ua
ir
e
Control Panel
Products
pn
e
Pneumatic Push Button Valves,
Rotary Selector Switches,
Pneumatic Counters & Visual
Indicators for Control
Panel Mounting
Section N
Two Hand Control ...................................................... 2
Mounting Instructions ................................................. 3
Valve Bodies & Accessories ...................................... 4
Valve Body Dimensions & Assembly ......................... 5
Push Buttons .............................................................. 6
Selector Switches ....................................................... 7
Rotary Selector Switches ........................................... 8
Pneumatic Counters ............................................. 9-10
Pneumatic
Pneumatic Timers .............................................. 11-12
Visual Indicators ....................................................... 13
Accessories ........................................................ 14-15
Bold text part numbers are standard.
Standard text part numbers may have longer lead times.
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatic
N
Catalog 0600P-7/USA
Modular Push Button Valves
ua
ir
e
Features
Control Panel Products
Two Hand Control
• The pre-assembled two-hand control enclosure
occupies both hands of an operator by requiring
nearly simultaneous operation of two pushbuttons
• Poppet – snap-acting (no spools)
• Same air as in cylinders – Filtration: 40 micron
• No lubrication required
General Characteristics
Operating Pressure:
40 to 120 PSI (3 to 8 bar)
Permissible Fluids:
Air or neutral gas 40 micron filtration, lubricated or dry
Flow at 90 PSI (6 bar):
7 SCFM (200 l/mn ANR)
Operating Temperature:
-5°F to 140°F (-15°C to 60°C)
Below 40°F (5°C), an air dryer is required
Storage Temperature:
-40°F to 160°F (-40°C to 70°C)
Number of operations with dry air at 90 PSI (6 bar),
68°F (20°C), frequency 1 Hz:
1 Million Operations
Vibration resistance:
Conforms to section 19-2 of bureau Véritas regulations
(November 1987)
Materials:
Body: glass filled nylon
Operating head: zinc alloy and plastic
Connections:
5/32" instant
PXPC111
• If output “S” disappears for any reason, “A” and “B” must
be nearly simultaneously actuated to again provide
output “S”.
• Since output “S” is regenerated it appears sharply, at full
force (snap-acting), and is quickly exhausted upon
deactivation. In addition the module is not affected by the
length or diameter of tubing used for output “S”.
!
These devices should NOT be used in any application
involving rotary clutch presses. Two hand control modules
do not of themselves insure the safety of any machine.
Users and original equipment manufacturers are responsible
for making sure that installations meet all relevant safety
regulations.
pn
e
Model Number
PXPC111
Mounting
Approvals:
Dimensions
Inches (mm)
5/32" (4mm) Instant
Push-in Fitting (x2)
8.84
(224,6)
• In accordance with European Standard EN 574 September 1996
• Conforms to the model that has obtained CE Type Test
Certificate No. 02526 520 4631 0397
Operation
WARNING
1.13
(28,5)
3.41
(86,5)
A
P
S
B
• Output “S” will appear only if “A” and “B” are
simultaneously operated (within .5 seconds or less of
each other).
• If the operator actuates only one pushbutton, either “A”
or “B”, or if both “A” and “B” are actuated but at an
interval greater than .5 seconds, output “S” will not
appear.
• Output “S” is regenerated by supply “P”. Output “S” will
therefore disappear if supply “P” is cut off.
• Output “S” will disappear if either “A” or “B” is released.
2
Pneumatic
1.63
(40,1)
8.78
(223)
.50
(12,7)
13.38
(339,7)
7.09
(180.0)
.59
(15,1)
2.76
(70.0)
.25
(6,4)
3.28
(83,3)
.25 Dia.
2 Places
Ø (6,35)
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatic
Control Panel Products
Push Buttons, Switches & Valve Bodies
Catalog 0600P-7/USA
Mounting Instructions
Mounting
ua
ir
e
Type of Switching: Universal 3-Way: Valve can be connected either as NP or
NNP as required by connecting the primary air supply to port 1 or port 3.
