HVAC heating repair parts
Air Vents
67
75
700C
113222
401488
Float operated
1/8" connection
Up to 35 lbs. pressure
Vertical mounting
Float operated
Combo 1/2" I.P. female
and 3/4" male connection
Up to 150 lbs. pressure
Vertical mounting
1/8" connection
150 PSI
Max Temp.= 230˚F (110˚C)
#97
150 PSI
Max temp: 240˚F
#79
Vent, Auto
Vent, Air
Vent, Auto
Vent, Air
Vent, Water
boards
695100
695101
(I.D. #HH84AA020)
Time delay timings
Heat “ON” 75 sec., Heat “OFF” 105 sec.
Cool “OFF” 90 sec.
Operating Temp: -40° F to 176° F
Max Operating Humidity: 95% R.H.
Input Voltage:
Terminals; PR-1,PR-2, L1 & L2 - 120 VAC
Terminals; SEC-1 & SEC-2 - 18-30 VAC
(I.D. #HH84AA021)
Time delay timings
Heat “ON” 50 sec., Heat “OFF” 80-240 sec.
Cool “OFF” 90 sec.
Operating Temp: -40° F to 176° F
Max Operating Humidity: 95% R.H.
Input Voltage:
Terminals; PR-1,PR-2, L1 & L2 - 120 VAC
Terminals; SEC-1 & SEC-2 - 18-30 VAC
Board, Circuit
Board, Circuit
5-5⁄16" x 5-1⁄8"
5-1⁄16" x 5-5⁄16"
st9120U1011
Board, Electronic Fan Timer
Heat Speed
ON Delay: Field-adjustable
OFF Delay: Field-adjustable
Cool Speed
ON Delay: Field-adjustable
Off Delay: Field-adjustable
Ambient Temp °F: -40° to +175°
Includes wire harnesses and replaces many of the
ST9101, ST9120, ST9141 & ST9160 series timers.
capacitors
Run Capacitors, Oval
CPTO5370 5 uF, 370V
CPTO7.5370 7.5 uF, 370V
CPTO10370 10 uF, 370V
CPTO12.5370 12.5 uF, 370V
CPTO70370 70 uF, 370V
Perfect for general replacement
Other capacitor ratings available
184
Run Capacitors, Round
CPTR35370 35 uF, 370V
CPTR35440 35 uF, 440V
CPTR40440 40 uF, 440V
CPTR45440 45 uF, 440V
Run Capacitors, Dual/Round
CPTR40-5440 40+5 uF, 440V
CPTR45-5440 45+5 uF, 440V
Perfect for general replacement
Other capacitor ratings available
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
controls
5d5178
F560
Control,
Fan & Limit
11" element
Flush mounting
3/4" diameter element
Limit stop set @: 200°F
Limit adj. 100°F to 300°F
(FALTS57C-05T-120A)
Adj. fan off ˚F: 90˚-120˚, Fan on: N/A
Limit temp: 150˚-250˚, Limit diff.: 30˚
7"
Manual fan switch allows for continuous fan
Manual fan switch allows for continuous fan
Flush mounting
3/4" dia. element
Limit stop set @: 200°F
Limit adj. 100°F to 250°F
Control, Fan & Limit
Control, Fan & Limit
HVAC heating repair parts
l4064B2210 11-1/2" element
l4064b2228 5" element
l4064b2236 8" element
Turns the blower on & off as a
function of time & temperature
Gas Valves
VR8200A2132
SV9501M2528
Valve, Dual
Combination Gas
Valve, Gas
24V, 1/2" x 1/2"
Standard Opening
Pressure Rating: 1/2 PSI
Ambient Temp °F:
-40°F to +175°F
*Ambient Temp °F:
0°F to +175°F
Set at 3.5" WC
24 volt
1/2" x 1/2"
Standing pilot
Includes reducer bushings
Natural to L.P. gas conversion kit
Controls include: manual valve, 2 automatic
operators, servo pressure regulator and pilot adj.
700402
Valve, Combination Gas
24 Volt
Model: 7000BE & 7000BER
240,000 BTUH capacity
3 pos. outlet (FPT):
inlet size: 1/2"
straight thru: 3/4"
side w/ plugs: 1/2"
Includes: Extension harness for SmartValve
power connector, natural to LP conversion kit
710502
Valve,
Combo Millivolt Gas
Model: 7000MVRLC
70,000 BTUH capacity
3 pos. outlet (FPT):
inlet size: 1/2"
straight thru: 1/2"
side w/ plugs: 1/2"
720079
Valve, Gas
Model: 7200IPER
320,000 BTUH capacity
3 pos. outlet (FPT):
inlet size: 1/2"
straight thru: 3/4"
side w/ plugs: 1/2"
Universal
Includes reducer bushings, LP adapter plate
and built-in regulator set at 3.5" W.C.
Includes reducer bushings
Has gas regulator set at 3.5" W.C.
Designed for recreational vehicles and other
low capacity heating applications
For intermittent pilot, direct spark and hot
surface. Has a compact swing radius of 3-9⁄16"
Includes reducer bushings, LP conv. hardware
Regulator set at 3.5" natural gas, 11" L.P.
720400
36c03300
36H32304
24V
230,000 BTUH capacity
2 pos. outlet (FPT):
inlet size: 1/2"
straight thru: 3/4"
24 Volt
140,000 BTUH capacity
Fast Opening
3 pos. outlet (FPT):
inlet size: 1/2"
straight thru: 3/4"
side w/ plugs: 1/2"
Valve,
Dual Combo Gas
Model: 7200ER
150,000 BTUH capacity
3 pos. outlet (FPT):
inlet size: 1/2"
straight thru: 3/4"
side w/ plugs: straight thru
Includes reducer bushings, LP adapter plate
and built-in regulator set at 3.5" W.C.
Valve, Combination Gas
Regulator setting:
Nat. 3.5" W.C.
Regulator adj. range nat. gas 2.5"-5.0" W.C.
Includes bushing and jumper wire
Ideal for general purpose replacement
Valve, Redundant Gas
Has a swing radius of 3-9⁄16"
Regulator adj. range nat. gas
2.5"-5.0 “ W.C. Set at 3.5" W.C.
Ambient temp: -40°F to + 175°F
Max pressure: 1/2 PSI (14.0" W.C.)
