Govt. Industrial Training Institute, Pataudi Road Rewari,
Rewari - 123401
(Ph. : 01274- 253299) e-mail:- rewari.giti@gmail.com
TENDER FORM
Tender No. 1
Govt. ITI Rewari/Store/2015-16
Dated:-17/02/2016
Cost of Tender Form
The Payment for Tender Document Fee Rs. 1000/(Rupees Five Hundred Only) (Non refundable) and
eService Fee Rs. 1000/- (Rupees one thousand
only) (Non refundable) can be made by eligible
bidders / contractors online directly through Debit
Cards & Internet Banking Accounts.
Last date and time for receipt of application for Tender : --
Dated 24.02.2016 (04:00 PM)
Date and Time of Opening of Tender:-
Dated 24.02.2016 (5:00 PM in the office of
Principal Govt. ITI Rewari)
Amount to be deposited as E.M.D. :-
The Payment for EMD Rs. 60,000/- (Rupees Sixty
Thousand only) can be made online directly
through RTGS / NEFT and the bidder would remit
the funds at least T + 1 working day (Transaction +
One working day) in advance to the last day and
make the payment via RTGS / NEFT to the
beneficiary account number as mentioned in the
challan.
Govt. I.T.I. Rewari
NOTICE INVITING TENDERS
Sr. Name of work
No.
Earnest
Money
1
60,000/- 24.02.2016
(Up to 04:00PM)
Tool Machinery &
Equipment’s,
Furniture
Expiry Date &
Time of Bid
Preparation &
Submission
1. For Full details visit web site https://haryanaeprocurement.gov.in
PRINCIPAL
Govt. Industrial Training Institute
Rewari
DEATIL NOTICE INVITING TENDER
e-Tender is invited for purchase of below mentioned items in single stage two cover system i.e.
Request for Pre-Qualification/Technical Bid (online Bid under PQQ/ Technical Envelope) and Request for Financial
Bid (comprising of price bid Proposal under online available Commercial Envelope):-
Sr. Name of Items
No
1.
Tool Macinery &
Equipments,
Furniture
EMD to be
deposited
by Bidder
60000/-
Tender Document
Fee & eService Fee
(Rs.)
Start Date &
Time of Bid
Preparation &
Submission
Expiry Date &
Time of Bid
Preparation &
Submmission
1000/- + 1000/- =
17.02.2016
24.02.2016
2000/-
(04:00 PM)
(Up to 04:00
PM)
Under this process, the Pre-qualification/ Technical online bid Application as well as online Price Bid shall be invited
at single stage under two covers i.e. PQQ/Technical & Commercial Envelope. Eligibility and qualification of the
Applicant will be first examined based on the details submitted online under first cover (PQQ or Technical) with
respect to eligibility and qualification criteria prescribed in this Tender document. The Price Bid under the second
cover shall be opened for only those Applicants whose PQQ/ Technical Applications are responsive to eligibility and
qualifications requirements as per Tender document.
1. The payment for Tender Document Fee and e-Service Fee shall be made by eligible bidders online directly
through Debit Cards & Internet Banking Accounts and the payment for EMD can be made online directly
through RTGS/NEFT or OTC Please refer to ‘Online Payment Guideline’ available at the Single e-Procurement
portal of GoH (Govt. of Haryana) and also mentioned under the TenderDocument.
2. Intending bidders will be mandatorily required to online sign-up (create user account) on the website
https://haryanaeprocurement.gov.in to be eligible to participate in the e-Tender.He/She will be required to
make online payment of Rs.60,000/- towards EMD fee in due course of time i.e. between 17.02.2016 upto
23.02.2016. The intended bidder fails to pay EMD fee under the stipulated time frame shall not be allow to
submit his/her bids for the respective event/Tenders.
3. The interested bidders must remit the funds at least T+1 working day (Transaction + One Day) in advance i.e. on
or before 23.02.2016; and make payment via RTGS/NEFT or OTC to the beneficiary account number specified
under the online generated challan. The intended bidder/Agency thereafter will be able to successfully verify
their payment online, and submit their bids on or before the expiry date & time of the respective
events/Tenders at https://haryanaeprocurement.gov.in.
The interested bidders shall have to pay mandatorily e-Service fee (under document fee – Non refundable) of
Rs.1000/- (Rupee One Thousand Only) online by using the service of secure electronic gateway. The secure
electronic payments gateway is an online interface between bidders & online payment authorization networks.
The Payment for document fee/ e-Service fee can be made by eligible bidders online directly through Debit
Cards & Internet Banking.
The interested bidders must remit the funds at least T+1 working day (Transaction + One Day) in advance before
the expiry date & time of the respective events. And make payment via RTGS/NEFT to the beneficiary account
number specified under the online generated challan.
The Bidders can submit their tender documents (Online) as per the dates mentioned in the key dates:Key Dates
Sr. No.
Department Stage
1
Bidder's Stage
Tender Document
Download and Bid
Preparation/Submission
Start date and
time
17.02.2016
04:00 PM
Expiry date and
time
24.02.2016
(Up to 04:00 PM)
2
Technical Bid Opening
24.02.2016 16:00 Hrs.
3
Financial Bid Opening
24.02.2016 16:00 Hrs.
Important Note:
1) The Applicants/bidders have to complete ‘Application/Bid Preparation & Submission’ stage on scheduled
time as mentioned above. If any Applicant/bidder failed to complete his/her aforesaid stage in the
stipulated online time schedule for this stage, his/her Application/bid status will be considered as
‘Applications/bids not submitted’.
2) Applicant/Bidder must confirm & check his/her Application/bid status after completion of his/her all
activities for e-bidding.
3) Applicant/Bidder can rework on his/her bids even after completion of ‘Application/Bid Preparation &
submission stage’ (Application/Bidder Stage), subject to the condition that the rework must take place
during the stipulated time frame of the Applicant/Bidder Stage.
Instructions to bidder on Electronic Tendering System
These conditions will over-rule the conditions stated in the tender documents, wherever relevant and applicable.
1.
Registration of bidders on e-Procurement Portal:-
All the bidders intending to participate in the tenders process online are required to get registered on the centralized
e - Procurement Portal i.e. https://haryanaeprocurement.gov.in. Please visit the website for more details.
2.
Obtaining a Digital Certificate:
2.1
The Bids submitted online should be encrypted and signed electronically with a Digital Certificate to
establish the identity of the bidder bidding online. These Digital Certificates are issued by an Approved Certifying
Authority, by the Controller of Certifying Authorities, Government of India.
2.2
A Digital Certificate is issued upon receipt of mandatory identity (i.e. Applicant’s PAN Card) and
Address proofs and verification form duly attested by the Bank Manager / Post Master / Gazetted Officer. Only upon
the receipt of the required documents, a digital certificate can be issued. For more details please visit the website –
https://haryanaeprocurement.gov.in.
2.3
The bidders may obtain Class-II or III digital signature certificate from any Certifying Authority or Sub-
certifying Authority authorized by the Controller of Certifying Authorities or may obtain information and application
format and documents required for the issue of digital certificate from.
2.4
The bidder must ensure that he/she comply by the online available important guidelines at the portal
https://haryanaeprocurement.gov.in for Digital Signature Certificate (DSC) including the e-Token carrying DSCs.
M/s Nextenders (India) Pvt. Ltd.
O/o. DS&D Haryana,
SCO – 09, IInd Floor,
Sector – 16,
Panchkula – 134108
E - mail: Chandigarh@nextenders.com
Help Desk: 0172 – 2582008-09, 2618292 and 1800-180-2097 (Toll Free Number)
2.4
Bid for a particular tender must be submitted online using the digital certificate
(Encryption &
Signing), which is used to encrypt and sign the data during the stage of bid preparation. In case, during the process of a
particular tender, the user loses his digital certificate (due to virus attack, hardware problem, operating system or
any other problem) he will not be able to submit the bid online. Hence, the users are advised to keep a backup of the
certificate and also keep the copies at safe place under proper security (for its use in case of emergencies).
2.5 In case of online tendering, if the digital certificate issued to the authorized user of a firm is used for signing
and submitting a bid, it will be considered equivalent to a no-objection certificate/power of attorney /lawful authorization
to that User. The firm has to authorize a specific individual through an authorization certificate signed by all partners to use
the digital certificate as per Indian Information Technology Act 2000. Unless the certificates are revoked, it will be assumed
to represent adequate authority of the user to bid on behalf of the firm in the department tenders as per Information
Technology Act 2000. The digital signature of this authorized user will be binding on the firm.
2.6 In case of any change in the authorization, it shall be the responsibility of management / partners of the
firm to inform the certifying authority about the change and to obtain the digital signatures of the new person / user
on behalf of the firm / company. The procedure for application of a digital certificate however will remain the same
for the new user.
2.7
The same procedure holds true for the authorized users in a private/Public limited company. In this case, the
authorization certificate will have to be signed by the directors of the company.
3
Opening of an Electronic Payment Account:
For purchasing the tender documents online, bidders are required to pay the tender documents fees online
using the electronic payments gateway service shall be integrated with the system very soon till then it will be
submitted manually. For online payments guidelines, please refer to the Home page of the e-tendering Portal
https://haryanaeprocurement.gov.in.
4
Pre-requisites for online bidding:
In order to operate on the electronic tender management system, a user’s machine is required to be set up.
A help file on system setup/Pre-requisite can be obtained from Nextenders (India) Pvt. Ltd. or downloaded from the
home page of the website - https://haryanaeprocurement.gov.in.. The link for downloading required java applet &
DC setup are also available on the Home page of the e-tendering Portal.
5
Online Viewing of Detailed Notice Inviting Tenders:
The bidders can view the detailed N.I.T and the time schedule (Key Dates) for all the tenders floated through
the single portal eProcurement system on the Home Page at https://haryanaeprocurement.gov.in.
6
Download of Tender Documents:
The tender documents can be downloaded free of cost from the eProcurement portal
https://haryanaeprocurement.gov.in
7
Key Dates:
The bidders are strictly advised to follow dates and times as indicated in the online Notice Inviting Tenders.
The date and time shall be binding on all bidders. All online activities are time tracked and the system enforces time
locks that ensure that no activity or transaction can take place outside the start and end dates and the time of the
stage as defined in the online Notice Inviting Tenders.
8 Online Payment of Tender Document Fee, eService fee & EMD fees &Bid Preparation & Submission (PQQ/
Technical & Commercial/Price Bid):
8.1 Online Payment of Tender Document Fee + e-Service fee:
The online payment for Tender document fee, eService Fee & EMD can be done using the secure
electronic payment gateway. The Payment for Tender Document Fee and eService Fee shall be made by bidders/
Vendors online directly through Debit Cards & Internet Banking Accounts and the Payment for EMD shall be made
online directly through RTGS / NEFT & OTC.
The secure electronic payments gateway is an online interface between contractors and Debit card / online payment
authorization networks.
8.2
PREPARATION & SUBMISSION Of online APPLICATIONS/BIDS:
(i)
Detailed
Tender
documents
may
be
downloaded
from
e-procurement
website
(https://haryanaeprocurement.gov.in) from 17.02.2016 (05:00 PM.) and tender mandatorily be submitted
online following the instruction appearing on the screen.
(ii) Scan copy of Documents to be submitted/uploaded for Prequalification or Technical bid under
online PQQ/ Technical Envelope: The required documents (refer to DNIT) shall be prepared and
scanned in different file formats (in PDF /JPEG/MS WORD format such that file size is not exceed more
than 10 MB) and uploaded during the on-line submission of PQQ or Technical Envelope.
A. Only Electronic Form (Refer Tender document).
FINANCIAL or Price Bid PROPOSAL shall be submitted mandatorily online under Commercial
Envelope and original not to be submitted manually)
NOTE:(A)
Bidders participating in online tenders shall check the validity of his/her Digital Signature Certificate before
participating in the online Tenders at the portal https://haryanaeprocurement.gov.in.
(B)
For help manual please refer to the ‘Home Page’ of the e-Procurement
https://haryanaeprocurement.gov.in, and click on the available link ‘How to...?’ to download the file.
website
at
In the first instance, the online payment details of tender document fee+e-Service and EMD &
PQQ/Technical Envelope shall be opened. Henceforth financial bid quoted against each of the item by the
shortlisted bidder/ Agency wherever required shall be opened online in the presence of such bidders/ Agency who
either themselves or through their representatives choose to be present.
