Midwest Laser Products
98/99 Catalog #22
New and Used Lasers
and Components:
Helium-Neon
Argon / Ion
He-Cd
Nd:YAG / KTP
Ruby
New Lasers:
Laser Diode Modules
Laser Pointers
DPSS Lasers
Other:
Laser Lightshows
Optics
Holography
Books
Cover photo’s removed to conserve file size.
Midwest Laser Products
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
Page 1
QUICK INDEX
Argon/ Ion Lasers .................................
Books ..................................................
DPSS Lasers ........................................
Helium-Neon Lasers .............................
Holography ...........................................
Laser Diode Modules ............................
Lasershow Equipment ..........................
Optics ..................................................
Pointers ...............................................
Ruby Laser ..........................................
8
17
20
3, 6, 7
11
4, 5
11-16
10
9
20
Thank you for your interest in our laser products. Since 1989 the dedication of Midwest Laser Products to customer support and the provision of competitive and quality products has earned us a reputation of
integrity. We look forward to inquires as opportunities to provide better
services.
The laser parts in this catalog are sold as components only. Unless the
item is labeled as “C.D.R.H. certified”, the item is sold as a component
only. For information about C.D.R.H. regulations see the section with
the same heading on page 18.
Brief Laser Glossary
Class The Center for Devices and Radiological Health classifies lasers by maximum output power and
wavelength. The lasers in this catalog are class II, IIIa, IIIb, and class IV. The higher the class, the higher
the maximum power, and correspondingly, there are more safety precautions that must be maintained.
Divergence The full angle at which a laser beam expands. Expressed in milliradians (mRad.), it corresponds to approximately the number of millimeters the beam will spread for each meter of travel. For
example, a 1.5 mRad. divergence will correspond to 15 millimeters of beam spread at a 10 meter distance.
1.0
Relative Sensitivity
Apparent Power / Brightness The intensity of light as it appears to the human eye. The eye is most
sensitive to wavelengths (colors) in the center of the visible spectrum. Hence, green light will appear
brighter tthan any other color of light of the same power or magnitude. As another example, a 633nm red
Helium-Neon laser appears approximately eight times brighter than a red 670nm diode laser of the same
output power. See the diagram to the right for relative eye sensitivity versus wavelength.
0.1
0.01
0.001
0.0001
400
500
600
Wavelength (nm)
700
Milliwatt The power that gives rise to the production of energy at the rate of one one-thousandth of a joule per second. In less
technical terms, it is simply the amount of light energy.
Mode Only the single spatial mode, TEM00, provides a solid beam throughout its diameter. Multi-mode lasers have an increased
overall power output for the same size tube, however, the wavefront intensity is segmented.
Wavelength Electromagnetic energy is transmitted in the form of a sinusoidal wave. The wavelength is the physical distance covered
by one cycle of this wave. Visible light is in the electomagnetic spectrum from 400 nm to 750nm. Within this range we percieve the
light as being different colors. At 400nm light is a deep violet color, at 500nm- green, 590nm- orange, 700nm deep red.
Polarization With respect to a beam of electromagnetic radiation, the polarization direction is the direction of the electric field vector.
The polarization vector is always at right angles to the beam direction, and can be random (unpolarized beam), linear, or elliptical.
C.D.R.H. Precautions
The lasers listed in this catalog are classified as class II, IIIa, IIIb, and class IV. Depending on the type and power, all lasers should
be labeled with one of the following warning logos:
CAUTION
LASER RADIATION- DO NOT
STARE INTO BEAM OR VIEW
DIRECTLY WITH OPTICAL
INSTRUMENTS
DIODE LASER
Wavelength: 630 - 675nm
CLASS II LASER PRODUCT
DANGER
LASER RADIATION-AVOID
DIRECT EXPOSURE TO BEAM
DIODE LASER
Wavelength: 530-675nm
Max. Output: 5 mW
CLASS IIIa LASER PRODUCT
DANGER
LASER RADIATION-AVOID
DIRECT EXPOSURE TO BEAM
DANGER
LASER RADIATION-AVOID
DIRECT EXPOSURE TO BEAM
HELIUM-NEON LASER
Wavelength: 633nm
Max. Output: 5 mW
CLASS IIIa LASER PRODUCT
HELIUM-NEON LASER
Wavelength: 633nm
Max. Output: 50 mW
CLASS IIIb LASER PRODUCT
DANGER
DANGER
LASER RADIATION-AVOID
DIRECT EXPOSURE TO BEAM
DIODE LASER
Wavelength: 530-675nm
Max. Output: 50 mW
CLASS IIIb LASER PRODUCT
Midwest Laser Products
LASER RADIATION- AVOID EYE
OR SKIN EXPOSURE TO DIRECT
OR SCATTERED RADIATION
RUBY LASER
Wavelength: 694nm
CLASS IV LASER PRODUCT
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
DANGER
LASER RADIATION-AVOID
DIRECT EXPOSURE TO BEAM
ARGON LASER
Wavelength: 488-514nm
Max. Output: 300 mW
CLASS IIIb LASER PRODUCT
DANGER
LASER RADIATION-AVOID
DIRECT EXPOSURE TO BEAM
ARGON LASER
Wavelength: 488-514nm
Max. Output: 20 Watts
CLASS IV LASER PRODUCT
Page 2
Some applications of the lasers featured in this catalog include:
Holography
Surveillance
Research
Communications
Laser Shows
Medical
Science Fair Projects
Construction
Leveling
Pointing
Perimeter Alarm
Targeting
Acupuncture/Healing
Education
Fun
Helium-Neon Lab Laser
Designed for ease of use, this low-cost Helium-Neon laser is perfect for the lab, classroom demonstration, or anywhere a complete
Helium-Neon laser is needed. Comes with a pamphlet describing many different demonstrations and uses for the laser. Power
adaptor included.
FEATURES:
• 1.0 - 2.0 milliwatt output power
• On/Off switch with green LED indicator
• Fuse protection
• 120 Vac or 12 Vdc operation
• 632.8 nm wavelength
• Single mode (TEM00)
• Longitudinal Mode Spacing: 1085 Mhz
• 0.5 mm beam diameter
• 1.7 milliradian divergence
• Size:7.5" L x 4.5" W x 2.5" H
• One Year Warranty
• C.D.R.H. Certified
er
ng
Da
Item #: LL12-12
$139.00
Helium-Neon Laser Module
This is our least expensive helium-neon laser. The black plastic housing contains the He-Ne laser tube and power supply and operates
on 12Vdc. Manufactured by Laser Drive, Inc., these units normally sell for over $150.00 We have new and slightly used units for just
$49.95 each. All are warrantied for one year.
Specifications:
• Output Power 0.9 to 1.6 milliwatts
• 632.8 nm Wavelength
• Divergence is less than 1.7mRad.
• Beam Diameter: 0.5mm @ 1/e2
• Longitudinal Mode Spacing: 1085 Mhz
• Single Mode; TEM00
• Random Polarization
• Operates on 12Vdc; draws 600 mA
• Size: 6.25” x 1.375” x 2.25”
Item #: HNM2-12
120VAC to 12Vdc adaptor.
Used to operate the above laser on
standard wall current. Rated 800mA.
Item #: PP12
$12.95
Midwest Laser Products
$49.95
Audio Modulation Kit
This simple electronic kit includes parts and instructions to
send audio signals over a beam of light. It works with most
helium-neon lasers, but is particularly well suited to the laser
above. Audio is input through an isolated 8 ohm input. Requires a photo-amplifier to convert the modulated laser beam
back into audio.
