SECTION D – ASME FLANGED BALL VALVES
Table of Contents
SERIES
DESCRIPTION
PAGE
Features and Benefits.............................................................................................................................................................................. D-3
Variations Available.................................................................................................................................................................................. D-4
CLASS 150
CARBON STEEL
88A-100 Series .......................ASME Class 150 Flanged Carbon Steel.............................................................................D-55-58
88A-200 Series........................ASME Class 150 Flanged Full Port Carbon Steel...........................................................D-59-62
88B-100 Series.........................ASME Class 150 Flanged Uni-Body Carbon Steel.........................................................D-71-72
88L-140 Series ........................ASME Class 150 Flanged Low Temp Carbon Steel.......................................................D-73-76
88L-240 Series ........................ASME Class 150 Flanged Full Port Low Temp Carbon Steel......................................D-77-80
STAINLESS STEEL
87A-100 Series .......................ASME Class 150 Flanged Stainless Steel.............................................................................. D-5-8
87A-200 Series .......................ASME Class 150 Flanged Full Port Stainless Steel...........................................................D-9-12
87B-100 Series ........................ASME Class 150 Flanged Uni-Body Stainless Steel......................................................D-21-22
DUPLEX STAINLESS STEEL
87J-100 Series ........................Duplex ASME Class 150 Flanged Stainless Steel...........................................................D-23-26
87J-200 Series ........................Duplex ASME Class 150 Flanged Full Port Stainless Steel.........................................D-27-30
SUPER DUPLEX STAINLESS STEEL
87K-100 Series ........................Super Duplex ASME Class 150 Flanged Stainless Steel..............................................D-39-42
87K-200 Series ........................Super Duplex ASME Class 150 Flanged Full Port Stainless Steel............................D-43-46
ALLOY
87A-400 Series .......................ASME Class 150 Flanged Alloy 20.......................................................................................D-89-91
87A-500 Series .......................ASME Class 150 Flanged Full Port Alloy 20.....................................................................D-92-94
CLASS 300
CARBON STEEL
88A-700 Series .......................ASME Class 300 Flanged Carbon Steel.............................................................................D-63-66
88A-900 Series .......................ASME Class 300 Flanged Full Port Carbon Steel...........................................................D-67-70
88L-740 Series ........................ASME Class 300 Flanged Low Temp Carbon Steel.......................................................D-81-84
88L-940 Series ........................ASME Class 300 Flanged Full Port Low Temp Carbon Steel......................................D-85-88
STAINLESS STEEL
87A-700 Series .......................ASME Class 300 Flanged Stainless Steel..........................................................................D-13-16
87A-900 Series .......................ASME Class 300 Flanged Full Port Stainless Steel.........................................................D-17-20
DUPLEX STAINLESS STEEL
87J-700 Series ........................Duplex ASME Class 300 Flanged Stainless Steel...........................................................D-31-34
87J-900 Series ........................Duplex ASME Class 300 Flanged Full Port Stainless Steel.........................................D-35-38
SUPER DUPLEX STAINLESS STEEL
87K-700 Series ........................Super Duplex ASME Class 300 Flanged Stainless Steel..............................................D-47-50
87K-900 Series ........................Super Duplex ASME Class 300 Flanged Full Port Stainless Steel............................D-51-54
(continued on next page)
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-1
SECTION D – ASME FLANGED BALL VALVES
SERIES
DESCRIPTION
PAGE
CLASS 600
CARBON STEEL
88A-F00 Series .......................ASME Class 600 Flanged Full Port Carbon Steel......................................................D-100-104
88L-F40 Series.........................ASME Class 600 Flanged Full Port Low Temp Carbon Steel.................................D-105-109
STAINLESS STEEL
87A-F00 Series .......................ASME Class 600 Flanged Full Port Stainless Steel ........................................................D-95-99
Throughout this catalog, products that have a Lead Free* option will be identified with this logo.
* LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with Federal Public Law
111-380.
ANSI 3rd party approved and listed.
**Any imported products are identified as “Apollo International”.
D-2
www.apollovalves.com
Customer Service (704) 841-6000
ASME FLANGED BALL VALVES
Features and Benefits
87A, 87A-F, 87B, 88A, 88A-F, 88B, 88L, & 88L-F Series
STANDARDS COMPLIANCE:
Except where specifically noted all valves within this family of products complies with the requirements of this listed standard.
ASME B16.5
ASME B16.10
ASME B16.34
ASME B16.33
ASME B16.38
ASME B31.1
ASME B31.3 ASME B31.8 API 607 API 608 MSS SP-25 MSS SP-61 MSS SP-72 UL 125 NSF/ANSI 61
NSF-372
”Pipe Flanges and Flanged Fittings”
”Face to Face Dimensions of Valves”
”Valves - Flanged, Threaded, and Welding End”
“Manual Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig”
“Large Metallic Valves for Gas Distribution (Manually Operated NPS 2.5” to 12”, 125 psig)”
“Power Piping”
“Chemical Plant and Petroleum Refinery Piping”
“Gas Transmission and Distribution Piping Systems”
”Fire Test - Soft Seated Quarter Turn Valves” (-24 Option Required). See specific tech sheet for 5th or 6th edition.
”Ball Valves - Flanged, Threaded, and Welding End”
”Standard Marking System for Valves”
”Pressure Testing of Steel Valves”
”Ball Valves with Flanged or Buttweld Ends”
“Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief )”
Section 8, Annex G (1/2” to 4” 87A Series)
Drinking Water System Components - Lead Content (1/2” to 4” 87A Series)
STANDARD FEATURES:
Except where specifically noted all valves within this family of products include all listed features as standard.
•
•
•
•
•
•
•
•
•
•
•
•
Two Position Locking Device (Valves 6” Full Port, 8” Standard Port and smaller)
Chevron Style Adjustable Stem Seals
ISO 5211 Mounting Pad Bolt Pattern
Slot Vented Ball for Thermal Expansion
Rated up to 150 psig Saturated Steam
- ASME Class 150, 300, & 600 Valves
Rated up to 250 psig Saturated Steam
- ASME Class 300 Valves Require the -65 Option
- ASME Class 600 Valves Require the -24-80 Options or -38 Option
Anti-static Grounded Ball and Stem
Blow-out Proof Stem Design
Cast Boss for Bleed / Drain Port
Vacuum Service to 29 inches of Hg
NACE MR0175 (2000) Compliance on all 87A/87B/88A/88B/88L Valves with SS Ball & Stem
NACE MR0103 (2003) Compliance on all 87A/87B/88A/88B/88L Valves with SS Ball & Stem
PRODUCT APPROVALS:
CSA*
UL*
(Reference: ASME B16.33 & B16.38)
ASME Class 150 & 300 only
(Reference: Control Number 195H)
ASME Class 150 & 300 only
UL (YSDT) LP-Gas Shut-Off Valves
UL (MHKZ) Manual Valves
UL (YRBX) Flammable Liquid Shut-Off Valves
UL (YRPV) Gas Shut-Off Valves
UL (YQNZ) Compressed Gas Shut-Off Valves
UL (YQAR) Anhydrous Ammonia Shut-Off Valves
* Requires “UL” suffix for markings.
