OFFICE OF TI{E PRINCIPAL,INDUSTRIAL TRAINING INSTITUTE,
NEAR KENDRIYA VIDYALAYA,BHAWANIPATNA, DIST:-KALAHANDI (ODISHA) PIN-766001'
Phone No. 06670-230494(Ofilqe) Email: itibhawanipatna@gmail.com
N"..l.hS5nrBpr
Sealed Quotations
Dated
AS:.\.-o-'
are invited lrom reputed
tR
Manufacturers/Authorized
Dealers/Distributors/ Suppliers/Govt.Organizations/DGS&D Rate contract holders having valid
VAT/TiN/PAN Registration for supply and installation of Tools, Equipments, and Machineries
of reputed make to LT.I.,Bhawanipatna, Near Kendriya Vidyalaya AtlP.O-Bhawanipatna,
Dist,-Kalahandi, PIN-766001, Odisha under the Directorate of Technical Education & Training,
Odisha, Cuttack..
of Quotation documents containing the details of items (Schedule wise) with
specification, tentative quantity, terms and conditions will be available Kalahandi district website.
A complete
set
The documents can be downloaded from the website'hww.kalahatrdi.nic.in"./Ouotation and can be
submitted along with the EMD in the shape of Bank draft drawn in favour of the Principal, ITI,
Bhawanipatna" payable at Bhawanipatna, State Bank of India in a sealed packets by speed
post/registered post
or can be dropped in the Tender box placed at
superscribing "Quotation
same
will
for T.&.E., ScheduleNo'
be opened at 11.30
A.M on
"
LT.l.,Bhawanipatna,
latest by 15.11.13 up to 3,00PM. The
15.11.13. The Authority reserves the right to accept/ rejegt any
pafi or all Bids/Quotations without assigning any reason thereof.
Kq
roB
l.The
SUPPLY pF rOOLS/EOUIBMENTSIMACHINERIES
Principal, ITI, Bhawanipatna invites sealed Quotation lbr supply and installation oftools,
& machineries for I.T.l.,Bhawanipatna.
equipments
2. Interested eligible Bidders can obtain fufiher information and also inspect the Quotation documents
at the Offrce of the Principal, I.T.I.,Bhawanipatna
3. The Bidders are required to indicate the page no. and signature in each page with seal on each
the documents of the Quotation.
of
Further they are required to submit the list of items with
technical specifications, make, model, brand etc. supported with technical literature/leaflets'
4.
Bidder may quote for any one or more than one Schednle (also all Schedules) Schedule-wise. They
should submit separate Quotation for each Schedule
in
separate sealed cover super-scribing the
followings:
i) Quotation for T &.E of ScheduleNo...........
ii) Due date and time for submission olthe Quotation......
iii) Due date and time for opening of the Quotation.........
iv) Name of the firm with detailed address
5. The Quotation shall be accompanied by the Earnest Money Deposit (EMD) @1% of total bid
amount "in shape of Bank Draft fron.r SBI drawn in favour of the Principal, Industrial Training Institute,
Bhawanipatna payable at Bhawanipatna, lailing which the bid shall be summarily rejected .Quotation
with part-EMD is also liable for rejection. The bid security shall be returned to unsuccessful bidders
on finalization of order. In the event of failure to execute the supply order or violation of terms and
conditions by the successful bidder, the E M D for the Schedr"rle shall be forfeited.
6. Conditional Quotation shall be out rightly rejected.
7. The Quotations should be submitted in the office of the Principal, I.T.I.,Bhawanipatna
office hours qn all Workinq davs upto 3.00PM on 15.11.2013 by speed
be dropped in the sealed box available in the office
same
will
presence
of
dui4g
post/registered post or can
the Principal, l.T.l.,Bhawanipatna and the
be opened on dt.15.11.2013 at 4.00PM in the Office of the Principal I.T.I.,Bhawaniaptna, in
of the Bidders or their authorized
representatives who ever may be present .Quotation
received after due date anil time shall not be entertained and the authority shall not be held responsible
for delay or missing ofthe Quotation during postal transit. If the office happens to be closed on the date
of receipt and opening of this Quotation specified, the Quotation will be received & opened on the
next working day at the same time and venue.
lType textl
8.
(l) The Price quoted should be inclusive of all required accessories.
(II)The Bidtler shall have to give unit price rate including all charges as per the Annexure-A.
The Rate shall be indicated both in words and figures. In case of discrepancy, the rate quoted in
words in the Quotation shall be taken in to consideration.
9. No claim shall be enteftained towards any expenses made by the Bidders for submission of the
call notice'
Quotation in case of cancellation or withdrawal ol Quotation
10. The Bidder shall make his own arrangement for procurement of the stores which is required in
connection with the supply.
l
l.
Delivery
of
materials must be accompanied with Manufacturing Test Certificate/Guarantee
Cer1ifi cate/Manual/Leafl ets, as applicable.
12. Unilateral stoppage of supply by the supplier without prior written permission shall be considered
as breach
ofcontract and the authority
reserrr'es the
right to take action ,as deemed fit.
13. Materials rejected by the authority shall be immediately removed with the knowledge of the
undersigned. If it is not removed within the specified time, the authority resefl,/es the right to remove
the same and deduct the expenditure incurred from the supplier's bill .The authodty shall in no way be
held responsible for any detoriation or damage to the materials under any circumstances what-so-over'
f4. BID EVALUATION: - The Purchaser will
evaluate and compare the bids determined to be
substantially responsive i.e. which are properly signed; and confirm to the terms and conditions, and
specifications. The bid would be evaluated separately for each item:
Sales
Tax / VAT /Entry Tax in connection with sale of goods shall not be taken in to account in
evaluation.
be a considering factor of
Quality, Price & Suitability for purpose of training to the ITI's trainees shall
selection of testing machines, tools & equipments. The bid shall also be evaluated taking into
consideration of after sale service provided by the firm, experience in supply of similar type of Tools,
Equipments and Machineries to reputed organization. Reputed Brand shall also be a considering factor
for selection of the item. The authority is empowered to select any of the Quoted items taking in to
account Quality
15.
