TECHNO Full-Flanged Check Valves
Lightweight, seatless design provides virtually no pressure loss
across the valve, reducing wear and resistance to flow
Table of Contents
TECHNO full-flanged Check Valves
Introduction......................................................................................................... 2
Features............................................................................................................... 3
TECHNO Check Style 5003, 5003-316, 5004-CIL, 5004-CAL, 5102 and 5107...... 4
TECHNO Check Style 5003 with 150# Flanged Ends............................................ 5
TECHNO Check Style 5004-CIL and 5004-CAL with 125# Flanged Ends............... 6
TECHNO Check Style 5102 with 125# Flanged Ends............................................ 7
TECHNO Check Style 5107 with 300# Flanged Ends............................................ 8
Pressure Drop Charts for Water and Air Service.................................................... 9
TECHNO Multipurpose Check Valves.................................................................... 10
CAMSERV Services for Valves and Actuation........................................................ 11
Trademark Information........................................................................................ 12
1
TECHNO Full-Flanged Check Valves
Oklahoma City,
Okla., USA
C
ameron is a leading provider of valves, valve automation and measurement systems
to the oil and gas industry. Our products are primarily used to control, direct and
measure the flow of oil and gas as it is moved to refineries, petrochemical plants and
industrial centers for processing.
We provide valve products that are sold through distributor networks worldwide for use
in both oil and gas and industrial applications, and include widely recognized brands such
as DEMCO®, NAVCO®, NEWCO®, NUTRON®, Thornhill Craver®, Techno™,
TOM Wheatley®, Wheatley® and WKM®.
The design features of Cameron’s Techno elastomer-hinged and metal-hinged check
valve include a tight shut-off feature and the ability to be mounted in almost any position.
TECHNO check valves are known for their ease of maintenance and exceptional flow
characteristics. Cameron provides economical and dependable TECHNO full-flanged
check valves for use within a wide range of service conditions.
2
FEATURES
Design Features
Cameron’s TECHNO full-flanged check valves offer the following features:
• F or the most efficient piping layout, the check valve can be mounted in almost
any position.
• U
nrestricted full-port seatless design provides free flowthrough with virtually
no pressure loss.
• T he stationary hinge-post and hinge-clamp designs eliminate wear to hinges,
pins, valve seats and springs.
Unique Flexible Elastomer Seal
Continuous elastomer seal provides
closure around valve bore with the
strength and durability to ensure
prolonged life cycle, outwearing
traditional metal-seated valves.
Non-Slam Quick-Closure Feature
The valve plate design reduces travel
from fully open to fully closed position
and offers complete metal-to-metal
valve plate structural support.
3
TECHNO Check Style 5003, 5003-316, 5004-CIL, 5004-CAL, 5102 and 5107
Cameron’s TECHNO line has been a leading supplier
of high-quality check valves to the industry for many
years. Thousands of TECHNO products are presently in
service, demonstrating a superior performance record.
The Techno check design, combined with an extensive
selection of materials, results in high performance
and reliability for most liquid or gas applications.
The unique design, combined with years of
experience, allows us to excel in some of the
most difficult applications.
Style 5003
Style 5004
Standard Models and Materials
4
Style
Body
Internals
Flange Series
Cold Working Pressure (psi)
5003
Carbon Steel
316 Stainless Steel
150
150
5003-316
316 Stainless Steel
316 Stainless Steel
150
150
5004 CIL
Cast Iron Lightweight
Aluminum
125
50
5004 CAL
Cast Aluminum Lightweight
Aluminum
125
50
5102
Carbon Steel Lightweight
Aluminum
125
150
5107
Carbon Steel
316 Stainless Steel
300
300
TECHNO CHECK STYLE 5003 WITH 150# FLANGED ENDS
C
D
E
DIA
Holes Equally Spaced On
DIA Bolt Circle
A
Flow
B
General Dimensions for Style 5003
DIA
Optional Materials Selection
Valve Size
(in.)