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-3
ASME FLANGED BALL VALVES
87A, 87B, 88A, 88B, & 88L Series
VARIATIONS AVAILABLE:
REFERENCE DATA:
ALLOY SERIES FLANGED BALL VALVES
STAINLESS
*
ALLOY 20
STEEL
HASTELLOY
87A-10X
87A-40X
87H-1HX
*
NICKEL
87N-1NX
*
NI-CU
87M-13X
SIZE
PORT
ANSI CLASS
1.5” & 2”
Standard
150
DIMENSIONAL
DATA PAGE
D-1
2.5” & 3”
Standard
150
D-2
87A-10X
87A-40X
87H-1HX
87N-1NX
N/A
4”, 6” & 8”
Standard
150
D-3
87A-10X
87A-40X
87H-1HX
87N-1NX
N/A
10”
Standard
150
D-4
87A-10X
87A-40X
87H-1HX
87N-1NX
N/A
1/2”, 3/4” & 1”
Full
150
D-5
87A-20X
87A-50X
87H-2HX
87N-2NX
87M-23X
1.5”, 2” & 2.5”
Full
150
D-6
87A-20X
87A-50X
87H-2HX
87N-2NX
87M-23X
3”, 4”, & 6”
Full
150
D-7
87A-20X
87A-50X
87H-2HX
87N-2NX
N/A
8”, 10” & 12”
Full
150
D-8
87A-20X
87A-50X
87H-2HX
87N-2NX
N/A
1.5” & 2”
Standard
300
D-9
87A-70X
87A-80X
87H-7HX
87N-7NX
N/A
2.5” & 3”
Standard
300
D-10
87A-70X
87A-80X
87H-7HX
87N-7NX
N/A
4”, 6” & 8”
Standard
300
D-11
87A-70X
87A-80X
87H-7HX
87N-7NX
N/A
10”
Standard
300
D-12
87A-70X
87A-80X
87H-7HX
87N-7NX
N/A
1/2”, 3/4” & 1”
Full
300
D-13
87A-90X
87A-60X
87H-9HX
87N-9NX
87M-93X
1.5”, 2” & 2.5”
Full
300
D-14
87A-90X
87A-60X
87H-9HX
87N-9NX
87M-93X
3”, 4”, & 6”
Full
300
D-15
87A-90X
87A-60X
87H-9HX
87N-9NX
N/A
8”, 10” & 12”
Full
300
D-16
87A-90X
87A-60X
87H-9HX
87N-9NX
N/A
* Minimum Quantities May Apply
ALLOY MATERIAL OF CONSTRUCTION FOR PRESSURE CONTAINING /
RETAINING COMPONENTS:
ALLOY
Valve Series
Body
Retainer
Ball
Stem
Fasteners
STAINLESS STEEL
ALLOY 20
HASTELLOY*
NICKEL*
NI-CU ALLOY*
87A-100/200,
87A-400/500,
87H-1H0/2H0,
87N-1N0/2N0,
87M-130/230,
87A-700/900
87A-600/800
87H-7H0/9H0
87N-7N0/9N0
87M-730/930
A351-CF8M
A351-CN7M
A494-CW12MW
A494-CZ100
A494-M35-1
A351-CF8M or
A351-CN7M or
A494-CW12MW
A494-CZ100 or
A494-M35-1 or
A276-316
B473-N08020
or B574-C276
B160-200
B164-K400
A351-CF8M or
A351-CN7M or
A494-CW12MW
A494-CZ100 or
A494-M35-1 or
A276-316
B473-N08020
or B574-C276
B160-200
B164-K400
A276-316
B473-N08020
B574-C276
B160-200
B164-K400
A193-B8M,
A193-B8M,
A193-B8M,
A193-B8M,
A193-B8M,
A194-Gr8
A194-Gr8
A194-Gr8
A194-Gr8
A194-Gr8
* Minimum Quantities May Apply
D-4
www.apollovalves.com
Customer Service (704) 841-6000
87A-100 SERIES
Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5” through 2”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
87H -
87M -
87N -
87S -
MATERIAL
ASTM A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
302 or 304 SS
316 SS
302 or 304 SS with Vinyl Grip
RPTFE
ASTM A276 Type 316
18-8 SS
302 or 304 SS
RPTFE
302 or 304 SS
SS
Hastelloy
Monel (1.5” to 2” only)
Nickel
304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Port with Plug
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE) 87A/88A Series
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 2
PRODUCT
NUMBER
87A-107-01
87A-108-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
1.25
1.50
6.50
7.00
3.50
3.69
4.85
4.62
6.53
6.65
0.47
0.72
1.85
2.41
2.38
3.09
I
J
K
L
M
1.392
1.949
0.696
0.974
0.500
0.625
0.287
0.412
1/4-20
5/16-18
N
WT.
1.50
2.00
9
18
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-5
87A-100 SERIES
Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 2.5” through 3”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
VARIATIONS AVAILABLE:
87H - Hastelloy
87N - Nickel
87S - 304L SS
MATERIAL
ASTM A351 CF8M
ASTM A351 CF8M
ASTM A276 Type 316 or A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
OPTIONS AVAILABLE:
(Mre information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-67Cleaned For Industrial Gases
-69Drilled and Tapped Purge Port with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded 87A/88A Series (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE) 87A/88A Series
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 2
PRODUCT
NUMBER
87A-109-01
87A-100-01
D-6
SIZE
A
B
C
D
E
F
G
H
2.5”
3”
2.00
2.50
7.50
8.00
3.50
3.51
5.61
6.24
8.41
8.41
0.80
0.80
3.31
3.94
4.08
4.71
REV. 12APR16
www.apollovalves.com
I
J
K
L
M
1.949
1.949
0.974
0.974
0.750
0.750
0.477
0.477
5/16-18
5/16-18
Customer Service (704) 841-6000
N
WT.
2.50
3.00
27
34
87A-100 SERIES
Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 4” through 8”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
Pipe Handle
VARIATIONS AVAILABLE:
87H - Hastelloy
87N - Nickel
87S - 304L SS
MATERIAL
ASTM A351 CF8M
ASTM A351 CF8M
ASTM A276 Type 316 or A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
Galvanized Steel (not Shown)
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-67Cleaned For Industrial Gases
-69Drilled and Tapped Purge Ports with Plugs
-70Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE) 87A/88A Series
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 2
PRODUCT
NUMBER
87A-10A-01
87A-10C-01
87A-10E-01
SIZE
A
4”
6”
8”
3.00
4.00
6.00
B
9.00
10.50
18.00
C
4.18
4.69
9.00
D
8.80
9.99
13.73
E
F
G
H
3.88
5.13
7.00
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
N
WT.
4.00
6.00
8.00
73
117
310
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-7
87A-100 SERIES
Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 10”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
87H - Hastelloy
87N - Nickel
87S - 304L SS
MATERIAL
ASTM A351 CF8M
ASTM A351 CF8M
ASTM A276 Type 316 or A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
RPTFE
RPTFE
ASTM A193 Grade B8M
ASTM A194 Grade 8
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Port with Plugs
-704” Extended Bonnet
-77Live Loaded 87A/88A Series (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 2
PRODUCT
NUMBER
87A-10G-01
D-8
SIZE
A
10”
8.00
REV. 12APR16
B
C
D
21.00
10.37
12.83
E
F
9.18
1.00
G
H
I
J
K
10.22
4.596
2.298
2.000
1.375
www.apollovalves.com
L
3/4-10
Customer Service (704) 841-6000
M
WT.
10.00
526
87A-200 SERIES
Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2” through 1”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART (1/2” & 3/4” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Stem Nut
Lever
Stem Bearing
Stop
Body Seal
Lockwasher
Grounding Spring
Grounding Spring
PART (1” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
MATERIAL
ASTM A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
300 Series Stainless Steel
300 Series Stainless Steel w/ Vinyl Grip
RPTFE
300 Series Stainless Steel
RPTFE
300 Series Stainless Steel
ASTM A313 Stainless Steel
ASTM A313 Stainless Steel
MATERIAL
ASTM A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
302 or 304 SS
316 SS
302 or 304 with Vinyl Grip
RPTFE
ASTM A276 Type 316
18-8 SS
302 or 304 SS
RPTFE
302 or 304 SS
SS
1/2” & 3/4” VALVES
87H -
87M -
87N -
87S -
Hastelloy
Monel
Nickel
304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Port with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
1” VALVE
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 2
PRODUCT
NUMBER
87A-203-01
87A-204-01
87A-205-01
SIZE
A
B
C
D
E
F
G
H
1/2”
3/4”
1”
0.50
0.75
1.00
4.25
4.62
5.00
2.06
2.18
2.32
3.31
3.89
4.62
5.11
5.53
6.53
0.30
0.36
0.47
1.09
1.65
1.62
1.41
1.99
2.15
I
J
K
L
1.00
1.392
1.392
0.500
0.696
0.696
0.375
0.500
0.500
0.245
0.287
0.287
M
10-24
1/4-20
1/4-20
WT.
5
6
7
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-9
87A-200 SERIES
Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1.5” through 2.5”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
VARIATIONS AVAILABLE:
87H -
87M -
87N -
87S -
MATERIAL
ASTM A351 CF8M
ASTM A351 CF8M
ASTM A276 Type 316 or A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
Hastelloy
Monel
Nickel
304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated) (up to 2.5”)
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-MGGear Operator with Standard Handwheel
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 2
PRODUCT
NUMBER
87A-207-01
87A-208-01
87A-209-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
2.5”
1.50
2.00
2.50
6.50
7.00
7.50
3.00
3.04
3.34
4.62
5.61
6.24
6.65
8.41
8.41
0.72
0.80
0.80
2.41
3.31
3.94
3.09
4.08
4.71
D-10 REV. 12APR16
www.apollovalves.com
I
J
K
L
M
WT.
