Deutsche Akkreditierungsstelle GmbH Annex to Accreditation Certificate D‐ZE‐11349‐01‐00 according to DIN EN ISO/IEC 17065:2013 Period of validity: 30.06.2015 to 09.05.2019 Date of issue:: 30.06.2015 Holder of certificate: ift Rosenheim GmbH Zertifizierungs‐ und Überwachungsstelle „ift‐Q‐Zert“ Theodor‐Gietl‐Straße 7‐9; 83026 Rosenheim Certifications of products in the fields: Certifications of products and services outside of the regulated sector for certification requirements on the basis of standards and/or normative provisions for construction products (such as windows, doors, gates, curtain walling, shutters, glass, glass products), accessories (such as panels, profiles, connector, coatings, adhesives, sealants, building hardware, hinges, locks), assembly / assembly products (such as in‐situ foam, sealing tapes), services (such as assembly, calculation, sustainability) Certification of construction products within the conformity procedure according to Building Regulation List and construction products with General Type Approval according to part II a of the directory for testing, surveillance/inspection and certification bodies according to State Building Code (e.g. construction products for the fire safety (reaction to fire, resistance to fire), products for resistance to fire and smoke control, safety glazing) Certification of construction products in accordance with Construction Products Regulation (EU) No. 305/2011 to defined harmonized conditions for the marketing of construction products (CPR) for systems of assessment and verification of constancy of performance (systems 1/1+) and of the factory production control (FPC) (system 2+) *) Within the entire scope of accreditation, the certification body is permitted, without being required to inform and obtain prior approval from DAkkS, to apply the Certification Scheme to new products and product requirements within the product groups indicated. In this context, the product requirements are based on standards and/or normative documents/ specifications. The certification requirements/ standards/ normative documents/ specifications listed in Clause 1 of the Annex are exemplary. This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/13
Annex to the Accreditation Certificate D‐ZE‐11349‐01 00 1.
Certifications of products and services outside of the regulated sector for certification requirements on the basis of standards and/or normative provisions * Certification system „ift‐certified“ for the product group of the building envelope: Construction products such as windows, doors, gates, curtain walling, shutters, glass products as well as their Accessories/constituent parts such as panels, profiles, connectors, coatings, adhesives, sealants, building hardware, hinges, locks, assembly products and the related services such as assembly, calculation and sustainability. QM201 2013‐06 General conditions for the Certification and Surveillance/Inspection of products and services Certification requirements: QM301 2012‐02 QM302 2005‐04 QM317 2013‐03 QM320 2008‐12 QM326 2007‐03 QM329 2009‐07 QM356 2011‐08 QM308 2008‐10 QM327 2007‐07 Certification requirements for burglar resistant components (pedestrian doorsets, windows, curtain walling, grilles and shutters) according to DIN EN 1627, DIN V ENV 1627, DIN 18106 Certification requirements for smoke control doors and shutters
according to DIN 18095‐1, DIN EN 1634‐3 Certification requirements for industrial and commercial doors and gates according to EN 13241‐1 Certification requirements for windows and external pedestrian doors according to EN 14351‐1 Certification requirements for internal pedestrian doors according to prEN 14351‐2 Certification requirements for curtain walling according to EN 13830 Certification requirements for powered pedestrian doors according to DIN 18650‐1 Certification requirements for thermal and solar protection of coated glass products according to DIN EN 1096‐1 and UEAtc‐
Guideline Certification requirements for insulating glass units according to EN 1279‐5 Period of validity: 30.06.2015 to 09.05.2019
Date of issue: 30.06.2015 ‐ Translation ‐
2/13