& Price, which may not be lowest quoted price.
PERFORMANCE SECURITY:-
i) The Supplier shall submit a performance security Guarantee to the purchaser lor an amount of 10%o
olthe coniract value after completion of supply and before release of his payment as enclosed
period of
at Annexure-B. The validity of the performance security gllarantee should cover the warranty
the supplied-materials.
ii) No payment shall be released to the supplier against his bill without
performance security guarantee'
lType
textl
,
submission
of
the
n
-6
iii)
for
The proceeds of the performance security shall be playable to the purchaser as compensation
any loss resulting from the Supplier's failure to complete its obligations under the contract.
iv) The performance security shall be denominated in Indian Rupees and shall be in
one of
the following forms:
(a)
A Bank
in the
Guarantee issued by a Nationalized bank located in India in the form provided
bidding documents acceptatlle to the Purchaser, or
(b) A Demand Draft from SBI In favour of the Principal, ITl,Bhawanipatna'
to the
The performance security guarantee will be discharged by the purchaser and retumed
Supplier noi later than 30 days following the date of completion of its validity.
16. PERFORMANCE STATEMENT:
-
The Biclder shall subrnit his experience in supply of the Tools,
Equipments&Machinesforlast3(Three)yearsinperformancestatementformatinAun.erure4,
17, DELIVERY OF GOODS/CONSIGNEE: - The materials shall be delivered at I.T.I,Bhawanipatna
Purchase Order. Any delivery beyond the stipulated
, within 90(Ninety) days from the date of issue of
i 0% of
period shall attract a penalty of 0.57o per week of the contract amount subject to maximum of
gontract value. The goods on delivery will be physically verified by the I'T.I.,Bhawanipatna through
Technical Experts of
the
Institute and
it
shall be
the
responsibility of the suppliers to arrange
demonstration on functioning of Individual goods wherever required'
18. PAYMENT TERMS:- 100% payment shall be made(deducting penalty amount
3o(Thirty) days
after receipt
of
il
any) within
stock entry cerlificate after satisfactory supply, installation,
demonstration & training of the goods within due date of delivery'
19. FREE AFTER SALES SERVICE: The supplier has to give 02 (Two) lree after sales service
within the warranty / guarantee period, wherever applicable'
20. BID
VALIDITy:
date of opening
The price quoted in the bid should valid at least for 9o(Ninety) days from the
ofthe Quotation.
21. PACKING/FORWARDING/INSURANCE: The materials dispatched shall be properly packed
insured at
and forwarded to avefi any incidental damages during transit/ handling. The material may be
supplier's cost.
22. WARENTEE/GUARENTEE:
The goods shall be covered with warantee/guarantee for
minimum period of l2(Twelve) Months from the date ol supply. The firm shall provide prompt after
sales services and attend complaint within a week to prevent disruption of work in the I.T.I.
lType textl
q
23. TAXES AND DUTIES: The Bidder shall be entirely responsible for all
Taxes, Duties, License
until delivery of the contract goods to the consignee. The Bidder has to
provide Valid VAT Clearance certificate as applicable. Attested copies of Valid VAT/CST clearance
paid by the
certificate and pAN Card must be furnished along with the Bidding Documents. Entry Tax
fees, Road permits etc. incurred
Bidder is allowed once only on production of the money receipt for such payment,
if
claimed by the
Bidder.
must
24. AUTHORIZATION: In case of Authorized supplier of the Manuflacturer/Dealer the bid
accompany with authorization lrom the Manufacturer/Dealer in Annexure-D.
as a token of
25. ACCEPTANCE: - The Bidder should sign each page of Bid document with seal
Bid
acceptance of atl terms and conditions of the Quotation and should submit along with the
documents,
26. PURCHASER'S RIGHT: The purchaser is having the right to accept/reject/extend any or all bids
without showing any reason there of. He may also withheld the payment on account of subsequently
protect himself
discovered evidence ,nullify the whole or a part to the extent as may be necessary to
from loss on account of
:
(i)Defective supply not remedied.
(ii)Damaged caused due to depaftmental propefty.
27. AWARD OF CONTRACT: Purchase order shall be placed with successful bidders. As a token of
sent within a
acceptanoe, the supplier shall return one copy of the purchase order out of the two copies
week.
2g. CORRUPT pRACTICE: No bidder shall contact the purchaser on any matter relating to bid from
opening time of the bid till the contract is awarded. Any effofis by the bidder or his agent to influence
the purchaser may result in the rejection
ofhis bid and forfeiture olbid security.
29. BID LANGUAGE AND CURRENCIES;
All information in the offer & all
correspondences &
quoted price
documents, printed literatures furnished by the bidder should be written in English. The
will
be Indian Rupees only.
30. RESOLUTION OF DISPUTES BY ARBITRATION
-
The Purchaser and the supplier should
try to resolve the disputes , if any , arising out of the contract , amicably between themselves, failing
which the same shall be referred to the Principal, ITl,Bhawanipatna-766001 for adjudication as the sole
Arbitrator under the provisions of the Arbitration and conciliation Act,1996 whose decision will be
final and binding on all the parties to the dispute
I
lYpe textl
fr
6
31. JURISDICTION OF THE COURT: The purchaser and the supplier shall agree that
the
pafiies
competent court at Bhawanipatna shall have the jurisdiction to try and decide an1'thing between the
and they may approach the Competent Court at Bhawanipatna,
32. BIDDER,S RESPONSIBILITY
:( i)
if required
at any time'
The Bidder shall bear all costs associated with
the
preparation and submission of its Tenders and the Principal, I.T.I.,Bhawanipatna hereafter relerred to
as ,,the purchaser,',
will in no case shall be responsible or liable for
these costs, regardless of the
conduct or outcome of the bidding process.
(ii) The Bidder is expected to examine all instructions, forms, terms &, conditions as well as specifications
in the bidding documents .Failure to furnish all information's required by the bidding documents or
submission of a bid not substantially responsive to the bidding documents
in
every respect will be at
the Bidder's risk and may result in rejection of its bid.
