Power Supply Unit Series for LED Lights
Type
Feature
Power Supply Units for Regular Lighting
Digital power supply
Repeatable, linear light intensity control
Intensity control with 256 discrete levels
using course and fine adjustments
1-channel
Full featured external control functionality
Multi-channel, independent
intensity control
Analog power supply
Intensity control with 256 discrete levels
using course and fine adjustments
2-channel, 4-channel, or 8-channel models
Full featured external control functionality
Continuous intensity control for simple,
cost sensitive applications with
Analog step-less intensity control
Strobe unit
HSL HLND
/
Stops motion with short overdriven pulse
Strobe with pulse width from 10 µms to 99 0 µms,
10% duty cycle max
2-channel type
PD2-1012
12V / 9.5W
100 ~ 120V AC 27VA
1
PD2-1024
24V / 9.0W
100 ~ 120V AC 27VA
1
PD2-3012
12V / 28W
100 ~ 240V AC 78VA
1
PD2-3024
24V / 28W
100 ~ 240V AC 78VA
1
PD2-5012
12V / 46W
100 ~ 240V AC 122VA
1
PD2-5024
24V / 46W
100 ~ 240V AC 122VA
1
PD2-3012-2
12V / 28W
100 ~ 240V AC 78VA
2
PD2-3024-2
24V / 28W
100 ~ 240V AC 78VA
2
PD2-3012-4
12V / 27W
100 ~ 240V AC 78VA
4
PD2-3024-4
24V / 27W
100 ~ 240V AC 78VA
4
PD2-3012-8
12V / 25W
100 ~ 240V AC 78VA
8
PD2-3024-8
24V / 25W
100 ~ 240V AC 78VA
8
PSB-512V
12V / 5W
100 ~ 120V AC 15VA
1
PSB-524V
24V / 5W
100 ~ 120V AC 15VA
1
PSB-1012VB
12V / 10W
100 ~ 120V AC 27VA
1
PSB-1024VB
24V / 10W
100 ~ 120V AC 27VA
1
PSB-3012VB
12V / 30W
100 ~ 120V AC 78VA
1
PSB-3024VB
24V / 30W
100 ~ 120V AC 78VA
1
PSB-1012V-WW
(3) Select from 2-channel, 4-channel, or 8-channel models to according to the number of independent outputs needed
(multiple lights can be connected to a single output channel with a 2 or 4 way split cables.
12V / 10W
100 ~ 240V AC 27VA
1
(4) Select one of the optional external control cables. (Refer to information on page 63)
PSB-1024V-WW
24V / 10W
100 ~ 240V AC 27VA
1
12V DC / 24W
22V DC / 24W
PD2 Series Specifications
24V DC
12V / 24V x 1
PB-2430
PTU2-3012
PTU2-3024
PSB2-10024-EX
DIN rail installation standard
2-channel, or 3-channel type
Analog step-less dimming setup
External control function incorporated
DIN rail models available (2CD/3CD)
CAUTION
61
Number of
channels
HLND Series dedicated power supply unit
HSL Series dedicated power supply unit
RoHS Directive Compatible
Power required
PS-3012-D24
Analog step-less dimming setup
External control function incorporated
Digital Power Supplies
Output
Model
Low cost 12V output, 24V input overdriving
strobe controller
HLV Series dedicated power supply unit
HLV
Dedicated power supply
Strobe power supply
Enabling to introduce a power supply
by keeping costs low
RoHS Directive Compatible
PSB2-30024-EX
PHL-0508-CD24
12V / 27W
24V / 27W
100 ~ 240V AC 78VA
100 ~ 240V AC 78VA
Page listed
2
P62/
P63
1
12V ~ 24V / 300W
100 ~ 120V AC /
200 ~ 240V AC 900VA
1
24V DC
1
PJ-1505-2CA
100 ~ 240V AC 27VA
2
PJ-1505-3CA
100 ~ 240V AC 37VA
3
PJ-1505-2CD24
24V DC
2
PJ-1505-3CD24
24V DC
3
Ensure total power consumption (W) of lights connected and simultaneously powered do not exceed the
chosen controllers power rating. Failure to do so will reduce maximum achievable light intensity.
PD2-3012 / PD2-3024 / PD2-5012 / PD2-5024 / PD2-3012-2 /
PD2-3024-2 / PD2-3012-4 / PD2-3024-4 / PD2-3012-8 / PD2-3024-8
The PD2 Series of digital power supplies are designed specifically for use with CCS LED lights. Compared with analog power
supplies, the PD2 Series provides a more linear and repeatable intensity control because of the force-detent adjustment course/fine
adjustment knobs and benefits of pulse duty control. The PD2 Series is suitable for all CCS lights without dedicated power supplies.