The bidder can submit online their bids as per the dates mentioned in the schedule/Key Dates above.
(Online Payment Guideline)
Guideline for Online Payments at e-Procurement Portal of Government of
Haryana
Post registration, bidder shall proceed for bidding by using both his digital certificates (one each for
encryption and signing) & Password. Bidder shall proceed to select the event/Tenders he is interested in. On
the respective Department’s page in the e-Procurement portal, the Bidder would have following options to
make payment for tender document fee & EMD:
A. Debit Card
B. Net Banking
C. RTGS/NEFT
Operative Procedures for Bidder Payments
A) Debit Card
The procedure for paying through Debit Card will be as follows.
(i) Bidder selects Debit Card option in e-Procurement portal.
(ii) The e-Procurement portal displays the amount and the card charges to be paid by bidder. The portal also
displays the total amount to be paid by the bidder.
(iii) Bidder clicks on “Continue” button
(iv) The e-Procurement portal takes the bidder to Debit Card payment gateway screen.
(v) Bidder enters card credentials and confirms payment
(vi) The gateway verifies the credentials and confirms with “successful” or “failure” message, which is
confirmed back to e-Procurement portal.
(vii) The page is automatically routed back to e-Procurement portal
(viii) The status of the payment is displayed as “successful” in e-Procurement portal. The e-Procurement
portal also generates a receipt for all successful transactions. The bidder can take a print out of the same,
(ix) The e-Procurement portal allows Bidder to process another payment attempt in case payments are not
successful for previous attempt.
B) Net Banking
The procedure for paying through Net Banking will be as follows.
(i) Bidder selects Net Banking option in e-Procurement portal.
(ii) The e-Procurement portal displays the amount to be paid by bidder.
(iii) Bidder clicks on “Continue” button
(iv) The e-Procurement portal takes the bidder to Net Banking payment gateway screen displaying list of
Banks
(v) Bidder chooses his / her Bank
(vi) The Net Banking gateway redirects Bidder to the Net Banking page of the selected Bank
(vii) Bidder enters his account credentials and confirms payment
(viii) The Bank verifies the credentials and confirms with “successful” or “failure” message to the Net
Banking gateway which is confirmed back to e-Procurement portal.
(ix) The page is automatically routed back to e-Procurement portal
(x) The status of the payment is displayed as “successful” in e-Procurement portal.
The e-Procurement portal also generates a receipt for all successful transactions. The bidder can take a print
out of the same.
(xi) The e-Procurement portal allows Bidder to process another payment attempt in case payments are not
successful for previous attempt.
C) RTGS/ NEFT/OTC
The bidder shall have the option to make the EMD payment via RTGS/ NEFT/OTC. Using this module,
bidder would be able to pay from their existing Bank account through RTGS/NEFT. This would offer a wide
reach for more than 90,000 bank branches and would enable the bidder to make the payment from almost
any bank branch across India.
I. Bidder shall log into the client e-procurement portal using user id and password as per existing process and
selects the RTGS/NEFT payment option.
ii. Upon doing so, the e-procurement portal shall generate a pre-filled challan. The challan will have all the
details that is required by the bidder to make RTGS-NEFT payment.
iii. Each challan shall therefore include the following details that will be pre-populated:









Beneficiary account no: (unique alphanumeric code for e-tendering)
Beneficiary IFSC Code:
Amount:
Beneficiary bank branch:
Beneficiary name:
iv. The Bidder shall be required to take a print of this challan and make the RTGS/NEFT on the basis of the
details printed on the challan.
v. The bidder would remit the funds at least T + 1 day (Transaction + One day) in advance to the last day and
make the payment via RTGS / NEFT to the beneficiary account number as mentioned in the challan.
vi. Post making the payment, the bidder would login to the e-Tendering portal and go to the payment page.
On clicking the RTGS / NEFT mode of payment, there would be a link for real time validation. On clicking the
same, system would do auto validation of the payment made.
List of Net banking banks
1. Allahabad Bank
2. Axis Bank
3. Bank of Bahrain and Kuwait
4. Bank of Baroda
5. Bank of India
6. Bank of Maharashtra
7. Canara Bank
8. City Union Bank
9. Central Bank of India
10. Catholic Syrian Bank
11. Corporation Bank
12. Deutsche Bank
13. Development Credit Bank
14. Dhanlaxmi Bank
15. Federal Bank
16. HDFC Bank
17. ICICI Bank
18. IDBI Bank
19. Indian Bank
20. Indian Overseas Bank
21. Indusind Bank
22. ING Vysya Bank 23. J and K Bank
24. Karnataka Bank
25. Kotak Mahindra Bank
26. Karur Vysys Bank
27. Punjab National Bank
28. Oriental Bank of Commerce
29. South Indian Bank
30. Standard Chartered Bank
31. State Bank Of Bikaner and Jaipur
32. State Bank of Hyderabad
33. State Bank of India
34. State Bank of Mysore
35. State Bank of Travancore
36. State Bank Of Patiala
37. Tamilnadu Mercantile Bank
38. Union Bank of India
39. United Bank of India
40. Vijay Bank
41. Yes Bank
For making payment through Demand Draft against the online Challan generated for OTC:
The intended bidders are required to draw demand draft in favour of below furnished details.
Sr No.
1
Account title
GOH E PROC EMD ESCROW AC
DSND HITD
The bids shall be submitted online in two separate envelopes:
 Envelope 1: Technical Bid
The bidders shall upload the required eligibility & technical documents online in the Technical Bid.
 Envelope 2: Commercial Bid
The bidders shall quote the prices in price bid format under Commercial Bid. The Change in
Specification / Brand Name is Strictly Prohibited.
PRINCIPAL
Govt. Industrial Training Institute
Rewari
MACHINIST
Sr.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Name of Items with specification
29
Steel Rule 30cm graduated both in english metric units (OMEGA/CRYSTAL/SHARP)
Outside spring caliper 150mm (STATUS/VACADO/BHARAT)
Inside spring caliper 150mm (STATUS/VACADO/BHARAT)
Hermaphrodite caliper 150mm (STATUS/VACADO/BHARAT)
Divider spring 150mm (STATUS/VACADO/BHARAT)
Centre punch 100mm (STATUS/VACADO/BHARAT)
Hammer ball pen 500gm (TAPARIA/AMBIKA/AMBITEC)
Cold chisel flat 25x200mm (AMBIKA/NATRAJ)
File flat bastard 300mm (JK) with wooden handle
File flat second cut 250mm (JK) with wooden handle
File flat smooth 250mm (JK) with wooden handle
Engineer screw driver (TAPARIA/AMBIKA/AMBITEC)
Combination plier 150mm (TAPARIA/AMBIKA/AMBITEC)
Safety glasses (BECO/MUSKAN/ZOOM)
Vernier gear tooth caliper (MITUTOYO)
Teliscopic gauge 13mm to 300mm (MITUTOYO/INSIZE)
Limit plug gauge 5mm to 25mm by 2.5mm (MITUTOYO/HG) should be as per ANSI/ASME
B89.1.6 standards
Ring gauge 5mm to 25mm by 2.5mm (Go & No Go) (MITUTOYO/HG) should be as per IS, BS,
DIN and American Standards
Taper gauge M.T. No. 1,2,3,4 & 5 (MITUTOYO/HG/BHARAT)
Planer gauge standard size (MITUTOYO/SHARS/EZ) Range : 1/4" - 6-1/4" with extension rods
Magnifying glass 75mm (ISO/BIS)
Single angle cutter 63X18X45degree RHxBORE 22mm (IT,PTC,BHARAT)
Single angle cutter 63X18X45degree LHxBORE 22mm (IT,PTC,BHARAT)
Single angle cutter 63X18X60degree RHxBORE 27mm (IT,PTC,BHARAT)
Single angle cutter 63X18X60degree LHxBORE 27mm (IT,PTC,BHARAT)
Slitting saw cutter dia 75X3XBORE27mm (IT,PTC,BHARAT)
Slitting saw cutter dia 100X6XBORE27mm (IT,PTC,BHARAT)
Parallel shunk and mill cutter dia10 and dia16 are (double fluted) dia20mm, dia25mm (four
fluted) (IT,PTC,BHARAT)
T-Slot cutter with parallel shunk dia11.5X8mm width X dia of shunk dia8mm (IT,PTC,BHARAT)
30
D type form milling cutter (involutes form 2 module 20degree pressure angle) (IT,PTC,BHARAT)
17
18
19
20
21
22
23
24
25
26
27
28
TURNER
Sr.
No.
31
Caliper out side spring joint 150 mm (STATUS/BHARAT)
32
Caliper inside spring joint 150 mm (STATUS/BHARAT)
33
Caliper odd-leg firm joint 150 mm (STATUS/BHARAT)
34
Steel Rule 150 mm 1 No (CRYSTAL/OMEGA/SGHARP)
Name of Items with specification
35
Scriber 150mm x 3 mm (STATUS/BHARAT)
36
Hammer ball pein 250 gm with handle (TAPARIA/AMBIKA/AMBITEC)
37
Centre punch 100 mm. (STATUS/BHARAT)
38
Prick punch 100 mm (STATUS/BHARAT)
39
Divider spring joint 150 mm (STATUS/BHARAT)
40
Safety goggles clear glass (Good quality) (WELDSTER/ZOOM)
41
Work bench 240 x 120x 90cm high (ISO/BIS)
42
Marking table (CI) 120 x 120 (LUTHRA)
43
Bench vice 125 mm jaw (AMBIKA/LION/JET) Cast iron made
44
Vee-Block 75 and 125 mm with clamp (STATUS/BHARAT)
45
Hammer ball pein 750 gm with handle (TAPARIA/AMBIKA/AMBITEC)
46
Chisel cold flat 20 x 150 mm (TAPARIA/AMBIKA/AMBITEC)
47
Hammer copper/brass 500 gm with handle (TAPARIA/AMBIKA/AMBITEC)
48
File flat 250 mm 2nd cut (JK) With wooden handle
49
File half round 250 mm 2nd cut (JK) With wooden handle
50
File round 250 mm smooth (JK) With wooden handle
51
File half round 150 mm smooth (JK) With wooden handle
52
Screw Driver 200 & 300 blade heavy duty (TAPARIA/AMBIKA/AMBITEC)
53
Spanner double ended 6 mm to 21 mm (TAPARIA/AMBIKA/AMBITEC)
54
Spanner adjustable 200 mm (TAPARIA/AMBIKA/AMBITEC)
55
Pliers flat nose 150 mm side cutting (TAPARIA/AMBIKA/AMBITEC)
56
Caliper transfer inside 150 mm (TAPARIA/AMBIKA/AMBITEC)
57
Micrometer Outside 0 to 1” Reading 0.0001” (MITUTOYO JAPAN)
58
Micrometer Outside 50to 75 mm Reading 0.01 mm (MITUTOYO JAPAN)
59
Micrometer Inside up to 25 mm Reading 0.01 mm (MITUTOYO JAPAN)
60
Micrometer Inside up to 50 to 150 mm reading 0.01 mm (MITUTOYO JAPAN)
61
Depth Gauge Micrometer 0 to 150 mm Reading 0.01 mm (MITUTOYO JAPAN)
62
Dial Vernier Caliper with metric 200 mm reading 0.05 mm (MITUTOYO JAPAN)
63
Vernier Micrometer 0 - 25 mm o/s LC 0.001mm (MITUTOYO JAPAN)
64
Vernier Micrometer 0 inch to 1 inch. Outside Reading 0.0001 inch (MITUTOYO JAPAN)
65
Feeler Gauge 100 mm blade metric set (STATUS/BHARAT)
66
Try Square 150 blade (STATUS/BHARAT)
67
Magnifying Glass 75 mm dia. (WELDSTER/ZOOM)
68
Plain Ring and Plug Gauge 12 to 50 mm by 1mm (MITUTOYO/REMS/HG) with
inspection/calibration certificate
69
Wheel Dresser Diamond ( inserted-0.75 or 1 Carat ) (STATUS/BHARAT)
70
71
Screw Thread micrometer interchangeable (MITUTOYO JAPAN)
Morse Taper Plug & Ring Gauge no. 0 to 7 MT (MITUTOYO JAPAN/REMS)
72
Slip Gauge metric set ( 87 pieces in a Box ) (MITUTOYO JAPAN/HG/PRECISE)
73
Tap & Die B.A. No. 0 to 10 in a box (TOTEM/HUMMA)
74
Tap & Die B.S.F. up to 1 inch (TOTEM/HUMMA)
75
Tap & Die B.S.W. up to 1 inch (TOTEM/HUMMA)
76
Reamer machine straight flute 6 to 25 mm (PTC/ADDISON/HSS)
77
Reamer Adjustable 10 to 20 mm (BHARAT/STATUS)
78
Oil Can ½ pint ( pressure feed system ) (AMBIKA/PRIMA/AMBITEC)
79
Tool Maker’s button (ISO/BIS)
80
Combination Drill A-2.5 and A-1 (IT/ADDISON/HSS)
81
Machine Vice 100 mm jaw ( For Drill Machine ) (LION/APEX/JET)
82
Chalk Board on mobile stand (ISO/BIS) size : 4' * 3' on tripod stand
83
Spare Grinding Wheel Ajax type for carbide tool (ISO/BIS)
84
Hand Chaser M-12 & M-16 ( External ) (JMD/ISO)
85
Hand Chaser M-12 & M-16 (Internal ) (JMD/ISO)
86
Revolving Centrer ( to suit Lathe tailstock ) (STATUS/BHARAT)
87
Thread Plug Gauge M-20 & M-21 (MITUTOYO JAPAN/HG)
88
Thread Ring Gauge M-20 & M-21 (MITUTOYO JAPAN/HG)
89
Machine Chase M-12TO m-21 (Std. Series) to suit on (ISO/BIS)
90
Coventry Die head (TACO)
91
Magnetic Chuck 150 mm dia.( Circular type ) (STATUS/BHARAT)
92
Lathe Mandrels (Diff. Types) (BHARAT/LUTHRA)
93
Conventry Type Die Head ( Self opening ) (TACO)
94
Collapsible Tap with attachment (ISO/BIS)
95
Combination Drill (IT/ADDISON/HSS)
96
Fire Extinguisher and buckets (ISI MARK)
97
Bore dial gauge stems – 12 to 35 mm, 35 to 65 mm., dial gauge indicator of 0.01 accuracy.
