ELABOAccessories
Accessories
When furnishing office and laboratory work stations, there are various accessories required, like tools, measuring instruments, connecting leads etc., but also the right illumination is very important for the user.
Normally a lot of sockets outlets are required in a laboratory.
The user determines the most favourable
assembly place at the work station.
E 2
Socket Strips
The required number of outlets varies, depending on request and mode of operation.
Illustration left: Made from impact resistant synthetic material, connection lead alternatively 1.5 m or 5 m with
Schuko plug. By using the fixing plates, the socket strips can easily be fitted at any required location.
Illustration right: Socket outlet body made from aluminium with integrated cable windind device and eye for a safe
fixing.
Catalogue No.
2GA27 81-2BZ01
Catalogue No.
2GA27 81-2BZ02
Catalogue No.
2GA27 81-2CZ01
with switch; 1.5 m lead, colour white
W = 290 mm, D = 50 mm, H = 40 mm
Socket strip 6 x SCHUKO
Catalogue No.
2GA27 81-2CZ02
with switch; 5 m lead, colour white
W = 290 mm, D = 50 mm, H = 40 mm
Socket strip 6 x SCHUKO
Catalogue No.
2GA27 81-2DZ01
1.5 m lead, colour white
W = 330 mm, D = 50 mm, H = 42 mm
Socket strip 6 x SCHUKO
Socket strip 6 x SCHUKO
Catalogue No.
2GA27 81-2FZ02
with switch; 5 m lead, colour silver/black
W = 450 mm, D = 70 mm, H = 40 mm
with fastening holes; 5 m lead, colour white
W = 180 mm, D = 50 mm, H = 42 mm
Socket strip 6 x SCHUKO
Catalogue No.
2GA27 81-2FZ01
with switch; 1.5 m lead, colour silver/black
W = 450 mm, D = 70 mm, H = 40 mm
with fastening holes; 1.5 m lead, colour white
W = 180 mm, D = 50 mm, H = 42 mm
Socket strip 3 x SCHUKO
Socket strip 6 x SCHUKO
Socket strip 6 x SCHUKO
with full protection
Catalogue No.
2GA27 81-2GZ01
with overvoltage protection, frequency and line filters
connection max. 3600 W ( 16 A, 230 V ),
nominal leakage current 5 kA,
visual failure indication of the overvoltage protection,
double overheating protection,
illuminated switch and 1.5 m connecting lead
colour silver/black
W = 600 mm, D = 70 mm, H = 50 mm
Socket strip 6 x SCHUKO
with full protection
Catalogue No.
2GA27 81-2GZ02
design as type 81-2GZ01 but with 5 m long connecting lead.
W = 600 mm, D = 70 mm, H = 50 mm
Catalogue No.
2GA27 81-2DZ02
ELABOAccessories
Socket strip 3 x SCHUKO
5 m lead, colour white
W = 330 mm, D = 50 mm, H = 42 mm
1 set mounting plates
Catalogue No.
2GA27 81-2E
for socket strips 81-2C/D incl. fixing material
E 3
ELABOAccessories
Socket Strips, Cable Outlet, Sleeves
Socket strip 18 x SCHUKO
Catalogue No.
2GA27 81-2S
with switch, anodized aluminium housing, with fixing plates
W = 1795 mm, D = 50 mm, H = 40 mm
Socket strip 7 x SCHUKO
Catalogue No.
2GA27 81-2T
with switch, anodized aluminium housing, with fixing plates
W = 482 mm, D = 50 mm, H = 40 mm
Socket strip 6 x SCHUKO
Catalogue No.
2GA27 81-2U
with ELCB and automatic circuit breaker, I∆N < 30 mA, 230 V/ 16 A.
anodized aluminium housing, with fixing plates
W = 482 mm, D = 50 mm, H = 40 mm
2 SCHUKO socket outlets
with hinged lid
Catalogue No.
2GA27 81-2JZ
Sleeve
Catalogue No.
2GA27 81-2LZ
Sleeve with flange, suitable for mounting in bench racks, for inserting
luminaires, paper holders, etc.
Mounting left, right or middle.
Cable outlet
Catalogue No.
2GA27 81-2KZ
Cable outlet for mounting in table tops, shelf structures, and mounting plates. Mounting left, right or middle.
Catalogue No.
2GA27 81-2V
Set fixing material for mounting socket strips into 19"-racks.
Suitable for Type 81-2T and 81-2U.
2 fixing brackets
2 SCHUKO socket outlets
with hinged lid (for bridge type bench racks)
Sleeve
for mounting in bridge type bench racks only
Z = Please state required mounting place.
E 4
Catalogue No.
2GA27 81-2PZ
Catalogue No.
2GA27 81-2WZ
Sleeve, suitable for mounting in bridge type bench racks, tilted top
plate, for inserting luminaires, paper holders, etc.
Mounting left, right or middle.
Bench Mats
Bench mats protect the work surface from being damaged.
Rubber mat
Catalogue No.
2GA27 81-6B
Rubber mat with honeycomp pattern.
W = 460 mm, D = 390 mm, thickness 6 mm
All-rubber mat
Catalogue No.
2GA27 81-6C
All-rubber lattice mat for repair and production.
W = 625 mm, D = 375 mm, thickness 20 mm
Ω
Rubber profile mat
Catalogue No.
2GA27 81-6DZ01
Rubber profile mat, for covering workbenches, material thickness
3 mm, Width 1000 mm, max. length 10 m.
(Please state required lenght!)
Insulation mat
cutting 10 m long
Cutting for drawer under-bench cabinets
W = 330 m, D = 490 mm
Catalogue No.
2GA27 81-6DZ02
Rubber mat for putting into drawers of ELABO under-bench cabinets,
see Catalog, Product Group B, Types 02-4.
Insulation mat
cutting 7.5 m long
Catalogue No.
2GA2781-6EZ02
Insulation mat
cutting 5 m long
Catalogue No.
2GA2781-6EZ03
Cutting for drawer under-bench cabinets
W = 330 m, D = 4690 mm
Insulation mat
cutting 2.5 m long
Catalogue No.
2GA2781-6EZ04
Rubber mat for putting into drawers of ELABO under-bench cabinets,
see Catalog, Product Group B, Types 02-5.
E 5
ELABOAccessories
Catalogue No.
2GA27 81-6DZ03
Catalogue No.
2GA2781-6EZ01
Insulation mat with high electric strength and clearly defined dielectric values. Tested according to VDE 0303, 50000 V.
W = 1.5 m, Colour grey.
ELABOAccessories
Bench Luminaires
Luminaires are delivered inclusive a fixing device.
Visibility at workplaces is very important. The direct illumination of desks should reach at least 700 lux.
Recommended light level is appr. between 500 lux for PC-workstations and 1500 lux for watchmakers workstations.
All listed luminaires have a 13 mm plug-in cone. With the available assembly adapters ( see illustration Page E 7 ), the luminaires can be fitted at any desired place.
Foto
85.1A
Foto
Langfeld-Leuchte-85-1B
Articulated luminaire
Catalogue No.
2GA27 85-1A
Articulated bench luminaire with 190 mm Ø reflector, for lamps up to
60 W. With 1.80 m connecting lead and SCHUKO plug. Colour grey.
Cold-light articulated luminaire
Cold-light magnifying luminaire
Office-workstation luminaire
Catalogue No.
2GA27 85-1C
Cold-light magnifying luminaire with 220 mm Ø, 3 dioptres magnifi-cation, with 22 W annular fluorescent lamp. Diameter of magnifier
130 mm. With 2 m connecting lead and SCHUKO plug. Colour grey.
E 6
Catalogue No.
2GA27 85-1B
Cold-light articulated luminaire with 480 mm x 100 mm reflector for
two 15 W fluorescent lamps, 26 mm Ø. With 2 m connecting lead and
SCHUKO plug. Colour grey.
Catalogue No.
2GA27 85-1D
The dazzle-free office-work station luminaire fulfills all demands of a
modern and ergonomic designed office Lamp: 18 W TC-D/E.
With 2 m connecting lead and SCHUKO plug, colour grey (without
foot).
Bench Luminaires
The luminaires, shown on this page are equipped with a screw-on flange 60 x 60 mm. Please select the required mounting
adapters (shown on Page E 8) for fitting luminaires to workstation.
