2016
3
LIGHTING
CATALOG
2
table of
CONTENTS
INFORMATION
3 About illuminFx
4 Color Temperature
5 Beam Spread
7
8
10
11
12
OSLO/RIO CONTROL
Level Select
Color Select
Power Amplifiers
Color Select PLUS
Spectrum Select
3 information
from color temperature and beam spread to color
controls. Helpful guides to help you select the right
product for every project
UNDERWATER
14 Cabo
21 Manta Ray
INGRADE
Casper/Sydney
Tuscon
Billings
Aspen
43
45
46
47
49
50
52
53
54
55
LANDSCAPE
Ventura
Vineyard
Huron
Laredo
Eco
Corsica
Vienna
Madrid
Corsica
Tampa
6 oslo/rio color control
13 underwater
select your perfect single color/ or RGB color
changing control from color select to spectrum select.
RIO / OSLO
29
37
39
40
6-12
wide array of IP68 underwater lighting
FLEX
SlimFlex
NeoGlow
RopeFx
Taurus
70
71
72
73
74
LED LAMPS
Centinel MR16
Centinel PAR38
Centinal A19
Centinel CC30
Victoria Filament Lamps
76
77
83
85
88
90
COMMERCIAL
Centauri
WP Wallpacks
PL Polemounts
Apollo
Jupiter
Newark
42 landscape
28-41
58-65
58 flex
wide array of landscape lighting options
COMMERCIAL
ACCESORIES
67 CV Series
68 MD Series
wide array of ingrade fixtures
13-27
42-57
59
62
63
64
28 ingrade
flexable lighting options
66-68
66 accesories
69-74
69 led lamps
huge selection of energy efficient LED lamps
from power supplies
to mounting brakets
75-90
75 commercial
IFXs selection of commercial lighting prodcuts
ABOUT
ILLUMINFX
gENERAL
HISTORY
cOMMERCIAL
CATALOG
LED LIGHTING
illuminFx’s new LED catalog includes some of
the newest and best innovations in lighting for
outdoor settings. LED fixtures offer astounding
energy savings over traditional halogen, metal
halide, and high pressure sodium systems.
FIXTURE SELECTION
illuminFx has provided an array of different
types of LED commercial fixtures to use on a
variety of projects.
BENEFITS OF LED
LONG LIFE
Outstanding operational life
time expectation of up to
50,000 hours. This is 6 years
of continuous operation, or 12
years of 50% operation.
ENERGY EFFICIENCY
Todays most efficient way of
illumination and lighting, with
an estimated energy efficiency
of 80%-90% when compared
to traditional lighting and
conventional light bulbs.
ZERO UV EMISSIONS
LED illumination produces little
infrared light and close to no
UV emissions as well as giving
very little heat.
LOW TEMP OPERATION
LED are ideal for operation
under cold and low outdoor
temperature settings.
INSTANT LIGHTING
LED lights brighten up
immediately and when powered
on, which has great advantages
for infrastructure projects such
→Return to Main
Page
as traffic
and signal lights.
For architectural and landscape lighting
purposes, illuminFx offers a wide variety of
in-grade, surface mount, underwater, and wall
wash luminaires, in both single color and colorchanging RGB or RGBW. We divide these color
options into two families, oslo and Rio. Oslo
is single color, usually (standard) warm white
3000K and most often operable on 12VAC. Rio is
our color-changing family, operating on 24VDC.
Most fixture types are available in both oslo and
Rio versions.
illuminFx also offers a selection of high
powered commercial and industrial luminaires
ranging from interior downlights to outdoor
street and praking lot fixtures.
DEDICATED TO ENERGY SAVINGS
IlluminFx was formed in 2000 as a division
of Unitrac Energy Management Company to
manufacture water feature lighting systems
that would provide builders and pond owners
more of the benefits they were looking for, such
as smaller, easier to hide fixtures; ease of
installation and maintenance; no electricity or
heat in the water; and more versatility.
IlluminFx now sells fiber optic units that apply
to a variety of applications, using different types
of fiber and mounting systems. The cornerstone
of the IlluminFx line of pond lighting is the premanufactured fiber optic lighting kit that utilizes
25-strand, end-emitting fiber, and a choice of
either a 250-watt halogen or a 150-watt metal
halide illuminator. These kits come in 4-, 8-, 12and 16-light configurations with standard cable
lengths between 10 and 30 feet. Lengths can be
customized up to 50 feet.
The newest line of water feature fiber optics
is our “high output”, Series 7 line that utilizes
50-strand, end emitting fiber, with 150-watt
metal halide illuminators. IlluminFx also offers
star ceiling kits and rope light, for use in and
around the house.
In addition, IlluminFx now offers a full line of
warm white and full color changing LED lighting:
Rio/oslo. These fixtures can be used in and
around ponds, water features or pools, as well
as for hardscapes and architectural illumination.
For unique, “out of the box” situations, check
out our flexible lighting products and our fiber
optic lighting systems.
illuminFx reserves the right to make changes
to specifications at any time with or without notice
3
CHOOSING
YOUR LED
color
rendering index
color
temperature
BASICS
All artificial lighting sources produce light in
varied wavelengths of color.
10,000K
9,000K
8,000K
7,000K
6,000K
5,000K
4,000K
4,000K
3,000K
3,000K
2,000K
1,000K
Imagine an iron bar (in lighting lingo, we call
it a “black body radiator”). Take the bar, put
it in a furnace and heat it up. As it heats up,
measuring the bar in Kelvin degrees, the bar
goes from red to orange, to yellow, to blue.
Most people know that blue flame is hotter
than yellow, even though it looks “cooler” (think
acetylene torch).
The chart to the left shows the spectrum of
color temperature as it goes from warm to
cool. Most people associate the color blue
with “cool”, or cold. Think about blue ice, or
the deep, dark blue cold depths of the ocean.
Reds, oranges, and yellow are associated with
warmth. This is why even though a light source
described as “warm white” actually is a low
color temperature than a source described as
“cool white.”
CCT APPLICATION
Choosing the right color temperature (CCT) for
each job is typically based on both preference,
and how light works in a particular environment.
First, a list of what certain color temps are
associated with:
2700K–Incandescent light
3000K–Halogen
4000K–Metal halide
4100K–Cool white fluorescent
5000K–Sunny daylight fluorescent
6500K–”daylight”
→Table of Contents
→Return to Main Page
→Contact illuminFx
Residential lighting is typically associated with
warmer color temperatures that invoke a more
relaxed environment, However, warmer color
temps are not always the right choice.
DEFINED
The Color Rendering Index (CRI) is the relative
ability of a light source to replicate colors
generated by a reference light source of the
same color temperature. It is measured as a
number between 0 and 100.
EXPLAINED
This is often used to compare a light source
ability to replicate the sun. In this case the sun
is the reference light source. In layman’s terms
a CRI of 80 means that the LED light bulb is
replicating 80% of the visible color spectrum
that the sun would produce at the same color
temperature. A CRI of 100%, taken at a color
temperature of noon day sunlight will exactly
reproduce the colors found on a sunny day at
noon. A CRI of 50% taken at noon day sun will
partially reproduce the colors when compared to
that of a normal noon day.
CRI 50
CRI 80
CRI 90
YOUR EYE AND CCT
Your eye perceived color when the correct
wavelength of light bounce off of an object.
This means that if that wavelength is not
present, your eye will not perceive that color.
For this reason, it is important to utilize the full
spectrum when lighting your environment.
Since your eye primarily sees blues and greens
at night, it is also important to stay away from
warmer CCTs for outdoor lighting (parking lots,
building facades). High Pressure Sodium used to
be a popular choice due to its low wattage cost,
but today a higher temperature LED solution is
by far a better option.
4
asymmetric
beam angles
The asymmetric lens on our LED fixtures provide for
lighting options. Unlike standard single angle beam
spreads that are the same in both the horizontal and
vertical planes, asymmetric have different angles in either
direction. Designated as W on product codes.
Beam
Angles
BASICS
The beam angle is the degree of width that light
emanates from a light source. Specifically: The angle
between those points on opposite sides of the beam axis
where the intensity drops to 50% of maximum.
EXPLAINED
For example, a common beam spread for a LED street
or parking lot light is a 50°x120° beam. Notice how
there are two degrees mentioned for one beam. The first
measurement (in this case 50°) describes the vertical angle
of the light. The second (120°) describes the horizontal.
Examples include flood light, spot light, narrow spot
light, and wide flood light. Each is a way of stating LED
beam angle. Typically a narrow beam angle is a ‘spot’ of
light and a broader beam angle ‘floods’ an area with light,
called a flood light.
However LED lighting fixtures and lamps are more than
just floodlights and spotlights. Like any light bulb, they
come in shapes and technologies to fit any application.
Many of illuminFx’s LED commercial fixtures and lamps
are highly specified, containing engineered surfaces
that control the beam of light to an angle so precise it
takes seven different classifications just to explain their
possible uses.
NOTE : These seven
classifications
specify standard
beam angles. They
are the same in
both the horizontal
and vertical plane.
However, some
fixtures such as
street lights, come
with optional
ASYMMETRIC beam
spreads.
In this example the street light will cast a WIDE FLOOD
towards the ground but the 50° part of the LED lens will
direct the light away from the light pole and towards the
road.
Another use for asymmetric beam spreads and a good
way to visualize it is with in grade fixtures. In this case the
beam is a 45°x35°. This directs light up and towards the
wall (diagram 1).
x
Diagram 1
IES CLASSIFICATION
In addition, some fixtures, particularly street lights are
classified under the IES system.
A — VERY NARROW SPOT (SP / NEMA 1)
A beam angle between 6–18°. Perfect for small
columns, statues, and product placement.
B — NARROW SPOT (SP / NEMA 2)
A beam angle between 18–29°. Also popular in retail
settings for product illumination or for outdoor lighting
of signs and garden features.
CLASSIFICATIONS
C — SPOT (SP / NEMA 3)
A beam angle between 29–46°. A slighting wider
beam is great for highlighting sales areas in stores or
architectural features, and trees.
D — NARROW FLOOD (FL / NEMA 4)
A beam angle between 46–70°. Now up to the smallest
flood lighting fixtures. They are best used to illuminate
bigger indoor and outdoor features.
E — FLOOD (FL / NEMA 5)
A beam angle between 70–100°. This classifications
fixture have a variety of uses. Everything from pendant
lights to recessed lighting.
F — WIDE FLOOD (FL / NEMA 6)
A beam angle between 100–130°. This light fixtures are
used to cover a wide swath of territory with light.
G — VERY WIDE FLOOD (FL / NEMA 7)
A beam angle between 130+°. Finally, these fixtures
typically used for A lamps or recessed lighting to
illuminate a large area in a soft glow.
TYPE I
Generally applicable to a luminaires location near
the center of a roadway where the mounting height
is approximately equal to the roadway width.
TYPE II
Generally applicable to luminaires located at or
near the side of relatively narrow roadways, where
the width of the roadway does not exceed 1.75
times the designed mounting height.
TYPE III
Intended for luminaires mounted at or near the
side of medium width roadways or areas, where
the width of the roadway or area does not exceed
2.75 times the mounting height.
TYPE IV
Intended for side-of-road mounting and is
generally used on wide roadways where the
roadway width does not exceed 3.7 times the
mounting height.
TYPE IV
Intended for luminaires mounting at or near
center of roadways, center islands of parkway,
and intersections. It is also meant for large,
commercial parking lot lighting as well as areas
where sufficient, evenly distributed light is
necessary.
5
6-12
L i g htin g
C o n t r o l
→Table of Contents
→Return to Main Page
→Contact illuminFx
7
Level Select
8
Color Select
10
Power Amplifiers
11
Color Select PLUS
12
Spectrum Select
illuminFx reserves the right to make changes
to specifications at any time with or without notice
6
control
LEVEL SELECT
Single Color Controller
LDC
SPECIFICATIONS
LEVEL SELECT
Voltage
5~24VDC
Peak Output Power
144W@12V | 288W@24V
Peak Output Current
12 Amps
IlluminFx’s LDC Level Select controller is a simple and
PWM Control
256 levels
Working Temp
-30°C~70°C
dynamic modes with 10 speed and brightness levels. You can
Components
SMD parts | Gold plated double sided FR-4
PCB
easily change the mode, speed, and brightness. Both include
Certifications
RoHS
an auto memorize function that will hold your last setting in
Power Connector
Red/Black cable
memory for when you re-activate the system.
LED Connector
2-Color Flat Cable
compact single color solution for almost any LED system. Both
the wireless and wired versions come with presets including 8
LDC–102WS : In Line
LDC–106S : Wireless
Body Size
1.3” x 0.5” x 0.2”
Body Size
1.3” x 0.5” x 0.2”
Cable Length
4.33”
Cable Length
4.33”
Weight
.233 ounces
Weight
.233 ounces
Dynamic Modes
8
Dynamic Modes
8
Dynamic Speed
10 levels
Dynamic Speeds
10 levels
Color Brightness
10 levels
Color Brightness
10 levels
Remote Weight
.7 ounces
Remote Frequency
433.92 MHz
Remote Battery
CR2025 3V
Remote Distance
> 15 metes
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
7
control
COLOR SELECT
RGB Controller
LCS
SPECIFICATIONS
COLOR SELECT
Voltage
5~24VDC
Peak Output Power
144W@12V | 288W@24V
Peak Output Current
3x4 Amps
IlluminFx’s LCS Color Select controller is a simple and
PWM Control
256 levels
Working Temp
-30°C~70°C
presets including 19 dynamic modes and 20 static colors. You
Components
SMD parts | Gold plated double sided FR-4
PCB
can easily change the mode, speed, color and brightness. Both
Certifications
RoHS
include an auto memorize function that will hold your last
Power Connector
Red/Black cable
setting in memory for when you re-activate the system.
LED Connector
4-Color Flat Cable
compact RGB color changing solution for almost any LED
system. Both the wireless and wired versions come with
LCS–1 : In Line
LCS–1RF : Wireless
Body Size
1.3” x 0.5” x 0.2”
Body Size
1.3” x 0.5” x 0.2”
Cable Length
4.33”
Cable Length
4.33”
Weight
.233 ounces
Weight
.233 ounces
Dynamic Modes
19
Dynamic Modes
19
Dynamic Speed
10 levels
Dynamic Speeds
10 levels
Static Color
20
Static Color
20
Color Brightness
5 levels
Color Brightness
10 levels
Remote Weight
.7 ounces
Remote Frequency
433.92 MHz
Remote Battery
CR2025 3V
Remote Distance
> 15 metes
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
8
Dynamic Modes — LCS–1
Dynamic Modes — LCS–1RF
Name
Description
Name
Description
1
7 Color Slow Fade
Slow fade between cyan, white, blue, magenta, red, yellow,
and green
1
7 Color Slow Fade
Slow fade between cyan, white, blue, magenta, red, yellow,
and green
2
Blue Fade
Slow blue brightness fade
2
RGB Fade
Slow fade between red, green, and blue
3
Cyan Fade
Slow cyan brightness fade
3
7 Color Fade
4
Green Fade
Slow green brightness fade
Fade between cyan, white, blue, magenta, red, yellow, and
green
5
Yellow Fade
Slow yellow brightness fade
4
Blue Fade
Slow blue brightness fade
6
Red Fade
Slow red brightness fade
5
Magenta Fade
Slow magenta brightness fade
7
White Fade
Slow white brightness fade
6
Red Fade
Slow red brightness fade
8
RGB Flash
Static color change between Red, green, and blue
7
Yellow Fade
Slow yellow brightness fade
Green Fade
Slow green brightness fade
7 Color Flash
Static color change between cyan, white, blue, magenta,
red, yellow and green
8
9
9
White Fade
Slow white brightness fade
10
RGB Blink
Quick color change between red, green, and blue
10
RGB Flash
Static color change between Red, green, and blue
11
Blue Strobe
A blue strobe light effect
11
7 Color Flash
12
Cyan Strobe
A cyan strobe light effect
Static color change between cyan, white, blue, magenta,
red, yellow and green
13
A green strobe light effect
12
RGB Blink
Quick color change between red, green, and blue
Green Strobe
14
A red strobe light effect
13
Blue Strobe
A blue strobe light effect
Red Strobe
15
A white strobe light effect
14
Magenta Strobe
A magenta strobe light effect
White Strobe
16
A strobe light effect that goes between red, green, and blue
15
Red Strobe
A red strobe light effect
RGB Strobe
17
Cycles through the different programs on the controller
16
Green Strobe
A green strobe light effect
Demo Mode
18
A strobe light effect that goes between red, green, and blue
17
White Strobe
A white strobe light effect
20 Color Fade
19
Slow fade between red, green, and blue
18
RGB Strobe
A strobe light effect that goes between red, green, and blue
RGB Fade
19
Demo Mode
Cycles through the different programs on the controller
STATIC COLORS — LCS–1
STATIC COLORS — LCS–1RF
Green
Red
Red
Green
Blue
Blue
Cerulean
Blue Violet
Denim
Pacific Blue
Indigo
Sky Blue
Fuschia
Aquamarine
Hot Magenta
Caribbean Green
Wild Strawberry
Screamin’ Green
Yellow Orange
Yellow Green
Yellow Green
Yellow
Screamin Green
Orange
Caribbean Green
Hot Magenta
Robin’s Egg Blue
Fuschia
White
White
Sky Blue
Cotton Candy
Aquamarine
Lavender
Wild Blue Yonder
Wild Blue Yonder
Blue Green
Indigo
Navy Blue
Cerulean
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
9
control
POWER AMPLIFIER
Single Color / RGB
PA
SPECIFICATIONS
POWER AMPLIFIER
Voltage
5~24VDC
Peak Output Power
144W@12V | 288W@24V
Peak Output Current
12 Amps
IlluminFx’s PA Power Amplifiers are used with the LEVEL
Efficiency
>95%
Input Voltage Swing
±3V
Components
SMD parts | Gold plated double sided FR-4 PCB
Certifications
RoHS
(LEVEL SELECT, COLOR SELECT, or COLOR SELECT PLUS)
Cable Length
4.33”
and dupicate that signal to additional lighting fixtures. It makes
Body Size
1.3” x 0.5” x 0.2”
it so that a job with more than one power supply can have all
Working Temp
-22˚-158˚F
SELECT, COLOR SELECT and COLOR SELECT PLUS systems.
WHAT THEY DO
Power amplifiers take the signal from the lighting controller
the LED fixtures doing the same thing at the same time.
WHEN THEY ARE NEEDED
LED Connector
Power amplifiers are needed when the wattage of the light
fixtures on a job exceeds the wattage limits of a single power
supply or of the lighting controller itself (LEVEL SELECT,
COLOR SELECT or COLOR SELECT PLUS). Basically, if more
Part Numbers
SINGLE COLOR
Input Power : Red / Black
Input Data : Red / Black
Output Data : Red / Black
RGB
Input Power : Red / Black
Input Data : Red / Green / Blue / Black
Output Data : Red / Green / Blue / Black
SINGLE COLOR : PA-1032WS
RGB : PA-103WF
than one power supply is needed to power the entire system,
then a power amplifier is necessary.
SAMPLE WIRING DIAGRAM
120VAC in
Power Supply
12/24VDC to Controller
LED Controller
Data Out to Light Fixtures
Data Out to PA
120VAC in
Power Supply
→Table of Contents
→Return to Main Page
→Contact illuminFx
12/24VDC to PA
Power Amp
illuminFx reserves the right to make changes
to specifications at any time with or without notice
Data Out to Light Fixtures
10
control
COLOR SELECT+
RGB Wireless Controller
CSP
SPECIFICATIONS
COLOR SELECT PLUS
IlluminFx’s Color Select PLUS WiFi controllable color controller
is a great choice for those that want more control over their
light fixtures. With the Color Select PLUS, users can adjust their
lighting fixtures wirelessly over WiFi with their smart phone.
Simply install the free application, and begin changing the colors
of your lights. You can select from 16.7 million different colors,
Voltage
12~24VDC
Peak Output Power
144W@12V | 288W@24V
Peak Output Current
3x4 Amps
WiFi Control
2.4GHz with selectable frequencies
Working Temp
-20°C~50°C
RGB Color Modes
32 Fixed modes, 8 DIY scenes
Dimensions
128mm x 73mm x 45mm
Output Control
Control over single color, warm/cool white
temperature, Full RGB
and adjust the color changing modes. Select from one of the 32
fixed modes, and change the speed, or create you very one. You
can choose you own colors and transitions in the DIY mode and
save these as scenes for later use. Up to 9 scenes can be saved
Diagram
and later changed with one touch. The NEW WiFi104 also allows
the ability to add extra zones so you can get different colors in
different locations. Inquire for more information.
Weight
325g
WiFi 103/4 PROGRAM
Free to download and simple to use. The WiFi103/104 program
makes controlling your lights a breeze with the ability to adjust
RGB, CT, and dimming all from your phone. Available for both
Apple and Android phones (use the QR codes to download).
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
11
control
SPECTRUM SELECT
RGB DMX Controller
RC
SPECIFICATIONS
Voltage
Input 90-280V POE
DMX
Up to 512 channels
Material
Anodized aluminum body
Scene Memory
4 scenes
Connection
USB to computer with provided cable
vDesigner
Compatible with Windows XP, Vista, and 7
Dimensions
110mm x 100mm x 29mm
Power Supply Input
100 to 240VAC, 50/60 Hz
The functionally allows any inexperienced person to set any
Control Interface
DMX 512/RDM
accurate static color using Color and Saturation, even accurate
Weight
240g
SPECTRUM SELECT
E600S WALL MOUNT CONTROLLER
The E600S controller is the first controller specifically designed
for dynamic color changing effects in an architectural fixture, it
has a unique design that enables it to fit into nearly any design
environment.
color temperature from 2000K-9000K can be selected. One of the
most unique features of the E600S is the possibility to change
color of any preset and speed just by the mere click of a button
and then re-save it to any preset by holding the preset button.
vDESIGNER SOFTWARE
The Visual design software allows for fast and easy setup of
any dynamic installation, a list of pre-defined designs and the
capability to create custom solutions with fast and direct access
to all features, thus ensuring accurate and simple design flow for
the experienced and non experienced. The Visual designer also
serves as an offline editor allowing design to be pre-programmed
off site and later uploaded to any device via USB.
DMX SYSTEM
The E600S controller utilizes DMX programming to tell the
lights what to do. illuminFx houses all the internal components
together in a RIO control center that includes quick connect plugs
to easily interface the lights with the system.
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
12
13-27
u n d e r w a t e r
fi x t u res
14 Cabo
21 Manta Ray
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
13
underwater
R I O | oslo
CABO
FL2
3/7W LED
SPECIFICATIONS
INTERNAL DMX
CABO FL2 :
Housing & Trim Ring
Stainless steel 304
Cable Gland
IP68 imported
Environment
up to 5m depth
The CABO FL2 Series of LED Underwater Recessed fixtures are
Cover Lens
10mm thick tempered glass
Loading Capacity
4410 lbs @ 18 mph
Driver
Single color—1 circuit
RGB 3in1—3 circuits
Cord
OSLO Warm White—(1)18/2 @ 6ft
RIO RGB—(2)18/2 @ 6ft
Cord Termination
OSLO Warm White—(1)Tinned wire ends
RIO RGB—(2)Tinned wire ends
Mounting Sleeve
Rugged, corrosion resistant PP
perfect for any submersible lighting application. Great for pool
or pond illumination as well as fountain and waterfall lighting.
Comes with optional PVC mounting sleeve.
•
2–year warranty
•
Long life : 30,000 hours | Power Factor : ≥0.9
•
Internal integrated DMX for easy wiring and installation
PHOTOMETRICS
Height
1m
2m
3m
4m
6m
Intensity (foot candles)
30 Degree Beam
Warm White
DIMENSIONS
3w / 30°
ø(m)
60
0.31m
15
0.62m
6.9
0.93m
3.9
1.24m
1.7
1.86m
LED Array
Input
Voltage
Beam
Angle*
Cord
Termination
Max
Power
LUM
Flux
FL2-L13-1AWC-S-06HW
1 x 3W
12VAC
Warm White
3000K
30°
2-wire
3W
270
FL2-L13-1ACC-S-06HW
1 x 3W
12VAC
Cool White
6000K
30°
2-wire
3W
330
FL2-L23-2DXC-S-06HW
2 x 3W
24VDC
RGB
30°
(2) 2-wire
9.1W
Variable
FL2-L23-1AWC-S-06HW
2 x 3W
12VAC
Warm White
3000K
30°
2-wire
7W
536
FL2-L23-1ACC-S-06HW
2 x 3W
12VAC
Cool White
6000K
30°
2-wire
7W
630
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
Color
*Also available in 15°, and 45°
Inquire for more information
illuminFx reserves the right to make changes
to specifications at any time with or without notice
14
underwater
R I O | oslo
CABO
FL3
8/14W LED
SPECIFICATIONS
INTERNAL DMX
CABO FL3 :
Housing & Trim Ring
Stainless steel 304
Cable Gland
IP68 imported
Environment
up to 5m depth
The CABO FL3 Series of LED Underwater Recessed fixtures are
Cover Lens
10mm thick tempered glass
Loading Capacity
4410 lbs @ 18 mph
Driver
Single color—1 circuit
RGB 3in1—3 circuits
Cord
OSLO Warm White—(1)18/2 @ 6ft
RIO RGB—(2)18/2 @ 6ft
Cord Termination
OSLO Warm White—(1)Tinned wire ends
RIO RGB—(2)Tinned wire ends
Mounting Sleeve
Rugged, corrosion resistant PP
perfect for any submersible lighting application. Great for pool
or pond illumination as well as fountain and waterfall lighting.
Comes with optional PVC mounting sleeve.
•
5–year warranty
•
Long life : 30,000 hours | Power Factor : ≥0.9
•
Internal integrated DMX for easy wiring and installation
SPECIAL ORDER
allow extended lead time
PHOTOMETRICS
Height
1m
2m
3m
4m
6m
Intensity (foot candles)
25 Degree Beam
Warm White
DIMENSIONS
8w / 25°
ø(m)
168
0.27m
41.8
0.62m
18.6
0.83m
10.5
1.11m
4.6
1.66m
LED Array
Input
Voltage
Beam
Angle*
Cord
Termination
Max
Power
LUM
Flux
FL3-L16-1AWB-S-06HW
1 x 6W
12VAC
Warm White
3000K
25°
2-wire
8W
540
FL3-L16-1ACB-S-06HW
1 x 6W
12VAC
Cool White
6000K
25°
2-wire
8W
660
FL3-L26-2DXB-S-06HW
2 x 6W
24VDC
RGB
25°
(2) 2-wire
18.2W
Variable
FL3-L26-1AWC-S-06HW
2 x 6W
12VAC
Warm White
3000K
25°
2-wire
14W
1070
FL3-L26-1ACC-S-06HW
2 x 6W
12VAC
Cool White
6000K
25°
2-wire
14W
1260
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
Color
*Also available in 15°, and 40°
Inquire for more information
illuminFx reserves the right to make changes
to specifications at any time with or without notice
15
underwater
R I O | oslo
SATURN
FL5
12/20W LED
SPECIFICATIONS
INTERNAL DMX
SATURN FL5 :
Housing & Trim Ring
Stainless steel 304
Cable Gland
IP68 imported
Environment
up to 5m depth
The SATURN FL5 Series of LED Fountain Fixtures are
Cover Lens
10mm thick tempered glass
LED
CREE High Powered w/optical lens
fountains. Imbed it in the concrete bed around the fountain jet
Driver
Single color—1 circuit
RGB 3in1—3 circuits
to illuminate the stream of water.
Cord
OSLO Warm White—(1)18/2 @ 6ft
RIO RGB—(2)18/2 @ 6ft
Cord Termination
OSLO Warm White—(1)Tinned wire ends
RIO RGB—(2)Tinned wire ends
Mounting Hole
ø1.97”
specifically designed to be used on outdoor fountains. The FL5,
with its flanged design makes it a great solution for dry pad
•
5–year warranty
•
Long life : 30,000 hours | Power Factor : ≥0.9
•
Internal integrated DMX for easy wiring and installation
PHOTOMETRICS
Height
1m
2m
3m
4m
6m
Intensity (foot candles)
12 Degree Beam
Warm White
DIMENSIONS
8w / 12°
168
ø(m)
0.27m
41.8
0.62m
18.6
0.83m
10.5
1.11m
4.6
1.66m
ø1.97”
LED Array
Input
Voltage
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
FL5-L91-1AWA-S-06HW
9 x 1W
12VAC
Warm White
3000K
12°
2-wire
12W
810
FL5-L91-1ACA-S-06HW
9 x 1W
12VAC
Cool White
6000K
12°
2-wire
12W
990
FL5-L92-2DXA-S-06HW
9 x 2W
24VDC
RGB
12°
(2) 2-wire
26W
Variable
FL5-L92-1AWA-S-06HW
9 x 2W
12VAC
Warm White
3000K
12°
2-wire
20W
1606
FL5-L92-1ACA-S-06HW
9 x 2W
12VAC
Cool White
6000K
12°
2-wire
20W
1890
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
16
underwater
R I O | oslo
SATURN
FL6
12/20W LED
SPECIFICATIONS
INTERNAL DMX
SATURN FL6 :
Housing & Trim Ring
Stainless steel 304
Cable Gland
IP68 imported
Environment
up to 5m depth
The SATURN FL6 Series of LED Fountain Fixtures are
Cover Lens
10mm thick tempered glass
LED
CREE High Powered w/optical lens
Driver
Single color—1 circuit
RGB 3in1—3 circuits
Cord
OSLO Warm White—(1)18/2 @ 6ft
RIO RGB—(2)18/2 @ 6ft
Cord Termination
OSLO Warm White—(1)Tinned wire ends
RIO RGB—(2)Tinned wire ends
Mounting Hole
ø1.97”
specifically designed to be used on outdoor fountains. The FL6
is designed for wet fountain applications. Simply attach the ring
to a fountain nozzel and it will evenly illuminate the fountain jet.
•
5–year warranty
•
Long life : 30,000 hours | Power Factor : ≥0.9
•
Internal integrated DMX for easy wiring and installation
PHOTOMETRICS
Height
1m
2m
3m
4m
6m
Intensity (foot candles)
12 Degree Beam
Warm White
DIMENSIONS
8w / 12°
168
ø(m)
0.27m
41.8
0.62m
18.6
0.83m
10.5
1.11m
4.6
1.66m
ø1.97”
LED Array
Input
Voltage
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
FL6-L91-1AWA-S-06HW
9 x 1W
12VAC
Warm White
3000K
12°
2-wire
12W
810
FL6-L91-1ACA-S-06HW
9 x 1W
12VAC
Cool White
6000K
12°
2-wire
12W
990
FL6-L92-2DXA-S-06HW
9 x 2W
24VDC
RGB
12°
(2) 2-wire
26W
Variable
FL6-L92-1AWA-S-06HW
9 x 2W
12VAC
Warm White
3000K
12°
2-wire
20W
1606
FL6-L92-1ACA-S-06HW
9 x 2W
12VAC
Cool White
6000K
12°
2-wire
20W
1890
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
17
underwater
R I O | oslo
CABO
FL3
8W LED
SPECIFICATIONS
SPECIAL ORDER
allow extended lead time
CABO FL3 :
Housing & Trim Ring
316L# stainless steel
Gasket
EPDM gasket
Glass
Step-tempered clear glass T=8mm
The CABO FL3 Series of LED Underwater Recessed fixtures are
Lens
Optical lens efficiency ≥85%
Cable Gland
IP68 PG-11 copper and nickel coated
Waterproof Seal
Molded shaped double silicone seal
Environment
-4˚F~104˚F less than 1m depth
perfect for any submersible lighting application. Great for pool
or pond illumination as well as fountain and waterfall lighting.
Comes with optional PVC mounting sleeve.
•
5–year warranty
•
Long life : 50,000 hours
Driver
Single color—1 circuit
RGB 3in1—3 circuits
•
NOTE : MUST BE INSTALLED UNDERWATER to prevent
Cord
20 ft
Cord Termination
OSLO Warm White—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
Mounting Sleeve
058 PVC
light from overheating
PHOTOMETRICS
8w / 30°
Intensity (foot candles)
30 Degree Beam
Warm White
6m
8m
10m
H
67
0.9m
0.8m
16.7
1.8m
1.8m
7.5
2.7m
2.7m
4.2
3.6m
3.6m
4.6m
4.6m
2.7
V Spread : 21.6m
H Spread : 21.6m
Height
2m
4m
6m
8m
10m
V
H
12.3
1.3m
1.1m
8.1
2.5m
2.2m
1.4
3.8m
3.3m
0.8
5.1m
4.4m
6.3m
5.5m
0.5
Height
Input
Voltage
FL3-L42-1AWB-S-20HW
4 x 2W
12VAC
FL3-L42-1AWW-S-20HW
4 x 2W
FL3-L42-2DXB-S-201M
FL3-L42-2DXW-S-201M
→Table of Contents
→Return to Main Page
→Contact illuminFx
ø5.31”