Annex to the Accreditation Certificate D‐ZE‐11349‐01 00 QM331 2012‐08 QM332 2006‐08 QM333 2006‐01 Certification requirements for shower enclosures according to EN 14428 Certification requirements for laminated glass and laminated safety glass (VSG) according to EN 14449 Certification requirements for thermally toughened soda lime silicate safety glass (ESG) according to EN 12150‐2 QM334 2009‐01 QM335 2006‐01 QM307 2009‐03 QM309 2002‐11 QM314 2005‐06 QM315 2003‐08 QM322 2005‐01 QM323 2009‐10 QM324 2005‐02 QM330 2006‐01 QM336 2006‐01 QM337 2007‐08 Certification requirements for heat soaked thermally toughened soda lime silicate safety glass (ESG‐H) according to EN 14179‐2 Certification requirements for heat strengthened soda lime silicate glass (TVG) according to EN 1863‐2 Certification requirements for panels for external pedestrian doors
Certification requirements for „Solid, finger‐jointed and laminated profiles for wood windows“ according to ift‐Guideline HO‐10/1 Certification requirements for additional burglar resistant products according to DIN 18104‐2 Certification requirements for security glazing and security panels Certification requirements for sealing of glazings with sealants according to EN 18545‐2, DIN EN ISO 11600 Certification requirements for metal profiles with thermal barrier according to EN 14024 Fire doors and shutters VKF
Certification requirements for glazing blocks made of plastics according to ift‐Guideline VE‐05/01 Certification requirements for external shutters Certification requirements for weldable corner connector according to ift‐Test Guidelines Period of validity: 30.06.2015 to 09.05.2019
Date of issue: 30.06.2015 ‐ Translation ‐
3/13
Annex to the Accreditation Certificate D‐ZE‐11349‐01 00 QM338 2008‐03 QM340 2010‐04 QM341 2010‐11 QM342 2009‐04 QM344 2009‐03 QM343 2009‐05 QM328 2008‐04 QM345 2009‐08 QM346 2009‐08 QM347 2009‐08 QM349 2009‐06 QM354 2010‐08 QM357 2011‐02 QM304 2012‐08 Certification requirements for gaskets and weatherstripping
according to EN 12365 for replacement of building components according to EN 14351‐1 Certification requirements for drainage systems and/or thresholds and/or metal ceilings for replacement of building components according to EN 14351‐1 Certification requirements for corner connections for wood windows Certification requirements for locks according to EN 12209 / DIN 18251‐1/2 and/or prEN 15685 / DIN 18251‐3 for replacement of building components according to EN 14351‐1 Certification requirements for blank external doors for replacement of building components according to EN 14351‐1 Certification requirements for hinges according to EN 1935 for replacement of building components according to EN 14351‐1 Tilt&Turn, Tilt‐First and Turn‐Only hardware in accordance with EN 13126‐8 for replacement of building components according to EN 14351‐1 Sliding folding hardware in accordance with EN 13126‐15 for replacement of building components according to EN 14351‐1 Lifting sliding hardware in accordance with EN 13126‐16 for replacement of building components according to EN 14351‐1 Parallel sliding tilting hardware according to EN 13126‐17 for replacement of building components according to EN 14351‐1 Certification requirements for bonding of SSG‐systems according to ETAG 002 Certification requirements for protective hardware according to EN 1906 and DIN 18257 Certification requirements for burglar resistant products for port installation according to DIN 18104‐1 Certification requirements for sealing tapes made of cellular plastics for the assembly of building components according to DIN 18542 Period of validity: 30.06.2015 to 09.05.2019
Date of issue: 30.06.2015 ‐ Translation ‐
4/13
Annex to the Accreditation Certificate D‐ZE‐11349‐01 00 QM305 2001‐10 QM352 2011‐08 QM311 2002‐08 QM339 2011‐05 QM355 2010‐10 2.
Certification requirements for polyurethane in‐situ foam for the
fixing of door frames of internal pedestrian doors made of timber and timber materials Certification requirements for the assembly of windows, external pedestrian doors and curtain walling Certification requirements for „ift‐certified specialised company for
mechanical security devices“ Certification requirements for „ift‐certified specialised company for the calculation of thermal transmittance “ Certification requirements for sustainability according to DIN ISO 14025 and EN 15804 Certifications according to State Building Code, Germany (according to notice of DIBt, Berlin) Certifications for construction products within the conformity procedure according to Building Regulation List (BRL) BRL A, Part 1, No.6.3 BRL A, Part 1, No.6.8 BRL A, Part 1, No.6.16 BRL A, Part 1, No.6.17 BRL A, Part 1, No.11.13
BRL A, Part 2, No.2.10.2