NNP
NP
3
2
1
NNP:
Normally Non-Passing.
NP:
Normally Passing.
2
NNP + NNP: Double Switch Body, Both Normally Non-Passing.
NNP + NP:
Normally Non passing and Normally-Passing.
NP + NP:
Both Normally Passing.
Fluid Power
Electrical
Universal Description
Function
Symbol
Function
Symbol
2-Way
Normally Non-Passing
(NNP)
Normally Open
(N.O.)
Normally Closed
(N.C.)
Normally Passing
(NP)
Normally Closed
(N.C.)
Normally Open
(N.O.)
Combination of Output Devices
On a Single Mounting Block
3-Way
Assembling Output Devices
and Heads On ZB5 Series
Mounting Block
Up to 3 output devices (valves or electrical contacts) can
be mounted side by side on 1 mounting block.
pn
e
Note: The central position can only be activated by push
button heads.
Electrical contacts and valves can be combined either
side by side, or by mounting the valve on the back of the
electrical contact.
Side by Side
Combination
Combination by Mounting Valves On
the Back of the Electrical Contact
3
Pneumatic
Specifications
Air Quality
Standard Shop Air, Lubricated or Dry ........ 40 µm Filtration
PXBB3• .................................................................... Cv=.08
PXBB4• .................................................................... Cv=.18
Materials
Body ............. Brass, Stainless Steel, Auminum, Polyamide
Operating Head .................................... Zinc Alloy & Plastic
Operating Positions
All Positions
Operating Pressure
PXBB3• – 15 to 115 PSIG (1 to 9 bar)
PXBB4• – 15 to 145 PSIG (1 to 10 bar)
Ports
Standard: 5/32" Instant for Semi-Rigid Nylon or
Polyurethane Tube
Temperature
Operating ............................ 5°F to 140°F (-15°C to + 60°C)
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatic
N
Control Panel Products
Ordering Information
Catalog 0600P-7/USA (Revised 8/16/04)
Valve Bodies & Accessories
ua
ir
e
For Use With 22mm (7/8") Metal Operating Heads 5/32" Instant Connections
3/2 Valve Bodies with
Mounting Ring
Part
Number
PXBB3111B
PXBB3121B
Connections
5/32" Instant
5/32" Instant
Function
3/2
3/2
PXBB4131B
5/32" Instant
3/2
Type of
Switching*
NNP
NP
Universal
3-Way
Note: • Mount up to 3 valves on mounting ring for push buttons.
• Mount up to 2 valves on mounting ring for selector switches.
PXBB3111B
PXBB4131B
Additional Valve Bodies
PXBB3911
Part
Number
PXBB3911
PXBB3912
PXBB3921
PXBB3922
PXBB4931
PXBB4932
PXBB4931
PXBB4932
Accessories
Connections
5/32" Instant Straight
5/32" Instant Swivel
5/32" Instant Straight
5/32" Instant Swivel
5/32" Instant Straight
5/32" Instant Swivel
Function
Type of
Switching*
3/2
NNP
3/2
NP
3/2
Universal
3-Way
Metal
Plastic
ZB4BZ009
ZB5AZ009
ZBE101
pn
e
Electrical Switch Bodies
When combined with pneumatic valves ,these contact
blocks allow different forms of power to be provided from
a single push button. Can be mounted with both types of
valves PXBB3 / PXBB4.
Electrical Specification: 240V, 10Amp
Part Number
Type of Contact
ZBE101
Normally Open (NO)
ZBE102
Normally Closed (NC)
Guard & Nut Tightening Tool
.157 (4)
Dia.
2.17
(55)
ZB2BZ19
1.50
(38)
ZB5AZ905
Part
Number
Color
ZB2BZ19
Black Plastic
ZB5AZ905
3 (76)
Dia.
Mounting Ring for Valve Bodies, Switch Bodies and
Operating Heads
To make up a complete push button with one to three
switching elements with 5/32" instant connections, use
this mounting block and select the operating heads and
bodies in this Section.