33. AMENDMENT OF BIDDING DOCUMENTS
(a) At any time prior to the deadline for submission of bids, the purchaser may, for any reason,
whether at its own initiative or in response to a clarification requested by a prospective bidder,
modify the bidding documents by amendment.
(b)
All
prospective bidders who have received the bidding documents
amendment in writing or by cable or by fax, E-mail and
will
will be notified of the
be binding on them'
(c) In order to allow prospective bidders reasonable time in which to take the amendment in to account
in preparing their bids, the purchaser, at its discretion, may extend the deadline for submission
ol
bids.
Principal, ITI, BhawaniPtna
ANNEXURE-A
Sl.No
Schedule
Name of the Schedule
Page.
1-4
1
1
LIST OF HAND TOOLS
2
2
LIST OF EQUIPMENTS
1-2
1
3
3
4
4
LIST OF MEASURING INSTRUMENT
1-2
LIST OF FURNITURE
ffiffi-*s
-"ffi:llls;
h
q
ANNEXURE.B
BID SECURITY FORM
Whereas... ...
....
(Here in after called "the Bidder") has submitted its bid dated" " '
d;;;i;rili.tionofbid)forihesupplvof......... " " ''. """
goods) ( herein after called "the Bid")
"(nameanddescriptionofthe
.
(name
KNOW ALL PEPOPLE by these presents that WE
bank)of .........................(name ofcountry), having our registered office
at "'
of
'
''"'(name of
for
Purchaser) (herein after called "the purchaser") in the sum of-------------------------------------itself ,its strccessors' and
which payment well and truly to be made to the said Purchaser ,the Bank binds
(address ofbank) ( herein
after called "the Bank"),
assigns by these presents .Sealed
are bound
unto''' '
''
with the Common Seal ofthe said Bank this------------day of------------
----------2013.
THE CONDITIONS of this obligation are:
1. Ifthe
2.
Bidder
Fotm or
(a) withdraws its Bid during the period of bid validity specified by the Bidder on the Bid
with the Quotation ;or
iUi no., not accept the corrlction of enors in accordance
period of
Ifthe Bidder , having been notified ofthe acceptance of its bid by the purchaser during the
bid validity:
(a) Fails or refuses to execute the contract form ifrequired, or
(b) Fails or refuses to furnish the perlormance security, in accordance with the Instruction to
Bidders;
demand,
we undertake to pay the Purchaser up to the above amount upon receipt of its first written
the Purchaser will
without the purchaser having to substantiate its demand, provided that in its demand
note that the amount claimed by
it is due to it , owing to the occurrence of
one or both of the two
conditions , specifying the occurred condition or conditions'
the period of the
This guarantee will remain in force up to and including Forty Five (45) days after
the above date'
bid validity, and any demand in respect thereof should reach the Bank not later than
Note: The bank guarantee [submitted bv Indian
"'uuti
be in the name of executing bank.
accordance with Siamp Act. 'ihe stamp paper should
'n"'tu;t;;tti::;::"":ffi;:l'
h
ANNEXURE.C
PRICE SCHEDULE NO........ (ITEM WISE)
1
2
4
J
PR, CE FOR EAC
'lo
*'
o-
o
a
2
3
J
o
o.
o
tn
.{
|, .:
F.d
x
A)
o
=3
0a
ln
X
o
o
tll
!D
TD
X
ro
&
3
0a
o5
3th
p
oE
o
o-
@!)
o
(!
<a@
I)
e
qo-
id
@6
o
.D
Place:
Date
:
of
ao
p(D
X
o
@
oo
!)
D)
!)
(b)
(c)
(d)
(e)
(0
(e)
a+b+c+d+e+f+g
Unit price in (8) (Rs. In words)
Note:- In case
i;o
-.
o
o
:
(a)
:
E
(}
ln
o
o
L
zo
.)
oo
o-
o
o
o
X
c-
o
o
t0
ID
0a
rd
co
6B
R"
.?
thO
l0
a
E"
o
{uN IT
FN
3
9
8
7
6
5
discrepancy between unit price and total price, the unit price shall prevail
Signature ofBidder.
Name
(4x8)
v-
ar?
ANNEXURE.D
PERFORMANCE SECURITY FORM
To
The Principal
INDUSTRIAL TRAINING INSTITUTE, BHAWANIPATNA
Near Kendriya Vidyalaya, At,Do: Bhawanipatna
Diat: Kalahandi, PIN-766001 . ( Odisha)
WHEREAS............
Q',lame
,,The Supplier" has under taken,
supply... .. . . . . . . .
in
pursuance
of
of Supplier) hereinafter called
Contract Q'Jotification
of
dated,........'20...."1o
..........(Description of Goods and Services) hereinafter called" the
Contract".
AND WHEREAS it has been stipulated by you in the said Contract that the Supplier shall
furnish you with a Bank Guarantee by a recognized Bank for the sum specified therein as security for
compliance with the Supplier's performance obligations in accordance with the Contlact.
AND WHEREAS we have agreed to give the supplier
a Guarantee:
THEREFORE WE hereby affirm that we are Guarantors and responsible to you, on behalf of
............(Amount of the Guarantee in
the Supplier, up to a total of. . . ...... . . . ... . .
Words and Figures) and we under take to pay you, upon your first written demand declaring the
the
Supplier to be in default under the Contract and without cavil or argument, any sum or sums within
limit of .................(Amount of Guarantee)as aforesaid, without your needing to prove or to show
grounds or reasons for your demands or the sum specified therein'
This Guarantee is valid until the
'.....
... day
of......'.'.. '20"""
Signature and Seal of Guarantors
Date.................20...............
Address:
Note: The Bank Guarantee (Submitted by Indian Supplier) should be executed on stamp paper
in accordance with stamp Paper act. The stamp paper should be in the name of Executing Bank'
ANNEXURE-E
PERFORMANCE STATEMENT
(In proof of eligibility of bidders for the period of last three years)
Order placed by the
Organization with
Address.