Cold-light multi purpose luminaire
Catalogue No.
2GA27 85-2A
Cold-light multipurpose articulated luminaire with fluorescent lamps.
Fluorescent lamps:two of 15 W each
Reflector:
475 mm x 105 mm
Connecting lead: 1.5 m
Colour
grey
With screw-on flange 60 x 60 mm
Cold-light luminaire
with soldering smoke absorber
Magnifier
Replacement filter (without illustration)
fits luminaire 85-2D
Catalogue No.
2GA27 85-2E
Metal C-clamp
clamping width 70 mm
Catalogue No.
2GA2785-1XZ01
Wall fixing device
Catalogue No.
2GA2785-1XZ02
Foot
(Illustration see left page, type 85-1D)
Catalogue No.
2GA2785-1XZ03
Sleeve 13 mm, loose
Catalogue No.
2GA2785-1XZ04
Catalogue No.
2GA27 85-2B
Large magnifier which fits multi purpose luminaire 85-2A.
Dioptres:
2.5
Area:
180 ... 70 mm
Catalogue No.
2GA27 85-2D
Cold-light articulated luminaire with soldering smoke absorber. Smoke
will be absorbed by noiseless exhauster with renewable special filter.
Tube:
22 W LS-annular fluorescent lamp
Reflector:
Ø 245 mm
Colour:
grey/yellow
With screw-on flange 60 x 60 mm
E 7
ELABOAccessories
Fixing devices for luminaires with 13 mm plug-in cone
Types 85-1A to 85-1D (see page E 6).
ELABOAccessories
Luminaires
Halogen spotlight
Catalogue No.
2GA27 85-2G
The concentrated halogen light and the individually adjustable triple
hinged arm give illumination over a wide area.
Lower arm:
280 mm with integrated transformer
Turning angle:
360° with 13 mm push-in system
Upper arm:
425 mm
Lamp power:
20 W
Mains supply:
230 V/ 50 Hz
Colour:
grey
Screw-on foot 60 x 60 mm..
Clamp for screw-on flange
Clamp width 134 mm
Catalogue No.
2GA27 85-2XZ01
Screw-on bracket 60/60 to 13 mm
fits sleeve 81-2L
Catalogue No.
2GA27 85-2XZ02
Foot for screw-on flange
60 x 60 mm
Catalogue No.
2GA27 85-2XZ03
For more luminaires see ELABOInForm Catalogue.
E 8
Luminaires, Copy Holder
For the listed "Desk Tidies" there are different fixing device available. The universal clamp is part of the scope of delivery.
Foto
Aufhängevorrichtung
für Kabel
Foto
Meßleitungshalter
Wandmontage
Office desk luminaire
18 Watt inclusive lamp
Catalogue No.
2GA27 85-3A
Elegant desk lamp, adjustable for height and angle for optimum
desktop illumination. The 18 W energy saving lamp with asymmetric
reflector provides full desktop illumination without glare and shadow.
Catalogue No.
2GA27 85-3B
Swivelling telephone stand
Telephone stand for all types of telephones. Keeps the the desk tidy
and the telephone within easy reach with a patented 3-point grip. The
variable tray is suitable for telephones of up to 3 kg and can be fitted
in a narrow or broad form. Fitted by desk clamp. Colour grey.
Tray size: 250 x 175 mm
Bild Scriptli
93,5 x 85mm
Foto
Kombi-Meßleitungshalter
Wandmontage
Copy holder DIN A4/3
Catalogue No.
2GA27 85-2C
Copyholder, fully adjustable in any position. Safe positioning of the
copy in eye-level, quick adjustment and interlocking with one hand.
Delivery including extention plate (size A3) and ruler.
Colour grey.
komplett
leer
View Master 24 DIN A4
Catalogue No.
2GA27 85-3D
The view master is fully adjustable in any desired position. It is suitable to keep up to 24 DIN A4 pages for easy reading.
Including 12 holding devices for paper sheets.
E 9
ELABOAccessories
Foto
KombiMeßleitungshalter
fahrbar
ELABOAccessories
Tray Set, Monitor-Swivel Arm
Rotating tray set
triple
Catalogue No.
2GA27 85-3E
Rotating tray set with three elegantly styled trays for lengthways or
crossways fitting.
Paper labels for orderly marking are included.
Colour grey, incl. universal clamp.
Monitor swivel-arm
adjustable
Catalogue No.
2GA27 85-3F
Monitor swivel-arm, suitable for monitors up to about 20 kg weight.
The support surface is turnable and inclinable. With holding device for
keyboards. Dimensions of surface 320 mm x 270 mm.
Colour grey, incl. clamp for table mounting.
Universal clamp*
Clamp width 18...74 mm
Catalogue No.
2GA27 85-3XZ01
Wall fixing device*
Catalogue No.
2GA27 85-3XZ02
Adapter for sleeve 81-2L*
13 mm diameterr
Catalogue No.
2GA27 85-3XZ04
* not suitable for Type 85-3F
E 10
Shelves
Catalogue No.
2GA27 85-4A
Storage board with very good stability made of silvery mat anodized
aluminium. Fitted by means of two clamps to table tops. Height above
table top 150 mm.
W = 1200 mm, D = 250 mm, Total Height = 220 mm
Storage board double
Catalogue No.
2GA27 85-4B
Storage board as described, but two units fitted above each other.
W = 1200 mm, D = 250 mm, H = 350 mm
ELABOAccessories
Storage board
E 11
ELABOAccessories
Vice, Vertical Adjusting Device
Parallel vice
125 mm
Catalogue No.
2GA27 81-7K
Steel-forged parallel vice with surface hardened clamping jaws.
Width 125 mm, Jaw width 125 mm.
Catalogue No.
2GA27 81-7L
Vertically adjusting device for quick and safe height adjustment of
vices. The stepless height adjustment is performed by a gas lift. An
additional turning of the vice by 360 ° is possible.
Recommend for vocational schools and training work stations for
adjusting the optimal working position of parallel-vices.
Vertical adjusting device
for vices
E 12
Vices
Vice with ball joint
Catalogue No.
2GA27 81-7A
Vice with ball joint, can be swivelled in all directions and locked in any
desired position, suitable for screwing onto workbenches.
Vice with ball joint
with vacum base
Catalogue No.
2GA27 81-7F
Vice with ball joint, can be swivelled in all directions and locked in any
desired position, suitable for fixing to workbenches by means of the
vacuum base.
Spannfix-Vario
ELABOAccessories
Catalogue No
2GA27 81-7F
Spannfix-Vario assembly vice with interchangeable screw-on work
mounts. 5-piece set consisting of:
a) Universal clamp mounting ball joint base for screwing onto work
benches with max. table thickness of 80 mm.
b) Crew-on mounting vice with interchangeable jaws clamping
capacity 70 mm, clamping depth 38 mm, jaw width 43 mm,
clamping pressure 150 kp.
c) PC-board holder, clamping capacity adjustable from 25 to 270 mm,
height of location arms 70 mm, correct setting by
adjusting the
centre position, protected against contact voltages, firm
clamping of
the PC-board by built-in resilience in the location
arms.
d) Universal screw-on plate. Slots made for holding, for example,
tuner, lineoutput transformer, small loudspeaker etc.
e) Angular adapter to be used as an additional attachment with every
E 13
ELABOAccessories
Tool Kits
Tool kit (26 items)
Electronics
Catalogue No.
2GA27 81-8C
Tool kit, 26 items, "Electronics" fits into ELABO-underbench cabinets
(from page B 21), consisting of:
1 Polystyrene tray
1 Insulated screwdriver
2.5 x 75 mm
1 Insulated screwdriver
3.0 x 100 mm
1 Insulated screwdriver
4.0 x 100 mm
1 Insulated screwdriver
5.0 x 150 mm
1 Philips hand screwdriver
1
x 80 mm
6 Watchmaker's screwdrivers
1
to 3.5 mm
1 Pincer
3.5 x 145 mm
5 Socket wrenches
4, 5, 6, 7, 8 mm
1 Insulated combination pliers
140 mm
1 Insulated fine mechanics's pliers (flat wide jaws)
125 mm
1 Insulated fine mechanics's pliers (flat round jaws)
125 mm
1 Insulated fine mechanics's pliers (flat pointed jaws)
125 mm
1 Side cutter
125 mm
1 Side cutter (for difficult cuts)
125 mm
6 Warding files with handle comprising:
flat, half-round, three-square, square, round and
taper files.