Part Number
Description
ZB4BZ009
Metal Mounting Ring
ZB5AZ009
Plastic Mounting Ring
To make up a complete selector switch with one or two
switching elements with 5/32" instant connections, use
this mounting block and select the operating heads and
bodies in this Section.
Part Number
Description
ZB4BZ009
Metal Mounting Ring
ZB5AZ009
Plastic Mounting Ring
—
Description
Guard for 60mm
Mushroom Heads
Plastic Head (ZB5) Mounting
Nut Tightening Tool
NOTE: BOLD ITEMS ARE READY (STOCK)
4
Pneumatic
Note: To release push button from mounting ring, pull lever on top of
mounting ring up and remove push button operator. To
assemble push button operator to mounting ring, align arrows
and snap into place.
Note: Plastic Mounting Ring ZB5AZ009 to be used with ZB5 Plastic
Operating Heads.
Metal Mounting Ring ZB4BZ009 to be used with ZB4 Metal
Operating Heads.
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatic
Control Panel Products
Valve Bodies
Catalog 0600P-7/USA
Dimensions & Assembly
ua
ir
e
PXB-B3 Dimensions
2.01
(51)
1.83
(46.5)
.04 to .24
(1 to 6)
1.95
(49.5)
ø.89 (22.5)
2.34
(59.5)
.04 to .24
(1 to 6)
1.58 Minimum Distance
(40) Between Centers
PXB-B4 Dimensions
1.18
(30)
1.82
(46.2)
2.20
(56)
Tube Bending Radius
For PXBB3 and PXBB4
4 mm O.D. x 2 mm I.D. Tube
= Minimum 0.39 (10) Radius
.04 to .24
(1 to 6)
2.58
(65.5)
Assembly
4 mm O.D. x 2.7 mm I.D. Tube
= Minimum 0.59 (15) Radius
.04 to .24
(1 to 6)
2.95
(75)
Assembling PXB Valves On Mounting Block
1 2
3 4
2
3
CLICK
pn
e
Top
4
1
Assembling PXB Valves On the Back of the Electrical Contact
2
3
CLICK
4
1
5
Pneumatic
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatic
N
Control Panel Products
Ordering Information
Catalog 0600P-7/USA (Revised 8/16/04)
Push Buttons
ua
ir
e
For Use With PXBB Valve Bodies and ZBE Electrical Switch Bodies
Push Buttons
ZB4BA4
ZB4BL2
Plastic Head
ZB5**
Part
Number
ZB5AA2
ZB5AA3
ZB5AA4
ZB4BP2
ZB5AL2
ZB5AL3
ZB5AL4
1.13
(29)
1.13
(29)
.50
(13)
.38
(10)
Extended
Flush
1.13
(29)
.63
(16)
Booted
Metal Head
ZB4*
Part
Number
ZB4BA2
ZB4BA3
ZB4BA4
ZB4BA5
ZB4BA6
ZB4BL2
ZB4BL3
ZB4BL4
ZB4BL5
ZB4BP2
ZB4BP3
ZB4BP4
Color
Black
Green
Red
Yellow
Blue
Black
Green
Red
Yellow
Black
Green
Red
Function Description
Spring
Return
Flush
Spring
Return
Extended
Spring
Return
Booted
* ZB4*** Model Numbers are Metal Head Operators
** ZB5*** Model Numbers are Plasticl Head Operators
pn
e
Mushroom Head Push Buttons
ZB4BC2
Spring
Return
ZB4BR2
2.38
(60)
1.50
(38)
1.25
(32)
Part
Number*
ZB4BC2
ZB4BC3
ZB4BC4
ZB4BT2
ZB4BT4
ZB4BR2
ZB4BR3
ZB4BR4
Color
Black
Green
Red
Black
Red
Black
Green
Red
Function
Description
Spring Return
Ø 40mm Head
Latching
Push-Pull
Spring Return
Ø 60mm Head
* ZB4*** Model Numbers are Metal Head Operators
Push / Pull
1.38
(35)
Push / Push Buttons
Part
Number*
ZB4BH02
ZB4BH03
ZB4BH04
Color
Black
Green
Red
Function