Item #: AMK
$10.00
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
Page 3
Laser Diode Modules
All of our laser diode modules utilize index-guided lasers. These are preferred over gain-guided lasers for superior optical performance due to less astigmatism, and lower overall power consumption. Each module is reverse polarity protected, and emits a
continous wave (CW) beam. However, the lasers can be modulated using a modulated drive signal up to 600 Hz square-wave.
Our modulatable lasers feature a third lead for modulation, and can achieve bandwidths up to 500Khz.
Standard Laser Module
•
•
•
•
•
Adjustable Focus ( 6cm to Infinity)
Power Indicator LED
Stable Circuit Design
Rugged & Reliable
Six Month Warranty
SPECIFICATIONS:
Wavelength:
Polarization:
Max. Ambient Temp.:
Operating Voltage:
Operating Current:
Beam Divergence:
Output Power*:
635nm / 650nm
Linear 100:1 typical.
400C (1040F)
2.8Vdc to 4.5Vdc
65mA, typical
<1.3 mRad
0.8 to 0.95 mW (class II)
2.7 to 4.0mW (class IIIa)
0.8 to 0.95mW (class II)
2.7 to 4.0mW (classIIIa)
* Output power can be set to meet your specific needs.
Item
Item
Item
Item
#:
#:
#:
#:
VM63502
VM63503
VM65002
VM65003
$59.95
$59.95
$32.95
$32.95
} 635nm
} 650nm
QUANTITY DISCOUNTS AVAILABLE.
Industrial Laser Module
•
•
•
•
Adjustable Focus ( 3cm to Infinity )
Constant Optical Output Power Circuit
Rugged & Reliable Design
One Year Warranty
SPECIFICATIONS:
Wavelength:
Polarization:
Max. Ambient Temp.:
Operating Voltage:
Operating Current:
Beam Divergence:
Output Power*:
635nm / 650nm
Linear 100:1 typical.
400C (1040F)
2.8Vdc to 4.5Vdc
65mA, typical
<1.3 mRad
0.8 to 0.95 mW (class II)
2.7 to 4.0mW (class IIIa)
0.8 to 0.95mW (class II)
2.7 to 4.0mW (classIIIa)
Item
Item
Item
Item
6.5 to 7.5mW (class IIIb)
* Output power can be set to meet your specific needs.
QUANTITY DISCOUNTS AVAILABLE.
Midwest Laser Products
#:
#:
#:
#:
VM63512
VM63513
VM65012
VM65013
Item #: VM63513B
} 635nm
} 650nm
$69.95
$69.95
$43.95
$43.95
$225.00 - 635nm
C.D.R.H. / FDA Certified version of the Industrial Laser Module with power adaptor and on/off switch is
available for power outputs up to 5 milliwatts. Add
$65.00 to cost above.
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
Page 4
Laser Diode Modules
Slim Laser Module
• 5 milliwatt Diode
• 650nm Wavelength
• Divergence <1.0mRad.
• 3.0 to 4.5Vdc Input
• Smallest Diameter Laser Module
• Rugged & Reliable Design
• Six Month Warranty
Item #: SL650 $36.95
Our volume purchasing has allowed us to offer the lowest prices
in the industry and maintain quality
standards above our competition.
Deep discounts are available for
large quantity purchases. A knowledgable sales engineer is available
to help you with any questions you
may have about the use of these
lasers.
The output of these modules is
set to meet Class II, Class IIIa, and
Class IIIb requirements of 21CFR
1040.10 of the C.D.R.H. The modules can be used for research, studies, or on an OEM basis for incorporation into other products.
To comply with C.D.R.H. standards it is necessary for the final
product to completely enclose the
laser emisssion in accordance to
class I requirements or, if the beam
is accessible, carry the appropriate
warning labels, and emission control.
Our C.D.R.H. certified version of
the Industrial Laser Module with
power supply is ready to go and requires no additional certification.
See the Quick Glossary on page
two for information about the terms
used in this catalog, including information about the apparent power of
lasers.
Other styles and custom designs
available. Call to discuss your
needs.
ST Series Laser Modules Have Added Features
•
•
•
•
•
•
•
635nm
5 milliwatt diode
3.0 to 4.5Vdc Input
60mA typical current
Size: 1.60” x 0.41” diameter
Operating Temp. 10° to 40° C
One Year Warranty
Modulatable*
Item
60° Line Generator
Item
90°Line Generator
Item
Diffractive Crossed Line Item
#:
#:
#:
#:
ST635M
ST635L60
ST635L90
ST635C
$109.00
$105.00
$119.00
$119.00
*Signal input via third wire. Modulation Bandwidth: 200Khz typical.
DT Series High-Power, Modulatable Laser Modules
•
•
•
•
•
•
•
High Power
TTL or Analog Modulation to 500Khz
Optional Line Generating Lens
3 Element Glass Lens
Divergence <1 mRad.
Size: 2.0” x 0.5” diameter
Six Month Warranty
Laser Line Option (available in 30°, 50°, 90°) Projects a straight line of light Add $40
Item #: DT63510
Item #: DT65020
635nm 10mW diode
650nm 20mW diode
output: 6.5 to 7.5mW
output: 14 to 16mW
$349.00
$349.00
Laser Diode Module Power Supplies
Standard wall adaptor converts 115Vac to 3Vdc. Four foot cord from wall plug to small terminal block. Supplies up to 100mA
On/Off switch.
Item #: PP3 $24.95
Battery holder for 2 AA batteries with terminal block and on/off switch.
Midwest Laser Products
Item #: BH
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
$15.95
Page 5
Helium-Neon Laser Heads and Tubes
Helium-Neon Lasers are very popular due to their nice beam characteristics and relative inexpense. We have a variety of He-Ne
lasers, all of which output a single mode (TEM00), randomly polarized red beam (632.8 nm wavelength). These lasers are often used
for holography, demonstrations, alignment systems, lightshows, pointing, etc. See opposite page for corresponding laser power
supplies. Hard-sealed helium-neon lasers have a life expectancy of 10,000 to 20,000 hours. The lasers on this page have been pulled
from equipment. Each laser has been thoroughly tested and includes a six or twelve month warranty as indicated by the number
following the hyphen in the item number.
Figure 1
D es c r i p t i o n
Ou t p u t
P o w er
(m i l l i w at t s )
Figure 2
D i v er g en c e
(m R ad )
In p u t
Vo l t ag e
an d
C u r r en t
Mi n .
Max .
0.8 m W H ead
(Fi gure 1)
0.5
0.95
1.2
3 m W H ead
(Fi gure 2)
2.0
3.5
5 m W H ead
(Fi gure 1)
4.0
6 m W H ead
(Fi gure 1)
L as er H ead
D i m en s i o n s
It em
#
CDRH
C l as s
Pr ic e
L en g t h
D i am et er
1400 V D C
3.3 mA
12 i n.
1 7/8 i n.
HNH1-6
II
$45.00
1.2
1600 V D C
5.5 mA
11 i n.
1.5 i n.
sq r
HNH4-6
IIIa
$45.00
5.0
1.8
2400 V D C
6.5 mA
15 i n.
1 3/4 i n.
HNH5-6
IIIa
$89.00
5.1
6.0
1.8
2400 V D C
6.5 mA
15 i n.
1 3/4 i n.
