Red•Dot®
Iberville®
Carlon®
Weatherproof Products
Table of Contents
FS Boxes and Covers ..........................................................B2–B12, B16
Dry-Tite® Universal Device Boxes and Covers....................................B13
Dry-Tite® Universal Standard Device Boxes.......................................B14
Universal Device Box Extensions .......................................................B15
Universal Device Mount Covers .................................................B17–B20
Nonmetallic Covers ...................................................................B21–B25
Metallic Covers .........................................................................B26–B27
Dry-Tite® Round Boxes and Covers ...........................................B28–B29
Round Boxes and Covers ..........................................................B30–B31
Outdoor Lampholders ...............................................................B32–B33
Outdoor Lampholders and Accessories..............................................B34
Outdoor Kits ......................................................................................B35
Outlet Boxes and Covers – Hazardous Locations .......................B36–B43
w w w.tnb.c a
B1
Red•Dot®
Iberville®
Carlon®
Weatherproof Products
FS Boxes and Covers
Applications:
• FS boxes are CSA approved for wet locations
• FS device boxes are installed in applications that require a rugged unit to accept wiring devices, switches, electronic components and
terminal blocks
• FS device boxes provide spacious accessible wiring chambers that are a convenient location to maintain or change a system; pull
conductors; make splices or branch conduits
• FS device boxes, when used with an appropriate cover, provide a raintight installation
• Both weatherproof and dry location covers are available
Features/Benefits:
• FS device boxes are sand casted or die casted using copper free (less than 0 copper content) aluminum alloys.
• FS device boxes incorporate external hub design that provides maximum wiring capacity
• FS device boxes have precision molded NPT threaded hubs allowing trouble-free field installation of rigid conduit
• FS device boxes are available in 1-7/8 in. and 2-5/8 in. depth
• Carlon® nonmetallic weatherproof FS covers are UV resistant, flame retardant and non-corrosive
Standard Materials:
• CIFS and CIFD device boxes: sand cast, copper free aluminum (less than 0.004 copper content)
• CIFSU: die cast, copper free aluminum (less than 0.004 copper content)
• FS covers: die cast aluminum, sand cast aluminum or nonmetallic
Compliances:
Compliances as noted on each page of the catalogue include:
• CSA Certified
• UL Listed
• cULus Listed
B2
w w w. t n b. c a
Iberville®
Weatherproof Products
FS Boxes and Covers
CIFDC
Cat. No.
Hub Size
(in.)
No. of
Gangs
No. of
Lugs
FDC Boxes - 2-5/8 in. Deep (Cast Aluminum)
2 x 1/2
CIFDC-1/2
2 x 3/4
1
2
CIFDC-3/4
2x1
CIFDC-1
A
(in.)
B
(in.)
4-5/16
2-13/16
2-5/8
E
(in.)
1-3/8
F
(in.)
G
(in.)
H
(in.)
Cu.
(in.)
2-7/8
2-3/8
F
(in.)
G
(in.)
H
(in.)
Cu.
(in.)
2-5/16
1-9/16
14.0
2-5/32
1-5/8
2-13/32
22.5
CIFS-2G / CIFS-3G
Hub Size
(in.)
No. of
Gangs
FS Boxes - 1-7/8 in. Deep (Cast Aluminum)
1 x 1/2
CIFS-1G-1/2
1
1 x 3/4
CIFS-1G-3/4
1x1
CIFS-1G-1
1 x 1/2
CIFS-2G-1/2
2
1 x 3/4
CIFS-2G-3/4
1x1
CIFS-2G-1
1 x 1/2
CIFS-3G-1/2
3
1 x 3/4
CIFS-3G-3/4
w w w.tnb.c a
15/16
D
(in.)
1-3/8
CIFS-1G
Cat. No.
C
(in.)
No. of
Lugs
A
(in.)
B
(in.)
C
(in.)
4-5/16
2-13/16
13/16
D
(in.)
E
(in.)
1-1/4
1-1/2
1-3/4
3
1-7/8
4-11/16
4-3/8
7/8
6-1/2
1-1/4
1-9/16
2-7/8
4-1/4
1-1/4
1-9/16
26.0
1-5/8
1-3/4
6-1/16
41.0
B3
Iberville®
Weatherproof Products
FS Boxes and Covers
CIFSC-1G
Cat. No.
CIFSC-2G / CIFSC-3G
Hub Size
(in.)
No. of
Gangs
No. of
Lugs
FSC Boxes - 1-7/8 in. Deep (Cast Aluminum)
2 x 1/2
CIFSC-1G-1/2
1
2 x 3/4
CIFSC-1G-3/4
2x1
CIFSC-1G-1
2 x 1/2
CIFSC-2G-1/2
2
2 x 3/4
CIFSC-2G-3/4
2x1
CIFSC-2G-1
2 x 3/4
3
CIFSC-3G-3/4
A
(in.)
B
(in.)
C
(in.)
D
(in.)
4-5/16
2-13/16
27/32
E
(in.)
F
(in.)
G
(in.)
H
(in.)
Cu.
(in.)
2-5/16
1-9/16
14.0
1-1/4
1-1/2
1-3/4
4
1-7/8
4-3/8
4-11/16
1-1/4
31/32
2-7/8
4-1/4
1-9/16
1-3/4
6-1/2
29/32
1-9/16
1-5/8
6-1/8
26.0
41.0
CIFSCC-1G
Cat. No.
Hub Size No. of
(in.)
Gangs
No. of
Lugs
FSCC Boxes - 1-7/8 in. Deep (Cast Aluminum)
CIFSCC-1G-1/2 3 x 1/2
1
3
CIFSCC-1G-3/4 3 x 3/4
A
(in.)
B
(in.)
C
(in.)
D
(in.)
4-5/16
2-13/16
27/32
1-7/8
B
(in.)
C
(in.)
D
(in.)
2-13/16
13/16
1-7/8
E
(in.)
1-1/4
1-1/2
F
(in.)
G
(in.)
H
(in.)
J
(in.)
Cu.
(in.)
2-7/8
2-5/16
1-9/16
1-9/16
14.0
1-3/4
14.0
F
(in.)
G
(in.)
H
(in.)
J
(in.)
Cu.
(in.)
2-7/8
2-5/16
1-9/16
–
14.0
CIFS-1G-1/2-HV / CIFS-1G-3/4-HV
Cat. No.
Hub Size No. of
(in.)
Gangs
No. of
Lugs
A
(in.)
E
(in.)
347 Volt FS Box Kits - 1-7/8 in. Deep (Cast Aluminum)
CIFS-1G-1/2-HV*
1 x 1/2
CIFS-1G-3/4-HV*
1 x 3/4
1
3
4-5/8
1-1/4
1-1/2
* For dry locations only
Includes Stamped Aluminum “CIFS-9HV” 347 Volt Covers (not raintight)
B4
w w w. t n b. c a
Iberville®
Weatherproof Products
FS Boxes and Covers
CIFSF (1 face)
Cat. No.
CIFST (2 faces)
Hub Size No. of
(in.)
Gangs
No. of
Lugs
A
(in.)
B
(in.)
C
(in.)
D
(in.)
E
(in.)
F
(in.)
G
(in.)
H
(in.)
J
(in.)
Cu.
(in.)
–
4-5/16
2-3/4
31/32
2-7/8
2-7/8
2-13/16
2-13/32
1-15/32
–
30.5
–
4-5/16
2-3/4
1-3/8
3-3/8
3
2-7/8
2-5/16
2-13/16
–
38.7
No. of
Lugs
A
(in.)
B
(in.)
C
(in.)
D
(in.)
E
(in.)
F
(in.)
G
(in.)
H
(in.)
K
(in.)
Cu.
(in.)