ø5”
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
30°
2-wire
8.9W
500
12VAC
Warm White
3000K
ASY
45°x35°
2-wire
8.9W
479
4 x 2W
24VDC
RGB
25°
Male QC Plug
15W
Variable
4 x 2W
24VDC
RGB
ASY
45°x35°
Male QC Plug
15W
Variable
Color

optional 58# mounting sleeve
V Spread : 35.2m
H Spread : 30.8m
LED Array
Model Number

 4.72 ” 
4m
V
8w / 45°x35°
Intensity (foot candles)
Asymmetrical Beam
Warm White
 2.28” 
2m
DIMENSIONS
illuminFx reserves the right to make changes
to specifications at any time with or without notice
18
underwater
R I O | oslo
CABO
FL4
12W LED
SPECIFICATIONS
SPECIAL ORDER
allow extended lead time
CABO FL4 :
Housing & Trim Ring
316L# stainless steel
Gasket
EPDM gasket
Glass
Step-tempered clear glass T=9mm
The CABO FL4 Series of LED Underwater Recessed fixtures are
Lens
Optical lens efficiency ≥85%
Cable Gland
IP68 PG-11 copper and nickel coated
Waterproof Seal
Molded shaped double silicone seal
Environment
-4˚F~ 104˚F less than 1m depth
perfect for any submersible lighting application. Great for pool
or pond illumination as well as fountain and waterfall lighting.
Comes with optional PVC mounting sleeve.
•
5–year warranty
•
Long life : 50,000 hours
Driver
Single color—1 circuit
RGB 3in1—3 circuits
•
NOTE : MUST BE INSTALLED UNDERWATER to prevent
Cord
20 ft
Cord Termination
OSLO Warm White—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
Mounting Sleeve
059 PVC
light from overheating
PHOTOMETRICS
12w / 30°
Intensity (foot candles)
30 Degree Beam
Warm White
8m
10m
105
0.7m
0.7m
26
1.5m
1.5m
11.5
2.2m
2.2m
6.5
3.0m
3.0m
4.2
3.7m
3.7m
V Spread : 21.1m
H Spread : 20.7m
Height
2m
4m
6m
8m
10m
V
H
27.4
1.1m
1.2m
6.9
2.2m
2.3m
3.1
3.2m
3.5m
1.7
4.3m
4.6m
1.1
5.4m
4.6m
Input
Voltage
FL4-L62-1AWB-S-20HW
6 x 2W
12VAC
FL4-L62-1AWW-S-20HW
6 x 2W
FL4-L62-2DXB-S-201M
FL4-L62-2DXW-S-201M
→Table of Contents
→Return to Main Page
→Contact illuminFx


ø6.14”
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
30°
2-wire
16.8W
906
12VAC
Warm White
3000K
ASY
45°x35°
2-wire
16.8W
772
6 x 2W
24VDC
RGB
25°
Male QC Plug
24W
Variable
6 x 2W
24VDC
RGB
ASY
45°x35°
Male QC Plug
24W
Variable
Color

optional 59# mounting sleeve
V Spread : 30.1m
H Spread : 32.1m
Height
LED Array
Model Number
ø7.44”

 4.72 ” 
6m
H
2.1”
4m
V
12w / 45°x35°
Intensity (foot candles)
Asymmetrical Beam
Warm White
 3” 
2m
DIMENSIONS
illuminFx reserves the right to make changes
to specifications at any time with or without notice
19
underwater
R I O | oslo
CABO
FL7
12W LED
SPECIFICATIONS
SPECIAL ORDER
Housing & Trim Ring
316L# stainless steel
Gasket
EPDM gasket
Glass
Step-tempered clear glass T=9mm
Loading Capacity
Exert force area of ø10=330lbs
Lens
Optical lens efficiency ≥85%
or pond illumination as well as fountain and waterfall lighting.
Cable Gland
IP68 PG-11 copper and nickel coated
Comes with optional PVC mounting sleeve.
Waterproof Seal
Molded shaped double silicone seal
allow extended lead time
CABO FL7 :
The CABO FL7 Series of LED Underwater Recessed fixtures are
perfect for any submersible lighting application. Great for pool
•
5–year warranty
Environment
-4˚F~ 104˚F less than 1m depth
•
Long life : 50,000 hours
•
NOTE : MUST BE INSTALLED UNDERWATER to prevent
Driver
Single color—1 circuit
RGB 3in1—3 circuits
Cord
20 ft
Cord Termination
OSLO Warm White—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
Mounting Sleeve
039 PVC
light from overheating @ less than 1m depth
PHOTOMETRICS
DIMENSIONS
12w / 30°
Intensity (foot candles)
30 Degree Beam
Warm White
2m
4m
6m
8m
10m
V
H
18
1.0m
1.1m
4.5
2.0m
2.3m
2.0
2.9m
3.4m
1.1
3.9m
4.5m
4.9m
5.7m
0.8
9.84”
3.0”
2.56”
9.06”
2.56”
3.56”
V Spread : 27.5m
H Spread : 31.6m
Height
LED Array
Input
Voltage
FL7-L62-1AWB-S-20HW
6 x 2W
12VAC
FL7-L62-1AWW-S-20HW
6 x 2W
FL7-L62-2DXB-S-201M
FL7-L62-2DXW-S-201M
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
30°
2-wire
11.3W
520
12VAC
Warm White
3000K
ASY
50°x35°
2-wire
11.3W
520
6 x 2W
24VDC
RGB
25°
Male QC Plug
14.9W
Variable
6 x 2W
24VDC
RGB
ASY
50°x35°
Male QC Plug
14.9W
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
20
underwater
oslo
MANTA RAY
MR1
3/4W LED
SPECIFICATIONS
MANTA RAY MR1 :
The MANTA RAY MR1 underwater fixture is a long lasting, high
quality composite LED housing. With IFXs Centinel LED Lamps this
fixture outputs highly efficent light in a compact package.
•
Long life : 50,000 hours
CENTINEL LAMPS
•
High brightness
•
Low power consumption (3 / 3.8W)
•
Beam angles: 40 or 60 degrees
•
Color Temp : Warm (3000K) or Cool (6500K) White
•
Constant current circuit
•
Long Life : 50,000 hours
•
High efficiency : 70 lumens per watt
•
Completely submersible (IP68 rating)
•
No UV radiation
•
Easy to install
DIMENSIONS
*appearance of lamps may change
4.5”


3.25”


2.5”

Wattage
Input
Voltage
MR1-W
3.8W
12VAC
MR1-C
3W
MR1-W4
3W
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx

Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
60°
2-wire
4W
200
12VAC
Cool White
6500K
60°
2-wire
3W
310
12VAC
Warm White
3000K
40°
2-wire
3W
240
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
21
underwater
R I O | oslo
MANTA RAY
MR3
12W LED
MR3-BRACKET
optional mounting bracket
SPECIFICATIONS
SPECIAL ORDER
allow extended lead time
MANTA RAY MR3 :
Housing
Stainless steel
Trim Ring
316L# stainless steel
Glass
Step-tempered clear glass T=8mm
The MANTA RAY MR3 underwater fixture is a low profile waterproof
Lens
Optical lens efficiency ≥85%
Cable Gland
IP68 PG-11 copper and nickel coated
Waterproof Seal
EPDM Gasket
Loading Capacity
Exert force area of ø10=1470.5 lbs
Driver
Single color—1 circuit
RGB 3in1—3 circuits
Cord
20 ft
Cord Termination
OSLO WHITE—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
Environment
Water temperature : -4°~104°F
Less than 1 meter depth
fixture. Its slim design makes it a perfect choice for underwater
applications where water depth is minimal. Though it comes in a
small package, this LED fixture puts out a lot of light output, and
is very easy to install. Use the optional mounting bracket (MR3BRACKET) can be used for more installation options.
•
5–year warranty
•
Long life : 50,000 hours
•
NOTE : MUST BE INSTALLED UNDERWATER to prevent light
from overheating
PHOTOMETRICS
DIMENSIONS
12w / 25°
Intensity (foot candles)
25 Degree Beam
Warm White
6m
8m
10m
38.1
0.9m
0.9m
9.5
1.9m
1.8m
4.2
2.8m
2.8m
2.4
3.7m
3.7m
1.5
4.7m
4.6m
ø4.5”



 3.15” 
4m
H
 1.26” 
2m
V
4.33”

V Spread : 26.3m
H Spread : 26.3m
Height
Model Number
LED Array
Input
Voltage
MR3-L62-1AWB-S-20HW
6 x 2W
12VAC
MR3-L62-1ACB-S-20HW
6 x 2W
MR3-L62-2DXB-S-201M
6 x 2W
→Table of Contents
→Return to Main Page
→Contact illuminFx
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
25°
2-wire
13W
520
12VAC
Cool White
6000K
25°
2-wire
13W
605
24VDC
RGB
25°
Male QC Plug
16.8W
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
22
underwater
R I O | oslo
MANTA RAY
MR4
6W LED
STAND-MR4
optional tripod stand
SPECIFICATIONS
MANTA RAY MR4 :
Housing & Bracket
316# stainless steel
Front Cover
316L# stainless steel
Glass
Step-tempered clear glass T=5mm
The MANTA RAY MR4 underwater fixture is a low profile spot
Cable Gland
IP68 PG-11 copper and nickel coated
Waterproof Seal
Molded shaped silicon seal under front cover
Silicon glue encasing LEDs, lens and PCB
package, this LED fixture puts out a lot of light output, and is
PCB
Coefficient of heat conductivity≥2.0w/mk
very easy to install. Use the optional tripod stand (STAND-MR4)
Lens
Optical lens efficiency ≥85%
Driver
Single color—1 circuit
RGB 3in1—3 circuits
light waterproof fixture. Its slim design makes it a perfect
choice for smaller underwater jobs. Though it comes in a small
for more installation flexibility.
•
5–year warranty
•
Long life : 50,000 hours
Cord
20 ft
•
NOTE : MUST BE INSTALLED UNDERWATER to prevent
Cord Termination
OSLO WHITE—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
Environment
Water temperature : -4°~104°F
Less than 1 meter depth
light from overheating
PHOTOMETRICS
DIMENSIONS
6w / 15°
1.8m
1.8m
0.9
2.7m
2.7m
0.5
3.6m
3.6m
4.5m
4.5m
0.3
V Spread : 25.4m
H Spread : 25.4m
Height
Model Number
LED Array
Input
Voltage
MR4-L32-1AWA-S-20HW
3 x 2W
12VAC
MR4-L32-1ACA-S-20HW
3 x 2W
MR4-L32-2DXB-S-201M
3 x 2W
→Table of Contents
→Return to Main Page
→Contact illuminFx

10m
2.0
 1.5”
 ø4.4” 
6.33”
8m
0.9m
8.1

6m
0.9m

4m
H

2m
V
4.45”
Intensity (foot candles)
15 Degree Beam
Warm White

2.5” 
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
15°
2-wire
5.8W
272
12VAC
Cool White
6000K
15°
2-wire
5.8W
321
24VDC
RGB
25°
Male QC Plug
7.7W
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
23
underwater
R I O | oslo
MANTA RAY
MR5
12W LED
STAND-MR5
optional tripod stand
SPECIAL ORDER (RGB only)
allow extended lead time
SPECIFICATIONS
MANTA RAY MR5 :
Housing & Bracket
316# stainless steel
Front Cover
316L# stainless steel
Glass
Step-tempered clear glass T=5mm
The MANTA RAY MR5 underwater line of fixtures are perfect for
Cable Gland
IP68 PG-11 copper and nickel coated
Waterproof Seal
Molded shaped silicon seal under front cover
Silicon glue encasing LEDs, lens and PCB
jobs. Use the optional tripod stand (STAND-MR5) for more
PCB
Coefficient of heat conductivity≥2.0w/mk
installation flexibility.
Lens
Optical lens efficiency ≥85%
Driver
Single color—1 circuit
RGB 3in1—3 circuits
medium size jobs. Smaller size means it can be used in tight
quarters, and its narrow beam make it perfect for spot lighting
•
5–year warranty
•
Long life : 50,000 hours
•
NOTE : MUST BE INSTALLED UNDERWATER to prevent
Cord
20 ft
light from overheating
Cord Termination
OSLO WHITE—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
Environment
Water temperature : -4°~104°F
Less than 1 meter depth
PHOTOMETRICS
DIMENSIONS
12w / 15°
Intensity (foot candles)
15 Degree Beam
Warm White
1.8m
1.8m
4.6
2.8m
2.8m
2.6
3.7m
3.7m
4.5m
4.5m
1.6
ø6.0”

V Spread : 25.3m
H Spread : 25.3m
Height
 2.71” 
Model Number
LED Array
Input
Voltage
MR5-L62-1AWA-S-20HW
6 x 2W
12VAC
MR5-L62-1ACA-S-20HW
6 x 2W
MR5-L62-2DXB-S-201M
6 x 2W
→Table of Contents
→Return to Main Page
→Contact illuminFx
 1.5”

10.2


10m
0.9m
8.85”
8m
0.9m

6m
41.6
6.41”
4m
H

2m
V
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
15°
2-wire
11.2W
520
12VAC
Cool White
6000K
15°
2-wire
11.2W
600
24VDC
RGB
25°
Male QC Plug
17.3W
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
24
underwater
R I O | oslo
MANTA RAY
MR6
24W LED
STAND-MR6
optional tripod stand
SPECIFICATIONS
MANTA RAY MR6 :
Housing & Bracket
316# stainless steel
Front Cover
316L# stainless steel
Glass
Step-tempered clear glass T=5mm
The MANTA RAY MR6 underwater fixtures are a high powered
Cable Gland
IP68 PG-11 copper and nickel coated
Waterproof Seal
Molded shaped silicon seal under front cover
Silicon glue encasing LEDs, lens and PCB
such as large fountains, waterfalls and ponds. Use the optional
PCB
Coefficient of heat conductivity≥2.0w/mk
tripod stand (STAND-MR6) for more installation flexibility.
Lens
Optical lens efficiency ≥85%
Driver
Single color—1 circuit
RGB 3in1—3 circuits
spot light solution. Inside a relatively small package is housed
a lot of light output power. Perfect for those larger lighting jobs
•
5–year warranty
•
Long life : 50,000 hours
•
NOTE : MUST BE INSTALLED UNDERWATER to prevent
Cord
20 ft
light from overheating
Cord Termination
OSLO WHITE—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
Environment
Water temperature : -4°~104°F
Less than 1 meter depth
PHOTOMETRICS
DIMENSIONS
24w / 15°
19.2
1.8m
1.8m
8.5
2.8m
2.8m
4.8
3.7m
3.7m
4.5m
4.5m
3.1

10m
0.9m


8m
0.9m
ø7.1”
7.83”
6m
76.9
 1.5”

11.1”
4m
H
V Spread : 25.3m
H Spread : 25.3m
Height
 2.8” 
Model Number
LED Array
Input
Voltage
MR6-L122-2DWA-S-20HW
12 x 2W
24VDC
MR6-L122-2DCA-S-20HW
12 x 2W
MR6-L122-2DXB-S-201M
12 x 2W
→Table of Contents
→Return to Main Page
→Contact illuminFx

2m
V

Intensity (foot candles)
15 Degree Beam
Warm White
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
15°
2-wire
25W
950
24VDC
Cool White
6000K
15°
2-wire
25W
1219
24VDC
RGB
25°
Male QC Plug
33.6W
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
25
underwater
R I O | oslo
MANTA RAY
12W LED
MR7
SPECIFICATIONS
SPECIAL ORDER
allow extended lead time
MANTA RAY MR7 :
Housing & Bracket
316# stainless steel
Front Cover
316L# stainless steel
Glass
Step-tempered clear glass T=5mm
The MANTA RAY MR7 underwater fixtures is a linear articulating
Cable Gland
IP68 PG-11 copper and nickel coated
Waterproof Seal
Molded shaped silicon seal under front cover
Silicon glue encasing LEDs, lens and PCB
PCB
Coefficient of heat conductivity≥2.0w/mk
Lens
Optical lens efficiency ≥85%
Driver
Single color—1 circuit
RGB 3in1—3 circuits
Cord
20 ft
Cord Termination
OSLO WHITE—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
Environment
Water temperature : -4°~104°F
Less than 1 meter depth
LED fixture. Its design allows for a wider beam spread for jobs
where more of a flood type fixture is required. The mounting
bracket allows for easy angled adjustments.
•
5–year warranty
•
Long life : 50,000 hours
•
NOTE : MUST BE INSTALLED UNDERWATER to prevent
light from overheating
PHOTOMETRICS
DIMENSIONS
12w / 30°
6m
8m
10m
1.1m
1.1m
5.8
2.3m
2.3m
2.5
3.4m
3.4m
1.4
4.6m
4.6m
5.7m
5.7m
0.9

8.3”


23
 2.56” 
4m
H
.36”
2m
V
2
Intensity (foot candles)
30 Degree Beam
Warm White
V Spread : 31.8m
H Spread : 31.8m
Height
LED Array
Input
Voltage
MR7-L62-1AWB-S-20HW
6 x 2W
12VAC
MR7-L62-1ACB-S-20HW
6 x 2W
MR7-L62-2DXB-S-201M
6 x 2W
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
30°
2-wire
11.3W
520
12VAC
Cool White
6000K
30°
2-wire
11.3W
605
24VDC
RGB
30°
Male QC Plug
14.9W
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
26
underwater
R I O | oslo
MANTA RAY
8/18W LED
MR8
SPECIFICATIONS
INTERNAL DMX
MANTA RAY MR8 :
Housing & Trim Ring
Stainless steel 304
Cable Gland
IP68 imported
Environment
up to 5m depth
The MANTA RAY MR8 underwater fixtures is a round articulating
Cover Lens
10mm thick tempered glass
LED
CREE High Powered w/optical lens
The mounting bracket allows for easy angled adjustments.
Driver
Single color—1 circuit
RGB 3in1—3 circuits
•
5–year warranty
•
Long life : 50,000 hours
Cord
OSLO Warm White—(1)18/2 @ 6ft
RIO RGB—(2)18/2 @ 6ft
•
NOTE : MUST BE INSTALLED UNDERWATER to prevent
Cord Termination
OSLO Warm White—(1)Tinned wire ends
RIO RGB—(2)Tinned wire ends
LED fixture. Its design allows it to be used as an underwater
spot light for water features such as fountains and waterfalls.
light from overheating
PHOTOMETRICS
DIMENSIONS
Model Number
LED Array
Input
Voltage
MR8-L615-1AWB-S-06HW
6 x 1.5W
12VAC
MR8-L615-1ACB-S-06HW
6 x 1.5W
MR8-L63-2DXB-S-06HW
6 x 3W
→Table of Contents
→Return to Main Page
→Contact illuminFx
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
25°
2-wire
8W
540
12VAC
Cool White
6000K
25°
2-wire
8W
660
24VDC
RGB
25°
(2) 2-wire
19W
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
27
28-41
ingrade
fi x t u resa
29
Casper/Sydney
37 Tuscon
→Table of Contents
→Return to Main Page
→Contact illuminFx
39
Billings
40
Aspen
illuminFx reserves the right to make changes
to specifications at any time with or without notice
28
in grade
R I O | oslo
CASPER
IG2
3W LED
SPECIFICATIONS
Mounting Sleeve
included with each IG2
CASPER IG2 :
Housing
Die cast aluminum, gray powder coat
Trim Ring
316# stainless steel
Glass
Step-tempered clear glass T=7mm
The CASPER IG2 Series of LED In Grade fixtures are perfect
Loading Capacity
Exert force of Ø2/5=1362 pounds
Lens
Optical lens efficiency ≥85%
Cable Gland
IP68 PG-9 copper and nickel coated
Waterproof Seal
Molded shaped double silicone seal
LED
TO power type
Driver
Single color—1 circuit
RGB 3in1—3 circuits
Cord
6 ft
Cord Termination
OSLO Warm White—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
Mounting Sleeve
011 PVC
for any hardscape illumination application. This compact, yet
powerful 3W fixture is great for retaining walls, columns, and
even small plants. Comes with optional PVC mounting sleeve.
•
5–year warranty
•
Long life : 50,000 hours
PHOTOMETRICS
3w / 30°
Intensity (foot candles)
30 Degree Beam
Warm White
4m
8m
7.6
0.9m
0.9m
2.0
1.8m
1.8m
0.84
2.7m
2.7m
0.41
3.6m
3.6m
4.5m
4.5m
0.31
V Spread : 25.4m
H Spread : 25.4m
Height
2m
4m
6m
8m
10m
V
H
4.5
0.8m
0.8m
1.15
1.5m
1.5m
0.51
2.3m
2.3m
0.29
3.8m
3.1m
4.5m
4.6m
0.16
Input
Voltage
IG2-L13-1AWC-S-06HW
1 x 3W
12VAC
IG2-L13-1AWW-S-06HW
1 x 3W
IG2-L13-2DXC-S-061M
IG2-L13-2DXW-S-061M
→Table of Contents
→Return to Main Page
→Contact illuminFx

2.16 “ 
V Spread : 21.4m
H Spread : 21.8m
Height
LED Array
Model Number
3w / 45°x30°
Intensity (foot candles)
Asymmetrical Beam
Warm White

10m
H
2.83”
6m
V

2m
DIMENSIONS
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
30°
2-wire
2.5W
65
12VAC
Warm White
3000K
ASY
45°x35°
2-wire
2.5W
65
1 x 3W
24VDC
RGB
30°
Male QC Plug
3.5W
Variable
1 x 3W
24VDC
RGB
ASY
45°x35°
Male QC Plug
3.5W
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
29
in grade
R I O | oslo
CASPER
IG3
6W LED
SPECIFICATIONS
CASPER IG3 :
Housing
Die cast aluminum, gray powder coat
Trim Ring
316# stainless steel
Glass
Step-tempered clear glass T=8mm
The CASPER IG3 Series of LED In Grade fixtures are perfect
Loading Capacity
Exert force of Ø2/5=2021 pounds
Cable Gland
IP68 PG-9 PVC
Waterproof Seal
Molded shaped double silicone seal
LED
TO power type
Driver
Single color—1 circuit
RGB 3in1—3 circuits
Cord
20 ft
Cord Termination
OSLO Warm White—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
Mounting Sleeve
015 PVC
for any hardscape illumination application. This compact, yet
powerful 6W fixture is great for pergolas, columns, building
facades, and different types of plants.
•
5–year warranty
•
Long life : 50,000 hours
DIMENSIONS
PHOTOMETRICS
6w / 30°
1.17
2.1m
2.1m
0.65
2.8m
2.8m
4.2m
4.2m
0.43
4m
6m
8m
1.0m
0.7m
1.8
2.0m
1.3m
0.8
3.0m
2.0m
0.42
4.0m
2.7m
4.9m
3.3m
0.3
V Spread : 27.8m
H Spread : 18.8m
Height
LED Array
Input
Voltage
IG3-L32-1AWC-S-20HW
3 x 2W
12VAC
IG3-L32-1AWW-S-20HW
3 x 2W
IG3-L32-2DXC-S-201M
IG3-L32-2DXW-S-201M
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
2.75”



10m
7.3

V Spread : 19.7m
H Spread : 20.0m
Height
2m
5.9”
1.4m
3.81”
10m
0.7m
1.4m

8m
0.7m
2.63
H


6m
10.5
V
ø4.0”


2.87”
4m
H
4.56”


2m
V
6w / 45°x35°
Intensity (foot candles)
Asymmetrical Beam
Warm White

Intensity (foot candles)
30 Degree Beam
Warm White

ø2.9”

Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
30°
2-wire
5.6W
376
12VAC
Warm White
3000K
ASY
45°x35°
2-wire
5.6W
376
3 x2W
24VDC
RGB
30°
Male QC Plug
7.7W
Variable
3 x 2W
24VDC
RGB
ASY
45°x35°
Male QC Plug
7.7W
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
30
in grade
R I O | oslo
SYDNEY
IG3C
3W LED
SPECIFICATIONS
SPECIAL ORDER
Housing/Trim Ring
316L# stainless steel
SYDNEY IG3C :
Glass
Step-tempered clear glass T=8mm
Lens
Optical lens efficiency ≥85%
Cable Gland
IP68 PG-11 PVC
The Sydney IG3C Series of LED In Grade fixtures are perfect for
Waterproof Seal
Molded shaped double silicone seal
Loading Capacity
Exert force area of ø2/5=1096kg
This compact, yet powerful 3W fixture is great for retaining
PCB
Excellent heat conductivity aluminum
Coefficient of Heat Conductivity ≥2.0w/mk
walls, columns, and even small plants. Comes with optional
Driver
Single color—1 circuit
RGB 3in1—3 circuits
Cord
20 ft
Cord Termination
OSLO Warm White—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
Mounting Sleeve
058 PVC
allow extended lead time
any hardscape illumination application. This series of fixtures
also is tested and rated for high humidity and high alkali sites.
PVC mounting sleeve.
•
5–year warranty
•
Long life : 50,000 hours
DIMENSIONS
PHOTOMETRICS
3w / 45°x35°
Beam Width
V
H
6m
8m
0.7m
0.9m
1.7
1.3m
1.7m
.75
2.0m
2.6m
.42
2.7m
3.5m
3.3m
4.4m
.27
10m


ø5“

4.72“ 
4m
6.8
ø5.31“

2m

2.28“
Intensity (foot candles)
Asymmetrical
Warm White
V Spread : 18.9m
H Spread : 24.6m
Height
LED Array
Input
Voltage
IG3C-L31-1AWC-S-20HW
3 x 1W
12VAC
IG3C-L31-1AWW-S-20HW
3 x 1W
IG3C-L31-2DXB-S-201M
IG3C-L31-2DXW-S-201M
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
30°
2-wire
3.6W
224
12VAC
Warm White
3000K
ASY
45°x35°
2-wire
3.6W
224
3 x 1W
24VDC
RGB
25°
Male QC Plug
4.6W
Variable
3 x 1W
24VDC
RGB
ASY
45°x35°
Male QC Plug
4.6W
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
31
in grade
R I O | oslo
CASPER
IG4
12W LED
SPECIFICATIONS
CASPER IG4 :
Housing
Die cast aluminum, gray powder coat
Trim Ring
316# stainless steel
Glass
Step-tempered clear glass T=8mm
The CASPER IG4 Series of LED In Grade fixtures are perfect
Loading Capacity
Excert force of Ø2/5=2467 pounds
Cable Gland
IP68 PG-9 PVC
Waterproof Seal
Molded shaped double silicone seal
LED
Single color— CREE XP-E
RGB 3in1—TO power
Driver
Single color—1 circuit
RGB 3in1—3 circuits
Cord
20 ft
Cord Termination
OSLO Warm White—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
Mounting Sleeve
016 PVC
for any hardscape illumination application. This compact, yet
powerful 12W fixture is great for larger wall washing jobs.
•
5–year warranty
•
Long life : 50,000 hours
PHOTOMETRICS
12w / 30°
Intensity (foot candles)
30 Degree Beam
Warm White
1.4m
12.6
2.1m
2.1m
7.1
2.9m
2.9m
4.5
3.6m
3.6m
V Spread : 20.2m
H Spread : 20.2m
Height
2m
4m
6m
8m
10m
22.8
0.9m
0.6m
5.7
1.8m
1.3m
2.5
2.6m
2.0m
1.4
3.5m
2.5m
0.9
5.3m
3.8m
LED Array
Input
Voltage
IG4-L62-1AWC-S-20HW
6 x 2W
12VAC
IG4-L62-1AWW-S-20HW
6 x 2W
IG4-L62-2DXC-S-201M
IG4-L62-2DXW-S-201M
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
ø4.5”

