Product Specification, Revision 1.4
INPHENIX
Swept Light Source Desktop
Part Number: IPSWM13xx
Date: October 11, 2013
1. Configuration
IPSWM13xx
Wavelength
Tuning
Fiber pigtail
(FC/APC)
Booster
Optical
Output
Sync Circuit
FSYNC
SMA, Female
Figure 1 Configuration of Swept Light Source Desktop
2. General Conditions
Parameter
Power Supply Voltage
Power Consumption
Operating Temperature
Operating Humidity
Storage Temperature
Humidity
Min.
Typ.
Max.
Unit
100
10
30
-40
10
25
60
-
240
30
35
75
+70
100
VAC
W
C
%
C
%
1
All information contained herein is believed to be accurate and is subject to change without notification. No responsibility is assumed.
Please contact InPhenix for more information. InPhenix and the InPhenix logo are trademarks of InPhenix Inc. All rights are reserved.
Product Specification, Revision 1.4
INPHENIX
3. Optical and Electrical Characteristics
Specifications
Min.
Typ.
Max.
Items
Optical Characteristics
Center Wavelength (nm)
Wavelength Scanning Width
(-10dB cut off)
Average Optical Output
Power
Scan rate
1290
100
1300
-
1310
-
nm
nm
Notes
@25C. Connectors are
included.
10 ~ 30
mW
8 ~ 50
16 ~ 100
KHz One sweep period includes
KHz forward and backward
wavelength scans as shown
Figure 4
mm
-
Wavelength Repetition Rate
Coherence Length*
Optical Output type
Connector Type
Fiber Type
Electrical Characteristics
Scan Trigger (FSYNC)
VH for TTL input/output
VL for TTL input/output
Trigger Connector Type
Unit
5 ~ 20
FC Adaptor
FC/APC
SM-28 or equivalent
8 ~ 50
3.80
1.02
SMA connector, Female
KHz
V
V
-
* Coherence length is defined as the path length mismatch at a single sided displacement (from
match to mismatch point only) in Mach-Zehnder interferometer that results in the fringe visibility
being reduced by 6dB.
Part Number
IPSWM1301-317
IPSWM1302-317
IPSWM1303-317
IPSWM1304-317
IPSWM1301-318
IPSWM1302-318
IPSWM1303-318
IPSWM1304-318
Wavelength
Scan Range
(nm)
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
Scan
rate
(KHz)
8.0
16.0
25.0
50.0
8.0
16.0
25.0
50.0
Coherence
Length
(mm)
30.0
25.0
20.0
15.0
30.0
25.0
20.0
15.0
Output
Power
(mW)
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
K-Clock
Size
No
No
No
No
Yes
Yes
Yes
Yes
20517560mm
20517560mm
20517560mm
20517560mm
34090260mm
34090260mm
34090260mm
34090260mm
2
All information contained herein is believed to be accurate and is subject to change without notification. No responsibility is assumed.
Please contact InPhenix for more information. InPhenix and the InPhenix logo are trademarks of InPhenix Inc. All rights are reserved.
Product Specification, Revision 1.4
INPHENIX
4. Typical Spectra
Typical Spectrum
0
-5
Power(dBm)
-10
-15
-20
-25
-30
-35
1220
1270
1320
1370
Wavelength(nm)
Figure 2 Typical optical spectrum of 1310nm SWLS desktop
Sensitivity drop-off v.s Optical Path Difference
0
-5
Normalized(dB)
-10
-15
-20
-25
-30
-35
-40
-45
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
Optical Path Difference(mm)
Figure 3 Optical path difference dependent loss in signal sensitivity tested in Mach-Zehnder
interferometer. Coherence length is defined as the path length mismatch at a single sided
displacement (from match to mismatch point only) in Mach-Zehnder interferometer that results in
the fringe visibility being reduced by 6dB.
3
All information contained herein is believed to be accurate and is subject to change without notification. No responsibility is assumed.
Please contact InPhenix for more information. InPhenix and the InPhenix logo are trademarks of InPhenix Inc. All rights are reserved.
Product Specification, Revision 1.4
INPHENIX
Scan Period
Backward
Forward
Trigger: : FSYNC
(8kHz~50KHz)
Figure 4 Forward and backward spectra detected by photo diode in one swept period. Rise-Fall
edges of frame trigger signal (FSYNC) have fixed phase delay with respect to forward and
backward waves.
4
All information contained herein is believed to be accurate and is subject to change without notification. No responsibility is assumed.
Please contact InPhenix for more information. InPhenix and the InPhenix logo are trademarks of InPhenix Inc. All rights are reserved.
Product Specification, Revision 1.4
INPHENIX
5. Mechanical Specifications
Mechanical Drawing of 340mm (W) x 260mm (D) x 90mm (H) Case Type
Mechanical Drawing of 235mm (W) x 250mm (D) x 120mm (H) Case Type
5
All information contained herein is believed to be accurate and is subject to change without notification. No responsibility is assumed.
Please contact InPhenix for more information. InPhenix and the InPhenix logo are trademarks of InPhenix Inc. All rights are reserved.
Product Specification, Revision 1.4
INPHENIX
Mechanical Drawing of 205mm(W)60mm(H)175mm(D) Case Type
6
All information contained herein is believed to be accurate and is subject to change without notification. No responsibility is assumed.
Please contact InPhenix for more information. InPhenix and the InPhenix logo are trademarks of InPhenix Inc. All rights are reserved.
Product Specification, Revision 1.4
INPHENIX
6. Part Numbering Structure of Swept Light Source desktop
IPSWM
Model Number
08**: 800~890nm window
10**: 1010~1090nm window
13**: 1300~1390nm window
15**: 1500~1590nm window
Output Type
0-FC Adaptor
1-Pigtail fiber
Connector Type
0-No Connectors
3-FC/APC 4-FC/UPC
7-SC/APC 8-SC/UPC
Fiber Type
1-900 m SM Fiber
2-900 m PM Fiber
Case Size
6- 235250120mm case
7- 20517560mm case
8- 34026090mm case
9- 45030090mm case
Example: IPSWM13xx-0316: 1310nm-type Swept Light Source desktop in
235250120mm case with FC adaptor output, 900um SM fiber with FC/APC
connector.
7
All information contained herein is believed to be accurate and is subject to change without notification. No responsibility is assumed.
Please contact InPhenix for more information. InPhenix and the InPhenix logo are trademarks of InPhenix Inc. All rights are reserved.