(MITUTOYO/INSIZE)
RAC
Sr.
No.
98
99
100
101
102
103
104
Split phase induction motor ¼ hp, 230 V (CROMPTON/ISO/BIS)
Capacitor start induction motor ½ Hp, 230 V (CROMPTON)
AC 3 Phase motor, 400/50 Hz 2 Hp (CROMPTON)
Star delta starter 2 Hp (BENTEX/ISO/BIS)
Auto Transformer starter 3 hp (VOLTEX/ISO)
D.O.L Starter 2 Hp (NIDHI/BENTEX)
Three/four door refrigerator 300L carrying with HC R-600a (GODREJ/LG)
105
Duct able split A.C 1.5 ton with R134a or R-22 reciprocating compressor (SIDWAL/BLUE STAR)
106
107
Cassette Air conditioner 4500 kcal/hr (SIDWAL/BLUE STAR)
Rotary hermetic compressor 2 Ton (HIGHLY/SAMSUNG)
108
CAR AC tutorial model (ISO/BIS) Closed type CAR AC tutorial working unit with facility to view
the internal working, fitted with Crompton make motor
Name of Items with specification
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
Sr.
File flat rough double cut 200mm (JK) with wooden handle
File, half round, fine double cut, length 150mm (JK) with wooden handle
File, round, fine double cut length 150mm (JK) with wooden handle
File flat, fine double cut, length 150mm (JK) with wooden handle
File square, fine double cut, length 150mm (JK) with wooden handle
File triangular fine double cut, length 150mm (JK) with wooden handle
Try square 150 mm (STATUS/BHARAT)
Divider spring joint length 150mm (STATUS/BHARAT)
Caliper spring joint in side length 150mm (STATUS/BHARAT/VACADO)
Caliper, odd leg, spring joint length 150mm (STATUS/BHARAT/VACADO)
Hammer ball pain 220 gms (TAPARIA/AMBIKA/AMBITEC)
Engineers rule 300mm long (OMEGA/CRYSTAL/SHARP)
Tape measuring 10m graduation in mm (FREEMAN/VENUS)
Pliers long nose 200 mm (TAPARIA/AMBIKA/AMBITEC)
Pliers flat nose 150mm (TAPARIA/AMBIKA/AMBITEC)
Tweezers 10 cm (ISO/BIS)
Surface Gauge universal 150 mm (STATUS/BHARAT/VACADO)
Bench vice 300mm jaw (ISO/BIS)
Anvil 100X200mm (ISO/BIS) 50KG WEIGHT with hardie hole
Tin smith 400mm (ISO/BIS)
Tenon saw 250 mm (ISO/BIS)
Rawal plug tool 6 mm (JET)
K.W. meter 0 -1 K w (DENKO)
Fire buckets 10 Litre (ABC/ISO/BIS)
D.E spanner 6-32 mm (TAPARIA/AMBIKA/AMBITEC)
Ring spanner 6-32 mm (TAPARIA/AMBIKA/AMBITEC)
Diagonal cutter 15 cm (TAPARIA/AMBIKA/AMBITEC)
Service Oscillator (ISO/BIS) 30MHz RF Oscillator in-built AM/FM Signal
C.R.O Single beam 5 MHZ (HTC)
C.R.O Dual trace/ Double beam 60 MHZ (HTC)
A.F.O Oscillators (ISO/BIS) 200KHz
Pressure gauge Digital type diameter 63mm (ISO/BIS)
Puller 3 legged with flexible arm 300mm (TAPARIA/AMBIKA/AMBITEC)
Tap set with matching drills 3 mm to 16mm (HUMMA/HALO)(IT/JK)
Tap set with matching drills ¼’’ to 5/8’’ (HUMMA/HALO)(IT/JK)
Heating kit with infrared bulb (200 w capacity) (ISO/BIS)
Plumbing hammer weight 200 gm (TAPARIA/AMBIKA/AMBITEC)
Engineers square 150mm with 5’ tolerance (STATUS/BHARAT)
Digital thermometer [Treated as consumable] Graduated disc analogy type (ISO/BIS)
Temperature &Humidity recorder Capacity to record 24 hrs record (ISO/BIS)
Instrumentation screw driver set 100mm (TAPARIA)
Digital weighing machine 100kg (ISO/BIS) Commercial Platform Type
TPES
Name of Items with specification
No.
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
Connecting screwdriver 100 mm (TAPARIA/AMBIKA/AMBITEC)
Soldering iron 25 W. 240 V. (JK/TONI)
Soldering Iron Changeable bits 10 W (JK/TONI)
De- soldering pump (ISO/BIS)
Steel measuring tape-3 m (ISO/BIS/FREEMAN)
Crimping tool (pliers) (Jainson) upto 6mm2
Magneto spanner set (ISO/BIS)
File flat 200mm bastard (JK) with wooden handle
File flat 200mm second cut (JK) with wooden handle
File flat 200mm smooth (JK) with wooden handle
100mm flat pliers (TAPARIA/AMBIKA/AMBITEC)
100mm round Nose pliers (TAPARIA/AMBIKA/AMBITEC)
Scriber straight 150mm (STATUS/BHARAT)
Hammer ball pen 0.5Kg (TAPARIA/AMBIKA/AMBITEC)
Cold chisel 20mm (TAPARIA/NATRAJ/JET)
Scissors 200mm (ISO/BIS)
Handsaw 450mm (ISO/BIS/JOLLY/AMBIKA)
CRO Dual Trace 20 MHz (component testing facilities) (HTC)
Battery Charger 0-12V /2 Amp (ISO/BIS)
Dimmer state, 3 Amps (ISO/BIS)
Analog Component Trainer (ISO/BIS)
Power Supply - Fixed 12,-12, 5 V DC ;Function generator - square wave - fixed frequency; Data
switch - 4; Output indicators - 4; Pulsar one with two debounced output ; logic probe to detect
high & Low level; 1 digit seven segment display; All discrete components
Op Amp trainer (ISO/BIS)
Digital and Analog Bread Board Trainer (ISO/BIS)
Unique Solder less large size; 3 Terminal strips with 1920 tie points and 5 distribution strips with
500 tie points; Total 2420 Tie points
POWER ELECTRONICS TRAINER with at least 6 no’s of onboard applications (ISO/BIS)
Power supply requirement : 230V AC, 50 Hz.
Built in Regulated Power supply : 0-15V DC/100 mA continuously variable; 0-40V DC/100 mA
continuously variable
Following parts provided on Single PCB with connecting terminals.
TRIAC - BT136
UJT - 2N2647
SCR - BT 151
All parts are soldered on single PCB with complete circuit diagram screen Printed.
Electronic circuit simulation software with 6 user licenses (ISO/BIS)
DSO Digital storage oscilloscope ( colour) (HTC)
SMD Soldering & De soldering Station with necessary accessories (PLUTO/)
DOL starter (ISO/BIS)
AC motor ¼ HP (ISO/BIS)
Seven segment DPM 0-20V DC (ISO/BIS)
LCD based DPM 0-2A DC (ISO/BIS)
Power Electronics Trainer along with triggering circuit (ISO/BIS)
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
Isolation Transformer (ISO/BIS)
Three phase variac Variable Auto Transformer (ISO/BIS)
Programmable power supply 0-30 V, 2 A (ISO/BIS)
Single phase Inverter 1 KVA,3KVA with batteries (HITACHI/DELTA/MICROTEK)
Clip On meter (ISO/BIS)
Microcontroller trainer kits (8051) along with programming software and applications (ISO/BIS)
3 phase inverter 2 KVA (HITACHI/DELTA/MICROTEK)
Discharge tester (ISO/BIS)
Inverter trainer 500VA • (ISO/BIS)
Auto transformer (ISO/BIS)
1 phase UPS Online 3 KVA, 1 KVA (each) (HITACHI/DELTA/MICROTEK)
3 phase UPS 2 KVA (ISO/BIS) (HHITACHI/DELTA/MICROTEK)
MOSFET chopper trainer (ISO/BIS)
Step up chopper trainer kit (ISO/BIS)
DC shunt motor 1HP with 3 point starter (ISO/BIS)
Tachometer (ISO/BIS)
3 phase induction motor 1Hp with DOL starter (ISO/BIS)
5 hp squirrel cage induction motor with star-delta starter (ISO/BIS)
DC drive trainer with 1hp motor using phase control method (ISO/BIS)
DC drive trainer with 1hp motor using SCR chopper circuit (ISO/BIS)
Programmable DC drive with motor (ISO/BIS)
Solar panel based Inverter 500VA (ISO/BIS)
VVVF drive trainer with 1 hp 3 phase motor Control Desk (ISO/BIS)
AC drive (Siemens Micro master 420) with AC motor 1hp (ISO/BIS)
PLC Systems with digital I/P, O/P modules and software PLC Trainer (ISO/BIS)
Solenoid 24 V AC (ISO/BIS)
Lamp 24 V AC (ISO/BIS)
AC power supply 24 V, 50 Hz, 2 A (ISO/BIS)
Electronic Pneumatics trainer (ISO/BIS)
Servo Motor drive Trainer (ISO/BIS)
Sensor trainer Kit – various field sensors and actuators (industrial grade switches,push
button,pilot lamps,proximity sensors,thermocouples,RTDs,load cells,strain gauge, LVDT, opto
switches, smoke detector,level switches,solenoid valves, reed relays,hall
sensors,techogenerator,low amp contactors etc. (ISO/BIS)
PAINTER
Sr.
No.