HNH6-12
IIIb
$109.00
7 m W H ead
(Fi gure 1)
6.1
7.5
1.8
2400 V D C
6.5 mA
15 i n.
1 3/4 i n.
HNH7-12
IIIb
$135.00
8 m W H ead
(Fi gure 1)
7.6
8.5
1.8
2400 V D C
6.5 mA
15 i n.
1 3/4 i n.
HNH8-12
IIIb
$165.00
The output beam diameter of the above lasers is 0.7mm or less.
Small 1 milliwatt Helium-Neon Laser Tube
1 milliwatt Helium-Neon Laser Tube
An ideal tube for replacement or for the do-it-yourselfer who
wants to build a laser. Output power is between 0.7 and 1.5
milliwatts. Size: 5.75 in. x 1.0 in. diameter. Beam Diameter:
0.5mm Operating voltage: 1250Vdc Operating current:
4.0mA Item T4-6 is new surplus. Item T5-6 is new or used
surplus
Item #: T4-6
(divergence 1.3mRad)
$38.95
Item #: T5-6
(divergence 5.0mRad)
$24.00
This tube is ideal for replacement, or for the laser kit builder.
Output power is between 0.5 and 1.0 milliwatt. Comes in
various sizes, depending on our stock, largest size: 9.5in. x
1.25 in. diameter. Works well with the power supply kit on
the next page. Beam divergence: <1.8mRad (1.5mRad typical) Operating voltage / current: 1200 V / 4.0mA Some
tubes are new surplus, others are used.
Item #: T6-6
$24.00
Midwest Laser Products
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
Page 6
Helium-Neon Laser Power Supplies
When choosing a power supply for your laser, pick a power supply that matches the operating current specified for the laser head.
Helium-Neon lasers operate best at their recommended operating current. Operating the laser above or below the optimum current
will decrease laser output power, and can decrease the lasers operating life.
These switch-mode power supplies are the epoxied ‘brick’ type power supplies made by leading manufacturers such as Laser
Drive, Inc. and Power Technologies, Inc. All of the power supplies produce the necessary start-voltage to start the plasma tube.
For the purpose of this catalog, the following terms correspond to these maximum current ranges:
High-Current:
6.0mA and greater
Medium-Current:
6.0mA or less
Low Current:
4.5mA or less
115/230 VAC, High-Current
This power supply will run all of the 5 to 8 milliwatt laser heads
on the page to the left. Specifications are: Input: 115 or 230
VAC; output current: 6.5mA; output voltage: 2.2-2.6 KV. Size:
4 1/4 in. x 3 5/8 in. x 1 1/4 in.
Item #: PS7
$99.00
typical power supply
115VAC, Medium-Current
For lower power laser heads such as our 3 milliwatt laser, this
power supply is best. It is designed to operate 2 to 4 milliwatt lasers. Input : 115 VAC; output current: 3.7 to 5.5 mA,
adjustable; output voltage: 1800 Vdc. Size: 6in. x 1 1/4 in. x 1
1/8 in.
Item #: PS5
$65.00
12Vdc, Medium-Current
This compact power supply has an adjustable output
current of 3.0mA to 5.5mA. Run voltage is approximately
1800 Vdc. It will run 0.5 to 4 milliwatt lasers.
Item #: PS9
$65.00
24VDC, Low-Current
Input for this power supply is 21 to 26 Vdc @ 0.25A; output is
3.3mA @ 1.1 to 1.5 KV Designed to run a 1 milliwatt laser
such as our cat. # HNH1-6
Item. #: PS4
$39.00
Laser Power Supply Kit
Build your own laser power supply with this complete kit including pc board, parts, and instructions. This switcher power
supply has been used in many classrooms to demonstrate its
design. Uses a 555 timer, flyback transformer, and many
other parts. Size after assembly is 5 1/8 “ x 2 1/8” x 4”. This
power supply will run 0.5 to 2 milliwatt laser tubes.
Input:12Vdc, 1.5A max. Output current: 2.5 to 4.5 mA adjustable. Includes ballast resistor.
Item #: PS2
$38.95
Midwest Laser Products
12VDC, Low-Current
This power supply is designed to run 0.5 to 1.5 milliwatt HeNe lasers. Input is 12Vdc; output is 4.0 mA / 1250 Vdc. The
power supply has a built in ballast resistor. Manufactured by
Laser Drive, Inc. this is the same power supply that is used in
our HNM2-12 laser module on page 3. Metal contacts for
laser connection.
Item #: PS8
$15.95
(5 or more units only $10.00 each)
We carry a complete line of helium-neon laser power supplies.
If you don’t see what you need, call for price and availabilty.
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
Page 7
Argon Lasers
Rebuilt Omnichrome 532 or American 60X Argon Laser Head
Your choice of an Omnichrome model 532 or American 60X argon laser head reconditioned with a
new anode, new brewster windows, baked-out, and re-gassed. We guarantee it will produce greater
than 100 milliwatts at 9.5 Amps.. Output is all lines: 457 - 514 nm, multimode. Single mode (TEM 00)
also available. Linear polarization >100 to 1. Beam divergence is less than 1.7mRad. Single line
blue (488nm) is also available. Twelve month warranty when purchased with a power supply,
umbilical cable and fan below.
Item #: ARGH-12
$1,450.00
Item #: ARGS-12 (>220mW with NEW hard-sealed* tube, <1mRad. diverg.)
$2,600.00
* A Hard-sealed tube means no external optics to align or get dirty.
Used American 60X or Omnichrome 532 Argon Laser Head
These used argon laser heads produce greater than 30+ milliwatts output power. Output is multiline
(488 - 514nm), with beam divergence less than 1.8mRad. Rated power is at 10 Amps.
Item #: A60X1-6
(30+ milliwatt)
$650.00
Item #: A60X2-6
(60+ milliwatt)
$900.00
Argon Laser Power Supply
New Air-cooled argon laser power supply designed for use with the Omnichrome model 532,
American model 60X, and the NECmodel 3030 lasers. Features a toggle switch for fan on/off,
key switch for laser on/off, laser current control knob. Operates on 120VAC. Optional 220VAC
model available.
Item #: ARP-12
$895.00
Laser Umbilical Cable
Cooling Fan
This umbilical cable is required to connect the
laser with the power supply above. Four feet
long. New, quality constructed cable.
Item #: UMB
$150.00
Required for cooling any of the above aircooled lasers. Rotron or squirrel-cage
type available.
Item #: FAN
$39.00
Water-Cooled Ion Lasers
We get many different brands and models of ion lasers. Conditions of these lasers vary. Some
are used, some have low hours, and others are newly rebuilt. Call for availability and pricing.
•
•
•
•
•
Midwest Laser Products
American Laser Corp.
Lexel Laser Inc.
Spectra-Physics
Coherent
Laser Ionics
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
Page 8
Laser Pointers
Our pointers feature shorter wavelengths than the standard 670nm wavelength laser pointers. At 650nm and 635nm wavelengths, our
pointers appear four to seven times brighter than standard laser pointers! New holographic optical elements (HOE’s) allow our
pointers to project images other than just a simple dot. At these prices, everyone should have one.
PROJECT IMAGES UP TO 100 FEET!
•
•
•
•
•
Bright
Quality Construction
Retail Packaging
One Year Warranty
Safe- Complies with all FDA
laser safety regulations.
Laser Enthusiasts Note:
These HOE’s can be used
with any laser!