2-3/4
13/16
2-3/8
1-1/8
2-13/16
2-1/2
7/16
18.5
FSF Box - 3 in. Deep (Cast Aluminum)
CIFSF
2
–
FST Box - 3-5/8 in. Deep (Cast Aluminum)
CIFST
2
–
CIFSU
Hub Size
(in.)
Cat. No.
Universal FSU Boxes - 2-3/8 in. Deep (Cast Aluminum)
CIFSU-1/2
CIFSU-3/4
End
Bottom
2 x 1/2
1/2
2
2 x 3/4
3/4
2
4-5/16
1-29/32
2
Supplied with close up plugs
w w w.tnb.c a
B5
Red•Dot®
Weatherproof Products
FS Boxes and Covers
Single Gang
B
G
A
F
G
F A
K
CCD-FS
B
Cat. No.
A
(in.)
Description
Single Gang Horizontal Covers (Cast Aluminum)
Silver – box mount (Zinc)
CCD-FS
One GFCI receptacle – box mount
CFSH-G
One duplex receptacle – device mount
CWPDR
One duplex receptacle – box mount
CWPDR-FS
1-7/8
3-1/4
4-9/16
Description
Single Gang Vertical Covers (Cast Aluminum)
One duplex receptacle – box mount
CFSDR
One GFCI receptacle – box mount
CFSR-G
One GFCI receptacle – device mount
CWPV-G
L
(in.)
–
–
1-11/32
2-21/32
–
–
–
–
3-1/4
–
–
K F
A
L
CWPV-G
A
(in.)
B
(in.)
F
(in.)
4-9/16
2-13/16
3-1/4
G
(in.)
K
(in.)
L
(in.)
–
–
2-21/32
1-11/32
1-7/8
–
B
K
(in.)
1-7/8
F
L
G
CFSR-G
Cat. No.
B
F
A
F
G
G
CFSTF
Description
Single Gang Switch Covers (Cast Aluminum)
One plunger – box mount
CFST
One lever switch – box mount
CFSTF
B6
G
(in.)
B
K
A
G
CFSDR
Cat. No.
F
(in.)
B
F
A
CWPDR-FS
B
(in.)
2-13/16
B
A
B
CWPDR
CFSH-G
A
F
L
G
B
CFST
A
A
(in.)
B
(in.)
F
(in.)
G
(in.)
4-9/16
2-13/16
3-1/4
1-7/8
w w w. t n b. c a
Red•Dot®
Weatherproof Products
FS Boxes and Covers
Single Gang
B
B
F
CCB
A
F
A
G
G
CCB-FS
Cat. No.
CIFS-100G
CFSB
Description
Single Gang Blank Covers (Cast Aluminum)
Silver – device mount (stamped aluminum)
CCB
Silver – box mount (stamped aluminum)
CCB-FS
Blank – box mount
CFSB
Blank – box mount (gasket glued on cover)
CIFS-100G
A
(in.)
B
(in.)
4-9/16
2-13/16
4-3/8
2-14/16
F
(in.)
G
(in.)
3-9/32
–
3-1/4
1-7/8
B
F
A
CFSR Series
G
Cat. No.
Description
Single Gang Vertical Covers (Cast Aluminum)
CFSR-L
CFSR-S
Single receptacle – box mount
CFSR-X
CFSR-XL
CFSR-Y
Nominal
Size (in.)
Max. Device
Face Dia.
1-9/16
1.600
1-3/8
1.395
1-27/32
1.865
2-1/8
2.145
1-3/4
1.750
A
(in.)
B
(in.)
F
(in.)
G
(in.)
4-9/16
2-13/16
3-1/4
1-7/8
A
(in.)
B
(in.)
F
(in.)
G
(in.)
4-9/16
2-13/16
3-1/4
1-7/8
B
A
FS-GKV
Cat. No.
Single Gang Gasket
FS-GKV*
F
G
Description
Single Gang – box mount – Gasket
* CSA not applicable
w w w.tnb.c a
B7
Red•Dot®
Weatherproof Products
FS Boxes and Covers
Two Gang
G
B
B
K
B
K
F
A
A
A
2CWPDR
G
2CWPR-M
2CFST
B8
G
2CCB
G
Description
B
A
F
F
Cat. No.
Two Gang (Cast Aluminum)
2CWPDR
2CWPR-M
2CFSR-M
2CFST
2CCB
2CFSB
2CFSR-M
B
B
A
F
2CFSB
G
A
(in.)
B
(in.)
F
(in.)
Two duplex receptacles – device mount
–
Single receptacle – hole – device mount
2-3/8
Single receptacle – hole – box mount
4-9/16
F
A
4-5/8
G
G
(in.)
K
(in.)
1-13/16
2-1/4
3-3/4
3-3/4
Silver – device mount (stamped aluminum)
3-9/32
1-13/16
Blank Cover – box mount
3-3/4
3-3/4
Plunger style cover
–
–
w w w. t n b. c a
Iberville®
Weatherproof Products
FS Boxes and Covers
Dry-Tite® FS Covers Two Gang
G
B
B
A
F
A
B
B
F A
F
A
G
G
CIFS-42
Cat. No.
G
CIFS-69
CIFS-62
F
CIFS-92
Description
Two gang FS Covers* (Stamped Aluminum)
Blank – Two gang – box mount
CIFS-42*
Two duplex receptacles – box mount
CIFS-62*
One duplex receptacles, one toggle switch – box mount
CIFS-69*
Two toggle switches – box mount
CIFS-92*
A
(in.)
B
(in.)
F
(in.)
G
(in.)
4-5/8
4-9/16
3-1/4
3-11/16
* CIFS covers are CSA approved only
G
B
B
A
A
2CDR
Cat. No.
A
2CTS
Description
Two Gang (Cast Aluminum)
Two duplex receptacles – device mount
2CDR
Two switch – device mount
2CTS
One switch and one duplex receptacle – device mount
2CTDR
F
F
2CTDR
G
A
(in.)
B
(in.)
4-9/16
4-5/8
F
(in.)
–
2-3/8
G
(in.)
1-13/16
–
Dry-Tite® covers are approved for dry locations only
w w w.tnb.c a
B9
Iberville®
Weatherproof Products
FS Boxes and Covers
Dry-Tite® FS Covers Single Gang
B
B
A
A
F
G
CDR
F
G
CTS
Cat. No.
A
(in.)
B
(in.)
F
(in.)
G
(in.)
4-9/16
2-13/16
3-1/4
1-7/8
Description
Single Gang (Cast Aluminum)
One duplex receptacle – box mount
CDR
One switch receptacle – box mount
CTS
B
B
B
B
F
A
A
K
F
A
F
A
F
G
CIFS-4
G
CIFS-7 / CIFS-5
Cat. No.
CIFS-6
G
A
(in.)
Description
Single Gang FS Covers (Stamped Aluminum)
Blank – Single gang – box mount
CIFS-4
15A single receptacle – box mount
CIFS-5
One duplex receptacle – box mount
CIFS-6
20A single locking receptacle – box mount
CIFS-7
One toggle switch – box mount
CIFS-9
One toggle switch (347 Volt) – box mount
CIFS-9-HV
G
CIFS-9-HV
CIFS-9
B
(in.)
F
(in.)
G
(in.)
K
(in.)
–
1-13/16
4-9/16
2-13/16
3-1/4
1-7/8
–
1-19/32
–
–
B
F
A
G
CRL
Cat. No.
Description
Single Gang (Cast Aluminum)
CRL
Single receptacle – box mount
CRS
Nominal
Size
Max. Device
Face Dia.
1-9/16
1.600
1-3/8
1.395
A
(in.)
B
(in.)
F
(in.)
G
(in.)
4-9/16
2-13/16
3-1/4
1-7/8
Dry-Tite® covers are approved for dry locations only
B10
w w w. t n b. c a
Carlon®
Weatherproof Products
FS Boxes and Covers
Single Gang
C
B
A
D
F
E98G20N
E98SRCN-CAR
Cat. No.
