizes
■ Complete wire harnesses
■ Customer specific modifications
60
RUTRONIKCOMPONENTS
ELECTROMECHANICAL
KSC Series
Sealed Tact Switch for SMT
The high reliability switches meet IP67 approvals and are available in J or G terminations
with silver or gold platings. C&K’s highly automated manufacturing process has resulted in
a significant increase in the operational life of the tact switches. The switches now perform
up to 1,000,000 cycles, the equivalent of 274 operations every day for ten years.
Measuring 6.2 x 6.2 x 2.5mm, different actuator types, normally open contacts and a range
of five actuation forces. Especially for industrial applications due to sealing and gold plating,
heavy duty applications can be reached.
KSC-ST Series
Features & Benefits
feature a range of sound levels from high
(>50dBa) to low (<30dBa) sound intensity
levels. It is also a sound tunable switch
which is ideal for a variety of automotive
applications including steering wheels,
HVAC, dashboards, door, seat and sunroof
modules, as well as industrial control
panels and medical and consumer applications.
■
■
■
■
■
KSC7 Series
feature a positive tactile feel in a range of
six actuation forces. Current rating for the
momentary action, SPST, normally open
devices ranges from 1 to 50 mA for silver
plating and 1 to 10 mA for the gold plating.
Contact resistance is less than 100mΩ.
Maximum power rating for the silver and
gold plating is 1VA and 0.2VA, respectively, with a maximum voltage of 32VDC.
Operating temperature ranges from -40°C
to +125°C, depending on plating.
Positive tactile feeling
Range of 6 actuation forces
J or G terminations
Tape & reel
IP 67
Applications
■
■
■
■
Automotive
Cellular phones
Industrial electronics
Network infrastructure and IT
RUTRONIKCOMPONENTS
ELECTROMECHANICAL
61
50+
TOP
Components
G3VM-61VY
Solid State Relays
MOSFETs that set the benchmark for Solid State Relays. Manufacturing using latest
advances in automated production and include a variety of improved construction
technologies within the areas of LED, PDA and FET chips.
Features & Benefits
■
■
■
■
■
■
4 Pin
Special purpose
Function 1a
SMT
Load voltage 60 V
High dielectric strength between I/O
3,750 VAC
■ Trigger LED forward current of 2 mA
(maximum facilitates power saving and
prolonged battery life)
■ Continuous load current 70 mA
■ Tape and reel packaging possible
Applications
■
■
■
■
■
■
■
Broadband systems
Security systems
Industrial systems
Battery powered equipment
Measurement devices
Amusement machines
Telecommunication solutions
62
RUTRONIKCOMPONENTS
ELECTROMECHANICAL
1206L
Lead-Free Surface Mount Resettable PPTC
The 1206L Series PTC provides surface mount overcurrent protection for applications
where space is at a premium and resettable protection is desired.
Features
Benefits
■ Operating/Storage temperature:
-40 to +85 °C
■ Max. Device Surface temp: 125 °C
■ Passive aging:
+85 °C, 1000 hours
-/+5 % typical resistance change
■ Humidity Aging
+85 °C, 85 %, R.H.,1000 hours
-/+5 % typical resistance change
■ Thermal Shock
MIL–STD–202, Method 107G
+85 /-40 °C 20 times
-30 % typical resistance change
■ Solvent Resistance
MIL–STD–202, Method 215, No change
■ Vibration
MIL–STD–883C, Method 2007.1,
Condition A
No change
■ Moisture Sensivity Level:
Level 2, J–STD–020C
■
■
■
■
■
■
RoHS compliant, lead- and halogen-free
Fast response to fault currents
Compact design saves board space
Low resistance
Low-profile
Compatible with high temperature
solders
Applications
■
■
■
■
■
■
■
■
USB peripherals
Disk drives
CD-ROMs
Plug and play protections for motherboards and peripherals
Mobile phones - battery and board
protection
PDAs
Digital cameras
Game consoles
RUTRONIKCOMPONENTS
ELECTROMECHANICAL
63
50+
TOP
Components
HDD
for Industrial Applications
The hard disk drive, often referred to as HDD, is most commonly known as the storage
device in PCs and other computer systems. However, Toshiba was the first manufacturer to
recognize that HDDs could also be built in many other applications such as personal video
recorders, portable media players and navigation systems. But not only consumer products
benefit from HDDs.