Description
Detent
2-Position
Flush
* ZB4**** Model Numbers are Metal Head Operators
ZB4BH02
NOTE: BOLD ITEMS ARE READY (STOCK)
6
Pneumatic
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatic
Control Panel Products
Ordering Information
Catalog 0600P-7/USA (Revised 8/16/04)
Selector Switches
ua
ir
e
For Use With PXBB Variable Composition Switch Bodies
Selector Switches
ZB4BD3
1.13
(29)
1.06
(27)
Standard Black Handle
Part
Number*
Description
ZB4BD2
Maintained
Spring Return
ZB4BD4
from Right to Left
ZB4BD3
Maintained
Spring Return to Center
ZB4BD5
from Left and Right
Maintained Right
ZB4BD7
Spring Return from
Left to Center
Maintained Left
ZB4BD8
Spring Return from
Right to Center
Long Black Handle
ZB4BJ2
Maintained
Spring Return
ZB4BJ4
from Right to Left
ZB4BJ3
Maintained
Spring Return to Center
ZB4BJ5
from Left and Right
ZB4BJ3
.94 1.50
(24) (38)
1.06
(27)
Knob Lever
Standard Selector
Function
2-Positions
3-Positions
3-Positions
3-Positions
2-Positions
3-Positions
* ZB4*** Model Numbers are Metal Head Operators
Key Operated Selectors
pn
e
1.13
(29)
.88
(22)
1.19
(30)
ZB4BG2
Mushroom Head Push Buttons
with Key Select
2.38
(60)
Key Operated
Part
Number*
Key Withdrawal
ZB4BG2
Left
ZB4BG4
Left and Right
ZB4BG3
Center
ZB4BG5
Left and Right
ZB4BG7
Center
Function
2 Maintained
Positions
3 Maintained
Positions
3 Positions
2 Spring Return
to Center
* ZB4*** Model Numbers are Metal Head Operators
Part
Number*
Color
ZB4BS54
Red
ZB4BS14
Red
ZB4BS64
Red
ZB4BS24
Red
Function
Description
Latching
Turn to Release
Ø 40mm Head
Key
Latching
Latching
Turn to Release
Ø 60mm Head
Key
Latching
* ZB4**** Model Numbers are Metal Head Operators
1.38
(35)
ZB4BS24
NOTE: BOLD ITEMS ARE READY (STOCK)
7
Pneumatic
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatic
N
Control Panel Products
22mm (7/8")
Catalog 0600P-7/USA
Rotary Selector Switches
ua
ir
e
Application
These switches (valves) provide a single discrete output
as prescribed by a selector position. Each selector
position controls one switch output, all other switches will
be non-passing and connected to
exhaust.
Operation
Rotary knob selector, black, with 2 1/2" x 2 1/2" legend
plate black and red. No mechanical stop. Switches all
normally non-passing (NNP).
8-Position
Technical Data
Operating Pressure: 0 - 120 PSIG
4 Positions, 4 Pneumatic Switches
Nominal Orifice Size: 1/16" (Cv = .03)
Connection: Integrated instant connection for 5/32" O.D.
tubing
2
1
3
Operating Temperature:
4
5° to 140°F (-15° to 60°C)
Operating Principle: Poppet
1
2
Operating Medium: Dry or lubricated compressed
air or inert gases, 40 micron filtration.
4
3
8 Positions, 8 Pneumatic Switches
2
1
8
7
2
4
5
6
3
4
5
6
7
Model Selection
8
pn
e
1
3
Description
4-Position Rotary Selector
8-Position Rotary Selector
Model Number
PXBDD104
PXBDD508
Weight
7.5 oz.
11.1 oz.