Approval Group 9/1 Approval Group 9/2 Approval Group 21/2 Mineral fiberboard as infill for fire resistant doors Locks ‐ mortise locks for fire resistant and smoke control doors
Spring hinge and construction hinge for fire resistant and smoke control doors Lever handle sets for fire resistant and smoke control doors
Heat soaked thermally toughened soda lime silicate safety glass
Building materials with requirements only for reaction to fire
Structural Glazing according to the "Guideline for the evidence of conformity for Structural Glazing" / QM310 (2001‐01) Mechanically fixed structural glazing (e.g. laminated glass with cast‐in‐place resin ‐ heat strengthened soda lime glass) Fire doors and shutters
Period of validity: 30.06.2015 to 09.05.2019
Date of issue: 30.06.2015 ‐ Translation ‐
5/13
Annex to the Accreditation Certificate D‐ZE‐11349‐01 00 Approval Group 21/5 Approval Group 21/7 Approval Group 21/8 Approval Group 21/9 Approval Group 22/3 Approval Group 22/4 Approval Group 22/9 Approval Group 22/10
Approval Group 23/1 Approval Group 2/11 Fire‐resistant assemblies
Fire‐resistant closures of access opening
Openable fabric curtain Fire doors and shutters (outdoor use)
G/F‐ fire resistant glazing
Penetration seals (pipe, cable) (Z‐19.15…)
Movable, self‐closing fire resistant glazing
Accessories for movable, self‐closing fire resistant glazing Non‐combustible or hardly inflammable building materials (DIN 4102‐1) Accessories (non regulated) for fire doors and shutters excluding single‐axis hinges Period of validity: 30.06.2015 to 09.05.2019
Date of issue: 30.06.2015 ‐ Translation ‐
6/13
Annex to the Accreditation Certificate D‐ZE‐11349‐01 00 3 Certification of construction products in accordance with Construction Products Regulation (EU) No. 305/2011 to defined harmonised conditions for the marketing of construction products (CPR) for systems of assessment and verification of constancy of performance (systems 1/1+) and of the factory production control (FPC) (system 2+) Commission Decision System 1) Technical Specification EN 12101‐1:2005/A1:2006
Smoke and heat control systems ‐ Part 1: Specification for smoke barriers 1996/577/EG 2002/592/EG Fire alarm/detection, fixed fire fighting, fire and smoke control and explosion suppression products 1 EN 12101‐2:2003
Smoke and heat control systems ‐ Part 2: Specification for natural smoke and heat exhaust ventilators prEN 12101‐9:2004
Smoke and heat control systems ‐ Part 9: Control panels EN 12101‐10:2005/AC:2007
Smoke and heat control systems ‐ Part 10: Power supplies 1996/580/EG Curtain walling 1 EN 13830:2003 Curtain walling ‐ Product standard ETAG 002‐1:1998
Notification of GUIDELINE FOR EUROPEAN TECHNICAL APPROVAL FOR Structural Sealant Glazing Kits (SSGK) ‐ Part 1: Supported and Unsupported Systems 1996/582/EG ETAG 002‐2:2002
Structural sealant glazing Notification of GUIDELINE FOR EUROPEAN TECHNICAL systems and metal anchors for 1, (2+) APPROVAL FOR Structural Sealant Glazing Kits (SSGK) ‐ Part 2: Coated Aluminium‐Systems concrete (mechanical fasteners) ETAG 002‐3:2003
Notification of GUIDELINE FOR EUROPEAN TECHNICAL APPROVAL FOR Structural Sealant Glazing Kits (SSGK) ‐ Part 3: Systems Incorporating Profiles with a Thermal Barrier 1997/462/EG Wood‐based panels 1 Period of validity: 30.06.2015 to 09.05.2019
Date of issue: 30.06.2015 EN 13986:2004
Wood‐based panels for use in construction ‐ Characteristics, evaluation of conformity and marking ‐ Translation ‐
7/13
Annex to the Accreditation Certificate D‐ZE‐11349‐01 00 Commission Decision 1998/213/EG Internal partition kits 1998/436/EC Roof coverings, rooflights, roof windows and ancillary products 1998/437/EC Internal and external wall and ceiling finishes 1998/600/EC Self‐supporting translucent roof kits ( except glass‐based kits) 1999/90/EC Membranes (2/3): ‐ water vapour control layers System 1) Technical Specification 1 ETAG 003:1998
Notification of GUIDELINE FOR EUROPEAN TECHNICAL APPROVAL FOR Internal partition kits for use as non‐
loadbearing walls EN 1873:2005
Prefabricated accessories for roofing ‐ Individual roof lights of plastics ‐ Product specification and test methods 1 1 1 1 EN 14963:2006
Roof coverings ‐ Continuous rooflights of plastics with or without upstands ‐ Classification, requirements and test methods EN 15102:2007+A1:2011
Decorative wallcoverings ‐ Roll and panel form products ETAG 010:2002
Notification of GUIDELINE FOR EUROPEAN TECHNICAL APPROVAL FOR Self‐supporting Translucent Roof Kits EN 13984:2004+A1:2006