E98G5FN-CAR
E98G60N-CAR
Description
Colour
Single Gang Vertical Covers (Nonmetallic)
For 15A or other single receptacles under 1.375 dia.
E98SRCN-CAR
For 20A or other single receptacles under 1.625 dia.
E98G20N
For 30A or other single receptacles under 1.750 dia.
E98G30N-CAR
For 50A or other single receptacles under 2.250 dia.
E98G5FN-CAR
G
A
(in.)
B
(in.)
C
(in.)
D
(in.)
F
(in.)
G
(in.)
3-1/4
1-57/64
1-25/64 ± 1/16
Grey
4-53/64
3-11/16
1-41/64 ± 1-23/32
53/64
1-49/64 ± 1-23/32
2-1/4 ± 1/16
C
B
A
F
E98GCBN
E98SSCN-CAR
E98GFCN-CAR
E98GDRN-CAR
Cat. No.
Description
G
Colour
A
(in.)
B
(in.)
C
(in.)
F
(in.)
G
(in.)
Grey
4-53/64
3-11/16
53/64
3-1/4
1-57/64
A
(in.)
B
(in.)
C
(in.)
F
(in.)
G
(in.)
4-3/4
3
31/32
4-5/8
2-7/8
–
3-9/32
1-57/64
Single Gang Vertical Covers (Nonmetallic)
Single Switch
E98SSCN-CAR
Duplex receptacle
E98GDRN-CAR
GFCI receptacle – Device opening dimensions: 2-5/8 H x 1-5/16 W
E98GFCN-CAR
B
C
B
G
ON
A
E98TSCN
OFF
F
A F
E980CN-CAR
G
Cat. No.
Description
Colour
Single Gang Vertical Covers (Nonmetallic)
Toggle Switch
E98TSCN
E980CN-CAR
Supplied with stainless steel mounting screws and gasket
E980CM-CAR
Grey
White
B
G
C
F-1
F1/2
A
E98DHGN-CAR
Cat. No.
E98GHGN-CAR
Description
Single Gang Horizontal Covers (Nonmetallic)
Duplex receptacle
E98DHGN-CAR
GFCI Horizontal
E98GHGN-CAR
w w w.tnb.c a
Colour
A
(in.)
B
(in.)
C
(in.)
F1
(in.)
F1/2
(in.)
G
(in.)
Grey
3-1/8
4-7/8
13/16
1-57/64
61/64
3-9/32
B11
Carlon®
Weatherproof Products
FS Boxes and Covers
Two Gang
B
G
A
B
F
A
F
G
E9G2SSN
E9G2DDN-CAR
B
G
A
C
B
G
D
F
F
A
E9G2DSN-CAR
Cat. No.
E9802CN-CAR
E9G2GTN-CAR
Description
Two Gang Covers (Nonmetallic)
Double Duplex
E9G2DDN-CAR
Double Toggle
E9G2SSN
Supplied with stainless steel mounting screws and gasket
E9802CN-CAR
Combination Toggle / GFCI
E9G2GTN-CAR
Combination Toggle / Duplex Receptacle
E9G2DSN-CAR
B12
Colour
Grey
A
(in.)
B
(in.)
C
(in.)
D
(in.)
4-27/34
4-27/34
–
–
3-17/64
–
–
4-55/64
–
–
3-17/64
1-53/64
55/64
4-55/64
F
(in.)
G
(in.)
3-17/64
3-9/16
w w w. t n b. c a
Red•Dot®
Weatherproof Products
Dry-Tite® Universal Device Boxes and Covers
Technical Specifications
Applications:
• Boxes and covers protect wiring devices, switches, electronic components and terminal blocks in dry, damp and wet locations
• Accessible wiring chamber provides a convenient location to maintain or change a system, pull conductors and make splices
• Junction box for branch conduits
• Covers suitable for use in wet locations with lids closed
• CCB and CCT series covers suitable for use in wet locations
Features/Benefits:
• Alloy A380 aluminum, certified zinc alloy, and stainless steel springs provide increased corrosion resistance
• Die cast construction and industrial design combine to produce a rugged protective enclosure
• Clean cover edges provide good gasket sealing
• Precision cast and machined surfaces permit safer wire pulling
• Clear cubic content markings
• Convenient mounting lugs for a variety of mounting methods
• Securely fastened mounting plates reduce costly call backs
Standard Materials:
• Boxes: Die cast aluminum alloy A380
• Cover Plates: Stamped aluminum alloy or certified die cast zinc alloy ZAMAK 3
• Cover Lids: Certified die cast zinc alloy ZAMAK 3
Compliances:
Compliances as noted on each page of the catalogue include:
• UL Listed
• Boxes: CSA Certified with factory installed ground screw.
• Covers: CSA Certified
Securely
fastened
mounting
plates
Corrosion
resistant metal
Clear marking
Precision
machined
threads
Stainless
steel springs
Clean cover edges
Ground screw
w w w.tnb.c a
B13
Red•Dot®
Weatherproof Products
Dry-Tite® Universal Standard Device Boxes
Single Gang
S100CN / S105CN / D1H3 / IH3
Cat. No.
IH4 / S101E
No. of
Hubs
Hub Size
(in.)
A
(in.)
S102CN / S107CN
B
(in.)
Single Gang Outlet Boxes - 2 in. Deep (Cast Aluminum)
S100CN
1/2
S100BRCN
S100WHCN
3
3/4
S105CN
1
DIH3-3-LM
IH3-1-LM
1/2
IH4-1-LM
4
3/4
4-9/16
2-13/16
IH4-2-LM
S101E
1/2
5
S102CN
3/4
S107CN
5
1/2
IH5S2-1
3/4
IH5S2-2
1/2
IH6S2-1
6
3/4
IH6S2-2
IHD3 Series
Cat. No.
C
(in.)
IH5S2 / IH6S2
D
(in.)
E
(in.)
F
(in.)
G
(in.)
H
(in.)
J
(in.)
–
Cu.
(in.)
17.3
17.0
17.3
2
5/8
3-13/16
3-1/2
3-1/4
17.0
1-7/8
1-1/2
17.3
17.0
IHD4 Series
No. of
Hubs
Hub Size
(in.)
A
(in.)
B
(in.)
Single Gang Outlet Boxes – 2-5/8 in. Deep (Cast Aluminum)
IHD3-1
1/2
IHD31GDC
3
3/4
IHD3-2
4-9/16
2-13/16
1
IHD3-3
1/2
IHD4-1
4
3/4
IHD4-2
C
(in.)
D
(in.)
E
(in.)
F
(in.)
G
(in.)
H
(in.)
3-13/16
3-1/2
3-1/4
1-7/8
J
(in.)
Cu.
(in.)
5/8
3/4
2-5/8
5/8
3/4
5/8
–
24.8
1-1/2
Mounting lugs and screws included in packaging
Raintight when used with appropriate Red Dot® covers
B14
w w w. t n b. c a
Red•Dot®
Weatherproof Products
Universal Device Box Extensions
B
B
F
F
F
A
F
A
A
A
B
B
C
IHE
Cat. No.
IHE4-1
C
No. of
Hubs
Hub Size
(in.)
A
(in.)
B
(in.)
Single Gang Extensions Ring (Cast Aluminum)
None
–
IHE
IHE4-1
IHEF2-1
IHEF2-2
IHEF6S2-1
IHEF6S2-2
Plug
w w w.tnb.c a
D
(in.)
2-13/16
1-3/8
D
IHE6S2
F
(in.)
–
J
J
(in.)
Cu.
(in.)
–
10.0
1-1/2
11.3
1/2
3-9/32
2
(1 plug)
3/4
4-1/2
3-1/2
1-7/8
7/8
–
–
1/2
6
(4 plugs)
21.3
1-1/2
3/4
LM
Cat. No.
Plugs and Lug Mounts
PLG-1RD
PLG-2RD
PLG-3RD
S603E
S603BRE
S603WHE
LM
C
(in.)