V Spread : 24.8m
H Spread : 17.8m
Height
ø6.81”




ø4.67”
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
30°
2-wire
13.5W
783
12VAC
Warm White
3000K
ASY
45°x35°
2-wire
13.5W
783
6 x2W
24VDC
RGB
30°
Male QC Plug
16.8W
Variable
6 x 2W
24VDC
RGB
ASY
45°x35°
Male QC Plug
16.8W
Variable
Color


0.7m
1.4m
ø6.25”

5.89”
10m
0.7m
28.3
H

8m
113.5
V
3”
6m
H

4m
V
12w / 45°x35°
Intensity (foot candles)
Asymmetrical Beam
Warm White

2m
DIMENSIONS
illuminFx reserves the right to make changes
to specifications at any time with or without notice

32
in grade
R I O | oslo
SYDNEY
IG4C
6W LED
SPECIFICATIONS
SPECIAL ORDER
Housing/Trim Ring
316L# stainless steel
SYDNEY IG4C :
Glass
Step-tempered clear glass T=8mm
Lens
Optical lens efficiency ≥85%
Cable Gland
IP68 PG-11 PVC
The Sydney IG4 Series of LED In Grade fixtures are perfect for
Waterproof Seal
Molded shaped double silicone seal
Loading Capacity
Exert force area of ø2/5=1096kg
This compact, yet powerful 6W fixture is great for retaining
PCB
Excellent heat conductivity aluminum
Coefficient of Heat Conductivity ≥2.0w/mk
walls, columns, and even small plants. Comes with optional
Driver
Single color—1 circuit
RGB 3in1—3 circuits
Cord
20 ft
Cord Termination
OSLO Warm White—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
Mounting Sleeve
058 PVC
allow extended lead time
any hardscape illumination application. This series of fixtures
also is tested and rated for high humidity and high alkali sites.
PVC mounting sleeve.
•
5–year warranty
•
Long life : 50,000 hours
PHOTOMETRICS
DIMENSIONS
6w / 45°x35°
Beam Width
V
H
6m
8m
0.9m
6.5
1.3m
1.7m
2.9
2.0m
2.6m
1.6
2.7m
3.5m
3.3m
4.4m
1.0
10m

ø6.14“
4.72“ 
4m
0.7m


2m
26
ø7“

2.12“
Intensity (foot candles)
Asymmetrical
Warm White
V Spread : 18.9m
H Spread : 24.6m
Height
LED Array
Input
Voltage
IG4C-L61-1AWC-S-20HW
6 x 1W
12VAC
IG4C-L61-1AWW-S-20HW
6 x 1W
IG4C-L61-2DXB-S-201M
IG4C-L61-2DXW-S-201M
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
30°
2-wire
13.5W
783
12VAC
Warm White
3000K
ASY
45°x35°
2-wire
13.5W
783
6 x 1W
24VDC
RGB
25°
Male QC Plug
16.8W
Variable
6 x 1W
24VDC
RGB
ASY
45°x35°
Male QC Plug
16.8W
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
33

in grade
R I O | oslo
CASPER
IG5
24W LED
SPECIFICATIONS
Housing
12# Die cast aluminum, gray powder coat
Trim Ring
316# stainless steel
Glass
Step-tempered clear glass T=8mm
Lens
Optical lens efficiency ≥85%
The Casper IG5 Series of LED In Grade fixtures are perfect
Cable Gland
IP68 PG-9 PVC
for any hardscape illumination application. This high output
Waterproof Seal
EPDM packing w/Silicon rubber gasket
24W fixture is great for lighting up larger applications such
LED
TO power type | Single color is OSRAM
Driver
Single color—2 circuit
RGB 3in1—6 circuits
SPECIAL ORDER
allow extended lead time
CASPER IG5 :
as building facades, large columns, and trees. Comes with
optional PVC mounting sleeve.
•
Long life : 50,000 hours
Cord
20 ft
•
5 year warranty
Cord Termination
OSLO Warm White—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
Mounting Sleeve
057 PVC
Loading Capacity
ø2/5=1728lbs
PHOTOMETRICS
DIMENSIONS
24w / 45°x35°
Beam Width
V
H
4m
6m
8m
0.8m
0.6m
5.8
1.7m
1.2m
2.5
2.5m
1.9m
1.5
3.4m
3.1m
5.1m
3.7m
0.9
10m

ø7.28“


ø6.73“

 ø4.72“ 
2m
23.2
 2.95“ 
Intensity (foot candles)
Asymmetrical
Warm White
V Spread : 23.9m
H Spread : 17.7m
Height
LED Array
Input
Voltage
IG5-L122-1AWC-S-06HW
12 x 2W
12VAC
Warm White
3000K
IG5-L122-1AWW-S-20HW
12 x 2W
12VAC
Warm White
3000K
IG5-L122-2DXC-S-201M
12 x 2W
24VDC
IG5-L122-2DXW-S-201M
12 x 2W
24VDC
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
30°
2-wire
21.4W
1269
ASY
45°x35°
2-wire
21.4W
1269
RGB
30°
Male QC Plug
20W
Variable
RGB
ASY
45°x35°
Male QC Plug
20W
Variable
Color
•
•
illuminFx reserves the right to make changes
to specifications at any time with or without notice
34
in grade
COB oslo
AUSTIN
IG8
5W LED
SPECIAL ORDER (square trim)
allow extended lead time
SPECIFICATIONS
AUSTIN IG8 :
Housing
Die cast aluminum, gray powder coat
Trim Ring
316# stainless steel
Glass
Step-tempered clear glass T=7mm
The AUSTIN IG8 Series of LED In Grade fixtures are great for
Loading Capacity
Exert force of Ø2/5=1320 pounds
Lens
Optical lens efficiency ≥90%
Cable Gland
Molded shaped silicone seal
Waterproof Seal
Molded shaped silicone seal
up-lighting applications. The COB LEDs provide even more
lumen output per watt so you can get a greater light output in
an extremely small lighting fixture. The IG8 series comes in
both square and round trim rings.
•
5–year warranty
LED
Multi chip on board LED
•
Long life : 50,000 hours
Driver
Single color—1 circuit
Cord
6 ft
Cord Termination
OSLO Warm White—Tinned wire ends
Mounting Sleeve
065 PVC
PHOTOMETRICS
DIMENSIONS
5w / 30°
8m
10m
2.1m
2.1m
2.0
3.1m
3.1m
1.1
4.2m
4.2m
0.7
5.2m
5.2m

4.6
5.24“
1.0m

1.0m
 3.46“ 
 ø1.9“ 

6m
18.2
2.32“
 ø2.75“ 
3.2“
4m
H

2m
V
 3.46“ 
Intensity (foot candles)
30 Degree Beam
Warm White

5.35“
V Spread : 29.1m
H Spread : 29.1m
Height
LED Array
Input
Voltage
IG8-L15-1AWC-S-06HW
1 x 5W
12VAC
IG8S-L15-1AWC-S-06HW
1 x 5W
12VAC
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
Beam
Angle
Trim
Ring
Max
Power
LUM
Flux
Warm White
3000K
30°
Round
4.8W
294
Warm White
3000K
30°
Square
4.8W
294
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
35

in grade
COB oslo
AUSTIN
IG9
6W LED
SPECIFICATIONS
SPECIAL ORDER
allow extended lead time
AUSTIN IG9 :
Housing
Die cast aluminum, gray powder coat
Trim Ring
316L# stainless steel
Glass
Step-tempered clear glass T=7mm
The AUSTIN IG9 Series of LED In Grade fixtures are great for
Loading Capacity
Excert force of Ø2/5=2021 pounds
Lens
Optical lens efficiency ≥90%
Cable Gland
IP68 PG-9 PVC
Waterproof Seal
Molded shaped double silicone seal
up-lighting applications. The COB LEDs provide even more
lumen output per watt so you can get a greater light output in
an extremely small lighting fixture. The IG9 series comes in
both square and round trim rings.
•
5–year warranty
LED
Multi chip on board LED
•
Long life : 50,000 hours
Driver
Single color—1 circuit
Cord
6 ft
Cord Termination
OSLO Warm White—Tinned wire ends
Mounting Sleeve
015 PVC
PHOTOMETRICS
DIMENSIONS
6w / 30°
8m
10m
0.9m
4.8
1.8m
1.8m
2.1
2.7m
2.7m
1.2
3.6m
3.6m
0.8
4.5m
4.5m
 ø4.56“ 

4.56“ 

4“ 

0.9m
5.9“
6m
19.4

4m
H
 2.9“ 
2m
V
3.46“ 
  4.56“
Intensity (foot candles)
25 Degree Beam
Warm White
ø2.9“
V Spread : 25.5m
H Spread : 25.5m
Height
LED Array
Input
Voltage
IG9-L16-1AWB-S-06HW
1 x 6W
12VAC
IG9S-L16-1AWB-S-06HW
1 x 6W
12VAC
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
Beam
Angle
Trim
Ring
Max
Power
LUM
Flux
Warm White
3000K
30°
Round
6.5W
402
Warm White
3000K
30°
Square
6.5W
402
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
36
in grade
oslo
TUCSON
IG13
.5/2W LED
SPECIFICATIONS
TUCSON IG13 :
The TUCSON IG13 Series of LED In Grade fixtures are great
marker lights for any location. These compact, wide beam
spread LED fixtures put out a nice soft indirect light that makes
them perfect to lay down for pathways to mark out the path.
Comes with optional PVC mounting sleeve.
Housing
Die cast aluminum, gray powder coat
Trim Ring
316# stainless steel
Glass
Step-tempered clear glass T=5mm
Loading Capacity
Exert force of Ø2/5=250 pounds
Lens
Optical lens efficiency ≥85%
Cable Gland
IP68 PG-9 copper and nickel coated
Waterproof Seal
Molded shaped double silicone seal
•
5–year warranty
LED
0.5W—CREE XP-E
2W—OSRAM
•
Long life : 50,000 hours
Driver
Single color—1 circuit
Cord
6 ft
Cord Termination
OSLO Warm White—Tinned wire ends
Mounting Sleeve
032 PVC
PHOTOMETRICS
DIMENSIONS
2w / 120°
4.5m
4.5m
0.03
6.7m
6.7m
0.02
8.9m
8.9m
0.01
11.1m
11.1m
 1“ 

V Spread : 59m
H Spread :59m
Height
Model Number
LED Array
Input
Voltage
IG13-L1.5-1AWF-S-06HW
1 x .5W
12VAC
IG13S-L1.5-1AWF-S-06HW
1 x .5W
IG13-L12-1AWF-S-06HW
IG13S-L12-1AWF-S-06HW
→Table of Contents
→Return to Main Page
→Contact illuminFx
 1.5“ 
 1.5“ 
0.07

10m
2.2m

8m
2.2m
3.3“
6m
0.3
 1.34“
 1.5“ 
2.6“
4m
H

2m
V

Intensity (foot candles)
120 Degree Beam
Warm White
2“

Beam
Angle
Trim
Ring
Max
Power
LUM
Flux
Warm White
3000K
120°
Round
0.8W
9.6
12VAC
Warm White
3000K
120°
Square
0.8W
9.6
1 x 2W
12VAC
Warm White
3000K
120°
Round
2.5W
25
1 x 2W
12VAC
Warm White
3000K
120°
Square
2.5W
25
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
37
in grade
oslo
TUCSON
IG14
.5/2W LED
SPECIFICATIONS
TUCSON IG14 :
The TUCSON IG14 Series of LED In Grade fixtures are great
marker lights for any location. These compact, wide beam
spread LED fixtures put out a nice soft indirect light that makes
them perfect to lay down for pathways to mark out the path.
Comes with optional PVC mounting sleeve.
Housing
Die cast aluminum, gray powder coat
Trim Ring
316# stainless steel
Glass
Step-tempered clear glass T=5mm
Loading Capacity
Exert force of Ø2/5=250 pounds
Lens
Optical lens efficiency ≥85%
Cable Gland
IP68 PG-9 copper and nickel coated
Waterproof Seal
Molded shaped double silicone seal
•
5–year warranty
LED
0.5W—CREE XP-E
2W—OSRAM
•
Long life : 50,000 hours
Driver
Single color—1 circuit
Cord
6 ft
Cord Termination
OSLO Warm White—Tinned wire ends
Mounting Sleeve
032 PVC
PHOTOMETRICS
DIMENSIONS
2w / 120°
4.5m
4.5m
0.03
6.7m
6.7m
0.02
8.9m
8.9m
11.1m
11.1m
0.01
 1.75“ 

 1.4“ 
2.6“
 1.75“ 
0.07

10m
2.2m

8m
2.2m
3.3“
6m
0.3
1.65“
 1.75“ 
2.6“
4m
H

2m
V

Intensity (foot candles)
120 Degree Beam
Warm White

V Spread : 59m
H Spread :59m
Height
Model Number
LED Array
Input
Voltage
IG14-L1.5-1AWF-S-06HW
1 x .5W
12VAC
IG14S-L1.5-1AWF-S-06HW
1 x .5W
IG14-L12-1AWF-S-06HW
IG14S-L12-1AWF-S-06HW
→Table of Contents
→Return to Main Page
→Contact illuminFx
Beam
Angle
Trim
Ring
Max
Power
LUM
Flux
Warm White
3000K
120°
Round
0.8W
9.6
12VAC
Warm White
3000K
120°
Square
0.8W
9.6
1 x 2W
12VAC
Warm White
3000K
120°
Round
2.5W
25
1 x 2W
12VAC
Warm White
3000K
120°
Square
2.5W
25
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
38
in grade
R I O | oslo
BILLINGS
IG15
15/40W LED
SPECIFICATIONS
pending
BILLINGS IG15 :
Housing
Die cast aluminum
Trim Ring
Stainless steel
Glass
Step-tempered clear glass
The BILLINGS IG15 Series of LED In Grade fixtures are the
Loading Capacity
4400 pounds
Lens
Optical lens efficiency ≥80%
Cable Gland
IP68 PG-9 copper and nickel coated
Waterproof Seal
Molded shaped double silicone seal
Input Voltage
Single Color—12VAC
RGB 3in1—24VDC
Driver
Single color—1 circuit
RGB 3in1—3 circuits
Cord
3 ft
Mounting Sleeve
PVC
industry’s first integrated, adjustable beam luminaire. This
allows for tremendous flexibility for lighting applications. The
IG15 can be adjusted up to 15˚ off of center. 3in1 RGB has
internal DMX for easy wiring. *Also available in 100-240VAC,
inquire for more information.
•
Long life : 50,000 hours
•
5 year warranty
PHOTOMETRICS
DIMENSIONS
ø8.66“
ø8.26“
ø8.19“
7.91“
7.87“
6.5“
ø9.53“
ø9.29“
LED Array
Input
Voltage
IG15-L1215-1AWA-S-03HW
12 x 1.5W
12VAC
IG15-L1215-1AWB-S-03HW
12 x 1.5W
IG15-L1215-2DXB-S-03HW-DMX
IG15-L123-2DXB-S-03HW-DMX
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
Beam
Angle
LUM
Flux
Warm White
3000K
8°
1080
12VAC
Warm White
3000K
25°
1080
12 x 1.5W
24VDC
RGB
25°
Variable
12x 3W
24VDC
RGB
25°
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
39
in grade
oslo
ASPEN
SL2
2W LED
SPECIFICATIONS
ASPEN SL2 :
Housing
12# Die-cast powder coated aluminum
Front Cover
316# stainless steel
Operating temp
-20°C~40°C
The Aspen SL2 Series of LED In Grade fixtures are perfect for
Loading Capacity
>4400 lbs
Cable Gland
IP68 PG-9 PVC
Waterproof Seal
Molded shaped double silicone seal
LED
TO power type
Driver
Constant Current Output
pathway illumination, or turn them on their side to light up
small walls or railings. They come in 3 different styles with
different outputs which gives you flexibility for almost any job
application. Perfect for path lights and step lights. Comes with
optional mounting sleeve for easy installation.
•
5–year warranty
Cord
6 ft
•
Long life : 50,000 hours
Cord Termination
OSLO Warm White—Tinned wire ends
Mounting Sleeve
011 PVC
DIMENSIONS
1.89"


3”
3.85”


 2.2” 

3.15"

SL2 w/Optional Mounting Sleeve
LED Array
Input
Voltage
SL2-L12-1AW1-S-20HW
1 x 2W
12VAC
SL2-L12-1AW2-S-20HW
1 x 2W
SL2-L12-1AW4-S-20HW
1 x 2W
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
# of
Openings
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
1
2-wire
2.6W
1.3
12VAC
Warm White
3000K
2
2-wire
2.6W
1.7
12VAC
Warm White
3000K
4
2-wire
2.6W
1.7
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
40
in grade
oslo
ASPEN
SL4
LED
SPECIFICATIONS
ASPEN SL4 :
Housing
12# Die-cast powder coated aluminum
Front Cover
316# stainless steel
Operating Temp
-20°C~40°C
The Aspen SL4 Series of LED In Grade fixtures are perfect for
Loading Capacity
>4400 lbs
Cable Gland
IP68 PG-9 PVC
Waterproof Seal
Molded shaped double silicone seal
LED
TO power type
Driver
Constant Current Output
pathway illumination, or turn them on their side to light up
small walls or railings. They come in 3 different styles with
different outputs which gives you flexibility for almost any job
application. Comes with optional mounting sleeve for easy
installation.
•
5–year warranty
Cord
20 ft
•
Long life : 50,000 hours
Cord Termination
OSLO Warm White—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
Mounting Sleeve
127# PVC
DIMENSIONS
ø6.65"


 4.2” 
ø6.22" 
 5.16” 


ø4.41" 
SL4 w/Optional Mounting Sleeve
LED Array
Input
Voltage
SL4-L15-1AW1-S-201M
10 x .5W
12VAC
SL4-L25-1AW2-S-201M
20 x .5W
SL4-L25-1AW4-S-201M
24 x .5W
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
# of
Openings
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
1
2-wire
0.8W
85
12VAC
Warm White
3000K
2
2-wire
1.6W
85
12VAC
Warm White
3000K
4
2-wire
1.7W
85
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
41
28-41
landscape
fi x t u res
→Table of Contents
→Return to Main Page
→Contact illuminFx
43
Ventura
45
Vineyard
46
Huron
47
Laredo
49
Eco
50
Corsica
52
Vienna
53
Madrid
54
Corsica
55
Tampa
illuminFx reserves the right to make changes
to specifications at any time with or without notice
42
landscape
R I O | oslo
VENTURA
LS5
12W LED
SPK-3B
optional mounting stake
SPECIFICATIONS
VENTURA LS5 :
Housing
12# Die-cast powder coated aluminum
Bracket
Powder coated aluminum
Glass
Step-tempered clear glass T=4mm
The VENTURA LS5 landscape fixture is perfect for spot lighting
Lens
All in one optical, efficiency ≥85%
Cable Gland
IP68 PG-9 PVC
Gasket
Tooling shaped seal
Spike
Powder coated die-cast aluminum
applications in any outdoor project. Achieve beautiful color
changing effects on building facades, trees, sculptures, and
other architectural elements. Very easy to install with optional
mounting stake (SPK-3B).
•
5–year warranty
Driver
Single Color—1 circuit
RGB 3in1—3 circuits
•
Long life : 50,000 hours
Cord
20 ft
Cord Termination
Oslo Warm White—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
PHOTOMETRICS
DIMENSIONS
12w / 30°
8m
10.2
2.1m
2.1m
5.8
2.8m
2.8m
3.5m
3.5m
3.7