214
215
216
217
218
219
220
Name of Items with specification
Rule wooden (size 24 inch) (consumable) (NATRAJ)
Divider steel 150 mm (KASON)
Plumb bob 2 oz (STANDEY)
Brush softener 25 mm (consumable) (VINTAGE/ISO/BIS)
Brush stenciling (consumable) (NAKEDZ/ISO/BIS)
Brush writing (consumable) (NAKEDZ/ISO/BIS)
Brush Flat wall 50 mm (consumable) (VINTAGE/ISO/BIS)
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
Brush Can paint (consumable) (VINTAGE/ISO/BIS)
Brush varnish 25 mm. (consumable) (VINTAGE/ISO/BIS)
Brush distemper 25 mm (consumable) (ARJUN/KABAWAT/ISO/BIS)
Brush round 9 mm. Paint or varnish (consumable) (ARJUN/KABAWAT/ISO/BIS)
Brush Hog Hair Fitch (consumable) (BRIGHT/ISO/BIS)
Brush Flat 12 mm. Varnish (consumable) (VINTAGE/ISO/BIS)
Brush Dusting (consumable) (SUNIL/KABAWAT/ISO/BIS)
Brush White Wash (consumable) (BURJER/ISO/BIS)
Knife Put Glazier (consumable) (MORAKNIFE/ISO/BIS)
Knife Chisel (MORAKNIFE/KRISHNA/ISO/BIS)
Knife Stopping (ZENFOAM/ISO/BIS)
Knife Hacking (DUBOND/ISO/BIS)
Knife Palette (consumable) (DUBOND/ISO/BIS)
Scraper (DUBOND/ISO/BIS)
Strainer paint (consumable) (SAI/ISO/BIS)
Pliers Insulated (TAPARIA/AMBIKA/AMBITEC)
Pincer (TAPARIA/AMBIKA/AMBITEC)
Screw Driver 200 mm (TAPARIA/AMBIKA/AMBITEC)
Working Bench 240 cm x 120 cm x 75 cm (ISO/BIS)
Bench Vice 125 mm. Jaw (ISO/BIS)
Stainless Steel Rule 48” (SHARP/CRYSTAL/ISO/BIS)
Porcelain Basin 450 (ISO/BIS)
Fire Extinguisher (ABC/ISO/BIS)
Fire Buckets with stand (ABC/ISO/BIS)
Drawing Desk (ISO/BIS)
Chalk board with case (ISO/BIS)
Pneumatic chippers (ISO/BIS)
Orbital wire brushes (ISO/BIS)
Portable Electrical Drill Machine 12mm capacity (BOSC)
Portable hand sander machine (ISO/BIS)
Scaffold (TAPARIA/ISO/BIS)
Try Square 150 mm (STATUS/BHARAT)
Scriber (ISO/BIS)
Sliding T – Bevel (ISO/BIS)
Marking Gauge (ISO/BIS)
Wing Compass (ISO/BIS)
Hand Saw 450 mm (KURL-ON/ISO/BIS)
Tannin Saw 300 mm to 375 mm (KURL-ON/ISO/BIS)
Jib saw portable (KURL-ON/ISO/BIS)
Smoothing Plane (KURL-ON/ISO/BIS)
Mallet (KURL-ON/ISO/BIS)
Carpenter’ Hammer (JK/TAPARIA)
Chisel Firmer 6 mm, 25 mm set (MORAKNIFE/ISO/BIS)
Chisel Mortise 9 mm (ZENFOAM/ISO/BIS)
Trying Plane (ZENFOAM/ISO/BIS)
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
Claw hammer (JK/TAPARIA)
Ball peen hammer 250 gm (AMBIKA/SAGAR)
Oil stone 150x50x25xmm (consumable) (ISO/BIS)
Aerograph (Air Brush) (ISO/BIS)
Carpenter Vice 225 mm (AEROGRAPH/ISO/BIS)
Pallets (consumable) (SURYA/ISO/BIS)
Beam Compass (Stencil cutting) (SURYA/ISO/BIS)
Stencil Knife (consumable) (MORAKNIFE/ISO/BIS)
Blow Lamp 500 ml (SHINE/ISO/BIS)
Steps ladder (wooden) (NANDAN/ISO/BIS)
Trestle Painter with stools (NANDAN/ISO/BIS)
Combs (Steel) (ANDIS/BABA/ISO/BIS)
Flatter Roller (consumable) (ANDIS/BABA/ISO/BIS)
Portable Electrical hand grinder (MEHTA YSHA/ISO/BIS)
Disc grinder set (KAINDL/ISO/BIS)
Goggles (consumable) (MUKAN/ISO/BIS)
Gloves (consumable) (DELTA/ISO/BIS)
Digital balance (1- 2) Kg capacity (ISO/BIS)
Weight per liter cup (LABIN/ISO/BIS)
Ford cup No. 4 for viscosity measurement (FORD/ISO/BIS)
Stop Watch (TITAN/ISO/BIS)
Spraying Mask (consumable) (ABC/ISO/BIS)
Lay Brush (consumable) (NAKEDZ/ISO/BIS)
Electric oven for paint baking (SURYA/ISO/BIS)
Face Mask & Respirator (consumable) (ABC/ISO/BIS)
DFT gauge machine (digital) (ABC/ISO/BIS)
292
Gloss meter (digital) (ISO/BIS) (PRESTOSTAN TEST)
Display : 4 Digits Backlit LCD
Measuring Geometry : 60 Degrees
Range: 0.1 ~ 200 Gloss Units
Accuracy: ± 1.0 GU
Resolution: 0.1 GU
Repeatability: ± 0.5 GU
Measuring Area: 7 x 14 mm（Ellipse）
Data Memorized: 254 Groups
Working Condition: Temperature: 0 ～ 40 °C Humidity: < 85 %
293
Scratch hardness tester (ISO/BIS) (PRESTOSTAN TEST)
Used in testing paints, varnishes, and lacquers & similar products.
· Weights : 500g, 100g, 200g
· Capacity : 1 Kg
294
295
Resistively – Meter (ABC/ISO/BIS)
Hegman gauge (ISO/BIS)
Sr.
COPA
Name of Items with specification
No.
296
297
Wi–Fi Router / 24 Port Switch With Wireless
Connectivity option (D-LINK)
Laser Printer Monochrome A4 Size (Max Print Resolution 1200 x 600 dpi ; Duty Cycle 10000
Pages; Print Speed A4: 16 pages per minutes) (CANON/HP)
298
Network Monochrome Laser Printer A4 Size (ANY REPUTED BRAND)
299
Optical Scanner (Flatbed A4) (CANON/HP/BROTHER)
300
Digital Web Cam (High Resolution) (25 MEGA PIXEL) (ISO/BIS)
301
DVD or Blu-Ray Writer (INTERNAL BLU-RAY WRITER) (LG)
302
LCD Projector with matte(antiglare) screen (3500 ANSI LUMENS DLP PROJECTOR WITH 6' *
4' SCREEN) (LG/SONY)
303
2KVA online UPS (MICROTEK/LUMINUS)
304
Cable crimping tool (RJ-45) (ISO/BIS)
305
Standalone Hard Disks 500 GB or Higher (WD/SEAGATE/HITACHI)
306
Network Rack (DYNAMIC/COMRACK)
307
Barcode Scanner (TVS)
308
Digital Multimeters, 3.5 digit handheld type. (HTC) with backlight
309
Standard Screw Driver Set (AMBIKA/PYE)
310
USB Mini Dongle for Bluetooth devices Connection (ISO/BIS)
311
Bluetooth headphone &mic set (Frequency Range 20 - 20000 Hz; Impedance 16 ohm;
Sensitivity/Sound Pressure Level 120 db/Mw)
312
External Solid State Hard Disk 1 TB (SAMSUNG)
313
LAN Setup
314
MS Office 2010 (professional) or the latest version available at the time of procurement
315
Antivirus for – clients / workstations in profile with validity of an year or more which should be
renewed upon expiry (QUICKHEAL/PRODOT)
316
Open Office or equivalent.
317
GIMP / Irfan View Image editor or equivalent
318
LINUX OS (REDHAT)
319
WYSIWYG Web Authoring tool- Dreamweaver or Opensource tools likeKompozer, FrontPageor
similar tools along with FTP tools for ex.Filezillaetc.
320
Tally ERP 9 or Latest
321
E Commerce Simulation Software
322
Web Server : Any HTTP Web server / XAMPP or any other similar server
323
Hand Held Vacuum cleaner (SKYLINE/EUREKA FORBES)
324
Split type Air conditioners 1.5 tons (VOLTAS/LG/ISO)
325
White Board. SIZE: 4' *3' MAGNETIC
PLUMBER
Sr.
No.
326
327
Name of Items with specification
Rule Steel 300 mm both in inch and mm (CRYSTAL/SHARP/OMEGA)
Rule Wooden 4 fold, 600 mm (SHARP/OMEGA/METRO)
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
Hacksaw Frame adjustable for 250 to 300 mm (JOLLY)
Scriber 200 mm (STATUS/BHARAT/VACADO)
Centre punch 100 mm (STATUS/BHARAT/VACADO)
Chisel Cold, flat 20 mmX200mm (AMBITEC/AMBIKA/JET)
Hammer ball pein 800 grams (AMBIKA/TAPARIA/AMBITEC)
Hammer ball pein 500 grams (AMBIKA/TAPARIA/AMBITEC)
File flat rough 300 mm (JK) with wooden handle
Level spirit wooden 300 mm (FREEMAN) metal/acrylic made
Plumb bob 50 grams (JET)
Trowel C-125-I S: 6013 (ISO/BIS) Length 5"
Stillson wrench 200 & 350 mm (TAPARIA/AMBIKA/AMBITEC)
Screw Driver 250 mm (AMBIKA/TAPARIA/AMBITEC)
Wooden Mallet small I S: 2022 (ISO/BIS)
Cutting pliers 200mm I S : 3650 (AMBIKA/TAPARIA/AMBITEC)
Steel tape (5m) (FREEMAN)
Surface plate 400 X400 mm Grade I(LUTHRA)
Marking Table 900X600X900mm high (LUTHRA)
‘V’ Blocks with clamps 80/7-63A IS 2949 (BHARAT/STATUS)
Combination 200 mm (TAPARIA/AMBIKA/AMBITEC)
Scribing Block, Universal, 300 mm (BHARAT/STATUS)
Hand Vice, Jaw 50 mm (JET)
File Flat, Smooth 200 mm (JK) with wooden handle
File Half Round, Rough 300 mm (JK) with wooden handle
File, Square, rough 250 mm (JK) with wooden handle
File, Square, Smooth 200 mm (JK) with wooden handle
File Triangular Rough 250 mm (JK) with wooden handle
File Flat Rasp 250 mm (JK) with wooden handle
File Triangular Smooth 200 mm (JK) with wooden handle
Chisel Cold Flat 20 mmX300mm (AMBIKA/TAPARIA/AMBITEC)
Chisel Cross Cut 6X150 mm I S-402 (JET)
Chisel Round e 3X150 mm I S -402 (JET)
Chisel Diamond Point 6X150mm (JET)
Tap and Die to cut B.S.F. , B.S.W. and metric threads of sizes 6 to M-12
(TOTEM/ADDISON/HUMMA)
Screw Pitch gauge to cover above threads 10 BLADE (ISO/BIS)
Punch , Letter 100mm Set is made from hardened and tempered steel. Square heads, knurled
grip (STATUS/BHARAT/VACADO)
Punch , Number Hardened steel suitable to punch soft metals and mild steel. Number punch set
of 0 to 9, of face 4mm & length 100 mm (STATUS/BHARAT/VACADO)
Saw Plumber 300mm (AMBIKA/AMBITEC/JOLLY)
Spanner monkey up to 50mm (TAPARIA/AMBITEC/AMBKIA)
stove melting solder standard size (ISO/BIS)
Cutter ,Pipe, wheel type 6mm to 25mm (INDER)
Oil stone 150X50X25mm (CNBI)
Soldering Iron , Copper , Bit , Fire heated ,Hatched , Straight , 500 grams (JMD)
370
371
372
373
374
375
376
377
Snip Straight 250mm (JET/9Jack)
Snip bend 250mm (JET/9Jack)
Try square 200mm (BHARAT/JET)
Inside Caliper 150mm (STATUS/BHARAT/VACADO)
Caliper outside 150mm (STATUS/BHARAT/VACADO)
Odd leg calliper 200mm (STATUS/BHARAT/VACADO)
Ten saw 300mm with wooden handle (ISO/BIS)
Hand Saw. 600 MM with wooden handle (JOLLY/APOLO)
378
Chisel Mortice seasoned Wooden or plastic handle with
ferrule (top & bottom), blade - high carbon steel
width of blade 6,10,15,mm (3 no’s) (ISO/BIS)