From standard industrial PCs to machine
and robot controlling, from KIOSK solutions and point of sale systems to large
format digital signage display standards,
traditional PC technology is moving into
more sophisticated applications known as
industrial.
The implementation of HDDs in industrial applications is increasing rapidly
as HDD technology enables unparallel
flexibility and opens new dimensions in
service and production management.
The operating environments of industrial
applications differ from standard computing devices, therefore, careful selection
of the right HDD solution is vital in avoiding fundamental maladjustment often
resulting in premature system failures.
Todays industrial environments are diverse in nature but still share several characteristics and critical requirements.
Features
Silverstone
Hockenheim
■ Capacity
80 GB
100 GB
■ Interface
PATA
SATA
-20 to 70 °C
-15 to 70 °C (24x7)
-30 to 85 °C
-15 to 85 °C (24x7)
End 2015
End 2015
■ Temperature Range
■ Product life
Benefits
■ Fixed BoM
■ Long time availability
Applications
■ Industrial and embedded PC
■ Medical application
64
RUTRONIK
STORAGE
TECHNOLOGIES
D3003-S
Industrial Mainboard
Motherboards for Industrial Applications
Industrial PCs perform in a multitude of environments. The requirements these PCs have
to meet are as varied as their areas of application. They control robots and CNC machines,
are used in the automotive industry, work banking or gaming machines, or control digital
signage. All of these have one thing in common: any type of commercial usage requires
highest availability and reliability.
They operate around the clock, 7 days a week, with temperatures between 0 and 50 °C,
resist shock and vibration, endure interfering fields or function in combination with
devices suspicious to interference.
Features:
Benefits
■ Form Factor
Mini ITX
■ CPU
AMD Single-Core T44R (1.2 Ghz/9 W)/
AMD Dual-Core T56N (1.6 Ghz/18 W)
■ Chipset
AMD A55E Controller Hub
■ Memory
2x SO-DIMM DDR3 1333MHz max, 8 GB
■ LVDS
Dual channel 24-bit (on S1 & S3 version)
■ Display Port
up to 2560 x 1600 (on S2-version)
■ Small footprint 170 x 170 mm
■ Single 19-24 VDC power supply
■ Low power consumption
Applications
■ Medical
■ Digital signage application
■ HMI
STORAGE
TECHNOLOGIES
RUTRONIK
65
50+
TOP
Components
Optical Drive
Cutting Evaluation Costs thanks
to Long Life
TEAC’s new professional DV-W5000 is the world’s most efficient and accurate CD/DVD
recorder and verifier for qualified applications. It offers hundred per cent quality control
for all discs. Originally designed for PC use, DV-W5000 has some special functions added
to fulfil requirements in industrial use.
Equipped with TEAC’s typical very long product lifecycle a stable and reliable platform is
assured.
Features
Benefits
DV-W5000E
■ SATA and PATA Interface
■ High accuracy of try open position
■ Very quick verify mode
■ Fast tray operation
■ Support new discs by adjusting new
write strategies
■ Error report by bliniking LED
■ Total Power-on-Hour, CD/DVD write/
read accumulate time
■ Fixed Bom
■ Long time availability
■ Static and dynamic wear leveling
66
Applications
■ Industrial and embedded PC
■ Medical application
■ Automotive
RUTRONIK
STORAGE
TECHNOLOGIES
CFAST CARD
The next CompactFlash generation
The CFAST CARD combines the CompactFlash card form factor with a Serial ATA interface. With this merging of two industry standards, the CFast card sepcification was created
to replace existing hard drives and CompactFlash in applications requiring small form
factors, long life endurance and the ability to withstand shock, vibration, extreme temperatures (-40 to +85 °C), high altitude and other aggressive environments.
Swissbit CFast is designed to provide
rugged storage for embedded and industrial systems. In these markets, performance,
data and system reliability, system downtime, power fail robustness and flexibility
are important design considerations.
The CFast Card operates with 3.3 Volt low
power source and supports three SATA power management states: Active, Partial and
Slumber. This standard is a perfect choice
for both, boot devices and removeable
applications, where low to medium storage
densities (up to 64 GB) are required and
the physical size of conventional or solid
state hard drives are impractical.