Includes reducer bushings, LP conv. hardware
Has pilot filter, adj. pilot pressure and manual
shut-off valve
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
185
HVAC heating repair parts
igniters
41401
Igniter, Hot Surface
Q3400A1024
Igniter, Flame Rod Assembly
(ID#: 271A)
Ceramic block: 1-5/8" wide
Terminal connector: 1/2" wide
Lead wire length: 4-1/2"
Disconnect on
wire ends
ceramic
Includes spring clip
41402
Igniter, Hot Surface
41403
Igniter, Hot Surface
(ID#: 271W)
Ceramic block: 1-1/4" wide
Stripped wire ends
Lead wire length: 19"
(ID#: 271)
Ceramic block: 2" wide
Stripped wire ends
Lead wire length: 5-1/8"
ceramic
ceramic
41404
Igniter, Hot Surface
41405
Igniter, Hot Surface
(ID#: 271)
Ceramic block: 2" wide
Terminal connector: 5/8" wide
Lead wire length: 4-1/2"
ceramic
(ID#: 271D)
Ceramic block: 1-1/4" wide
Stripped wire ends
Lead wire length: 5-1/8"
terminal
ceramic
41406
Igniter, Hot Surface
41407
Igniter, Hot Surface
(ID#: 271Y)
Ceramic block: 2-11/16" wide
Stripped wire ends
Lead wire length: 10-1/2"
41408
Igniter, Hot Surface
(ID#: 271N)
Ceramic block: 1-1/4" wide
Terminal connector: 7/16" wide
Lead wire length: 4-1/2"
186
(ID#: 271M)
Ceramic block: 2" wide
Terminal connector: 1/2" wide
Lead wire length: 4-1/2"
Includes gasket
ceramic
ceramic
terminal
terminal
ceramic
terminal
41409
Igniter, Hot Surface
(ID#: 271)
Ceramic block: 2" wide
Terminal connector: 5/8" wide
Lead wire length: 4-1/2"
ceramic
terminal
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
Includes gasket
igniters
41411
Igniter, Hot Surface
(ID#: 271N)
Ceramic block: 1-1/4" wide
Terminal connector: 1/2" wide
Lead wire length: 4-1/2"
ceramic
(ID#: 271N)
Ceramic block: 1-1/4" wide
Terminal connector: 7/16" wide
Lead wire length: 4-1/2"
terminal
ceramic
41412
Igniter, Hot Surface
terminal
411090
Igniter, Hot Surface
(ID#: 271)
Ceramic block: 1-1/4" wide
Terminal connector: 5/8" wide
Lead wire length: 4-1/2"
ceramic
HVAC heating repair parts
41410
Igniter, Hot Surface
Ceramic block: 1" wide
Stripped wire ends
Lead wire length: 13-3/4"
terminal
ceramic
PLT3400
Igniter, Hot Surface
1096048
Igniter, Retro-Fit Boiler
Ceramic block: 2-11/16" wide
Terminal connector: .250" male insulated
Lead wire length: 12"
Terminal connector: 5/8" wide
Lead wire length: 5-1/4"
terminal
Lochinvar igniter
Includes mounting brackets
902661
Igniter, Round Boiler
Turn to the next page for an
igniter cross reference and
trouble shooting guide.
Lead wire length: 9"
Nordyne igniter
Includes two quick disconnects
PDQ also carries HVAC BELTS
call today 800.843.0903
FHP V-Belt
Deep Wedge
Multi-Cogged
Multi-Plus V-Belt
Raw Edged Cogged
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
187
HVAC heating repair parts
igniters
CROSS REFERENCE
Amana
* The OEM’s used a wide variety of terminal
connector types, therefore, all Robertshaw/
Norton 41 Series functional replacement
ignitors include ceramic wire connectors.
+ May have exact O.E.M. terminal connector.
OEM
Am. Appliance
OEM Part # Part #
Funct.
x
OEM
Norton (cont)
OEM Part # Part #
271P
41-405
271M
41-406
Exact
Funct.
+
x*
+
x*
41-401
D99182
41-401
x
10041601
41-401
x
271N
41-402
x*
271B
41-406
x
271W
41-402
x*
271Y
41-406
+
x*
Am. Road Equip.
201W
41-402
x
Armstrong Air
38322B001
41-402
x
Perfection Schwank 108803-G1
41-406
x
Carrier Corp.
Claire Brothers
LH33ZS004
41-409
600915
41-403
x
C-238
41-402
x
Raypak
Rheem
62-22441-01
41-408
x
C-242
41-402
x
62-22441-01
41-402
1474-051
41-402
x
62-22868-82
41-411
904034300
41-409
90436600
41-402
50018
41-405
x
1380672
41-409
x
1380680
41-409
x
1380654
41-403
x
94851
41-402
x
B138196P02
41-403
B144676P01
41-410
x
B144676P02
41-407
x
B340039P01
41-408
x
Coleman
x
1474-052
41-402
x
Comfort Zone
015114-04-01
41-406
x
Detroit Radiant
201D
41-405
x
Roberts Gordon
Smith HB
Snyder General
DMO Industries
20834
41-405
x
Dornback Furnace
271W
41-402
x
Ducane
20015201
41-409
Enerco
Evcon
10399
41-402
x
1474-051
41-402
x
1474-052
41-402
x
B1401009
41-412
09050
41-402
1009604
41-412
x
340039P01
41-402
PLT2400
41-406
x
IGN23
41-402
75-92-104
41-402
x
IGN26
41-409
75-92-105
41-402
x
IGN26
41-403
201N
41-402
x
IGN30
41-407
x
IGN30
41-403
IGN34
41-408
Goodman
Hupp Industries
Intercity
Lochinvar Corp.
Majestic
Metzger
Mor-Flo
Nordyne
Norton
TROUBLESHOOTING CHART
201W
41-402
3200580
41-406
x
x
x
x
Trinco-Heatmaker
41-401
x
41-405
x
105141000
41-402
x
Viessman
9302-094
Wayne Home Equip. 62821-001
632-0880
41-402
x
62821-002
41-402
632-0770
41-402
x
511-330-139
41-409
x
x
Weil-McLain
2600-359
x
x
x
41-402
201
41-403
x*
511-330-188
41-406
201A
41-401
x*
511-330-193
41-403
201D
41-405
+
x*
511-330-190
41-404
201J
41-406
+
201K
41-402
x*
x*
201L
41-402
201M
41-406
x
201N
41-406
x
201R
41-402
x*
201W
41-402
x*
White L.B. Compay 120-07549
White Rodgers
767A-309
x*
x*
Williamson
York International
x
x
x
x
41-402
41-401
x
x
767A-356
41-401
x
767A-361
41-405
x
767A-357
41-402
x
09050
41-402
x
025-27766-000 41-405
x
x
201Y
41-406
x*
025-27774-000 41-405
271
41-403
x*
025-29043-000 41-405
x
271A
41-401
x*
025-29050-000 041-405
x
NO
+
Failure to read and follow all instructions carefully, before installation or
operating this control, could cause personal injury and/or property damage.
Confirm 24VAC between “TR” & “TH”
terminals on ignition module.
Confirm Transformer output; if NO, replace.
Confirm wiring integrity.
Confirm proper voltage between L1 & L2.
Confirm proper voltage to ignitor.
If YES, replace ignitor. If NO, replace control.
NO
Confirm proper L1 & L2 phasing (polarity).
Confirm proper voltage (24VAC) at gas valve.
If NO, replace ignition control.
Confirm proper ignitor position.
If OK, replace gas valve.
NO
Confirm proper L1 & L2 phasing (polarity).
Confirm proper ignition control grounding.
Confirm proper ignitor position.