Keychain Laser Pointer with Special Tips
The next generation of laser pointer is here! It features interchangeable tips to project
different images. The tips use a small holographic optical element (HOE) to produce the
pattern. The pattern size is typically about 2 feet when the pointer is 20 feet away. Under
dark conditions, a large image can be projected and seen from over 100 feet away! The
pointer can also be used as a standard pointer projecting only a dot. The dot is visible up
to a mile away at night! Includes three LR44 batteries. Approximate Size: 2.5” x 0.5”
diameter. Battery life: 3 to 4 hours. Wavelength: 645-650nm. <5mW Class IIIa laser.
Item #: LPHOE6
(6 different tips)*
$25.95
Item #: LPHOE42
(42 different tips)
$39.95
Item #: LPMINI
(spot only)
$21.95
Item #: LR44
Set of three replacement batteries
$ 1.95
* Generally includes the five images in the first row of the picture.
Fun: Create hours of entertainment
for you and your cat or dog. Watch
as they try relentlessly to ‘catch’ the
spot!
Standard Laser Pointer
This bright laser pointer can be seen hitting objects up to a mile away at night! The pointer
features high-quality construction. The body of the laser is made of metal and features a
positive-feel pushbutton switch for laser activation. Retail Packaging. Two AAA batteries
included. Wavelength: 645- 650nm. <5mW Class IIIa laser.
Item #: LPST
$26.95
Item #: LPULTRA
(Ultra-bright 635nm)
$59.95
Laser Pointer and Pen in One
This dual use laser pointer also functions as a pen. The push-button switch on the side
activates the laser. Uses standard ink refills and three LR44 watch batteries for the laser.
Available with or without interchangeable HOE tips.
Item #: LPPEN
$34.95
Item #: LPPENH4
(includes 4 interchangeable HOE tips)
$38.95
DANGER
We have over eight years of experience with laser pointers. We offer the lowest volume pricing- guaranteed. For large quantity purchases we can print your company name / logo on each one. Less than one
milliwatt Class II, CE approved laser pointers are also available.
Midwest Laser Products
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
LASER RADIATION - AVOID
DIRECT EYE EXPOSURE
DIODE LASER
Wavelength: 630 - 650 nm
CLASS IIIa LASER PRODUCT
Laser Pointers are not a childs toy.
Page 9
Optics
COLLIMATOR Laser collimator, AR coated for red light. Used in the military as part of a laser
range finder. This collimator will reduce the beam spread (divergence) of a laser.
Item #: A8
$37.00
FRONT SURFACE MIRROR Small front surface mirror will reflect 90% of visible light. New,
individually packaged. Size: 21 mm square. Thickness: 1 mm
Item #: A3
$2.50
DIVERGING LENS This plano-concave lens is mounted in a 1" square aluminum mount. Used to
'spread out' a laser beam. It could be used as the first lens of a collimator or to view holograms.
Item #: A5
$4.50
ACRYLIC DIVERGING LENS Similiar to the diverging lens above, minus housing.
Item #: A7
$1.75
LINE GENERATING OPTIC This small glass optic will produce a line of light from your laser. Also
good for "sheet of light" lighting effects.
Item #: A6
$4.50
LINEAR DIFFRACTION GRATING A clear sheet of acetate with 13,400 grooves per inch. When white light encounters the grating, it
is diffracted, or broken up into the full rainbow spectrum.When monochromatic laser light hits it, it creates three dots, a zero order and
two first order dots. Size: 6” x 6”
Item #: DIFF1
$5.00
LINEAR DIFFRACTION GRATING Either a clear sheet of acetate, or a small square piece of glass, these grattings produces several
orders of light from a single beam. Use two (or cut one in half) and shine a laser through both of them while rotating them. You will
see a marvelous display of dots seeming to move in 3-D. Or use them alone to create a fan of beams!
Item #: DIFF4
(Produces four bright orders, 7 spots) 4” sqr. acetate film
$17.00
Item #: DIFF5
(HOE that produces more orders and wider angle) 1/4” glass
$49.00
Item #: DIFF6
Machida Grating (Over 50 orders, 175° angle) 1/4” glass
$395.00
BURST DIFFRACTION GRATING This diffraction grating produces a two-dimensional array of dots when a laser shines through it.
Use two of these (or one of these and one of the above diffraction gratings) to produce stunning 3-D effects by shining a laser through
both of them while rotating them.
Item #: DIFF2
(1 inch sqr.)
$5.00
Item #: DIFF3
(4” x 4”)
$15.00
POLARIZING FILM Use to pass only linearly polarized light, or create polarized light from a randomly polarized source. Experimental
grade.
Item #: POLF
$5.00
DICHROIC FILTERS Transmits one color and reflects the rest. Often used for seperating the lines of a multi-line
Argon. Size: approximately 1 square cm.
Color
Item # Price
Color
Item # Price
Color
Item # Price
Green (535 nm) DG
$8.00
Blue (485 nm) DB
$8.00
Red (635 nm) DR
$8.00
laser such as
NEUTRAL DENSITY FILTERS An assortment of four neutral density filters of varying densities. Size: 13/16" x 7/16"
Item #: NDF
$5.00
See opposite page under “Holography Accessories” for additional optics.
Electronic Parts
Photodetector Sub-Assembly
These sub-assemblies were pulled from barcode readers. Good for building your own low
power photometer or photo-amplifier.
Item #: PDS
$4.95
Midwest Laser Products
Ballast Resistor
150K ohm, 2 watt. Quantity 2.
High-Voltage Diodes
3KV at 200mA. Quantity of 8.
High-Voltage Capacitors
0.0047 MF, 3KV. Quantity of 4.
High-Volatge Capacitors
47 pF, 3KV. Quantity of 6.
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
Item #: P2
$1.50
Item #: P3
$6.00
Item #: P4
$3.00
Item #: P5
$3.00
Page 10
Holography
Holography - the recording of three-dimensional objects using a laser light source - is a rapidly growing science that can offer you the
opportunity to enhance your creative horizons. We carry a complete array of holography materials for the beginning and intermediate
holographer.
Holokit- A beginners basic holography kit.
Holokit is the basic kit for producing holograms. It consists of a sheet of 30 x 40 cm Holofilm in a light-tight tube, a spherical mirror
(for spreading the laser beam), JD-2 chemical processing kit, and instructions- "Laser Holography- Experiments You Can Do". This
kit requires a 1 milliwatt or greater Helium-Neon laser, and a few other items available at any hardware store.
Item #: H1
$99.00
Holography Accessories
Item
Vibration Isolation Pads 1" square x 1/4” thick
Holographic Film, 25 sheets 2" x 2.5", AGFA acetate base
Film Developing Kit (Developer & Bleach)
Safe Light (for holographic film)
Spherical Mirror
Beam Splitter 1:1, 1" x 1" x 3mm
Beam Splitter 2:1, 1" x 1" x 3mm
Homemade Holograms, by John Iovine, 230 pages
Item #
HA1
HA2
HA3
HA5
HA7
HA8
HA9
B5
each
Price
$ 2.50
$65.00
$30.00
$25.00
$16.00
$ 9.00
$ 9.00
$19.95
Marching Band white light reflection hologram- 1965 vintage! This hologram is one of the first
mass-produced holograms. It depicts nine men in a marching band, the front three men appear in
front of the film, and the other six appear behind the film. Excellent quality. Size: 4” x 5” film. Made
by Conductron/McDonald Douglas. This hologram is a genuine collectors piece!