Dimensions
1.14
(29)
1.57
(40)
.06 (2) to
.25 (6)
1.06
(27)
8
Pneumatic
B1
4 positions
8 positions
B1
2.36"
3.54"
2.83
(72)
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatic
Control Panel Products
Totalizing & Predetermining
Catalog 0600P-7/USA
Pneumatic Counters
Predetermining
PCTA11
Surface Mount
Application
ua
ir
e
Totalizing
PCTB11
Flush Panel Mount
PCPA11
Application
These pneumatic counters use an air input to control a
mechanical counting assembly. Input signals to be
counted cause the “units” figure wheel to rotate one half
digit forward. When the input signal is exhausted, the
figure wheel moves through the remaining distance to
complete the digit display. Thus the unit must be
pressurized and exhausted in order for the count to be
completed. Totalizing counters provide a display only.
This pneumatic counter uses an air input to control a
mechanical counting assembly. The unit must be
pressurized and exhausted in order for a count to be
completed. Predetermining counters, when the set count
is reached, provide a pneumatic output. Predetermining
count is set on the bottom keys and permanently
displayed on the lower readout. Top displays
accumulated count. Reset leaves predetermining count
unchanged.
Symbol
Z
Y
0
Symbol
With pneumatic
or manual reset
A
Z
Y
0
P
Model Selection
pn
e
Model Selection
Counting Range
0 to 999,999
0 to 99,999
Model Number
PCTA11
PCTB11
Addition with
pneumatic or
manual reset
Weight
2.7 oz.
2.1 oz.
Counting Range
0 to 99,999
Model Number
PCPA11
Weight
4.1 oz.
Technical Data
Working Pressure: 30 - 140 PSIG
Pneumatic resetting:
Filtration: 40 micron max
To avoid counting mistakes follow these pointers:
Air supply: Oil free or slight oil content
• Minimum reset tubing length 20"
Connection: Instant connection for 5/32" OD tubing
• Output signal may not be used for resetting
Test speed: Count 20 impulses per second
• Count signal must be off when resetting
Time between pulses: 12 ms minimum
Reset signal: 130 ms minimum
Time required between end of reset signal and next
count signal: 50 ms minimum
Counter consumes no air while counting.
9
Pneumatic
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatic
N
Control Panel Products
Pneumatic Counters
Catalog 0600P-7/USA
PCTA11
1.50
(38)
=
=
ua
ir
e
Dimensions
1.06
(27)
=
=
3.94
(100)
5/32" Dia.
(3) Places
3.54
(90)
3.15
(80)
=
=
=
=
5/32" OD Tube
Connection
2.09
(53)
PCTB11
.63
(16)
5/32" OD
Tube Connections
.18 (5) Dia.
2 Places
=
=
1.50
(38)
1.97
(50)
1.97
(50)
2.36
(60)
Y
=
Connections:
• Count inputs to Z
• Reset inputs to Y
=
=
1.28
(33)
=
=
2.46
(62)
.35
(9)
pn
e
=
=
Z
1.02
(26)
1.23
(31)
=
PCPA11
.18 (5) Dia.
2 Places
=
=
2.46
(62)
2.95
(75)
.53
(13)
1.28
(33)
2.46
(62)
10
Pneumatic
Y
.91
(23)
P
A
=
1.23
(31)
Connections:
• Supply to P
• Reset to Y
• Count input to Z
• Output to A
=
=
=
2.36
(60)
=
Z
2.00
(51)
=
=
5/32" OD
Tube Connections
=
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatic
Control Panel Products
Time Delay Relays
Catalog 0600P-7/USA
Pneumatic Timers
Time Delay Relay
with PZUA12 Subbase
without Subbase
PRTA12
ua
ir
e
Time Delay Relay complete
PRTA10
Symbol
Operating Principle
The time delay relay is entirely pneumatic. Air supply to
the timing head is taken from ambient atmosphere. The
timing function is therefore independent of line pressure.
As a result, repeatability is unaffected by variations in
supply pressure, temperature or contamination of supply.
ON Delay
S
t1 0
S
OFF Delay
t1 0
a
a
Model Selection without Subbase
Model Selection with Subbase
Function
Timing Range
Model Number
Weight
ON Delay
0.1 to 3 s
PRTE10
4.4 oz.
ON Delay
0.1 to 30 s
PRTA10
4.4 oz.
ON Delay
10 to 180 s
PRTB10
4.4 oz.