If OK, replace ignition control.
yes
yes
end troubleshooting
x
x
x
yes
yes
x
x
41-402
during heat-up time ignitor glows red
call for heat ends, burner shuts off
x
x
41-406
yes
main burner remains lit
Superior Fireplace
Trane Company
x
3200618
Set thermostat to call for heat
after ignitor heat-up time
main burner lights
x
x
x
3210401
WARNING
start
188
Exact
B1336102
NO
Confirm zero (0) VAC at “valve” terminal on ignition control.
Confirm integrity of thermostat.
Check voltage at main valve.
If zero (0) VAC, replace gas valve.
If 24VAC, replace ignition control.
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
igniters
HVAC heating repair parts
TROUBLESHOOTING CHART
HOT SURFACE OPERATION
On a typical heating system with hot surface ignition, a call for heat (thermostat contacts closed) will send a 24 volt signal to the Robertshaw ignitor
module. When energized, the module will power-up the ignitor within one
second. If the module is a pre-purge model, it will delay 17 or 34 seconds
before the ignitor is activated. On pre-purge models, the module will energize the combustion blower or other relays at the beginning of the cycle.
Once the pre-purge timing is up (if so equipped), the silicon carbide ignitor
heats up to proper ignition temperature in either 17 or 34 seconds, depending on the module part number. NOTE: A 17 second ignitor can be used
on a 34 second application but not the other way around. See 41-400
series for Robertshaw’s replacement ignitors.
At the end of the ignitor warm-up period, the gas valve main valve opens.
The ignitor will remain on for a specific amount of time (seconds) depending
on the specific ignition module being used. This “ON” time or “valve trial
time” could be 4, 6, 8, or 12 seconds. When main burner ignition occurs,
the flame is sensed by the ignitor (local sense) or by a remote sensor
(remote sense). With main burner flame established, the ignitor is turned
off. NOTE: The burner flame must be detected within the valve trial time.
If no flame is detected, the gas valve main valve is de-energized, shutting
off the gas flow.
PROBLEM #1 - HOT SURFACE IGNITOR DOES NOT GLOW RED
(Remember to wait for purge time, 17/34 seconds, on models so equipped)
Possible causes
A. No main power
B. Faulty transformer
C. Faulty thermostat
D. Faulty limit switch
E. Faulty blower interlock switch
F. Faulty ignition control
Solution
Step #1
Perform normal system checks of main power, transformer, thermostat,
limit switch, blower interlock switch, and replace faulty component.
Step #2
With power on and thermostat set at its highest position, check voltage
between “TH” and “TR” on HS780 ignitor control. If 24 volts is not present check output at transformer. If no, replace transformer. If transformer
checks out OK look at other controls in the 24 volt circuit I.E.: thermostat,
limit switch, blower interlock switch. Check for 120 volts between “NEUT”
(L2) and “120” (L1). Check for 120 volts at the ignitor across “IGN” and
“IGN” terminals on the HS780 ignitor module. If 120 volts is present,
replace ignitor. If no, replace the 780 series module.
CAUTION POLARITY MUST BE OBSERVED
Step #5
Check for 24 volts at the gas valve terminals; “1” and “2” on a 7200
series, “M” and “C” on a 7100 series, “TH” and “TR” on a 7000 series.
If yes, check wire integrity or change the gas valve. If no, change the
780 series ignition module.
PROBLEM #3 - MAIN BURNER SHUTS OFF BEFORE THE
THERMOSTAT IS SATISFIED
Possible causes
A. Improper ignitor alignment
B. Faulty ignition control
C. Contaminated ignitor and/or sensor(remote sense)
D. Bad burner ground
Solution
Step #1
Check proper polarity of “NEUT” and “120” on the ignition control by
reversing the wires. If this does not solve the problem, replace the
wires as they were.
Step #2
Check for proper ignitor position.
Step #3
PROBLEM #2 - IGNITOR GLOWS RED BUT MAIN BURNER WOULDN’T LIGHT Check for proper ignition control grounding.
Step #4
Possible causes
Visually inspect the ignitor and/or the remote sensor for any contamiA. Improper ignitor alignment
nation or other foreign matter that might keep either unit from sensing
B. Faulty ignition control
main burner flame. Clean or replace.
C. Faulty gas valve
Step #5
D. High inlet gas pressure
Check main burner ground by checking for continuity between “TR”
E. Polarity reversed
and burner. If a poor reading is obtained, take corrective action.
F. No earth ground
Step #6
Solution
If steps 1 thru 5 are OK, replace ignition control.
Step #1
PROBLEM #4 - MAIN BURNER DOES NOT SHUT OFF WHEN THE
Check for availability of gas valve. Make sure the manual valve upstream
THERMOSTAT IS SATISFIED
of the gas valve and the gas valve are in the full on position. Also make
Possible causes
sure gas is being supplied to the system at the proper pressure, too high
A. Faulty gas valve
will lock-up the valve.
B. Faulty ignition control
Step #2
Check proper polarity of “NEUT” and “120” on the ignition control by revers- Solution
ing the wires, if reversed gas valve will not open. If this does not solve the Step #1
Check thermostat to make sure the contacts are open, check for 24
problem, replace wires as they were.
volts between “TH” and “TR”. Should be zero, if gas valve is stuck
Step #3
open, replace the valve.
Check proper ignitor position.
Step #2
Step #4
Check for voltage between “valve” and “ground” on the ignition control.
Check for a good earth ground by using a meter connected between L1
If 24 volts are present replace ignition control. If there is no voltage,
and furnace chassis. Should read 120 volts, if no, check and/or repair
replace gas valve.
ignition ground ie: ground wire or ignition control mounting screws.
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
189
HVAC heating repair parts
Modules - motors
780715
780783
(Model: SP715/USI715U)
Non-lockout
Input voltage: 24VAC
Max. current load: 1.5A
Flame rectification system
(Model: HS780-34PL-308-A)
Hot surface ignition
Lockout
Input voltage: 24VAC
Max. current load: 1.5A
Prepurge: 34 sec.
Ignition attempts: 3
Module, Ignition
Module, Ignition
Used with gas valve models:
7000BDER & 7100DER
s8610u1003PDQ
S8610U3009
Intermittent ignition
Retry: 5 min.
Ignition Trial: 90 sec.
Intermittent ignition
Retry: continuous
Prepurge: 0 or 30 sec.
Ignition Trial: 15 or 90 sec.
Module, Ignition
Module, Ignition
Universal
Universal
For use in direct spark ignition systems
Replaces over 300 existing IP modules
Can be used on single/dual rod systems
Capable Controls version of Honeywell’s S8610U1003
For use in direct spark ignition systems
Replaces over 300 existing IP modules
Can be used on single/dual rod flame sensing
Honeywell’s replacement for the S8610U1003
s8910u1000
50A55843
Hot surface ignition
4 or 7 sec. lockout
Hot surface ignition
Input voltage: 25VAC
Prepurge: 0 sec.