D
1
4-9/16
4
(4 plugs)
C
C
IHEF2
J
Colour
Size
(in.)
Description
1/2
Silver
3/4
Close-up plugs
1
Silver
Bronze
1/2
White
–
–
Close-up plugs
Bag/4
2 mounting lugs with screws
B15
Red•Dot®
Weatherproof Products
FS Boxes and Covers
Two Gang
S400CN/ 2IH3
2IH4
S401CN/ S402CN/ 2IH5-1
2IH5S2
2IH7
2IH7S2
2IHD5
3IHD7
Cat. No.
No. of Hub Size
Hubs
(in.)
A
(in.)
B
(in.)
C
(in.)
Two Gang Outlet Boxes – 2 in. Deep (Cast Aluminum)
1/2
S400CN
3
1/2
2IH3-1
3/4
2IH3-2
1/2
2IH4-1
4
3/4
2IH4-2
1/2
S401CN
3/4
S402CN
4-9/16
4-5/8
2-1/16
5
1/2
2IH5-1
1/2
2IH5S2-1
3/4
2IH5S2-2
1/2
2IH7-1
3/4
2IH7-2
7
1/2
2IH7S2-1
3/4
2IH7S2-2
Cat. No.
No. of Hub Size
Hubs
(in.)
Two Gang Outlet Boxes –
2IHD5-1
5
2IHD5-2
2IHD5-3*
Cat. No.
A
(in.)
B
(in.)
C
(in.)
D
(in.)
E
(in.)
F
(in.)
G
(in.)
H
(in.)
J
(in.)
K
(in.)
L
(in.)
M
(in.)
Cu.
(in.)
–
1-1/2
5/8
5
3-1/2
3-11/16
–
3-3/4
31.8
3-1/4
3-9/16
–
1-1/2
1-1/2
30.3
–
32.0
D
(in.)
E
(in.)
F
(in.)
G
(in.)
H
(in.)
J
(in.)
L
(in.)
M
(in.)
Cu.
(in.)
2-5/8 in. Deep (Cast Aluminum)
1/2
3/4
4-9/16
4-5/8
2-11/16
5/8
5
3-1/2
3-11/16
3-3/4
1-1/2
3-1/4
3-9/16
40.3
A
(in.)
B
(in.)
C
(in.)
D
(in.)
E
(in.)
F
(in.)
G
(in.)
H
(in.)
K
(in.)
L
(in.)
M
(in.)
Cu.
(in.)
1-3/16
6-13/16
3-1/2
3-1/4
5-5/8
1-1/2
3-1/4
3-9/16
54.8
1
No. of Hub Size
Hubs
(in.)
Three Gang Outlet Boxes - 2-5/8 in. Deep (Cast Aluminum)
3/4
3IHD7-2*
7
4-9/16
6-7/16
2-11/16
1
3IHD7-3*
* Not CSA approved
Raintight when used with appropriate Red Dot® covers
B16
w w w. t n b. c a
Red•Dot®
Weatherproof Products
Universal Device Mount Covers
Single Gang
B
B
G
B
A
A
A
G
S310
CCD / DCCD
S305
Cat. No.
CCS
A
(in.)
Description
B
(in.)
D
D
(in.)
G
(in.)
Single Gang Device Mount Covers – Horizontal (Zinc)
For duplex receptacle – Bronze
S310BRE
For duplex receptacle – Silver
S310E
For duplex receptacle – White
S310WHE
For duplex receptacle with Lock Option
CCD-L
DCCDSO
DCCDP
S305BRE
S305E
S305WHE
CCS
–
For duplex receptacle with Lock Option
Stay open – Silver
For duplex receptacle with Lock Option
Stay open – Plastic – Silver
For GFCI receptacle – Bronze
2-27/32
For GFCI receptacle – Silver
3-13/16
For GFCI receptacle – White
For single receptacle
2-13/16
1-1/2
2-3/8
B
B
S306 / CCGV-L
CCSV
Cat. No.
A
F
A
S309 / CCDV-L
–
4-9/16
Description
Single Gang Device Mount Covers – Vertical (Zinc)
For duplex receptacle – Bronze
S309BRE
For duplex receptacle – Silver
S309E
For duplex receptacle – White
S309WHE
For duplex receptacle with Lock Option
CCDV-L
For GFCI receptacle – Bronze
S306BRE
For GFCI receptacle – Silver
S306E
For GFCI receptacle – White
S306WHE
For GFCI receptacle with Lock Option
CCGV-L
For single receptacle
CCSV
D
A
(in.)
B
(in.)
4-9/16
2-13/16
D
(in.)
F
(in.)
–
–
1-1/2
2-3/8
B
A
Cat. No.
Description
Single Gang Device Mount Cover – Horizontal and Vertical (Zinc)
Flip-lid cover - silver for GFCI, single, duplex or switch configuration supplied with 2 adapters and 2 screws, lockable
CCU†
A
(in.)
B
(in.)
4-9/16
2-13/16
Raintight with cover closed and when used with appropriate Red Dot boxes
† Lock not included
®
w w w.tnb.c a
B17
Red•Dot®
Weatherproof Products
Universal Device Mount Covers
Single Gang
B
B
B
B
F
F2
A
A
S340E
CCMB
G
D
Cat. No.
CCPO
Single Gang Device Mount Covers (Zinc)
Blank Cover (Stamped aluminum) – Silver
S340E
Blank Cover (Stamped aluminum) – Bronze
S340BRE
Blank Cover (Stamped aluminum) – White
S340WHE
Cat. No.
Description
Single Gang Device Mount Covers (Zinc)
Motor Base Cover with 15A, 125V plug
CCMB
Power outlet cover for 30A and 50A receptacles Box Mount
CCPO
For switch packed with spacers
S321E
Switch cover with single pole switch 15A, 125V AC
CCT-1
CCT-1-20
SW20-2
CCK
Switch cover with single pole 20A switch,
120V, 277V AC
Switch cover with double pole 20A switch,
120V, 277V AC (all with spacers and screws)
S321E / CCT-1 / SW20-2
D
Description
A
F1 F2
A
A
(in.)
B
(in.)
F
(in.)
4-9/16
2-13/16
3-9/32
A
(in.)
B
(in.)
D
(in.)
2-3/8
4-9/16
1-35/64
4-9/16
2-13/16
2-5/32
F1
(in.)
-
3-9/32
F2
(in.)
G
(in.)
-
3-9/32
2-3/8
-
CCSK / S620E
Cat. No.
Description
Single Gang Gaskets
Neoprene Gasket
CCK
Neoprene Gasket
CCSK
Neoprene Gasket
S620E
B18
w w w. t n b. c a
Red•Dot®
Weatherproof Products
Universal Device Mount Covers
Two and Three Gang
B
F1
F2
A
S413E
A
2CCTG
B
Cat. No.
Description
Two and Three Gang Device Mount Covers (Zinc)
For two GFCI receptacles
S413E*
For switch and GFCI receptacle with spacers
2CCTG*
A
(in.)
B
(in.)
4-9/16
4-5/8
F1
(in.)
F2
(in.)
–
–
3-9/32
2-3/8
*Raintight with cover closed and when used with appropriate Red Dot® boxes
B
B
S440E
SP411-GWH
Cat. No.
F
A
F
G
G
3CCB
Description
Two and Three Gang Device Mount Covers (Stamped Aluminum)
Blank Cover, Two Gang
S440E
Blank Cover, Two Gang (Stamped Aluminum) - White
SP411-GWH
Blank Cover, Three Gang
3CCB
Cat. No.
Colour
Two Gang Covers (Zinc)
2CCU
Silver
2CCU-BR
Bronze
2CCU-WH
White
w w w.tnb.c a
A
A
(in.)
B
(in.)
F
(in.)
G
(in.)
4-9/16
4-5/8
3-9/32
1-13/16
4-1/2
6-3/8
3-1/4
5-5/8
4-9/16
4-5/8
3-9/32
1-13/16
Description
Flip-lid cover for GFCI, duplex or single switch configurations supplied with 4 adapters and 4 screws lockable
(lock not included)
A
(in.)
B
(in.)
4-9/16
4-5/8
B19
Red•Dot®
Weatherproof Products
Universal Device Mount Covers
Two Gang
D
D
A
A
B
S410E / 2CCD-L
A
F
B
2CCS
2CCSD
F
B
2CCSG
B
F F2
1
S420E
Cat. No.
A
2CCT-1
Description
A
(in.)
B
(in.)
D
(in.)
F
(in.)
-
-
F1
(in.)
F2
(in.)
-
-
2-3/8
3-9/32
Two Gang Device Mount Covers (Zinc)
For two duplex receptacles
S410E*
2CCD-L*
2CCS*
2CCSD*
2CCSD-L*
2CCSG*
S420E*
2CCT-1*
For two duplex receptacles
with Lock Option (lock not included)
For two single receptacles
For single and duplex receptacles
For single and duplex receptacles
with Lock Option (lock not included)
For single and GFCI receptacles
For two switches with spacers
Switch cover with two single pole switches
15A, 125V AC
4-9/16
4-5/8
1-31/64
2-3/8
-
-
*Raintight with cover closed and when used with appropriate Red Dot® boxes
B20
w w w. t n b. c a
Red•Dot®
Carlon®
Weatherproof Products
Nonmetallic Covers
While-In-Use Applications
Technical Specifications
While-In-Use covers keep out moisture and take the hassle and cost out of installation. Single or two-gang kits
accommodate various configurations, and some covers are designed with a method to secure using an external locking
device. Perfect for all outdoor outlets including landscape lighting, lawn equipment, pool/hot tub pumps, holiday lighting
and car play in heater blocks.
Applications:
• Protects receptacles and switches for single and two gang configurations in dry and wet locations while equipment is in use
• Prevents accidental equipment disconnects
• Deters theft and equipment removal (when locked)
Features/Benefits:
• Supplied in kit form covering most installation requirements
• Horizontal or vertical orientation
• Lockable cover design for added security
• High impact UV-resistant polycarbonate base construction
• Weatherproof, thermoplastic base configuration
• Accommodates most commonly used receptacles and switches
• Mounts to box or to device (all installation screws included)
• Device holes are keyed for easy installation in retrofit applications
• Nonmetallic, flame retardant
Standard Materials:
• Bases: polycarbonate
• Covers: thermoplastic or polycarbonate
Compliances:
Compliances as noted on each page of the catalogue include:
• CSA Certified
• UL Listed
• cUL Listed
w w w.tnb.c a
B21
Red•Dot®
Weatherproof Products
Nonmetallic Covers
While-In-Use
A
A
C
C
B
CKNM-NG
B
2CKNM-NG
*
*
*
*
*1-19/32 diameter fits up to 30A twist lock receptacle
*2-1/8 diameter
**1-19/32 diameter
CKNMW-NG
Cat. No.
**
CKNMG-NG
Description
Universal While-In-Use Covers (Nonmetallic)
Single Gang accommodates Duplex, GFCI, switch, single 1-19/32 horizontal or vertical receptacles – lockable
CKNM-NG
2CKNM-NG Two Gang accommodates Duplex, GFCI, switch, single 1-19/32 or 2-1/8 horizontal or vertical receptacles – lockable
CKNMW-NG Cover and base in white
CKNMG-NG Cover and base in grey
A
(in.)
B
(in.)
C
(in.)
5-1/2
2-3/4
4
5
2-3/8
5
5-1/2
2-3/4
4
5-1/2
2-3/4
4
A
CKRU-8
Cat. No.
CKRU-G8
B
C1
C2
Description
Universal Recessed Bodies (Nonmetallic)
Grey body with grey cover. Accommodates GFCI, Duplex, toggle switch and single 1-9/16 receptacle – lockable
CKRU-G8†
White body with white cover. Accommodates GFCI, Duplex, toggle switch and single 1-9/16 receptacle – lockable
CKRU-WH8†
Grey body with clear cover. Accommodates GFCI/Duplex, toggle switch and single 1-9/16 receptacle – lockable
CKRU-8†
CKNMW-NGD Cover and base in white
2CKNMG-NGD Cover and base in grey
Inserts
A
(in.)
B
(in.)
7-1/4
5
C1
(in.)
C2
(in.)
1-1/2 3-9/16
† Not CSA Certified
B22
w w w. t n b. c a
Carlon®
Weatherproof Products
Nonmetallic Covers
While-In-Use
B
G
F
A
E9UVCRN2
Inserts
D
Cat. No.
Description
Colour
Vertical Mount – Standard Covers – 2-41/64 in. Deep (Nonmetallic)
E9UVGRN2
Accommodates Toggle,
E9UVWRN2
Duplex or GFCI receptacles
E9UVCRN2
A
(in.)
B
(in.)
D
(in.)
F
(in.)
G
(in.)
6-1/2
3-25/64
2-21/64
4-3/32
2-9/32
A
(in.)
B
(in.)
D
(in.)
F
(in.)
G
(in.)
4-3/4
5-7/32
2-17/32
2-9/32
4-3/32
Grey
White
Clear
Lockable: drill a 7/32 hole on cover lug
B
G
F
A
D
E9UHGRN2
Cat. No.
Inserts
Description
Horizontal Mount – Standard Covers – 2-17/32 in. Deep (Nonmetallic)
E9UHGRN2
Accommodates GFCI or
E9UHWRN2
Duplex receptacles
E9UHCRN2
Colour
Grey
White
Clear
Lockable: drill a 7/32 hole on cover lug
w w w.tnb.c a
B23
Carlon®
Weatherproof Products
Nonmetallic Covers
While-In-Use
G
B
G
F
A
E9U2CRN2
Cat. No.
Inserts
D
Description
Dougle Gang – Standard Covers – 2-21/64 in. Deep (Nonmetallic)
E9U2GRN2
Accommodates double Duplex,
double GFCI, combination Duplex and Toggle or
E9U2WRN2
combination GFCI and Toggle receptacles
E9U2CRN2
Colour
A
(in.)
B
(in.)
D
(in.)
F
(in.)
G
(in.)
6-1/2
5-7/32
2-21/64
4-7/64
2-3/64
Grey
White
Clear
Lockable: drill a 7/32 hole on cover lug
B24
w w w. t n b. c a
Red•Dot®
Weatherproof Products
Metallic Covers
While-In-Use
Technical Specifications
Applications:
• Protects receptacles, switches, and plugs for single gang and two gang configurations in dry and wet locations
• Provides a lockable cover that complies with OSHA lockout/tagout requirements
• Prevents accidental equipment disconnects, reduces tampering, and deters theft and equipment removal
Features/Benefits:
• Alloy A360 copper-free (less than 0.004 copper content) aluminum provides increased corrosion resistance
• Die cast, metal construction provides long lasting durability
• NEMA 3R rating ensures protection against falling rain, sleet, and external ice formation when used with appropriate device boxes
• Clear UL and CSA markings speed approval by inspectors
• Wide range of cover depths and receptacle configurations accommodate almost every common plug and cord size
• Combination box or device mounting design provides flexibility in installation
Standard Materials:
• Covers and Plates: Die cast aluminum alloy A360
• Gaskets: Closed-cell foam
Standard Finish:
• Powder coated finish
Compliances:
Compliances as noted on each page of the catalogue include:
• CSA Certified
• UL Listed
Hinge
Cover
Plate
FS Mount
Device Mount
Padlock Eye
for 1/4 in. Shackle
w w w.tnb.c a
B25
Red•Dot®
Weatherproof Products
Metallic Covers
Duplex
GFCI
Cat. No.