100 mm
1 1m long folding ruler
E 14
Tool kit (35 items)
Universal
Catalogue No.
2GA27 81-8F
Tool kit "Universal" fits into ELABO-underbench cabinets
(from page B 21), consisting of:
1 Polystyrene tray
1 Screwdriver
3.0 x 75 mm
1 Screwdriver
4.0 x 100 mm
1 Screwdriver
6.0 x 25 mm
1 Screwdriver
6.0 x 125 mm
1 Screwdriver
8.0 x 150 mm
1 Philips hand screwdriver
1
x 80 mm
1 Philips hand screwdriver
2
x 25 mm
1 Philips hand screwdriver
2
x 100 mm
1 Phase finder
3.0 x 65 mm
1 Combination pliers,
chrom. isol.
140 mm
1 Water pump pliers,
chrom. isol.
125 mm
1 Long nose pliers form 2
chrom. PVC
140 mm
1 Long nose pliers form 3
chrom. PVC
140 mm
1 Adjusting pliers form 1
chrom. PVC
135 mm
Millieu-Foto
1 Duch bill pliers
9 x 1.5 mm chrom. PVC
160 mm
1 Pair of pincers,
150 mm
aus6"Teil B nickel isol.
1 Pair of pincers 5 ¾"
nickel isol.
145 mm
Mechanik
1 Six-part socket wrench set (chrom. vanadium),
consisting (Sechseck-Detail)
of: 1 plastic spring-loaded handle
and 5 socket wrenches 4 / 5.5 / 6 / 7 / 8 mm
1 Side cutter
chrom. isol.
125 mm
6 Warding files with handle comprising:
flat, half-round, three-square, square, round and taper files.
1 Hammer 200 g
1 Mini hacksaw
1 Tinner's snip
1 Cable skinner
1 1m long folding ruler
Tool Kit
Toolkit
Mecanics
ELABOAccessories
Bestellnummer
2GA27 81-8D
Tool kit "Mechanics" fits into ELABO-underbench cabinets (from page
B 21), consisting of:
2 Polystyrene trays
1 Pincer
3.5 x 145 mm
1 Centre punch
110 mm
1 Hammer 200 g
1 Plastic tip hammer K 25
1 Sandrik-hacksaw with blade
1 Flat file with handle H2
150 mm
1 Half-round file with handle H2
150 mm
1 Round file with handle H2
150 mm
6 Warding files with handle comprising:
flat, half-round, three-square, square, round and taper files
1 File brush
1 Flat scraper
150 mm
1 Flat chisel
125 mm
1 Cape chisel
125 mm
1 Three-square scraper
100 mm
1 Gold sheet cutter
170 mm
4 Drift punches1 / 2 / 3 / 4 mm
Ø 120 mm
1 Bent scriber
230 mm
1 Pocket slide caliber
150 mm
1 Steel ruler
200 mm
1 1m long folding ruler
1 Wing divider
150 mm
1 Try-square
70 x 100 mm
1 Thin stell square
70 x 100 mm
E 15
ELABOAccessories
Tool Cases for Electrician / Electronics Technicians
Tool case
with 18 tools for electricians
Tool case complete with 18 tools:
1 Telephone pliers
1 Combination pliers
1 Side cutter
1 Stripping pliers
1 Water pump pliers
1 Engineer's screwdriver
1 Engineer's screwdriver
1 Engineer's screwdriver
1 Philips screwdriver
1 Philips screwdriver
1 Electrician's screwdriver
1 Electrician's screwdriver
1 Electrician's screwdriver
1 VDE-voltage tester
1 Cable knife
1 Universal scissors
1 Mini hacksaw
1 Folding ruler 2 m
Dimensions case:
W = 365 mm, D = 70 mm, H = 240 mm
E 16
Catalogue No.
2GA27 81-8K
160 mm
185 mm
160 mm
150 mm
245 mm
5.5 x 100 mm
6.5 x 125 mm
8.0 x 150 mm
Size 1
Size 2
3.0 x 75 mm
4.0 x 125 mm
5.0 x 150 mm
3.0 x 140 mm
190 mm
Tool case
with 18 tools for electronics technicians
Tool case complete with 18 tools:
1 Telephone pliers
1 Electronic-Side cutter
1 Wire scraper, for wires of 0.6 mm ø
1 Side cutter
1 Taper pliers, straight
1 Flat-nose pliers, straight
1 Steel pincer
1 Plastic pincer
1 Philips screwdriver
1 Screwdriver
1 Screwdriver
1 Retaining screwdriver
1 VDE-voltage tester
1 Repair mirror
1 Magnetic holder
1 Claw-type gripper
1 Telephone scissors
1 Contact file
Dimensions case:
W = 365 mm, D = 70 mm, H = 240 mm
Catalogue No.
2GA27 81-8L
160 mm
130 mm
130 mm
160 mm
135 mm
155 mm
115 mm
Size 1
3.0 x 75 mm
4.0 x 100 mm
4.0 x 125 mm
3.0 x 140 mm
270 mm
235 mm
165 mm
130 mm
150 mm
Tool Holders
Tool holder
with 19 clips
Tool holder
with 6 clips
Catalogue No.
2GA27 81-8Q
ELABOAccessories
Catalogue No.
2GA27 81-8P
The tool holder allows a ready to hand and quick storage of various
tools. If required, clips can be removed in order to store larger tools.
For more applications see ELABOInForm Catalogue.
E 17
ELABOAccessories
Soldering and Desoldering Stations
The by ELABO offered solder and desoldering stations made by ERSA and Weller offer soldering solutions to most industrial
applications.
Millieu-Foto
Löten
allgemein
Soldering station
Catalogue No.
2GA27 82-1H
Electronic temperature controlled, antistatic soldering station with analog temperature display, Manufacturer ERSA ANALOG 60 A with iron
holder. The station serves for all industrial soldering applications.
ERSADUR-soldering tips offer a wide variety of applications for different soldering demands.
Specification:
Voltage:
24 V AC
Power:
75 W / 280°C
Heating time: appro. 60 s (up to 280°C)
Soldering station digital
Catalogue No.
2GA27 82-1J
Electronic temperature controlled, antistatic soldering station with
digital temperature display, Manufacturer ERSA DIGITAL 60 A with
iron holder. The station serves for all industrial soldering applications.
A PTC heating element delivers a start heating temperature of 130 W
for a specific heat quantity to the soldering point.
Specification:
Voltage:
24 V AC
Power:
70 W / 280°C
Heating time: appr. 12 s (up to 280°C)
E 18
Soldering and desoldering station
Catalogue No.
2GA27 82-1K
Electronic soldering and desoldering station Ersa ELS 8000, is especially designed for industrial use, laboratories and repair works.
The temperature can be adjusted between 150°C ... 400°C.
The built-in vacuum pump makes the station indepentent of air pressure supply.
The scope of supply includes the soldering and desoldering irons as
well as the iron holders. The soldering station comes without digital
temperature display.
Soldering and Desoldering Stations
Soldering and desoldering stations are also available as modules for the various bench rack systems according to Product
Gruop C.
Foto
Spannfix-Vario
5teilig
Soldering station analog
Catalogue No.
2GA27 82-1P
Analog temperature controlled soldering station, Weller WS 50 with
iron holder. Steplessly temperature control by potentiometer between
150°C to 400°C. Temperature control can be locked by a key switch. All
Temtronic-tools up to 50 W can be connected.
Specification:
Power:
50 W / 400°C
Inaccuracy: ± 2% f.s.
Soldering station digital
Catalogue No.
2GA27 82-1Q
Digital temperature controlled soldering station, Weller WSD 50 with
iron holder. Steplessly temperature control by push buttons between
150°C to 450°C. All Temtronic-tools up to 50 W can be connected.
3digit digital display for NOMINAL and SET VALUE.
Specification:
Power:
50 W / 400°C
Inaccuracy: ± 2% f.s.
SMD-Maintenance workstation
ELABOAccessories
Catalogue No.
2GA27 82-1L
Electronic soldering and desoldering station ERSA REWORK 80.