A
B
C
D
E
1
3
4-1/4
5/8
4
3-1/8
Internal Materials
1-1/4
4-1/2
4-5/8
5/8
4
3-1/2
• Aluminum
1-1/2
4-1/2
5
5/8
4
3-7/8
2
4-1/2
6
3/4
4
4-3/4
• Brass
2-1/2
5
7
3/4
4
5-1/2
• 316 Stainless Steel
3
5
7-1/2
3/4
4
6
4
5-1/2
9
3/4
8
7-1/2
5
6
10
7/8
8
8-1/2
6
7
11
7/8
8
9-1/2
Material
Temperature Range*
8
9
13-1/2
7/8
8
11-3/4
10
11
16
1
12
14-1/4
• Buna-N
-60° F to 225° F (-51° C to 107° C)
12
13
19
1
12
17
• EPDM
-40° F to 300° F (-40° C to 149° C)
14
15
21
1-1/8
12
18-3/4
16
17
23-1/2
1-1/8
16
21-1/4
• Viton -20° F to 400° F (-29° C to 204° C)
18
19
25
1-1/4
16
22-3/4
• Silicone
-100° F to 500° F (-73° C to 260° C)
20
21
27-1/2
1-1/4
20
25
24
25
32
1-3/8
20
29-1/2
30
31
38-3/4
1-3/8
28
36
36
37
46
1-5/8
32
42-3/4
42
43
53
1-5/8
36
49-1/2
48
49
59-1/2
1-5/8
44
56
All dimensions are in inches.
For sizes above 14“, see Style 5003 or 5102.
Sealing Member Materials
®
* This temperature range is for general guidance.
The figures may vary with application.
Spring Material
• 3
02 Stainless Steel
Standard Models and Materials
Style
Body
Internals*
Cold Working Pressure (psi)
5003
Steel
316 Stainless Steel
150
5003-316
316 Stainless Steel
316 Stainless Steel
150
* Standard Elastomer: Buna-N
Consult Cameron for materials, sizes and pressure ratings not shown.
5
TECHNO CHECK STYLE 5004-CIL and 5004-CAL WITH 125# FLANGED ENDS
C
D
E
DIA
Holes Equally Spaced On
DIA Bolt Circle
A
Flow
B
General Dimensions for Style
5004-CIL and 5004-CAL
Optional Materials Selection
Valve Size
(in.)
A
B
C
D
E
2
4-1/2
6
3/4
4
4-3/4
2-1/2
5
7
3/4
4
5-1/2
3
5
7-1/2
3/4
4
6
4
5-1/2
9
3/4
8
7-1/2
5
6
10
7/8
8
8-1/2
6
7
11
7/8
8
9-1/2
8
9
13-1/2
7/8
8
11-3/4
Material
Temperature Range*
10
11
16
1
12
14-1/4
• Buna-N
-60° F to 225° F (-51° C to 107° C)
12
13
19
1
12
17
• EPDM
-40° F to 300° F (-40° C to 149° C)
14
15
21
1-1/8
12
18-3/4
Internal Materials
• Aluminum
• Brass
• 316 Stainless Steel
Sealing Member Materials
• Viton
-20° F to 400° F (-29° C to 204° C)
All dimensions are in inches.
For sizes above 14“, see Style 5003 or 5102.
• Silicone
-100° F to 500° F (-73° C to 260° C)
Standard Models and Materials
* This temperature range is for general guidance.
The figures may vary with application.
Style
Body
Internals*
Cold Working
Pressure (psi)
5004-CIL
Cast Iron
Lightweight
Aluminum
50
5004-CAL
Cast Aluminum
Lightweight
Aluminum
50
* Standard Elastomer: Buna-N
Consult Cameron for materials, sizes and pressure ratings not shown.