Order No.
&
Date,
Stores
Value of
Date of
Remarks
Ordered.
Order.
completion of
indicating
delivery.
reasons
for late
delivery, if any.
If the equipments are giving
troubles
free service,(Attach a certificate
from the purchaser /Consignee
whereYer applicable).
\a/
1\
ANNEXURE.F
To
The Principal
INDUSTRIAL TRAINING INSTITUTE, BHAWANIPATNA
Near Kendriya Vidyalaya, At/Po: Bhawanipatna
Diat: Kalahandi, PIN-766001 . ( Odisha)
REF: QUOTATTON CALL NOTICE
Dear Sir,
who are established and
We
having
reputable manufacturers/authorized distributors/ dealers of
(Address of
offrce at
Q'{ame and address of Agent)
office) hereby authorize M/s.
to submit a bid and sign the contract with you against the above bid'
are authorized to
No company or firm or individual other than M/s.
bid and conclude the contract in this business against this specific IFB'
We hereby extend our full guaranty and warranty as per general conditions ol contract for the
goods and services olfered by the above farm against this bid'
Yours faithfullY,
(Signature for and on behalf of manufactures/authorized distdbuters/dealers)
Note: This letter of Authority should be on the letterhead of the manufacturers/authorized
power of
distributers/dealers and should be signed by a person, competent and having the
attorney to bind the manufactures / authorized distributers/dealers'
Bidders in its bid,
It
should be included by the
LIST OF HAND TOOLS UNDER C.O.E. SCHEME
SCHEDULE NO.l
sl.
no.
1
2
4
5
6
7
8
9
10
ll
12
13
l4
15
16
17
18
19
20
21
22
23
24
o(
26
27
2a
29
30
31
34
36
3t
38
39
40
47
42
Harnmer B.P 0.5 Kg
Hammer lead 1Kg
Hammer peening with handle
Hammer block with handle
Hollowine hammer with handle
Hand hammer 1 Kg with handle
Hammer ball pein 1 Kg with handle
Hammer ball pein 0.9 Kg with
handie
Hammer smith 1.8 Kg with handle
Hammer block Scm thick X 60
square
Hammer scaling/ Chipping hammer
0.25 Ks
Combination plier 1Somm.
Cutting Plier 200mm
Wire Cutter
SaJety Goggles white
Gas welding goggles
Chipping Goggles white
Flat file bastard 300 mm.
Flat fi1e 2"a cut 250mm
Flat frle smooth 200mm
Half Round file 2"a cut 250mm
Triangular Iile smooth 200mm
Square file 2.d cut 250mm
Flat Iile smooth 200mm
Flat file Rough 350mm
Square file Rough 250mm
Ha-1f Round frle Bastard 300mm
Needle file set
Rasp cut Iile 250mm
Round Ii1e 150mm
Engineer screw driver
Screw driver set{mulli head)
Screw driver hear,y duty 300mm
Scribing block universal 300mm
V' block universa-l 300mm
Try square 150mm
Outside spring caliper 200mm
Divider spring 200mm
Inside spring caliper 20Omm
Outside spring caliper 150mm
Divider spring 150mm
Inside spring caliper 150mm
Qty
Specification
Name of the items
'/rq
TAPARIA (Product No- WH 5008)
17
l5l/lSO specified
lSl/lSO spec ified
l5l/lSO specified
lSl/lSO specified
lSl/lSO specified brand
o2
o4
02
o4
o2
lSl/lSO specified brand
lSl/lSO specified brand
o2
lSl/lSO specified brand
lSl/lSO specified bra nd
o4
o8
bra nd
brand
bra nd
bra nd
76
c:o
ESAB
TAPARIA (Product No- 1621-6)
TAPARIA (Prod uct No- 1101-8)
TAPARIA (Prod uct No- 1122-6N)
lSl/lSO specified bra nd
ESAB FG2 Prod uct N0-2001003002
lSl/lSO specified brand
17
JK
o2
o2
89
24
68
27
38
JK
2t
JK
JK
o4
o4
o4
JK
17
JK
26
o8
IK
]K
IK
18
JK
JK
01
o4
JK
17
JK
TAPARIA (Prod uct No- 936)
l7
TAPARIA (Prod uct No- 840)
0lset
TAPARIA (Product No- 929)
o6
o2
o2
76
lSl/lSO specified bra nd
lSl/lSO specified brand
lSl/lSO specified brand
bra nd
12
lSl/lSO specified bra nd
o2
lSl/l5o specified
10
77
77
17
lSl/l50 specified
bra nd
l5l/lSO specified brand
lSl/lSO specified bra nd
lSl/lSO specified bra nd
,-rr*ffi"
43
44
45
46
47
48
49
50
51
52
53
54
<(
56
57
58
59
60
61
62
rr.1
64
65
66
67
68
69
70
tl
72
74
75
76
7A
79
80
81
a2
83
84
85
Centre Rrnch loomm
Center punch 9mm x 127mm
Straight edge steel 1 meter
Straieht edge steel SOOmm
Spirit 1eve1 2V 25O, 05 meter
Adiustable spanner 15omm
Adiustable spanner 200mm
Adiustable spanner No. 12 / 300mm
D.E. Spanner 6mm to l9mm
D.E. Spanner 6mm to 32mm
D.E. Spanner 12mm & lSmm
D.E. Spanner 6mm to 15mm
