Certificate US09/74334
The management system of
J.M. Huber Corporation
907 Revolution Street,
Havre De Grace, MD, 21078, United States
has been assessed and certified as meeting the requirements of
ISO 9001:2008
For the following activities
Design, manufacture, and supply of synthetic inorganic silica,
silicates, and specialty products.
Further clarifications regarding the scope of this certificate and the applicability of
ISO 9001:2008 requirements may be obtained by consulting the organization
This certificate is valid from 10 September 2015 until 10 September 2018
and remains valid subject to satisfactory surveillance audits.
Recertification audit due a minimum of 60 days before the expiration date.
Issue 4 : 11 September 2015. Certified since September 2009
This is a multi-site certification.
Additional site details are listed on subsequent pages.
Authorized by
John Woodman
Senior Vice President SSC, North America
SGS Systems & Services Certification, a Division of SGS North America, Inc.
201 Route 17 North, Rutherford, NJ 07070, USA
t (201) 508-3000 f (201) 935-4555 www.us.sgs.com
This certificate remains the property of SGS and shall be returned upon request
Page 1 of 2
This document is issued by the Company subject to its General Conditions of Certification Services
accessible at www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitations of
liability, indemnification and jurisdictional issues established therein. The authenticity of this
document may be verified at http://www.sgs.com/en/Our-Company/Certified-ClientDirectories/Certified-Client-Directories.aspx. Any unauthorized alteration, forgery or falsification of
the content or appearance of this document is unlawful and offenders may be prosecuted to the
fullest extent of the law.
llll
Certificate US09/74334, continued
J.M. Huber Corporation
ISO 9001:2008
Issue 4 : 11 September 2015
Additional facilities
131 County Road 875, Etowah, TN, 37331, United States
Scope: Manufacture and supply of synthetic inorganic silica, silicates,
and specialty products.
This document is issued by the Company subject to its General Conditions of Certification Services
accessible at www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitations of
liability, indemnification and jurisdictional issues established therein. The authenticity of this
document may be verified at http://www.sgs.com/en/Our-Company/Certified-ClientDirectories/Certified-Client-Directories.aspx. Any unauthorized alteration, forgery or falsification of
the content or appearance of this document is unlawful and offenders may be prosecuted to the
fullest extent of the law.
Page 2 of 2
Certificate
No. 1351-08
Inspecta Sertifiointi Oy has granted this certificate
as proof that the quality system of
J. M. Huber Finland Oy
Hamina
complies with the requirements of the standard
ISO 9001:2008
Certification covers
Research and development, marketing, production and technical service
of sodium silicates and precipitated silicas and silicates.
Hamina, Taavetti.
The certificate is issued on 2013-11-19
(first issue 1991-04-22).
The certificate is valid until 2017-01-31.
Tomi Kasurinen, Managing Director
The certificate is valid on condition that the quality system of the organization
remains in compliance with the aforementioned standard and the General Regulations ABC 200.
The validity of the certificate can be checked on the Internet at www.inspecta.fi
ISO 9001
Inspecta Sertifiointi Oy
P.O. Box 113, Porkkalankatu 13 G
FI- 00181 Helsinki, Finland
Tel. + 358 10 521 600
Group headquarters: Inspecta Group Oy, Helsinki, Finland
Certificate
No. 1502-07
Inspecta Sertifiointi Oy has granted this certificate as proof that
the environmental management system of
J. M. Huber Finland Oy
Hamina
complies with the requirements of the standard
ISO 14001:2004
Certification covers
Research and development, marketing, production and technical service
of sodium silicates and precipitated silicas and silicates.
Hamina, Taavetti.
The certificate is issued on 2013-11-19
(first issue 1996-12-09).
The certificate is valid until 2017-01-31.
Tomi Kasurinen, Managing Director
The certificate is valid on condition that the environmental management system of the organization
remains in compliance with the aforementioned standard and the General Regulations ABC 200.
The validity of the certificate can be checked on the Internet at www.inspecta.fi
ISO 14001
Inspecta Sertifiointi Oy
P.O. Box 113, Porkkalankatu 13 G
FI-00181 Helsinki, Finland
Tel. +358 10 521 600
Group headquarters: Inspecta Group Oy, Helsinki, Finland
Certificate
No. 2371-06
Inspecta Sertifiointi Oy has granted this certificate
as proof that the quality system of
J. M. Huber Corporation
Hamina
complies with the requirements of the standard
ISO 9001:2008
Certification covers
European and Asian processes covering the overall business needs in the areas of
Management, Business Development, Material Management and Operation Support.
Production of sodium silicates and precipitated silicas and
silicates, their derivatives or combinations thereof.
Inspecta certificates 1351-07, 2149-05, 5877-01 Hamina, Taavetti, Oostende, Qingdao.
The certificate is issued on 2013-11-19
(first issue 2003-03-05).
The certificate is valid until 2017-01-31.
Tomi Kasurinen, Managing Director
The certificate is valid on condition that the quality system of the organization
remains in compliance with the aforementioned standard and the General Regulations ABC 200.
The validity of the certificate can be checked on the Internet at www.inspecta.fi
ISO 9001
Inspecta Sertifiointi Oy
P.O. Box 113, Porkkalankatu 13 G
FI- 00181 Helsinki, Finland
Tel. + 358 10 521 600
Group headquarters: Inspecta Group Oy, Helsinki, Finland
Certificate
No. 2149-06
Inspecta Sertifiointi Oy has granted this certificate
as proof that the quality system of
J.M.Huber Belgium BVBA
Oostende
complies with the requirements of the standard
ISO 9001:2008
Certification covers
Customer service, Production, Sales and Technical Customer service
of synthetic silicon dioxide pigments.
The certificate is issued on 2013-11-19
(first issue 2001-06-15).
The certificate is valid until 2017-01-31.
Tomi Kasurinen, Managing Director
The certificate is valid on condition that the quality system of the organization
remains in compliance with the aforementioned standard and the General Regulations ABC 200.
The validity of the certificate can be checked on the Internet at www.inspecta.fi
ISO 9001
Inspecta Sertifiointi Oy
P.O. Box 113, Porkkalankatu 13 G
FI- 00181 Helsinki, Finland
Tel. + 358 10 521 600
Group headquarters: Inspecta Group Oy, Helsinki, Finland
Certificate
No 5877-02
Inspecta Sertifiointi Oy has granted this certificate as proof that the quality system of
Huber Engineered Materials (Qingdao) Co., Ltd
Qingdao, China
complies with the requirements of the standard
ISO 9001:2008
Certification covers
Sales, Technical Service, Manufacturing and Supply of Silica.
Qingdao and Shanghai.
The certificate is issued on 2013-03-01
(first issue 2010-03-08).
The certificate is valid until 2016-03-08.
Anne Qvintus, Managing Director
The certificate is valid on condition that the quality system of the organization
remains in compliance with the aforementioned standard and the General Regulations ABC 200.
The validity of the certificate can be checked on the Internet at www.inspecta.fi
ISO 9001
Inspecta Sertifiointi Oy
P.O. Box 113, Porkkalankatu 13 G
FI- 00181 Helsinki, Finland
Tel. + 358 10 521 600
Fax. +358 10 521 6211
Group headquarters: Inspecta Group Oy, Helsinki, Finland