Certainly the CFast cards comes with
full engineering and customizing support
and life time monitoring features, like
S.M.A.R.T. with intelligent flash managing
algorithms and error correction, the latest
F-200 Series will continue to provide the
same reliability parameters using 32nm
Flash instead of 4Xnm technology while
offering competitive pricing and SLC memory densities.
Features
■
■
■
■
Capacity:
4 GB to 32 GB
Temperature: up -40 to 85 °C
Flash type: SLC
Performance: Burst rate up to 300MB/s
Read seq. up to 105MB/s
Write seq. up to 90MB/s
■ Tools:
Windows freeware
application, API/DLL
for extended S.M.A.R.T.
option
Benefits
■ Fixed Bom
■ Long time availability
■ Static and dynamic wear leveling
Applications
■ Industrial and embedded PC
■ Medical application
STORAGE
TECHNOLOGIES
RUTRONIK
67
50+
TOP
Components
PN-L702
Professional Monitor incl. Touch
Developed specially for Sharp touchscreen LCD monitors, Sharp Pen Software allows
anyone to smoothly and easily operate the 70-inch PN-L702B (176.6 cm)/ 60-inch L602B
(152.5 cm). Once documents or images created on any application software have been
captured as JPEG images and displayed on the touchscreen, users can quickly write and
draw directly on the screen surface using the touch pen or a finger. Screen images can be
enlarged or rotated, and handwritten notations such as text and drawings can be selected
and moved around. What’s more, everything on the screen can be saved or exported for
printout, making it easy to keep accurate records of brainstorming sessions and meetings.
Features
Applications
■ Full HD
■ Incl. touch
■ Power Consumption → 240W
■ Industrial
■ Building and security
■ Medical
Benefits
■ The PN-L702B´s integration of a
high-quality LCD panel and a highly
sensitive touchscreen makes for easy
communication.
■ The PN-L702B/L602B also supports
dual-touch* function, which lets the
user scroll a page with two fingers and
enlarge then shrink an image by simply
spreading two fingers apart and then
bringing them together.
■ The PN-L702B/L602B was designed
with user friendliness in mind. For easy
access, the power ON/OFF button is
located on the lower front of the monitor, and the input/output terminals
are vertically aligned on one side of the
monitor.
In all cases as a replacement for
a beamer or a flipchart.
*) When used with computers running Windows® 7
68
RUTRONIK
DISPLAYS
& BOARDS
HE910 Family
Different Variants for all Needs
The HE910 modules are small, lightweight, low power consumption and RoHS compliant devices which combine the access to digital communication services in GSM, GPRS,
EDGE, UMTS and HSPA networks with Land-Grid-Array (LGA) form factor. The different
variants allow customers to select specific features such as data only, data and voice,
data/GPS, voice/GPS, or data/voice/GPS.
Benefits
Additional, the module provides ubiquitous 2G coverage with quad band GPRS
and EDGE class 33 as well as Rx diversity
options, making it the most full-featured
wireless module of any similarly-sized
product on the market today.
■
■
■
■
■
Features
Applications
■ Supported bands
- 4 Bands GSM / GPRS / EDGE:
850 / 900 / 1800 / 1900 MHz
- 5 Bands UMTS / HSPA: 800/850, 900,
AWS1700, 1900, 2100 MHz
■ HSPA+ data up to 21.0 Mbps downlink /
5.76 Mbps uplink
■ Quad Band GPRS and EDGE class 33
■ Small dimensions 28.2 x 28.2 x 2.2 mm
■ Optional GPS
■ Rx Diversity
■ Extended temperature range
■ SIM Access Profile
■ 3GPP release 7 compliant
■ Control via AT commands according to
3GPP TS27.005, 27.007 and customized
Telit AT commands
■ Serial port multiplexer 3GPP TS27.010
■ SIM application Tool Kits 3GPP TS
51.014
■ Built in UDP/TCP/FTP/SMTP stack
■ Consumer
- Mobile computing devices PDAs
- Smartphones
- Table PCs
■ Industrial
- Metering
- Fleet management
- Tracking and AVL
- Telemetry
- Telemedicine
- Security
Worldwide coverage
Scalability
Low power consumption
Extremely low profile
Advanced connectivity features
WIRELESS
RUTRONIK
TECHNOLOGIES
69
50+
TOP
Components
IT600 Multi-GNSS module
Complete GNSS receiver module with
extreme performance
Fastrax IT600 offers the best satellite availability as it is a true multi GNSS receiver that
supports simultaneously or separately GPS and Glonass and with software upgrade Galileo
and Compass once they are operational. In addition to GNSS systems it also supports QZSS
and all different SBAS systems. In order to increase position accuracy even more the IT600
has advanced support for dead reckoning including 1-axis analog gyro, 3-axis digital gyro,
odometer and DWP (Differential wheel pulse) from the vehicles CAN bus. Faster time
to first fix is achieved not only by the multi GNSS support, but also by different APGS
possibilities, either internally generated 5 days ephemeris or server generated AGPS requiring only 2kByte of data transmission.