1.949
1.949
1.949
0.974
0.974
0.974
0.625
0.750
0.750
0.412
0.477
0.477
5/16-18
5/16-18
5/16-18
14
25
30
Customer Service (704) 841-6000
87A-200 SERIES
Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 3” through 6”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Pipe Handle
VARIATIONS AVAILABLE:
87H - Hastelloy
87N - Nickel
87S - 304L SS
MATERIAL
ASTM A351 CF8M
ASTM A351 CF8M
ASTM A276 Type 316 or A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 with Vinyl Grip
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
Galvanized Steel (not shown)
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 2
PRODUCT
NUMBER
87A-200-01
87A-20A-01
87A-20C-01
SIZE
A
3”
4”
6”
3.00
4.00
6.00
B
8.00
9.00
15.50
C
3.68
3.94
7.19
D
8.80
9.99
13.73
E
F
G
H
3.88
5.13
7.00
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
WT.
60
91
248
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-11
87A-200 SERIES
Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 8” through 12”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
87H - Hastelloy
87N - Nickel
87S - 304L SS
MATERIAL
ASTM A351 CF8M
ASTM A351 CF8M
ASTM A276 Type 316 or A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
RPTFE
RPTFE
ASTM A193 Grade B8M
ASTM A194 Grade 8
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet (8” Only)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 2
PRODUCT
NUMBER
87A-20E-01
87A-20G-01
87A-20H-01
SIZE
8”
10”
12”
D-12 REV. 12APR16
A
B
C
D
E
8.00
10.00
12.00
18.00
21.00
24.00
8.88
10.26
12.09
12.83
18.57
20.31
9.18
11.33
13.40
F
1.00
2.31
2.31
G
10.22
12.80
14.92
www.apollovalves.com
Customer Service (704) 841-6000
87A-700 SERIES
Stainless Steel ASME Class 300 Flanged Std. Port Ball Valve - 1.5” through 2”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
87H -
87M -
87N -
87S -
MATERIAL
ASTM A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
302 & 304 SS
316 SS
302 & 304 SS with Vinyl Grip
RPTFE
ASTM A276 Type 316
18-8 SS
302 or 304 SS
RPTFE
302 or 304 SS
SS
Hastelloy
Monel
Nickel
304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14 Side Vented Ball (See Page J-2)
-15Wheel Handle, Steel
-21 UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35 PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-11, GRAPH NO. 6
PRODUCT
NUMBER
87A-707-01A
87A-708-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
1.25
1.50
7.50
8.50
4.50
5.19
4.85
4.62
6.53
6.65
0.47
0.72
1.85
2.41
2.38
3.09
I
J
K
L
M
1.392
1.949
0.696
0.974
0.500
0.625
0.287
0.412
1/4-20
5/16-18
N
WT.
1.50
2.00
15.7
24.0
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-13
87A-700 SERIES
Stainless Steel ASME Class 300 Flanged Std. Port Ball Valve - 2.5” through 3”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
VARIATIONS AVAILABLE:
87H - Hastelloy
87N - Nickel
87S - 304L SS
MATERIAL
ASTM A351 CF8M
ASTM A351 CF8M
ASTM A276 Type 316 or A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 with Vinyl Grip
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated) (2.5” only)
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-11, GRAPH NO. 6
PRODUCT
NUMBER
87A-709-01
87A-700-01
SIZE
A
2.5”
3”
2.00
2.50
D-14 REV. 12APR16
B
9.50
11.12
C
D
E
F
G
H
4.75
5.56
5.61
6.24
8.41
8.41
0.80
0.80
3.31
3.94
4.08
4.71
www.apollovalves.com
I
J
K
L
M
1.949
1.949
0.974
0.974
0.750
0.750
0.477
0.477
5/16-18
5/16-18
Customer Service (704) 841-6000
N
WT.
2.50
3.00
39
55
87A-700 SERIES
Stainless Steel ASME Class 300 Flanged Std. Port Ball Valve - 4” through 8”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Adapter Screw
Pipe Handle
VARIATIONS AVAILABLE:
87H - Hastelloy
87N - Nickel
87S - 304L SS
MATERIAL
ASTM A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316 or A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
18-8 SS
Galvanized Steel (not shown)
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-11, GRAPH NO. 6
PRODUCT
NUMBER
87A-70A-01
87A-70C-01
87A-70E-01
SIZE
A
4”
6”
8”
3.00
4.00
6.00
B
12.00
15.88
19.75
C
5.68
7.38
9.00
D
8.80
9.99
13.73
E
F
G
H
4.06
5.25
7.30
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
N
WT.
4.00
6.00
8.00
95
187
400
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-15
87A-700 SERIES
Stainless Steel ASME Class 300 Flanged Standard Port Ball Valve - 10”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
87H - Hastelloy
87N - Nickel
87S - 304L SS
MATERIAL
ASTM A351 CF8M
ASTM A351 CF8M
ASTM A276 Type 316 or A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
RPTFE
RPTFE
ASTM A193 Grade B8M
ASTM A194 Grade 8
OPTIONS AVAILABLE:
(More information in Section J)
G
H
I
J
K
10.22
4.596
2.298
2.000
1.375
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration (Less Gear Operator)
-14Side Vented Ball (See Page J2)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-77Live Loaded 87A/88A Series (Gear, Actuator)
-80Multi-Seal (Super TFE) 87A/88A Series
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-11, GRAPH NO. 6
PRODUCT
NUMBER
87A-70G-01
SIZE
A
10”
8.00
D-16 REV. 12APR16
B
C
D
22.38
10.69
12.83
E
F
9.56
1.00
www.apollovalves.com
L
3/4-10
Customer Service (704) 841-6000
M
10.00
87A-900 SERIES
Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2” through 1”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART (1/2” & 3/4” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Stem Nut
Lever
Stem Bearing
Stop
Body Seal
Lockwasher
Grounding Spring
Grounding Spring
PART (1” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
MATERIAL
ASTM A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
300 Series Stainless Steel
300 Series Stainless Steel w/ Vinyl Grip
RPTFE
300 Series Stainless Steel
RPTFE
300 Series Stainless Steel
ASTM A313 Stainless Steel
ASTM A313 Stainless Steel
MATERIAL
ASTM A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
302 or 304 SS
316 SS
302 or 304 with Vinyl Grip
RPTFE
ASTM A276 Type 316
18-8 SS
302 or 304 SS
RPTFE
302 or 304 SS
SS
1/2” & 3/4” VALVES
87H -
87M -
87N -
87S -
Hastelloy
Monel
Nickel
304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Port with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
1” VALVE
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-11, GRAPH NO. 6
PRODUCT
NUMBER
87A-903-01
87A-904-01
87A-905-01
SIZE
A
B
C
D
E
F
G
H
1/2”
3/4”
1”
0.50
0.75
1.00
5.50
6.00
6.50
3.31
3.56
3.82
3.31
3.89
4.62
5.11
5.53
6.53
0.30
0.36
0.47
1.09
1.65
1.62
1.38
1.99
2.15
I
J
K
L
1.000
1.392
1.392
0.500
0.696
0.696
0.375
0.500
0.500
0.245
0.287
0.287
M
10-24
1/4-20
1/4-20
WT.
6
9
11
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-17
87A-900 SERIES
Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1.5” through 2.5”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
VARIATIONS AVAILABLE:
87H -
87M -
87N -
87S -
MATERIAL
ASTM A351 CF8M
ASTM A351 CF8M
ASTM A276 Type 316 or A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
Hastelloy
Monel
Nickel
304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing (3” Only)
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-11, GRAPH NO. 6
PRODUCT
NUMBER
87A-907-01
87A-908-01
87A-909-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
2.5”
1.50
2.00
2.50
7.50
8.50
9.50
3.50
4.00
4.44
4.62
5.61
6.24
6.65
8.41
8.41
0.72
0.80
0.80
2.41
3.31
3.94
3.09
4.08
4.71
D-18 REV. 12APR16
www.apollovalves.com
I
J
K
L
M
WT.
1.949
1.949
1.949
0.974
0.974
0.974
0.625
0.750
0.750
0.412
0.477
0.477
5/16-18
5/16-18
5/16-18
21
37
57
Customer Service (704) 841-6000
87A-900 SERIES
Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 3” through 6”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Pipe Handle
VARIATIONS AVAILABLE:
87H - Hastelloy
87N - Nickel
87S - 304L SS
MATERIAL
ASTM A351 CF8M
ASTM A351 CF8M
ASTM A276 Type 316 or A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
Galvanized Steel (not shown)
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing (3” Only)
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Port with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-11, GRAPH NO. 6
PRODUCT
NUMBER
87A-900-01
87A-90A-01
87A-90C-01
SIZE
A
3”
4”
6”
3.00
4.00
6.00
B
11.12
12.00
15.88
C
5.24
5.44
6.82
D
8.80
9.99
13.73
E
F
G
H
4.06
5.25
7.30
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
WT.