1.4m
11"
1.4m
ø5.
23


0.7m
5"

10m
0.7m
ø1.9"
3.8
12.1”
6m
92

7.56"
4m
H

2m
V

Intensity (foot candles)
30° Beam
Warm White

V Spread : 19.7m
H Spread : 19.7m
Height
LED Array
Input
Voltage
LS5-L62-1AWA-DG-20HW
6 x 2W
12VAC
LS5-L62-1AWC-DG-20HW
6 x 2W
LS5-L62-2DXA-DG-201M
LS5-L62-2DXC-DG-201M
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
15°
2-wire
13W
680
12VAC
Warm White
3000K
30°
2-wire
13W
680
6 x 2W
24VDC
RGB
15°
Male QC Plug
16.8W
Variable
6 x 2W
24VDC
RGB
30°
Male QC Plug
16.8W
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
43
landscape
R I O | oslo
VENTURA
LS6
24W LED
SPK-3B
optional mounting stake
SPECIFICATIONS
SPECIAL ORDER
allow extended lead time
VENTURA LS6 :
Housing
12# Die-cast powder coated aluminum
Bracket
Powder coated aluminum
Glass
Step-tempered clear glass T=4mm
The VENTURA LS6 landscape fixture is perfect for spot lighting
Lens
All in one optical, efficiency ≥85%
Cable Gland
IP68 PG-9 PVC
Gasket
Tooling shaped seal
Spike
Powder coated die-cast aluminum
applications in any outdoor project. Achieve beautiful color
changing effects on building facades, trees, sculptures, and
other architectural elements. Very easy to install with optional
mounting stake (SPK-3B).
•
5–year warranty
Driver
Single Color—1 circuit
RGB 3in1—3 circuits
•
Long life : 50,000 hours
Cord
20 ft
Cord Termination
Oslo Warm White—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
PHOTOMETRICS
DIMENSIONS
0.7m
38.6
1.0m
1.0m
1.2m
1.2m
24.7

0.5m
0.7m
2"
0.5m
68.6
ø6.2
154

0.2m

10m
0.2m
12.1”
8m
617


6m
H
ø1.9"
7.75"
4m
V
5.8"

2m

24w / 6°
Intensity (foot candles)
6° Beam
Warm White

V Spread : 6.9m
H Spread : 6.7m
Height
LED Array
Input
Voltage
LS6-L122-1AWA-DG-20HW
12 x 2W
12VAC
LS6-L122-1AWC-DG-20HW
12 x 2W
LS6-L122-2DXC-DG-201M
12 x 2W
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
6°
2-wire
24W
1385
12VAC
Warm White
3000K
30°
2-wire
24W
1385
24VDC
RGB
30°
Male QC Plug
33.6W
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
44
landscape
R I O | oslo
VINEYARD
LS7
10W LED
SPECIFICATIONS
SPECIAL ORDER
allow extended lead time
VINEYARD LS7 :
Housing
12# Die-cast powder coated aluminum
Bracket
Powder coated aluminum
Glass
Step-tempered clear glass T=4mm
The VINEYARD LS7 landscape stake fixture is a high powered
Lens
All in one optical, efficiency ≥85%
Cable Gland
IP68 PG-9 copper and nickel coated
Gasket
Molding shaped silicone double seal
LED
CREE XP-E
LED solution for almost any outdoor landscape lighting project.
Use it to light up building facades, trees, retaining walls, and
columns. Installation is quick and easy and the CREE XP-E LED
ensures for long lasting beautiful light.
•
5–year warranty
Driver
Single color—1 circuits
Rio RGB—3 circuits
•
Long life : 50,000 hours
Cord
20 ft
Cord Termination
Oslo Warm White—Tinned wire ends
RIO RGB—Male IP68 Quick-Connect
PHOTOMETRICS
DIMENSIONS
10w / 20°
6m
8m
10m
0.7m
0.7m
22
1.3m
1.3m
9.6
2.0m
2.0m
5.4
2.7m
2.7m
3.3m
3.3m
3.5

86
3“ 
 5.4
18.9“
4m
H
V Spread : 19.0m
H Spread : 19.1m
Height

2m
V
LED Array
Input
Voltage
LS7-L52-1AWB-BR-20HW
5 x 2W
12VAC
LS7-L52-2DXC-BR-201M
5 x 2W
24VDC
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
ø4
Intensity (foot candles)
20 Degree Beam
Warm White
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
20°
2-wire
10W
586
RGB
30°
Male QC Plug
10W
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
45
landscape
RIO
RGBW
HURON
LS11
24W LED
SPECIFICATIONS
SPECIAL ORDER
allow extended lead time
HURON LS11 :
Housing
12# Die-cast powder coated aluminum
Bracket
Powder coated aluminum
Glass
Step-tempered clear glass T=7mm
The HURON LS11 4in1 RGBW and the 3in1 RGB Landscape
Lens
All in one optical, efficiency ≥85%
Cable Gland
IP68 PG-9 PVC
Gasket
Tooling shaped seal
LED
TO power type
Driver
RGB 3in1—3 circuits
RGBW 4in1—4 circuits
Cord
20 ft
Cord Termination
RIO RGB—Male IP68 Quick-Connect
RIO RGBW—Male IP68 Quick-Connect
fixtures are perfect for spot lighting applications in any outdoor
project. Achieve beautiful color changing effects on building
facades, trees, sculptures, and other architectural elements.
•
5–year warranty
•
Long life : 50,000 hours
PHOTOMETRICS
Intensity (foot candles)
24 Degree Beam
Warm White
4m
8m
0.8m
0.8m
25.2
1.7m
1.6m
11.2
2.4m
2.4m
6.3
3.4m
3.4m
4.2m
4.2m
4.0
V Spread : 22.4m
H Spread : 22.4m
Height
2m
4m
6m
8m
10m
34
0.9m
0.9m
8.5
1.7m
1.6m
3.8
2.6m
2.6m
2.1
3.5m
3.5m
4.4m
4.4m
1.3
Input
Voltage
LS11-L122-1AWC-S-201M
12 x 2W
12VAC
LS11-L122-2DXB-S-201M
12 x 2W
LS11-L64-2DZA-S-201M
LS11-L64-2DZC-S-201M
→Table of Contents
→Return to Main Page
→Contact illuminFx
8”
2.75”
V Spread : 23.6m
H Spread : 23.6m
Height
LED Array
Model Number
1.

6.5”


10m
101
24w / 30°
Beam Width
V
H
Intensity (foot candles)
30 Degree Beam
RGBW Full
9.52”
6m
24w / 24°
Beam width
V
H

2m
DIMENSIONS
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
RGB
15°
Male QC Plug
25W
Variable
24VDC
RGB
30°
Male QC Plug
25W
Variable
6 x 4W
24VDC
RGBW
15°
Male QC Plug
32W
Variable
6 x 4W
24VDC
RGBW
30°
Male QC Plug
32W
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
46
landscape
R I O | oslo
LAREDO
LR1
4W LED
SHR-LR1
optional shroud
SPECIFICATIONS
INTERNAL DMX
LAREDO LR1 :
Housing
Die-cast powder coated aluminum Ral 7012
Bracket
Powder coated aluminum
Glass
Step-tempered clear glass
The LAREDO LR1 landscape fixture series are a perfect fixture
Lens
Optical PC Model
Cable Gland
IP68 PG-9 PVC
Gasket
Imported silicon and rubber
LED
TO power type
Driver
Single Color—1 circuits
RGB Discrete—3 circuits
Cord
OSLO Warm White—(1)18/2 @ 6ft
RIO RGB—(2)18/2 @ 6ft
Cord Termination
OSLO Warm White—(1)tinned wire ends
RIO RGB—(2)tinned wire ends
for landscape lighting. These lanscape lights features an
atriculating stem and easy mount base. Available in both warm
white (3000K) and discrete RGB color changing.
•
5–year warranty
•
Long life : 50,000 hours
•
Optional Accessories:
Shroud (SHR-LR1) Mounting Stake (STK-LR1)
PHOTOMETRICS
DIMENSIONS
LED Array
Input
Voltage
LR1-L31-1AWA-DG-06HW
3 x 1W
12VAC
LR1-L31-1AWC-DG-06HW
3 x 1W
LR1-L31-1AWW-DG-06HW
LR1-L31-2DXC-DG-06HW
Model Number
Beam
Angle*
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
15°
2-wire
4W
270
12VAC
Warm White
3000K
30°
2-wire
4W
270
3 x 1W
12VAC
Warm White
3000K
ASY
65°x30°
2-wire
4W
270
3 x 1W
24VDC
RGB
30°
(2) 2-wire
4.8W
Variable
Color
*other beam spreads may be available.
Inquire for more information
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
47
landscape
R I O | oslo
LAREDO
LR3
15W LED
SHR-LR3
optional shroud
SPECIFICATIONS
INTERNAL DMX
LAREDO LR3 :
Housing
Die-cast powder coated aluminum Ral 7012
Bracket
Powder coated aluminum
Glass
Step-tempered clear glass
The LAREDO LR3 landscape fixture series are a perfect fixture
Lens
Optical PC Model
Cable Gland
IP68 PG-9 PVC
Gasket
Imported silicon and rubber
LED
TO power type
Driver
Single Color—1 circuits
RGB Discrete—3 circuits
Cord
OSLO Warm White—(1)18/2 @ 6ft
RIO RGB—(2)18/2 @ 6ft
Cord Termination
OSLO Warm White—(1)tinned wire ends
RIO RGB—(2)tinned wire ends
for landscape lighting. These lanscape lights features an
atriculating stem and easy mount base. Available in both warm
white (3000K) and discrete RGB color changing.
•
5–year warranty
•
Long life : 50,000 hours
•
Optional Accessories:
Shroud (SHR-LR3) Mounting Stake (STK-LR3)
PHOTOMETRICS
DIMENSIONS
95
21.3
37.8
85.1
341
Model Number
LED Array
Input
Voltage
Beam
Angle*
Cord
Termination
Max
Power
LUM
Flux
LR3-L121-1AWA-DG-06HW
12 x 1W
12VAC
Warm White
3000K
8°
2-wire
15W
1080
LR3-L121-1AWC-DG-06HW
12 x 1W
12VAC
Warm White
3000K
25°
2-wire
15W
1080
LR3-L121-1AWW-DG-06HW
12 x 1W
12VAC
Warm White
3000K
ASY
65°x30°
2-wire
15W
1080
LR3-L121-2DXC-DG-06HW
12 x 1W
24VDC
RGB
25°
(2) 2-wire
18W
Variable
Color
*other beam spreads may be available.
Inquire for more information
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
48
landscape
RIO | RGB
ECO
EF20
20W LED
SPECIFICATIONS
ECO EF20 :
Housing
12# Die-cast aluminum
Glass
Tempered Glass
Frequency Range
50-60HZ
The ECO EF20 3in1 RGB Landscape fixture is perfect for flood
Operating Temp
-40°~60°C
Power Factor
0.95
LED
Epistar
building facades, trees, sculptures, and other architectural
Driver
RGB 3in1—3 circuits
elements.
Cord
20 ft
Cord Termination
RIO RGB—Male IP68 Quick-Connect
lighting applications in any outdoor project. The wide beam
spread of this product allow for large areas to be lit with one
single luminaire. Achieve beautiful color changing effects on
•
2–year warranty
•
Long life : 50,000 hours
ACCESSORIES
•
DIMENSIONS
Optional Mounting Stake
7” Front Face Width

6.0”
Model Number
LED Array
Input
Voltage
EF20-L120-2DXF-DG-201M
1 x 20W
24VDC
→Table of Contents
→Return to Main Page
→Contact illuminFx
Color
RGB
4.0



Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
120°
Male QC Plug
20W
Variable
illuminFx reserves the right to make changes
to specifications at any time with or without notice
49
landscape
R I O | oslo
CORSICA
WA1
12/24W LED
SPECIFICATIONS
SPECIAL ORDER
allow extended lead time
CORSICA WA1 :
Housing
Extruded Aluminum, powder coated
Bracket
Stainless steel T=1.5mm
Glass
Tempered clear glass T=4mm
The CORSICA WA1 LED fixture is illuminFx’s slim style linear
Lens
3 -in-1 optical lens, efficiency≥85%
Cable Gland
IP68 PG-9 PVC
Waterproof Seal
Glass and housing are silicone sealed
Operating Temp
4°F~104°F
Driver
oslo single color—1 circuit
RGB 3in1—3 circuits
Cord
20 ft
Cord Termination
oslo warm white—tinned wire ends
RIO RGB—Male IP68 Quick-Connect
S—Single input into WA1 fixture
D—one input and one output for simple daisy
chained connections
option. The CORSICA’s output makes it perfect for building
illumination, its streamlined design keeps it hidden, and its
mounting bracket makes it easy to install and adjust. Available
in light line version with through fixture input/output for easy
connections of up to three fixtures*.
•
5 year warranty
•
Long life : 50,000 hours
DIMENSIONS
MOUNTING
1.6”

WA1-L121—1.7’
WA1-L241—3.3’


3.1” 
 1.85” 
x* connection type
S — single connection
D — Through connection
Model Number
LED Array
Input
Voltage
WA1-L121-1AWC-S-20HW x*
12 x 1W
12VAC
WA1-L121-2DXC-S-201M x*
12 x 1.5W
WA1-L241-1AWC-S-20HW x*
WA1-L241-2DXC-S-201M x*
→Table of Contents
→Return to Main Page
→Contact illuminFx
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
30°
2 wire
14.5W
864
24VDC
RGB
35°
Male QC Plug
21W
Variable
24 x 1W
12VAC
Warm White
3000K
30°
2 wire
29W
1718
24 x 1.5W
24VDC
RGB
35°
Male QC Plug
42W
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
50
landscape
R I O | oslo
CORSICA
WA2
20/40W LED
SPECIFICATIONS
SPECIAL ORDER
allow extended lead time
CORSICA WA2 :
Housing
Extruded Aluminum, powder coated
Bracket
12# die-cast powder coated aluminum
Glass
Tempered clear glass T=3mm
The CORSICA WA2 LED fixture is illuminFx’s high output linear
Lens
3 -in-1 optical lens, efficiency≥85%
Cable Gland
IP68 PG-9 PVC
Waterproof Seal
Glass and housing are silicone sealed
Operating Temp
4°F~104°F
Driver
oslo single color—1 circuit
RGB 3in1—3 circuits
Cord
20 ft
Cord Termination
oslo warm white—tinned wire ends
RIO RGB—Male IP68 Quick-Connect
S—Single input into WA1 fixture
D—one input and one output for simple daisy
chained connections
option. The CORSICA’s output makes it perfect for building
illumination, its streamlined design keeps it hidden, and its
mounting bracket makes it easy to install and adjust. Available
in light line version with through fixture input/output for easy
connections of up to three fixtures*.
•
5 year warranty
•
Long life : 50,000 hours
DIMENSIONS
WA2-L102—1.7’
WA2-L202—3.3’

 2.6” 

MOUNTING
x* connection type
S — single connection
D — Through connection
2.1”
 3.3” 
Model Number
LED Array
Input
Voltage
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
WA2-L102-1AWA-S-20HW x*
10 x 2W
12VAC
Warm White
3000K
15°
2 wire
25W
1174
WA2-L102-1AWC-S-20HW x*
10 x 2W
12VAC
Warm White
3000K
30°
2 wire
25W
1174
WA2-L102-2DXC-S-201M x*
10 x 2W
24VDC
RGB
30°
Male QC Plug
33.6W
Variable
WA2-L202-1AWA-S-20HW x*
20 x 2W
12VAC
Warm White
3000K
15°
2 wire
50W
2308
WA2-L202-1AWC-S-20HW x*
20 x 2W
12VAC
Warm White
3000K
30°
2 wire
50W
2308
WA2-L202-2DXC-S-201M x*
20 x 2W
24VDC
RGB
30°
Male QC Plug
67.2W
Variable
→Table of Contents
→Return to Main Page
→Contact illuminFx
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
51
landscape
RGBW
VIENNA
24/48W LED
WA3
SPECIFICATIONS
SPECIAL ORDER
allow extended lead time
VIENNA WA3 :
Housing
Extruded Aluminum, powder coated
Bracket
12# die-cast powder coated aluminum
Glass
Tempered clear glass T=3mm
The VIENNA WA3 4 in one RGWB LED fixture is illuminFx’s high
Lens
4 -in-1 optical lens, efficiency≥85%
Cable Gland
IP68 PG-11 PVC
Waterproof Seal
Glass and housing are silicone sealed
Operating Temp
4°F~104°F
output RGBW linear option. Easily achieve smooth color change
with the option for a beautiful warm white as well. Available
in light line version with through fixture input/output for easy
connections of up to three fixtures*.
•
5 year warranty
Driver
RGBW 4in1—4 circuits
•
Long life : 50,000 hours
Cord
20 ft
Cord Termination
RIO RGBW—Male IP68 Quick-Connect
S—Single input into WA1 fixture
D—one input and one output for simple daisy
chained connections
DIMENSIONS
MOUNTING
WA3-L64—1.7’
WA3-L124—3.3’

 2.7” 

x* connection type
S — single connection
D — Through connection
 3.3” 
LED Array
Input
Voltage
WA3-L64-2DZC-DG-201M x*
6 x 4W
24VDC
WA3-L64-2DZX-DG-201M x*
6 x 4W
WA3-L124-2DZC-DG-201M x*
WA3-L124-2DZX-DG-201M x*
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
2.3”
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
RGBW
30°
Male QC Plug
32W
Variable
24VDC
RGBW
ASY
45°x35°
Male QC Plug
32W
Variable
12 x 4W
24VDC
RGBW
30°
Male QC Plug
64W
Variable
12 x 4W
24VDC
RGBW
ASY
45°x35°
Male QC Plug
64W
Variable
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
52
landscape
COB oslo
MADRID
WA4
24/48W LED
SPECIFICATIONS
SPECIAL ORDER
allow extended lead time
MADRID WA4 :
Housing
Extruded Aluminum, powder coated
Bracket
12# die-cast powder coated aluminum
Glass
Tempered clear glass T=3mm
The MADRID WA4 COB LED fixture is illuminFx’s highest output
Reflector
Optical reflector efficiency≥90%
Cable Gland
IP68 PG-9 PVC
Waterproof Seal
Glass and housing are silicone sealed
Operating Temp
4°F~104°F
LED
Multi chip onboard COB LED
Cord
20 ft
Cord Termination
oslo warm white—tinned wire ends
linear option. The COB LEDs provide even more lumen output
per watt so you can get a greater light output.
•
5 year warranty
•
Long life : 50,000 hours
DIMENSIONS
MOUNTING
WA4-L64—1.7’
WA4-L124—3.3’

 3.4” 