The Series is designed to meet the requirements of the widest variety of applications with the 12 and 24V options, power ratings
range, and the number of independent output channels. The PD2 Series is compatible with RoHS Directive*, ensuring compatibility
with worldwide requirements.
PD2-1012/PD2-1024
PD2-3012/PD2-3024
PD2-5012/PD2-5024
PD2-3012-2/PD2-3024-2
PD2-3012-4/PD2-3024-4
PD2-3012-8/PD2-3024-8
Selecting a PD2 Series power supply
P64
(1) Select a12-V or 24-V output models according to the voltage of a LED lights used.
(2) Select from the 10-watt or 30-watt models according to the total of power consumption of LED lights to be used.
P64
Model
Input voltage 1)
P65
P66
100 ~ 120V AC /
200 ~ 240V AC 240VA
PD2 Series
Offers repeatable, linear light intensity control with
256 discrete levels using course and fine adjustments
2
12V ~ 24V / 100W
Models with CE Marking:
P39
Input current 2)
PD2-1024
PD2-3024
PD2-5012
PD2-5024 PD2-3012-2 PD2-3024-2 PD2-3012-4 PD2-3024-4 PD2-3012-8 PD2-3024-8
100~240V AC
0.78A typ.
1.3A typ.
0.78A typ.
50/60Hz
15A typ.
Inrush current 2)
Number of channels
1
1
1
1
1
1
2
2
4
4
8
8
DC output voltage
12V
24V
12V
24V
12V
24V
12V
24V
12V
24V
12V
24V
28W max.
46W max.
46W max.
28W max.
28W max.
27W max.
27W max.
25W max.
25W max.
Output power
External control input
9.5W max. 9.0W max. 28W max.
Control method : 60kHz (approx.) pulse duty control
Manual
: 256-level of intensity control using dual 16 position Coarse and Fine rotary knob on the control panel
External control : Intensity control using 8-bit parallel signal
Input circuit
ON/OFF control
: At + 5.0V with 4.7k
D-Sub 15-pin (male)
D-Sub 25-pin (male)
Manual
: 3.5-mm microphone jack
External control : D-Sub 15-pin ON signal (Asynchronous with write sequence)
ON/OFF response
: D-Sub 25-pin OFF signal
Manual/
External control (Asynchronous with write sequence)
OFF - ON: 10µs typ., ON - OFF: 10µs typ.
Startup time
Output overcurrent protection
Input circuit : At + 5.0V with 1.5k Pull-up resistor.
Pull-up resistor.
HS-CMOS, Low level: 1.35V or less, High level: 3.15V or more
External control connector
P56
PD2-3012
100~120V AC
0.25A typ.
Frequency
Intensity control
P50
PD2-1012
0.5sec typ.
Activated by 107% minimum of the rated output current and reset by turning the power supply ON with front panel power switch.
Operating environment
Temperature 0 to 40 C, humidity 20 to 85%RH (with no condensation)
Storage environment
Temperature -20 to 60 C, humidity 20 to 85%RH (with no condensation)
Weight
0.7kg or less
1.1kg or less
1.3kg or less
1.1kg or less
1.2kg or less
1.5kg or less
1) Operating voltage: 85 to 132VAC or 85 to 264VAC, 2) At a voltage of 100VAC
62
Analog Power Supplies
PD2 Series Dimensions (Unit: mm)
PD2-3012 / 3024
(8)
(7)
230
PSB Series
9
AC cable (2.3 m)
External
Control
93
13.5
12
62
12
11.5
4-M3 depth 3
54x93(screw hole for securing)
PD2-3012-2 / 3024-2
(7)
8 9 10
11
12
13
14
15
2 1 16
L1
40
10.5
L1
(FAN)
Error
Power
20
130
20
140
15
11.5
PD2-3012-4 / 3024-4
170
100-240V
50/60HZ 122VA
External
Control
15
L1
4-M3 depth 5
(screw hole for securing)
4-M3 depth 5