6
DIA
Spring Material
• 3
02 Stainless Steel
TECHNO CHECK STYLE 5102 WITH 125# FLANGED ENDS
C
D
E
DIA
Holes Equally Spaced On
DIA Bolt Circle
A
Flow
B
DIA
Optional Materials Selection
General Dimensions for Style 5102
Valve Size
(in.)
A
B
C
D
E
3
5
7 1/2
3/4
4
6
4
5-1/2
9
3/4
8
7-1/2
5
6
10
7/8
8
8-1/2
6
7
11
7/8
8
9-1/2
8
9
13-1/2
7/8
8
11-3/4
10
11
16
1
12
14-1/4
12
13
19
1
12
17
Material
Temperature Range*
14
15
21
1-1/8
12
18-3/4
• Buna-N
-60° F to 225° F (-51° C to 107° C)
16
17
23-1/2
1-1/8
16
21-1/4
• EPDM
-40° F to 300° F (-40° C to 149° C)
18
19
25
1-1/4
16
22-3/4
20
21
27-1/2
1-1/4
20
25
• Viton
-20° F to 400° F (-29° C to 204° C)
24
25
32
1-3/8
20
29-1/2
• Silicone
-100° F to 500° F (-73° C to 260° C)
30
31
38-3/4
1-3/8
28
36
36
37
46
1-5/8
32
42-3/4
All dimensions are in inches.
Internal Materials
• Aluminum
• Brass
• 316 Stainless Steel
Sealing Member Materials
* This temperature range is for general guidance.
The figures may vary with application.
Spring Material
• 3
02 Stainless Steel
Standard Models and Materials
Style
Body
Internals*
Cold Working
Pressure (psi)
5102
Steel Lightweight
Aluminum
150
* Standard Elastomer: Buna-N
Consult Cameron for materials, sizes and pressure ratings not shown.
7
TECHNO CHECK STYLE 5107 WITH 300# FLANGED ENDS
C
D
E
DIA
Holes Equally Spaced On
DIA Bolt Circle
A
Flow
B
DIA
Optional Materials Selection
General Dimensions for Style 5107
Valve Size
(in.)
A
B
C
D
E
1
4-1/2
4-7/8
3/4
4
3 1/2
1-1/4
4-1/2
5-1/4
3/4
4
3 7/8
• Aluminum
• Brass
Internal Materials
1-1/2
5-1/8
6-1/8
7/8
4
4-1/2
2
5-1/8
6-1/2
3/4
8
5
2-1/2
5-5/8
7-1/2
7/8
8
5-7/8
3
6
8-1/4
7/8
8
6-5/8
4
6-5/8
10
7/8
8
7-7/8
5
7-1/4
11
7/8
8
9-1/4
Material
Temperature Range*
6
8
12-1/2
7/8
12
10-5/8
• Buna-N
-60° F to 225° F (-51° C to 107° C)
8
10-1/2
15
1
12
13
10
12-1/2
17-1/2
1-1/8
16
15-1/4
• EPDM
-40° F to 300° F (-40° C to 149° C)
12
14-1/2
20-1/2
1-1/4
16
17-3/4
• Viton
-20° F to 400° F (-29° C to 204° C)
14
16-1/2
23
1-1/4
20
20-1/4
• Silicone
-100° F to 500° F (-73° C to 260° C)
16
18-1/2
25-1/2
1-3/8
20
22-1/2
18
20-3/4
28
1-3/8
24
24-3/4
20
24
30-1/2
1-3/8
24
27
24
27
36
1-5/8
24
32
30
35
43
1-7/8
28
39-1/4
36
41
50
2-1/8
32
46
42
47
57
2-1/8
36
52-3/4
• 316 Stainless Steel
Sealing Member Materials
* This temperature range is for general guidance.
The figures may vary with application.
Spring Material
• 3
02 Stainless Steel
All dimensions are in inches.