379
Chisel Firmer(Bevel edged) seasoned hard
sheesham Wooden or plastic handle with ferrule(top &
bottom), blade - high carbon steel width of blade
6,10,15,20 and 25mm (5 no’s) (ISO/BIS)
380
381
Mallet Medium IS: 2922 wooden mallet (ISO/BIS)
Jack plane 350 MM BLADE 50 MM (AMBIKA/ANANT)
382
Gas Welding with oxygen acetylene cylinder; Double CYLINDER TROLLEY (1), CYLINDER
(OXYGEN 1), ACETYLENE (1) PRESSURE REGULATOR 2
STAGE Oxygen 1 Acetylene 1 Hose Pipe (Rubber
( 10 Mt.) Black (Oxygen), Red (Acetylene) Hose
Clamps (3/4"or 1") Cylinder Spindle key ( 2 )
(Oxygen & Acetylene) Blow Pipe Torch (HP, LP)
copper zzle 1 Gas cutter with NRB (1 ) (ISO/BIS)
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
Goggles pair welder 100 mm (ZOOM/BECO)
Brush Steel Wire 150X 50 mm (ISO/BIS)
Table welding 1200X 750 mm with fire bricks
top and stand (ISO/BIS)
Pliers combination, 200 mm (TAPARIA/AMBIKA/AMBITEC)
Blow lamp 500 mili litre (PRABHAT)
washer cutter standard size (ISO/BIS)
Mirror 100X150 mm (ISO/BIS)
Scribing gauge 200 MM (STATUS/BHARAT)
soil pot with brush Standard Size (ISO/BIS)
Pot- Hook (ISO/BIS)
D. E. Spanners 7X8, 10X11, 13X1. 7, 19X2.2, 24X27 IS:2028 (AMBIKA/AMBITEC/TAPARIA)
branch gimlets Standard Size (PIONEER/ARROW)
bending spring standard size (ISO/BIS)
plumber laddle standard size (ISO/BIS) made of metal with curved spout tip
tool caulking of S 300 mm (ISO/BIS)
Plumbers’ metal melting pot 10 kg (ISO/BIS)
399
Pipe stock and dies complete with stocks,bushing , bushing holders, Taps and wrenches sizes
covered, to suit pipes of bore dia 6,8,10,20,25,32,40,&50mm (HUMMA/HALO) COMPLETE
STOCK & DIES SET WITH SUITABLE TAPS UPTO 50MM
400
Pipe vice to grip up to 77 mm is -2587 (APEX/LION/JET)
403
404
405
Stillson pattern pipe wrenches 450 mm to take pipe up to 52 mm dia I s -4003
(AMBIKA/AMBITEC/TAPARIA)
Stillson pattern pipe wrenches 300mm to take pipe 20 mm to 32mm
(AMBIKA/AMBITEC/TAPARIA)
Chain :pipe wrench 90mm -650 is 4123 (AMBIKA/AMBITEC/TAPARIA)
Adjustable, spanner, A-375, IS- 6149 (AMBIKA/AMBITEC/TAPARIA)
Anvil 50 or 63 kg. IS- 510 (REMS)
406
Pipe bender, manually operated 6mm to 15 mm (ISO/BIS) On stand weighing 35-40 kg (approx)
407
408
409
410
411
Leg vice, 75mm jaw on Stand IS -2588 (APEX/LION/JET)
Hand drill 6mm capacity with drill chuck (Electric) (BOSCH/BLACK & DECKER)
Drill Twist (straight shank ) 3mm to 6mm (IT/JK)
Portable forge ,450mmwith hand blower (ISO/BIS) 18" forge dia with suitable blower
Flat smithy tong 300 mm (ISO/BIS)
working bench 2400x1200x750mm with 4 vice 125 mm jaws (ISO/BIS) cast iron vice
(AMBIKA/AMBITEC/JET)
Bath tub small size (ISO/BIS)
Wash Basin (16”X14”X10”)Equivalent metric (ISO/BIS)
Water Heater 10 litres (ISI MARK)
water closest (european type p) complete with over head cistern (ISO/BIS)
water closest (indian type) complete with over head cistern (ISO/BIS)
Urinal wall type complete with automatic system (ISO/BIS)
Water meter 15 mm (ISO/BIS)
black board with casel/ white clr(6x4)'foot (ROLEX/ISO/BIS)
401
402
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
fire extinguisher 5 Kg specification 1.6mm,hydraulic test pressure 30 bar, temprature range 0-60
degree celcius, jet range 4mm max. period of discharge 25 sec, min discharge quantity 85%
(ABC) (ISI MARK)
fire bucketswith stand standard size ,with 4 buckets, (ABC/ISO/BIS)
HAMMERING DRILL MACHINE 20mm, 230v/50HZ,580W,0-850pm,2.6a,2.2kgs, drill size steel
10mm,wood 30mm, concrete 20mm (ISO/BIS) (BOSCH/BLACK & DECKER)
Electric PPR pipe welding machine 15mm to 25mm diameter (ISO/BIS)
electric pump, 1hp singal phase (CROMPTON)
D.E. PEDESTAL GRINDER WITH TWO WHEELS 200MM ROUGH AND SMOOTH (ISO/BIS)
Pedestal weight 35-40kg (approx)
Hydraulic pressure machine for testing leakage in GI pipe fittings etc. (1/2" to 2") check of GI
pipe fitting (ISO/BIS)
sight rail and bonning rod standard size (ISO/BIS) wooden made
Rachet pipe die 15 mm to 32 mm (HUMMA/HALO/FOREMAN)
Bench drilling machine with chuck and key upto 15mm capacity (ISO/BIS) fitted with hindustan
make three phase motor and reversible switch
Double face hammers 800 gm (TAPARIA/AMBIKA/AMBITEC)
dormat , pickle, spade,girmle standard size (ISO/BIS)
pipe bender(hydraulic type) upto (1/2" to 2") diameter pipes jack capacity 13-1/4" minimum 223/4 maximum includes dies 1/2",3/4",1",1-1/4",1-1/ 2" and 2" with handle 17-5/8" (ISO/BIS)
434
Solar water heater system Capacity 100lt. Temperature of solar suystem is upto 60degree C.
The of tubes are ten in numbers. The water Circulatuon from tank to SWHS and vice versa to
the washrooms through gravity. The heater is 2kw tank is of stainless steel with 1mm thick and
50mm puf insulation with cpacity 100lt. collectore area is 1.5 meterper 100 ltr.. (ISO/BIS)
435
Ring guage 15 mm,20mm,25mm,32mm (ADDISON/HG/MILHARD)
Mechanic Motor Vehicle trade
Sr.
No.
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
Name of Items with specification
Allen Key set of 12 pieces (2mm to 14mm) (TAPARIA/AMBIKA/AMBITEC)
Caliper inside 15 cm Spring (BHARAT/STATUS/SAGAR)
Calipers outside 15 cm spring (BHARAT/STATUS/SAGAR)
Center Punch 10 mm. Dia. x 100 mm. (BHARAT/STATUS/SAGAR)
Dividers 15 cm Spring (BHARAT/STATUS/SAGAR)
Electrician Screw Driver 250mm ( TAPARIA/AMBIKA/AMBITEC)
Hammer ball peen 0.5 kg with handle (TAPARIA/AMBIKA/AMBITEC)
Hands file 20 cm. Second cut flat (JK) WITH WOODEN HANDLE
Philips Screw Driver set of 5 pieces (100 mm to 300 mm) (TAPARIA/AMBIKA/AMBITEC)
Pliers combination 20 cm. (TAPARIA/AMBIKA/AMBITEC)
Screw driver 20cm.X 9mm. Blade (TAPARIA/AMBIKA/AMBITEC)
Screw driver 30 cm. X 9 mm. Blade (TAPARIA/AMBIKA/AMBITEC)
Scriber 15 cm ( SAGAR/BHARAT/STATUS)
Spanner D.E. set of 12 pieces (6mm to 32mm) (TAPARIA/AMBIKA/AMBITEC)
Spanner, ring set of 12 metric sizes 6 to 32 mm. (TAPARIA/AMBIKA/AMBITEC)
Spanners socket with speed handle, T-bar, ratchet and universal upto 32 mm set of 28 pieces
with box (TAPARIA/AMBIKA/AMBITEC)
Steel rule 30 cm inch and metric
Steel tool box with lock and key (folding type) 400x200x150 mm (
TAPARIA/AMBIKA/AMBITEC)
Wire cutter and stripper ( TAPARIA/AMBIKA/AMBITEC)
AC alternator slip ring puller ( TAPARIA/AMBIKA/AMBITEC)
Adjustable spanner (pipe wrench 350 mm) (TAPARIA/AMBIKA/AMBITEC)
Air blow gun with standard accessories ( ISO/BIS)
Air Brake Assembly WORKING MODEL
459
Air impact wrench with standard accessories 1/2" Air Impact wrench; 16MM Bolt Size
Capacity; 7000RPM Free speed; 340N-M max torque; Avg. air consumption 8 CFM; Required
air pressure 90psi; Air inlet 1/4"; Air hose (ID) 3/8"
Comes in a PVC Briefcase with standadr sockets, pin, oil pot etc.
460
Air ratchet with standard accessories
RPM: 160 (Free Speed)
Max. Torque: 50 ft/lb
Sound Level: 92 dB
Air Pressure : 90 Psi
Air Inlet: 1/4" (NPT)
Avg. CFm : 4
461
Allen Key set of 12 pieces (2mm to 14mm) (TAPARIA/AMBIKA/AMBITEC)
Square Drive : 1/2"
462
463
464
465
466
467
Alternator assembly used for LMV ( ISO/BIS)
Ammeter 300A/ 60A DC with external shunt (DENKO/VOLTEC)
Angle plate adjustable 250x150x175 ( ISO/BIS)
Angle plate size 200x100x200mm ( BHARAT/STATUS/SAGAR)
Anti theft device ( ISO/BIS)
Anvil 50 Kgs with Stand (REMS)
468
Auto Electrical test bench Drive 2 HP Single phase motor, Power Supply 220 V 15A, Alternator
load 75 A-12, Starter Test Built-in DC Supply with Voltage Stabilizer, easy transportability, full
set of leads, separate digital meters for alternators/starter test
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
Battery –charger ( EXIDE/ISO)
Belt Tensioner gauge (OTC/JTC)
Blow Lamp 1 litre (PRABHAT)
Caliper inside 15 cm Spring (BHARAT/STATUS/SAGAR)
Calipers outside 15 cm spring (BHARAT/STATUS/SAGAR)
Car Jet washer with standard accessories (BOSCH)
Carburetor – Solex, Mikuny for dismantling and assembling (reconditioned) ( ISO/BIS)
Carburetor repair tool kit (ISO/BIS)
Chain Pulley Block-3 ton capacity without tripod stand (ISO/BIS)
Chisel 10 cm flat (TAPARIA/AMBIKA/AMBITEC)
Chisels cross cut 200 mm X 6mm (TAPARIA/AMBIKA/JET)
Circlip pliers Expanding and contracting type 15cm and 20cm each
(TAPARIA/AMBIKA/AMBITEC)
Clamps C 100mm ( BHARAT/STATUS/SAGAR)
Clamps C 150mm (BHARAT/STATUS/SAGAR)
Clamps C 200mm ( BHARAT/STATUS/SAGAR)
Cleaning tray 45x30 cm. ( ISO/BIS)
Coil spring compressor for suspension spring (ISO/BIS)
Compression testing gauge suitable for diesel Engine with standard accessories ( ISO/BIS)
Connecting rod alignment fixture ( ISO/BIS)
Constant Mesh Gear box with stand for Dismantling and assembly.
(TATA/ESCORT/MARUTI/ISO/BIS)
Copper bit soldering iron 0.25 Kg ( ISO/BIS)
Cut section Model of Mock layout of a motor car –electrical system working model WORKING
MODEL WITH COMPLETE VEHICLE WIRING WITH OUTPUT INDICATOR SUCH AS
HEADLIGHT/HORN ETC.