40x200(screw hole for securing)
L2
40
10.5
20
190
20
15
200
15
Coarse
7
6
5
4
3
8 9 10
11
12
13
14
15
2 1 16
7
6
5
4
3
8 9 10
11
12
13
14
15
2 1 16
Fine
Power
110
100-240V~
50/60Hz 78VA
10
13.5
5.5
16
4-M3 depth 5
40x140
(screw hole for securing)
90
100-120V~
50/60Hz 27VA
CCS Standard Analog Power Supplies
62
15
PD2-5024
9.3
7
6
5
4
3
Light
on/off
200
Error
PD2-3012-8 / 3024-8
9
9
PD2-3012-4
7
6
5
4
3
8 9 10
11
12
13
14
15
2 1 16
L1
7
6
5
4
3
8 9 10 Coarse 8 9 10
11
7
11
12
6
12
13
5
13
14
4
14
15
3
15
2 1 16
2 1 16
L2
Fine
7
6
5
4
3
PSB-1012V-WW / PSB-1024V-WW
5.5
Coarse
8 9 10
11
12
13
14
15
2 1 16
15
10.7
PD2-3012
L1
7
6
5
4
3
110
L1
(FAN)
On/Off
External Control
Light
FG
54
External control connector
D-Sub 15-pin
Fine
Fine
PD2-1012
16
62
4-M3 depth 5
(screw hole for securing)
L2
8 9 10
11
12
13
14
15
2 1 16
15
5.5
7
6
5
4
3
Light
140
L1
90
8 9 10
11
12
13
14
15
2 1 16
Coarse
54
7
6
5
4
3
Error
Power
On/Off
15
10
External control connector
D-Sub 15-pin
86
External control connector
D-Sub 15-pin
Models with CE Marking
170
90
100-240V~
50/60Hz 78VA
10
External
Control
4-M3 depth 5
40x140
(screw hole for securing)
11.5
40
10.5
Power
20
130
20
15
140
15
8 9 10
11
6
12
5
13
4
14
3
15
2 1 16
L1
4-M3 depth 5
85x140
(screw hole for securing)
Error
20
15
L2
L3
External Control
L4
8 9 10
11
12
13
14
15
2 1 16
7
6
5
4
3
L1
7
6
5
4
3
100-240V~
50/60Hz 78VA
8 9 10
11
12
13
14
15
2 1 16
L5
8 9 10 Coarse 8 9 10
11
7
11
12
6
12
13
5
13
14
4
14
15
3
15
2 1 16
2 1 16
L2
7
6
5
4
3
Fine
8 9 10 Coarse 8 9 10
11
7
11
12
6
12
13
5
13
14
4
14
15
3
15
2 1 16
2 1 16
L6
Fine
7
6
5
4
3
L3
L7
8 9 10
11
12
13
14
15
2 1 16
Error
7
6
5
4
3
8 9 10
11
12
13
14
15
2 1 16
L8
20
15
12.5
85
12.5
12.5
L2
L3
L4
L5
L6
L7
4-M3
85x140
(screw hole for securing)
L8
100-240V~
50/60Hz 78VA
High
Low
85
12.5
15
140
15
20
130
20
Options for PD2 Series
External control cable for Intensity AND On/Off
For 1-channel or 2-channel type (D-Sub 15-pin)・・・・・EXCB2-B3 (3m)
For 4-channel or 8-channel type (D-Sub 25-pin)・・・・・EXCB2-25-3 (3m)
External control cable for ON/OFF ONLY
For 1-channel or 2-channel type (3.5-mm microphone jack)・・・・・NFCB2-3 (3m)
Digital Power Supply
PDS-30
Models with CE Marking
PDS-30
Compact and Multifunctional High-Performance
Specifications
Input voltage
Input current
Frequency
Light voltage
NO.of channels
Output power
PWM frequency
Light intensity steps
Strobe duration
Emission delay
RS-232C
External
control
Bit parallel
input
Trigger input
Operating environment
Storage environment
Weight
RoHS Directive Compatible
100 to 240V AC
1.0A max. (100V AC IN) 0.5A max. (200V AC)
50 / 60Hz 10%
12 V , 24 V
1
30W
50 1 kHz
Continuous: 256 steps, Strobe: 128 steps
16 steps: 20,40,60,80,100,140,180,260,400,500,1000µs,
3,5,8,10,33ms 10µs
16 steps: None (10µs max.)
30,60,80,100,150,200,250,300,500,750µs,1,2,4,8,10ms 10µs
Light intensity settings Strobe duration Strobe delay
Trigger output delay Inquire Reset Version confirmation
Baud rate, 9600 bps Data, 8 bits Stop bit, 1 bit Non-parity
Light intensity, 8-bit INT/EXT WR ON/OFF
Non-insulated, 5-V CMOS level input
Pulse width 20 µs min., rise/fall 10 µs max.