Item #: HOLOMB
Only $16.95
Laser Lightshow Glossary
Beam Effect Using the lasers beam as a sculptural element in space (as opposed to shining it on a wall to create graphics) . A
common technique is to scan the beam through theatrical smoke. If a line is scanned you will see a plane of laser light; if a circle is
scanned you see a cone.
Lumia A gauze-like effect produced by shining a laser beam through distorting material such as rippled glass.
Scanner Any device which moves back and forth; usually refers to a galvanometer scanner. Two are needed to draw laser graphics.
A mirror on each scanner moves in response to an electrical current. The scanners are arranged so the beam reflects first off one
mirror, then off the other. The first mirror moves the beam horizontally, the second moves it vertically. This arrangement means the
scanners can position the beam anywhere within a square area. By repeatedly scanning the same signal at high speeds, the illusion
of a single, fixed image is created.
Scanner Amp An electronic device which conditions a signal from a computer or other source, and makes it compatible with
galvanometer scanners. Closed-loop scanner amplifiers are used with position-detecting scanners; the amplifier controls the scanner
based on position feedback signals. Open-loop scanner amplifiers are used with non-position detecting scanners.
Laser Projector Equipment which takes a laser beam and produces projected graphics or beam effects.
Vector Graphics Images created by moving from point to point —examples include handwriting and computer plotters. Most laser
graphics are vector graphics. To produce a laser graphic, a computer is first used to draw a series of connect-the-dot points. These
are translated to electrical signals and are sent to the scanners. At the projection screen, the moving beam travels from point to point
at high speeds, smoothing out the dots. This creates the illusion of a fixed, non-moving image.
Blanking The technique of turning the laser beam on and off with precise control (as opposed to chopping). For scanned graphics
blanking allows images to have disconnected sections where the beam is hidden. Blanking can be digital (on/off) or analog (continuous intensity control). Blanking can be performed with a third scanner, an acosto-optic modulator, or by electronically contolling the
laser output as done with semiconductor lasers.
ILDA Speed Ratings The International Laser Display Association has developed a standard to measure the performance of
scanners and scanner driver cards. The two most common “standard” speeds for scanners is 12,000 points-per-second and
24,000 points-per-second while displaying the ILDA test pattern. Speed standards are designed to help make artwork compatable
with different scanners and scanner amps. When displaying artwork that was designed for slower scanners on high-speed scanners, the points that make up the artwork may become apparent. To eliminate this the scanners must be tuned to a slower speed.
Midwest Laser Products
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
Page 11
Lasershow Designer Software
Make your own professional quality laser light shows quickly and easily, with the best selling Lasershow Designer. Whether you've
been doing shows for years or you're new to lasers, you'll find that LD has the power and simplicity you want; after all, that's why more
members of the International Laser Display Association (ILDA) use the LD series than any other laser lightshow software.
Features:
• Runs on a PC with Windows 3.1, Windows 95 or Windows 98
• Drawing program works like popular PC paint programs
• Drawing window is resizable and movable
• 5 levels of undo in the drawing program
• 25 built-in fonts
• Raster-to-Vector Image Conversion, also known as “autotracing”
• Timeline-based animation program works like popular multimedia programs
• Perform many animation techniques including frame-by-frame, morphing and others
• Project and control up to 32 images from each set of scanners (multi-track output)
• Has the ability to playback CD-ROM, WAV and MIDI audio along with show
• Includes capability to synchronize to SMPTE or AVL timecode (with added hardware)
• Includes live control capability (handy for discos and other live environments)
• Includes extensive documentation to write your own control-panel programs
• Industry’s highest output resolution (16 bit X, Y) for ultra-smooth motions
• TTL and MIDI outputs provided to control external devices
• Includes 26 song-length shows (13 with LD Intro) and thousands of clip-art frames
• Free lifetime updates
• Try it risk free: 90-day unconditional money-back guarantee
LD Control Screen
Buy Only What You Need
The LD series consists of three programs: LD Professional , the full-featured program, LD
Basic, an intermediate program, and LD Intro. LD software comes on a CD-ROM and
includes the QM32 card, a full length ISA /EISA card. All three versions can playback any
LD show with full effects. They differ in how powerful the editing and playback features
are. The above features are common to all three versions. The most notable differences
between the three versions are listed below.
LD Showtime Screen
Feature
LD Professional
LD Basic
LD Intro
Draw true 3D frames
2D warping
Yes
180° & 360° curve,
spiral, fish-eye lens
Yes
No
180° & 360° curve,
spiral, fish-eye lens
No
No
180° & 360° curve,
spiral
No
256
Yes
Yes
3 oscillator banks,
color modulator,
arbitrary waveform
4
32
Yes
Yes
Yes
LDPRO
$6,995.00
48
Yes
Yes
2 oscillator banks,
color modulator,
4 waveforms
2
16
Yes
Yes
Yes
LDBASIC
$3,495.00
24
No
No
1 oscillator bank,
color modulator,
4 waveforms
1
3
No
No
No
LDINTRO
$1,995.00
Image masking
(foreground objects hide background objects)
Simultaneous drawing colors
Create raster (TV type frames)
Create ‘high-performance’ vector frames
True abstract frames
(psychedelic images as seen in classic
planetarium shows)
Maximum number of X-Y scanners
Maximum number of animation tracks
Real-time morphing capability
Accelerate, decelerate, and other rates
Output show as a series of ILDA frames
Item #
Price
Satisfied Lasershow Designer Users
LD is used by over 500 professionals in 32 countries. Top sites and laser companies include: Walt Disney World, Sea World (FL, OH, TX), Mirage Hotel, General Scanning,
Cambridge Technology, Spectra-Physics, Laser F/X, Laser Fantasy International, Lightspeed Design Group, AVI Imagineering, and Image Engineering Corp.
Remember, we are so sure you will love Lasershow Designer that we give a 90 Day Unconditional Money-Back Guarantee!
Midwest Laser Products
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
Page 12
Lasershow Equipment
To produce a computer-controlled laser lightshow will require a computer, lasershow software, a laser projector , and of course
a laser. Laser projectors consist of at least an X-Y scanner, a shutter, and warning labels. Additional options include a color
control crystal (PCAOM) for point-to-point color control and blanking, and a beam effects rail for directing the beam to other effect
generators.
Stardust Laser Projector
Need fast and efficient color control along with the fastest available scanning speeds? We have what you are looking for! The
Stardust Laser Projector utilizes your choice of scanners, General Scanning’s G120D’s or Cambridge Technologies’ 6800 series
scanners. Scanner response is the industries highest- 30K ILDA speed rating. Color control is achieved through a fast eight channel
poly-chromatic acousto-optic modulator (PCAOM). The Excalibur is efficient, typically delivering > 80% of the laser light from input to
output. The projector consists of two rack-mount control boxes and a completely enclosed black anodized aluminum scanner
assembly. The scanner assembly features quick access with a slide off top for laser alignment. It consists of the color selecting
crystal (with Bragg angle adjustment), beam steering mirrors, and x-y projector assembly with adjustable pitch through 270 degrees
with electronic shutter. Includes all cabling, including the computer cable. One year warranty. C.D.R.H. certified.
