Bussmann®
High Speed Fuses
Ferrule Style
FWP 690V/700V (IEC/UL)
Interrupting Rating: 200kA RMS Symmetrical.
Agency Information: UL Recognized, 700V, Std. 248-13 &
CSA Component Acceptance
Watts loss provided at rated current.
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact
Bussmann Application Engineering at 636-527-1270 for more information.
Electrical Characteristics
Ordering Information
I2t (A2 SEC)
Rated Current
RMS-Amps
Watts
Loss
Part Number
370
4.6
FWP-20A22F
10
0.450
60
560
5.6
FWP-25A22F
10
0.450
32
95
850
7.0
FWP-32A22F
10
0.450
22 ≈ 58 mm
40
185
1350
8.5
FWP-40A22F
10
0.450
(‡Ω•∑ )
50
155
1120
9.5
FWP-50A22F
10
0.450
63
310
2700
11
FWP-63A22F
10
0.450
80
620
5100
13.5
FWP-80A22F
10
0.450
100
1250
10000
16
FWP-100A22F
10
0.450
Size
Pre-arc
Clearing
at 660V
20
34
25
Carton Qty.
Carton Weight (Kg)
500Vdc UL Recognition: Interrupting Rating = 50kA
Fuse Block: J70100 - (pole) CR Data Sheet: 1211
Data Sheet: 720026
FWK 750V
Size
5-60A
Electrical Characteristics
Rated
I2t (A2S)
Current
Clearing
RMS-Amps
Pre-arc
at 750 VDC
20 ≈ 127mm
(⁄‹Ω¡§∑)
25 ≈ 146mm
(1∑)
5
8
10
15
20
25
30
35
40
50
60
8.5
50
95
100
125
400
800
1300
1600
3100
5900
16
100
200
240
315
1100
2600
4300
5300
12000
24000
Interrupting rating 45kA RMS symmetrical.
750Vdc rating for 5 through 60A (Time constant = 10-15 mS).
Ordering Information
Watts
Loss
Part
Number
—
—
—
—
—
—
—
—
—
—
—
FWK-5A20F
FWK-8A20F
FWK-10A20F
FWK-15A20F
FWK-20A20F
FWK-25A20F
FWK-30A20F
FWK-35A25F
FWK-40A25F
FWK-50A25F
FWK-60A25F
Dimensions
Carton
Qty.
Carton
Weight
(kg)
Figure
Number
10
0.95
Fig. 1
10
1.65
Fig. 2
1 kg = 2.2 lbs.
1 lb = 0.45 kg
Data Sheet: 720039
154
For complete specification data, call Bussmann Information Fax ~ 636.527.1450
Bussmann
®
Ferrule
FWP 660V/700V (IEC/U.L.)
Size
Electrical Characteristics
I2t (A2S)
Rated
Current
Clearing
RMS-Amps
Pre-arc
at 660V
1-50A
®
Ordering Information
1
—
—
2
—
—
3
—
—
4
—
—
5
1.6
11
6
—
—
14 ≈ 51mm
10
3.6
22
(·Ω¡§∑)
15
10
75
20
26
180
25
44
320
30
58
450
32
68
600
40
84
750
50
200
1800
n Interrupting rating 200kA RMS Symmetrical.
n Watts loss provided at rated current.
n (700 Vdc/Interrupting rating 50kA) U.L. Recognition.
n CSA Component Acceptance: 5 - 30A.
Watts
Loss
Part
Number
Carton
Qty.
Carton
Weight
(kg)
—
—
—
—
1.5
—
4
5.5
6
7
9
7.6
8
9
FWP-1A14F
FWP-2A14F
FWP-3A14F
FWP-4A14F
FWP-5A14F
FWP-6A14F
FWP-10A14F
FWP-15A14F
FWP-20A14F
FWP-25A14F
FWP-30A14F
FWP-32A14F
FWP-40A14F
FWP-50A14F
10
0.225
Dimensions
Curves
Figure
Number
BIF #
Fig. 1
35785307
1 kg = 2.2 lbs.
1 lb = 0.45 kg
R
Dimensions
Fig. 1: 1-50 Amp Range
50.8
(2.000")
14.3
(0.563")
15.5
(0.610")
Dimension in mm.
1mm = 0.0394∑
1∑ = 25.4mm
Electrical Characteristics
Total Clearing I2t
The total clearing I2t at rated voltage and
at power factor of 15% are given in the
electrical characteristics. For other voltages, the clearing I2t is found by multiplying by correction factor, K , given as
a function of applied working voltage,
E g , (RMS).
1.4
1.2
1.0
0.9
0.8
0.7
0.6
0.5
0.4
1.4
1.2
103
9
8
7
6
K
Power Losses
Watts loss at rated current is given in
the electrical characteristics. The curve
allows the calculation of the power
losses at load currents lower than the
rated current . The correction factor, K p ,
is given as a function of the RMS load
current, Ib , in % of the rated current .
1.0
Kp
0.8
UL
0.6
0.5
0.4
0.3
5
1)
0.2
4
2)
0.3
200
Arc Voltage
This curve gives the peak arc voltage,
U L , which may appear across the fuse
during its operation as a function of the
applied working voltage, E g , (RMS) at a
power factor of 15%.
Eg
Eg
3
300
400
500
600
700
200
300
400
500
600
700
0.1
30 40 50
Ib
60
70
80 90 100%
1) 5-30 Amp Range
2) 32-50 Amp Range
7-18-01
SB01191
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann
Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly
present comprehensive product data and provide technical information that will help the end user with design
applications. Bussmann reserves the right, without notice, to change design or construction of any products and
to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without
notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested
by the user in all possible applications.
Form No.
Page 1 of 1
BIF Doc #720025