Non-insulated, 5-V CMOS level input
0 to 40°C, 20 to 85% humidity (with no condensation)
-20 to 60°C, 20 to 85% humidity (with no condensation)
1200g max.
The PSB Series is an analog power supply series providing stepless
intensity control through variable voltage control.
It is ideal for continuous use with cameras having a shutter speed of
1/4000 or faster. Worldwise type also available.
SMP-03VX1
PSB-3012VB
AC100 ~ 120V 78VA
12V/30W
1
SMP-02VX2
PSB-3024VB
AC100 ~ 120V 78VA
24V/30W
1
SMP-03VX2
PSB-1012V-WW
AC100 ~ 240V 27VA
12V/10W
1
SMP-02VX1
PSB-1024V-WW
AC100 ~ 240V 27VA
24V/10W
1
SMP-03VX1
113
PSB-1012VB / 1024VB
(17)
117
10.5
12V
24V
AC cable
(2.3m)
65
Compact and Efficient
PB-2430
Models with CE Marking
PB-2430
The single power supply handles the 12V and 24V type of CCS LED lights
at the same time, and allows the user to control the light intensity of each
one simultaneously or separately. It operates with 24VDC voltage input.
Part Names and Functions
Output connector for 12V LED lights
Strobe
Cont.
Remote Manual
RS-232C Parallel
Trig.+
Trig.ON/OFF+ ON/OFFDelay Intensity
ON
OFF
GND
L2-2
ON/OFF
RS-232C
L1/L2(FAN)
100-240V
50/60Hz
110VA
FG
ON OFF
TEST
40
62
22
12.5
40
PSB-3012VB / 3024VB
148
14
12.5
93
10 11
54
11
PSB-1012V-WW / 1024V-WW
(17)
(8.5)
131
(15)
AC cable
(2.3m)
76
86
GND
LIGHT
100-240V
14
120
14
GND
8
70
8
Specifications
15.5
100
15.5 11
5 6
4
7
3
8
9
2
10
1
INTENSITY
POWER
54
11
RoHS Directive Compatible
Input
24VDC 10%, 50W max (36W typ.)
DC output
L1: 12VDC 2A 24W max.,
L2: 22VDC 1.1A 24W max.
Total power consumption must not exceed 30W max.
Output voltage range/
Light intensity control
L1: Approx, 8.3 to 12.0VDC
L2: Approx. 15.0 to 22.0VDC
Intensity control by the 'ADJUST' potentiometers
Input terminal
Two terminals with 7.62 mm pitch, M3 screw
Output Connector
L1: SMP-02V-BC [JST] 1: Output + 2: Output L2: SMP-03V-BC [JST] 1. Output + 2: NC 3:Output -
Over-current protection
Built-in input Polyswitch
Insulation
Non-insulation between input and output
Cooling method
Natural air-cooling
Weight
Approx. 300g
Note: 1) When input voltage decreases, the output L2 will also decrease
(Input voltage must be 1.5V or higher than output voltage).
24VDC input terminals
Light w/fan output connector
RS232C control connector
BIT PARALLEL
11
9.5
POWER
80
L2-1
TRIGGER
5
ON
76
GND
24V light output connector
L1-2
L1-1
NC
90
(ms)
3 5 8
1000
10
500
33
20
PULSE WIDTH 400
260
40
180
60
( s) 140 100 80
B C D
A
E
9
F
8
0 COARSE
1
7
6
2
5 4 3
LIGHT CONTROL
B C D
A
E
9
F
8
0 FINE
1
7
6
2
5 4 3
MODE
110
By switching the voltage, 12-V and 24-V LEDs can be used.
(17)
12V light output connector
4-M3 depth 2 ( for side installation)
VOLTAGE
63
1
Dimensions (Unit: mm)
PDS-30
In addition to parallel control, a function allowing remote
control of the light intensity via RS-232C is provided.
24V/10W
* Models with lock of dimming control knob are available as option.
Models: PSB-512VL/PSB-524VL/PSB-1012VBL/PSB-1024VBL/
PSB-3012VBL/PSB-3024VBL
PDS-30
Choose from three types: ON, Strobe ON, and Remote Mode.
AC100 ~ 120V 27VA
11
Dimensions (Unit: mm)
Each 16 steps are provided for Coarse and Fine adjustment,
providing 256 steps light control.