OFF Delay
0.1 to 3 s
PRTF10
4.4 oz.
Function
Timing Range
Model Number
Weight
OFF Delay
0.1 to 30 s
PRTC10
4.4 oz.
ON Delay
0.1 to 30 s
PRTA12
5.82 oz.
OFF Delay
10 to 180 s
PRTD10
4.4 oz.
3-Port Subbases (with Integral Lock for Stacking)
PZUA12
PZUC12
Model Selection for Subbase
Symbol
Signal
(A or 1)
1/8" NPT
Ports
Cascade
pn
e
Common Input
Output
(S or 3)
Supply
(P or 2)
Description
Model Number
Weight
Common Input
PZUA12
1.4 oz.
Cascade
PZUC12
1.58 oz.
Individual
Mount
Plated
Zinc
BNC3P10
3.1 oz.
11
Pneumatic
BNC3P10
!
CAUTION
Unit can be improperly assembled to BNC3P10 base. For proper
orientation, the side with the white plastic filter must be positioned
over Port #1.
Replacement Filter
a (input)
PPRL23
Input Cylinder
PPRL20
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatic
N
Control Panel Products
Pneumatic Timers – Time Delay Relays
Catalog 0600P-7/USA
Technical Data & Dimensions
Specific Characteristics
Working Pressure: 40 to 120 PSIG (3 to 8 bar)
Function
Operation Medium:
ua
ir
e
Technical Data
Key:
Dry or lubricated compressed air
or inert gases, 50 micron filtration.
Control signal a
- - - - - - Output signal S
Connection: Instant connection for 5/32" O.D. tubing
PRT-E
PRT-A
PRT-B
Flow Rate at 90 PSI: 6.4 (6 bar) in SCFM
Cv: 0.14
Pressure
Working Temperature: 5°F to 140°F (-15°C to 60°C)
0
Time
Adjustable time
Response Time: 2 to 3 ms
With
ON
delay
Mounting: 35mm DIN rail
Repeatability: ± 5% / 5 operations
PRT-F
PRT-C
PRT-D
Delay is set by turning knob. One 360° turn
covers complete timing range. When white
line on dial is set at top dead center, TDR
goes to infinity. This feature facilitates
machine set-up.
D
E
Adjustable time
A
0
BNC3P10
.55
(14)
.87
(22)
1.34
(34)
PZUC12
.63
(16)
PZUA12
B
C
B
.87
(22)
1.18
(30)
1.34
(34)
1.34
(34)
12
Pneumatic
.08 (2)
.22
(6)
3 Ports
2 Mtg. holes
Tapped 1/8
M4 x 0.7
x .236 deep
ø .17 (4.2)
B
1.58
(40)
A
A
D
.59
(15)
1.00
(25)
1
A
1.58
(40)
Clip
2
1
B
C
ø .17 (4.2)
A
DIN Rail
2
3
.67
(17)
1.61 (41)
.87
(22)
.63
(16)
3
1.26
(32)
.90 (23)
3.82
(97)
DIN Rail
1.58
(40)
.197 (5)
PRT-A12
1.30
(33)
.55
(14)
.63 (16)
2 Mtg. holes .17 Dia. thru
C'bore .29 Dia. x .19 deep
3 holes
.216 .118 Dia. 1 holes
.130 Dia.
(5)
x .138 deep
.45 (11)
pn
e
PRTA12
.59
(15)
Time
With
OFF
delay
The greater
the angle, the
longer the
delay.
B
F
0
+
C
Dimensions
Pressure
.08 (2)
Setting:
1.18
(30)
A
inch
.55
mm
14
B
.39
10
C
.59
15
D
.59
15
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatic
Control Panel Products
22mm (7/8")
Catalog 0600P-7/USA
Visual Indicators
ua
ir
e
Application
Pneumatic visual indicators replace electrical pilot lights
in pneumatic control systems. Visual indicators show
the presence or absence of pneumatic signals such as
E-stop, part present, etc.
Symbol
Operating Principle
A pneumatic signal inverts diaphragm, which pushes
an arm and rotates the indicator ball.