Standard Models and Materials
Style
Body
Internals*
Cold Working Pressure (psi)
5107
Steel
316 Stainless Steel
300
5107-316
316 Stainless Steel
316 Stainless Steel
300
* Standard Elastomer: Buna-N
Consult Cameron for materials, sizes and pressure ratings not shown.
8
PRESSURE DROP CHARTS FOR WATER AND AIR SERVICE
Pressure Drop in psi
100.0
10.0
2”
3”
2-1/2”
0.1
5”
4”
8”
6”
12” 16”
10” 14” 18”
20”
24”
30”
42” 54” 66”
36”
48” 60”
72”
0.01
10
100
1,000
10,000 100,0001,000,000
Flow of Water at 70 Degrees in gal/min
Pressure Drop in psi
10.0
1.0
2”
2-1/2”
0.1
3”
4”
5”
8”
6”
12” 16”
10” 14” 18”
30”
20”
24”
36”
42” 54” 66”
48” 60”
72”
0.01
100
1,000
10,000
100,000 1,000,00010,000,000
Air Flow at 70 Degrees in cf/min
9
TECHNO MULTIPURPOSE CHECK VALVES
The following check valves also are available:
• Metal-hinged, wafer style
• Elastomer-hinged design with the following end connections:
• Male threaded
• Flanged
• Wafer
• Grooved
• Plain
• Combination
• Special
• Deep well, female threaded
For a complete portfolio offering, please visit:
www.c-a-m.com/TECHNO
10
CAMSERV Services for Valves and Actuation
™
We build it. We back it.
Global Network and Local Support
Cameron is well-positioned to deliver total aftermarket
support, quickly and efficiently, with unmatched OEM
expertise. Our highly skilled engineers and technicians are
available around the clock, seven days a week to respond
to customer queries, troubleshoot problems and offer
reliable solutions.
Easily Accessible Parts and Spare Valves
•OEM spare valves, actuators and parts (including
non-Cameron brands)
• Handling, storage, packaging and delivery
• Dedicated stocking program
Comprehensive Aftermarket Services Portfolio
• Parts and spare valves
• Repair
• Field services
• Preventative maintenance
• Equipment testing and diagnostics
• Remanufacturing
• Asset preservation
• Customer property management
• Training and recertification services
• Warranty
Customized Total Valve Care (TVC) Programs
SM
Customized asset management plans that optimize
uptime, availability and dedicated services.
• Engineering consultancy
• Site management
• Flange management
• Startup and commissioning
• Spare parts and asset management
• Operational support
USA • CANADA • LATIN AMERICA • EUROPE • RUSSIA • AFRICA • MIDDLE EAST • ASIA PACIFIC
11
Trademark Information
TECHNO and CAMSERV are trademarks of Cameron.
This document contains references to registered trademarks or product designations
that are not owned by Cameron.
Registered Trademark
Viton
12
Owner
E.I. DuPont De Nemours & Company
13
3250 Briarpark Drive, Suite 300
Houston, TX 77042
USA
Tel 1 281 499 8511
For more about TECHNO check valves:
TECHNO@c-a-m.com
www.c-a-m.com/TECHNO
XLCL
L CEE
ELELN
AX
TE
EN
CCE
ENL
TA
M
ETFYET
HSASFA
SYEC
LTLHT
AU
AA
HEE
VDIREONNVM
N
AN
IROE
TYE
NN
NRID
E
CCA
N
AM
ON
MEER
RO
HSE Policy Statement
At Cameron, we are committed ethically, financially and personally to a
working environment where no one gets hurt and nothing gets harmed.
H
©2013 Cameron | DEMCO, NAVCO, NEWCO, NUTRON, THORNHILL CRAVER, TOM WHEATLEY, WHEATLEY AND WKM are registered trademarks of Cameron.
TECHNO and CAMSERV are trademarks of Cameron. Viton is a registered trademark of E.I. DuPont De Nemours & Company. | SWP 1.5M 8/13 AD00948V