The allround-station is suitable for repair soldering of SMD-subassemblies. The supply unit RW 803 contains the electronic supply of the
two control units and the powerful air supply for the hot air soldering
and desoldering irons (temperature range 280°C) as well as the vacuum pump for the vacuum-pipette. The temperature and the intensity of
the stream of air of the heating air piston are adjustable. The station can
be used for both single as well as multi-pole com-ponents.
E 19
ELABOAccessories
Component Storage Compartments
Component storage compartment for storage of small parts near workstations. Housing in sheet steel, colour light grey. Drawers made from transparent, unbreakable polystyrene. Drawers are equipped with labels.
Dimensions: W = 300 mm, D = 160 mm, H = 540 mm
Component storage compartment
48 drawers
Catalogue No.
2GA27 81-9F
Component storage compartment for storage of small parts near workstations. The compartments can be fitted to the wall or two of them can
be put on the revolving stand 81-9H.
Dimensions W = 300 mm, D = 160 mm, H = 540 mm
Outer dimensions of drawers: W = 69 mm, D = 175 mm, H = 37 mm
Component storage compartment
24 drawers
Catalogue No.
2GA27 81-9G
Component storage compartment for storage of small parts near workstations. The compartments can be fitted to the wall or two of them can
be put on the revolving stand 81-9H.
Dimension of housing: W = 300 mm, D = 160 mm, H = 540 mm
Dimensions of drawers: W = 92 mm, D = 175 mm, H = 59 mm
Revoling stand
Catalogue No.
2GA27 81-9H
Revolving stand for two component storage compartments.
E 20
Revolving Component Storage Compartment
The revolving component storage compartment is the ideal Storage facility for design, repair and service in the electronic
industry.
A selected assortment of components is always placed in easy reach.
Sizes of drawers
Compartments
Outer dim. in mm
Width x Depth x Height
55
x 175 x 37
2
69
x
175
x
96
138
x 175 x 37
2
92
x 175 x 59
2
277
x 175 x 59
2
Total number of
Drawers
120
37
2
48
48
16
Revolving storage compartment
ELABOAccessories
Catalogue No.
2GA27 81-9K
Housing made of sheet steel, grey powder coated. Equipped with 12
storage compartments according to above mentioned table. Two compartments are fitted with drawers of equal size.
There are 352 drawers in six different sizes available.
Total dimensions: W = 465 mm, D = 465 mm, H = 1700 mm
Drawer partitions and other compartment variations are available on
request.
E 21
ELABOAccessories
Communication System
The heart of this flexible communication system is the aluminium track. It can be mounted on any wall in any room for hanging all presentation aids in seconds. Movable, flexible and suitable for a variety of options. Transforms any room into an ideal
presentation area.
Execution: Round track profile made from natural, anodised aluminium with plasic lip in lower section for holding individual
sheets firmly, including connectors, clamp and decorative strip in light grey.
Top-aluminium track 3 m
Catalogue No.
2GA27 83-8A
Round track profile made from natural, anodised aluminium with plastic lip in lower section for holding individual sheets firmly, including
connectors, clamp and decorative strip in light grey.
Top-aluminium corner connector
(without illustration)
Catalogue No.
2GA27 83-8B
Top-Projection screen
Super Reflex
Top-aluminium end piece, left
(without illustration)
Catalogue No.
2GA27 83-8C
Top-aluminium end piece, right
(without illustration)
Catalogue No.
2GA27 83-8D
Top-super reflex projection screen.
Sturdy projection surface, adjustable for height and angles, surface,
excellent reflection for extra sharp images, not for marker use.
Colour:
Screen brilliant white Aluminium frame light grey
Dimensions: W=1500mm, H=1500mm
E 22
Catalogue No.
2GA27 83-8E
Communication System
Catalogue No.
2GA27 83-8H
Top-whiteboard, magnetic, with enamelled surface, adjustable in
height, for hanging vertically or horizontally on rails or for direct wallmounting.
Colour:
Board surface white, enamelled,
aluminium frame light grey
Dimensions:
W = 1200 mm, H = 1000 mm
Top-Flip-Chart
Top-whiteboard
(without illustration)
Top-Flip-Chart Block (without illustration)
20 sheets squared
Top-whiteboard
Catalogue No.
2GA27 83-8J
Catalogue No.
2GA27 83-8Q
Top-flip-chart, magnetic surface for use with markers, adjustable for
height and angles, pen tray, paper clamp. Tearing bar can also be used
as clamping bar, adjustable pad clamp.
Colours:
Flip-chart white enamelled, aluminium frame light grey
Dimensions: W = 800 mm, H = 1100 mm
Catalogue No.
2GA27 83-8R
Top-whiteboard as described above but
Dimensions:
W = 1500 mm, H = 1000 mm
Top-Pen tray
(without illustration)
Catalogue No.
2GA27 83-8L
Top-pen tray for whiteboard with a width of 1200 mm.
Top-Pen tray
(without illustration)
Top-shelving unit
Catalogue No.
2GA27 83-8P
Top-shelving unit for TV-video-projektors with two height adjustable
shelves with round edges.
Colour:
shelves light grey, aluminium frame light grey
Dimensions: W = 840 mm, D = 460 mm
E 23
ELABOAccessories
Catalogue No.
2GA27 83-8M
Top-pen tray for whiteboard with a width of 1500 mm.
ELABOAccessories
Communication System
Folding-sliding board
movable
Catalogue No.
2GA27 83-8U
Folding-sliding board, movable. Board material steel-enamel, magnetic,
white gloss finish for board markers.
Centre area:
W = 1500 mm x H = 1000 mm
Wing:
W = 750 mm x H = 1000 mm
1 maintenance-free spring-action mechanism for height adjustment
without counterweight, therefore extremely easy to move.
Height adjustment : 1700 to 2300 mm
2 wings with dust catching strips and corner protection
1 brown stand with large castors, two of which are lockable
1 trim, colour hemp-beige
1 alminium chalk rail with end covers
1 sponge / chalk tray
Folding-sliding board (without illustration)
free-standing
Catalogue No.
2GA27 83-8T
Free-standing folding-sliding board made of magnetic steel-enamel
like type 81-8U.
Other technical data:
Spring-action mechanism; Height adjustment: 1650 mm to 2200 mm,
Stand without castors
E 24
Board drawing set
7parts
Catalogue No.
2GA27 83-8V
Board drawing instruments in white colour, set consisting of
1 instrument board, white plastic
1 set square 60°, length 50 cm,
1 set square 45°, length 50 cm,
1 protactor 180°
1 compass with protactor,
1 pointer, length 100 cm,
1 ruler, length 100 cm,
Felt-tip pen
in four assorted colours
Catalogue No.
2GA2783-8XZ01
Magnet
10 pieces, assorted in different colours
Catalogue No.
2GA2783-8XZ02
Notice board needles
100 pieces, assorted in different colours
Catalogue No.
2GA2783-8XZ03
Board cleaner
Catalogue No.
2GA2783-8XZ04
Blotting paper
for board cleaner
Catalogue No.
2GA2783-8XZ05
ELABOAccessories
Communication System
E 25
ELABOAccessories
Overhead Projectors
Foto
Spannfix-Vario
5teilig
Overhead projector,
portable
Catalogue No.
2GA27 81-9N
Portable overhead projector, material conforms to the latest international safety regulations. Working surface 285 mm x 285 mm.
Focal legth f = 260 mm to 300 mm.
1 vari-focal lens with three lenses, metal mounted and heat-proof,
gives steady, sharp projection in the distance range from
1 to 2.8 meters.
1 heat hardened, scratch proof Fresnel lens which you can write on
1 electronic power supply unit
1 low voltage halogen lamp 24 V / 250 W
1 socket outlet with protection
1 quick change lamp with signal light, one turn and the second lamp
is lit
1 Kick-Off-Switch; by means of integrated safety switch the lamp
lights up only after the mirror has be turned up
1 silent ventilation system allows non stop operation
Colour: greyish brown
Dimensions: W = 340 mm, D = 400 mm, H = 100 mm
E 26
Overhead projektor
Catalogue No.
2GA27 81-9L
Overhead projector, effective area 285 mm x 285 mm. All operation
from above. Projector fulfills all relevant safety regulations.