Item #: ELP-12
$8,875.00
General Scanning Gavlonometric Scanner Kits
We have new surplus General Scanning G124 and G100PD scanners and therefore offer these kits at an exceptional price. Each kit
is an X-Y scanning system that performs at the 12K ILDA speed or higher. The G124 kit uses special scanner amps which utilize
back-emf (velocity) feedback. Each kit is complete and includes two scanners, two scanner amps, two front-surface mirrors glued to
mirror mounts, two scanner mounts, and the power supply. If assembled into a laser projector, C.D.R.H. certification is required.
Input Signal is 0.5 to 10 Volts (peak-to-peak). Maximum angular deflection is 40° opticalfor the G100PD’s and 45° for the G124’s.
Availability is limited to quantity on hand.
Item #: SLPKIT (Uses G124 scanners. 12K ILDA)
$999.00
Item #: SLPKIT2 (Uses General Scanning G100PD scanners. 12K ILDA)
$999.00
Item #: SLPKIT3 (Uses G100PD scanners and TurboTack card. 24K ILDA speed guaranteed)
$1875.00
Cambridge 6800H Scanners High perfomance scanners designed for laser lightshow use. Includes scanners, high-power mirrors,
x-y mount, and power supply. Wide scan angle, up to 80° optical. Quick delivery. 30K ILDA speed.
Item #: CAM6800
$2295.00
General Scanning Surplus G124 Scanners. These open-loop scanners can be used with the driver card
below to achieve closed-loop performance. New surplus.
Item #: GS124
$245.00
G124 Scanner Amp for use with General Scanning's G124 scanners. Uses back-emf feedback to achieve
closed-loop performance. Official 12K ILDA speed rating! Single channel, requires +/- 15Vdc at 1.5A.
Item #: ACC
$175.00
TurboTracks Scanner Amp. Two channel amp will drive two G120PD or G100PD scanners to 30K ILDA,
or two Cambridge 6800H scanners to 30K ILDA. Seperate on board circuitry for each type of scanner. This
is the only known scanner amp to drive GS scanners to 30K ILDA.
Item #: TURBO
$975.00
Scanner mirror and mount for General Scanning G100 series scanners (including G120D’s and G124’s).
High-power dielectric mirror for lasers up to 40 Watts.
Item #: GM1
$ 45.00
New 8 Channel PCAOM with Bragg-mount. Ready to use with your scanners. Each channel is easy to
adjust with wavelength dial. Rack-mount system. 2.5mm crystal. 5W maximum power. 110/220 Vac.
Item #: PCAOM8-12
$3950.00
New 4 Channel PCAOM with Bragg-mount. Designed for low power systems up to 1 Watt. Crystal size: 1mm.
Item#: PCAOM4-12
$2500.00
Midwest Laser Products
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
Page 13
Accurate Beams, Graphics, and Text
This is a true breakthrough for laser entertainment! The GXL is the first laser system to provide scrolling text, crisp animation, and
greatbeam-effects for under $800.00! This sytem is easy to use and does not require a constant operator. The built-in microphone with automatic gain control (AGC) allows you to set the system to change images to the music.
With the GXL, you can program your own show using the twelve open storage slots. Each slot can contain any of the pre-programmed animations, abstract patterns, text, beam effects, or your own drawing. Drawing images is fun and easy using the
remote control. Draw a figure using up to 32 points in a connect-the-dots type fashion.Your drawings can even include turning the
beam on and off for drawing separate objects. You can also use its beaming feature to create beam effectsthat that change to the
music. The typical scan angle is 18.5° e.g. a three foot image is projected from nine feet away.
Graph
ics an
d Text
s
Effect
Beam
actual photos
Trade
S
Nightc
effects
beamCreate smoke
or
in fog
hows
lubs
D.J.’s
Parties
•
•
•
•
•
•
•
Beam Effects
Graphics and Text
Animation’s
Scrolling Text up to 512 Characters
Internal Record / Playback
Built in Red or Green Laser
Safe- C.D.R.H. / FDA approved
Built In Animations Include:
• Talking Face (eyebrows, and mouth move to sound)
• Dancing Guy (legs and arms move to sound)
• Beating Drum (drum sticks move to sound)
• And More!
GXL Lightshow System
Item #: GXLR
5mW Red Laser
Item #: GXLG 5mW Green Laser
$ 795.00
$1850.00
• Beam Blanking and Chopping
• Built-In Microphone with AGC
• Optional Real Time Clock Display
• Infrared Remote
• Low Power Requirements
• Includes 12VAC adaptor, UL/CSA
• Size: 4.5” cube Weight: 3.5 lbs
Make
sc
annou rolling
nceme
nts
• The GX Lightshow Sytem is the same as the GXL, but
without text capability.
• 5mW Red Laser is the brightest possible red laser (635nm).
• The 5mW green laser appears 4 times as bright as the red
laser.
GX Lightshow Sytem (no text capability)
Item #: GXR
5mW Red Laser
$ 595.00
Item #: GXG
5mW Green Laser
$1650.00
* If you would like to use the GXL or the GX with your own laser, they are available with a built-in blanking scanner for $1,250.00
and $995.00, respectively. For really intense beam effects, a more powerful laser can be used, however, the unit will no longer be
C.D.R.H. certified.
Midwest Laser Products
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
Page 14
Laser Lightshow Equipment
BeamScanTM Programmable Laser Projector
An easy to use yet powerful laser show system designed with the musical entertainment industry in mind.
Rugged design for Nighclub and Mobile DJ Environments. The Rack Mount controller has a computer built
in, no PC is required. A 25 foot cable with connectors
allows for remote scan head location. Programming
functions allow the user to create simple or very complex sequences of patterns and beam effects. Sequences are "played back" like a slide show - displaying each frame (which can be factory-programmed, user
programmed, or just a single beam) at a programmed
position for a programmed time duration. Frames can
also be advanced by Music Trigger using an external
audio source. Although the scanners are not fast
enough to do any animation, the geometric figures
and beam effects are dazzling. A programmable “kaleidoscope” diffraction gratting also adds to the effects.
Works with any laser. Model XYP-1000
Cat. #: BMS
$675.00
Features:
• Operates by itself
• Backlit LCD display / Membrane keypad
• Numerous preprogrammed patterns and
sequences.
• Exteranl audio inputs and trigger
• C.D.R.H. Approved
Also available with a built-in 5 milliwatt red 635nm Laser Diode. The laser is powered by the main controller.
Item #: BMS2
$795.00
With 5mW Green Laser (532nm) This wavelength appears four times brighter than 635nm (red)
Item #: BMS3
$1,499.00
F-150 Fog Machine
The F-150 features a compact design while still using high quality components such as a 700W heat exchanger, and high output pump. Includes
30' remote and internal 1 Qt. fluid tank. It can produce 30 seconds of
continuous fog. With the remote set for continuous fog, (the unit will cycle
on and off every couple of minutes), one quart of fog juice will last over 24
hours! Great for mobile shows and laser demonstrations.
Item #: F150
$255.00
FOG JUICE- High-quality formula from Martin. Water-Glycerin base. Does not leave a greasy residue. One Gallon.
Item #: FJ1
$45.00
Fantasy FX / Cloud-In-A-Can
Fantasy FX is a portable and inexpensive alternative to a fog machine. Fantasy FX is a aerosal spray for
creating fog effects for increased visibility of mid-air lighting. It is also known as “Cloud-In-A-Can” and
“Diffusion”. It is safe, non-toxic, non-irritating, and meets EPA standards. A single 8 oz. can will fill a
standard size room several times over. It stays in the air for up to 45 minutes. Great for classroom
demonstrations.