Flexible sheets for waterproofing ‐ Plastic and rubber vapour control layers ‐ Definitions and characteristics EN 13162:2012
Thermal insulation products for buildings ‐ Factory made mineral wool (MW) products ‐ Specification 1999/91/EC Thermal insulating products 1 EN 13163:2012
Thermal insulation products for buildings ‐ Factory made products of expanded polystyrene (EPS) ‐ Specification EN 13164:2012
Thermal insulation products for buildings ‐ Factory made products of extruded polystyrene foam (XPS) – Specification Period of validity: 30.06.2015 to 09.05.2019
Date of issue: 30.06.2015 ‐ Translation ‐
8/13
Annex to the Accreditation Certificate D‐ZE‐11349‐01 00 Commission Decision System 1) Technical Specification EN 13165:2012
Thermal insulation products for buildings ‐ Factory made rigid polyurethane foam (PUR) products ‐ Specification EN 13166:2012
Thermal insulation products for buildings ‐ Factory made products of phenolic foam (PF) ‐ Specification 1999/91/EC Thermal insulating products EN 13167:2012
Thermal insulation products for buildings ‐ Factory made cellular glass (CG) products ‐ Specification 1 EN 13168:2012
Thermal insulation products for buildings ‐ Factory made wood wool (WW) products ‐ Specification EN 13169:2012
Thermal insulation products for buildings ‐ Factory made products of expanded perlite (EPB) ‐ Specification EN 13171:2012
Thermal insulation products for buildings ‐ Factory made wood fibre (WF) products ‐ Specification EN 14351‐1:2006+A1:2010
Windows and doors ‐ Product standard, performance characteristics ‐ Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics 1999/93/EC Doors, windows, shutters, blinds, gates and related building hardware 1 prEN 14351‐2:2009
Windows and doors ‐ Product standard, performance characteristics ‐ Part 2: Internal pedestrian doorsets without resistance to fire and /or smoke leakage characteristics EN 179:2008
Building hardware ‐ Emergency exit devices operated by a lever handle or push pad ‐ Requirements and test methods Period of validity: 30.06.2015 to 09.05.2019
Date of issue: 30.06.2015 ‐ Translation ‐
9/13
Annex to the Accreditation Certificate D‐ZE‐11349‐01 00 Commission Decision System 1) Technical Specification EN 1125:2008
Building hardware ‐ Panic exit devices operated by a horizontal bar, for use on escape routes ‐ Requirements and test methods EN 1935:2002/AC2003
Building hardware ‐ Single‐axis hinges ‐ Requirements and test methods EN 12209:2003/AC:2005
Building hardware ‐ Locks and latches ‐ Mechanically operated locks, latches and locking plates ‐ Requirements and test methods EN 1154:1996 / A1:2002 / AC:2006 Building hardware ‐ Controlled door closing devices ‐ Requirements and test methods 1999/93/EC Doors, windows, shutters, blinds, gates and related building hardware 1 EN 14846: 2011
Building hardware ‐ Locks and latches ‐ Electromechanically operated locks and striking plates ‐ Requirements and test methods EAD 020001‐00‐0405 Multi‐axis concealed hinge assemblies EN 16361:2013
Power operated pedestrian doors ‐ Product standard, performance characteristics ‐ Pedestrian doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics EN 16034:2014²)
Pedestrian doorsets, industrial, commercial, garage doors and windows ‐ Product standard, performance characteristics ‐ Fire resistance and/or smoke control characteristics 1999/455/EC Timber frame and log prefabricated building kits ‐ for use in construction works 1 Period of validity: 30.06.2015 to 09.05.2019
Date of issue: 30.06.2015 ETAG 007:2001
Notification of GUIDELINE FOR EUROPEAN TECHNICAL APPROVAL FOR Timber Frame Building Kits ‐ Translation ‐
10/13
Annex to the Accreditation Certificate D‐ZE‐11349‐01 00 Commission Decision System 1) Technical Specification EN 572‐9:2004
Glass in building ‐ Basic soda lime silicate glass products ‐ Part 9: Evaluation of conformity/Product standard EN 1096‐4:2004
Glass in building ‐ Coated glass ‐ Part 4: Evaluation of conformity/Product standard EN 1279‐5:2005+A2:2010
Glass in building ‐ Insulating glass units ‐ Part 5: Evaluation of conformity EN 1748‐1‐2:2004
Glass in building ‐ Special basic products ‐ Part 1‐2: Borosilicate glasses; Evaluation of conformity/Product standard 2000/245/EC Flat glass, profiled glass and glass block products EN 1748‐2‐2:2004
Glass in building ‐ Special basic products ‐ Glass ceramics ‐ Part 2‐2: Evaluation of conformity/Product standard 1 EN 1863‐2:2004