The IT600 also offers an SDK with huge amount of processing capability for the users own
application, which can save cost significantly if smaller or no additional processor is required. It also offers versatile interfaces including 2 UART’s, 1 UART/USB, I2C, 1PPS and CAN
bus for DR.
Features:
Benefits
■ Multi GNSS support
(GPS/Galileo and Glonass)
■ DR support
(Odometer/Gyro or CAN DWP)
■ Small form factor
16.2 mm x 18.8 mm x 2.3mm
■ Low power consumption: 150 mW
■ Ultra High Sensitivity
162 dBm (Tracking)
■ Cold start sensitivity -146 dBm
■ I2C for MEMS sensors and other
I2C peripherals
■ Three serial ports
■ 1 PPS output
■ SPI and GPIO available for custom
purposes
■ AGPS & PGPS support
■ JTAG for SDK and debugging
■ Anti-Jamming detection and removal
■ Full GNSS support for best satellite
coverage
■ Dead Reckoning when satellite
visibility is blocked
■ Excellent acquisition and
navigation sensitivity
■ Optimal accuracy
70
Applications
■
■
■
■
■
■
High-end fleet management systems
Asset tracking
Infotainment systems
High-end navigators
Stolen car recovery
Timing applications
RUTRONIK
WIRELESS
TECHNOLOGIES
DISPLAYS
& BOARDS
IT530
Miniature OEM GPS receiver with
lowest power consumption
Fastrax IT530 GPS receiver module sets the new benchmark for GPS receivers. Extremely
low power consumption during navigation helps to prolong the battery life significantly.
It also offers market-leading sensitivity of -165dBm, which enables navigation under
toughest environments.
IT530 is suitable for any device, where the GPS receiver should be almost invisible.
Thanks to the small size and minimal power drain, developers find it easy to use without
compromising the functionality of the device itself.
Advanced power saving features enable full operation under varying conditions with as
little as 3mW power consumption. Furthermore, self-assisted GPS allows a very fast time
to fix, with 3-days predicted satellite data.
Features & Benefits
Applications:
■ Extremely tiny form factor
9.6 x 9.6 x 1.85 mm
■ Ultra Low Power consumption:
35 mW @ 3.3 V
■ Low power modes with AlwaysLocate™
■ Only 3 mW average power (typ.)
■ Superior Sensitivity
–148 dBm (Cold Start Acquisition)
–165 dBm (Navigation)
■ Up to 10 Hz Navigation rate
■ Host port UART, NMEA protocol
■ Secondary UART for RTCM
■ DGPS support with RTCM & SBAS
■ WAAS/EGNOS/MSAS/GAGAN/QZSS
■ Self-Assisted for 3 days by EASY™
■ Server Assisted for 7/14 days by EPO™
■ Jammer Remover AIC
■ Embedded logger LOCUS
■ 1PPS output
■ Direct supply connectivity
to Lithium Battery
■ Footprint compatible with IT430
■
■
■
■
■
■
■
Vehicle tracking
Asset tracking
Portable computers
Cameras
Sports devices
Motor sports applications
Battery-operated consumer
devices
■ Stolen car recovery
■ Timing applications
WIRELESS
RUTRONIK
TECHNOLOGIES
71
50+
TOP
Components
RS9110-N-11-22
802.11BGN Wireless Device Server
The RS9110-N-11-22 module from Redpine‘s Connect-io-n™ family of products is a complete IEEE 802.11bgn based wireless device server that directly provides a wireless interface
to any equipment with a serial or SPI interface for data transfer.