SMP-02VX1
PSB-1024VB
PSB-1012VB/PSB-1024VB
External Control
Ext Mode
On
Off
140
L1
L4
Power
130
SMP-03VX1
1
PD2-3012-8
7
6
5
4
3
8 9 10
11
12
13
14
15
2 1 16
7
1
12V/10W
5 42
7
6
5
4
3
Fine
8 9 10
11
6
12
5
13
4
14
3
15
2 1 16
24V/5W
AC100 ~ 120V 27VA
GND
External control connector
D-Sub 25-pin
110
122
L2
Coarse
8 9 10
11
12
13
14
15
2 1 16
7
External control connector
D-Sub 25-pin
110
5.5
L1
7
6
5
4
3
(8)
80
L2
170
AC100 ~ 120V 15VA
PSB-1012VB
High
Low
5.5
4-M3 depth 5
(screw hole for securing)
L1
L1
(FAN)
9
PD2-3012-2
110
2
62
15
5.5
Light
1
10
On/Off
140
PSB-524V
Ext Mode
On
Off
15
SMP-02VX1
AC cable
(2.3m)
Power
External control connector
D-Sub 15-pin
1
PSB-3012VB/PSB-3024VB
L4
Error
Connector
12V/5W
PSB-512V / 524V
8 9 10
11
12
13
14
15
2 1 16
L3
Circuit
AC100 ~ 120V 15VA
Dimensions (Unit: mm)
PSB-512V/PSB-524V
(8)
Output
PSB-512V
5 45
120
9
170
Power requirements
5 50
9
PD2-5012 / 5024
(7)
RoHS Directive Compatible
Model
5 55
PD2-1012 / 1024
Specifications
15
140
170
Parallel control connector
Output connector for 24V LED lights
15
Intensity control for 12V LED lights
Intensity control for 24V LED lights
4-M3 depth 2
64
Strobe Power Supplies
PTU2-3012/PTU2-3024
Compatible with more than CCS LED lights
The PTU power supply Series enables CCS standard lights to be used
with strobes. It enables the lights to emit several times bright than
using the On/Off control function of the conventional PSB and PD
Series, or by strobe lighting using STU-3000. The units have two
independent circuits with separate controls for each circuit. The strobe
illumination time can be set from 10 µs to 990 µs using rotary controls.
Part Names and Functions
Trigger Setting
Selectable trigger mode.
Ext : External Trigger
I n t : Internal Trigger
Trigger Controller Connector
(D-sub 25)
Used to connect an external
controller.
Specifications
RoHS Directive Compatible
Output
2 circuits max, 27W
Illumination Mode
(Strobe) Internal Trigger/External Trigger
Trigger Input
Photocoupler Input (5 mA), with Insulated Power Supply
Power Supply
100 ~ 240V AC 78VA
Output Connector
SMP-02V X 2 (12V) / SMP-03V X 2 (24V)
Trigger Input Connector
D-sub 25pin, male
Strobe illumination Vidth
10µs to 990µs, set with 2-digit thumb-rotary switch
Trigger Cycle
Int: 1msec, Ext: 1msec or more at 10% duty or less
Option
External Trigger Cable: STCB-25-3 (3m)
Strobe Power Supply
Dimensions (Unit: mm)
PTU-3012 / 3024
STU-3000
Output
Strobe output, 18VDC, 8A max.
(The peak value of using 30W of load.)
DrivableIlluminators
12V/30W max.
Input terminal
7 terminals with 7.62mm pitch, M3 screw
Output Connector
SMP-02V-BC [JST] (Pin 1: + Pin 2: -)
Lighting Method
Strobe with overdriving (Built-in Protection Circuit)
Pulse Width
10.0µs-1.0ms (Pulse width control by potentiometer)
Trigger Interval
12.5ms min, (The trigger interval to the next signal should
be more than 12.5ms, otherwise the signal will be ignored.)
Trigger Input
Photo-coupler input, Input current 5mA or more, Over 20µs
pulse width, Rise/Fall time 10µs max.
Delay Time
Max. 10µs (Trigger input-Strobing)
Cost-effective, easy-to-use strobe power supply with overdriving power output
110
Overdriving capability provides all CCS 12V standard lights 2-3 times brighter
Pulse Width
100-240V AC
GND
Out put Connectors
Connect 12/24V lights.