1 vari-focal lense, f = 275 to 320 mm
1 halogen lamp 24 V / 250 W
1 integrated spare lamp
1 optical control for changing of lamp
1 additional socket outlet
1 safety cord (5 m)
Dimensions: W = 370 mm, D = 370 mm,
H = 270 mm up to work area
H = 690 mm up to top of focus pole
Trolley for Overhead Projector, Video-Projektor
XGA-Projector
Trolley
for Overhead Projector 81-9L
Catalogue No.
2GA27 81-9PZ01
Catalogue No.
2GA27 81-9S
XGA-Projector, AstroBeam X110
Polysilicon TFT LCDs with micro lense system
Lamp:
120 W UHP lamp
Optical Power:
1100 ANSI lumen
Objective:
21.5-28 manuel zoom
Resolution
1024 x 768
Horizontal frequency: 15 - 100 kHz
Vertical frequency:
43,5…130 kHz
Computer:
640 x 480 (resized)
800 x 600 (resized)
1024 x 768
1280 x 1024 (resized)
Dimensions:
W = 215 mm, D = 285 mm, H = 95 mm
Trolley for overhead projector 81-9L,
with cutout 410 x 390 mm.
1 sturdy steel frame, grey powder coated
Height: 750 to 1200 mm, steplessly adjustable
1 working plate, colour white 730 x 590 mm
Without side plate, the overhead projector is also not part of the scope
of delivery.
Trolley
Catalogue No.
2GA27 81-9PZ02
Trolley for overhead projector design as Type 81-9PZ01, but suitable
for projectors with cassettes for foils, cutout 430 mm x 540 mm.
Side plate
for trolley
Catalogue No.
2GA27 81-9R
ELABOAccessories
Side plate for a.m. trolleys.
Plate and framework white.
Dimensions: W = 265 mm, D = 590 mm
For more trolleys see ELABOInForm Catalogue.
E 27
ELABOAccessories
Analog-Multimeter
Analog-Multimeter
Catalogue No.
2GA27 82-2B
Handheld analog multimeter MA 2H, fulfills already professional
tasks. It is suitable for general use in electrical engineering and electronics. All ranges are selected by one turning switch.
The instrument is protected against mechanical abuse.
Specification:
Accuracy:
Class 2.5 AC/DC
Voltage:
DC:
Current:
0 ... 0.15 V, 0 ... 0.5 V
0 ... 1.5 V / 5 / 15 / 50 / 150 / 500 / 1000 V
AC: 0 ... 1.5 V / 5 / 15 / 50 / 150 / 500 V
Level:
DC: 0 ... 50 µA
0 ... 1.5 / 15 / 150 mA
0 ... 1.5 / 15 A
AC: 0 ... 1.5 / 15 / 150 mA
0 ... 1.5 / 15 A
- 15 ... + 56 dB (6 ranges)
Resistance:
1 Ω ... 1 MΩ (4 ranges)
Input resistance:
20 kΩ / V DC
4 kΩ / V AC
E 28
Analog-Folding-Multimeter
Catalogue No.
2GA27 82-2E
Analog multimeter METRAport 3E, with advantageous folding tech-nology. It is suitable for general use in electrical engineering and electronics. Due to the integrated amplifier the unit has a very high input
resistance in the voltage ranges and a low voltage drop in the current
ranges.
Specification:
Accuracy:
Class1.5 DC
Voltage:
DC: 0 ... 100 mV / 300 mV
0 ... 1 / 3 / 10 / 30 / 100 / 300 / 1000 V
AC: 0 ... 100 mV / 300 mV
0 ... 1 / 3 / 10 / 30 / 100 / 300 / 1000 V
Current:
DC: 0 ... 10 / 100 µA
0 ... 1 / 10 / 100 mA
0 ... 1 / 10 A
AC: 0 ... 10 / 100 µA
0 ... 1 / 10 / 100 mA
0 ... 1 / 10 A
- 15 ... + 56 dB (6 ranges)
1 Ω ... 20 MΩ
Level:
Resistance:
Digital-Multimeters
Digital-Multimeter
Catalogue No.
Catalogue No.
2GA27 82-3K
2GA27 82-3P
The Digital multimeter Fabr. Dynatek Typ 9010 offers apart from a large The Digital-Multimeter, Fluke Type 79 III is a rugged, reliable meter
with protection against high transient spikes up to 6 kV! The multimeasurement range further functions like Auto power-off, Logic Test,
Duty Cycle etc.
meter is also protected against overvoltages up to 1000 V, even if the
turning knob is set to resistance measurement and the mea-surement
• 3¾digit 17 mm LCD-display
is taken in a current-carrying circuit.
• Maximal Display 3999 or -3999
• Diode Test, Continuity Test,
• Bright high-contrast screen for easier viewing from distances with
• Duty Cycle, Data Hold, Peak Hold
especially large characters and symbols
• Automatic Negative Polarity Display
•
True
rms transducer for accurate measurement of non-sinusoidal
• Frequency Display (autoranging)
signals
• Overload Display
• Overload Protection
Specification:
Function:
Voltage:
Current:
Resistance:
digit
Ranges:
DC: 400 mV ... 1000 V
AC: 400 mV ...
750 V
DC: 400 µA...
20 A
AC: 400 µA ...
20 A
400 Ω ...
400 MΩ
digit
Frequency:
Diode Test:
Duty Cycle:
Inaccuracy:
± 0.5% + 1 digit
± 1.2% + 3 digit
± 2.0% + 3 digit
± 1.0% + 2 digit
± 3.0% + 2 digit
± 1.5% + 4 digit
± 3.5% + 4 digit
± 1.0% + 4
± 2.5% + 7
4 MHz
± 1.0% + 4 digit
test current 1 mA ± 1.0% + 1 digit
level 5 V logic
± 2.0% + 10 d
Specification:
Function:
Ranges::
Inaccuracy:
Voltage:
DC:40 mV ...400.0 mV; 4.000 V; ± 0.3% + 1 Digit
40.00 V; 400.0 V; 1000 V
AC:
40 mV ...400.0 mV;
4.000 V; ±
1.5% + 2 Digits
40.00 V; 400.0 V; 1000 V
Current:
DC:4.000 mA; 40.00 mA; 4.000 A;
± 0.5% + 2
Digits
10A
AC: 4.000 mA; 40.00 mA; 4.000 A;
± 0.5% + 2
Digits
10A
Resistance:
400.0 Ω; 4.000 kΩ; 40.00 kΩ;
± 0.4% + 1
Digit
400.0 kΩ; 4.000 MΩ; 40 MΩ
E 29
ELABOAccessories
Digital-Multimeter
ELABOAccessories
Digital-Multimeters
Bild - spiegelverkehrt !!!
Metrawatt HIT_29s
93,5 x 80 mm
Digital-Bench Multimeter
Catalogue No.
2GA27 82-3Q
The digital multimeter, Fluke Type 45 combines a multitude of test
instruments in one unit. The dual fluorescent display multimeter lets
you measure two signal parameters from a single test connection
- and view both measurements at the same time without changing the
measurement set up.
Digital-Multimeter
• Display 100.000 Digits (each display)
• Selectable reading rates and resolutions
• true rms Voltage and Current Measurements, crest factor max. 3
• dB Measurement (dB) with 21 selectable reference impedances
• Touch Hold, relative and Min./Max. Functions
• Audio Power Measurement (from 2 Ω to 16 Ω )
• Frequency Measurement
• acoustical Continuity Test
• True rms measurement: Measurements of DC, AC and rippled DC.
• Sensor connection with scaling
• Auto Select: Selects the desired function automatically
• Infrared-data transmission
Specification:
Function:
Specification:
Function:
Ranges:
Voltage:
cy
on
Current:
cy
on
Resistance:
digit+ 0.02Ω
digit
Frequency:
Diode test /
E 30
Ranges:
DC: 300 mV ... 1000 V
AC: 300 mV ... 750 V
DC: 30 mA...
10 A
AC: 10mA ...10 A
Inaccuracy:
± 0.02% + 2 digit
depending on frequenand resoluti± 0.05% + 3 digit
± 0.2% + 7 digit
depending on frequenand resoluti-
100 Ω ...
± 0.5% + 8
300 MΩ
± 2.0% + 2
1 kHz ... 1 MHz
± 0.05% + 4 digit
Catalogue No.