Item #: FFX
$18.95
Midwest Laser Products
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
Page 15
Laser Lightshow Components & Accessories
Spirograph Kit
This kit allows you to project spirograph and lissajous patterns on walls and ceilings using your laser.
Change the pattern by changing the speed of the motors. Comes complete with 2 motors, round
mirrors, rheostat control for each motor, and instructions.
Item #: SK
$19.50
X-Y Scanner
X-Y Scanners with front surface aluminum mirrors and mounting bracket. Designed for low speed
scanning and beam positioning. Frequency Response: DC to 300 Hz. Deflection angle: +/- 15 degrees.
Input Voltage: 12 Vp-p.
Item #: LS3
$85.00
X-Y Open-Loop Scanner Driver
The SA-100 open-loop scanner amplifier is designed for use with open-loop scanners. Input signal
from your stereo, function generator, musical keyboard, etc. into the RCA jacks. Create all sorts of
effects, including geometric shapes, lissijous, and quadrature patterns. The potentimeters control the
gain (size of the pattern). The SA-1003 has two additional pots for controling the chopping frequency
and duty cycle. Requires 12Vdc @ 500mA (Our Cat. #:PP12 adaptor for $14.00 works well.)
Item #: SA1002 (X-Y)
$59.00
Analog Pattern Generator Board
This board is a scanner amplifier and function generator in one. Using the sliding controls you can
change the patterns and size. Two sets of RCA jacks allow you to input audio from other sources, such
as a stereo, music keyboard, or guitar. You can mix them with the signals on the board, and using the
other set of RCA jacks you can record all the signals for easy playback of the patterns. Requires 12Vdc
@500mA (Our Cat. #:PP12 adaptor for $14.00 works well.)
Item #: APG
$175.00
Laser Show Designer 1000 Software
For those whose budget won't allow the LD series of software and are willing to work with an older computer, we offer you LSD. LSD is
the predecessor to the LD series of software. This software sold for $995.00 in 1987 through 1991. Now it is available for only $50.00!
LSD1000 software is still the best software we have seen in the under nine-hundred dollar price range. It requires an Amiga computer with
at least one megabyte of memory, version 1.3 ROM, and a simple modification to the computers audio circuitry. We suggest using this
software with the Scorpion Laser Projector and laser of your choice.
•
•
•
•
•
•
•
•
•
•
Runs on the Amiga 500, 1000, and 2000 computers
Pull-down menus, buttons and gadgets
EZ draw tool for free hand drawing
Many drawing tools, including, line, point, rectangle,
circle, symmetry, resize, rotate, grid, flip, move, etc.
Display text in several types and sizes
Rotate, move, and animate frames automatically
Scan and animation rates controlled independently
Three types of frame mixing
Includes auto-LSD, a simple scripting program
Many frames and animations included, free
Item #: LSD1000
(4 disks)
$50.00
We can supply Amiga 500 computers with a 3.5" disk drive, mouse, one meg of memory, V1.3 ROM, and the audio circuit modification completed, for only $299.00. A used Amiga color monitor is available for $150. The Amiga computer is a multimedia computer
with a graphical user interface (point-and-click).
Midwest Laser Products
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
Page 16
Books
Lasers, Ray Guns, & Light Cannons by Gordon McComb. This book is an updated version of The Laser Cookbook by the same
author. Renowned electronics writer Gordon McComb shows you how to build more than 88 exciting projects with inexpensive, easily
obtained components and step-by-step illustration-laden instructions. In addition to ray guns, light shows, and holograms, he gives
you clear, complete, and tested plans for constructing projects that: Detect intruders around a perimeter; Precisely measure the speed
of light; Use lasers to study hydrodynamics; Confirm earthquake potential; Modulate sound with light; Perform laser "snooping";
Explore fiberoptics; perform simple scanning; Throw a switch with light; Transmit data with lasers; measure objects' speed with high
accuracy; Carry your voice over a beam of light; And much more! Laced with fascinating scientific history, this book of field-tested
projects is organized to facilitate your own creative construction! 432p. 224 illus.
Item #: B8
$21.95
Optoelectronics, Fiber Optics, and Laser Cookbook by Thomas Petruzzellis. A hands-on sourcebook of optical circuits--with real
applications and projects. One of the hottest fields in electronic technologies today, optoelectronics is rich in possiblities and potential.
This practical guide to optical circuits--including fiber optics and lasers--presents a collection of state-of-the-art experiments and
projects for the student, technician, and hobbyist. Detailed, easy-to-follow discussions of optoelectronics explain the essentials of the
field, as well as the future trends, in nontechnical terms. Fun and challenging projects clearly demonstrate how optical circuits work
and how they can be applied in practical and efficient ways. You will save time, money, and energy with dozens of do-it-yourself
projects. Protect your home with windows and door leak detectors, lightning monitors, flame sensors, and power outage and laser
perimeter alarm systems; create your own solar photometers and photo flash meters; monitor your surroundings with laser seismographs and laser rangefinders; expand communications with high-speed fiber-optic data links and wireless IR speaker systems. All
projects are illustrated with circuit diagrams and schematics, and accompanied by complete parts lists. And a handy appendix of
suppliers tells you where to buy the parts you'll need. 322p 243 illus.
Item #: B9
$29.95
Homemade Holograms Aimed at those with little or no laser experience, this book covers the basic methodology and equipment
required to make an array of holograms. John Iovine describes all-new procedures--using equipment readers can make themselves,
rather than expensive commercial systems--that take the complexity out of producing simple white-light-reflection and transmission
holograms of people, computer graphics, and solid objects. And once those holograms are mastered, experimenters can follow
Iovine's instructions for more advanced spilt-beam, color, and stereographic holography. 208p 110 illus. 7 x 10
Item #: B5
$19.95
The Laser Guidebook This book is written to help end-users quickly and easily choose the laser best suited to their needs. It is
designed for ease of use and to explain the operation and characteristics of different types of lasers. Although there is some coverage
of internal physics, the strong emphasis is on practical characteristics of lasers such as output power, wavelength, cooling and types
of devices commercially available. The Second Edition includes all-new chapters on x-ray lasers, free-electron lasers, semiconductor
lasers (used in CD players), and fiber lasers, as well as complete updates to all First Edition chapters. Author: Jeff Hecht 512p 100
illus. 6 x 9
Item #: B6
$44.95
The Holography Handbook - Making holograms the Easy Way. New revised addition. Describes in exact detail how anyone can setup their own studio and make their own holograms. Easy step-by-step instructions and hundreds of illustrations will appeal to beginners. Perfect for high school and college students. Advanced techniques and theoretical information are included for more experienced students. Especially designed for those on a budget who want to build their own components. Off the shelf equipment suppliers
are listed for those with greater resources. Also includes a glossary, index, bibliography, and a hologram! 408p
Item #: B3
$32.50
Holography Market Place- 7th edition The Holography Market Place (HMP) is the first and only sourcebook and directory of the
holography industry. HMP includes more than 1200 names and addresses of equipment suppliers, educational programs, hologram
buyers and sellers, holographic artists & consultants. The text includes several examples of state-of-the-art holograms, chapters
explaining popular types of holograms, diagrams, and guides to buying lasers, recording materials and producing holograms for
commercial applications. Technical innovations in holographic optical elements (HOEs) and non-destructive testing (NDT) are outlined. Older editions of this book have become collectors items. 224 pages.