Reduction sleeve MT
Ansle plate 200 x 100 x 20omm
Solid parallels in parrs(different
sizes)in metric
Oil can pressure feed 500mg
C)il stone 150 x 5O x 25mm
Hand dril1 0 to 8mm
HSS Twist dri11s parallel shank (3 to
13mm)
Dri11 chuck 0-20mm with taper
shank
Centre dri11 A1 to 5
HSS Dril1 taper shank 12 to 2Ornr:-r
in ster: of lmm
Reamer 6mm to 13mm by lmm
Tap & Die set in box metric pitch
Grindine wheel dresser(star tvpe)
C clamps 100mm
C clamps 150mm
C clamps 200mm
C clamps 300mm
Hacksaw frame heaw type 300mm
Magnifying glass 75mm
Maenifvine slass 150mm
Rieht cut snip 250mm
Left cut snip 250mm
Rivet sets Snap & Dolly combined
3mm
Rivet sets Snap & Dolly combined
4mm
Rivet sets Snap & Do1ly combined
6mm
Hand groover 3mm
Hand groover 4mm
Hand groover Smm
Grip wrench 200mm
Bessing mallet
Endfaked mallet
TAPARIA (Product No- 1984)
L7
TAPARIA (Product No- 1986)
51
o1
01
o2
o1
01
01
l5l/lSO specified bra nd
lSl/lSO specified bra nd
lSl/lSO specified bra nd
TAPARIA (Product No- 1170-6)
TAPARIA (Product No- 1171-8)
TAPARIA (Product No- 1.17 3-12]1
TAPARIA (Product No- DEP 08)
TAPARIA (Product No. DEP 12)
t))
At
06set
08 set
16
TAPARIA
TAPARIA (Product No- DEP 06)
0lset
lSl/lSO specified bra nd
lSl/lSO specified bra nd
l5l/lSO specified bra nd
02set
o2
16
pairs
lSl/lSO specified brand
12
l5l/l5O specified brand
ADDISON
02
o2
01set
ADDISON
01
l5l/l50 specified brand
ADDISON
O2set
ADDISON
03sets
lset
ADDISON
O
lSl/lSO specified brand
lSl/lSO specified brand
01set
TAPARIA (Prod uct No- 1261-4)
TAPARIA (Prod uct No- 1263-6)
TAPARIA (Prod uct No- 1264-8)
lSl/lSO specified brand
lSl/lSO specified brand
lSl/lSO specified bra nd
lSl/lSO specified brand
lSl/lSO specified brand
l5l/lSO specified brand
REP
UTED BRAND
REPUTED BRAND
REPUTE D BRAND
REPUTED BRAND
REPUTED BRAND
REPUTED BRAND
lSl/lSO specified brand
REPUTED BRAND
REPUTED BRAND
01
o8
08
o8
08
J.+
o2
76
o4
o4
o4
o4
o4
o4
o4
o4
o2
o4
o4
9
llrstir
86
87
88
89
90
Steel rule 600mm
Steel rule 300mm
91
92
93
94
Tripaning tool 70mm
Crow bar 910 x 25mm
Soldering Copper Hatchet type
500ems
Hand eloves pairs
Apron leather
Leather Sleeves pairs
Safety boot
95
Welding screen helmet type
96
Welding
97
98
99
100
Spark Lighter flint type
Chisel cold flat 25mm x 250mm
Cold Flat Chisel 19mm
Cross cut chisel cold 9mm
Flat Cold Chisel 6mm
Knife edge chisel
Scriber 15cm body knuclded
Bench vice 100mm jaw
Bench vice lSomm iaw
Hald vice 50mm.jaw
Pipe wrench 25cm
Pipe wrench 35cm
Tin man's square 45cm x 60cm
Pipe cutter 50mm dia
Coloured glasses 108 x 82 x 3mm
DIN 9A
Coloured glasses 108 x 82 x 3mm
DIN 11A
Coloured glasses 108 x 82 x 3mm
101
702
103
to4
105
106
l07
108
109
110
111
112
113
774
115
116
tt7
118
hald screen
DIN 13A
White glasses 108 x 82 x 2mm
Number punch 6mm
Letter punch 6mm
Rtrbber hose clips
Spindle key (for opening cylinder
IS
/lSO
IS /lSO
IS /lSO
ts /lSO
specified
o2
01
bra nd
specified bra nd
specified brand
specified brand
ESAB
o2
o8
Product No- 2001005002
Product No- 2001007001
ESA B
Product No- 2001006003 & Product
No- 2001006004
ESAB Eco arc helmet (83 X 108mm)
Product No- 2001001003
ESAB Hand shield armour (83 X 108mm)
Product No- 2001001004
ESAB
53
48
40
29
43
39
lSl/lSO specified bra nd
TAPARIA (Product No- 106)
TAPARIA (Product No- 1046)
l5l/lSO specif ied brand
TAPARIA (Prod uct No- 101)
34
o4
31
o4
lSl/lSO specified brand
o4
lSl/lSO
lSl/lSO
lSl/lSO
l5l/lSO
brand
17
bra nd
06
o4
o2
specified
specified
specified
specified
A1
oi
lSl/lSO specified bra nd
ESAB
l>/
17
bra nd
bra nd
TAPARIA (Product No- 1272)
01
01
TAPARIA (Product No- 1274)
lSl/lSO specified bra nd
08
01set
64
lSl/lSO specified bra nd
64
lSl/lSO specified brand
64
lSl/lSO specified brand
80dor"r,
lSl/lSO
lSl/lSO
lSl/lSO
lSl/lSO
03 set
lSl/lSO specified brand
15l/lSO spec;fied brand
specified brand
specified brand
specified bra nd
specified brand
0lset
150
24
va-1ve)
119
120
727
t22
r23
124
125
726
727
Tip cleaner
Outfit Spanner
Welding Helmets
Air buds
Over coat
Steel measuring tape 2Omtrs
Steel tape 3meters
Funnel
Wire brush (S.S.)