78
133
329
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-19
87A-900 SERIES
Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 8” through 12”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
87H - Hastelloy
87N - Nickel
87S - 304L SS
MATERIAL
ASTM A351 CF8M
ASTM A351 CF8M
ASTM A276 Type 316 or A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
RPTFE
RPTFE
ASTM A193 Grade B8M
ASTM A194 Grade 8
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet (8” Only)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-11, GRAPH NO. 6
PRODUCT
NUMBER
87A-90E-01
87A-90G-01
87A-90H-01
SIZE
8”
10”
12”
D-20 REV. 12APR16
A
B
C
D
E
8.00
10.00
12.00
19.75
22.38
25.50
9.38
10.95
12.84
12.83
18.57
20.31
9.56
11.33
13.40
F
1.00
2.31
2.31
G
10.22
12.80
14.92
www.apollovalves.com
Customer Service (704) 841-6000
87B-100 SERIES
Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 3”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Lockwasher
VARIATIONS AVAILABLE:
87H - Hastelloy
87N - Nickel
87S - 304L SS
MATERIAL
ASTM A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316 or A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS with Vinyl Grip
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
302 or 304 SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing (3” Only)
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 2
PRODUCT
NUMBER
87B-100-01
SIZE
A
B
C
D
E
F
G
3”
2.50
8.00
4.00
6.23
8.40
3.93
4.70
H
I
J
K
L
M
1.949
0.974
0.750
0.477
5/16-18
3.00
N
0.77
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
WT.
43
D-21
87B-100 SERIES
Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 4” - 10” Short Pattern
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
Adapter Screw
VARIATIONS AVAILABLE:
87H - Hastelloy
87N - Nickel
87S - 304L SS
MATERIAL
ASTM A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316 or A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
302 or 304 SS
SS
18-8 SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing (3” Only)
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 2
PRODUCT
NUMBER
87B-10A-01
87B-10C-01
87B-10E-01
87B-10G-01
SIZE
A
4”
6”
8”
10”
3.00
4.00
6.00
8.00
D-22 REV. 12APR16
B
9.00
10.50
11.50
13.00
C
4.18
5.25
5.75
6.50
D
8.80
9.99
13.61
N/A
E
F
0.50
0.50
1.00
1.00
4.75
5.94
7.63
9.50
G
H
I
J
K
5.95
7.13
9.36
11.23
2.840
2.840
4.596
4.596
1.420
1.420
2.298
2.298
1.250
1.250
2.000
2.000
0.725
0.725
1.375
1.375
www.apollovalves.com
L
3/8-16
3/8-16
3/4-10
3/4-10
Customer Service (704) 841-6000
M
WT.
4.00
6.00
8.00
10.0
72
110
210
350
87J-100 SERIES
Duplex Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5” through 2”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
OPTIONS AVAILABLE:
MATERIAL
ASTM A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276/A479 Alloy 2205 or A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
302 or 304 SS
ASTM A194 Grade 8
302 or 304 SS with Vinyl Grip
RPTFE
ASTM A276 Type 316
18-8 SS
302 or 304 SS
RPTFE
302 or 304 SS
SS, ASTM A313
VARIATIONS AVAILABLE:
87H -
87M -
87N -
87S -
Hastelloy
Monel (1.5” to 2” only)
Nickel
304L SS
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing (3” Only)
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
-ULUL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 40
PRODUCT
NUMBER
87J-107-01
87J-108-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
1.25
1.50
6.50
7.00
3.50
3.69
4.85
4.62
6.53
6.65
0.47
0.72
1.85
2.41
2.38
3.09
I
J
K
L
M
1.392
1.949
0.696
0.974
0.500
0.625
0.287
0.412
1/4-20
5/16-18
N
WT.
1.50
2.00
9
18
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-23
87J-100 SERIES
Duplex Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 2.5” through 3”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 4A
ASTM A995 4A
ASTM A276/A479 Alloy 2205 or A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
ASTM A194 Grade 8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS, ASTM A313
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
87H - Hastelloy
87N - Nickel
87S - 304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-67Cleaned For Industrial Gases
-69Drilled and Tapped Purge Port with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded 87A/88A Series (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE) 87A/88A Series
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 40
PRODUCT
NUMBER
87J-109-01
87J-100-01
SIZE
A
B
C
D
E
F
G
H
2.5”
3”
2.00
2.50
7.50
8.00
3.50
3.51
5.61
6.24
8.41
8.41
0.80
0.80
3.31
3.94
4.08
4.71
D-24 REV. 12APR16
www.apollovalves.com
I
J
K
L
M
1.949
1.949
0.974
0.974
0.750
0.750
0.477
0.477
5/16-18
5/16-18
Customer Service (704) 841-6000
N
WT.
2.50
3.00
27
34
87J-100 SERIES
Duplex Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 4” through 8”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
Pipe Handle
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 4A
ASTM A995 4A
ASTM A276/A479 Alloy 2205 or A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS, ASTM 313
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
Galvanized Steel (not Shown)
87H - Hastelloy
87N - Nickel
87S - 304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-67Cleaned For Industrial Gases
-69Drilled and Tapped Purge Ports with Plugs
-70Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE) 87A/88A Series
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 40
PRODUCT
NUMBER
87J-10A-01
87J-10C-01
87J-10E-01
SIZE
A
4”
6”
8”
3.00
4.00
6.00
B
9.00
10.50
18.00
C
4.18
4.69
9.00
D
8.80
9.99
13.73
E
F
G
H
3.88
5.13
7.00
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
N
WT.
4.00
6.00
8.00
73
117
310
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-25
87J-100 SERIES
Duplex Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 10”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 4A
ASTM A995 4A
ASTM A276/A479 Alloy 2205 or A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
RPTFE
RPTFE
ASTM A193 Grade B8M
ASTM A194 Grade 8
87H - Hastelloy
87N - Nickel
87S - 304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Port with Plugs
-704” Extended Bonnet
-77Live Loaded 87A/88A Series (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 40
PRODUCT
NUMBER
87J-10G-01
SIZE
A
10”
8.00
D-26 REV. 12APR16
B
C
D
21.00
10.37
12.83
E
F
9.18
1.00
G
H
I
J
K
10.22
4.596
2.298
2.000
1.375
www.apollovalves.com
L
3/4-10
Customer Service (704) 841-6000
M
WT.
10.00
526
87J-200 SERIES
Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2” through 1”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART (1/2” & 3/4” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Stem Nut
Lever
Stem Bearing
Stop
Body Seal
Lockwasher
Grounding Spring
Grounding Spring
PART (1” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276/A479 Alloy 2205
ASTM A276/A479 Alloy 2205
ASTM A276 Type 316
PTFE
RPTFE
300 Series Stainless Steel
300 Series Stainless Steel w/ Vinyl Grip
RPTFE
300 Series Stainless Steel
RPTFE
300 Series Stainless Steel
ASTM A313 Stainless Steel
ASTM A313 Stainless Steel
MATERIAL
ASTM A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276/A479 Alloy 2205
ASTM A276/A479 Alloy 2205
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
302 or 304 SS
316 SS
302 or 304 with Vinyl Grip
RPTFE
ASTM A276 Type 316
18-8 SS
302 or 304 SS
RPTFE
302 or 304 SS
SS
1/2” & 3/4” VALVES
87H -
87M -
87N -
87S -
Hastelloy
Monel
Nickel
304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Port with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
1” VALVE
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 40
PRODUCT
NUMBER
87J-203-01
87J-204-01
87J-205-01
SIZE
A
B
C
D
E
F
G
H
1/2”
3/4”
1”
0.50
0.75
1.00
4.25
4.62
5.00
2.06
2.18
2.32
3.31
3.89
4.62
5.11
5.53
6.53
0.30
0.36
0.47
1.09
1.65
1.62
1.41
1.99
2.15
I
J
K
L
1.00
1.392
1.392
0.500
0.696
0.696
0.375
0.500
0.500
0.245
0.287
0.287
M
10-24
1/4-20
1/4-20
WT.
5
6
7
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-27
87J-200 SERIES
Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1.5” through 2.5”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
VARIATIONS AVAILABLE:
87H -
87M -
87N -
87S -
MATERIAL
ASTM A995 4A
ASTM A995 4A
ASTM A276/A479 Alloy 2205 or A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
Hastelloy
Monel
Nickel
304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-MGGear Operator with Standard Handwheel
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 40
PRODUCT
NUMBER
87J-207-01
87J-208-01
87J-209-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
2.5”
1.50
2.00
2.50
6.50
7.00
7.50
3.00
3.04
3.34
4.62
5.61
6.24
6.65
8.41
8.41
0.72
0.80
0.80
2.41
3.31
3.94
3.09
4.08
4.71
D-28 REV. 12APR16
www.apollovalves.com
I
J
K
L
M
WT.