Ignition trial: 7 sec
Module, Ignition
Module, Ignition
Universal
Provides 1-3 trials for ignition
Replaces over 100 HSI modules
For use in hot surface ignition systems to control
hot surface ignitor and flow of gas in appliances
50E47843
EM670
Replaces all White Rodgers
and virtually all competitive
Carbide Non-Integrated modules
Input voltage: 25VAC
60 Hz, 120 VAC, .55 AMP
CW/CCW rotation, 3000 RPM
Shaft: 1-1/4" length, 3/16" dia.
Stack Thickness: 5/8"
C-frame, shaded pole
Module, Ignition
Motor, Replacement Kit
Replaces: GEM EM670, ACME AM-4670, SUPCO SM-670, MARS90971
Used on refrigerators, freezers, condenser fans, vending machines,
vent hoods, exhaust fans and ventilators
EM673
Motor, Replacement Kit
Replaces:
50E47-50, 50E47-150, 50E47-834, 50E47-70
6 different program keys with corresponding color
coded timing labels. Program key determines…
trial for ignition, retries, prepurge and warm-up
time
190
60 Hz, 120 VAC, .55/.34 AMP
CW/CCW rotation, 3000/1550 RPM
Shaft: 1-1/4" length, 3/16" dia.
Stack Thickness: 5/8"
C-frame, shaded pole
Replaces: GEM EM673
Used on refrigerators, freezers, condenser fans, vending machines,
vent hoods, exhaust fans and ventilators
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
Pilot - Ptac Parts
SRC601
WP23X94
Kit, Heat Coil
Fuse
PTAC
Pilot, Burner
PTAC
5,000 watts
ZONELINE®
Nonprimary-aerated, insert
orifice-type pilot burner for main burner ignition.
For use with Q340 or Q390 thermocouples for
Pilotstat safety control operation.
Use with Q313 Thermopile Generator for
750mv Powerpile applications.
CER100
WP12X9
Insulator, Ceramic
Knob
PTAC
PTAC
1/2" extended shaft
“D” position
when knob is
viewed from back
in OFF position.
ZONELINE®
WP12X10002
PTAC
Knob
5/8" extended shaft
wrapped w/ foam strip
“D” position
when knob is
viewed from back
in OFF position.
.250"
Used on old Singer models
.250"
WJ73X10037
24A341
B1370738
Propeller
Sequencer
Sequencer
PTAC
PTAC
SPST
On: 1-20 sec.
Off: 40-110 sec.
13-3/4" dia.
ZONELINE®
PTAC
24V
ZONELINE®
Has (8) .250" male terminals
Has (7) .250" male terminals
Used on Goodman air handlers
90293Q
90370
620403
Relay, Fan
Relay, Fan
Transformer
PTAC
PTAC
250V
8 amp
18FLA
18LRA
12FLA @ 125V
8FLA @ 250V
Has (5) .250" male terminals
PTAC
Primary: 120V
Secondary: 24V
Capacity: 40VA
Has (5) .250" male terminals
RSKP0009
Kit, PTAC Control Board
This kit is designed for PTAC
units that use 208/230V
Kit includes:
board, control panel, transformer, wire enclosure, 4 thermistors with color
coded leads, 14-pin and 18-pin female housings, 18 jumper wires,
18 wire nuts, 2 screws, and 2 clips
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
191
HVAC heating repair parts
q314a4586
HVAC heating repair parts
Pumps
Armstrong
special order, non-stock item
With variations in size, capacity, voltage & horsepower, there are numerous stock
sizes available for quick shipment. When inquiring about complete pumps or
replacement parts, please have all name plate data ready when you call.
Circulators, Astro Series Fluid Lubricants
Applications include hydronic heating, chilled water, domestic hot water recirculation, heat recovery and solar heating
Model
Const.
Astro 30
Astro 30B
Astro 50
Astro 50B
Cast Iron
All Bronze
Cast Iron
All Bronze
Input
Watts
Full Load
H
L overall
W
L1
L2
L3
C
Weight
Amps
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) lbs. (kg)
80
.70
110
.82
Maximum Working Temp:
6-3/8
(162)
7
(178)
2-5/8
(67)
4-1/2
(114)
5-1/8
(130)
2-1/8
(54)
3-1/8
(79)
10
(22)
230˚F (110˚C)
Maximum Working Pressure:
140 psi (965 kPa)
Replacement Cartridge Design • Efficient/Quiet Operation • Universal Flange to Flange Dimension
Cast Iron or All Bronze Construction • CSA/UL Listed Circulator
Circulators, Series S & H In-Line
Model
Flange Size
(NPT)
HP
S-25
3/4" 1"
1-1/4" 1-1-2"
1/12
S-35
2"
1/6
S-45
2-1/2", 3"
1/4
S-46
3"
1/3
S-55
3"
1/2
S-57
3"
3/4
S-69
3"
1
H-32
1", 1-1/4"
1/6
H-41
1"
1/6
H-51
1-1/2"
1/4
H-53
1"
1/2
H-54
2"
3/4
H-68
2"
1-1/2
A
Order Number
3/4
(19.05)
Directly
Replaces
Taco #
174031-013 1ph 174031-043 1ph
110
7/8
(22.225)
1
(25.4)
1
(25.4)
1
(25.4)
1
(25.4)
1
(25.4)
7/8
(22.225)
3/4
(19.05)
3/4
(19.05)
7/8
(22.225)
7/8
(22.225)
7/8
(22.225)
174033-013 1ph 174033-043 1ph
121
174036-113 1ph 174036-143 1ph
121
Dimensions: inches (mm)
B
C
D
13-3/4
(349.25)
6-1/2
(165.1)
11-1/2
(292.1)
15
(381)
15-3/4
(400.05)
15-3/4
(400.05)
19-1/2
(495.3)
10
(254)
25
(635)
15
(381)
15-1/4
(387.35)
17-1/4
(438.15)
20
(508)
20
(508)
21-3/4
(552.45)
8-1/2
(215.9)
10
(254)
10
(254)
12
(304.8)
12
(304.8)
14-1/4
(361.95)
8-1/2
(215.9)
8-1/2
(215.9)
11-1/2
(292.1)
11-1/2
(292.1)
11-1/2
(292)
14
(355.6)
12-1/2
(317.5)
12-1/2
(317.5)
12-1/2
(317.5)
16
(406.4)
16-1/2
(419.1)
20-1/4
(514.35)
12-1/2
(317.5)
12-1/2
(317.5)
13-1/2
(342.9)
16-1/2
(419.1)
16-1/2
(419.1)
18-1/4
(463.55)
Bronze Fitted
All Bronze
174037-113 1ph 174037-143 1ph
106284-132 1ph
106284-136 3ph
106285-132 1ph
106285-136 3ph
116531-132 1ph
116535-136 3ph
106284-133 1ph
106284-137 3ph
106285-133 1ph
106285-137 3ph
116532-133 1ph
116536-137 3ph
131
132
133
–
174034-013 1ph 174034-043 1ph
111
174035-113 1ph 174035-143 1ph
113
116431-132 1ph 116432-133 1ph
1600
116439-132 1ph 116440-133 1ph
1612
116451-132 1ph 116452-133 1ph
1632
116523-136 1ph 116524-137 1ph
1636
Applications include hydronic heating and cooling, domestic water systems, multi-stage zoning and general industrial service
Seal/Bearing Assembly with
Interchangeable Shaft Module
2 series
3 series
4 series
5 series
192
Model
Converesion
Assembly
S-25 3/4
S25 1
S-25 1-1/4
S-25 1-1/2
Universal
810119-001
S-35
H-32 1
H-32 1-1/4
H-32 1-1/2
Universal
816549-091
S-45 2-1/2
S-45 3
S-46
H-41
Universal
816027-002
S-55
S-57
H-51
H-52
H-53
H-54
Universal
816032-000
Shaft Module
816999-041
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
bell & gossett
Circulators, Bronze Bodied System Lubricated
part#
103257
103258
103259
103261
103260
103316
103255
103252
Model#
Connection
HVAC heating repair parts
With variations in size, capacity,
voltage & horsepower, there are
numerous stock sizes available
for quick shipment. When
inquiring about complete pumps
or replacement parts, please
have all name plate data
ready when you call.