Item #: B4
$22.95
Homemade Laser Light Shows This pamphlet explains more than just the common simple techniques such as the mirror-glued-tospeaker, and spirograph. It covers many techniques rarely heard of such as “dripping oil”, “beams-galore”, and others. Using
commonly available items this pamphlet teaches how to make projection effects, lumia effects, and beam effects.
Item #: B7
$3.95
Laser Holography (Experiments You Can Do) Detailed instructions at the most elementary level on how to make 7 different kinds of
holograms at the lowest cost. Suitable for beginners. Written by- T.H. Jeong. 32 pages.
Item #: B2
$4.95
Midwest Laser Products
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
Page 17
Terms & Conditions
Payment
Visa or Master Card, Cashiers check, money order, personal check, or C.O.D.
C.O.D.’s
There is a $4.50 fee for C.O.D. Cash or certified funds are required upon delivery. Sorry, no foreign C.O.D.'s.
Shipping
Available to rated firms, government agencies and recognized schools and institutions.
P.O.’s
All orders are shipped via UPS or U.S. mail, unless otherwise requested.
Foreign
Orders
Call or FAX for a shipping quote. All foreign orders must be prepaid in U.S. funds. Canadian orders please
include an additional $10.00 to U.S. shipping cost, or call for a quote.
Guarantee
30-DAY MONEY BACK GUARANTEE. Customers wishing to return merchandise for a refund or credit must do
so within 30 days from the date of shipment. Returns must be shipped prepaid. A copy of the invoice is required to process your return. Please state the reason for the return and action to be taken. Merchandise
returned must be in original condition and be accompanied by all original packaging. Be sure to insure the return
package. No returns on books or plans.
Warranty
Midwest Laser Products warrants all merchandise against defects in material and workmanship. Warranty p e riods vary from item to item. A hyphenated number following the item number denotes the number of months in
the warranty period. (e.g. Item # HNM2-12 is warranted for 12 months.) If the item number does not show a
warranty period, and the warranty period is not mentioned in the product description, it is assumed to be 60 days.
Warning
Familiarize yourself with these components before attempting any assembly. Both high-voltage and laser energy
can be very dangerous! We take no responsibility for your actions. These lasers are sold as components only;
when assembled, they must incorporate the safety requirements set forth by the Center for Devices and Radiological Health of the Food and Drug Administration.
General Caution
Common sense dictates that one should avoid direct eye exposure to a laser beam or its reflection. Even
diffuse reflections can be dangerous at close proximity or from higher power lasers. Please call or write
the Center for Devices and Radiological Health for complete guidlines on laser safety.
C.D.R.H. Regulations
When assembled for use in the United States, lasers must conform to the safety regulations of the Center
for Devices and Radiological Health of the Food and Drug Administration. C.D.R.H. regulations classify
each laser by power, labeling, and mechanical requirements. Detailed information about these requirements is available by contacting:
Office of Compliance, HSZ 300, 2098 Gaither Road, Rockville, MD 20850 Phone: (301) 594-4654
High-Voltage Warning
All Helium-Neon laser power supplies emit high-voltage, typically 1500 - 3000 VDC with a 10-15 KV
trigger voltage. The output current of these supplies is typically 3 - 12 milliamps, which can be lethal. If
you are not familiar with high-voltage hazards, do not attempt utilizing these supplies before becoming
aware of the dangers.
Wanted: Surplus or Used Laser Equipment
Call or FAX for a quote.
See Our Web Page for Additional Items Not Featured in this Catalog
http://www.midwest-laser.com
Midwest Laser Products
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
Page 18
Midwest Laser Products
Order Form
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
SATISFACTION GUARANTEED
Terms & Conditions on opposite page.
Four convenient ways to order.
1) By Phone
2) By Fax
3) By Mail
4) By Email: mlp@midwest-laser.com
Date ________________
Name _________________________________________________________________________
Company or Care Of ____________________________________________________________
Shipping Address _______________________________________________________________
City ___________________________________ State _________
Zip __________________
Daytime PhoneNo. ______________________________________
[ ] Visa
[ ] Master Card
Credit Card Number ___________________________________ Expiration Date___________
Authorized Signature ____________________________________________
QTY.
ITEM #
Method of Payment
[ ] Credit Card
[ ] Check
[ ] Money Order
[ ] C.O.D. ($5.00 fee)
Thank You for Your Order!
DESCRIPTION
UNIT COST
TOTAL PRICE
Merchandise Total
Shipping & Handling Charges
U.S. only. Shipped via UPS ground or U.S. Postal
Service (insured). $7.50
Additional charges for items weighing over 15 lbs.,
next day air, two day , three day, and foreign orders.
Midwest Laser Products
IL Residents Add
6.5% Sales Tax
Shipping & Handling
Charges
TOTAL
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
Page 19
Ruby Laser Assembly
RUBY LASER ASSEMBLY These units are from military range-finders. The assembly
includes a 1/4” diameter x 3” (6.35 mm x 76.2 mm) ruby rod and linear flashlamp in a
cavity, reflectors and rotating Q-switch assembly. Each unit is tested and fuctional.
These components comprise a dangerous class IV laser. When made operational this
laser is capable of burning holes in many materials.
Item #: RBY2
$275.00
RUBY LASER ASSEMBLY WITH PULSE FORMING NETWORK This is the the same
assembly as above with the original pulse-forming network (used to trigger the flashlamp),
and collimator (for long-range use; Item #: A8). The pulse forming network includes the
trigger circuit, a 150uF oil-filled (No PCBs) capacitor, and a high-voltage transformer/rectifier. It requires a 1 to 1.5 KVdc source for charging, or build the charger using the HV
transformer/rectifier. Sample circuit included. Complete ducumentation is included. Because of high-voltage dangers, and the fact that these components comprise a dangerous
class IV laser, a hazardous equipment affidavit must be signed by a person at least 18 years
of age prior to ordering. Please call to receive further details.
Item #: RBY3
(Without collimator)
$375.00
Item #: RBY3WC (With collimator)
$399.00
DPSS Lasers
Our Diode Pumped Solid State Lasers offer compact size, low power consumption, and a long operating life. The laser uses an
IR diode laser to pump an Nd:YVO4 crystal. The Nd:YVO4 crystal generates a 1064nm output which is then frequency doubled
using a KTP crytal. The exit beam is 532nm (green). All models are CW with a TEM 00 beam and linear polarization. Line width
is less than 0.1nm. Optimum operating temperature: 20° - 30° C. Suitable for many applications. Custom designs, and
different power levels available. Call us to discuss your needs.
Divergence: <1mRad, Operating Current: <1200mA, Dimensions: 34mm diam. x 115mm
Item #: DPS10 (10 milliwatt)
Item #: DPS20 (20 milliwatt)
$ 925.00
$1,325.00
Divergence: <1.8mRad, Operating Current: <800mA, Dimensions: 15mm diam. x 60mm
DPSDR1
Item #: DPSB05 (3.5 to 4.9 millwatt)
$ 650.00
Power Supplies
Item #: DPSDR1
Item #: DPSDR2 (open circuit board, modulatable to 5 KHz)
Item #: DPSDR3 (open circuit board, 0 to 800mA)
$149.00
$155.00
$ 79.00
DPS10/20
DPSB05
Midwest Laser Products
98/99 Catalog #22
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
To:
Midwest Laser Products
P.O. Box 262, Frankfort, IL 60423
Phone: (815) 464-0085 FAX: (815) 464-0767
www.midwest-laser.com
Page 20