ACTIVE DELAY LINES(DIP 14-PIN TYPE)
Built-in TTL, total delay time:20 to 250ns
ADL series
FEATURES
• Waveform shaping circuits are not required for the built-in TTL
IC.
• Integration into a dual-inline package achieves a compact size
only 5.08mm in height.
• These delay lines are transfer molded using high-performance
resins.
• They can be used with automated inserters.
MAXIMUM RATINGS
Power supply voltage
Input voltage
Vcc
Vin
Operating
Storage
Temperature range
7V
–0.5 to +5.5V
0 to +70°C
–55 to +125°C
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
7.8max.
19.56max.
Vcc
OUT1 OUT3 OUT5
12
10
8
3min.
0.5
5.08max.
14
0.25 ±0.05
1
8.4±0.5
2.54
IN
4
6
7
OUT2 OUT4 GND
15.24
Weight: 2g max.
Dimensions in mm
Tolerance: ±0.25
ELECTRICAL CHARACTERISTICS
Part No.
ADL-020SH
ADL-025SH
ADL-050SH
ADL-060SH
ADL-075SH
ADL-100SH
ADL-125SH
ADL-150SH
ADL-200SH
ADL-250SH
Total delay time
Td(ns)
20±2
25±3
50±3
60±3
75±5%
100±5%
125±5%
150±5%
200±5%
250±5%
Delay time between
each tap td(ns)
4±2
5±2
10±2
12±3
15±3
20±3
25±3
30±3
40±3
50±3
Rise time
(ns)max.
4
4
4
4
4
4
4
4
4
4
Repeat cycle T=Td×30
• Measuring conditions
Power supply voltage Vcc: 5±0.1V/Ambient temperature: 25±1°C/No load between each tap
∗
Specifications which provide more details for the proper and safe use of the described product are available upon request.
All specifications are subject to change without notice.
Minimum input pulse width∗
(ns)min.
8
10
20
24
30
40
50
60
80
100
ACTIVE DELAY LINES(DIP 14-PIN TYPE)
Built-in TTL, total delay time:20 to 250ns
ADL series
INPUT/OUTPUT CHARACTERISTICS
MEASURING CONDITIONS
Input voltage Vi
Pulse width conversion Pw
Repeat cycle T
Input rise time Tri
Power supply voltage VCC
Ambient temperature Ta
3.2V
Td(Total delay time)×3
Pw×10 [Duty: 10%]
5ns max.
5±0.1V
25±1°C
WAVEFORMS
tri
tfi
Vi
2.4V
1.5V
0.75V
0V
Item
Power supply
voltage VCC
Input voltage
(H level) VIH
Input voltage
(L level) VIL
Output voltage
(H level) VOH
Output voltage
(L level) VOL
Pw
T
VOH
2.4V
1.5V
0.75V
Td
VOL
0V
tro
Vi : Input voltage
Td : Total delay time
Pw : Pulse width conversion
tri : Input rise time
tfi : Input fall time
tro
tfo
VOL
VOH
tfo
: Output rise time
: Output fall time
: Output voltage (L level)
: Output voltage (H level)
Input current
(H level) IIH
Input current
(L level) IIL
Power supply
current ICCL
Measuring
conditions
VCC=4.75V
VIH=2V
IOH=–1mA
VCC=4.75V
VIL=0.8V
IOL=20mA
VCC=5.25V
VI=2.7V
VCC=5.25V
VI=0.5V
VCC=5.25V
VIL=0V
Standard value
Minimum Nominal
4.75V
5V
Maximum
5.25V
2V
—
—
—
—
0.8V
2.7V
3.4V
—
—
—
0.5V
—
—
50µA
—
—
–2mA
—
47mA
65mA
OUTPUT LOAD CONDITIONS
Logic 1 output
Logic 0 output
20TTL load/tap [IOH/IIH=1mA/50µA=20]
10TTL load/tap [IOH/IIL=20mA/2mA=10]
MEASURING CIRCUITS
Oscilloscope
Pulse generator
OUT
TRIG
GND
Vcc
IN
OUT
CH TRIG
GND
2595980601
Specifications which provide more details for the proper and safe use of the described product are available upon request.
All specifications are subject to change without notice.