Pumps
Watts RPM
NBF-8S/LW
1/2" Sweat
39 2800
NBF-9U/LW Union
412800
NBF-10S/LW 1/2" Sweat
52 2800
NBF-12U/LWUnion
552800
NBF-12F/LWFlange 3/4", 1", 1-1/4", 1-1/2" 55 2800
NBF-18S
1/2" Sweat
90 3000
NBF-22U
Union
922940
NBF-22FFlange 3/4", 1", 1-1/4", 1-1/2"92 2940
103417
106189
Flanges
3/4"
1"
1-1/4"
Model: 100-BNFI, const: bronze, 115V, 1/12 HP 1-1/2"
Model: 100-NFI, const: iron, 115V, 1/12 HP
Pump, 3-Speed
Wet Rotor Circulator
106197
Pump, Standard Booster
Motor: NRF-25, 115V
Max working press: 150 PSI
Max operating temp: 225˚ F
102210
Pump, High Velocity Booster
Maintenance free
Quiet operation
For residential or light commercial hydronic systems
Shipped without the piping flanges & check valve.
Model: HV NFI, const: iron, 115V, 1/6 HP
Shipped without the piping flanges.
If required, order them from the chart….
103251
Iron
101001
101002
101003
101004
Bronze
101011
101012
101013
101014
Flanges
Iron
Bronze
1"
101005 101015
1-1/4" 101006 101016
1-1/2" 101007 101017
106507
Model: NRF-22, Const: iron
Pump, Little Red Booster
103260
115V, 1/20 HP
Model: LR 20 BF
Construction: iron
Model: NBF-12, Const: bronze
Pump, “Red Fox”
115V, 1/25 HP
Flanges
3/4"
1"
1-1/4"
1-1/2"
Iron
101001
101002
101003
101004
Bronze
101011
101012
101013
101014
Compact size, lightweight, single speed
motor, standard flange to flange dimensions.
Shipped without the piping flanges.
If required, order them from the chart….
bell & gossett
Assembly, Bearing
Order #
Iron
118844
185011
185260
186863
186865
189105
189134
189162
189163
189165
Bronze
189034
189165
*LCAC
Used with Pump
BF
BF
BF
BF
AI
BF
BF
IB
AB
IB
AB
IB
AB
Series 100
1510 series - 1" shaft
pd 38, pd 39, pd 40
1522 3/4" aab thru 1-1/2" aab
1522 3/4" aab thru 1-1/2" aab
1" pr, 2-1/2", ld 3", hd 3"
Series 100- includes impeller
1", 1-1/4", 1-1/2"
2-1/2"
2" & hv
2" & HV
NFI, 2" & HV
bnfi, 2" & HV
AB
IB
Series 100
Small dia. (5") 2", HV
* Liquid Contact Area Construction
AB- all bronze, AI- all iron, BF- bronze fitted, IB- iron body
Body
Gasket
Nut
Seal Kit
Oil
Wicks
Lockwasher
Flanges
3/4"
1"
1-1/4"
1-1/2"
Iron
101001
101002
101003
101004
Bronze
101011
101012
101013
101014
Pump Repair parts
185332LF
Assembly, Bearing
Front
Bearing
Key
Shaft
Bracket
Oil Well
Cover
Front
Bearing Screw
MORE
Compact size, lightweight, single speed
motor, standard flange to flange dimensions.
Also available in union connections.
Shipped without the piping flanges.
If required, order them from the chart….
Maintenance free
For use on B&G maintenance
free Series 60 pumps sizes:
1" x 1" x 5-1/4"
1-1/4" x 1-1/4" x 5-1/4"
1-1/2" x 1-1/2" x 5-1/4"
2" x 2" x 5-1/4"
Adapter ring gasket #P58542 must be ordered on all
pumps sizes — x — x 6-1/4"
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
193
HVAC heating repair parts
Pump Repair parts
bell & gossett
118368
Couplers
Gasket, Flange
Shaft Dia.
Order #
118473
118705
118708
118709
118723
186410
189110*
Motor
Pump
1/2"
1/2"
Series 100 prior to 4/91
Used with Pump
pd 35, pd 37, 60aa, 1522
1/2"
1/2"
3/4"
1/2"
Series 100, HV, PR, 1", 1-1/4", 1-1/2", 2"
pd 35, pd 37, 60aa, 1522
5/8"
1/2"
pd 35, pd 37, 60aa, 1522
1/2"
1/2"
2-1/2", ld 3", hd 3", hld 3", hhd 3"
1/2"
5/8"
60a,
1/2"
1/2"
Series 100, HV, PR, 1", 1-1/4", 1-1/2", 2"
* Pressed steel
Pumps after date code D19 (4/91) use a flat, full face, two bolt hole
gasket. As the gasket part numbers were not changed, specify “ring”
or “flat” when ordering.
Gaskets, Pump Body
Order #
Cast iron spring type except where noted
important! Coupler breakage is usually
caused by sagging motor mounts. Protect
your pump from premature failure.
Always replace both the coupler and the resilient motor mounts.
P04080
P04890
P05800
P48690
P57410
P57700
O.D.
Used with Pump
3-1/8"
Series 100
3-7/8"
1" thru 2-1/2", HV, 3" HLD & HHD
4-3/4"
pr, 2-1/2", ld 3", hd 3"
11-1/2"
1510b & bb, 1531
5-5/8"
pd 35 to 37, 60aa, 1522, 1535
7-7/8"
pd 38 to 40, 60a, 1510a
111031
189132
1/6 HP,
Used with: PR, & pumps w/ 6" dia. bearing assemblies: #189100 to #189106
Impeller
111034
1/12 HP
Used with: Series 100
1-7/8"
111040
1/4 HP
Used with: 2-1/2", LD 3
111042
2-3/4"
2-piece, non-ferrous
Used with Series 100 NFI, 100 BNFI boosters
Replaces Armstrong #812961-111
l23401
1/3 HP
Used with: HD 3
111061
1/6 HP
Used with: 2" NFI, 2" BNFI, HVNFI,
(5" dia) HVBNFI
169035
1/4 HP
Used with: 60 1" AA, 60 1-1/4" AA
Motor, Pump
115V, 1725 RPM
17076
Oiler, Zoom Spout
Oil, Lubricant
4 oz.