In unactuated position, ball shows black side.
In actuated position, ball shows highly visible colored
side.
During rotation, arm slides in a slot providing a sinusoidal
movement: smooth start, fast rotation, smooth stop. This
avoids shocks and insures long indicator cycle-life.
Unactuated State
Mounting
Actuated State
1) Indicator body is positioned on panel
2) Transparent top is assembled to body by screwing top
into collar.
3) Indicator assembly is fastened to panel by screwing
pinion drive, thus moving collar forward to grip panel.
pn
e
Technical Data
Operating Pressure: 15 - 120 PSIG
Connection: Integrated instant connection for
5/32" O.D. tubing
Operating Temperature: 5°F to 140°F (-15°C to 60°C)
Operating Principle: Diaphragm
Operation Medium: Dry or lubricated compressed air or
inert gases, 40 micron filtration.
Dimensions
.88 (22) Dia.
.06 (2) to
.25 (6)
1.10
(28)
2.13
(54)
1.56
(40)
.63
(16)
1.19
(30)
13
Pneumatic
Model Selection
Model
Number
Color
Indication
Bezel
PXVF1214
Orange
Off
Black Plastic
PXVF131
Green
On
Black Plastic
PXVF141
Orange
On
Black Plastic
PXVF151
Yellow
On
Black Plastic
PXVF161
Blue
On
Black Plastic
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatic
N
Accessories
Control Panel Products
Legends Plates
For Push Buttons and Visual Indicators
Blank Legend Plates for Inscription
ua
ir
e
Catalog 0600P-7/USA
For PXBB Devices (2 lines of 11 characters maximum)
Please indicate the required text when ordering.
(Allow 3 weeks for delivery)
Legend Plates
for PXBB
Devices (22mm)
Part Number
ZBY2002
Description
Black Background / White Letters
ZBY●●●●
Part Number
Description
Without Text For Customer Engraving
ZBY2101
Black / Red Background (White Letters)
ZBY4101
Yellow / White Background (Black Letters)
With Text For Push Buttons
ZBY2303
ZBY2304
ZBY2305
ZBY2306
ZBY2307
ZBY2308
ZBY2309
ZBY2310
ZBY2311
ZBY2312
ZBY2313
ZBY2314
ZBY2321
ZBY2323
Stop
Forward
Reverse
Up
Down
Right
Left
On
Off
Open
Close
Inch
Reset
Power On
pn
e
ZBY2326
Start
ZBY2327
Slow
ZBY2328
Fast
ZBY2330
Emergency Stop
ZBY2334
Run
With Text For 2-Position Selectors
ZBY2367
Off
On
Off
Auto
With Text For 3-Position Selectors
ZBY2387
Hand
14
Pneumatic
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatic
Control Panel Products
Mounting Accessories
Catalog 0600P-7/USA
Accessories
ua
ir
e
DIN Rail – AM1DE200
This DIN mounting rail can be
mounted to grids or other surfaces
and allow snap in mounting of
pneumatic and electrical
components. DIN rails are sold
in 6 ft. increments.
15mm
138mm
1.5mm
Mounting Track
Spacer
The mounting track spacer is
Height
Model Number
Box Qty.
1/2"
AZ1CA04
10
3/4"
AZ1CA029123
10
2"
AZ1CA3167542
5
installed under the DIN rail and
allows the rail to be elevated from
the grid or mounting surface.
Clip Nuts – AF1EA51
Clip nuts for universal mounting on
grids. 10-24 threads.
Tubing Clamps –
AK2LA34
pn
e
Tubing clamps snap onto mounting
grid and hold ten 5/32" diameter
tubes. Use with 1/2" mounting
track spacer.
Terminal Block –
HS3PK4
Allows for four straight through
pneumatic passages. Mounts to
35mm DIN rail. Complete with
5/32" O.D. instant tube connectors.
15
Pneumatic
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatic
N
Control Panel Products
Catalog 0600P-7/USA
pn
e
ua
ir
e
Notes
16
Pneumatic
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatic