2 SERIES
2RP-AD-2
2RP-AD-2
FORMERLY DL22ZP
RECESSED LED DOWNLIGHT (IC, NON-IC, REMODEL)
ROUND PINHOLE APERTURE ADJUSTABLE WET LOCATION
DOWNLIGHT TRIM
ASpecial Features
BEffects Devices
Sealed frosted glass lens included; adjustable
yoke allows secure placement of up to 2 effects
devices.
Stainless steel trim plate; sealed aperture and integral silicone gasket prevent water intrusion; die-cast professional baffle minimizes aperture glare; hot-aim adjustment
from below; up to 45° tilt; 357° internal rotation; removable magnetic faceplate conceals all mechanisms.
Available Tilt
Ceiling Thickness
CTrim Plate
Engineered ball plunger retention in ceiling
mounting collar accessory, accommodates varying ceiling thicknesses and ensures snug fit
of trim against ceiling.
.15” (3.8mm) return; install as flange overlay.
45°
39°
20°
6°
≤ .75” (19mm)
≤ 1.25” (32mm)
≤ 1.75” (44mm)
≤ 2.5” (64mm)
Ceiling Thickness/Tilt chart references single lens application and abbreviated ceiling thickness. Consult factory for comprehensive
charts and when using two effect lenses.
CONSTRUCTION LED
Utilizes Xicato XTM remote phosphor LED.
Trim: 304 marine grade stainless steel trim plate; steel and aluminum; extruded
DIMMING PROTOCOL
aluminum heat-sink; painted finishes are
Analog 0-10 and Triac dim to nominal 10% lm
DRetention
granulated powder coat; optional chrome and
plated finishes.
Trim Adaptor: High impact composite and
stainless steel.
Housing: Steel and aluminum.
output; Lutron dims to nominal 1% lm output;
eldoLED dims to nominal 1/10 of 1%.
LISTING
TUV/CTUV listed to UL1598. IP64 rated.
WARRANTY
Five year warranty on LED lamp module and
driver. One year warranty on all other Lucifer
Lighting provided system components.
Consult website for full warranty terms and
conditions.
Lumen Package
80X-07B
80X-10B
80X-13B
80X-16B
80X-21B
95X-07B
95X-10B
95X-13B
95X-21B
80X-13C
95X-13C
Power Consumption
6.9 watts
10.2 watts
14.6 watts
16.5 watts
23.6 watts
9.2 watts
13.6 watts
19.5 watts
27.8 watts
15.6 watts
24.3 watts
LED Source lm/w
104 lm/w
95 lm/w
89 lm/w
120 lm/w
111 lm/w
78 lm/w
71 lm/w
67 lm/w
96 lm/w
83 lm/w
54 lm/w
Delivered Output
287 lm
384 lm
518 lm
631 lm
837 lm
287 lm
384 lm
518 lm
837 lm
Pending
Pending
Fixture lm/w
42 lm/w
38 lm/w
36 lm/w
38 lm/w
36 lm/w
31 lm/w
28 lm/w
27 lm/w
30 lm/w
Pending
Pending
NOTE: Results with 40° faceted optic.
TRIM ADAPTOR
E DOWNLIGHT TRIM ADAPTOR
Included with trim and required for installation. Installed after ceiling is complete. Requires 3-¾” (95mm) cutout for flange overlay
application using IC or non-IC housing and
3-5/8” (93mm) hole cutout for flange overlay
remodel application.
HOUSING/ MOUNTING
Do not install in environments where ambient temperatures exceed 40­­°C. Transformer compartment and all splice connections may be
serviced from room side. Hanger bars included with housings and mounting trays.
F NON-IC MOUNTING TRAY
GTETHERED POWER SUPPLY/ REMODEL
IC HOUSINGS
• For non-IC ceilings.
• Metal conduit protected wiring and quick-
connect conduit plug between fixture and power supply on tray/ junction box assembly.
• Hanger bars may be fitted to short or long side of tray and may be field cut/ narrowed.
Minimum 1/2” (13mm) setback from combus
tible materials on all sides and top of tray and downlight fixture assembly.
Minimum 3” (76mm) setback from polycell spray foam insulation having max R-Value of 40 on all sides and top of tray and downlight fixture assembly.
• UL2043 listed for non-IC or remodel ceilings.
• Mounts without conventional housing using
down light trim adaptor.
• Tethered power supply/ junction box with metal conduit protected wiring and quick-connect
plug between fixture and power supply.