2.4”
 3.3” 
LED Array
Input
Voltage
WA4-L64-1AWB-DG-20HW
6 x 4W
12VAC
WA4-L124-1AWB-DG-20ZHW
12 x 4W
12VAC
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
Warm White
3000K
24°
2 wire
30W
1553
Warm White
3000K
24°
2 wire
60W
3094
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
53
landscape
R I O | oslo
CORSICA
WA5
32/60W LED
SPECIFICATIONS
SPECIAL ORDER
allow extended lead time
CORSICA WA5 :
Housing
Extruded Aluminum, powder coated
Bracket
Stainless steel T=1.5mm
Glass
Tempered clear glass T=4mm
The CORSICA WA9/10 linear LED fixture is illuminFx’s most
Lens
3 -in-1 optical lens, efficiency≥85%
Cable Gland
IP68 PG-11 PVC
Waterproof Seal
Glass and housing are silicone sealed
Operating Temp
4°F~104°F
Driver
oslo single color—1 circuit
RGB 3in1—3 circuits
Cord
20 ft
Cord Termination
oslo warm white—tinned wire ends
RIO RGB—Male IP68 Quick-Connect
powerful yet compact outdoor rated linear product. The
CORSICA’s output makes it perfect for building illumination and
its streamlined design keeps it hidden. Available in light line
version with through fixture input/output for easy connections
of up to three fixtures*.
•
5 year warranty
•
Long life : 50,000 hours
DIMENSIONS
MOUNTING
WA5
WA5 -L162—1
-L30
’
2—2
’
 4.3” 
 3.2” 
x* connection type
S — single connection
D — Through connection
Model Number
LED Array
Input
Voltage
Beam
Angle
Cord
Termination
Max
Power
LUM
Flux
WA5-L162-1AWA-S-20HW x*
16 x 2W
12VAC
Warm White
3000K
15°
2 wire
29W
1394
WA5-L162-1AWC-S-20HW x*
16 x 2W
12VAC
Warm White
3000K
30°
2 wire
29W
1394
WA5-L162-2DXC-S-201M x*
16 x 2W
24VDC
RGB
30°
Male QC Plug
32.7W
Variable
WA5-L302-1AWA-S-20HW x*
30 x 2W
12VAC
Warm White
3000K
15°
2 wire
57.6W
2730
WA5-L302-1AWC-S-20HW x*
30 x 2W
12VAC
Warm White
3000K
30°
2 wire
57.6W
2730
WA5-L302-2DXC-S-201M x*
30 x 2W
24VDC
RGB
30°
Male QC Plug
64.2W
Variable
→Table of Contents
→Return to Main Page
→Contact illuminFx
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
54
landscape
oslo
TP07
12
TAMPA
7/12W LED
SPECIFICATIONS
TAMPA 7/12W :
The TAMPA 7/12 watt line voltage landscape stake fixture is a
high powered LED solution for almost any outdoor landscape
lighting project. Use it to light up building facades, trees,
retaining walls, and columns. Installation is quick and easy
and the COB LED provides amazingly high lumen output from a
small energy efficient lighting fixture.
Housing
12# Die-cast aluminum. LM-6
Gasket
Silicon & rubber
Glass
Tempered Glass
Reflector
Anodized aluminum 1090
Surface Coat
AkzoNobel powder coating
Driver
Constant current BridgeLux COB LED
Input Voltage
100~277VAC
Operating Temp
-20°C~45°C
•
5–year warranty
Color Temps
3000K / 4000K / 5000K
•
Long life : 50,000 hours
Beam Angle
15° / 30° / 45°
3000K - 560 lm
7W
ACCESSORIES
5000K - 780 lm
Lumens
ø2.4“
5000K - 1120 lm
9.8“
ø2.8“
ø3.5“
1.6“
3000K - 810 lm
12W
: TP318
DIMENSIONS
TP603
TP602
ø3.3“
4.1“
7.5“
ø3.5“
5.5“
ORDERING GUIDE
ø3.75“
SERIES
WATTAGE
BEAM
BEAM
CRI
COLOR
TEMP
TP
07
SP45
FINISH
8
40
07—7W
SP15—45˚ very
narrow spot
DG
50—5000K
12—12W
SP30—30˚ spot
40—4000K
SP45—45˚ spot
30—3000K
mm
4.9“
example product code: TP07/SP45/840/DG
ASYW—30˚X65˚
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
55
landscape
oslo
TP20
28
TAMPA
20/28W LED
SPECIFICATIONS
TAMPA 20/28W :
The TAMPA 20/28 watt line voltage landscape stake fixture is a
high powered LED solution for almost any outdoor landscape
lighting project. Use it to light up building facades, trees,
retaining walls, and columns. Installation is quick and easy
and the COB LED provides amazingly high lumen output from a
small energy efficient lighting fixture.
Housing
12# Die-cast aluminum. LM-6
Gasket
Silicon & rubber
Glass
Tempered Glass
Reflector
Anodized aluminum 1090
Surface Coat
AkzoNobel powder coating
Driver
Constant current BridgeLux COB LED
Input Voltage
100~277VAC
Operating Temp
-20°C~45°C
•
5–year warranty
Color Temps
3000K / 4000K / 5000K
•
Long life : 50,000 hours
Beam Angle
15° / 30° / 45°
3000K - 1800 lm
20W
ACCESSORIES
5000K - 2100 lm
Lumens
3000K - 2745 lm
28W
9.8“
ø5.5“
ø4.5“
5000K - 3230 lm
ø2.4“
1.9“
DIMENSIONS
TP603
TP602
: TP319
ø5.2“
7.5“
ORDERING GUIDE
10.6“
ø5.47“
6.2“
ø5.5“
example product code: TP20/SP45/840/DG
WATTAGE
TP
20
SP45
20—20W
SP15—45˚ very
narrow spot
50—5000K
28—28W
SP30—30˚ spot
40—4000K
SP45—45˚ spot
30—3000K
mm
CRI
COLOR
TEMP
FINISH
8
40
DG
4.9“
SERIES
BEAM
BEAM
ASYW—30˚X65˚
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
56
landscape
oslo
TP36
48
TAMPA
36/48W LED
SPECIFICATIONS
TAMPA 36/48W :
The TAMPA 36/48 watt line voltage landscape stake fixture is a
high powered LED solution for almost any outdoor landscape
lighting project. Use it to light up building facades, trees,
retaining walls, and columns. Installation is quick and easy
and the COB LED provides amazingly high lumen output from a
small energy efficient lighting fixture.
Housing
12# Die-cast aluminum. LM-6
Gasket
Silicon & rubber
Glass
Tempered Glass
Reflector
Anodized aluminum 1090
Surface Coat
AkzoNobel powder coating
Driver
Constant current BridgeLux COB LED
Input Voltage
100~277VAC
Operating Temp
-20°C~45°C
•
5–year warranty
Color Temps
3000K / 4000K / 5000K
•
Long life : 50,000 hours
Beam Angle
15° / 30° / 45°
3000K - 3370 lm
36W
ACCESSORIES
5000K - 4070 lm
Lumens
3000K - 4240 lm
48W
9.8“
ø6.2“
ø5.3“
5000K - 5150 lm
ø2.4“
2.4“
: TP320
DIMENSIONS
TP603
TP602
7.1“
8.8“
12.5“
ø7.1“
ø6“
ORDERING GUIDE
ø8.1“
example product code: TP36/SP45/840/DG
WATTAGE
TP
36
SP45
36—36W
SP15—45˚ very
narrow spot
50—5000K
48—48W
SP30—30˚ spot
40—4000K
SP45—45˚ spot
30—3000K
mm
CRI
COLOR
TEMP
FINISH
8
40
DG
7.5“
SERIES
BEAM
BEAM
ASYW—30˚X65˚
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
57
58-65
f l e x i b l e
li g htin g
→Table of Contents
→Return to Main Page
→Contact illuminFx
59
SlimFlex
62
NeoGlow
63
RopeFx
64
Taurus
illuminFx reserves the right to make changes
to specifications at any time with or without notice
58
flex light
R I O | oslo
SLIMFLEX
SF
LED Tape Light
SPECIFICATIONS
Housing
Molded silicon sleeve
Voltage
Single Color—12V DC
RGB—24V DC
Length
5m per reel
LED Type
Single Color—Epistar SMD 3528
RGB— Epistar SMD 5050
LED Quantity
Single Color—300/m
RGB— 150/m
lighting for almost any application. To make it as easy to use in
Max Connection
10m (2 reels)
all situations, SlimFlex is CUTTABLE. The single color strip is
ACCESSORIES (per reel)
SLIMFLEX SF :
The SlimFlex SF series high brightness product is a simple
to use LED light strip. Anywhere that tape can go, so can the
illuminFx LED SlimFlex line. Use under banisters, around
stairs, under counters, as cove lighting, or as general accent
cuttable every 2” and the RGB strip is cuttable every 4”.
•
Long life epistar LED
•
2 year warranty
Clip on Connector
5
End Cap
3
Mounting Clip
15
Silicon Glue
1 tube
Connector Cap
2
Quick connector
1 (single color only)
DIMENSIONS
single color
RGB
Model Number
Total
Watts
Cord
Termination
LUM
Flux/m
Warm White
3000K
24W
2-wire
260
4.8W/m
Cool White
5000K
24W
2-wire
320
2 amps/m
4.8W/m
Blue
24W
2-wire
70
3 amps/m
7.2W/m
RGB
36W
4-wire
Variable
Current
Watts/m
Color
SFT50-30-1-830-67
2 amps/m
4.8W/m
SFT50-30-1-850-67
2 amps/m
SFT50-30-1-B-67
SFT50-30-2-RGB-67
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
59
flex light
oslo
SLIMFLEX
LED Tape Light
SF-HO
SPECIFICATIONS
SLIMFLEX SF-HO :
Dimensions
5m x 10mm x 2.5mm
Voltage
Single Color—24V DC
Power
96W (19.2 Watt/meter)
The SlimFlex High Output SF-HO series high brightness product
Cuttable
Yes - Every 25mm/6 LEDs
LED Quantity
1200 LEDs per reel
Current
4A (20mA per unit)
Humidity
40% ~ 70% R
versions allows for maximum light output in a very small area.
Ambient Temp
-20°C ~ 45°C
To make it as easy to use in all situations, SF-HO is CUTTABLE
CRI
Ra/CRI 80, 90 Available
every ~1”.
Beam Spread
120°
is a simple to use LED light strip. Anywhere that tape can go,
so can the illuminFx LED SlimFlex line. Use under banisters,
around stairs, under counters, as cove lighting, or as general
accent lighting for almost any application. This High Output
•
2 year warranty
PHOTOMETRICS
DIMENSIONS
96w / 120°
Beam Width
Intensity (foot candles)
Warm White
1m
2m
3m
8
3.15m
2
6.3m
.9
9.45m
Height
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
Color
Total
Watts
Cord
Termination
LUM
Flux/m
SF-HO-I0524CW
Cool
White
96W
2-wire
1440
SF-HO-I0524TW
True
White
96W
2-wire
1440
SF-HO-I0524WW
Warm
White
96W
2-wire
1440
SF-HO-I0524B
Blue
96W
2-wire
160
illuminFx reserves the right to make changes
to specifications at any time with or without notice
60
flex light
oslo
SLIMFLEX
LED Tape Light
SF-SO
SPECIFICATIONS
SLIMFLEX SF-SO :
Dimensions
5m x 10mm
Voltage
Single Color—12V DC
Power
48W (9.6 Watt/meter)
The SlimFlex SF-SO series is a side view LED strip light. Unlike
Cuttable
Yes - Every 3 LEDs
LED Quantity
600 LEDs per reel
LED Type
3825 SMD
Life
>30,000 hours
Operating Temp
-40°F ~ 140°F
Beam Spread
>120°
the standard SlimFlex line, the SF-SO series projects the light
out the thin side of the SlimFlex (figure 1)
Light Output Direction
This makes it perfect for wrapping round colums or around
other curved surfaces where you want the light to shine down
NOT out. Dimmable with most PWM dimmers (such as IFX’s
LDC series), or with IFX’s MD series transformers with a
standard LV dimmer.
Model Number
Total
Watts
Cord
Termination
SFS35-60-1-828-67
2800K
48W
2-wire
SFS35-60-1-830-67
3000K
48W
2-wire
Blue
48W
2-wire
SFS35-60-1-B-67
→Table of Contents
→Return to Main Page
→Contact illuminFx
Color
illuminFx reserves the right to make changes
to specifications at any time with or without notice
61
flex light
R I O | oslo
NEOGLOW
NG
LED Neon
SPECIFICATIONS
NEOGLOW NG :
Housing
Molded silicon sleeve
UV and flame resistant
Diffuser
Milky white
White PVC Base Edge to increase luminosity
The NeoGlow LED flexible lighting system is a perfect replacement for
Length / Cutting
50ft per reel / single color ~2” RGB ~3.2”
standard Glass Neon applications. It is highly flexible and easy to install.
LED Type
Single Color SMD 3528
RGB SMD 5050
a perfect choice for outdoor applications. Shape it around curves, and
LED Quantity
Single Color ~25 LED/ft
RGB ~24 LED/ft
corners, and create logos, letting, and patterns where traditional glass
Operating Voltage
24VDC
Max Run Length
1 roll (50 feet)
NeoGlow also is low voltage and IP65 (RGB IP67) rated which makes it
neon was once used. NeoGlow lets you save 70% over traditional lighting
methods at only 2W/foot (4.5W/foot RGB)! It is also lightweight and low
2 year warranty
A
B
•
Dimensions