1.949
1.949
1.949
0.974
0.974
0.974
0.625
0.750
0.750
0.412
0.477
0.477
5/16-18
5/16-18
5/16-18
14
25
30
Customer Service (704) 841-6000
87J-200 SERIES
Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 3” through 6”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Pipe Handle
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 4A
ASTM A995 4A
ASTM A276/A479 Alloy 2205 or A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 with Vinyl Grip
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
Galvanized Steel (not shown)
87H - Hastelloy
87N - Nickel
87S - 304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 40
PRODUCT
NUMBER
87J-200-01
87J-20A-01
87J-20C-01
SIZE
A
3”
4”
6”
3.00
4.00
6.00
B
8.00
9.00
15.50
C
3.68
3.94
7.19
D
8.80
9.99
13.73
E
F
G
H
3.88
5.13
7.00
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
WT.
60
91
248
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-29
87J-200 SERIES
Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 8” through 12”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 4A
ASTM A995 4A
ASTM A276/A479 Alloy 2205 or A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
RPTFE
RPTFE
ASTM A193 Grade B8M
ASTM A194 Grade 8
87H - Hastelloy
87N - Nickel
87S - 304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet (8” Only)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 40
PRODUCT
NUMBER
87J-20E-01
87J-20G-01
87J-20H-01
SIZE
8”
10”
12”
D-30 REV. 12APR16
A
B
C
D
E
8.00
10.00
12.00
18.00
21.00
24.00
8.88
10.26
12.09
12.83
18.57
20.31
9.18
11.33
13.40
F
1.00
2.31
2.31
G
10.22
12.80
14.92
www.apollovalves.com
Customer Service (704) 841-6000
87J-700 SERIES
Duplex Stainless Steel ASME Class 300 Flanged Std. Port Ball Valve - 1.5” through 2”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
87H -
87M -
87N -
87S -
MATERIAL
ASTM A995 4A
ASTM A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276/A479 Alloy 2205
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
302 & 304 SS
ASTM A194 Grade 8
302 & 304 SS with Vinyl Grip
RPTFE
ASTM A276 Type 316
18-8 SS
302 or 304 SS
RPTFE
302 or 304 SS
SS, ASTM A313
Hastelloy
Monel
Nickel
304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14 Side Vented Ball (See Page J-2)
-15Wheel Handle, Steel
-21 UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35 PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 41
PRODUCT
NUMBER
87J-707-01A
87J-708-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
1.25
1.50
7.50
8.50
4.50
5.19
4.85
4.62
6.53
6.65
0.47
0.72
1.85
2.41
2.38
3.09
I
J
K
L
M
1.392
1.949
0.696
0.974
0.500
0.625
0.287
0.412
1/4-20
5/16-18
N
WT.
1.50
2.00
15.7
24.0
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-31
87J-700 SERIES
Duplex Stainless Steel ASME Class 300 Flanged Std. Port Ball Valve - 2.5” through 3”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 4A
ASTM A995 4A
ASTM A276/A479 Alloy 2205 or A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
ASTM A194 Grade 8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS, ASTM A313
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
87H - Hastelloy
87N - Nickel
87S - 304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 41
PRODUCT
NUMBER
87J-709-01
87J-700-01
SIZE
A
2.5”
3”
2.00
2.50
D-32 REV. 12APR16
B
9.50
11.12
C
D
E
F
G
H
4.75
5.56
5.61
6.24
8.41
8.41
0.80
0.80
3.31
3.94
4.08
4.71
www.apollovalves.com
I
J
K
L
M
1.949
1.949
0.974
0.974
0.750
0.750
0.477
0.477
5/16-18
5/16-18
Customer Service (704) 841-6000
N
WT.
2.50
3.00
39
55
87J-700 SERIES
Duplex Stainless Steel ASME Class 300 Flanged Std. Port Ball Valve - 4” through 8”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Adapter Screw
Pipe Handle
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 4A
ASTM A995 4A
ASTM A276/A479 Alloy 2205 or A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS, ASTM 313
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
Galvanized Steel (not Shown)
87H - Hastelloy
87N - Nickel
87S - 304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 41
PRODUCT
NUMBER
87J-70A-01
87J-70C-01
87J-70E-01
SIZE
A
4”
6”
8”
3.00
4.00
6.00
B
12.00
15.88
19.75
C
5.68
7.38
9.00
D
8.80
9.99
13.73
E
F
G
H
4.06
5.25
7.30
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
N
WT.
4.00
6.00
8.00
95
187
400
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-33
87J-700 SERIES
Duplex Stainless Steel ASME Class 300 Flanged Standard Port Ball Valve - 10”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 4A
ASTM A995 4A
ASTM A276/A479 Alloy 2205 or A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
RPTFE
RPTFE
ASTM A193 Grade B8M
ASTM A194 Grade 8
87H - Hastelloy
87N - Nickel
87S - 304L SS
OPTIONS AVAILABLE:
(More information in Section J)
G
H
I
J
K
10.22
4.596
2.298
2.000
1.375
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration (Less Gear Operator)
-14Side Vented Ball (See Page J2)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-77Live Loaded 87A/88A Series (Gear, Actuator)
-80Multi-Seal (Super TFE) 87A/88A Series
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 41
PRODUCT
NUMBER
87J-70G-01
SIZE
A
10”
8.00
D-34 REV. 12APR16
B
C
D
22.38
10.69
12.83
E
F
9.56
1.00
www.apollovalves.com
L
3/4-10
Customer Service (704) 841-6000
M
10.00
87J-900 SERIES
Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2” through 1”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART (1/2” & 3/4” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Stem Nut
Lever
Stem Bearing
Stop
Body Seal
Lockwasher
Grounding Spring
Grounding Spring
PART (1” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276/A479 Alloy 2205
ASTM A276/A479 Alloy 2205
ASTM A276 Type 316
PTFE
RPTFE
300 Series Stainless Steel
300 Series Stainless Steel w/ Vinyl Grip
RPTFE
300 Series Stainless Steel
RPTFE
300 Series Stainless Steel
ASTM A313 Stainless Steel
ASTM A313 Stainless Steel
MATERIAL
ASTM A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276/A479 Alloy 2205
ASTM A276/A479 Alloy 2205
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
302 or 304 SS
316 SS
302 or 304 with Vinyl Grip
RPTFE
ASTM A276 Type 316
18-8 SS
302 or 304 SS
RPTFE
302 or 304 SS
SS, ASTM A313
1/2” & 3/4” VALVES
87H -
87M -
87N -
87S -
Hastelloy
Monel
Nickel
304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Port with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
1” VALVE
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 41
PRODUCT
NUMBER
87J-903-01
87J-904-01
87J-905-01
SIZE
A
B
C
D
E
F
G
H
1/2”
3/4”
1”
0.50
0.75
1.00
5.50
6.00
6.50
3.31
3.56
3.82
3.31
3.89
4.62
5.11
5.53
6.53
0.30
0.36
0.47
1.09
1.65
1.62
1.38
1.99
2.15
I
J
K
L
1.000
1.392
1.392
0.500
0.696
0.696
0.375
0.500
0.500
0.245
0.287
0.287
M
10-24
1/4-20
1/4-20
WT.
6
9
11
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-35
87J-900 SERIES
Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1.5” through 2.5”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 4A
ASTM A995 4A
ASTM A276/A479 Alloy 2205 or A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276/A479 Alloy 2205
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS, ASTM A313
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
87H -
87M -
87N -
87S -
Hastelloy
Monel
Nickel
304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing (3” Only)
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 41
PRODUCT
NUMBER
87J-907-01
87J-908-01
87J-909-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
2.5”
1.50
2.00
2.50
7.50
8.50
9.50
3.50
4.00
4.44
4.62
5.61
6.24
6.65
8.41
8.41
0.72
0.80
0.80
2.41
3.31
3.94
3.09
4.08
4.71
D-36 REV. 12APR16
www.apollovalves.com
I
J
K
L
M
WT.
1.949
1.949
1.949
0.974
0.974
0.974
0.625
0.750
0.750
0.412
0.477
0.477
5/16-18
5/16-18
5/16-18
21
37
57
Customer Service (704) 841-6000
87J-900 SERIES
Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 3” through 6”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Pipe Handle
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 4A
ASTM A995 4A
ASTM A276/A479 Alloy 2205 or A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276/A479 Alloy 2205
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS, ASTM A313
ASTM A193 Grade B8M
ASTM A194 Grade 8
Galvanized Steel (not shown)
87H - Hastelloy
87N - Nickel
87S - 304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing (3” Only)
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Port with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 41
PRODUCT
NUMBER
87J-900-01
87J-90A-01
87J-90C-01
SIZE
A
3”
4”
6”
3.00
4.00
6.00
B
11.12
12.00
15.88
C
5.24
5.44
6.82
D
8.80
9.99
13.73
E
F
G
H
4.06
5.25
7.30
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
WT.
78
133
329
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-37
87J-900 SERIES
Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 8” through 12”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 4A
ASTM A995 4A
ASTM A276/A479 Alloy 2205 or A995 4A
ASTM A276/A479 Alloy 2205
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
RPTFE
RPTFE
ASTM A193 Grade B8M
ASTM A194 Grade 8
87H - Hastelloy
87N - Nickel
87S - 304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet (8” Only)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 41
PRODUCT
NUMBER
87J-90E-01
87J-90G-01
87J-90H-01
SIZE
8”
10”
12”
D-38 REV. 12APR16
A
B
C
D
E
8.00
10.00
12.00
19.75
22.38
25.50
9.38
10.95
12.84
12.83
18.57
20.31
9.56
11.33
13.40
F
1.00
2.31
2.31
G
10.22
12.80
14.92
www.apollovalves.com
Customer Service (704) 841-6000
87K-100 SERIES
Super Duplex Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5” through 2”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
87H -
87M -
87N -
87S -
MATERIAL
ASTM A995 6A
ASTM A276/A479 Alloy 2507
ASTM A276/A479 Alloy 2507
ASTM A276/A479 Alloy 2507
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
302 or 304 SS
316 SS
302 or 304 SS with Vinyl Grip
RPTFE
ASTM A276 Type 316
18-8 SS
302 or 304 SS
RPTFE
302 or 304 SS
SS
Hastelloy
Monel (1.5” to 2” only)
Nickel
304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Port with Plug
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE) 87A/88A Series
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 41
PRODUCT
NUMBER
87K-107-01
87K-108-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
1.25
1.50
6.50
7.00
3.50
3.69
4.85
4.62
6.53
6.65
0.47
0.72
1.85
2.41
2.38
3.09
I
J
K
L
M
1.392
1.949
0.696
0.974
0.500
0.625
0.287
0.412
1/4-20
5/16-18
N
WT.
1.50
2.00
9
18
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-39
87K-100 SERIES
Super Duplex Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 2.5” through 3”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 6A
ASTM A995 6A
ASTM A276/A479 Alloy 2507 or A995 6A
ASTM A276/A479 Alloy 2507
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
87H - Hastelloy
87N - Nickel
87S - 304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-67Cleaned For Industrial Gases
-69Drilled and Tapped Purge Port with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded 87A/88A Series (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE) 87A/88A Series
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 40
PRODUCT
NUMBER
87K-109-01
87K-100-01
SIZE
A
B
C
D
E
F
G
H
2.5”
3”
2.00
2.50
7.50
8.00
3.50
3.51
5.61
6.24
8.41
8.41
0.80
0.80
3.31
3.94
4.08
4.71
D-40 REV. 12APR16
www.apollovalves.com
I
J
K
L
M
1.949
1.949
0.974
0.974
0.750
0.750
0.477
0.477
5/16-18
5/16-18
Customer Service (704) 841-6000
N
WT.
2.50
3.00
27
34
87K-100 SERIES
Super Duplex Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 4” through 8”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
Pipe Handle
OPTIONS
VARIATIONS
AVAILABLE:
AVAILABLE:
(More information in Section J)
MATERIAL
ASTM A995 6A
ASTM A995 6A
ASTM A995 6A or A276/A479 Alloy 2507
ASTM A276/A479 Alloy 2507
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
Galvanized Steel (not Shown)
• Minimum
quantities apply
87H
- Hastelloy
•87N
To specify
an option, replace the “01” standard suffix with the suffix of the option.
- Nickel
• To specify
multiple
87S
- 304L
SS options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-67Cleaned For Industrial Gases
-69Drilled and Tapped Purge Ports with Plugs
-70Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE) 87A/88A Series
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 40
PRODUCT
NUMBER
87K-10A-01
87K-10C-01
87K-10E-01
SIZE
A
4”
6”
8”
3.00
4.00
6.00
B
9.00
10.50
18.00
C
4.18
4.69
9.00
D
8.80
9.99
13.73
E
F
G
H
3.88
5.13
7.00
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
N
WT.
4.00
6.00
8.00
73
117
310
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-41
87K-100 SERIES
Super Duplex Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 10”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 6A
ASTM A995 6A
ASTM A276/A479 Alloy 2507 or A995 6A
ASTM A276 A995 6A
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
RPTFE
RPTFE
ASTM A193 Grade B8M
ASTM A194 Grade 8
87H - Hastelloy
87N - Nickel
87S - 304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Port with Plugs
-704” Extended Bonnet
-77Live Loaded 87A/88A Series (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 40
PRODUCT
NUMBER
87K-10G-01
SIZE
A
10”
8.00
D-42 REV. 12APR16
B
C
D
21.00
10.37
12.83
E
F
9.18
1.00
G
H
I
J
K
10.22
4.596
2.298
2.000
1.375
www.apollovalves.com
L
3/4-10
Customer Service (704) 841-6000
M
WT.
10.00
526
87K-200 SERIES
Super Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2” through 1”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART (1/2” & 3/4” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Stem Nut
Lever
Stem Bearing
Stop
Body Seal
Lockwasher
Grounding Spring
Grounding Spring
PART (1” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 6A
ASTM A276/A479 Alloy 2507
ASTM A276/A479 Alloy 2507
ASTM A276/ A479 Alloy 2507
ASTM A276 Type 316
PTFE
RPTFE
300 Series Stainless Steel
300 Series Stainless Steel w/ Vinyl Grip
RPTFE
300 Series Stainless Steel
RPTFE
300 Series Stainless Steel
ASTM A313 Stainless Steel
ASTM A313 Stainless Steel
MATERIAL
ASTM A995 6A
ASTM A276 /A479 Alloy 2507
ASTM A276 /A479 Alloy 2507
ASTM A276 /A479 Alloy 2507
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
302 or 304 SS
316 SS
302 or 304 with Vinyl Grip
RPTFE
ASTM A276 Type 316
18-8 SS
302 or 304 SS
RPTFE
302 or 304 SS
SS, ASTM A313
1/2” & 3/4” VALVES
87H -
87M -
87N -
87S -
Hastelloy
Monel
Nickel
304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Port with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
1” VALVE
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 40
PRODUCT
NUMBER
87K-203-01
87K-204-01
87K-205-01
SIZE
A
B
C
D
E
F
G
H
1/2”
3/4”
1”
0.50
0.75
1.00
4.25
4.62
5.00
2.06
2.18
2.32
3.31
3.89
4.62
5.11
5.53
6.53
0.30
0.36
0.47
1.09
1.65
1.62
1.41
1.99
2.15
I
J
K
L
1.00
1.392
1.392
0.500
0.696
0.696
0.375
0.500
0.500
0.245
0.287
0.287
M
10-24
1/4-20
1/4-20
WT.
5
6
7
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-43
87K-200 SERIES
Super Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1.5” through 2.5”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 6A
ASTM A995 6A
ASTM A276/A479 Alloy 2507 or A995 6A
ASTM A276/ A479 Alloy 2507
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
87H -
87M -
87N -
87S -
Hastelloy
Monel
Nickel
304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 40
PRODUCT
NUMBER
87K-207-01
87K-208-01
87K-209-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
2.5”
1.50
2.00
2.50
6.50
7.00
7.50
3.00
3.04
3.34
4.62
5.61
6.24
6.65
8.41
8.41
0.72
0.80
0.80
2.41
3.31
3.94
3.09
4.08
4.71
D-44 REV. 12APR16
www.apollovalves.com
I
J
K
L
M
WT.
1.949
1.949
1.949
0.974
0.974
0.974
0.625
0.750
0.750
0.412
0.477
0.477
5/16-18
5/16-18
5/16-18
14
25
30
Customer Service (704) 841-6000
87K-200 SERIES
Super Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 3” through 6”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Pipe Handle
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 6A
ASTM A995 6A
ASTM A276/A479 Alloy 2507 or A995 6A
ASTM A276/A479 Alloy 2507
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 with Vinyl Grip
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
Galvanized Steel (not shown)
87H - Hastelloy
87N - Nickel
87S - 304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 40
PRODUCT
NUMBER
87K-200-01
87K-20A-01
87K-20C-01
SIZE
A
3”
4”
6”
3.00
4.00
6.00
B
8.00
9.00
15.50
C
3.68
3.94
7.19
D
8.80
9.99
13.73
E
F
G
H
3.88
5.13
7.00
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
WT.
60
91
248
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-45
87K-200 SERIES
Super Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 8” through 12”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
87H - Hastelloy
87N - Nickel
87S - 304L SS
MATERIAL
ASTM A995 6A
ASTM A995 6A
ASTM A276/A479 Alloy or A995 6A
ASTM A276/A479 Alloy 2507
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
RPTFE
RPTFE
ASTM A193 Grade B8M
ASTM A194 Grade 8
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet (8” Only)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 40
PRODUCT
NUMBER
87K-20E-01
87K-20G-01
87K-20H-01
SIZE
8”
10”
12”
D-46 REV. 12APR16
A
B
C
D
E
8.00
10.00
12.00
18.00
21.00
24.00
8.88
10.26
12.09
12.83
18.57
20.31
9.18
11.33
13.40
F
1.00
2.31
2.31
G
10.22
12.80
14.92
www.apollovalves.com
Customer Service (704) 841-6000
87K-700 SERIES
Super Duplex Stainless Steel ASME Class 300 Flanged Std. Port Ball Valve - 1.5” through 2”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
87H -
87M -
87N -
87S -
MATERIAL
ASTM A995 6A
ASTM A276/A479 Alloy 2507
ASTM A276/A479 Alloy 2507
ASTM A276/A479 Alloy 2507
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
302 & 304 SS
316 SS
302 & 304 SS with Vinyl Grip
RPTFE
ASTM A276 Type 316
18-8 SS
302 or 304 SS
RPTFE
302 or 304 SS
SS
Hastelloy
Monel
Nickel
304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14 Side Vented Ball (See Page J-2)
-15Wheel Handle, Steel
-21 UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35 PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 41
PRODUCT
NUMBER
87K-707-01A
87K-708-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
1.25
1.50
7.50
8.50
4.50
5.19
4.85
4.62
6.53
6.65
0.47
0.72
1.85
2.41
2.38
3.09
I
J
K
L
M
1.392
1.949
0.696
0.974
0.500
0.625
0.287
0.412
1/4-20
5/16-18
N
WT.
1.50
2.00
15.7
24.0
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-47
87K-700 SERIES
Super Duplex Stainless Steel ASME Class 300 Flanged Std. Port Ball Valve - 2.5” through 3”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 6A
ASTM A995 6A
ASTM A276/A479 Alloy 2507 or A995 6A
ASTM A276/A479 Alloy 2507
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 with Vinyl Grip
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
87H - Hastelloy
87N - Nickel
87S - 304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 41
PRODUCT
NUMBER
87K-709-01
87K-700-01
SIZE
A
2.5”
3”
2.00
2.50
D-48 REV. 12APR16
B
9.50
11.12
C
D
E
F
G
H
4.75
5.56
5.61
6.24
8.41
8.41
0.80
0.80
3.31
3.94
4.08
4.71
www.apollovalves.com
I
J
K
L
M
1.949
1.949
0.974
0.974
0.750
0.750
0.477
0.477
5/16-18
5/16-18
Customer Service (704) 841-6000
N
WT.
2.50
3.00
39
55
87K-700 SERIES
Super Duplex Stainless Steel ASME Class 300 Flanged Std. Port Ball Valve - 4” through 8”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Adapter Screw
Pipe Handle
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 6A
ASTM A276/A479 Alloy 2507
ASTM A276/A479 Alloy 2507 or A995 6A
ASTM A276/A479 Alloy 2507
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
18-8 SS
Galvanized Steel (not shown)
87H - Hastelloy
87N - Nickel
87S - 304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 41
PRODUCT
NUMBER
87K-70A-01
87K-70C-01
87K-70E-01
SIZE
A
4”
6”
8”
3.00
4.00
6.00
B
12.00
15.88
19.75
C
5.68
7.38
9.00
D
8.80
9.99
13.73
E
F
G
H
4.06
5.25
7.30
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
N
WT.
4.00
6.00
8.00
95
187
400
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-49
87K-700 SERIES
Super Duplex Stainless Steel ASME Class 300 Flanged Standard Port Ball Valve - 10”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
87H - Hastelloy
87N - Nickel
87S - 304L SS
MATERIAL
ASTM A995 6A
ASTM A995 6A
ASTM A276/A479 Alloy 2507
ASTM A276/A479 Alloy 2507
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
RPTFE
RPTFE
ASTM A193 Grade B8M
ASTM A194 Grade 8
OPTIONS AVAILABLE:
(More information in Section J)
G
H
I
J
K
10.22
4.596
2.298
2.000
1.375
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration (Less Gear Operator)
-14Side Vented Ball (See Page J2)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-77Live Loaded 87A/88A Series (Gear, Actuator)
-80Multi-Seal (Super TFE) 87A/88A Series
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 41
PRODUCT
NUMBER
87K-70G-01
SIZE
A
10”
8.00
D-50 REV. 12APR16
B
C
D
22.38
10.69
12.83
E
F
9.56
1.00
www.apollovalves.com
L
3/4-10
Customer Service (704) 841-6000
M
10.00
87K-900 SERIES
Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2” through 1”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART (1/2” & 3/4” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Stem Nut
Lever
Stem Bearing
Stop
Body Seal
Lockwasher
Grounding Spring
Grounding Spring
PART (1” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 6A
ASTM A276/A479 Alloy 2507
ASTM A276/A479 Alloy 2507
ASTM A276/A479 Alloy 2507
ASTM A276 Type 316
PTFE
RPTFE
300 Series Stainless Steel
300 Series Stainless Steel w/ Vinyl Grip
RPTFE
300 Series Stainless Steel
RPTFE
300 Series Stainless Steel
ASTM A313 Stainless Steel
ASTM A313 Stainless Steel
MATERIAL
ASTM A351 CF8M
ASTM A276 Type 316
ASTM A276 Type 316
ASTM A276 Type 316
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
302 or 304 SS
316 SS
302 or 304 with Vinyl Grip
RPTFE
ASTM A276 Type 316
18-8 SS
302 or 304 SS
RPTFE
302 or 304 SS
SS
1/2” & 3/4” VALVES
87H -
87M -
87N -
87S -
Hastelloy
Monel
Nickel
304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Port with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
1” VALVE
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 41
PRODUCT
NUMBER
87K-903-01
87K-904-01
87K-905-01
SIZE
A
B
C
D
E
F
G
H
1/2”
3/4”
1”
0.50
0.75
1.00
5.50
6.00
6.50
3.31
3.56
3.82
3.31
3.89
4.62
5.11
5.53
6.53
0.30
0.36
0.47
1.09
1.65
1.62
1.38
1.99
2.15
I
J
K
L
1.000
1.392
1.392
0.500
0.696
0.696
0.375
0.500
0.500
0.245
0.287
0.287
M
10-24
1/4-20
1/4-20
WT.
6
9
11
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-51
87K-900 SERIES
Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1.5”through 2.5”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 6A
ASTM A995 6A
ASTM A276/A479 Alloy 2507 or A995 6A
ASTM A276/A479 Alloy 2507
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
87H -
87M -
87N -
87S -
Hastelloy
Monel
Nickel
304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing (3” Only)
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 41
PRODUCT
NUMBER
87K-907-01
87K-908-01
87K-909-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
2.5”
1.50
2.00
2.50
7.50
8.50
9.50
3.50
4.00
4.44
4.62
5.61
6.24
6.65
8.41
8.41
0.72
0.80
0.80
2.41
3.31
3.94
3.09
4.08
4.71
D-52 REV. 12APR16
www.apollovalves.com
I
J
K
L
M
WT.
1.949
1.949
1.949
0.974
0.974
0.974
0.625
0.750
0.750
0.412
0.477
0.477
5/16-18
5/16-18
5/16-18
21
37
57
Customer Service (704) 841-6000
87K-900 SERIES
Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 3” through 6”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Pipe Handle
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 6A
ASTM A995 6A
ASTM A276/A479 Alloy 2507 or A995 6A
ASTM A276/A479 Alloy 2507
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
Galvanized Steel (not shown)
87H - Hastelloy
87N - Nickel
87S - 304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing (3” Only)
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Port with Plugs
-704” Extended Bonnet
-73316 SS Spiral Wound Gaskets w/PTFE Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 41
PRODUCT
NUMBER
87K-900-01
87K-90A-01
87K-90C-01
SIZE
A
3”
4”
6”
3.00
4.00
6.00
B
11.12
12.00
15.88
C
5.24
5.44
6.82
D
8.80
9.99
13.73
E
F
G
H
4.06
5.25
7.30
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
WT.