1-1/2 oz.
SAE-20 mineral
oil in plastic squeeze
tube marked with
proper amounts for oil
cups on motors and
bearing assemblies
117412LF CB-1/2S, FSWT
117413LF CB-3/4S, FSWT
117401LF CB-1S, FSWT
117415LF CB-3/4, FNPT
117416LF CB-1, FNPT
118223
Used with HP: 1/12, 1/6
118228
Used with HP: 1/3, 1/4, 1/2, 3/4
Rings, Motor
Mounting Resilient
High grade turbine oil lubricant
Has a 14" telescoping spout which
enables you to access those
hard-to-reach areas
Balance valve for both potable water & HVAC systems
Externally adjustable manual balance valve for easy adjustment
Positive shut-off service
Bi-directional design allows any installation configuration
Reduces pump energy requirements
Meets or exceeds stringent codes for potable water
Sold in sets of two
118395
p04883
Wicking Set, Oil
Valves, Circuit Setter
LF= lead free (contains less than 0.25% lead content by weight on wetted surfaces)
194
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
Pumps
TACO
110
Pump, “00” Series Cartridge Circulator
Pump,
110 Series Circulator
115V, 1/25 HP, 3250 RPM
Capacity: 11" to 20 GPM
Construction: iron
Flanges:
3/4", 1", 1-1/4", 1-1/2" (companion flanges not included)
115/60/1 V, 1/12 HP, 1725 RPM
Capacity: 7' to 35 GPM
Construction: iron
Flanges: 3/4", 1", 1-1/4", 1-1/2"
Larger capacities available, call for pricing
Compact, quiet & lightweight
System water lubricated- never requires oiling
Standard universal flange dimensions
Replaceable cartridge rebuilds the pump
1600C Cast iron bronze fitted
1600B All bronze
Pump, 1600 Series In-Line
115/60/1 V, 1/4 HP
Capacity: 20' to 55 GPM
Flanges: 1-1/2"
Quiet & dependable
Proven performance- residential & light commercial systems
Available in bronze construction for domestic hot water systems
Casting: Cast iron or bronze “in-line” construction. Permits line mounting in vertical
or horizontal run of pipe. Pressure rating to
175 psi.
Motor: Resilient mounted, drip proof sleeve
bearing motor especially selected for quite
operation
Maintenance: Low maintenance costs are
Coupler: Non-metallic sound deadening cou- assured due to parts flexibility. One bearpler parts flexibility. One bearing assembly
ing assembly (cartridge) and one seal fit all
(cartridge) and one seal fit all models from
models from 1/4 - 3 H.P.
1/4 - 3 H.P.
Taco
Parts, Replacements for 110-120 Circulators
Order #
110275RP
110223RP
110185RP
110361RP
111058RP
120067RP
110009RP
110127RP
HVAC heating repair parts
007F
Part
Used on Pump
Seal
All 110 to 120-12
Motor
HC, 110, 117
Motor
HDH, 111, 113
Bearing assembly
HC, 110, 117
Bearing assembly
HDH, 111
Bearing assembly
120-6 to 120-12
Coupler
All 110 to 120-12
Gasket Kit
110 to 113
Pump Repair parts
Parts, Replacements for 110-120 Circulators
Order #
1600868CRP
121151RP
131143RP
132096RP
1624053RP
1600160RP
1600050RP
Part
Used on Pump
Seal
1600 cartridge design
Motor
1/4 HP (115/60/1)
Motor
1/3 HP (115/60/1)
Motor
1/2 HP (115/230/60/1)
Coupler
All in-line pumps 1/4 - 1 HP
Cartridge
All -9, serial # pumps
Gasket Kit
All -9, serial # pumps
Relays
l8148E1265
l8148j1009
Immersion type controller combines high limit
protection with switching relay control of
burner and circulator circuits
Control circuit: 24VAC, 60Hz
Burner circuit: 24VAC, 60Hz
Circulator circuit: 120V, 60 Hz, 7.4 AFL
Well adapter and heat-conductive
compound included
Vertical or horizontal mounting
Immersion well only: #121371A (1/2"), #121371B (3/4")
Immersion type controller combines
high limit protection with switching
relay control of burner and circulator circuits
Control circuit: 24VAC, 60Hz
Burner circuit: 24VAC, 60Hz or millivolt
High Limit range: 140° to 240°F (60° to 116°C)
Well adapter and heat-conductive
compound included
Vertical or horizontal mounting
Immersion well not included
Immersion well only: #121371A (1/2"), #121371B (3/4")
Relay, Aquastat
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
MORE
Relay, Aquastat
195
HVAC heating repair parts
relays
RA89A1074
RA832A1066
SPST
DPST
Relay, Hydronic Switching
Relay, Hydronic Switching
Control circuit: two-wire low voltage
Resistive rating:
120VAC, 10; 240VAC, 6A
Used to switch 1 line voltage loads
Permit a low voltage controller or
thermostat to control a line voltage device
Built-in transformer provides 24VAC power
for the control circuit
Control circuit: two-wire low voltage
Resistive rating:
120VAC, 10; 240VAC, 6A
Used to switch 2 line voltage loads
Permit a low voltage controller or
thermostat to control a line voltage device
Built-in transformer provides 24VAC power
for the control circuit
90293q
R8222d1014 DPDT
Relay, Switching
SPDT
Relay, Switching
24V
Temp range: -40˚F – +150˚F
RBM type 84
Ind. amps @ 250V: 8 cont.
Inrush. amps @ 250V: 25
24Volt
277VAC: 15 Amp resistive
480VAC: 10 Amp resistive
Dimensions: 1-7/8"H x 2-5/32"W x 2-3/8"D
Base designed for easy replacement
Untaped coil assures cooler operation and
is less likely to trap moisture
thermocouples
q340a1066
q340a1074
q340a1082
q340a1090
18"
24"
30"
36"
Thermocouple
q390a1095
q390a1046
q390a1053
q390a1061
18"
24"
30"
36"
Thermocouple
Includes adapter
bag assembly, 5 clips & 5 sleeves
1950001
1970018
1970024
1970030
1970036
18"
24"
30"
36"
Uni-Couple®
The 1970 series unique
design allows for easy installation
to most pilot burners. The versatile zip nut may
be pulled, pushed or even threaded onto the
Uni-couple’s rolled threads for proper
positioning in every application.
1950532
k19at18
k19at24
k19at36
Thermopile,
750 Millivolt
(Universal Replacement)
36"
(includes PG9 adapter)
36"
(less PG9 adapter)
24"
36"
Thermocouple,
Super Slim Jim™
The 1950 thermopiles (pilot generators) are
designed for use on self-powered gas control
systems. They can be used to replace all
Robertshaw & similar competitive devices.