Glass in building ‐ Heat strengthened soda lime silicate glass ‐ Part 2: Evaluation of conformity/Product standard EN 12150‐2:2004
Glass in building ‐ Thermally toughened soda lime silicate safety glass ‐ Part 2: Evaluation of conformity/Product standard EN 12337‐2:2004
Glass in building ‐ Chemically strengthened soda lime silicate glass ‐ Part 2: Evaluation of conformity/Product standard EN 13024‐2:2004
Glass in building ‐ Thermally toughened borosilicate safety glass ‐ Part 2: Evaluation of conformity/Product standard EN 14178‐2:2004
Glass in building ‐ Basic alkaline earth silicate glass products ‐ Part 2: Evaluation of conformity/Product standard Period of validity: 30.06.2015 to 09.05.2019
Date of issue: 30.06.2015 ‐ Translation ‐
11/13
Annex to the Accreditation Certificate D‐ZE‐11349‐01 00 Commission Decision System 1) Technical Specification EN 14179‐2:2005
Glass in building ‐ Heat soaked thermally toughened soda lime silicate safety glass ‐ Part 2: Evaluation of conformity/Product standard 2000/245/EC Flat glass, profiled glass and glass block products 1 EN 14321‐2:2005
Glass in building ‐ Thermally toughened alkaline earth silicate safety glass ‐ Part 2: Evaluation of conformity/Product standard EN 14449:2005/AC:2005
Glass in building ‐ Laminated glass and laminated safety glass ‐ Evaluation of conformity/Product standard ETAG 016‐1:2003
Notification of GUIDELINE FOR EUROPEAN TECHNICAL APPROVAL of Self‐supporting Composite Lightweight Panels ‐ Part 1: General ETAG 016‐2:2003 Notification of GUIDELINE FOR EUROPEAN TECHNICAL APPROVAL of Self‐supporting Composite Lightweight Panels ‐ Part 2: Specific Aspects relating to Self‐
supporting Composite Lightweight Panels for Use in Roofs 2000/447/EC Prefabricated wood‐based load‐bearing stressed skin panels and self‐supporting composite lightweight panels 1 ETAG 016‐3:2005 Notification of GUIDELINE FOR EUROPEAN TECHNICAL APPROVAL of Self‐supporting Composite Lightweight Panels ‐ Part 3: Specific Aspects relating to Self‐
supporting Composite Lightweight Panels for Use in External Walls and Claddings ETAG 016‐4:2004 Notification of GUIDELINE FOR EUROPEAN TECHNICAL APPROVAL of Self‐supporting Composite Lightweight Panels ‐ Part 4: Specific Aspects relating to Self‐
supporting Composite Lightweight Panels for Use in Internal Walls and Ceilings ETAG 019 Notification of GUIDELINE FOR EUROPEAN TECHNICAL APPROVAL for Prefabricated Wood‐based Loadbearing Stressed Skin Panels Period of validity: 30.06.2015 to 09.05.2019
Date of issue: 30.06.2015 ‐ Translation ‐
12/13
Annex to the Accreditation Certificate D‐ZE‐11349‐01 00 Commission Decision System 1) Technical Specification EN 15651‐1:2012 Sealants for non‐structural use in joints in buildings and pedestrian walkways ‐ Part 1: Sealants for facade elements 2011/19/EC Sealants for non‐structural use in joints in buildings and pedestrian walkways 1 EN 15651‐2:2012 Sealants for non‐structural use in joints in buildings and pedestrian walkways ‐ Part 2: Sealants for glazing EN 15651‐3:2012 Sealants for non‐structural use in joints in buildings and pedestrian walkways ‐ Part 3: Sealants for sanitary joints EN 15651‐4:2012 Sealants for non‐structural use in joints in buildings and pedestrian walkways ‐ Part 4: Sealants for pedestrian walkways ETA Request No.06.05/01 Sealing kits, profiles and strips usually made of foamed polyurethane, plastic impregnated bitumen, or butyl 1 1) System of assessment and verification of constancy of performance Harmonisation is under way 2) The requirements of certification body for products and certification body for Factory Production Control in accordance with Article 43 of the Construction Products Regulation are fulfilled according to Annex V of the Construction Products Regulation. Tasks which are necessary for the certification and which are not performed by the accreditation certificate holder, are indicated on the list of subcontractors. Abbreviations used: DIN Deutsches Institut für Normung e. V. (German Standardisation Organisation)
EN European Standard ETA European Technical Approval
ETAG European Technical Approval Guideline (used as EAD)
ISO International Standardization Organization
QM‐XXX Certification requirements of “ift‐Q‐Zert“
PÜZ‐Stelle Prüf‐, Überwachungs‐ und Zertifizierungsstelle nach Landesbauordnung, Deutschland
(Testing, surveillance/inspection and certification body according to Building State Code, Germany) Period of validity: 30.06.2015 to 09.05.2019
Date of issue: 30.06.2015 ‐ Translation ‐
13/13