80
12.5
4-M3 depth 5
85X145
(used for fixing screw hole)
125
145
12.5
Specifications
1 1
Int
50
POWER
L2
L1
Ext
L2
60
1 1
Control (%)
70
50
80 40
40
60
90
L1
70
80
30
90 30
90
20 10 100
20 10 100
12.5
85
5.5
EXT
12.5
High performance allows synchronization of light and camera
Rugged, compact housing
For use with 24VDC input
RoHS Directive Compatible
SMP-04V-BC (12V DC or 24V DC)
M3 terminal block 3P (Trig+ Trig- FG)
SMP-02V-BC (12V DC)
SMP-03V-BC (24V DC)
M3 jack (ON/OFF control signal)
Input
Achievement of strobe function in combination
with CCS's digital power supply
24VDC 10% 20W minimum (average)
(18)
170
Light Volume
Models with CE Marking
STU-3000
Input
PS-3012-D24
(8)
Strobe Unit
RoHS Directive Compatible
Dimensions (Unit: mm)
Ext : The two channels can be
set indenpendently from 10 to
990 µsec.
I n t : 100µs Fixed
Power Supply Switch
PS-3012-D24
Models with CE Marking
PS-3012-D24
Specifications
Models with CE Marking : PTU2-3012/PTU2-3024
Pulse Width Setting
The light intensity can be set
as a ratio of the set pulse width,
from 10% to 100%.
High Performance
and Low Price
Output
Trigger
Photo-coupler input 5V to 24V DC Current: 5mA max.
Pulse width: 20 s min. Rising / falling edge: 10 s max.
ON/OFF
control signal
Connection to lighting ON/OFF jack of the PD/PD2 power supply
Inside: Signal Outside: GND
ON pulse width
Set with the 4-digit thumbwheel switch (0.01 to 99.99ms).
Light delay
10 s max.
Accessories
ON/OFF control cable Power cable (12V) / Power cable (24V)
Weight
0.4kg max.
Connectable
power supply
PD-1012/1024/3012/3024/5024/3012-2/3024-2
PD2-1012/1024/3012/3024/5012/5024/3012-2/
3024-2/Other optional power supply
*For uses requiring large light volumes in short time periods, use the PTU2 Series.
Dimensions (Unit: mm)
STU-3000
Pulse width switch Trigger input terminal
110
65
70
By connecting the STU-3000 to CCS's PD and PD2 Series digital
power supplies, an ambient light can be used as a strobe light.
The one-shot circuit in the adaptor is activated by external trigger
signals, the power ON/OFF supply is controlled at a defined pulse
width, and an LED light is flashed as a strobe light.
The strobe flash time can be set between 0.01 and 99.99msec. by
means of the four-digit digital switch.
Output connector
for lighting 12V
Control output
connector
+
_
FG
msec
STU-3000
Output connector
for lighting 24V
31
TRIGGER
PULSE WIDTH
TEST
TEST button
Input connector
66
Optional
Optional Parts
Parts
A wide variety of optional parts are available.
Optional
Optional Cable
Cable
Select a cable to match the light used
RoHS Directive Compatible
Filter
Blocks ambient light out of blue wavelength range
Prevents glare from the light
Prevents glare from the light
Sharp Cut Filters
Blue-light Filter
Polarizing Filters
Polarizer
V44 Series
Model
Extension Cables
Blocks ambient light out of red wavelength range
R60 Series
R64 Series
RoHS Directive Compatible
PL Series
CB-1
12V
FCB
24V
CB-2
CB-3
Cable length: 1m
Used to connect a 12 V light to a power unit.
Mounted on front lens thread to transmit
approximately 47% of in a wavelength
band centered on 440nm in the wavelength
range from 350 to 520 nm.
Attaches to the filter screw hole on the
camera. Works with a polarizing plate
at right to eliminate glare from the light.
Attaches to many different lights.
Works in combination with the
polarizing filter at left to prevent glare.
R60-C
R60-16
R60-25
R60-27
R60-30
R60-40
R60-46
V44-C
V44-25
V44-27
V44-30
V44-40
V44-46
PL-25
PL-25-NL
PL-27
PL-27-NL
PL-30
PL-30-NL
PL-40
PL-40-NL
PL-46
PL-LDR-32
PL-LDR-42
PL-LDR-50
PL-LDR2-70*
PL-LDR-90
PL-LDR-120-40
PL-SQR-56
PL-LDL-34x8
For C-mount
M16.0 P0.5
M25.5 P0.5
M27.0 P0.5
M30.5 P0.5
M40.5 P0.5
M46.0 P0.75
R64-C
R64-16
R64-25
R64-27
R64-30
R64-40
R64-46
For C-mount
M16.0 P0.5
M25.5 P0.5
M27.0 P0.5
M30.5 P0.5
M40.5 P0.5
M46.0 P0.75
For C-mount
M25.5
M27.0
M30.5
M40.5
M46.0
P0.5
P0.5
P0.5
P0.5
P0.75
M25.5
M25.5
M27.0
M27.0
M30.5
M30.5
M40.5
M40.5
M46.0
P0.5
P0.5 (With lock)
P0.5
P0.5 (With lock)
P0.5
P0.5 (With lock)
P0.5
P0.5 (With lock)
P0.75
PL-LDL-42x15
PL-LDL-74x27
PL-LDL-82x15
*
PL-LDL-130x15
PL-LDL-180x16 *
PL-LDL-247x16 *
PL-LDQ-78
PL-LDQ-100
PL-LDQ-150
PL-LDQ-200 *
PL-LFV2-35
PL-LFV2-50
PL-LFV2-70
PL-LFV2-100
PL-LFV2-130
PL-LFV2-200
Cable length: 5m
FCB-1
Cable length: 1m
FCB-2
FCB-3
Used to connect a 24V light and an HLV series light to a power supply
Light Control Films
DF Series
CB-W-1
20cm
2-branch CB-W-2
12V
CB-W-3
CB-F
CB-W-5
* The polarizing plate indicated with '*' comes with a
transparent acrylic plate for attaching.