2GA27 82-3R
The digital multimeter, Type METRA Hit 28S is with the worldwide
unique resolution of ± 300.000 digits suitable for very accurate maintaining, repair and design jobs.
Due to the integrated mains adapter jack it is useful for stationary
measurements as well as for the supply of sensors.
Voltage:
300 mV ... 1000 V
%
(DC/AC)
Current:
300.00 µA ... 10 A
(DC/AC)
Resistance: 300,000 Ω ... 30 MΩ
Temperature:
Pt100
-200 ... 100 °C
Pt1000
100 ... 850 °C
K (NiCr-Ni) -270 ... + 1372 °C
J (Fe-CuNi) -210 ... + 1200 °C
Capacity:
3.000 nF ... 30 mF
Frequency: 300,000 Hz
... 300 kHz
Level:
-48 ... +63 dB
Inaccuracy ± (% o.rdg.+ D):
= 0.02% o.rdg.
~ 0,2-0,5
0.005 0.rdg. + 5 D
+ 30 D
= 0.05...0.2% rdg. ~ 0.5% + 30 D
0.05 ... 1% o.rdg. + 5 D
0.5 K + 3 D / 0.2 % o.rdg. + 3 D
0.7 % o.rdg. + 3 D
0.8 % o.rdg. + 3 D
1% (...5%) + 1 D
0.05% + 1 D
Parameter: 600 Ω / 1 mW
VDE-Safety Tester
Catalogue No.
2GA27 82-4Q
Safety tester Gossen ProFiTest 0100S for measurements according to
DIN VDE 0100 Part 610 and respective international test regulations
(e.g. IEC 64-8, HD 346-6-61.S1).
According to international regulations it is necessary to check for all
electrical installations the effectiveness of the protective measures.
By using the ProFiTest 0100S all safety tests and measurements, mentioned in the respective regulations, are possible.
•
•
•
•
•
•
•
•
•
•
Insulation resistance measurement to DIN VDE 0413 Part 1
Loop resistance measurement to DIN VDE 0413 Part 3
Low resistance measurement to DIN VDE 0413 Part 4
Leakage current measurement to DIN VDE 0413 Part 6
Earth resistance measurement to DIN VDE 0413 Part 7
Three phase sequence measurement to DIN VDE 0413 Part 9
Mains impedance
Location insulation resistance
Earth leakage resistance
Voltage, Frequency, Leakage current
Specification:
ELCB, Leakage current:
Loop resistance (... 550 V):
Sort circuit current:
Earth resistance:
Location insulation resistance:
Earth voltage:
Insulation resistance:
Insulation/Earth leakage:
Voltage measurement:
Low resistance measurement:
Frequency:
10 / 30 / 100 / 300 / 500mA
0 ...
10
Ω
6.35 A
...
50
0.15 Ω
...
10
0 ...
1
MΩ
0
...
253
0 ...
300
MΩ
50 kΩ
...
100
0 ... 253 / 500 / 850 V
0
...
100
15
...
420
kA
kΩ
V
MΩ
Safety tester 0100
Catalogue No.
2GA27 82-4R
Safety tester Chauvin Arnoux for measurements according to
DIN VDE 0100 ; ÖVE EN-1; NIN / NIV; IEE 16'th Edition etc.
The unit comprises all important measurement functions and has a
large definite 3 1/2 digit display with illumination.
• Most simple operation-fully automatic measurements
• Loop resistance measurement for (TN) mains supply with 30 mA
leakage current without release possible!
• Release current, contact voltage, release time, loop resistance and
short circuit within a leakage current measurement!
• Selective earth resistance measurement with clamp-on ammeter
• Memory and interface-direct protocol on A4!
Specification:
Voltage measurement AC/DC:
Frequency measurement:
Leakage current:
Loop resistance:
Short circuit measurement range:
Earth resistance:
Earth voltage:
Insulation resistance:
Insulation measurement DC:
Loop impedance:
Memory:
0 ...
500
V
15.3
...
450
Hz
6 ...
1000
mA
0 ...
0.15
Ω
6.35
...
10
kA
0.15 Ω
...
9.99
kΩ
0
...
300
V
1 kΩ
...
1
MΩ
500 / 250 / 100
V
0.08
...
199
Ω
Built-in memory for measurements with up to 800 groups of
measurements.
Protocol printout on DIN A4
Centronics printer directly
possible.
Ω
Hz
E 31
ELABOAccessories
Safety tester 0100
PROFiTEST 0100S II
ELABOAccessories
Safety Testers
Safety tester 0701/0702
Catalogue No.
2GA27 82-4V
Safety tester, Metratester 5, Fabr. ABB Metrawatt M 5013 for checking
repaired or modified electrical equipment according to
VDE 0701 and 0702.
• Large digitale LC-display, limit value exceedings are monitored
audible and partly accoustical
• Testing of mains supply manually and indicator lamp
• Difference current measurement
• Infrared interface which allows a comfortable and price worthy
taking down of the measurements by transmitting the measured
values to a PC, Notebook or Organizer.
Specification:
PE conductor resistance:
0
...
19.99
Insulation resistance:
0
...
19.99
Leakage current:
0
...
219.99
Check voltage/ no voltage:
0
...
1.999
Difference current meas.:
0.01
...
19.99
Mains supply:
207
...
253
Unit can be used for measuring AC voltage and current.
Safety tester 0701/0702
SECUTEST
Catalogue No.
2GA27 82-4U
Safety tester (SECUTEST), ABB Metrawatt for checking repaired or
modified electrical equipment according to VDE 0701 and 0702.
The instrument recognizes the safety class of the item to be tested
and carries out the complete measuring automatically.
Multimeter functions inclusive measurements of temperature complete the applications for the user.
Information for the user and parameter setting, measurement and
test results, connection wirings, fault monitorings are represented in
plaintext on a large dot matrix-LCD. Several national languages are
available.
• Functions extendable by a PSI-module
Ω
MΩ
mA
mA
mA
V
•
•
•
•
•
(Printer/ Memory/ Keyboard)
Connection for barcode reader
Serial interface as standard feature
All measurement readings on plaintext display
Menu driven
Printout of protocols on-site
Specification:
PE conductor resistance:
Insulation resistance:
Leakage current:
Check voltage/ no voltage:
Consumer current:
Difference current meas.:
Ranges:
0 ... 31
0 ... 310
0 ... 120
0 ... 3.5
0 ... 16
0 ... 31
Inaccuracy:
Ω ±(2.5% o. rdg. + 5 D)
MΩ ±(2.5% o. rdg. + 5 D)
mA
±(2.5% o. rdg. + 5 D)
mA
±(2.5% o. rdg. + 5 D)
A
±(2.5% o. rdg. + 5 D)
mA
±(5.0% o. rdg. + 5 D)
General service measurements:
Mains supply:
0 ... 235 V
Current:
0 ... 10 A
Temperature:
-200 ... +800°C
Resistance:
0 ... 150 kΩ
Active power:
0 ... 3700 W
Apparent power:
0 ... 4000 Var
Power factor:
0.0 ... 1.00
E 32
±(2.5% o. rdg.
±(3.0% o. rdg.
±(2.0% o. rdg.
±(1.0% o. rdg.
±(5.0% o. rdg.
+ 5 D)
+ 5 D)
+ 1°C)
+ 3 D)
+ 10 D)
Funktion Generators
Catalogue No.
2GA27 82-5A
Function generator Toellner 7402.
Frequency range:
0.5 Hz ... 5 MHz
Frequency offset: :
±2%
Functions:
sine, triangular, rectangular pulse,
amplifier, DC
Modes:
free running, external sweep control,
amplifier mode, frequency counter
Output amplitude:
Upp = 10 mV ... 30 V
15 Vpp at pulse mode
Output impedance:
50 Ω (free running and short circuit proof)
Reverse volt. protection: ≤ 120 V
DC-Offset:
0 ... ±10 V
Attenuator:
30 dB continuous and 20 / 40 dB in steps
Distortion:
< 0.5 % up to 100 kHz; < 5 % up to 5 MHz
Frequency counter:
10 Hz ... 30 MHz, 4-/5digit
Dimensions:
W = 265 mm, D = 280 mm, H = 147 mm
Function generator (without illustration)
Manufacturer Toellner Type 7404
Function generator
Manufacturer Toellner Type 7706
Catalogue No.