100,000+ hours of operation

voltage which makes it safer and easier to both transport and install.
•
ACCESSORIES
.33”
.67”
RGB
.51”
1.02”
 A 
UC-NG08-100
Mounting Track (1m)
UC-NG16-100-RGB
Mounting Track (1m)
EC-NG08
End Cap
EC-NG16-RGB
End Cap
CK-NG08
Power connector
CK-NG16-RGB
Power connector
B
Single Color
IC-NG08
Pin connector
IC-NG16-RGB
Pin connector
Cutting
Interval
Watts/ft
Color
Total
Watts
Cord
Termination
NG08W-2D-W
2 inches
2W/ft
Warm White
100W
2-wire
NG08W-2D-C
2 inches
2W/ft
Cool White
100W
2-wire
NG08W-2D-B
2 inches
2W/ft
Blue
100W
2-wire
NG08W-2D-G
2 inches
2W/ft
Green
100W
2-wire
NG08W-2D-LY
2 inches
2W/ft
Yellow
100W
2-wire
NG08W-2D-R
5 inches
1.2W/ft
Red
60W
2-wire
NG08W-2D-A
5 inches
1.2W/ft
Amber
60W
2-wire
NG08W-2D-O
5 inches
1.2W/ft
Orange
60W
2-wire
NG16W-2D-RGB
3 inches
4.5W/ft
RGB
225W
4-wire
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
62
flex light
ROPEFX
LRL
LED Rope Light
SPECIFICATIONS
ROPEFX LRL :
Housing
Plastic extrusion
Length
50ft per reel
LED Type
SMD 3528
illuminFx LED RopeFx is versatile and easy to use. Great for
accentuating outdoor railings, trellises, walkways, trim, patios,
balconies, and patio umbrellas. Includes CK13 connector kit
to allow seamless operation on existing 12VAC transformers.
Easily cut the rope light to length on site for even easier
installations.
LED Quantity
~9 LED/ft
Cutting Interval
4.5”
Operating Voltage
12VAC
Max Run Length
1 roll (50 feet)
Dimensions
1/2” Diameter
•
50,000+ hours of operation
•
1 year warranty
ACCESSORIES
CK13
EC13
12v Connector Kit: Includes LED in
line driver, male connector, end cap,
and 4’ power cord.
RTR18/48
ML-2W-LP
End Cap
L connector for two
pieces of rope light.
IC13
T13-3
Rope to rope connector kit to go from
one section of rope light to another.
Available in either 18” or 48”.
Transparent connector
to connect two pieces
of rope light.
CP13
CC13
Simple mounting clip
Crocodile style
mounting clip
Cutting
Interval
Watts/ft
Color
Total
Watts
Cord
Termination
LRL-12v-50-WW
4.5 inches
.67W/ft
Warm White
33.5W
2-wire
LRL-12v-50-CW
4.5 inches
.67W/ft
Cool White
33.5W
2-wire
LRL-12v-50-B
4.5 inches
.67W/ft
Blue
33.5W
2-wire
LRL-12v-50-G
4.5 inches
.67W/ft
Green
33.5W
2-wire
LRL-12v-50-R
4.5 inches
.67W/ft
Red
33.5W
2-wire
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
Mounting track.
Packaged in 3ft lengths.
illuminFx reserves the right to make changes
to specifications at any time with or without notice
63
flex light
R I O | oslo
TAURUS
M1
LED Module
SPECIFICATIONS
TAURUS M1 :
The Taurus M1 line of Flex Light LED product from illuminFx is
a perfect solution for hard to light applications. Great for sign
illumination, these high brightness, low wattage LEDs are easy
to position and install. They produce uniform brightness in a
long lasting waterproof package. Perfect for backlit signs from
3-8 inch depths.
•
IP65 waterproof 5050 LED.
•
2 year warranty
Light Distribution
Housing
Injection molded PVC
Input Voltage
12V DC
Length
20 modules / 2 modules per foot / 10 ft
Modules 6” on center
3.5” of wire between modules
Lifespan
50,000 hours
Working Temp
-40°C—50°C
Max Connection
20 modules
IP Rating
IP 65
Mounting Method
3M adhesive tape
Provided No 2 316 Screw
M1–31D
M1-41D
Beam
Angle
Wattage/
Module
Max run
Wattage
Cord
Termination
LUM
Flux/module
Warm White
2800-3200
120
0.65
13W
2-wire
33
SMD5050
Cool White
5500-6500
120
0.65
13W
2-wire
52
M1-31D-B
SMD5050
Blue
120
0.65
13W
2-wire
7
M1-31D-G
SMD5050
Green
120
0.65
13W
2-wire
33
M1-31D-R
SMD5050
Red
120
0.65
13W
2-wire
15
M1-41D-X
SMD5050
RGB
120
0.8
16W
4-wire
Variable
Model Number
LED Tyoe
Color
M1-31D-WW
SMD5050
M1-31D-CW
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
64
flex light
oslo
TAURUS
M2
LED Module
SPECIFICATIONS
Housing
Injection molded PVC
Input Voltage
12V DC
Length
M2-11D
20 modules / 2 modules per foot / 10.67 ft
Modules 6.7” on center
5.2” of wire between modules
more light output is necessary. Ideal at 3-7 inches on single
Lifespan
50,000 hours
sided signs, and with their wider beam spread, they are perfect
Working Temp
-40°C—50°C
for double sided signs as well at 6-14 inch depth.
Max Connection
20 modules
IP Rating
IP 65
Mounting Method
3M adhesive tape
Provided No 2 316 Screw
TAURUS M2 :
The Taurus M2 line of LED modules are a high powered SMD
5050 LED. Ideal for bigger double sided signs and areas where
•
IP65 waterproof 5050 LED
•
2 year warranty
Double Sided Sign
Recommendation
Model Number
Light Distribution
Beam
Angle
Wattage/
Module
Max run
Wattage
Cord
Termination
LUM
Flux/module
Cool White
5500-6500
160
1.32
26.4W
2-wire
80
True White
8000-10000
160
1.32
26.4W
2-wire
80
LED Tyoe
Color
M2-11D-CW
SMD5050
M2-11D-CT
SMD5050
→Table of Contents
→Return to Main Page
→Contact illuminFx
M2-11D
illuminFx reserves the right to make changes
to specifications at any time with or without notice
65
66-68
li g htin g
a cc e s o r i e s
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
67
CV series
68
MD series
66
accessories
12/24V DC
POWER SUPPLIES
CV
30/60/100/200W
POWER SUPPLIES CV :
The CV series 12/24V LED drivers are long lasting outdoor rated
transformers. These high efficiency drivers provide 100,000 hours of
operation, and the small size allow for placement almost anywhere.
•
Constant voltage driver
•
Compact Size
•
Integrated components provide for low temperature operation
•
Single circuit class 2 output
•
UL Listed
•
Outdoor Rated IP67 enclosure
•
Working temperature : -30°—60°C
Model Number
Output
Voltage
Max
Load
Input
Voltage
Avg
Efficiency
Max
Current
Dimensions
Weight
Class 2
CV1203T
12 VDC
30W
100-240V AC /
47-63HZ
85%
2.5A
6.9 x 1.5 x 1.0 in
13 Oz.
Yes
CV2403T
24 VDC
30W
100-240V AC /
47-63HZ
85%
1.25A
6.9 x 1.5 x 1.0 in
13 Oz.
Yes
CV1206T
12 VDC
60W
100-240V AC /
47-63HZ
86%
5.00A
8.5 x 1.65 x 1.2 in
19 Oz.
Yes
CV2406T
24 VDC
60W
100-240V AC /
47-63HZ
86%
2.50A
8.5 x 1.65 x 1.2 in
19 Oz.
Yes
CV1210W
12 VDC
100W
100-240V AC /
47-63HZ
88%
8.33A
7.7 x 2.68 x 1.57 in
35 Oz.
Yes
CV2410W
24 VDC
100W
100-240V AC /
47-63HZ
88%
4.16A
7.7 x 2.68 x 1.57 in
35 Oz.
Yes
CV1220W
12 VDC
200W
100-240V AC /
47-63HZ
89%
16.67A
8.7 x 2.68 x 1.57 in
42 Oz.
Yes
CV2420W
24 VDC
200W
100-240V AC /
47-63HZ
90%
8.33A
8.7 x 2.68 x 1.57 in
42 Oz.
Yes
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
67
accessories
12V AC | DC
POWER SUPPLIES
MD
40/60/150/200/300W
POWER SUPPLIES MD :
The MD series 12V LED drivers are the most compact magnetic power
supply on the market. Standard with two auto or manual-reset breakers,
one on both the input and output, both the load and the driver are protected.
The coated metal enclosure includes 2 knock-outs for easy installation that
complies with electrical code requirements.
•
Fully dimmable with most quality magnetic low voltage drivers
•
Compact Size
•
Auto Reset breakers (Standard ONLY on models ending with -AR)
•
Dual protection
•
ETL or UL and CSA Listed
•
Nema 3R Enclosure
Output
Voltage
Max
Load
Input
Voltage/Current
Avg
Efficiency
Power
Factor
Dimensions
Weight
Class 2
ETL/
UL
MD020L12DC-AR
DC
40W
120V AC / 510mA
79%
0.88
5.6 x 2 x 2.14 in
35 Oz.
Yes
ETL
MD060L12DC-AR
DC
60W
120V AC / 760mA
80%
0.84
6.55 x 2.25 x 2.55 in
50 Oz.
Yes
ETL
MD150L12DC-AR
DC
150W
120V AC / 1.95A
80%
0.93
9.8 x 3 x 3 in
87 Oz.
No
ETL
MD200L12DC
DC
200W
120V AC / 2.13A
88%
0.92
9.8 x 3 x 3 in
87 Oz.
No
ETL
MD300L12DC-AR
DC
300W
120V AC / 2.86A
78.6%
0.93
9.8 x 4.2 x 3.5 in
140 Oz.
Yes
ETL
MD060L12AC-AR
AC
60W
120V AC /
540mA
89.2%
------
6.55 x 2.25 x 2.55 in
50 Oz.
Yes
ETL
MD150L12AC
AC
150W
120V AC / 1.27A
91.5%
------
9.8 x 3 x 3 in
87 Oz.
No
UL
MD300L12AC
AC
300W
120V AC /
92%
------
9.8 x 4.2 x 3.5 in
140 Oz.
No
UL
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
2.5A
illuminFx reserves the right to make changes
to specifications at any time with or without notice
68
69-74
L E D
l a m p s
→Table of Contents
→Return to Main Page
→Contact illuminFx
70
Centinel MR16
71
Centinel PAR38
72
Centinel A19
73
Centinel CC30
74
VC Filament
illuminFx reserves the right to make changes
to specifications at any time with or without notice
69
led lamps
LED/07MR|PAR16
MR
PAR
16
CENTINELv1
7W
SPECIFICATIONS
MR/PAR16 7W LED :
IFX’s CENTINEL high powered 7w MR16 & PAR16 series
guarantee outstanding efficiency and quality. These qualities
make our products ideal for general business and decorative
lighting purpose, including shop Lighting, Hotel lighting,
Commercial and Residential Applications. You can simply install
it within the showcase of the boutique, and for any display.
Also, the Centinel MR16 series can easily and smartly help
you lessen energy consumption up to 90%. It will enhance your
business and residential application and help the environment
flourish.
7w / 38º
.5m
1m
1.5m
2m
2.5m
840/640
.34m
210/160
.69m
93/71
1.03m
52/40
1.38m
Intensity (foot candles)
True white/Warm white
.5m
1m
1.5m
2m
1.72m
Diameter
33/25
Height
2.5m
7w / 120º
84/52
1.73m
21/13
3.46m
9/6
5.20m
5/3
6.93m
LED
/
Wattage
7W
Voltage
MR16 – 12V AC/DC
PAR16 – 100-200VAC
Color Temp
3100K / 4100K / 6500K
Base
GX5.3 / E26
Power Factor
.9
Height
07
MR16
MR16
PAR16
→Table of Contents
→Return to Main Page
→Contact illuminFx
/
BEAM
SPREAD
NFL50
/
CRI
COLOR
TEMP
8
41
SP38 - 38° Spot
NFL50 - 50° Narrow Flood
WFL120 - 120° Wide Flood
590 lm / 80 CRI
3100K (WW)
520 lm / 80 CRI
Operating Temp
-4°F~104°F
Life
30,000 Hours
Dimmable
No
Environment
Suitable for damp locations
Certifications
UL, FCC, RoHS, CE, ETL, REACH, C-Tick,
LVD, TÜV, KC Mark
Warranty
3 years
DIMENSIONS
GX5.3 Base
E26 Base
ø2”
ø2”
2.3”
0.9”
SHAPE
720 lm / 80 CRI
4100K (NW)
38° / 50° / 120°
1.8”
WATTAGE
6500K (TW)
Beam Angle
8.66m
Diameter
3/2
ORDERING GUIDE
LIGHT
SOURCE
MR/PAR16
Lumens/CRI
Illuminance
Intensity (foot candles)
True white/Warm white
Type
1.4”
1.1”
65 - 6500K (TW)
41 - 4100K (NW)
31 - 3100K (WW)
illuminFx reserves the right to make changes
to specifications at any time with or without notice
70
led lamps
LED/15PAR38
CENTINEL
PAR
38
30W
SPECIFICATIONS
Type
PAR38 (spot)
PAR38 30W LED :
Wattage
30W
Equivalent to
180W halogen
Voltage
90~277VAC / 24VDC
IFX’s CENTINEL 30W PAR38 series guarantees outstanding
Color Temp
3000K/4000K/6000K
efficiency and quality. This bulb is the most efficient and
Base
E26
brightest LED lamp for general lighting solutions on the market.
Power Factor
.9
It is perfect for brightening up wide areas, and is simple and
6000K (TW)
2750 lm / 70 CRI
easy to install. It lowers maintenance costs, but at the same
4000K (NW)
2480 lm / 80 CRI
3000K (WW)
1880 lm / 80 CRI
2200K (WW)
1700 lm / 80 CRI
Lumens/CRI
time provides fantastic light output.
Illuminance
Intensity (foot candles)
6000K
.5m
1m
1.5m
2m
1.19m
230
2.38m
102
3.58m
57.5
4.77m
36.8
5.96m
Diameter
Height
.5m
1m
1.5m
2m
2.5m
30w / 100º
300
2.41m
75
4.83m
33.3
7.24m
18.8
9.66m
12.0
12.07m
Diameter
Height
Operating Temp
-85°F~104°F
Life
50,000 Hours
Dimmable
Yes
Environment
Suitable for damp location
Do not use in enclosed fixtures
Certifications
UL, FCC, RoHS, C-Tick, Laser Testing,
CE, REACH, LVD
Warranty
3 years
DIMENSIONS
20°/38°/60°
4.72"

PAR38
NSP20
SP38
NFL60
FL100
→Table of Contents
→Return to Main Page
→Contact illuminFx
/
NFL60
- 20° Narrow Spot
- 38° Spot
- 60° Narrow Flood
- 100° Flood
/
CRI
COLOR
TEMP
8
40
7 - 70
8 - 80
60 - 6000K (TW)
40 - 4000K (NW)
30 - 3000K (WW)
22 - 2200K (WW)
D
/


30
BEAM
SPREAD
4.72"
5.6"
/
SHAPE


LED
WATTAGE

5"
ORDERING GUIDE
LIGHT
SOURCE
100°

920
Intensity (foot candles)
3000K
20°/38°/60°/100°

2.5m
30w / 60º
Beam Angle
VOLTAGE
A
A - AC
D - DC
illuminFx reserves the right to make changes
to specifications at any time with or without notice
71
led lamps
LED/06/10A19
CENTINELv3
A
19
6/10W
SPECIFICATIONS
A19 6/10W LED :
IFX’s CENTINEL v3 6/10W A19 series guarantees outstanding
efficiency and quality. Designed for style and sophistication,
these bulbs have a fin-less design that is simple and mimics
standard incandescent lamp design. Easily change out old
Type
A19
Wattage
6W—40W equivalent
10W—60W equvilalent
Voltage
100-120VAC
Color Temp
2700K/3000K
Base
E26
Power Factor
.85
incandescent or halogen bulbs and replace with this elegant,
energy saving solution. Works with many standard dimmers.
Illuminance
6W
470 lm / 80 CRI
10W
810 lm / 80 CRI
Beam Angle
350°
Operating Temp
-4°F~113°F
Life
25,000 Hours
Dimmable
Yes
Environment
Suitable for damp locations
Do not use in enclosed fixtures
Certifications
Energy Star, FCC, RoHS, UL, cUL
Warranty
3 years
DIMENSIONS
ø2.4”
ORDERING GUIDE
example product code: LED/06A19/OM350/830D
LIGHT
SOURCE
WATTAGE
LED
06
SHAPE
BEAM
SPREAD
CRI
COLOR
TEMP
A19
OM350
8
30
06—6W
30—3000K
10—10W
27—2700K
→Table of Contents
→Return to Main Page
→Contact illuminFx
4.4”
D
illuminFx reserves the right to make changes
to specifications at any time with or without notice
72
led lamps
LED/CC30
CENTINEL
CC30
27/54W
SPECIFICATIONS
CC30 27/54W LED :
Type
CC30 (Corn Cob)
Wattage
27/54W
Housing
PVC
IlluminFx’s 27 and 54W corn cob lights use advanced lens
LED Chip
27W = SMD 5630 / 54W = SMD 2835
LED Quantity
27W = 153 / 54W = 216
Voltage
100-277VAC
technology and materials to provide a high quality, high
performance LED lamp. This lamps 330° beam angle allows it
to cover every inch of space with light. It can help reduce energy
consumption by up to 70%, and last five times as long as an
equivalent halogen lamp. These qualities make these corn cob
lamps a popular choice in the market.
DIMENSIONS
27W / 54W
CCT
3000K
Color Temp &
Lumens
Lumens
Base
E26/27
Beam Angle
330°
Operating Temp
-4°~113°C
Life
50,000 Hours
CRI
Ra≥80
Dimmable
No
Certifications
CE, RoHS, LVD, EMC, UL
Warranty
5 years
4000K
5000K
27W
3900
4050
4100
54W
7730
8230
8375
4.1” / 6.46”
6.2” / 8.6”
7.8” / 10.2”
ORDERING GUIDE
LIGHT
SOURCE
LED
/
WATTAGE
SHAPE
54
CC30
27 - 27W
54 - 54W
→Table of Contents
→Return to Main Page
→Contact illuminFx
BEAM
SPREAD
/ VWFL330 /
CRI
COLOR
TEMP
8
42
/
HL
60 - 5000-7000K
42 - 4000-5000K
30 - 2700-3500K
illuminFx reserves the right to make changes
to specifications at any time with or without notice
73
led lamps
LED
VICTORIA
VC LED Filament :
IlluminFx’s line of LED filament bulbs offers a low cost, high
efficiency lamp to replace both incandescent and fluorescent
Filament Lamps
VC
applications. Get that incandescent appearance but with a low
wattage LED replacement. In addition, the Victoria series come
with a UL listing and full dimming capabilities. A perfect lamp
for any incandescent replacements around the house or office.
B11/Candle-E12 base
SPECIFICATIONS
Wattage
Part #
CRI
Ra>80
2W
LED/02B11/OM360/827/D
Material
Clear Glass
4W
LED/04B11/OM360/827/D
CCT
2700K
Working Temp
-13−104°F
Lifetime
25,000 hours
Dimmable
YES
G14-E26 base
2W - 220lm / 25W incandescent equivalent
Lumens/Equiv.
Wattage
Part #
2W
LED/02G14/OM360/827/D
4W
LED/04G14/OM360/827/D
4W - 440lm / 40W incandescent equivalent
6W - 600lm / 60W incandescent equivalent
8W - 800lm / 75W incandescent equivalent
A19-E26 base
→Table of Contents
→Return to Main Page
→Contact illuminFx
Wattage
Part #
4W
LED/04A19/OM360/827/D
6W
LED/06A19/OM360/827/D
8W
LED/08A19/OM360/827/D
illuminFx reserves the right to make changes
to specifications at any time with or without notice
74
75-90
c o m m e r c i a l
li g htin g
→Table of Contents
→Return to Main Page
→Contact illuminFx
76
Centauri
77
WP Wallpacks
83
PL Polemounts
85
Apollo
88
Jupiter
90
Newark
illuminFx reserves the right to make changes
to specifications at any time with or without notice
75
flood
Commercial
CENTAURI
CF
25/50/75/100/150W LED
SPECIFICATIONS
CENTAURI CF :
The CENTAURI flood light is a series of amazingly bright yet
Lens
Optics PMMA
Beam Angles
24˚ / 45˚ / 60˚ / 130˚ / 135˚ x 50˚
Color Temp
3000K (WW) / 6000K (CW)
Watts
Lumen
Output
cost effective and beautiful LED lighting fixtures. Not only do
you get the benefit of LEDs long life-span, but the CENTAURI
is also loaded with one of the brightest LEDs in the world - up
to an astonishing 10,500 lumens! Designed to be used in even
extreme climates, the CENTAURI is ideal for outdoor areas
such as large walls, gardens, and sports and marine locations.
25W
50W
75W
100W
150W
3000K
1350
2700
4050
5400
8100
6000K
1750
3500
5250
7000
10500
LED
CREE XP-G / CRI 80
Environment
Suitable for wet locations
-40˚F—121˚F
0-95%, non-condensing
Input Voltage
100~240VAC / 24VDC
Certifications
ETL, CE, FCC, LVD, RoHS, Laser Testing
Warranty
3 years
DIMENSIONS
CF025
CF050
Weight : 7.72 lbs
CF075/CF100
Weight : 11 lbs
Weight : 14.3 lbs
9.5”
9.5”
Weight : 17.6 lbs
9.5”
3.4”
3.4”
3.4”
CF150
9.8”
3.4”
8.9”
9”
10.1”
15”
20”
ORDERING GUIDE
example product code: CF075/DT135/DB
SERIES
CF
WATTAGE
VOLTAGE
COLOR
TEMP
BEAM
SPREAD
HOUSING
FINISH
075
D
T
135
DB
025—25W
D—24VDC
T—6000K (TW)
24—24˚
DB—Dark Brown
050—50W
A—120-240VAC
W—3000K (WW)
45—45˚
A—Aluminum
075—75W
60—60˚
100—100W
130—130˚
150—150W
135—135˚ x 50˚
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
9.5”
76
street light
Commercial
CENTAURI
CS
50/75/100/150W LED
SPECIFICATIONS
CENTAURI CS :
The CENTAURI street light is a series of amazingly bright yet
Lens
Optics PMMA
Beam Angles
45˚ / 60˚ / 90˚ / 135˚ x 50˚
Color Temp
3000K (WW) / 6000K (TW)
Lumen
Output
cost effective and beautiful LED lighting fixtures. Not only do
you get the benefit of LEDs long life-span, but the CENTAURI is
also loaded with one of the brightest LEDs in the world - up to
an astonishing 10,500 lumens! With a CRI of 80, the CENTAURI
provides excellent night time illumination which increases
vehicle and pedestrian safety. These Street Lights can be
easily directed to help increase savings by avoiding light loss in
unwanted directions. CENTAURI street lights will reduce your
operating and maintainance costs by 60%
Watts
50W
75W
100W
3000K
2700
4050
5400
8100
6000K
3500
5250
7000
10500
LED
CREE XP-G / CRI 80
Environment
Suitable for wet locations
-40˚F—121˚F
0-95%, non-condensing
Input Voltage
100~240VAC / 24VDC
Certifications
ETL, CE, FCC, LVD, RoHS, Laser Testing
Warranty
3 years
150W
DIMENSIONS
CS050
CS075/CF100
Weight : 11 lbs
Applicable Pole Dim : 1.65”—2.44”
13”
CS150
Weight : 14.3 lbs
Applicable Pole Dim : 1.65”—2.44”
Weight : 19.2 lbs
Applicable Pole Dim : 1.65”—2.44”
4.7”
3.2”
9.1”
ø2.44”
ø2.44”
8.8”
ø2.44”
8.9”
4.7”
12.6”
8.9”
4.7”
4.7”
19.9”
4.7”
ORDERING GUIDE
example product code: CS075/DT135/DB
SERIES
WATTAGE
VOLTAGE
COLOR
TEMP
BEAM
SPREAD
HOUSING
FINISH
CS
075
D
T
135
DB
050—50W
D—24VDC
T—6000K (TW)
45—45˚
DB—Dark Brown
075—75W
A—120-240VAC
W—3000K (WW)
60—60˚
A—Aluminum
100—100W
90—90˚
150—150W
135—135˚ x 50˚
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
77
wall pack
Commercial
WP01
WP
14W LED
optional photo control
SPECIFICATIONS
WP01 :
This luminaire combines both function and style with built-in
Housing
Die-cast aluminum
Coating
UV stabilized powder coated
Cover
High-impact polycarbonate diffuser
Output
heat sinks to provide a long lasting efficient LED light fixture.
11W
Lumens
Equivalent
828lm / 70 CRI
50W MH
The prismatic poly carbonate cover allows for brilliant light
LED
CREE XP-E
distribution. Efficient and versatile, this fixture is suitable for
Environment
Suitable for wet locations
Input Voltage
120~277VAC
Certifications
UL/CUL listed for wet locations
DLC listed
Warranty
2 years
both indoor and outdoor illumination.
PHOTOMETRICS
DIMENSIONS
ORDERING GUIDE
MODEL
NUMBER
WP01
–
WATTAGE
BEAM
SPREAD
60
WFL120
→Table of Contents
→Return to Main Page
→Contact illuminFx
–
INPUT
VOLTAGE
UA
–
CRI
COLOR
TEMP
HOUSING
COLOR
7
50
BZ
30 - 3000K*
40 - 4000K*
50 - 5000K
55 - 5500K*
BL - Black*
BZ - Bronze
WH - White*
* Available with extended lead time
* Minimum orders may apply
illuminFx reserves the right to make changes
to specifications at any time with or without notice
78
wall pack
Commercial
WP02
WP
14W LED
optional photo control
SPECIFICATIONS
WP02 :
This luminaire combines both function and style with built-in
Housing
Die-cast aluminum
Coating
UV stabilized powder coated
Cover
High-impact polycarbonate diffuser
Output
heat sinks to provide a long lasting efficient LED light fixture.
14W
Lumens
Equivalent
761lm / 70 CRI
50W MH
The prismatic polycarbonate cover allows for brilliant light
LED
CREE XP-E
distribution. Efficient and versatile, this fixture is suitable for
Environment
Suitable for wet locations
Input Voltage
120~277VAC
Certifications
UL/CUL listed for wet locations
DLC listed
Warranty
2 years
both indoor and outdoor illumination.
PHOTOMETRICS
DIMENSIONS
ORDERING GUIDE
MODEL
NUMBER
WP02
–
WATTAGE
BEAM
SPREAD
14
WFL120
→Table of Contents
→Return to Main Page
→Contact illuminFx
–
INPUT
VOLTAGE
UA
–
CRI
COLOR
TEMP
HOUSING
COLOR
7
50
BZ
30 - 3000K*
40 - 4000K*
50 - 5000K
55 - 5500K*
BL - Black*
BZ - Bronze
WH - White*
* Available with extended lead time
* Minimum orders may apply
illuminFx reserves the right to make changes
to specifications at any time with or without notice
79
wall pack
Commercial
WP03
WP
38W LED
W/diffuser
W/O Diffuser
(Type IES III Lens)
SPECIFICATIONS
WP03 :
Utilizing the latest generation of LED chips, this uniquely
Housing
Die-cast aluminum
Coating
UV stabilized powder coated
Glass
Heat and impact resistant tempered
Output
designed wallpack delivers a similar light output to a 150W
40W
Lumens
Equivalent
3026lm / 75 CRI
150W MH
metal halide but with only 1/3 of the energy consumption.
LED
CREE XP-E
The housing is made of powder coated die-cast aluminum
Environment
Suitable for wet locations
Input Voltage
120~277VAC
Certifications
UL/CUL listed for wet locations
DLC listed
Warranty
2 years
specifically designed for a harsh outdoor environment. The
WP03 is also full cut-off dark sky compliant.
•
DIMENSIONS
TYPEIII
WFL120
PHOTOMETRICS
ORDERING GUIDE
MODEL
NUMBER
WP03
–
WATTAGE
BEAM
SPREAD
INPUT
VOLTAGE
40
WFL120
UA
WFL120 - 120°
TYPEIII - IES Type III
–
CRI
COLOR
TEMP
HOUSING
COLOR
7
47
BZ
30 - 3000K*
40 - 4000K*
47 - 4700K
55 - 5500K*
BL - Black*
BZ - Bronze
WH - White*
* Available with extended lead time
* Minimum orders may apply
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
80
wall pack
Commercial
WP04
WP
38/78W LED
SPECIFICATIONS
WP04 :
Housing
Die-cast aluminum
Coating
UV stabilized powder coated
Glass
Heat and impact resistant tempered
Utilizing the latest generation of LED chips, this uniquely
designed wallpack delivers a similar light output to a 150/250W
Output
metal halide but with only 1/3 of the energy consumption.
Lumens
Equivalent
40W
2857lm / 70 CRI
150W MH
77W
5449lm / 70 CRI
250W MH
The housing is made of powder coated die-cast aluminum
LED
CREE XP-E
specifically designed for a harsh outdoor environment. The
Environment
Suitable for wet locations
Input Voltage
120~277VAC
Certifications
UL/CUL listed for wet locations
DLC listed
Warranty
2 years
WP-311 is also full cut-off dark sky compliant mounting sleeve.
•
DIMENSIONS
78W
38W
PHOTOMETRICS
ORDERING GUIDE
MODEL
NUMBER
WP04
–
WATTAGE
BEAM
SPREAD
38
WFL120
38W
78W
–
INPUT
VOLTAGE
UA
–
CRI
COLOR
TEMP
HOUSING
COLOR
7
47
BZ
30 - 3000K*
40 - 4000K*
47 - 4700K
55 - 5500K*
BL - Black*
BZ - Bronze
WH - White*
* Available with extended lead time
* Minimum orders may apply
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
81
wall pack
Commercial
WP05
WP
60W LED
optional photo control
SPECIFICATIONS
WP05 :
Utilizing a clean design formula for performance and reliability
Housing
Die-cast aluminum
Coating
UV stabilized powder coated
Glass
Heat and impact resistant tempered
Output
in harsh environments where elegant design is also required.
60W
Lumens
Equivalent
3416lm / 70 CRI
200W MH
The newest generation of LEDs coupled with a strategic lens
LED
CREE XP-E
array offers two distribution options for many applications.
Environment
Suitable for wet locations
Input Voltage
120~277VAC
easy maintenance. The optional photo sensor adds a simple
Certifications
UL/CUL listed for wet locations
DLC listed
way to save on energy costs
Warranty
2 years
Perfect for illuminating walkways, parking lots and other public
spaces. This unit is designed with a front hinged door frame for
DIMENSIONS
TYPEIII
WFL120
PHOTOMETRICS
ORDERING GUIDE
MODEL
NUMBER
WP05
–
surface mount
WATTAGE
BEAM
SPREAD
60
WFL120
–
INPUT
VOLTAGE
WFL120 - 120°
TYPEIII - IES Type III
→Table of Contents
→Return to Main Page
→Contact illuminFx
UA
–
CRI
COLOR
TEMP
HOUSING
COLOR
7
47
BZ
30 - 3000K*
40 - 4000K*
47 - 4700K
55 - 5500K*
BL - Black*
BZ - Bronze
WH - White*
pole mount
MOUNTING
–
S
P - Pole Mount
S - Surface Mount
* Available with extended lead time
* Minimum orders may apply
illuminFx reserves the right to make changes
to specifications at any time with or without notice
82
pole mount
Commercial
PL01
optional photo control
Knuckle mount
Slip-fitter mount
U-Bracket mount
Post mount
PL
50W LED
SPECIFICATIONS
PL01 :
This compact yet powerful flood light is a true innovation:
Housing
Die-cast aluminum
Coating
UV stabilized powder coated
Glass
Heat and impact resistant tempered
Output
Combining practicality and aesthetics with both a highly
50W
Lumens
Equivalent
3846lm / 70 CRI
175W MH
efficient LED engine and precise control. Together, this LED
LED
CREE XP-E
fixture provides astounding lighting performance. Multiple
Environment
Suitable for wet locations
Input Voltage
120~277VAC
Certifications
UL/CUL listed for wet locations
DLC listed
Warranty
2 years
mounting methods add to the versatility of this fixture.
Slip-Fitter Mount
DIMENSIONS
ORDERING GUIDE
MODEL
NUMBER
PL01
–
WATTAGE
BEAM
SPREAD
50
WFL120
–
INPUT
VOLTAGE
WFL120 - 120°
TYPEIII - IES Type III
→Table of Contents
→Return to Main Page
→Contact illuminFx
UA
–
Pole Mount
U-Bracket Mount
TYPEIII
WFL120
Knuckle Mount
PHOTOMETRICS
CRI
COLOR
TEMP
HOUSING
MOUNTING
COLOR
7
47
BZ
30 - 3000K*
40 - 4000K*
47 - 4700K
55 - 5500K*
BL - Black*
BZ - Bronze
WH - White*
–
SF
P - Pole Mount
SF - Slip-Fitter
U - U-Bracket
K - Knuckle
* Available with extended lead time
* Minimum orders may apply
illuminFx reserves the right to make changes
to specifications at any time with or without notice
83
pole mount
Commercial
PL02
U-Bracket mount
optional photo control
PL
100/190W LED
Pole mount
SPECIFICATIONS
PL02 :
Housing
Die-cast aluminum
Coating
UV stabilized powder coated
Glass
Heat and impact resistant tempered
This powerful luminaire has been designed to meet diversified
Lumens
installation requirements. It can be used in parking lots as a
Output
flood light or as a street light. With a built in heat sink, this
100W
~7236lm / 70 CRI
250W MH
190W
~14500lm / 70 CRI
400W MH
light fixture provides truly spectacular light output while
LED
CREE XP-E
staying cool for long life.
Environment
Suitable for wet locations
Input Voltage
120~277VAC
Certifications
UL/CUL listed for wet locations
DLC listed
Warranty
2 years
Pole Mount
U-Bracket Mount
DIMENSIONS
FL-5604/95/IESIII/47
FL-5604/95/EFL120/47
FL-5604/95/NSP16/47
FL-5604/95/WFL50/47
PHOTOMETRICS
Equivalent
ORDERING GUIDE
MODEL
NUMBER
PL01
–
WATTAGE
BEAM
SPREAD
100
WFL120
38W
78W
–
INPUT
VOLTAGE
NSP16 - 16°
FL50 - 50°
WFL120 - 120°
TYPEIII - IES Type III
→Table of Contents
→Return to Main Page
→Contact illuminFx
UA
–
CRI
COLOR
TEMP
HOUSING
MOUNTING
COLOR
7
47
BZ
30 - 3000K*
40 - 4000K*
47 - 4700K
55 - 5500K*
BL - Black*
BZ - Bronze
WH - White*
–
P
P - Pole Mount
U - U-Bracket
* Available with extended lead time
* Minimum orders may apply
illuminFx reserves the right to make changes
to specifications at any time with or without notice
84
down light
Commercial
APOLLO
DL
8” LED Retrofit
SPECIFICATIONS
Housing
Die-cast aluminum
Driver Efficiency
≥87%
Efficacy
≤91 Lumens Per Watt
CRI
Ra>80
This 8” retrofit downlight is perfect for replacing most incandescent,
LED Type
CREE COB with Truewhite Technology
CFL or H.I.D. fixtures. Conversion can even be done from below the
Beam Spread
40°
ceiling without removing the existing fixtures.
Driver Output
36V DC
APOLLO DL08 :
LED CHIP
Input Voltage
100~277V AC 50/60Hz
CREEs COB LED technology is used to create powerful efficient
Input Current
0.2A
lighting. Each chip has been LM80 tested from an accredited
Dimmable
Yes
Lifetime
≥50,000 hours
Certifications
UL/cUL listed, Energy Star, RoHS
FCC 47Part 15, LM79 Report,
Suitable for Damp locations
Warranty
2 years
testing laboratory in accordance with IESNA standards. Testing
provides for superior color consistency over time and temperature.
HEAT SINK
The LED light source mounts directly to the heat sink. This
extended aluminum heat sink provides even distribution to cool
the board. High thermal conductivity, radiation coefficient, and
convection coefficient allow the LEDs to run cooler which provides
DIMENSIONS