Minimum 6.63” (168mm) radius setback of combustible materials from fixture centerline and 0.50” (13mm) clearance from top of trim.
Minimum 3” (76mm) clearance from combus
tible materials and surfaces of power supply/
junction box if not situated within above noted radius from fixture centerline.
Minimum 3” (76mm) clearance from polycell spray foam insulation materials (any type) and top of trim.
• For IC, Airtight, CCEA ceilings.
• Chicago Plenum & ASTM E283 Airtight rated
• H IC1 housing for 80X-07B/10B/13B/10C/13C and 95X-07B/10B/13B/10C configurations.
• I IC2 housing for 80X-16B configurations.
• J IC3 housing for 80X-21B configuration.
No setback from polycell spray foam insulation having max R-Value of 60 on all sides and top of housing.
page 1
luciferlighting.com
[070415]
©2015 Lucifer Lighting Company
As part of its policy of continuous research and product
development, the company reserves the right to change
or withdraw specifications without prior notice.
3750 IH35 North
San Antonio, Texas 78219
[ PH] +1-210-227-7329
[FAX] +1-210-227-4967
2RP-AD-2
2 SERIES
2RP-AD-2
FORMERLY DL22ZP
RECESSED LED DOWNLIGHT (IC, NON-IC, REMODEL)
ROUND PINHOLE APERTURE ADJUSTABLE WET LOCATION
ORDERING INFORMATION
Trim
SOURCE LUMENS
07B
10B
13B
16B
21B
(Adaptor included)
CRI/MODULE
80X
95X
80CRI Xicato
95CRI Xicato
700lm
1000lm
1300lm
1600lm1
2100lm2
OPTIC
10C 1000lm Spot
13C 1300lm Spot
1
2
40° Faceted
60° Smooth
3
4
15° Spot
25° Spot
CEILING THICKNESS
INSTALL TYPE
I
N
IC 2
NIC or Remodel
1
2
3
4
.5” - .75”
.75” - 1.25”
1.25” - 2”
2” - 3”
2RP-AD-2
TRIM PLATE COLOR
WH White
BK Black
MG Metallic Gray
PR Primer
AB Architectural PB Polished Bronze
Oil-Rubbed SS Brushed Stainless Bronze Plate
IG Industrial Gray
MB Matte Oil-Rubbed Bronze Plate
CH Chrome
CF Custom Finish
COLOR TEMPERATURE
27
30
2700K
3000K
35
40
SOURCE LUMENS
07B
10B
13B
16B
21B
Housing
CRI/MODULE
FIXTURE FLANGE
2F
80X
95X
Flange Overlay
DH
80CRI Xicato
95CRI Xicato
700lm
1000lm
1300lm
1600lm1
2100lm2
10C 1000lm Spot
13C 1300lm Spot
3500K
4000K
INPUT VOLTAGE
1
120V 60Hz
POWER SUPPLY
TR
L2
Triac 3
Lutron Forward Phase 2-Wire
U
120-277V
50Hz/60Hz
L3 Lutron A-Series
EcoSystem/3 Wire
LH Lutron H-Series
EcoSystem; Fade to
Black
AN
ND
EA
ED
RMT Remote
Leave Blank Here; specify PS-RMT in next section
Analog
Non-Dimming
eldoLED Analog
eldoLED DALI
2F
INSTALLATION TYPE
NC
IC
CEILING THICKNESS
No Insulation Contact
Insulation Contact 2
A .5”
B .625”
C .75”
G 1.26”
K 1.75”
M 2.01”
P 2.375”
S 2.75”
H 1.375”
L 1.875”
N 2.125”
Q 2.5”
T 2.875”
I 1.5”
M 2”
O 2.25”
R 2.625”
U 3”
J 1.625”
Housing collar will ship preset from factory and may be adjusted on site through thickness ranges depicted by groupings shown.
Universal Remodel/ Remote
APPLICATION TYPE
RMD
RMT 4
Remodel
Remote
C .76”
D .875”
E 1”
F 1.125”
G 1.25”
SOURCE LUMENS
CRI/MODULE
80X
95X
07B
10B
13B
16B
21B
80CRI Xicato
95CRI Xicato
INPUT VOLTAGE
700lm
1000lm
1300lm
1600lm1
2100lm2
1
120V 60Hz
U
120-277V
50Hz/60Hz
10C 1000lm Spot
13C 1300lm Spot
POWER SUPPLY
TR
L2
Triac 3
Lutron Forward Phase 2-Wire
L3 Lutron A-Series
EcoSystem/3 Wire
LH Lutron H-Series
EcoSystem; Fade to
Black
AN
ND
EA
ED
Analog
Non-Dimming
eldoLED Analog
eldoLED DALI
PS
EMERGENCY LIGHTING
During disruption of main power,
emergency battery inverter provides
temporary power supply to fixture.