Cut section models of shock absorbers (Used) ( ISO/BIS)
Cut section of cross ply and radial tyres (Used) ( ISO/BIS)
Cut section working model of automatic transmission Gear box ( ISO/BIS)
Cut section working model of centrifugal clutch assembly. WORKING MODEL WITH
ATTACHED MOTOR
Cut section working model of Diaphragm clutch assembly. WORKING MODEL WITH
ATTACHED MOTOR
Cut section working model of Single plate clutch assembly. WORKING MODEL WITH
ATTACHED MOTOR
Cylinder bore gauge capacity 20 to 160 mm (50-150) ( MITUTOYO/INSIZE)
Cylinder liner- Dry & wet liner, press fit & slidefit liner (ISO/BIS)
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
DC Ohmmeter 0 to 300 Ohms, mid scales at 20 Ohms (AE/ISO/BIS)
Demonstration board of 2W Ignition system, ignition coil ( ISO/BIS)
Demonstration board of electronic Ignition system, ignition coil WORKING UNIT WITH ECM
INCORPORATED
Demonstration board of MPFI system WORKING UNIT WITH ECM INCORPORATED AND
MOVEMENT OF FUEL SHOULD BE DISPLAYED
Depth micrometer 0-25mm ( MITUTOYO)
Dial gauge type 1 Gr. A (complete with clamping devices and with magnetic stand) (
MITUTOYO)
Different type of Engine Bearing model ( ISO/BIS)
Different type of piston model ( ISO/BIS)
Disk brake with caliper assembly WORKING MODEL
Distributor –Duel advance type, reluctance type ( ISO/BIS)
Dividers 15 cm Spring (BHARAT/STATUS)
Drift Punch Copper 15 Cm ( ISO/BIS)
Drill point angle gauge ( ISO/BIS)
Drill twist 1.5 mm to 15 mm (various sizes) by 0.5 mm (IT/ADDISON)
Drum brake assembly WORKING MODEL
Electric Soldering Iron 230 V 60 watts 230 V 25 watts ( ISO/BIS)
Electric testing screw driver ( TAPARIA/AMBIKA/AMBITEC)
Engineer’s square 15 cm. Blade (BHARAT/STATUS)
Engineers stethoscope ( ISO/BIS)
Executive Auto Electrical tool kit (ISO/BIS)
Feeler gauge 20 blades (metric) (BHARAT/STATUS)
File flat 20 cm bastard ( JK)WITH WOODEN HANDLE
File, half round 20 cm second cut ( JK) WITH WOODEN HANDLE
File, Square 20 cm second cut (JK) WITH WOODEN HANDLE
File, Square 30 cm rough ( JK) WITH WOODEN HANDLE
File, triangular 15 cm second cut ( JK) WITH WOODEN HANDLE
Files assorted sizes and types including safe edge file (set of 20 Nos) (JK) WITH WOODEN
HANDLE
Flat File 25 cm second cut ( JK) WITH WOODEN HANDLE
Flat File 35 cm bastard ( JK) WITH WOODEN HANDLE
Front axle ( Rzeeppa Joint) with stand for Dismantling and assembly COMPLETE AXLE WITH
DIFFERENTIAL UNIT SHOULD BE PROVIDED
Fuel feed pump for diesel ( BOSCH/MICO)
Fuel injection pump (Diesel) inline (BOSCH/MICO)
Fuel injection pump dismantling tool kit ( ISO/BIS)
Fuel injection pump, VE pump / Distributor fuel rotary pump (DPC) pumps / along with special
tools and accessories. ( BOSCH/MICO)
Full floating axle and semi-floating axle assembly COMPLETE AXLE WITH DIFFERENTIAL
UNIT SHOULD BE PROVIDED
Functional/experiment model of different type of sensors. FIVE DIFFERENT SENSOR
WORKING ON BOARD
Garage stand
Gloves for Welding (Leather and Asbestos) ( ISO/BIS)
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
Glow plug tester
Granite surface plate 1600 x 1000 with stand and cover ( LUTHRA)
Grease Gun (TAPARIA/AMBIKA/AMBITEC)
Grease Gun heavy duty trolley type 10 kg capciaty ( TAPARIA/AMBIKA/AMBITEC)
Growler ( ISO/BIS)
Hacksaw frame adjustable 20-30 cm ( TAPARIA/AMBIKA/AMBITEC)
Hammer Ball Peen 0.75 Kg ( TAPARIA/AMBIKA/AMBITEC)
Hammer Chipping 0.25 Kg (TAPARIA/AMBIKA/AMBITEC)
Hammer copper 1 Kg with handle ( TAPARIA/AMBIKA/AMBITEC)
Hammer Mallet ( TAPARIA/AMBIKA/AMBITEC)
Hammer Plastic (TAPARIA/AMBIKA/AMBITEC)
Hand operated crimping tool (i) for crimping up to 4mm and (ii) for crimping up to 10mm
(JAINSON/ISO)
Hand reamers adjustable 10.5 to 11.25 mm, 11.25 to 12.75 mm, 12.75 to 14.25 mm and 14.25
to 15.75 mm (BHARAT/STATUS)
Hand Shear Universal 250mm ( ISO/BIS)
Hand vice – 37 mm (APEX/LION/ISO/BIS0
Hollow Punch set of seven pieces 6mm to 15mm (VENUS/AMBIKA/APOLLO/JK/ISO/BIS)
Horn and Horn relay (ISO/BIS)
Impact screw driver (JK/TAPARIA/AMBIKA/ISO/BIS)
Injector – Multi hole type, Pintle type (BOSCH/MICO)
Injector cleaning unit MIN. 4 TUBE BASED CLEANER
Injector testing set (Hand tester) (ISO/BIS)
Insulated Screw driver 20 cm x 9mm blade (TAPARIA/AMBIKA/AMBITEC0
Insulated Screw driver 30 cm x 9mm blade ( TAPARIA/AMBIKA/AMBITEC)
Left cut snips 250mm ( ISO/BIS)
Lifting jack screw type 3 ton, 5ton & 20 Ton capacity ISO/BIS
Magneto spanner set with 8 spanners JK/TAPARIA/AMBIKA/ISO/BIS
Magnifying glass 75mm ISO/BIS
Marking out table 90X60X90 cm.
Multimeter digital (HTC/SANWA)
Multi-point fuel injection pump (BOSCH/MICO)
Oil can 0.5/0.25 liter capacity ( TAPARIA/AMBIKA/AMBITEC)
Oil pump for dismantling and assembling. (ISO/BIS0
Oil Stone 15 cm x 5 cm x 2.5 cm (CNBI0
Oscilloscope 20MHz 9HTC)
Outside micrometer 0 to 25 mm (MITUTOYO)
Outside micrometer 25 to 50 mm (MITUTOYO)
Outside micrometer 50 to 75 mm (MITUTOYO)
Outside micrometer 75 to 100 mm (MITUTOYO)
Petrol nozzle ( ISO/BIS)
Philips Screw Driver set of 5 pieces (100 mm to 300 mm) (TAPARIA/AMBIKA/AMBITEC)
Pipe cutting tool (ISO/BIS)
Pipe flaring tool ( ISO/BIS)
Piston ring compressor ( ISO/BIS)
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
Piston Ring expander and remover. ( ISO/BIS)
Piston Ring groove cleaner. ( ISO/BIS)
Pliers combination 20 cm. ( TAPARIA/AMBIKA/AMBITEC)
Pliers flat nose 15 cm (TAPARIA/AMBIKA/AMBITEC)
Pliers round nose 15 cm (TAPARIA/AMBIKA/AMBITEC)
Pliers side cutting 15 cm (TAPARIA/AMBIKA/AMBITEC)
Portable electric drill Machine (BOSCH/BLACK & DECKER)
Prick Punch 15 cm ( SAGAR/BHARAT/STATUS)
Punch Letter 4mm (Number) (SAGAR/BHARAT/STATUS)
Radiator cut section-cross flow (ISO/BIS)
Radiator cut section-down flow (ISO/BIS)
Radiator pressure cap (ISO/BIS)
Rear axle full floating type with stand for Dismantling and assembly COMPLETE AXLE WITH
DIFFERENTIAL UNIT SHOULD BE PROVIDED
Right cut snips 250mm (TAPARIA/AMBIKA/APOLLO/VENUS/ISO/BIS)
Rivet sets snap and Dolly combined 3mm, 4mm, 6mm (JK/AMBIKA/ISO/BIS)
Scraper flat 25 cm (BHARAT/STATUS)
Scraper half round 25 cm (BHARAT/STATUS)
Scraper Triangular 25 cm (BHARAT/STATUS)
Scriber 15 cm ( BHARAT/STATUS)
Scriber with scribing black universal (BHARAT/STATUS)
Set of stock and dies – Metric (HUMMA/TOTEM/ISO)
Shear Tin Man’s 450 mm x 600mm (STATUS/ISO/BIS)
Sheet Metal Gauge (ISO/BIS)
Sher Tinmans 300mm ( ISO/BIS)
Soldering Copper Hatchet type 500gms (ISO/BIS0
Solid Parallels in pairs (Different size) in Metric ( BHARAT/STATUS)
Spanner Clyburn 15 cm (TAPARIA/AMBIKA/AMBITEC)
Spanner D.E. set of 12 pieces (6mm to 32mm) (TAPARIA/AMBIKA/AMBITEC)
Spanner T. flocks for screwing up and up-screwing inaccessible
Spanner, adjustable 15cm. ( TAPARIA/AMBIKA/AMBITEC)
Spanner, ring set of 12 metric sizes 6 to 32 mm. (TAPARIA/AMBIKA/AMBITEC)
Spanners socket with speed handle, T-bar, ratchet and universal upto
(TAPARIA/AMBIKA/AMBITEC0
Spark lighter ( CRYSTAL/ISO/BIS)
Spark plug spanner 14mm x 18mm x Size ( TAPARIA/AMBIKA/AMBITEC)
Starter motor axial type, pre-engagement type & Co-axial type (ISO/BIS)
Steel measuring tape 10 meter in a case ( VENUS/FREEMAN)
Steel rule 15 cm inch and metric ( OMEGA/CRYSTAL/SHARP)
Steel rule 30 cm inch and metric (OMEGA/CRYSTAL/SHARP)
Steering assembly - 1.Rack & pinion, 2.Worm & roller 3. Recirculating ball, 4.Power steering
COMPLETE ITEMS SHOULD BE PRESENTED AS A WORKING MODEL
Straight edge gauge 2 ft. (BHARAT/STATUS)
Straight edge gauge 4 ft. (BHARAT/STATUS)
Stud extractor set of 3 ( ISO/BIS)
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
Stud remover with socket handle (ISO/BIS)
Surface gauge with dial test indicator plunger type i.e. 0.01 mm (MITUTOYO)
Synchronous Gear box with stand for Dismantling and assembly. (ISO/BIS)
Tachometer (Counting type) ( LUTROUN/ISO/BIS)
Tandem master cylinder with booster ( ISO/BIS)
Taps and Dies complete sets BSF ( HUMMA/TOTEM/ISO)
Taps and wrenches - metric ( HUMMA/TOTEM/ISO)
Telescope gauge ( MITUTOYO/INSIZE)
Temperature gauge with sensor 0-100 deg c ( ISO/BIS)
Tester sparking plug ‘NEON’ Type (TAPARIA/AMBIKA/AMBITEC)
Thermostat (ISO/BIS)
Thread pitch gauge metric, BSW (BHARAT/STATUS)
Timing lighter ( ISO/BIS)
Toe-in, toe-out gauge (ISO/BIS)
Torque wrenches 5-35 Nm, 12-68 Nm & 50-225 Nm (TAPARIA/AMBIKA/AMBITEC)
Trammel 30 cm (BHARAT/STATUS)
Tread wear indicator (ISO/BIS)
Tubed tyre of car, trucks & motorcycle (ISO/BIS)
Tubeless tyre of cars & trucks (ISO/BIS)
Tubeless tyre repair kit (ISO/BIS)
Turbocharger cut sectional view (ISO/BIS)
Tyre & split rim wheel assembly ( ISO/BIS)
Tyre pressure gauge with holding nipple (ISO/BIS)
Universal puller for removing pulleys, bearings (TAPARIA/AMBIKA/AMBITEC)
V’ Block 75 x 38 mm pair with Clamps (BHARAT/STATUS)
Vacuum assisted hydraulics brake assembly with vacuum booster WORKING MODEL ON
STAND SHOULD BE PROVIDED WITH TYRE AND BOOSTER ARRANGEMENT
Vacuum gauge to read 0 to 760 mm of Hg. (ISO/BIS)