a significant boost to lifetime, efficacy, and color consistency.
OPTICAL SYSTEM
Fixture
Wattage
The reflector is made of surface oxidized metal, which enhances
interior of the reflector helps to prevent light glare, which makes
A
the lumen output of the fixture. The fish scale pattern on the

for a even light distribution.
ORDERING GUIDE

øB
Finish
LUM
Flux
Efficacy
DL08-18SP40-UA-8XXA
18W
Aluminum
1448
82 lpw
DL08-23SP40-UA-8XXA
23W
Aluminum
2060
91 lpw
XX Available
Color Temp
DL08-27SP40-UA-8XXA
27W
Aluminum
2380
87 lpw
30
3000K
3500K
DL08-33SP40-UA-8XXA
33W
Aluminum
2830
83 lpw
DL08-40SP40-UA-8XXA
40W
Aluminum
3190
78 lpw
40
4000K
50
5000K
illuminFx reserves the right to make changes
to specifications at any time with or without notice
9.3”
23W
7.2”
9.3”
27W
8”
9.3”
33W
8”
9.3”
40W
8”
9.3”
CCT
35
→Table of Contents
→Return to Main Page
→Contact illuminFx
B
7.2”

Wattage
Model Number
A
18W
85
down light
Commercial
APOLLO
DL
10” LED Retrofit
SPECIFICATIONS
Housing
Die-cast aluminum
Driver Efficiency
≥87%
Efficacy
≤70 Lumens Per Watt
Power Factor
>0.9
This 10” retrofit downlight is perfect for replacing most
LED Type
CREE COB with Truewhite Technology
incandescent, CFL or H.I.D. fixtures. Conversion can even be done
Beam Spread
40°
from below the ceiling without removing the existing fixtures.
THD
<20%
APOLLO DL10 :
LED CHIP
Input Voltage
100~277V AC 50/60Hz
CREEs COB LED technology is used to create powerful efficient
Input Current
0.2A
lighting. Each chip has been LM80 tested from an accredited
Dimmable
Yes with standard DC dimmers
Lifetime
≥50,000 hours
Certifications
UL/cUL listed, Energy Star, RoHS
FCC 47Part 15, LM79 Report,
Suitable for Damp locations
Warranty
2 years
testing laboratory in accordance with IESNA standards. Testing
provides for superior color consistency over time and temperature.
HEAT SINK
The LED light source mounts directly to the heat sink. This
extended aluminum heat sink provides even distribution to cool
the board. High thermal conductivity, radiation coefficient, and
convection coefficient allow the LEDs to run cooler which provides
DIMENSIONS

a significant boost to lifetime, efficacy, and color consistency.
OPTICAL SYSTEM
Fixture
Wattage
The reflector is made of surface oxidized metal, which enhances
interior of the reflector helps to prevent light glare, which makes
A
the lumen output of the fixture. The fish scale pattern on the
ORDERING GUIDE

Wattage
Finish
LUM
Flux
Efficacy
DL10-40SP40-UA-8XXA
40W
Aluminum
3000
70 lpw
DL10-54SP40-UA-8XXA
54W
Aluminum
4200
70 lpw
Model Number
→Table of Contents
→Return to Main Page
→Contact illuminFx
B
9.21”
11”
54W
9.21”
11”

for an even light distribution.
A
40W
illuminFx reserves the right to make changes
to specifications at any time with or without notice
øB

XX Available
Color Temp
CCT
30
3000K
40
4000K
50
5000K
86
track light
Commercial
OVATION
TL
15/25/35W LED
OVATION
TL01 :
The OVATION series of LED track fixtures uses a COB CREE LED
to provide a high CRI (90CRI available for 2700K and 3000K) and
80lm/W light output. The dimmable driver works with most standard
dimmers without flicker (120V AC ONLY). The fixtures are also
adjustable with a continuous rotation of 350° and a 90° pivot. Unlike
Metal Halide fixtures, the OVATIONs are instant start, quiet, and
environment friendly.
•
Ideal for accent lighting in shops, museums, galleries, schools,
hotels, and homes.
•
15W is equivalent to a 39W Metal Halide
•
25W is equivalent to a 50W Metal Halide
•
36W is equivalent to a 70W Metal Halide
36W

LUMENS
2802
3000K
1238
2009
2889
4000K
1358
2154
3052
5000K
1358
2154
3052
Fixture
Wattage
MODEL
NUMBER
WATTAGE
BEAM
SPREAD
TL1
25
SP38
15W
25W
36W
B

ORDERING GUIDE
NSP20 - 20°
NSP24 - 24°
SP38 - 38°
NFL60 - 60°
–
INPUT
VOLTAGE
2A
1 - 12V
2 - 24V
3 - 120V
U - Universal
–
CRI
COLOR
TEMP
HOUSING
COLOR
9
30
WH
8 - 80
9 - 90
27 - 2700K
30 - 3000K
40 - 4000K
50 - 5000K
BL - Black
WH - White
–
A
B
C

1904
15W
4.3”
5.15”
2.75”
C
1085

2700K
A
CCT
25W
25W
6.7”
5.9”
3.54”

15W
DIMENSIONS
36W
6.7”
5.9”
3.54”

TRACK
ADAPTER
J
H - Halo
J - Juno
L - Lightolier
A - AC
D - DC
→Table of Contents
→Return to Main Page
→Contact illuminFx
illuminFx reserves the right to make changes
to specifications at any time with or without notice
87
high bay
Commercial
JUPITER
HB
120/160/200/240W LED
SPECIFICATIONS
JUPITER
HB01 :
The APOLLO series of LED high bay fixtures provide
tremendous light output for commercial applications.
Environmentally friendly LEDs create an even light distribution
Housing
Aluminum
Surface Treatment
Anodic oxidation
Operating Temp
-20°C~45°C
CRI
75
Lumens
with a low cost of operation.
120W
160W
200W
240W
10800
14400
18000
20700
Power Factor
>90
warehouses and other large building
Light Efficacy
80-85 lm/W
•
50,000 hours of operation
LED Source
CREE/Epistar
•
Additional finish colors available on request
Input Voltage
AC 100-277V
Certifications
DLC, UL, CUL, CE, PSE, SAA, RoHS, FCC
Warranry
5 Years
•
Ideal for general lighting of commercial spaces such as
DIMENSIONS

20.8”

PRODUCT IMAGES / PHOTOMETRICS
ORDERING GUIDE
MODEL
NUMBER
HB01
–

WATTAGE
BEAM
SPREAD
160
FL90
120W
160W
200W
240W
NFL60 - 60°
FL90 - 90°
→Table of Contents
→Return to Main Page
→Contact illuminFx
–
INPUT
VOLTAGE
UA
–
CRI
COLOR
TEMP
HOUSING
COLOR
7
50
A
19.69ø

45 - 4500K
50 - 5000K
57 - 5700K
illuminFx reserves the right to make changes
to specifications at any time with or without notice
88
high bay
Commercial
JUPITER
HB2
100/150/200 LED
SPECIFICATIONS
JUPITER
HB02 :
The APOLLO series of LED high bay fixtures provide
tremendous light output for commercial applications.
Environmentally friendly LEDs create an even light distribution
Housing
Aluminum 6063
Reflector
PC Cover
Operating Temp
-30°C~60°C
CRI
>75
Lumens
with a low cost of operation.
100W
150W
200W
9000
15000
16640
Power Factor
>95
warehouses and other large building
Light Efficacy
95 lm/W
•
50,000 hours of operation
LED Source
CREE XML
•
Additional finish colors available on request
Input Voltage
AC 90-295V
Certifications
DLC, UL, CUL, RoHS, FCC
Warranty
5 Years
•
Ideal for general lighting of commercial spaces such as
DIMENSIONS

23.4”

PRODUCT IMAGES
ORDERING GUIDE
MODEL
NUMBER
HB02
–

WATTAGE
BEAM
SPREAD
INPUT
VOLTAGE
150
FL90
UA
100W
150W
200W
SP45 - 45°
FL90 - 90°
WFL120 - 120°
→Table of Contents
→Return to Main Page
→Contact illuminFx
–
CRI
COLOR
TEMP
HOUSING
COLOR
7
40
A
19.40ø

30 - 3000K
40 - 4000K
50 - 5000K
65 - 6500K
illuminFx reserves the right to make changes
to specifications at any time with or without notice
89
linear
Commercial
NEWARK
40/50W LED
NEWARK LF02 :
LF
PHOTOMETRICS
The NEWARK Linear LED fixture uses long lasting LEDs to
provide a smooth light output without glare. The simple sleek
design comes in two types: corrosion, water, and dust proof
with an IP rating of 65 for outdoor use, or an IP40 interior
option. These features allow it to be used for many applications
and in many environments. It is both robust and easy to install
with options for both light-line and hardwired connections for
up to 60 ft @120V of light with a single power connection.
Vertical Beam Angle (50%) : 119.3˚
SPECIFICATIONS
Horizontal Beam Angle (50%) : 105.3˚
Housing
Die-cast aluminum and PVC
Power Factor
≤0.95
CRI
Ra>80
CONNECTION TYPES
Soft Connection
3000K—3400 lm
40W
4000K—3500 lm
6500K—3600 lm
Lumens
Light-Line Connection
3000K—4700 lm
50W
4000K—4800 lm
6500K—4900 lm
Dimensions
4’ x 3.75” x 3.5”
Input Voltage
120~277V AC 50/60Hz
Dimmable
No
Lifetime
≥50,000 hours
Certifications
RoHS. CE, IP65
Warranty
3 years
ACCESSORIES
LF02-HA : Hangers
LF02-EC : End cap
LF02-ILC : InLine Connectors
ORDERING GUIDE
MODEL
NUMBER
LF02
–
WATTAGE
LENGTH
40
4I
40 - 40
50 - 50
4I - Interior
4E - Exterior
→Table of Contents
→Return to Main Page
→Contact illuminFx
–
INPUT
VOLTAGE
UA
–
CRI
COLOR
TEMP
LENS
ATTACH
CONNECT
8
65
C
S
30 - 3000K
40 - 4000K
65 - 6500K
S - Screws
C - Stainless
Clips
S - Single Fixture
L - Light Line
illuminFx reserves the right to make changes
to specifications at any time with or without notice
90
2016
LIGHTING
CATALOG
CONTACT
INFORMATION
Business Address
22 Harcourt Road
Rochester, New York 14606
Phone (585) 254 – 8010
Fax (585) 254 – 8033
www.illuminfx.com
info@illuminfx.com
COPYRIGHT
Entire contents © illuminFx Lighting Systems.
All rights reserved.
Reproduction in whole or in part without
permission is strictly prohibited.