Single Receptacle
Switch
Description
Single Gang Cover – 2-1/4 in. Internal Depth (Aluminum)
Small vertical cover universal code keeper accommodates duplex, GFCI, single receptacle and toggle switch – lockable.
CKSUV
Duplex
Duplex
Cat. No.
GFCI
GFCI
Single Receptacle
Single Receptacle
Switch
Switch
Description
Single Gang Cover – 3-1/4 in. Internal Depth (Aluminum)
Medium horizontal cover universal code keeper accommodates duplex, GFCI, single receptacle and toggle switch – lockable.
CKMU
Medium vertical cover universal code keeper accommodates duplex, GFCI, single receptacle and toggle switch – lockable.
CKMUV
B26
w w w. t n b. c a
Red•Dot®
Weatherproof Products
Metallic Covers
Single Receptacle
Cat. No.
Description
Single Gang Cover – 4-3/4 in. Internal Depth (Aluminum)
Large vertical cover – Box mount universal code keeper with adapter rings to accommodate 1-19/32 in. and 1-3/4 in. single receptacles – lockable
CKLSVU
Two duplex
receptacle
Single and
GFCI receptacle
Duplex and
GFCI recepacle
Toggle and
duplex receptacle
Two GFCI
receptacle
Toggle and
GFCI receptacle
Two single
receptacle
Toggle and single
receptacle
Single
and duplex
receptacle
Toggle and
single
receptacle
Cat. No.
Description
Two Gang Cover – 4-1/4 in. Internal Depth (Aluminum)
Regular cover universal code keeper accommodates various configurations – lockable
2CKU*
* Can be used to cover one receptacle with an oversized wall opening
w w w.tnb.c a
B27
Red•Dot®
Weatherproof Products
Dry-Tite® Round Boxes and Covers
Technical Specifications
Applications:
• Boxes and covers protect wiring devices, switches, electronic components and terminal blocks in dry, damp and wet locations
• Accessible wiring chamber provides a convenient location to maintain or change a system, pull conductors
and make splices
• Junction box for branch conduits
Features/Benefits:
• Alloy A380 aluminum, certified zinc alloy, and stainless steel springs provide increased corrosion resistance
• Die cast construction and industrial design combine to produce a rugged protective enclosure
• Clean cover edges provide good gasket sealing
• Precision cast and machined surfaces permit safer wire pulling
• Clear cubic content markings
• Convenient mounting lugs for a variety of mounting methods
• Securely fastened mounting plates reduce costly call backs
Standard Materials:
• Boxes: Die cast aluminum alloy A380
• Cover Plates: Stamped aluminum alloy
Compliances:
Compliances as noted on each page of the catalogue include:
• UL Listed
• Boxes: CSA Certified with factory installed ground screw
• Covers: CSA Certified
• Covers suitable for use in wet locations with lids closed
B28
w w w. t n b. c a
Red•Dot®
Weatherproof Products
Dry-Tite® Round Boxes and Covers
A
B
D
CIC-8444 / CIC-8448
CIC-8495
C
Hub Size (in.)
Cat. No.
Side
Bottom
No. of
Lugs
No. of
Plugs
Description
A
(in.)
B
(in.)
C
(in.)
D
(in.)
Cu.
(in.)
1-5/8
3-15/16
5
4-5/16
17.3
1-1/2
3-15/16
4-5/8
4-5/16
17.3
Weatherproof Junction Box Kits (Cast Aluminum)
4 X 1/2
4 X 1/2
CIC-8444
CIC-8446
CIC-8448
4 X 3/4
3 X 3/4
1/2
2
3X1
4X1
Outlet Box 4-1/2 Dia. (Cast Aluminum)
6 X 1/2
1/2
CIC-8495
1 X 1/2
Includes cover, gasket, plugs and mounting
screws
1 X 1/2
2
5 X 1/2
CIC-93
Cat. No.
Description
Weatherproof Round Cover – 4-3/16 in. Dia. (Stamped Aluminum)
CIC-93
w w w.tnb.c a
For 4 in. weatherproof round box.
Includes gasket and mounting screws
B29
Red•Dot®
Weatherproof Products
Round Boxes and Covers
S341E
SS-B
S-1-RD / S-12
DSS-1
Cat. No.
Outlet Covers – 4-1/8 in. Dia. (Cast Aluminum)
S341E
SS-B
S-1-RD
DSS-1
DSS-1-BR
DSS-1-WH
S-12*
S-3-RD
DSS-3
DSS-3-BR
DSS-3-WH
Y3PL
*
S-3-RD
DSS-3
Y3PL
S341
Hub Size
(in.)
No. of
Hubs
-
-
3/64
1
3/8
1/2
B
(in.)
4-1/8
3/4
1/2
A
(in.)
3
1-1/16
Not CSA Certified
A
S621E
Cat. No.
Universal Round Gasket
S621E*
*
B30
A
(in.)
4-3/16
Not CSA Certified
w w w. t n b. c a
Iberville®
Weatherproof Products
Round Boxes and Covers
S110CN / S-48 / DS47BR
Cat. No.
Hub Size
(in.)
No. of
Hubs
A
(in.)
Outlet Boxes – 4-1/8 in. Dia. (Cast Aluminum)
S110CN*
S110BRCN*
1/2
5
4-1/8
S110WHCN*
DS47BR*
3/4
S-48*
B
(in.)
1-5/8
C
(in.)
3/4
D
(in.)
E
(in.)
F
(in.)
G
(in.)
H
(in.)
5-9/16
4-15/16
3-1/2
3-1/8
1-1/4
7/8
Cu.
(in.)
16.0
17.0
SE-47 / SE-48
Hub Size
(in.)
Cat. No.
No. of
Hubs
Outlet Box Extension – 4-1/8 in. Dia. (Cast Aluminum)
1/2
SE-47*
4
3/4
SE-48*
A
(in.)
B
(in.)
C
(in.)
F
(in.)
G
(in.)
Cu.
(in.)
4-1/8
1-5/8
13/16
3-1/2
3-1/16
18.3
DS47B / DS48B
Cat. No.
Hub Size
(in.)
No. of
Hubs
A
(in.)
Outlet Box Kits – 4-1/8 in. Dia. (Cast Aluminum)
1/2
DS47B*
5
4-1/8
3/4
DS48B*
B
(in.)
C
(in.)
D
(in.)
E
(in.)
F
(in.)
G
(in.)
H
(in.)
Cu.
(in.)
2
7/8
5-9/16
4-15/16
3-1/2
3-1/8
1-1/4
17
*Raintight with cover closed and when used with appropriate Red Dot® boxes
See page B15 for close-up plugs.
w w w.tnb.c a
B31
Red•Dot®
Carlon®
Weatherproof Products
Outdoor Lampholders
Technical Specifications
Applications:
• Security and general outdoor lighting fixture for residential and commercial applications
• Accent lighting fixture for highlighting outdoor signs and architectural details
• Compact outdoor lighting fixture which can be mounted easily in most places and can be aimed in any direction
• Suitable for use in wet locations.
Features/Benefits:
• Clean lines and precision manufacturing result in a fixture which will enhance any application
• High-quality replaceable porcelain socket with high-temperature leads allow for easy field maintenance
• Positive locking mounting arm keeps fixture in aimed position to reduce costly callbacks
• Ground screw boss in arm
Standard Materials:
• Fixture: Certified die cast zinc alloy ZAMAK 3 (less than 0.004 copper content), or nonmetallic
• Gasket: Heat resistant composition or high-temperature silicone
• Socket: Center contact, porcelain, medium base
Compliances:
Compliances as noted on each page of the catalogue include:
• CSA Certified
• UL Listed
Heat resistant
gasket
Porcelain socket
• cUL Listed
Corrosion
resistant metal
Locking arm
Ground screw
B32
w w w. t n b. c a
Red•Dot®
Weatherproof Products
Outdoor Lampholders
Cat. No.