Features
Applications
■ Compliant to 802.11b/g and single
stream 802.11n
■ Self-contained serial-to-wireless functionality - does not require any host
processor bandwidth
■ WPA/WPA2-PSK, WEP, TKIP modes
of security
■ Host interface: UART and SPI, selectable
through a hardware pin
■ Integrated TCP/IP stack, with option to
bypass in SPI mode through software
configuration
■ Integrated antenna, frequency reference,
and low-frequency clock
■ Ultra low power operation with power
save modes
■ Ad-hoc and infrastructure modes for
maximum deployment flexibility
■ Single supply 3.1 to 3.6 V operation
■ Certification: Module is based on
RS9110-N11-02 which is certified by
FCC, IC and CE.
■ Seamless Wi-Fi connectivity for any
equipment with a serial or SPI interface
■ Industrial M2M communications
■ Point of sale terminals
■ Metering
■ Security cameras & surveillance
equipment
■ Warehousing
■ Digital picture frames
■ Logistics & freight management
■ Several medical applications
including patient monitoring,
remote diagnostics
72
RUTRONIK
WIRELESS
TECHNOLOGIES
DISPLAYS
& BOARDS
RS-WC-201
Advanced Wi-Fi for M2M Applications
The RS-WC-201 WiSeConnectTM module is a fully integrated 802.11 b/g/n module with
advanced features for M2M, industrial, medical, enterprise and IOT (Internet of Things)
applications. Powered with Wi-Fi DirectTM, it can directly communicate with smartphones and tablet PCs without an Access Point based infrastructure.
Features
Applications
■ 802.11b/g and single stream 802.11n
■ Wi-Fi DirectTM with support for both
Access Point and Client modes
■ Integrated TCP/IP stack, HTTP Server,
DHCP server
■ Configuration through AT commands
for UART interface and SPI commands
for SPI interface
■ Integrated antenna and option for
external antenna
■ Ultra low power operation with power
save modes
■ Single supply 3.1 to 3.6 V operation
■ Consumer
Wi-Fi Connectivity for home appliances
■ Enterprise
Wireless Printer, Security cameras,
Point of Sale terminal
■ Industrial
M2M communication, industrial
monitoring and control, data logging
and streaming
■ Medical
Patient monitoring, medical instrumentation with secure wireless connectivity
WIRELESS
RUTRONIK
TECHNOLOGIES
73
50+
TOP
Components
nRF8001
Single Chip Bluetooth Low Energy
Solution
The nRF8001 is a highly integrated single-chip Bluetooth® low energy Connectivity IC.
It integrates a fully compliant Bluetooth v4.0 low energy Radio, Link Layer, and Host stack
and features a simple serial interface that supports a wide range of external application
microcontrollers.
The nRF8001 is a fully qualified Bluetooth v4.0 low energy design and combines the Radio,
Link Layer, and Host into a single EPL (End Product Listing) enabling designers to easily
create new Bluetooth end products without additional listing fees.
Features
■ Full qualified Bluetooth v4.0 low energy
Connectivity IC with integrated Radio,
Link Layer, and Host stack
■ Cost-optimized solution for Peripheral
role operation
■ Best-in-class power consumption enabling months to years of battery lifetime
when running from standard CR2032
coin cells
■ Fully integrated, low tolerance 32kHz
RC oscillator eliminating the need for
external 32kHz crystals
Applications
■
■
■
■
■
■
Sport and fitness sensors
Health care sensors
Proximity
Watches
Personal User Interface Devices (PUID)
Remote controls
74
RUTRONIK
WIRELESS
TECHNOLOGIES
DISPLAYS
& BOARDS
M24LR16E / M24LR64
Dual Interface EEPROM
ST’s innovative family of Dual Interface EEPROMs provides new features and capabilities.
The EEPROM memory bank can be accessed by any Microcontroller either by a low
power I²C interface or by any wireless ISO 15693 compatible Device RF interface operating
at 13.56 MHz. It also features an energy harvesting and RF status function. In addition, the
family features a 32-bit password protection mechanism.