Valve Lifter (ISO/BIS)
Valve spring compressor universal. ( ISO/BIS)
vernier caliper 0-300 mm with least count 0.02mm (MITUTOYO)
Vice grip pliers (TAPARIA/AMBIKA/AMBITEC)
Water pump for dismantling and assembling (TATA/BHARAT/ISO/BIS)
Wheel cylinder (BOSCH/MICO)
Wiper motor assembly (ISO/BIS)
Wire Gauge (metric) (ISO/BIS)
Work bench 250 x 120 x 60 cm with 4 vices 12cm Jaw
Working Model of power windows COMPLETE DOOR UNIT IN WORKING CONDITION CUT
SECTIONED SHOUL BE PROVIDED
Working model of torque converter ( ISO/BIS)
4 Point relays ( ISO/BIS)
5 Point relays (ISO/BIS)
Air bag simulator RESUABLE AIR BAG SYSTEM SHOULD BE PRESENT AND BLAST
EFFECT SHOULD BE CLEARLY DEMONSTRATED
Air conditioned CRDI Vehicle in running condition -LMV
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
Air conditioning service Unit (Car) TROLLEY TYPE UNIT FOR SERVICING INCLUDING
RECOVERING REFRIGERANT SHOULD BE PROVIDED
Air conditioning trainer kit CLOSED TYPE CAR AC TUTORIAL WORKING UNIT WITH
FACILITY TO VIEW THE INTERNAL WORKING, FITTED WITH CROMPTON MAKE MOTOR
Arbor press hand operated 2 ton capacity ( ISO/BIS)
Automotive exhaust 5 gas analyzer (petrol & Diesel) or Diesel Smoke Meter (ISO/BIS)
Bench lever shears 250mm Blade x 3mm Capacity ( ISO/BIS)
Diesel Engine – CRDI - 4 stroke for Dismantling and assembling with swivelling stand (
ISO/BIS)
Diesel engine ( Running condition ) Stationary type (ISO/BIS)
Discrete Component Trainer / Basic Electronics Trainer ( ISO/BIS)
Drilling machine bench to drill up to 12mm dia along with accessories WITH REVERSIBLE
SWITCH AND 3PHASE MOTOR
Dual Magnetization Yoke : AC / HWDC, 230 VAC, 50Hz INPUT SUPPLY: 220V, 50HZ, 1
PHASE
INPUT CURRENT : 2A
DIST. ACROSS POLES: 0 TO 300MM
MAGNETIC FIELD: AC-CONSTANT LEVEL, DC-PULSED INFINITELY VARIABLE
DUTY CYCLE : 23% (3 SEC ON FOLLOWED BY 10 SEC OFF)
ACCESSORIES: DRY POWDER FILLED IN PUFFER BULB; TEST BLOCK; CARRYING CASE
Four stroke petrol engine with CNG setup-working condition
Gas Welding Table 1220mm x760mm
Grinding machine (general purpose) D.E. pedestal with 300 mm dia wheels rough and smooth
(ISO/BIS)
Hand operated Hydraulic press ( ISO/BIS)
Heavy Commercial vehicle type (without body on frame)
Hydraulic jack HI-LIFT type -3 ton capacity, and 5 Ton capacity ( ISO/BIS)
Liquid penetrant Inspection kit (ISO/BIS)
MPFI petrol engine with swiveling stand along with special tools for dismantling and assembling
(ISO/BIS)
Multi Scan Tool with oscilloscope INBUILT OSCILLOSCOPE SHOULD BE PRESENT
Petrol Engine(2-stroke) Motor Cycle/Scooter along with special tools and accessories
WORKING MODEL OF 2 STROKE ENGINE IS REQUIRED
Pipe Bending Machine (Hydraulic type) 12mm to 30mm ( ISO/BIS)
Pneumatic rivet gun with standard accessories 3/16" AIR HYDRAULIC RIVETER; AIR INLET:
1/4" BSP OR NPT; STROKE LENGTH: 9/16"; AIR HOSE (ID): 3/8"; AVG. AIR CONSUMPTION:
0.03CFM;
Spring tension tester ( ISO/BIS)
Tin smiths bench folder 600 x 1.6mm (ISO/BIS)
Transfer case with stand for Dismantling and assembly. ( ISO/BIS)
Trolley type portable air compressor single cylinder with 45 liters capacity Air tank, along with
accessories & with working pressure 6.5 kg/sq cm ( ISO/BIS)
Tube/ tyre vulcanizing machine (ISO/BIS)
Two post car lift – capacity 4000 kg
Tyer Changer Machine (ISO/BIS)
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
Ultrasonic Injection cleaning equipment ( ISO/BIS)
Welding plant Oxy-Acetylene complete TWO CYLINDERS TORCHES HOSE PIPE
REGULATORS KEY
Welding Transformer ( 150-300 Amps) ( ISO/BIS)
Wheel alignment Machine –computerised 3D
Wheel balancing machine
Working Condition of Diesel Engine – CRDI - 4 stroke Engine Assembly with fault simulation
board
Working Condition of Petrol MPFI Engine Assembly with fault simulation board
Gloves for Welding (Leather and Asbestos) ( ISO/BIS)
Hand rubber gloves tested for 5000 V ( ISO/BIS)
Hydrometer ( ISO/BIS)
Leather Apron ( ISO/BIS)
Safety goggles ( ISO/BIS)
Steel wire Brush 50mmx150mm ( ISO/BIS)
Draughtsman drawing instrument box ( ISO/BIS)
Set square celluloid 45⁰ (250 X 1.5 mm) (ISO/BIS)
Set square celluloid 30⁰-60⁰ (250 X 1.5 mm) (ISO/BIS)
Mini drafter ( ISO/BIS)
Drawing board (700mm x500 mm) ( PINE BOARD)
Draughtsman table ( PINE BOARD)
Draughtsman stool (ISO/BIS)
Laser Jet printer latest model Max Print Resolution 1200 x 600 dpi ; Duty Cycle 10000 Pages;
Print Speed A4: 16 pages per minutes
ELECTRICIAN
Sr.
No.
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
Name of Items with specification
Steel Tape, 15 m length (VENUS/FREEMAN) (13MM WIDE)
Plier Insulated, 150 mm (TAPARIA/AMBIKA/AMBITEC)
Plier Side Cutting, 150 mm (TAPARIA/AMBIKA/AMBITEC)
Screw Driver, 100 mm (TAPARIA/AMBIKA/AMBITEC)
Screw Driver, 150 mm (TAPARIA/AMBIKA/AMBITEC)
Electrician Connector, screw driver insulated handle thin stem, 100 mm
(TAPARIA/AMBIKA/AMBITEC)
Heavy Duty Screw Driver , 200 mm (TAPARIA/AMBIKA/AMBITEC)
Electrician Screw Driver thin stem insulated handle, 250 mm (TAPARIA/AMBIKA/AMBITEC)
Punch Centre , 150 mm X 9 mm (BHARAT/STATUS)
Knife Double Bladed Electrician (ISO/BIS)
Neon Tester (TAPARIA/AMBIKA/AMBITEC)
Steel Rule 300 mm (OMEGA/SHARP/CRYSTAL)
Hammer, cross peen with handle 1/4Lb (TAPARIA/AMBIKA/AMBITEC)
Hammer, ball peen With handle 1/4Lb ( TAPARIA/AMBIKA/AMBITEC)
Gimlet 6 mm. (PIONEER/ARROW)
Bradawl ( ISO/BIS)
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
Scriber (Knurled centre position ) (BHARAT/STATUS)
Pincer 150 mm (TAPARIA/AMBIKA/AMBITEC)
C- Clamp 200 mm, 150 mm and 100 mm (BHARAT/STATUS)
Spanner Adjustable 150 mm,300mm ( TAPARIA/AMBIKA/AMBITEC)
Blow lamp 0.5 ltr ( PRABHAT/ISO PRABHAT/ISO)
Melting Pot 1 KG CAPACITY OR ABOVE graphite
Ladel METAL FORMED WITH DRIPPING TIP aluminium
Chisel Cold firmer 25 mm X 200 mm ( TAPARIA/AMBIKA/AMBITEC)
Chisel 25 mm and 6 mm (TAPARIA/AMBIKA/AMBITEC/JET)
Hand Drill Machine ( APEX/JET/NIKE)
Portable Electric Drill Machine 6 mm capacity (BOSCH) walf hammer m/c 16mm capacity
Pillar Electric Drill Machine 12 mm capacity FITTED WITH 3PHASE MOTOR AND
REVERSIBLE SWITCH
Allen Key ( TAPARIA/AMBIKA/AMBITEC)
Oil Can 0.12 ltr (TAPARIA/AMBIKA/AMBITEC)
Grease Gun ( TAPARIA/AMBIKA/AMBITEC)
Out Side Micrometer ( MITUTOYO)
Motorised Bench Grinder 6" (ISO/BIS)
Rawl plug tool and bit ( JET/APEX/NIKE)
Pully Puller 3 legs 6'' (TAPARIA/AMBIKA/AMBITEC)
Bearing Puller 2 legs 4'' (TAPARIA/AMBIKA/AMBITEC)
Pipe vice 2" (TAPARIA/AMBITEC/JET)
Thermometer 0 to 100 deg Centigrade (ISO/BIS)
Scissors blade 150 mm ( ISO/BIS)
Crimping Tool (JAINSON/ISO)
Wire stripper 20 cm (TAPARIA/AMBIKA/AMBITEC)
Chisel Cold flat 12 mm (TAPARIA/AMBIKA/AMBITEC)
Mallet hard wood 0.50 kg ( ISO/BIS)
Hammer Extractor type 0.40 kg (JET/DIAMOND/ARROW)
Hacksaw frame 200 mm 300 mm adjustable (JOLLY/AMBIKA/AMBITEC)
Try Square 150 mm blade (BHARAT/STATUS)
Outside and Inside Divider Calliper (BHARAT/STATUS)
Pliers flat nose 150 mm ( TAPARIA/AMBIKA/AMBITEC)
Pliers round nose 100 mm (TAPARIA/AMBIKA/AMBITEC)
Tweezers 100 mm ( ISO/BIS)
Snip Straight & Bent 150 mm (JET/9JACK/AMBIKA)
D.E. metric Spanner (TAPARIA/AMBIKA/AMBITEC)
Drill hand brace ( JET/BICON/AMAN)
Drill S.S. Twist block 2 mm, 5 mm 6 mm set of 3 ( IT/ADDISION)
Plane, smoothing cutters 50 mm (AMBIKA/AMBITEC/ANANT)
Gauge, wire imperial (BHARAT/STATUS)
File flat 200 mm 2nd cut ( JK )WITH PVC HANDLE
File half round 200 mm 2nd cut (JK) WITH PVC HANDLE
File round 200 mm 2nd cut (JK) WITH PVC HANDLE
File flat 150 mm rough (JK) WITH PVC HANDLE
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
File flat 250 mm bastard ( JK) WITH PVC HANDLE
File flat 250 mm smooth (JK) WITH PVC HANDLE
File Rasp, half round 200 mm bastard (JK) WITH PVC HANDLE
Soldering Iron 25 watt, 65 watt, 125 watt (JK/ISO)
Copper bit soldering iron 0.25 kg. ( ISO/BIS)
Desoldering Pump gun (ISO/BIS)
Hand Vice 50 mm jaw (JET/NIKE/APEX)
Table Vice 100 mm jaw ( AMBIKA/AMBITEC/JET)
Pipe Cutter to cut pipes upto 5 cm. dia (INDER/FOREMAN0
Pipe Cutter to cut pipes above 5 cm dia (MOTORISED-BOSCH)
Stock and Die set for 20 mm to 50 mm G.I. pipe (EAGLE/HUMMA/HALO/TOTEM)
Stock and Dies conduit (EAGLE/HUMMA/HALO/TOTEM)
Ohm Meter; Series Type & Shunt Type (ISO/BIS)
Multi Meter (analog) 0 to 1000 M Ohms, 2.5 to 500 V (HTC)
Digital Multi Meter (HTC)
A.C. Voltmeter M.I. 0 –500V A.C PORTABLE METER IN ABS OR WOODEN BODY
Milli Voltmeter centre zero 100 – 0 – 100 m volt PORTABLE METER IN ABS OR WOODEN
BODY
D.C. Milli ammeter 0 -500m A PORTABLE METER IN ABS OR WOODEN BODY
Ammeter MC 0-5 A, 0- 25 A PORTABLE METER IN ABS OR WOODEN BODY
A.C. Ammeter M.I. 0-5A, 0-25 A PORTABLE METER IN ABS OR WOODEN BODY
Kilo Wattmeter 0-1-3 kw PORTABLE METER IN ABS OR WOODEN BODY
A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp (JAIPUR/POWERCONTROL)
Power Factor Meter PORTABLE METER IN ABS OR WOODEN BODY
Frequency Meter (AE/ISO)
Flux meter
Wheat Stone Bridge with galvanometer and battery (ISO/BIS)