Finish
Wattage
Economy Style – Internal Gasket (Zinc)
L-80
DL-80
L-800
L-80
Silver
DL-80
Silver
For 75 to 150 Watt Par 38 and
R40 Lamps
Deep-Shielded Style – Internal Gasket (Zinc)
L-800
For 75 to 150 Watt Par 38 and
R40 Lamps
Silver
Utility Style – External Gasket (Zinc)
S500E
Silver
S500BRE
Bronze
S500WHE
White
For 75 to
150 Watt Par
38 and R40 Lamps
Double Economy Style Lampholders with Round Cover (Zinc)
S500E
S513E
Silver
S513BRE
Bronze
S513WHE
White
For up to
150 Watt Par
38 and R40 Lamps
S513E
B
C
LC-11
LC-21
LC-31
Cat. No.
A
D
Description
Lampholder Rectangular Covers (Zinc)
Lampholder cover with one 1/2 in. tapped hole
LC-11
Two 1/2 in. tapped holes
LC-21
Three 1/2 in. tapped holes
LC-31
Blank Outlet Cover (Stamped Aluminum)
5 in. round blank outlet cover with screws. Mounting holes are 3-1/2 in. on center.
Painted white
CCRB
B
F
A
LC-11
LC-31
F
LC-21
A
(in.)
B
(in.)
C
(in.)
D
(in.)
4-9/16
2-13/16
1-5/32
1
5
3-1/2
-
5/32
F
(in.)
F1
(in.)
-
-
3-9/32
-
-
-
D
B
A
CCRB
w w w.tnb.c a
B33
Carlon®
Weatherproof Products
Outdoor Lampholders and Accessories
Nonmetallic
C
US
LISTED
Cat. No.
P8001W-CAR
P8010W-CAR
Finish
Wattage
No-tool Lampholder with Gasket (Nonmetallic)
White
Accepts 150 watt max. or 300 watt (Incandescent only)
P8001W-CAR
Lampholder with Round Covers - Internal Gasket (Nonmetallic)
White
Accepts 150 watt max. or 300 watt (Incandescent only)
P8010W-CAR
White
Accepts 150 watt max. or 300 watt (Incandescent only)
P8060W-CAR
Lampholder with Rectangular Cover - Internal Gasket (Nonmetallic)
White
Accepts 150 watt max. or 300 watt (Incandescent only)
P8005W-CAR
C
US
LISTED
P8060W-CAR
P8005W-CAR
Cat. No.
Finish
Lampholder Round Cover (Nonmetallic)
P7801W-CAR
Lampholder Rectangual Cover (Nonmetallic)
P7901W-CAR
White
White
C
P7801W-CAR
P7901W-CAR
LISTED
Cat. No.
Finish
Hub Size
(in.)
No. of
Lug
A
(in.)
Lampholder with Round Covers - Internal Gasket (Nonmetallic)
Grey
CE365D-CTN
5 x 1/2
2
4-1/4
White
CE365DW-CTN
CE365D-CTN
US
B
(in.)
D
(in.)
1-1/2
4-15/16
CE365DW-CTN
C
US
LISTED
Cat. No.
P7701W-CAR
B34
Closure Plug (Nonmetallic)
P7701W-CAR
Finish
White
w w w. t n b. c a
Red•Dot®
Weatherproof Products
Outdoor Kits
Cat. No.
CS212
CS312
Traditional 2 Lamp Round Box Kits
CS212
CS212BR
CS212WH
Duplex Weatherproof Outlet Device Kits
CS312
CS312BR
CS312WH
GFCI Weatherproof Outlet Device Kit
CS315
Traditional 2 Lamp, Round Box w/Photocell Kits
CS902
CS902BR
CS902WH
Finish
Silver
Bronze
White
Silver
Bronze
White
Silver
Silver
Bronze
White
All supplied receptacles are tamper resistant
CS315
CS902
w w w.tnb.c a
B35
Red•Dot®
Weatherproof Products
Outlet Boxes and Covers –
Hazardous Locations
Technical Specifications
Applications:
• Junction for branch conduits in hazardous locations
• Accessible wiring chamber provides a convenient location to maintain or change a system, pull conductors and make splices
• Internal hub design ideal for installation where space is limited
Features/Benefits:
• Copper-free (less than 0.004 copper content) aluminum provides increased corrosion resistance
• Precision cast and machined surfaces permit safer wire pulling
• Precision NPT threaded hubs allow trouble-free field installation for rigid or IMC conduit
• Die cast construction and industrial design combine to produce a rugged protective enclosure for devices on industrial and OEM
applications
• Clear UL, CSA and cubic content markings speed approval by inspectors
Standard Materials:
• Die cast aluminum alloy A360 (less than 0.004 copper content)
Standard Finish:
• Aluminum lacquer finish
Compliances:
Compliances as noted on each page of the catalogue include:
• CSA Certified
• UL Listed
• Suitable for hazardous locations
Class I, Groups C, D
NEMA 7CD
Class II, Groups E, F, G
9EFG
Class III, Divisions 1 and 2
12
Copper-free aluminum
(less than 0.004 copper
content)
Internal hub
design
Smooth
conduit
stops
B36
Precision
machined
threads
Internal ground
boss and screw
w w w. t n b. c a
Red•Dot®
Weatherproof Products
Outlet Boxes and Covers –
Hazardous Locations
Internal Hubs with installed Green Ground Screw
Cat. No.
EXUN-1
w w w.tnb.c a
Hub Size
(in.)
Description
5 Hole Outlet Boxes (Cast Aluminum)
1/2
EXUN-1
5 outlets with
3/4
EXUN-2
3 close-up plugs
1
EXUN-3
4 Hole Outlet Boxes (Cast Aluminum)
1/2
EXUN-11
4 outlets with
2 close-up plugs
3/4
EXUN-22
A
(in.)
E
(in.)
3-31/32
4
3-31/32
4
F
(in.)
Cu.
(in.)
3-3/8
20.3
3-9/16
20.0
3-3/8
20.3
B37
Red•Dot®
Weatherproof Products
Outlet Boxes and Covers –
Hazardous Locations
Technical Specifications
Applications:
• Junction for branch conduits in hazardous locations
• Accessible wiring chamber provides a convenient location to maintain or change a system, pull conductors and make splices
• Unique mounting pads and external hub design ideal for installations of OEM devices or instruments
Features/Benefits:
• Copper-free (less than 0.004 copper content) aluminum provides increased corrosion resistance
• Precision cast and machined surfaces permit safer wire pulling
• Precision NPT threaded hubs allow trouble-free field installation for rigid or IMC conduit
• Die cast construction and industrial design combine to produce a rugged protective enclosure for devices on industrial and OEM
applications
• Clear UL, CSA and cubic content markings speed approval by inspectors
Standard Materials:
• Die cast aluminum alloy A360 (less than 0.004 copper content)
Standard Finish:
• Aluminum lacquer finish
Compliances:
Compliances as noted on each page of the catalogue include:
• CSA Certified
• UL Listed
• Class I, Div. 1 and 2, Groups C, D – Explosion proof
Class II,Div. 1, Groups E, F, G – Dust-Ignition proof
Class III, Div. 1 and 2 – Raintight
• NEMA 3, 4, 7 CD, 9 EFG – Wet Locations
Copper-free aluminum
(less than 0.004
copper content)
Internal ground
boss and screw
B38
Unique
mounting pads
Smooth
conduit
stops
External hub
design
Precision
machined
threads
w w w. t n b. c a
Red•Dot®
Weatherproof Products
Outlet Boxes and Covers –
Hazardous Locations
Internal Hubs with installed Green Ground Screw
Cat. No.
GAC
GALB
GAT
GAL
GAX
w w w.tnb.c a
Hub Size Cover
(in.) Opening
A
(in.)
B
(in.)
C
(in.)