2GA27 82-5D
Function generator Toellner 7706
Frequency range:
1 mHz ... 12 MHz
Wave forms:
sine, triangular, rectangular pos./neg.
pulse, TTL, ECL, DC, variable symmetry
Modes:
free running, external sweep control,
amplifier mode, trigger and gate mode,
Output amplitude:
Upp = 10 mV ... 30 V
15 Vpp at pulse mode
Output impedance:
50 Ω (free running and short circuit proof)
DC-Offset:
0 ... ±10 V
Attenuator:
30 dB continuous and 20 / 40 dB in steps
Distortion:
< 0.5 % up to 100 kHz
Frequency counter:
10 Hz ... 30 MHz, 4-/5digit
Dimensions:
W = 265 mm, D = 330 mm, H = 147 mm
Catalogue No.
2GA27 82-5B
Function generator Toellner 7404.
Frequency range:
0.05 Hz ... 5 MHz
Frequency offset:
±2%
Functions:
sine, triangular, rectangular pulse, amplifier
DC, variable symmetry
Modes:
free running, external sweep control, amplifier mode, frequency counter
Output amplitude:
Upp = 10 mV ... 30 V
15 Vpp at pulse mode
Output impedance:
50 Ω (free running and short circuit proof)
Reverse volt. protection: ≤ 120 V
DC-Offset:
0 ... ±10 V
Attenuator:
30 dB continuous and 20 / 40 dB in steps
Distortion:
< 0.5 % up to 100 kHz; < 5 % up to 5 MHz
Frequency counter:
10 Hz ... 30 MHz, 4-/5digit
Dimensions:
W = 265 mm, D = 280 mm, H = 147 mm
Power-function generator
Manufacturer Toellner Type 7741
Catalogue No.
2GA27 82-5E
Power-function generator Toellner 7741.
Frequency range:
1 mHz ... 100 kHz
Frequency offset:
±5%
Functions:
sine, triangular, rectangular, pulse, power
amplifier, DC, variable symmetry
Modes:
free running, extern. sweep control, amplif.
Power output:
63 W
Output amplitude:
Upp= 45 mV ... 45 V
22.5 mV ... 22.5 V at pulse mode
Output impedance.
appr. 0 Ω (free running, short circuit proof)
Reverse volt. protection:≤ 120 V
DC-Offset:
0 ... ±15 V
Attenuator:
30 dB continuous and 20 / 40 dB in steps
Distortion:
< 0.5 % to 100 kHz; < 1 % to 100 kHz
Frequency counter:
10 Hz ... 30 MHz, 4-/5digit
Dimensions:
W = 265 mm, D = 480 mm, H = 147 mm
E 33
ELABOAccessories
Function generator
Manufacturer Toellner Type 7402
ELABOAccessories
Oscilloscopes
Oscilloscope analog 2 x 35 MHz
Hameg 303-6
Catalogue No.
2GA27 82-6F
35 MHz Analog Oscilloscope, Hameg, Type HM303.
A very important quality characterisic of this oscilloscope is the high
transmission quality of the measurement amplifier with max. 1 %
overshoot. The unit comprises of a component tester.
Specification:
Vertical amplifier: 2 channels DC ... 35 MHz (-3 dB)
rise time: < 10 ns
overshoot: ≤ 1%
input impedance: 1 MΩ II 20 pF
Horizontal amplifier:
0 ... 3 MHz (-3 dB)
Triggering:
automatic: < 20 Hz ... 100 MHz (≤ 5 mm) Screen:
8 x 10 cm
E 34
Oscilloscope analog/digital 2 x 40 MHz
Hameg 407
Catalogue No.
2GA27 82-6G
40 MHz Analog /Digital Oscilloscope, Hameg, Type HM407.
With autoset, readout/cursor, save/recall, RS232 interface and calibration menu. When used with autoset all settings are done auto-matically by the oscilloscope. All relevant mesasurement parameters and
various functions are displayed by readout at the screen.
Specification:
Vertical amplifier: 2 channels DC ... 40 MHz (-3 dB)
rise time: < 2.3 ns
overshoot: ≤ 1%
input impedance: 1 MΩ II 15 pF
Horizontal amplifier:
0 ... 3 MHz (-3 dB)
Digital:
refresh, single, roll, envelope, average
max. sampling rate: 100MS/s
Screen:
8 x 10 cm
Oscilloscopes
Catalogue No.
2GA27 82-6K
Colour Digital Osciloscope in flat format with up-to-date LC Display
Technology, Hitachi, Type VC-5430.
Specification:
Band width:
DC ... 50 MHz, 2kword / CH
Vertical resolution:
1 mV ... 5 V/div
Timebase:
5 ns / div ... 50 s / div
Max. sampling rate:
30 MS/s (2 channels simultaneously)
Trigger-source:
CH1, CH2, DIFF (differential), EXT
Waveform mathematics: Addition, Subtraction, Polarity inversion
I / O Interface:
RS-232 und Centronics
Panel control:
Fully programmable from an external
personal computer or other controller via a
RS-232C.
Printer output:
Hardcopies can be generated using an HP
printer or other printers.
Oscilloscope digital 60 MHz
Tektronix 210
Catalogue No.
2GA27 82-6L
Digital real-time oscilloscope Tektronix, Typ TDS 210.
Specification:
Band width:
60 MHz,
Sample rate range:1 GS/s
Channels:
two
Display:
LCD
Trigger-types:
edge, video, set (50%)
Trigger-modes:
auto, normal, single, sweep
Glitch-capture:
10 ns
Sensitivity:
2 mV ... 5 V / div
Vertical resolution: 8 Bits
Time base range: 5 ns ... 5 s / div
Capture types:
sample, average, peak direkt
ELABOAccessories
Oscilloscope digital
Hitachi 50 MHz
E 35
ELABOAccessories
Test Instruments
RCL-meter
Catalogue No.
2GA27 82-7A
RCL-meter "Philips PM 6303 A" with 4digit LC-Display.
Measuring rate:
2 measurings / s
Basic accuracy:
± 0.25 % ± 1 digit
Measuring ranges:
Max. resolution:
200 MΩ 1 mΩ
Resistance:
0.000 Ω ...
Capacitance:
0.0 pF
...
100 mF 0.1 pF
Inductance:
0.0 µH ...
32 kH
0.1 µH
Quality factor Q:
0.002
...
500
0.001
Loss factor D:
0.002
...
500
0.001
Parameter display:
Quality factor Q; Loss factor D; Parallel capacity Cp; Series
capacity Cs; Parallel inductance Lp; Series inductance Ls;
Parallel resistance Rp; Series resistance Rs; Impedance Z;
Phase angle
Counter
Toellner 6723
Digital clamp-on tester
Rev counter
Catalogue No.
2GA27 82-7J
Digital clamp-on tester BEHA CHB35, for measurements of AC and
DC currents of up to 400 A.
Specification:
Display:
3 3/4 digit, LCD, 3999 Digits
Ranges:
AC / DC 0.01 ... 400 A
Tolerance:
AC ± (1.5% o.rdg. + 3 D); DC ± (1% o.rdg. + 2 D)
Frequency meas: 0.01 Hz ... 1 kHz
Tolerance:
± (0.5% o.rdg. + 2 Digits)
E 36
Catalogue No.
2GA27 82-7D
Counter Toellner 6723.
Specification:
Frequency range: 1 mHz ... 160 MHz
Display:
maximal 9 digits, automatic range selection
with measuring units display MHz, kHz, Hz, mHz
respectively s, ms, ms, ns
Measuring time:
1 ms ... 100 s continuously adjustable
Input impedance: 1 MΩ / / < 35 pF
Modes:
frequency, period, speed, interpulse time,
event counting, pulse width, check
Catalogue No.
2GA27 82-7G
Rev counter, Lutron DT2238S.
Specification:
Display:
5 digit
Range selection:
automatically
Type of measurement:
opt. reflex 50 ... 300 mm mechanically
Range:
0.5 ... 999.9 ... 99999 1/min
Rotational speed:
0.05 ...1999.9 m/min mechanically
Inaccuracy:
± 0.05% ± 1 Digit
Accessories for Measuring Instruments
3B
3C
3A
3E
3D
3F
Catalogue No.
2GA27 83-3A
Passsive probe HZ 36
Safety crocodile clip
1 x black, 1 x red (pair), L = 81 mm
Catalogue No.