Laboratory Type Induction Coil (ISO/BIS)
DC Power Supply 0-30V, 2 amp (ISO/BIS)
Rheostat (ISO/BIS)
0 -1 Ohm, 5 Amp
0 -10 Ohm, 5 Amp
0- 25 Ohm, 1 Amp
0- 300 Ohm, 1 Amp
1 Phase Variable Auto Transformer 2A (ISO/BIS)
Battery Charger ( ISO/BIS)
Hydrometer (ISO/BIS)
Miniature Breaker 16 amp ( Raw Material) (ISO/BIS)
Working Bench 2.5 m x 1.20 m x 0.75 m (ISO/BIS)
Fire Extinguisher CO2, 2 KG (ISO/BIS)
Fire Buckets (ISO/BIS)
Tachometer (ISO/BIS)
Current Transformer 415 Volt,50 Hz, CT Ratio 150 / 5 Amp, 5VA ( AE/ISO)
Potential Transformer 415 Volt,50Hz, PT Ratio 11KV/ 110V, 10VA ( AE/ISO)
Growler (ISO/BIS)
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
Tong Tester / Clamp Meter 0 – 100 amp. AC ( ISO/BIS)
Contactor & auxiliary contacts 3 phase, 440volt,
16amp (Raw Material) ( ISO/BIS)
Contactor & auxiliary contacts 3 phase, 440 volt, 32
amp. (Raw Material) (ISO/BIS)
Limit Switch (Raw Material) (ISO/BIS)
Rotary Switch 16 A (Raw Material) ( ISO/BIS)
Load Bank 5 KW( Lamp / heater Type) SUITABLE FOR SINGLE PHASE &THREE PHASE &
STAR-DELTA CONNECTIONS
Brake Test arrangement with two spring balance 0 to 25 kg rating
Knife Switch DPDT fitted with fuse terminals 16 amp (Raw Material)
Knife Switch TPDT fitted with fuse terminals 16 amp (Raw Material)
Voltage Stabiliser Input: 150 – 230 volt AC Output: 220 volt AC
3- point D.C. Starter
4- point D.C. Starter
Electrical Machine Trainer THE PRODUCT SHOULD BE OF ROHS COMPLIANT MAKE
Motor-Generator (AC to DC) THE PRODUCT SHOULD BE OF ROHS COMPLIANT MAKE
Used DC Generators-series, shunt and compound type for overhauling practice (Set of 3
Generators) THE PRODUCT SHOULD BE OF ROHS COMPLIANT MAKE
D.C. Shunt Generator with control panel,2.5 KW, 220V THE PRODUCT SHOULD BE OF
ROHS COMPLIANT MAKE
D.C. Compound Generator with control panel THE PRODUCT SHOULD BE OF ROHS
COMPLIANT MAKE
Diesel Generator Set with change over switch, over
current breaker and water-cooled with armature, star-delta connections AC 3 phase, 5 KVA, 240
volt CONTROL PANEL SHOULD BE SEPERATELY PROVIDED
DC Series Motor coupled with mechanical load 0.5 to 2 KW, 220 Volts THE PRODUCT
SHOULD BE OF ROHS COMPLIANT MAKE
DC Shunt Motor 2 to 2.5 KW, 220 volts THE PRODUCT SHOULD BE OF ROHS COMPLIANT
MAKE
DC compound Motor with starter and switch 2 to 2.5
KW ,220 volts
THE PRODUCT SHOULD BE OF ROHS COMPLIANT MAKE
Single phase Transformer, core type, air cooled 1 KVA , 240/415 V, 50 Hz DIGITAL METERING
SHOULD BE PROVIDED
Three phase transformer, shell type oil cooled with all mounting 3 KVA , 415/240 V, 50 Hz ,
(Delta/Star) THE PRODUCT SHOULD BE OF ROHS COMPLIANT MAKE
Oscilloscope Dual Trace, 30 MHZ HTC/SCIENTECH
Function Generator HTC/SCIENTECH
Discrete Component Trainer THE PRODUCT SHOULD BE OF ROHS COMPLIANT MAKE
Linear I.C. Trainer THE PRODUCT SHOULD BE OF ROHS COMPLIANT MAKE
Digital I.C. Trainer THE PRODUCT SHOULD BE OF ROHS COMPLIANT MAKE
Oil Testing Kit ( ISO/BIS)
Hygrometer
Cut out Relays :a. Reverse current (PIC/MINILEC/TECHNIKA)
b. Over current
(PIC/MINILEC/TECHNIKA)
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
c. Under voltage (PIC/MINILEC/TECHNIKA0
Starters for 2 to 5 H.P. A.C Motors :a. Resistance type starter
b. Direct on line Starter ( NIDHI/L&T/BENTEX)
c. Star Delta Starter- manual, semi-automatic and
automatic BENTEX/L&T
d. Auto Transformer type THE PRODUCT SHOULD BE OF ROHS COMPLIANT MAKE
Motor Generator(DC to AC) set THE PRODUCT SHOULD BE OF ROHS COMPLIANT MAKE
AC Squirrel Cage Motor with star delta starter and triple pole iron clad switch fuse. 2 to 3 HP, 3phase,400 volts, 50 cycles THE PRODUCT SHOULD BE OF ROHS COMPLIANT MAKE
AC phase-wound slip ring Motor with starter and switch 5 HP, 400 volts, 3-phase, 50 cycles
A.C. Series type Motor with mechanical load ¼ HP, 230V, 50 Hz THE PRODUCT SHOULD BE
OF ROHS COMPLIANT MAKE
Single Phase Capacitor Motor with starter switch 1 HP 230 volt 50 cycles
CROMPTON/KIRLOSKAR
Universal Motor with starter/switch 230 volt, 50 cycles ¼ HP (ISO/BIS)
Stepper Motor with Digital Controller THE PRODUCT SHOULD BE OF ROHS COMPLIANT
MAKE
Shaded Pole Motor (ISO/BIS)
Bath Impregnating COMPLETE UNIT WITH PROCESS TANK VARNISH TANK;
ARRANGEMENT FOR TIMED VACUUM AND PRESSURE SHOULD BE PROVIDED SO THAT
THE REQUIRED PROCESS CAN BE PERFORMED
THE PRODUCT SHOULD BE OF ROHS COMPLIANT MAKE
Oven Stove (ISO/BIS)
Synchronous motor 3 Phase, 3 HP, 415V, 50Hz, 4 Pole, with accessories. THE PRODUCT
SHOULD BE OF ROHS COMPLIANT MAKE
Lux meter (ISO/BIS)
Inverter- 1 KVA with 12 V Battery Input- 12 volt DC, Output- 220 volt AC (Without battery)
(MICROTECK/EXIDE)
Domestic Appliances
a. Electric Hot Plate 1500 watt ( ISO/BIS)
b. Electric Kettle, 1500 watts (ISO/BIS)
c. Electric Iron 1500 watts (BAJAJ/USHA/PHILIPS)
d. Immersion Heater 1500 watt e. A.C. Fan (ISO/BIS)
e. A.C. Fan (KHAITAN/USHA/ISO)
f. Geyser (Storage type) 15 ltr minimum ISI MARK
g. Mixture & Grinder (PHILIPHS)
Thyristor /IGBT controlled D.C. motor drive with tacho-generator feedback arrangement 1 HP
Thyristor/IGBT controlled A.C. motor drive with VVVF control 3 Phase
866
Pentium IV Computer or latest (Server- Linux), 2.8 GHz & above, 1 GB RAM, 80 GB HDD, DVD
Combo Drive, 15/17” Monitor, optical scroll mouse, multimedia key board, 32 bit LAN card with
UPP port, necessary Drivers, etc. CORE I3; 4GB RAM; 500 GB HDD; 18.5" TFT; WINDOWS
PRELOADED
DELL/ACER/HP
867
Ink jet/ laser printer MAX PRINT RESOLUTION 1200 X 600 DPI ; DUTY CYCLE 10000
PAGES; PRINT SPEED A4: 16 PAGES PER MINUTES
868
869
Motor Pump set 1 HP, 1 Phase, 240 V (CROMPTON/KIRLOSKAR)
Pin Type, shackle type & suspension type insulators (Raw Material) (ISO/BIS)
FURNITURE
Sr. No.
1
2
3
4
5
Name of items
Instructors table (GODREJ/BALKA)
Instructors chair (GODREJ/BALKA)
Lokers with 16 drawers standard size 2.5mX1.20mX0.5M
(GODREJ/BALKA)
Almirah 2.5mX1.20mX0.5M (GODREJ/BALKA)
Steel lockers with 8 drawers Metal rack (1800x1500x450mm) (GODREJ/BALKA)
6
Metal rack (1800X1500X450mm) (GODREJ/BALKA)
7
steel almirah(large) (78 x 36 x 19)" with lock and key (GODREJ/BALKA)
8
Pigeon hole cabinet : 20 compartments (GODREJ/BALKA)
We here by quote our rates for supply of following items and also agree to the Terms and Conditions mentioned
below in the tender form.
Signature of Tendered with seal.
Terms and Conditions:1. Tenders without earnest money shall not be accepted earnest money.
2.
The supplier will have to supply the material/ machinery within 15 days from the date of issue of
supply order failing which a penalty @ 1% per week maximum 5% will be imparted upon you.
3. Price Bid:a) The contract shall be for the full quantity as described above. Corrections, if any, shall be made
by crossing out, initialing, dating and re writing.
b) All duties, taxes and other levies payable on the raw material and components shall be included
in the total price.
c) Sales tax in connection with the sale shall be shown separately.
d) The rates quoted by the bidder shall be fixed for the duration of the contract and shall not be
subject to adjustment on any account.
e) The Price shall be quoted in Indian Rupees Only.
4. Normal Commercial warranty / guarantee shall be applicable to the supplied goods minimum one year
and as on applicable supplied good by manufacturer.
5. 90 % Payment will be released on satisfactory receipts/ acceptance of goods and 10% payment
will be made on installation and working of Items.
6.
7.
8.
9.
Rates quoted should be F.O.R. to Govt. ITI Rewari.
The complaint about the machinery will have to be attended within a week by the supplier.
Erection and Commissioning will be done by the party on their own expenses.
The legal jurisdiction will be Rewari
10. Firms must have ST/CST and TIN numbers.
11. PRINCIPAL GITI Rewari reserved rights to change any terms and conditions.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
The quantity may be increase or decrease.
The committee reserves the right to accept/reject the tender without assigning any reason.
All Tools, Equipments & Machinery should be as per ISI/ISO certified and Standard Make.
A) The goods would be evaluated for each item separately.
B) Sale/ Vat Tax in the connection with sale of good shall not be taken in to account evaluation.
The items costing above Rs. 30,000 Including Vat shall be procured after Department Sanction.
The Bidder Shall Supply the items as Mention in Tender as per Specification.
Rate shall be valid 31.03.2016.
Supplied Goods should be unused and new.
No Interest shall be payable on security amount.
On Site Installation if required.
22. Rate should be mentioned clearly with including all taxes and F.O.R. at above mentioned destination. The
rate quoted will be considered as inclusive of all taxes.
PRINCIPAL
Govt. Industrial Training Institute
Rewari
We undertake to abide by the above terms and conditions as mentioned by the society.
Signature of Tendered with seal.