Thanks to the ISO 15694 Standardization,
STMicroelectronics’ M24LRxxDual Interface EEPROMs are able to communicate
with new NFC compatible smart phones
or any industrial RFID reader. The energy
harvesting function utilizes the RF energy
from the RFID Reader typically to supply a
low power Microcontroller based application connected to a M24LR16E during
communication, without the need of any
further power supply.
Features
■ Industry standard interfaces:
- I2C: 400 kHz, from 1.8 to 5.5 V
- SO 15693: 53 Kbit/s data rate, up to
1 m remote access range
■ 16-Kbit & 64-Kbit EEPROM user Memory
■ 64-bit unique identifier
■ 32-bit password protection
■ 13.56 MHz carrier frequency
■ RF status output
- Energy harvesting output
- RF status digital output
Two worlds connected
The ability to program or read a memory
using either an RF or a wired interface
enables designers to imagine and develop
new functions and capabilities for their
products. It is a good fit for a wide range
of applications.
Benefits
■ Most flexible solution for parameter
updates
■ Passive RFID technology: no on-board
Power required to access the device in
RF mode
■ High reliability EEPROM
■ Flexible password protection scheme
■ Simple & cost-effective implementation
■ Enables new functions and capabilities for: parameter updates, firmware
updates, device calibration, product activation, traceability information management, asset tracking, identification
Applications
■ Industrial
PLC, inverters, power meters, printers,
scanners & industrial networking
■ Building and security
Alarm systems, access control & HVAC
■ Medical
High-end glucose meters, power meters
& battery-operated applications
■ Appliances
Motor drive & application control
■ Consumer
PC peripherals and gaming,
digital cameras & home audio,
GPS platforms
WIRELESS
RUTRONIK
TECHNOLOGIES
75
50+
TOP
Components
Central control with
worldwide service on site
For many customers, the production sites in Asia as well as South and Central America
are becoming more and more important. Here, in addition to the current business model,
there are two other business models.
The first is the outsourcing of manufacturing capacities to the production
sites and the second is the service of
the disproportionately expanding local
markets based on European technology
and design expertise.
In this case, the end products of our
customers are manufactured at the
production sites and sold there also.
The benefits are obvious:
■ Customer service from local contacts
■ Local logistics service
■ Direct support from Rutronik
headquarters
■ Complete access to the Rutronik
product portfolio
■ Delivery exclusively in accordance
with European quality standards
Our core competences
76
CONSULT worldwide
COMPONENTS worldwide
■ Technical Consulting
■ Commercial Consulting
■ Logistical Consulting
■ Semiconductors
■ Passive Components
■ Electromechanical
Components
■ Displays & Boards
■ Storage Technologies
■ Wireless Technologies
■ Lighting Solutions
■ Photovoltaic Solutions
RUTRONIK
Organisational structure – central structures with global alignment
Worldwide services only function
if there is a standardised worldwide
organisational structure in place.
Rutronik is the only distributor which
offers centrally controlled worldwide
services – irrespective of the local,
regional or continental structures of
our customers. The building blocks
for this are:
■ Central customer service
■ Central IT structures for standardised
control of all processes worldwide
■ Worldwide supply with one central
umbrella organisation
■ Standardised delivery and payment
conditions
■ Price structures applicable worldwide
LOGISTICS worldwide
SUPPORT worldwide
■
■
■
■
■
■
■ Online Services
■ Seminars, Workshops
and TechDays
■ Product Change Notifications
■ Quality Management
Supply Chain Solutions
Logistic Modules
Logistic Fulfilment
Value Added Services
Procurement
Consulting
RUTRONIK
77
50+
TOP
Components
Semiconductors
Passive Components
Electromechanical Components
Displays & Boards
Storage Technologies
Wireless Technologies
Lighting Solutions
AKN | Godycka | M08 | INT
Specifications subject to change without notice.
RUTRONIK Elektronische Bauelemente GmbH
Industriestraße 2 | 75228 Ispringen | Deutschland
Tel. +49 7231 801 - 0 | Fax +49 7231 82282
e-mail: rutronik@rutronik.com | www.rutronik.com