RXM
Dimensions
Polar Char t
0
90.0
85.0
6”
0.0
45.0
90.0
80.0
108
75.0
70.0
216
65.0
60.0
323
55.0
431
6”
50.0
45.0
539
RXM
4’
1-lamp T5HO
Baffle
Fixture Efficiency: 36.9%
40.0
647
35.0
755
862
30.0
6.25” t-bar-to-t-bar
0.0
58
RECESSED
DIRECT
T5
5.0
10.0
15.0
T8
20.0
25.0
MR 16
RXM
RECESSED BOX
Construction
22GA steel.
Project
Type
Quantity
E- R XM
Finish:
S
W
B
O
Dimension
Individual fixtures - Luminaires are available as individual 4’
and 8’ nominal lengths.
Joined fixtures - Luminaires are available in 12’, 16’, 20’ or 24’
lengths in multiples of 4’ or 8’ joined fixtures, as per factory.
Factory includes special through-wire endcaps per joint
and quick-connect harnesses. Consult factory for other row
lengths.
Silver Metallic
Satin White
Satin Black
Other stock powdercoat color (specify RAL# - consult factory for quote)
Dimension:
4
8
R12
R16
R20
R24
Mounting
T-Bar - Available for the following t-bar ceilings: 9/16” or 15/16”
standard flat or 9/16” slot.
Nominal 4’ long x 5-3/4” wide
Nominal 8’ long x 5-3/4” wide
Nominal 12’ long x 5-3/4” wide - joined fixtures (4’ + 8’)
Nominal 16’ long x 5-3/4” wide - joined fixtures (8’ + 8’)
Nominal 20’ long x 5-3/4” wide - joined fixtures (8’ + 4’ + 8’)
Nominal 24’ long x 5-3/4” wide - joined fixtures (8’ + 8’ + 8’)
Lamping:
Shielding
Blade baffle - Designed to control downlight illumination, for
maximum cut-off and glare reduction. Satin white.
1
2
3
Opal acrylic - Creates soft illumination from below (65%
transmissive).
(1) lamp in cross section
(2) lamps in cross section
(3) lamps in cross section
Ballast:
LexEfx™ - Circular, perforated, screen-printed pattern on opal
acrylic (60% transmissive).
A12 prismatic - Prismatic A12 pattern acrylic flat lens.
MR16 Accents
Indicate number of 6” MR16 modules per individual fixture or
row part number. ie. H4 = 4 modules. Each module adds 6”
to fixture/row length. Submittals are required. Indicate MR16
locations in drawing for each individual fixture or row. Lamps
not included; use encapsulated 35w or 37w MR16 lamps. MR16
modules are multi-circuited.
S5
H5
DS
DH
Standard T5
High output T5HO
Dimming standard T5 (specify type/voltage)
Dimming high output T5HO (specify type/voltage)
S
L
H
PS
PL
PH
D
Instant start - Standard T8
Instant start - Low output T8
Instant start - High output T8
Program start - Standard T8
Program start - Low output T8
Program start - High output T8
Dimming T8 (specify type/voltage)
Shielding:
Ballast
T5/T5HO - Universal 120-227V, low profile electronic, high
power factor, program start, sound rating A, inherent thermal
protection, UL listed Class P, <10% THD.
SB
O
L
PR
T8 - Universal 120-227V, low profile electronic, inherent
thermal protection, <10% THD. Specify low, standard or highoutput T8 ballast. Instant start is factory standard, specify
program start in nomenclature if required.
Satin white blade baffle
Opal acrylic lens
LexEfx™ lens
A12 prismatic lens
Voltage:
U
H
1
2
3
4
1B
2B
Dimming or emergency ballast: specify manufacturer, model/
series & voltage.
Finish
Electrostatically applied post powder coat finish. Silver, satin
white or satin black. Consult factory for other RAL color.
Recessed
Distribution
Direct.
Universal 120V - 277V (factory standard)
Universal 347V - 480V
120V
277V
347V
480V
Emergency ballast 120V
Emergency ballast 277V
Reflector:
Listing
UL/CUL. Damp location.
E
W
Enhanced aluminum 95% reflective
White aluminum 90%+ reflective
Mounting:
9F
9S
1F
9/16” flat t-bar
9/16” slot t-bar
15/16” flat t-bar
Options:
3728 Maritime Way Oceanside, CA 92056
760.727.7675 | www.alumen8e.com
V.8.2013
F
M
N
CP
H__
In-line fusing
Multi-circuit wiring
New York City Code 20GA housing
Chicago Plenum Code housing
MR16 module, indicate number of modules per fixture after the “H”.
Submittals required. Indicate module locations in drawing. Each module
adds 6” to fixture length. 35w or 37w IR only.
59