Through Feed with Surface (Cast Aluminum)
1/2
GAC-1
3-11/16
4
2-1/4 2-15/16
3/4
GAC-2
1
GAC-3*
“LB” Style with Surface Cover (Cast Aluminum)
1/2
GALB-1
3/4
3-11/16
4
2-1/4 2-15/16
GALB-2
1
GALB-3
1-1/4 3-29/32 4-5/16
3
3-11/16
GALB-4
2
5-3/16
5-3/4
4-1/4 5-1/16
GALB-6*
“T” Style with Surface Cover (Cast Aluminum)
1/2
GAT-1
3/4
3-11/16
4
2-1/4 2-15/16
GAT-2
1
GAT-3
1-1/4 3-29/32 4-5/16
3
3-11/16
GAT-4
“L” Style with Surface Cover (Cast Aluminum)
1/2
GAL-1
3/4
3-11/16
4
2-1/4 2-15/16
GAL-2
1
GAL-3*
1-1/4 3-29/32 4-5/16
3
3-11/16
GAL-4*
1-1/2
GAL-5*
5-3/16
5-3/4
4-1/4 5-1/16
2
GAL-6*
“X” Style with Surface Cover (Cast Aluminum)
1/2
GAX-1
3/4
3-11/16
4
2-1/4 2-15/16
GAX-2
1
GAX-3*
1-1/4 3-29/32 4-5/16
3
3-11/16
GAX-4*
1-1/2
GAX-5*
5-3/16
5-3/4
4-1/4 5-1/16
2
GAX-6*
D
(in.)
1-3/8
1-3/8
2-1/16
2-7/8
1-3/8
2-1/16
1-3/8
F
(in.)
G
(in.)
1-1/16
5-3/16
2-7/32
5-1/2
1-1/16
5-3/16
2-7/32
5-1/2
7/8
1-3/8
5-3/16
2-7/32
5-1/2
7/8
5-11/16
1-1/16
5-3/16
2-7/32
5-1/2
Cu.
(in.)
5-9/16
18.8
5-9/16
18.0
-
6-5/8
1-1/16
5-3/16
2-7/32
5-1/2
6-5/8
69.3
18.8
-
28.8
5-9/16
18.8
28.0
-
5-9/16
5-11/16
7/8
28.0
5-9/16
5-11/16
7/8
2-1/16
2-7/8
6-5/8
1-1/16
2-1/16
2-7/8
5-11/16
H
(in.)
69.3
18.8
28.0
-
69.3
Suffix-OR: O-ring available for NEMA 4 rating
* Made to order items. Consult your Regional Sales Office for lead time and minimum quantities
B39
Red•Dot®
Weatherproof Products
Outlet Boxes and Covers –
Hazardous Locations
Internal Hubs with Green Ground Screw,
Covers and Plugs
Cat. No.
Hub Size Cover
A
(in.) Opening (in.)
B
(in.)
C
(in.)
D
(in.)
“X” Style with Flange and Surface Cover (Cast Aluminum)
1/2
GAFX-1
3/4
3-11/16
4
2-1/4 2-15/16 5-9/16
GAFX-2
1
GAFX-3*
GAFX
Cat. No.
Hub Size
(in.)
A
(in.)
B
(in.)
“U” Style with Canopy Cover (Cast Aluminum)
1/2
4
4-3/16
GAJU-1*
3/4
4
4-3/16
GAJU-2*
1
4
4-3/16
GAJU-3
1-1/2
5-3/4
6-7/16
GAJU-5*
2
5-3/4
6-7/16
GAJU-6
GAJU
F
(in.)
G
(in.)
4-1/2
1/4
4-3/4
5/16
H
(in.)
1-3/8
M
(in.)
Cu.
(in.)
3-5/16
20.0
5-1/2
19.0
C
(in.)
D
(in.)
E
(in.)
F
(in.)
G
(in.)
4
13/16
1-1/2
31/32
5-3/16
4
13/16
1-1/2
31/32
5-3/16
4
13/16
1-1/2
31/32
5-3/16
6-5/8
1-7/16
2-1/16
1-1/2
6-5/8
6-5/8
1-7/16
2-1/16
1-1/2
6-5/8
* Made to order items. Consult your Regional Sales Office for lead time and minimum quantities
B
C
B40
w w w. t n b. c a
Red•Dot®
Weatherproof Products
Outlet Boxes and Covers –
Hazardous Locations
Internal Hubs with installed Green Ground Screw
Cat. No.
GAD
GAJ
Cover Opening (in.)
Fits Boxes (in.)
Dome Style Cover – Inside Height 2-5/8 in. (Class I, Group D only) (Cast Aluminum)
3-11/16
1/2, 3/4, 1
GAD-123*
Canopy Style Cover (Cast Aluminum)
3-11/16
1/2, 3/4, 1
GAJ-123*
3-29/32
1-1/4
GAJ-4*
5-3/16
1-1/2, 2
GAJ-56*
Surface Style Cover (Cast Aluminum)
3-11/16
1/2, 3/4, 1
GAS-123*
3-29/32
1-1/4
GAS-4*
5-3/16
1-1/2, 2
GAS-56*
* Made to order items. Consult your Regional Sales Office for lead time and minimum quantities
GAS
Cat. No.
XPLG-1
Close-up Plugs for Hazardous Locations (Cast Aluminum)
XPLG-1
XPLG-2
XPLG-3
XPLG-4
XPLG-5
XPLG-6
Hub Size (in.)
1/2
3/4
1
1-1/4
1-1/2
2
XPLG-4
w w w.tnb.c a
B41
Red•Dot®
Weatherproof Products
Outlet Boxes and Covers –
Hazardous Locations
Technical Specifications
Applications:
• Junction for branch conduits in hazardous locations
• Accessible wiring chamber provides a convenient location to maintain or change a system, pull conductors and make splices.
Features/Benefits:
•
•
•
•
•
•
Copper-free (less than 0.004 copper content) aluminum alloy provides increased corrosion resistance
Extra wide 3-3/4 in. opening provides more hand space for easy access to the wiring chamber
Precision cast and machined surfaces permit safer wire pulling
Large capacity 31 cu. in. chamber provides more wiring space
Precision NPT threaded hubs allow trouble-free field installation for rigid or IMC conduit
Sand cast construction and industrial design combine to produce a rugged protective enclosure for devices on industrial and OEM
applications
• Clear UL, CSA and cubic content markings speed approval by inspectors
• Hub spacing allows use of EXFU and EXMU unions
Standard Materials:
• Box: Sand Cast aluminum alloy A356.2-T6
• Cover: Die Cast aluminum alloy A360 (less than 0.004 copper content)
Standard Finish:
• Aluminum lacquer finish
Compliances:
Compliances as noted on each page of the catalogue include:
•
•
•
•
CSA Certified
UL Listed
NEC
Suitable for hazardous locations
Class I, Groups C, D
NEMA 7CD
Class II, Groups E, F, G
9EFG
Class III, Divisions 1 and 2
12
Clean cover edges
Internal ground boss and
screw
B42
Heavy wall
construction
Precision machined threads
Copper-free aluminum
(less than 0.004 copper
content)
w w w. t n b. c a
Red•Dot®
Weatherproof Products
Outlet Boxes and Covers –
Hazardous Locations
Internal Hubs with Green Ground Screw, Covers and Plugs
Cat. No.
GASS
Hub
Size
(in.)
Cover
Openin
g
(in.)
A
(in.)
B
(in.)
Outlet Boxes with Surface Cover (Cast Aluminum)
1/2
GASS-1
3/4
4
4-5/8
2-3/8
GASS-2
1
GASS-3
C
(in.)
D
(in.)
E
(in.)
G
(in.)
H
(in.)
Cu.
(in.)
3-3/8
2-3/16
1-3/16
3/4
4
31
Dimensions of all styles when
GASS cover is used
w w w.tnb.c a
B43