196
18"
1980018
1980024
1980030
1980036
18"
24"
30"
36"
Thermocouple,
Snap-Fit®
With its snap-fit
adapter, the 1980
series is the simplest
replacement thermocouple available today
k15ds18
k15ds24
18"
24"
Thermocouple,
Standard Baso
This popular
thermocouple is used for
Baso, Basoid, Basotrol
valves & switches
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
thermostats
q539a1014
Stop, Range
HVAC heating repair parts
50010944001
Subbase, Thermostat
Fan switch: On-Auto
System switch: Cool-Off-Heat or Off-Heat
Used with T87 to limit temperature to 75˚
Includes 2 set screws, 1 F and 1 C range stop
Provides system and fan switching and
mounting for Honeywell T87F thermostats.
490400
T87N1000
Universal Heating/Cooling
Fan switch: On-Auto
System switch: Heat-Off-Cool
Temp. range: 40˚F – 90˚F
24Volt- Heating/Cooling
System switch: Heat-Off-Cool
Fan switch: Auto-On
White
Thermostat, Wall
MERCURY FREE
For use with: Robertshaw 400/405 Series & 450/455 Series thermostats
Replaces #’s: T87F1859, T87F2790, T87F2873
Used w/: gas, oil or electric heat with
air conditioning, warm air, hot water,
high-efficency furnaces, heat pumps,
steam, gravity
Uses coverplate #50000066-001
T87K1007
T87N1026
White
Thermostat, Wall
MERCURY FREE
Temp. range: 40˚F – 90˚F
24Volt- Heating
White
Thermostat, Wall (Easy-to-See)
Temp. range: 40˚F – 90˚F
24 Volt- Heating/Cooling
System switch: Heat-Off-Cool
Fan switch: Auto-On
Replaces #’s: T87F1859, T87F2360,
T87F2782, T87F2790, T87F2816, T87F2873
Use with gas or oil heat
Heat only, 2-wire and 3-wire hot-water valve
Replaces #’s: T87F3467, T87F5199
Used with: gas, oil or electric heat with
air conditioning, warm air, hot water,
high-efficency furnaces, heat pumps,
steam, gravity
T834N1002
T822K1018
White
Thermostat, Wall
Temp. range: 50˚F – 90˚F
Low Voltage
24 Volt- Heating/Cooling
System switch: Heat-Off-Cool
Fan switch: Auto-On
White
Thermostat, Wall
MERCURY FREE
Temp. range: 50˚F – 90˚F
Low Voltage
24 Volt- Heating
Replaces #: T834C1137
For use with gas, oil, electric, heat pump,
forced warm air, hot water, steam or gravity
For use with gas, oil, forced warm air,
hot water, steam or gravity
t410a1013
t410B1004
White
Thermostat, Wall
Temp range: 40˚F – 80˚F
SPST switch action
Line Voltage
Electric rating:
19A @ 277 Volt, 22A @ 120/208/240 Volt
Suitable for electric heat
MERCURY FREE
White
Thermostat, Wall
Temp range: 40˚F – 80˚F
DPST switch action
Line Voltage
Electric rating:
19A @ 277 Volt, 22A @ 120/208/240 Volt
MORE
Subbase, Thermostat
Suitable for electric heat
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
197
HVAC heating repair parts
thermostats
T498B1512
T651A3018
Beige
Thermostat, Wall
Thermostat, Wall
Temp range: 44˚F – 86˚F
Heating/Cooling
SPDT switch action
Line Voltage
Electric rating: 9.8A @ 120V
Temp range: 40˚F – 80˚F
Line Voltage
Electric rating: 19A @ 277V,
22A @ 120/208/240V
Suitable for electric heat
Has thermometer, temperature range stops,
locking cover and recalibration decal
TH5220D1003
SC1001 Horizontal mount
SC1001V Vertical mount
White
Thermostat, Wall
Thermostat, Wall
Temp. range: 40˚F – 90˚F
Digital, Non-programmable
System switch:
Heat-Cool-Auto-Off-EmHeat
Fan switch: Auto-On
Non-programmable
Single stage- heat/cool or heat pump
White
Includes (2) AA batteries
for display window
ICM patented thermal intrusion barrier
Used on gas, oil & electric systems
SC2000N Battery powered
SC2001N Hardwired
SC1600 Battery powered
SC1601 Hardwired
Non-programmable
Single stage- heat/cool or heat pump
White
Non-programmable
Single stage- heat only, no fan switch
White
Thermostat, Wall
Thermostat, Wall
MERCURY FREE
MERCURY FREE
ICM patented thermal intrusion barrier
Used on gas, oil & electric systems
ICM patented thermal intrusion barrier
Used on gas, oil & hydronic systems
SC3000N Battery powered
SC3001N Hardwired
200401 Beige
Thermostat, Wall
Thermostat, Wall
MERCURY FREE
Temp range: 48˚F – 86˚F
Low Voltage
24 Volt- Heating
2 Wire
7 day programmable
Heat/cool or single stage heat pump
White
MERCURY FREE
ICM patented thermal intrusion barrier
Used on gas, oil & electric systems
Decorative wall plate is included
9200H White
9204H
Thermostat, Wall
Temp range: 50˚F – 90˚F
24V - Heating/Cooling
Low voltage
Includes subbase
Heavy-duty heat anticipator
For use with gas, oil or electric
heating/cooling systems
198
MERCURY FREE
White
Thermostat, Wall
MERCURY FREE
Temp range: 50˚F – 90˚F
24 Volt- Heating
Low voltage
Includes subbase
Heavy-duty heat anticipator
For use with gas, oil or electric
heating/cooling systems
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
thermostats
White
1E30N910
MERCURY FREE
Thermostat, Wall
White
HVAC heating repair parts
9204v
Thermostat, Wall
Temp range: 50˚F – 90˚F
Low Voltage
Includes Subbase
24 Volt- Heating
Temp range: 50˚F – 90˚F
Low Voltage - White
24 Volt- Heating
MERCURY FREE
Heavy-duty heat anticipator
For use with gas, oil or electric
heating/cooling systems
1E56N444
White
1F56N444 White
MERCURY FREE
MERCURY FREE
Thermostat, Wall
Thermostat, Wall
Temp range: 50˚F – 90˚F
Low Voltage- SPDT
24 Volt- Heating/Cooling
System switch: Heat-Off-Cool
Fan switch: Auto-On
Temp range: 50˚F – 90˚F
Low Voltage
24 Volt- Heating/Cooling
System switch: Heat-Off-Cool
Fan switch: Auto-On
Replaces #1F36910
Anticipator Type: Adjustable
For use with gas, oil or electric
heating/cooling systems
Anticipator Type: Adjustable
For use with gas, oil or electric
heating/cooling systems
HC7176
110202
110326
The “Landlordstat”
24V
Model: 220RTSP
Inlet: 1/2" pipe
Outlet: 1/2" inv. flare
Shank: 1-3/8", Element: 5-1/2"
Model: R110RTS
Inlet: 1/2" pipe
Outlet: 1/2" inv. flare
Shank: 1-1/4", Element: 5-1/2"
Thermostat,
Wall
Thermostat,
Gas Water Heater
Includes (2) AA batteries for backup
Can be preset and not tampered with
Thermostat,
Gas Water Heater
Replaces model #R110RTSP
Totally regulated, regulator set at 4.0" W.C.