24
24
lSl/l50 specified brand
lSl/lSO specified brand
lSl/lSO specified brand
rsl/rso sPEctFrED BRAND
17
77
lSl/lSO specified brand
lSl/lSO specified brand
l5l/l50 specified brand
01
o4
o4
72
lSl/lSO specified bra nd
ESAB
mffii'
PRI[filruaa]ai
,
N,
D,-,
ilqolffr*ti,oglodnute
BHAlllf,rrrlPrlla
L2a
729
130
131
133
134
135
136
737
138
139
140
147
t42
t43
t44
t45
146
147
t48
l4s
i50
151
1<'
153
154
155
156
157
158
159
160
161
162
163
t64
165
L66
t67
168
169
170
177
172
Wire brush {M.S.}
Scrapper 1"
Scrapper 2"
Dust brush
Velocity cap
White Kerosene
Methylene
Brush holder
Mashing tape
Mashing paper
Drop sheet
Hardle or bottom sit for alvil Scm
Tons blot 300mm
Tong blot 500mm
Tons blot 1000mm
Tong blot 1500mm
Tong side 300mm
Tong side 500mm
Tons side 1000rnm
Tone side 1500mm
Tong flat 3o0mm
Tong flat 500mm
Tong flat 1000mm
Tons flat 1500mm
Tonq round 300mm
Tong round 500mm
Tong round 1000mm
Tong round 1500mm
Tong hollow bit 300mm
Tong hollow bit 500mm
Tons hollow bit 1000mm
Tong holiow bit 1500mm
Punch round 18 to 36mm x 6mm
raisins bv 6mm
Punch round 6 to 15mm x 2mm
raisins bv 3mm
Electrician Knife
Wal1 jumper octagonal 37mm x
45Umm
Electric Soldering iron 35W
Electric Solderins iron 125W
Rubber gloves 5000V
Bar magnet 15omm
Horse shoe magnetl5Omm
Tweezers
Crimping tools
Welding screen helmet type
74
o2
REPUTED BRAND
rsr/ SO specified bra nd
rs r/ SO specified brand
rs r/ SO specified brand
rs r/ SO specified bra nd
rsr/ SO specified bra nd
rsr/ SO specified brand
rs r/ SO specified bra nd
ls r/ SO specified bra nd
rs r/ SO specified bra nd
tst/ SO specified bra nd
rsr/ SO specified bra nd
lSl/lSO specified bra nd
lSl/lSO specified bra nd
lSl/lSO specified bra nd
lSl/lSO specified brand
o2
o1
05 Lte.s
O5 tters
01
01rol1
01rol1
o1
o4
o6
06
o6
06
06
06
06
06
lSl/lSO specified bra nd
lSl/lSO specified brand
lSl/lSO specified
lSl/lSO specified
lSl/lSO specified
lSl/lSO specified
l5l/lSO specified
l5l/lSO specified
lSl/lSO specified
Sl/lSO specified
Sl/lSO specified
Sl/l5O specified
5l/lSO specified
Sl/lSO specified
bra nd
brand
brand
o6
06
06
06
06
o6
o6
06
o6
o6
06
O2sets
bra nd
bra nd
bra nd
brand
brand
brand
brand
bra nd
bra nd
Sl/lSO specified brand
Sl/lSO specified brand
lsl/lSO specified brand
02sets
lSl/lSO specified brand
t7
lSl/lSO specified bra nd
01
lSl/lSO specified bra nd
o4
o2
SOLDRON
SOLDRON
lSl/l5O specified brand
lSl/lSO specified brand
lSl/lSO specified bra nd
lSl/lSO specified brand
lSl/lSO specified brand
i' tech 9-13 helmet Product
ESAB Origo
No- 2001001001
O2
Parrs
01
01
16
0lset
o6
W,
eHS iuiAdpaina
\Y/
/\q
t9/
^7
SCHEDULE NO. -2
sl.
no.
1
2
4
5
6
7
8
9
10
11
72
13
74
Name of the items
Electric Hand dri1l machine 10mm
capacity
Electric Hand drill machine 6mm
capacity
Pneumatic rivet gun
Genera,l purpose portable forge
Liquefied Petroleum Gas (LPG)
Cylinder
Liquefied Petroleum Gas (LPG)
Regulator
Liquefied Petroleum Gas (LPG) Torch
Anvil 5O Kgs with stand
Portable Pneumatic Shear
AG 4 Hand grinders
AG 7 Hand grinders
Surface plate 900x900x1200mm with
table
Leg vice 150mm on staad
Welding torches with 1Onos. nozzle
Specification
Qtv
o1
ISI/ISO SPECIFIE D BRAND
o3
ISI/ISO SPECIFIE D BRAND
rsr/r5o SPECtFtED BRAND
o2
o2
o2
tsl/tso SPECtFtED BRAND
ISI/ISO SPECIFIE D BRAND
o2
ISI/ISO SPECIFIE D BRAND
r5r/rso sPEctFtED BRAN
oc
01
o2
o4
o7
D
rsr/rso SPEclFtED BRAND
ISI/ISO SPECIFIED BRAND
ISI/ISO
SP ECIFIE
D BRAND
ISI/ISO
SP ECIFIE
D BRAND
I5I/ISO SPECIFIE D BRAN
lsl/rso
01
D
SPEctFtE D BRAND
ESAB make (SAFFIRE2HP)
wilh nozzle
o4
06Sets
no.2,3,6.7,IO.73.20.30.35.45
15
16
t7
18
Earth clamp 600 amps
Earth clamp 400 amps
Electrode holder 4O0 amps
Oxy-Acetylene Cutting torches with
06
24
ESAB make
ESAB make
ESAB make
13
O4Sets
ESAB make
nozzles
t9
20
2I
22
ZJ
24
25
26
c,7
28
29
Hea'i,y duty Oxy-Acetylene Cutting
torch with nozzles
Welding rubber hose pipe for Oxygen
8mm
Welding rubber hose pipe lor
Acetylene 8mm
Welding rubber hose pipe for Oxygen
5mm
Welding rubber hose pipe for
Acetylene Smm
Doubie stage Oxygen Pressure
Regulator
Double stage Acetyiene Pressure
Regulator
Welding cable to carry 400 Amps with
flexible rubber
Bench shear capacity up to smm
hand operated
Gas welding table with 60cm fire
bricks on stand
Lug for cable
04Sets
ESAB make
ESAB make Prod
ESAB make
uct No.1300100193
Product No.1300100203
ESAB make Prod
uct No.1300100190
ESAB make Prod
uct No.1300100200
335mtrs
335mtrs
9O
mtrs
90 mtrs
ESAB make (lOX63B)
24
Product No.4330187200
ESAB make(lDA50B)
Prod uct No.4330169300
24
1OO
ESAB make
rsr/rso
mtrs
01
sPEcrFrE D BRAND
Size:-(L XB XH)822 x 822 x
92Ornrn
lsl/r5o SPECtFtED BRAN D
72
08
!@V*r;rtY
\'
pRiN9.t"*L^7
I
TRAlltlne iNsrrrurr
hdt,B(rtal ^ltdrnl.tU lnst!tr,t!.
rN DUSTRTAL
lltrr.