FCB-W-1
2-branch FCB-W-2
24V FCB-W-3
CB-F-1
4-branch CB-F-2
12V
CB-F-3
FCB-F
LC Series
CB-F-5
FCB-F-1
Ring type
Attaches to the LDR2, LDR2-LA and
SQR Series of lights to reduce shine
from glossy applications.
DF-LDR-32
DF-LDR-42
DF-LDR-50
DF-LDR-70
DF-LDR-90
DF-LDR-120-45
DF-SQR-56
DF-LDR-48LA
DF-LDR-74LA
DF-LDR-100LA
DF-LDR-132LA
DF-LDR-170LA
DF-LDR-208LA
Fixing adapter
To install a diffusion plate or polarizing plate
Light Adapter Rings
AD Series
Low-angle type
Plastic film arrayed with fine louvers
suppresses the diffusion of light in
specific directions and improves
parallelism.
Square type
Attaches to the LDQ and LDL Series of
bar-type lights to reduce shine from
glossy applications.
DF-LDL-34x8 (Applicable to LDQ-78)
DF-LDL-42x15 (Applicable to LDQ-100A)
DF-LDL-74x27
DF-LDL-82x15 (Applicable to LDQ-150A)
DF-LDL-130x15 (Applicable to LDQ-200A)
DF-LDL-180x16
DF-LDL-247x16
Mounted to back lights to suppress
light diffraction for visual inspections,
enabling sharp imaging of profiles.
LC-LDL-TP-27x27
LC-LFL-100
LC-LDL-TP-43x35
LC-LFL-180
LC-LDL-TP-51x51
LC-LFL-200
LC-LDL-TP-63x60
LC-LDL-TP-83x75
LC-LDL-TP-100x100
Holder
Holder
Attaches to filter section of lens
Secures any type of light
Lens Attachment Rings
Flexible Arms
MR Series
FA Series
By mounting this on a co-axial light, the parallelism
of light is improved and the particularities of a
workpiece can be effectively imaged.
For LFV2 Series
LC-LFV2-35
LC-LFV2-50
LC-LFV2-70
LC-LFV2-100
LC-LFV2-130
LC-LFV2-200
For LFV Series
LC-LFV-50
LC-LFV-70
LC-LFV-100
LC-LFV-130
LC-LFV-200
How to use polarizing
plates and polarizing filters
A polarizing filter and polarizing
plate are used in combination.
When the polarization direction of
the light side and the polarization
direction of the camera side differ
by 90° (a right angle), regular
reflection components of the light
are filtered out.
4-branch FCB-F-2
24V
FCB-F-3
Cable diameter on power unit side: Ø4.6mm
Cable diameter on light unit side: Ø3.0mm(CB)/ Ø3.5mm(FCB)
For use with LDR2-32, 42, 50, 90, and
120. This is used for mounting a diffuser
panel and a polarizing plate on a light
AD-LDR-32
AD-LDR-42
AD-LDR-50
AD-LDR-90
AD-LDR-120
67
Common use for LDR2-32 / LDR-32
Common use for LDR2-42 / LDR-42
Common use for LDR2-50 / LDR-50B
Common use for LDR2-90 / LDR-90B
Common use for LDR2-120 / LDR-120B
For use with LDR2-32, and 50. A light can be directly
attached onto the thread for a lens filter using this.
Suitable for use in installations in restricted spaces.