Pilot gas is NOT regulated
Regulator set at 3.5" W.C.
transformers
AT20A1123
AT140A1000
120Volt, 20VA
Primary - 120Volt, Secondary - 24Volt, Capacity - 40VA
Transformer
Transformer
MOUNTING OPTIONS: Vertical or horizontal
foot mounting or direct mounting
MOUNTING OPTIONS:
Foot or plate mounting for use on 4"x 4" in.,
4" octagon, and 2" x 4" electrical boxes; and
clamp mounting via a junction box knockout
Designed for any 24V control system
(thermostats, gas valves and relays)
AT72D1683
90113
Primary - 120Volt
Secondary - 24Volt
Capacity - 40VA
Primary: 120VAC
Secondary: 24VAC
Ind. Rating @ 250vac: 3/4hp, 12A
Res. Rating @ 250vac: 15A
Transformer
SPDT
Fan Control Center (RBM)
MOUNTING OPTIONS:
Foot mounting; plate mounting for use on
4"x 4" in., 4" octagon, and 2" x 4" electrical
boxes; and clamp mounting via a junction
box knockout
Designed for any 24V control system
(thermostats, gas valves and relays)
Mounts to 4" junction box
Compact transformer & relay provides low
voltage control of line voltage for fan motors
and auxiliary circuits
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
199
HVAC heating repair parts
Valves
110192
ORDERING NOTES FOR
PRESSURE & RELIEF VALVES
Valve, Reducing
1/2"
#fb-38
Replaces models FB-3 & FB-8
1. Specify pipe inlet & outlet size if uncertain.
2. Specify pressure setting desired, if differnet than shown.
Brass body
Equipped with fast fill feature
Factory set to maintain 12 lbs. system pressure
Field adjustable 10-25 psig.
3. In addition to STD settings shown, other
settings in 5lb. increments are available
within STD range. For additional 10% cost.
374A-3/4-30
174A-3/4-30
Series 374A
3/4" female in and out, factory set at 30 lbs.
Relieving capacity is 550,000 BTU/Hr
Series 174A
3/4" to 2" female in and out
Relieving capacity is up to 14,370,000 BTU/Hr.
Valves, Relief A.S.M.E. Water Safety
for Hot Water Supply Boilers
Valve, Relief A.S.M.E. Water Safety
for Hot Water Supply Boilers
Iron body with forged bronze inlet
Same application as 174A listed below
Bronze body
Meets Military Spec., MIL-V-136-12D, Type III
100XL-4-150
V8043E1012
Valve, Zone
Valve, Relief Temperature & Pressure
wfor Water up to 1000,000
24V
3/4" sweat
18" lead wires
Series 100
3/4" to 2' female in and out
Relieving capacity is up to 14,370,000 BTU/Hr.
802360JA
Replacement Motor
Valve, Zone
24V
3/4" sweat
Terminal board connector
Motor can be replaced
without breaking
line connections or
draining the system
5702
5712
1/2" sweat
3/4" sweat
Valve, Zone
24V
125 PSIG
65' pump head
2 position zone valve
Manual opener with automatic recycle
Valve has an actuator motor and valve
assembly for controlling flow of hot and/or cold water
Includes end switch for sequencing auxiliary equipment
Permits accurate temperature
control of individual rooms or
groups of rooms in residences
or commercial buildings
571004RP
1311102
Valve & seat assem. (B)
A
555050RP
Power unit. (A)
Valve, Zone Repair Kit
For models 570, 571, 572, 573
200
Motor can be replaced
without breaking
line connections or
draining the system
2 position zone valve
Manual opener with automatic recycle
Valve has an actuator motor and valve
assembly for controlling flow of hot and/or cold water
Includes end switch for sequencing auxiliary equipment
Bronze body
ANSI Z21.22 certified
Meets Military Spec., MIL-V-136-12D, Type III
V8043F1036
802360JA
Replacement Motor
B
Valve, Hydronic Zone
3 wire
3/4" tubing size
24V valves with
push-in wiring panel & auxiliary switch
Time cycle: open 45 sec, close 45 sec
F190097
Replacement Motor
Quiet operating
Auxiliary switch contacts control burner
or circulator relay
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
valves
Valve, Conversion Kit For
Modu-Mate Zone Valves
109017
Model # CTS-7524
Valve, Comfort-Trol Zone - 24V
109024 189139 V01340 189137 189138 (1)
(2)
(3)
(4)
(5)
Operator
Bonnet & Retainer
Cover
Heat Motor ONLY
Gland Assem
HVAC heating repair parts
109054
3
4
1
Operator is
inside of cover
2
Heat motor
is inside of
operator.
5
Includes Pipe
The conversion kit listed above consists of
parts 1 thru 5 shown to the right of this box
under Comfort-Trol zone valve #109017.
Compact, quiet operating 24-Volt Zone Control Valve.
Operates at liquid temperature up to 240°F and working
pressure up to 125 PSIG. 3/4" sweat connections.
013G8250
013G8252
Operator, RA2000
Operator, RA2000
Zone Valve
Zone Valve
Valve mounted sensor & dial
Valve mounted dial with remote sensor
Ideal for baseboard and free-standing radiators where the heating
unit is not obstructed by furnishings that interfere with air circulation
around the sensor. This operator is always installed horizontally.
Ideal for convectors and free-standing radiators where the heating unit
is enclosed or obstructed by furnishings. Remote can be installed on
a wall where non-restricted air can flow over it.
013G8562
013G8565
013G8252 + 013G8070
Zone Valve
6' capillary
Zone Valve
6'5" capillary
Operator & Adapter, RA2000
Operator, RA2000
Combined remote mounted dial & sensor
Ideal for convectors where thevalve is inaccessible to the user.
Remote dial & sensor can be installed on a wall where non-restricted
air can flow over it.
Replaces old #0137001
013G8252
013G8250 + 013G8072
013G8252 + 013G8072
013G8020
Operator & Adapter, RA2000
Operator & Adapter, RA2000
3/4" Straight x 1-1/4" NPT
Zone Valve
013G8072
013G8252
Replaces old #01341100
Zone Valve
013G8252
Replaces old #01341102
013G8072
013G8070
Valve Body, RA2000
For hot water 2 pipe systems
Low pressure steam (up to 15 psig)
current Pricing can be found on our website
All logos, trademarks, part numbers, photos & illustrations are intended solely for identification. Items
offered for sale are not represented to be manufactured by the company that built the original equipment.
PHONE: 800-843-0903 • FAX: 800-344-1848 • WEB: www.pdqsupplyinc.com • FB: facebook.com/pdqsupplyinc
201