Select based on system power of
specified fixture, or voltage needs.
ACCESSORIES
4
EMB-S-20/25-120/277-LEDX
Accessory kit provides for conduit connection
to NIC trim from remote power supply.
DLA-RMT-AK
1
2
Remote accessory kit
1600lm not available for 95X
IC not available for 95X-21B, 95X-13C
20/25 watt max capacity, 120 or 277 VAC 60Hz
ADDITIONAL EFFECTS DEVICES
REMOTE POWER SUPPLY
3
4
AGL-2
CGL-2
FGL-2
HCL-2
Amber Glass Lens
Clear Glass Lens
Frosted Glass Lens
Honeycomb Louver
LSL-2 Linear Spread Lens
SGL-2 Spread Lens
WTL-2 Warm Tone Lens
EMB-S-100-120-LEDX
100 watt max capacity, 120 VAC 60Hz
EMB-S-250-277-LEDX
250 watt max capacity, 277 VAC 60Hz
Triac not available for 80X-07B, 80X-16B, 80X-21B, 80X-10C, 95X-07B, 95X-21B, 95X-10C
PS-RMT that will be used in remote fixture applications requires selection of DLA-RMT-AK
page 2
luciferlighting.com
[070415]
©2015 Lucifer Lighting Company
As part of its policy of continuous research and product
development, the company reserves the right to change
or withdraw specifications without prior notice.
3750 IH35 North
San Antonio, Texas 78219
[ PH] +1-210-227-7329
[FAX] +1-210-227-4967
2 SERIES
2RP-AD-2
2RP-AD-2
FORMERLY DL22ZP
RECESSED LED DOWNLIGHT (IC, NON-IC, REMODEL)
ROUND PINHOLE APERTURE ADJUSTABLE WET LOCATION
DIMENSIONS/ DRAWINGS
DOWNLIGHT FIXTURE
**
* 3/4” (19mm)
DOWNLIGHT TRIM ADAPTOR
Taller heat-sink
used for these
source lumens
E
+ 1.1” (28mm)
95X-21B
95X-13C
4.9” (125mm)
95X-10C
Ø3.6” (91mm)
D
C
Ø1.8”
(45mm)
Ø4.4” (112mm)
* Allow for additional 3/4” (19mm) clearance above the fixture.
A
NON-IC MOUNTING TRAY
F
Ø3.9” (100mm)
.6” (14mm)
B
NON-IC TETHERED POWER
SUPPLY/ REMODEL
G
5.15” (131mm) Fixture + *clearance in 1/2” ceiling
**Add taller heat-sink height if applicable
(example)
3.2” (82mm)
2”
(51mm)
(aperture
centerline) 4.2” (106mm)
6.6” (168mm)
3.2”
(81mm)
7.6” (192mm)
IC HOUSINGS Housing used depends on specified lumen package.
IC1 STANDARD WATTAGE
IC2 INTERMEDIATE WATTAGE
(aperture centerline)
7.6” (193mm)
6.1” (155mm)
(aperture centerline)
9.3” (236mm)
7.2” (184mm)
H
9” (229mm)
I
17.1”
(434mm)
9.9” (252mm)
IC3 MAXIMUM WATTAGE
(aperture centerline)
7.6” (193mm)
J
19.2”
(488mm)
27.1” (688mm)
10” (254mm)
14” (355mm)
page 3
luciferlighting.com
[070415]
©2015 Lucifer Lighting Company
As part of its policy of continuous research and product
development, the company reserves the right to change
or withdraw specifications without prior notice.
3750 IH35 North
San Antonio, Texas 78219
[ PH] +1-210-227-7329
[FAX] +1-210-227-4967
2 SERIES
2RP-AD-2
2RP-AD-2
FORMERLY DL22ZP
RECESSED LED DOWNLIGHT (IC, NON-IC, REMODEL)
ROUND PINHOLE APERTURE ADJUSTABLE WET LOCATION
LUTRON PRODUCTS COMPATIBILITY
Measured Light Output Range with all listed is 100% - 1%.