,!
rt
,tF
,
30
Electrode drying oven
lemp. range u-2suoc
thermostat-tically controlled,
Electrode storage 10 Kg capacity
o2
41
(ESAB make)
31
.)a
.,a
34
35
36
.)/
38
39
40
4l
42
Fibre welding booth
ESAB welding Curtains have Versi Flex
Frame
Oxygen cylinder
Acetylene cylinder
Argon cyiinder
Coz cylinder
Fire extinguisher
Elco meter
D.C. shunt motor 1HP
250V(Laboratory type)
Universal motor 750W AC/DC 250V
Transformer single phase 5o0ma. /
250
/12V
L.F oscilloscope with attenuation
probes
Star Delta Starter (contact type 8
points)
43
44
DC Power Supply 0V- 110V
Dye Penetrant Testing Kit
/
5A
ISI/ISO SPECIFIE D BRAND
ISI/ISO SPECIFIE D BRAND
ISI/ISO
SP ECIFIE
D BRAND
lsr/rso SPEctFtED BRAND
tst/tso SPEcrFtED BRAND
ISI/ISO SPECIFIE D BRAND
tst/tso sPEctFtED
BRAN D
ISI/ISO SPECIFIE D BRAND
ISI/ISO SPECIFIED BRAND
ISI/ISO SPECIFIED BRAND
ISI/ISO SPECIFIE D BRAND
tst/rso
SPECtFtE D BRAND
Non destructive testing aerosols
(NDT) Esab make
t,b/
26
o7
07
07
06
08
01
o1
01
o4
01
01
01
OSsets
'kq
LIST OF MEASURING INSTRUMENT UNDER CTS SCHEME
SCHEDULE NO-3
-ITEM
DESCRIPTION OF' TIID ITEMS
NO.
Caliper
SPECIFICATION/ BRAND
QTY.
8"/20Omm. LCM 0.0005"/0.01mm
ISI/lSO Specification Brand
02 Nos.
mm)
2.
Gauge wire
Impellar ISI/lSO Specification Brand
03 Nos.
3.
Digimetric Electronic outside Micrometer
02 No.
4.
Digimetric Electronic outside Micrometer
5.
Vernier Caliper (lnside, Outside & Depth)
0 to 25 mm ISI/lSO Specification
Brand
25 to 50 mm ISI/lSO Specification
Brand
25omm. ISI/lSO Specification Brand
6.
Single Phase K.W. Reg meter
5A, 250V ISI/lSO Specification Brand
03 Nos.
7.
Three Phase K.W.Reg meter
15A, 440V ISI/lSO Specification Brand
02 Nos.
8.
g.
Telescopic gauge
02 No.
10.
Thread plug gauge
ISI/lSO Specilication Brand
No. 0 to 7 M1
M,20 & M-21
i1.
Thread Ring gauge
M-20 & M-21
Ol Each
12.
Earth tester
500 Volts ISI/lSO Specification Brand
02 Nos.
13.
Siip gauge as Johnson metric
ISI Standard Specification
01 No.
14.
Fillet Radius Gauge
ISI Standard Specification
O1 No.
15.
Dial vernier caliper with metric & inch dial
01 No.
16,
Vernier micrometer
17.
Vernier micrometer
18.
Ammeter M,C. (Penai board type)
200 mm or 8" reading 0,05 mm or
0.001" ISI /lSO SDecification Brand
0 to 25 mm outside ISI/lSO
Soecification Brand
25 to 50 mm outside reading 0.001
mm
0-1 Amp ISI/ISO Specilication Brand
19.
Ammeter M.C. (Penal board type)
0-5 Amp ISI/ISO Specification Brand
06 Nos.
20.
Digital Multimeter 3 7, digit
ISI Standard Specification
05 Nos.
2t
Soldering iron.
25 Watt. Round bit standard brand
32 Nos.
22.
D.C. Ener$/ meter {w/H or A/H) type
Continuitv meter
220 Volt 5 Amps.
02 Nos.
ISI/ ISO Specification Brand
02 Nos.
Wheel Alignment Gauge
Magnetic Type with turn Tables
1 No.
Watt Meter Dynamo type
5A, 250V ISI/lSO Specification Brand
02 Nos.
1
24.
26.
Electronic Vernier
(inch &
Morse taper plug & Ring Gauge
Cylinder gauge {Bore dial gauge) with
ISI
/lSO Specification Brand
01 No.
01 No.
01 Set.
01Each
01
No.
01 No.
OS Nos.
1No.
accessories
27.
Protactor 0- 180 degree
ISI/lSO Specilication Brand
25 Nos.
24.
Drawing Board 580x80Omm
ISI/ ISO Specification Brand
22 Nos.
,rffitr'
Ith05mdrtFllihr3 Srtitti t''
rrL..wrnlDNttl,]
First-aid box
Instructor Table
Instructor Chair
Arc welding table
Marking off table
Trolly for cylinder H.P. unit
containing 02nos cylinders
Made out of 22SWG G.I. sheet, Size:- (L x W x
18" x 10" x 6" with lockine facili
Size: - (L x W x H) 48" x78" x 18" with fixed
self 04nos. made out of 1mm C.R.Sheet. With
double coated red oxide & enamel paint. Leg
will be 4" extra. Lock & 2nos.kev with handle.
Size: - (L x W x H) 48" x 24" x 30" With 03
nos. drawers of size (24" x 17" x 22"J (L x \N x
H)Frame Made out of M.S. Square tube, Size
(25x25x1mm) Top made out of ISI marked
pre-laminated board 1Smm thick. Draw box
made out of lmm C.R.Sheet. Iron frame paint
with double coated red oxide & enamel paint.