MR-LDR-32-M25
MR-LDR-32-M27
MR-LDR-32-M30
MR-LDR-50-M25
MR-LDR-50-M27
MR-LDR-50-M30
M25.5
M27.0
M30.5
M25.5
M27.0
M30.5
P0.5
P0.5
P0.5
P0.5
P0.5
P0.5
Holds a 10mm or 12mm rod for light
attachment. Can be secured at any
angle for easy light adjustment.
FA-12
FA-10
Ø12 mm rod
Ø10 mm rod
Cable length: 5m
FCB-F-5
Used to connect 12-V lights to a power unit.
One channel for the power unit and two channels for the lights.
Branch ends: 20 cmX2.
Used to connect 24-V lights to a power unit.
One channel for the power unit and two channels for the lights.
Branch ends: 20 cmX2.
Used to connect 12-V lights to a power unit.
One channel for the power unit and four channels for the lights.
Branch ends: 20 cmX4.
Used to connect 24-V lights to a power unit.
One channel for the power unit and four channels for the lights.
Branch ends: 20 cm×4.
Cable length: 1m
Cable length: 2m
Cable length: 3m
Cable length: 5m
Cable length: 1m
Cable length: 2m
Cable length: 3m
Cable length: 5m
Cable length: 1m
Cable length: 2m
Cable length: 3m
Cable length: 5m
Cable length: 1m
Cable length: 2m
Cable length: 3m
Cable length: 5m
* Total power consumption of the connected illuminations should not exceed the output of the power source. In addition,
if you wish to set light levels separately for each illumination, use a multi-channel power source.
Robot Cables
These cables stand up even to a 10 million-repetition bending test.
RCB-1
RCB
12V
FRCB
24V
Cable diameter: Ø4.6mm(RCB)/ Ø4.8mm(FRCB)
RCB-2
RCB-3
Cable length: 1m
Robot cable to connect a 12-V light to a power unit.
Cable length: 2m
Cable length: 3m
RCB-5
Cable length: 5m
FRCB-1
Cable length: 1m
FRCB-2
FRCB-3
Robot cable to connect a 24-V light to a power unit.
FRCB-5
Cable length: 2m
Cable length: 3m
Cable length: 5m
* When using a robot cable, secure the section of the cable that connects to the light, including the connecter.
Cable Dedicated to Fan-equipped Lights
These cables support the LFV Series of lights with fans. (Supported power units: PD-3012/3012-2/3024/3024-2/5024, PD2-3012/3012-2/3024/3024-2)
CB-FAN-2
10cm
CB-FAN
Attachment method :
(1) Place the polarizing plate on
the emitter of the light.
(2) Place the polarizing filter on
the end of the camera lens.
(3) Rotate the polarizing filter
until the polarization direction
is 90° (a right angle) from the
polarization direction of the
polarizing plate.
Cable length: 3m
Use a branch cable when you need to connect several lights to one power unit.
FCB-W-5
Diffuser
Cable length: 2m
Branch Cables
Diffusion Plates / Light Control Films
Converts diffused light into parallel light
Cable length: 3m
Cable diameter: Ø4.6 mm(CB) / Ø4.8 mm(FCB)
* PL-LDR2-70 comes with an adaptor for installation.
Prevents shine and glare
Cable length: 2m
CB-5
FCB-5
Mounted in front of a lens, R60 blocks light of
600nm or less, and R64 light of 640nm or less,
and both transmit approximately 85% of light in
wavelength bands longer than these.
Description
Cables that come with lights are about 30 cm. The following are available as cable extensions.
CB
PL Series
Application
12V
FCB-FAN
LIGHT
FAN
Cable diameter on power unit side: Ø5.2mm
Cable diameter on light unit side: Ø3.5mm
Notes
Cable length: 2m
FCB-FAN-2 Used to connect a 24-V fan and light to a power unit.
FCB-FAN-3 One channel for the power unit (4P connector) and two channels for the light.
Branch ends: 10cmX2.
FCB-FAN-5
Cable length: 2m
CB-FAN-5
LIGHT
FAN
Used to connect a 12-V fan and light to a power unit.
One channel for the power unit (4P connector) and two channels for the light.
Branch ends: 10cmX2.
CB-FAN-3
24V
Cable length: 3m
Cable length: 5m
Cable length: 3m
Cable length: 5m
* When you use a cable only for illuminations with fan, light modulation of the power source will be fixed to channel 1.
* To use the fan properly, the maximum current must be supplied from the power source.
* If you use a single channel power source other than the supported power sources using a normal branch cable with light modulation,
it may result in failure.
If cables are connected together to form a length of 5 m or more, lighting may become unstable.
When using a robot cable, secure the section of the cable that connects to the light, including the connector.
68