2GA27 83-3B
Standard-passive probe 1:1 / 10:1 (100 MHz)
Safety test clip
1 x black, 1 x red (pair), L = 155 mm
Catalogue No.
2GA27 83-3C
Passsive probe HZ 52
Attachable test probe
1 x black, 1 x red (pair), L = 140 mm
Catalogue No.
2GA27 83-3D
Passive probe 10:1 HF (250 MHz)
Safety test clip with insulated claws
1 x black, 1 x red (pair), L = 130 mm
Catalogue No.
2GA27 83-3E
Safety test clip with hook clamp
1 x black, 1 x red (pair), L = 99 mm
Catalogue No.
2GA27 83-3F
Coaxial-connecting cable BNC/BNC
50 Ohm L = 1.5 m
Catalogue No.
2GA27 83-3HZ01
Coaxial-connecting cable BNC/BNC
50 Ohm L = 5 m (without Illustration)
Catalogue No.
2GA27 83-3HZ02
Coaxial-T-piece
Catalogue No.
2GA27 83-3J
Catalogue No.
2GA27 83-3P
Catalogue No.
2GA27 83-3Q
Measuring leads with Kelvin terminals
Catalogue No.
2GA27 83-3S
Measuring leads with Kelvin terminals for four-wire measurement of
resistance. Lead length approximately 1.5 m.
E 37
ELABOAccessories
Adapter for 4 mm system
1 x black, 1 x red (pair), L = 49 mm
ELABOAccessories
Connecting Cables
A good mechanical and electrical contact reliability is demanded for the execution of measurement tasks.
In order to achieve this task, connecting leads, test probes and plug connectors are required in very good quality.
The bench racks, listed in Product Group C, are equipped for connection on-site to a terminal block.
On request, the racks can be supplied with a ready-made connecting
lead either with Schuko or Cekon plug.
E 38
2.5 m Connecting lead
3 x 1.5 mm2 with Schuko plug
Catalogue No.
2GA27 83-2A
2.5 m Connecting lead
5 x 1.5 mm2 with Cekon plug
Catalogue No.
2GA27 83-2C
Schuko-extension lead 5 m
Catalogue No.
2GA27 83-2D
Leads
Highly flexible safety connecting leads made from Lifty (651 x 0.07 mm = 2.5 mm2) with PVC-insulated wire, both sides with
ø 4 mm plugs and ø 4 mm in-line sockets.
Available in colours black, red, blue and yellow/green.
Length
Catalogue No.
Contents:
Colour
Length
black
black
black
black
150 cm
100 cm
75 cm
50 cm
2GA27
2GA27
2GA27
2GA27
83-5AZsw
83-5BZsw
83-5CZsw
83-5DZsw
black
black
black
black
150 cm
100 cm
75 cm
50 cm
2
5
12
19
red
red
red
red
150 cm
100 cm
75 cm
50 cm
2GA27
2GA27
2GA27
2GA27
83-5AZrt
83-5BZrt
83-5CZrt
83-5DZrt
red
red
red
red
150 cm
100 cm
75 cm
50 cm
1
2
3
5
blue
blue
blue
blue
150 cm
100 cm
75 cm
50 cm
2GA27
2GA27
2GA27
2GA27
83-5AZbl
83-5BZbl
83-5CZbl
83-5DZbl
blue
blue
blue
blue
150 cm
100 cm
75 cm
50 cm
2
2
4
5
yellow/green
yellow/green
yellow/green
yellow/green
150 cm
100 cm
75 cm
50 cm
2GA27
2GA27
2GA27
2GA27
83-5AZgg
83-5BZgg
83-5CZgg
83-5DZgg
yellow/green
yellow/green
yellow/green
yellow/green
150 cm
100 cm
75 cm
50 cm
1
1
1
1
Set of lab cords
complete with 66 safety lab cords
Quantity
Catalogue No.
2GA27 83-5H
ELABOAccessories
Selection table:
Colour
E 39
ELABOAccessories
Holder for Components and Connecting Leads
There are suitable holders available for a proper storage of connecting leads with various cable diameters and cable lengths
Some of the holders are conceived for wall mounting, others are designed for combined or mobile application.
Components and cable holder
for wall mounting
Catalogue No.
2GA27 83-6J
Semicircular component and leads holder for wall mounting. Cable
holder is made from powder-coated sheet aluminium to accept cables
of different diameters.
The polystyrene tray serves for the storage of components and clips.
Dimensions: W = 300 mm, D = 200 mm, H = 25 mm
Cable suspension device
threefold
Catalogue No.
2GA27 83-6K
Cable suspension device, three parts. Knock-resistant PVC, colour
grey, for easy wall-mounting.
Dimensions: W = 200 mm, D = 50 mm, H = 120 mm
Combination component and cable holder
wall mounting
Catalogue No.
2GA27 83-6M
Combination components and cable holder for wall mounting with
holder 83-6J storage tray 76-1J and cable suspension 83-6K, fitted on
a melamine resin coated chipboard.
Dimensions: W = 600 mm, D = 430 mm, H = 200 mm
Storage tray
Catalogue No.
2GA27 83-6L
Made from grey synthetic material for storage of small parts, test
probes, etc.
Dimensions: W = 390 mm, D = 80 mm, H = 40 mm
E 40
Combination component and cable holder
movable
Catalogue No.
2GA27 83-6P
Movable combination holder with 5-foot tubular steel base. On both
sides equipped with holder 83-6L.
For storage of small parts, lab cords and connecting leads.
Dimensions: W = 600 mm, D = 430 mm, H = 1600 mm
Mobile Holder for Connecting Leads
Catalogue No.
2GA27 83-6R
Movable holder for components and lab cords with 5-foot tubular steel
base powder coated, colour grey with 5 casters.
The circular cable holder with 30 different wide slots is suitable for
the storage of laboratory cords and connection leads of various cable
diameters. It is made from coated 3 mm sheet aluminium
(Diameter 380 mm).
The round polystyrene tray (Diameter 380 mm), serves for the storage
of small components and test probes.
Dimensions: W = 600 mm, D = 600 mm, H = 1600 mm
Cable suspension device
movable for 2 x 66 lab cords
Catalogue No.
2GA27 83-6S
Movable holder for lab cords with 5-foot tubular steel base, powder
coated, colour grey with 5 casters.
With melamine resin coated chipboard panel with 8 mm holes on both
sides, suitable for holding 2 x 66 connecting leads.
Dimensions: W = 600 mm, D max. 600 mm, H = 1600 mm
E 41
ELABOAccessories
Component and cable holder
movable
ELABOAccessories
EDP-Accessories
CRT council
Catalogue No.
2GA27 85-4E
Crt council made from 19 mm thick melamine resin coated chipboard. Suitable for setting up CRT's. Underneath space for keyboards.
Dimensions: W = 570 mm, D = 300 mm, H = 140 mm
CRT swivel arm
Catalogue No.
2GA27 85-4K
For easy handling of CRT's in all directions, upwards, downwards and
sidewards.
Total reach:
82 cm
Support surface: 378 x 378 mm
Load capacity:
3 to 33 kg
Special clamping fixture, inner width 65 mm.
Clamping fixture with inner width of 85 mm on request.
Adjustable keyboard support
Catalogue No.
2GA27 85-4F
For sliding under workbenches, vertically adjustable and rotatable
(360 °). Inclination adjustable by ± 15°. Made of formed synthetic material 550 X 265 mm with 450 mm long guide rails.
Vertically height adjustment by 145 mm, with mouse pad.
E 42
Footrest
Footrest
Footrest
Catalogue No.
2GA27 85-4N
Sturdy footrest, adjustable in height and inclination. Foot support with
rubber surface. Framework made from 40 mm tubular steel, greywhite powder coated, with vertically height adjusters for levelling of the
footrest.
Dimensions foot support:
W = 520 mm, D = 350 mm
Total dimensions:
W = 540 mm, D = 440 mm, H = 500 mm
ELABOAccessories
Catalogue No.
2GA27 85-4L
Footrest made of polystyrene, light grey, rugged surface.
Dimensions: W = 500 mm, D = 370 mm, H = 100 mm
Conductive footrest and other conductive equipment see Catalogue,
Product Group B Page 8 to 12.
E 43