Power supply UL3
Fixtures Per Control
Product Family
120V Part No.
277V Part No.
120V
277V
NTF-10-
NTF-10-277-
1 - 41
1 - 44
NovaT®
NTF-103P-
NTF-103P-277-
1 - 20
1 - 33
NF-10-
NF-10-277-
1 - 41
1 - 44
Nova®
NF-103P-
NF-103P-277-
1 - 20
1 - 33
-Vareo®VF-10---1 - 20
Skylark®
SF-10P-
SF-12P-277-
1 - 20
1 - 33
SF-103P-
SF-12P-277-3
1 - 20
1 - 33
DVF-103P-
DVF-103P-277-
1 - 20
1 - 33
Diva®
DVSCF-103P-
DVSCF-103P-277- 1 - 20
1 - 33
Ariadni®
AYF-103P-
AYF-103P-277-
1 - 20
1 - 44
VTF-6A-
1 - 15
1 - 33
Vierti®
Maestro®
MAF-6AM-
MAF-6AM-277-
1 - 15
1 - 33
MSCF-6AM-
MSCF-6AM-277-
1 - 15
1 - 33
1 - 15
1 - 33
Maestro Wireless® MRF2-F6AN-DV-
RadioTouch®
RTA-RX-F-
1 - 41
1 - 88
SPSF-6A-
SPSF-6A-277-
1 - 15
1 - 33
Spacer System®
SPSF-6AM-
SPSF-6AM-277-
1 - 15
1 - 33
Lyneo® Lx
LXF-103PL-
LXF-103PL-277-
1 - 20
1 - 33
RRD-F6AN-DV-
1 - 15
1 - 33
RadioRA® 2
HomeWorks® QS
HQRD-F6AN-DV
1 - 15
1 - 33
Interfaces
PHPM-3F
PHPM-3F-DV 1 - 41
1 - 88
GRX-FDBI-16A
1 - 41
1 - 88
PowPak™ RMJ-ECO32-DV-B32 per EcoSystem link
with Ecosystem
63 per EcoSystem link
Energi Savr Node™ QSN-1ECO-S, QSN-2ECO-S
with EcoSystem
GRAFIK Eye® QS QSG-_P120
64 per EcoSystem link
with EcoSystem
Quantum®Various64 per EcoSystem link
Power supply 1L2
Fixtures Per Control
Product Family
Part No.
(120V Only)
NTLV-600-CPN0199 1 - 8
NovaT®
MRF2-6ND-120
1-8
Maestro Wireless®
RadioRA®2 1000W
RRD-10ND
1 - 13
RadioRA 2 adaptive
RRD-6NA
1-8
dimmer
RadioRA 600W
RA-6ND
1-8
RadioRA 1000W
RA-10ND
1 - 13
HQRD-6ND
1-8
HomeWorks® QS
600W (LED)
HomeWorks QS
HQRD-10ND
1 - 13
1000W (LED)
HomeWorks QS
HQRD-6NA
1-8
adaptive dimmer
HomeWorks QS WPM (LED) HQRJ-WPM-6D-120 1 - 10 (per output)
HomeWorks 600W dimmer HRD-6ND
1-8
HomeWorks 1000W dimmer HWD-10ND, HRD-10ND 1 - 13
HomeWorks WPM
HWI-WPM-6D-120
1 - 10 (per output)
GRAFIK EYE® QS
QSGR-, QSGRJ-
1 - 10 (per output)
(fluorescent)
GRX-3100, GRX-3500 1 - 10 (per output)
GRAFIK EYE 3000
(fluorescent)
RPM-4U module, (LCP, HW-RPM-4U-120,
1 - 26 (per output)
HomeWorks, GRAFIK
LP-RPM-4U-120
Systems, Quantum®)
RPM-4A module, (LCP, HW-RPM-4A-120,
1 - 13 (per output)
HomeWorks, GRAFIK
LP-RPM-4A-120
Systems, Quantum) (LED)
GP panels (LCP,
Various
1 - 26
HomeWorks, GRAFIK
Systems, Quantum
Stanza®
SZ-6ND
1-8
page 4
luciferlighting.com
[070415]
©2015 Lucifer Lighting Company
As part of its policy of continuous research and product
development, the company reserves the right to change
or withdraw specifications without prior notice.
3750 IH35 North
San Antonio, Texas 78219
[ PH] +1-210-227-7329
[FAX] +1-210-227-4967