Made out of M.S. Square tube, Size
(25x25x1mm) seat size 450 x 450 x 18mm
made out of ISI marked pre-laminated board
1&;zm thick. With hand rest. Iron frame
with double coated red oxide & enamel
Size: - (L X B X H)822 x 822 x 920mm witJ:
top 8mm MS sheet with positioner
attachment and provided guard in (L) shape
of 1mm C.R.Sheet.
1200 x 1200 x 90omm high, 1eg 50 x 50x
Smm angles with leg binder. Iron frame paint
with double coated red oxide & enamel paint.
Size :- 3'x l'x 4' (L x W x H) made of MS
angle 35x35x5 mm. Iron frame paint with
double coated red oxide & enamel oaint.
\1%,
LrsT oF FURNTTURE UNpER C.O.E. SCHEME TTTBHAWANTPATNA
,
1"1
SCHEDULE NO.-4
5t.
NAME OF THE ITEMS
SPECIFICATION
QTY
Size: - (L x W x H) 48" x78" x 18" made out of
lmm C.R.Sheet. With double coated red
oxide & enamel paint. Leq will be 4" extra.
Size :- 8'x 4'x3'{L x W x H) with top frame
made of MS angle 35x35x5 mm binded with
6nos. ofleg with MS channel 2". Top wooden
plank of non Sal wood 36mm thick. Iron
frame paint with double coated red oxide &
enamel paint.
Made out of M.S. Square tube,
Size(25x25x1mm) Top seat size 4OO x 300 x
18mm made out of ISI marked pre-laminated
board with leg binder. Leg will be taper,
height from qround 1eve1 to top 2.5'.
. High quality ball bearing slides enable
smooth drawer opening. . Rear locking
system avoids opening of the drawers. . The
Castors are smooth, strong & chemical
resistant and have a load capacity ofup to
5501bs. . Superior powder coating on the
cabinets. Tools trolley with 5 drawers size: -
t6
NO.
1
Steel lockers with 8 pigeon
holes with individual locking
facility
Working bench
2
Stool
Tool cabinet
4
Discussion Table
5
Book Shelf (G1ass Panel)
6
Storage Rack
7
Storage Shelf
8
t6
153
l8
749x52O x 780 [LxW x H)
Size: - 6'x 4'x 3' (L x W x H) with top frame
made of MS Rectangular tube Size:-SO x 25
xlmm binded with 6nos. of leg with MS
Rectangular tube. Top made out ofISI
marked pre-laminated board /plynrood with
sun mica fitting 36mm thick. With 02 nos.
drawer size (24" x 76" x 4")
( L x W x H)lron frame paint with double
coated red oxide & enamel paint.
Size: - (L x W x H) 48" x78" x 18" with fixed
self 04nos. made out of 1mm C.R.Sheet. With
double coated red oxide & enamel paint. Leg
will be 4" extra. Front side 04nos.
transparent glass 3mm thickness fixed for
visibility of books.
Size: - (LxWxH) 150Ox450x1800mm
made out of lmm C.R.Sheet. with adjustable
O4nos.selves having 16 SWG slotted
adjustable angle, Iron frame paint with
double coated red oxide & enamel paint.
Size: - (LxWxH) 15O0 x45O x l8Oomm
made out of 1mm C.R.Sheet. with adjustable
04nos.se1ves having 16 SWG slotted
adjustable ang1e, Iron frame paint with
double coated red oxide & enamel pdl\ /Lf,
NLIPAJZ/{ Y>
IN DUSTRIAL
9
09
18
18
2-<
\
r",
'
,rniryril'{lifqlf r,,
AN IPATNA ]- -
OFFICE OF THE PRINCIPAL, INDUSTzuAL TRAINING INSTITUTE,
NEAR I(ENDRl\'A VIDYALAYA.B
H
A WAN
IPATNA,
D
IST -I<ALAHANDI (ODISHA) PIN-76600],
Phone No. 06670-230494(Ofiice) Email: itibhawanipatna@gmail.com
N" I.hS5nrBPr
Dated
AS:
\.Q-'
\E
T]NDBR THE NATIONAL SHOPPING PROCBDURE
Sealed Qr.rotations are invited from repuled
Manufacturers/Authorized
Dealers/Distributorsl Suppliers/Govt.Organizations/DGS&D Rate contract holdels having valid
VAITTIN/PAN Registration for supply and installalion of Toois, Equipments, and Machineries
ol leputed make to LT.L,Bharvanipatna, Near Kendriya Vidyalaya At/P.O-Bhawan\ratna,
Dist.-Kalahandi, PIN-766001, Odisha under the Directorate of Technical Educatjon & Training,
Odisha, Cuttack..
of Quotation documents cor.rtaining the details of iterns (Schedule wise) with
specification, tentative qriantity, terms and conditioirs will be available I(alahandi distlict website.
'fhe documents can be downloaded from the website' rvr'v.kalahandi. nic. in"./Quotation aud can be
A complete
set
subrnitted alor,g wiri-r the EMD in the shape
ol Bank draft
dr
awn in favour of the Plincipal, ITI,
Bhawanipatna" pa1'able at Bhalyanipatna, State Banl< of India in a sealed packets by speed
or can be dropped in tl.re Tender box placed at I.T.l..Bhawanipalna,
"Quotation for T.&.E., ScheduleNo.-" Iatest by 15'11.13 up to 3,00PM. The
post/registered post
superscribing
same
will
be opened at 11.30
A.M on 15.11.13. The Authority reserves
the right to accept/ reject any
part or all Bids/Quotatir:ns without assigning any reason thereof.
lnstitr
'.
.lZsL /21 &atu'-t3
Crtq, k T^d^?*/o- N/Ise Wcd €-- 'r4',IrFe/
aLtr'^'l lt (-l^r- ca^ce/v<A @.dd'J-+a
n-*1
A,n*
Mec^^
a
\.'t,
'
,,r*rJffi'
4c