78
133
329
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-53
87K-900 SERIES
Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 8” through 12”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
MATERIAL
ASTM A995 6A
ASTM A995 6A
ASTM A276/A479 Alloy 2507 or A995 6A
ASTM A276/A479 Alloy 2507
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
RPTFE
RPTFE
ASTM A193 Grade B8M
ASTM A194 Grade 8
87H - Hastelloy
87N - Nickel
87S - 304L SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (fire safe “by design”)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet (8” Only)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-28, GRAPH NO. 41
PRODUCT
NUMBER
87K-90E-01
87K-90G-01
87K-90H-01
SIZE
8”
10”
12”
D-54 REV. 12APR16
A
B
C
D
E
8.00
10.00
12.00
19.75
22.38
25.50
9.38
10.95
12.84
12.83
18.57
20.31
9.56
11.33
13.40
F
1.00
2.31
2.31
G
10.22
12.80
14.92
www.apollovalves.com
Customer Service (704) 841-6000
88A-100 SERIES
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5” through 2”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
PART
Body
Retainer
3
Ball
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
MATERIAL
ASTM A216 WCB
ASTM A108 Type 1215
ASTM A108, Carbon Steel, Chrome Plated
or ASTM A276, Type 316 Stainless Steel
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
302 or 304 SS
316 SS
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
302 or 304 SS
SS
88A-140 Series (316 SS Ball & Stem)
88A-130 Series (Ni-Cu Ball & Stem)
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-10SS Lever and Nut
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 5th edition, ISO 10497-5:2004)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-35-38-49-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-TC-TD-UL-
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Port with Plug
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 1
PRODUCT
NUMBER
88A-107-01A
88A-108-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
1.25
1.50
6.50
7.00
3.50
3.69
4.85
4.62
6.53
6.65
0.47
0.72
1.85
2.41
2.38
3.09
I
J
K
L
M
1.392
1.949
0.696
0.974
0.500
0.625
0.287
0.412
1/4-20
5/16-18
N
WT.
1.50
2.00
9
18
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-55
88A-100 SERIES
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 2.5” through 3”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
PART
Body
Retainer
3
Ball
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
VARIATIONS AVAILABLE:
88A-140 Series (316 SS Ball & Stem)
88A-130 Series (Ni-Cu Ball & Stem)
MATERIAL
ASTM A216 WCB
ASTM A216 WCB
ASTM A108 Type 1215 or
ASTM A216 WCB Chrome Plated
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
302 or 304 SS
ASTM A194 Grade 8
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
SS
ASTM A193 Grade B7
ASTM A194 Grade 2H
302 or 304 SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-10SS Lever and Nut
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
SS External Trim
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Port with Plugs
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 1
PRODUCT
NUMBER
88A-109-01
88A-100-01
SIZE
A
B
C
D
E
F
G
H
2.5”
3”
2.00
2.50
7.50
8.00
3.50
3.51
5.61
6.24
8.41
8.41
0.80
0.80
3.31
3.94
4.08
4.71
D-56 REV. 29JUN16
www.apollovalves.com
I
J
K
L
M
1.949
1.949
0.974
0.974
0.750
0.750
0.477
0.477
5/16-18
5/16-18
Customer Service (704) 841-6000
N
WT.
2.50
3.00
27
34
88A-100 SERIES
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 4” through 8”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
PART
Body
Retainer
3
Ball
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adaptor Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Adapter Screw
Pipe Handle
VARIATIONS AVAILABLE:
88A-140 Series (316 SS Ball & Stem)
88A-130 Series (Ni-Cu Ball & Stem)
MATERIAL
ASTM A216 WCB
ASTM A216 WCB
ASTM A108 Type 1215 or
ASTM A216 WCB Chrome Plated
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
316 SS
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
SS
ASTM A193 Grade B7
ASTM A194 Grade 2H
18-8 SS
Galvanized Steel (not shown)
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Fire Safe - graphite packing & seals
-24(API 607, 5th edition, ISO 10497-5:2004) 4” & 6”
(API 607, 6th edition, ISO 10497:2010) 8”
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-35-49-59-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
PTFE Seats and Seals
No Lubrication. Assembled Dry.
SS External Trim
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 1
PRODUCT
NUMBER
88A-10A-01
88A-10C-01
88A-10E-01
SIZE
A
4”
6”
8”
3.00
4.00
6.00
B
9.00
10.50
18.00
C
4.18
4.69
9.00
D
8.80
9.99
13.73
E
F
G
H
3.88
5.13
7.00
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
N
WT.
4.00
6.00
8.00
73
117
310
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-57
88A-100 SERIES
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 10”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
PART
Body
Retainer
3
Ball
4
5
6
7
8
9
10
11
12
13
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
88A-130 Series (Ni-Cu Ball & Stem)
88A-140 Series (316 SS Ball & Stem)
MATERIAL
ASTM A216 WCB
ASTM A216 WCB
ASTM A108 Type 1215 or A216 WCB
Chrome Plated
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
RPTFE
RPTFE
ASTM A193 Grade B7
ASTM A194 Grade 2H
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 5th edition, ISO 10497-5:2004)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-35-49-65-67-69-70-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
PTFE Seats and Seals
No Lubrication. Assembled Dry.
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Port with Plugs
4” Extended Bonnet
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 1
PRODUCT
NUMBER
88A-10G-01
SIZE
A
10”
8.00
D-58 REV. 29JUN16
B
C
D
21.00
10.37
12.83
E
F
9.18
1.00
G
H
I
J
K
10.22
4.596
2.298
2.000
1.375
www.apollovalves.com
L
3/4-10
Customer Service (704) 841-6000
M
10.00
88A-200 SERIES
Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2” through 1”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART (1/2”& 3/4” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Stem Nut
Lever
Stem Bearing
Stop
Body Seal
Lock Washer
Grounding Spring
Grounding Spring
PART (1” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
88A-240 Series (316 SS Ball & Stem)
88A-230 Series (Ni-Cu Ball & Stem)
MATERIAL
ASTM A216 WCB
ASTM A108 Type 1215
ASTM A108 Type 1215
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
300 Series Stainless Steel
300 Series Stainless Steel w/Vinyl Grip
RPTFE
300 Series Stainless Steel
RPTFE
300 Series Stainless Steel
ASTM A313 Stainless Steel
ASTM A313 Stainless Steel
MATERIAL
ASTM A216 WCB
ASTM A108 Type 1215
ASTM A108 Type 1215 Chrome Plated
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
302 or 304 SS
316 SS
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
302 or 304 SS
SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-10SS Lever and Nut
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 5th edition, ISO 10497-5:2004)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-35-38-49-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-TC-TD-UL-
1/2” & 3/4” VALVES
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Port with Plug
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
1” VALVE
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 1
PRODUCT
NUMBER
88A-203-01
88A-204-01
88A-205-01
SIZE
A
B
C
D
E
F
G
H
1/2”
3/4”
1”
0.50
0.75
1.00
4.25
4.62
5.00
2.06
2.18
2.32
3.31
3.89
4.62
5.11
5.53
6.53
0.30
0.36
0.47
1.09
1.65
1.62
1.41
1.99
2.15
I
J
K
L
1.002
1.392
1.392
0.501
0.696
0.696
0.375
0.500
0.500
0.245
0.287
0.287
M
10-24
1/4-20
1/4-20
WT.
5
6
7
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-59
88A-200 SERIES
Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 1.5” through 2.5”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
PART
Body
Retainer
3
Ball
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
VARIATIONS AVAILABLE:
88A-240 Series (316 SS Ball & Stem)
88A-230 Series (Ni-Cu Ball & Stem)
MATERIAL
ASTM A216 WCB
ASTM A216 WCB
ASTM A108 Type 1215 or
ASTM A216 WCB Chrome Plated
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
302 & 304 SS
ASTM A194 Grade 8l
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
SS
ASTM A193 Grade B7
ASTM A194 Grade 2H
302 or 304 SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-10SS Lever and Nut
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-15Wheel Handle, Steel
-21UHMWPE Seats
Fire Safe - graphite packing & seals
-24(API 607, 5th edition, ISO 10497-5:2004) 1.5” & 2”
(API 607, 6th edition, ISO 10497:2010) 2.5”
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
SS External Trim
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 1
PRODUCT
NUMBER
88A-207-01
88A-208-01
88A-209-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
2.5”
1.50
2.00
2.50
6.50
7.00
7.50
3.00
3.04
3.34
4.62
5.61
6.24
6.65
8.41
8.41
0.72
0.80
0.80
2.41
3.31
3.94
3.09
4.08
4.71
D-60 REV. 29JUN16
www.apollovalves.com
I
J
K
L
M
WT.
1.949
1.949
1.949
0.974
0.974
0.974
0.625
0.750
0.750
0.412
0.477
0.477
5/16-18
5/16-18
5/16-18
14
25
30
Customer Service (704) 841-6000
88A-200 SERIES
Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 3” through 6”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
PART
Body
Retainer
3
Ball
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Pipe Handle
VARIATIONS AVAILABLE:
88A-240 Series (316 SS Ball & Stem)
88A-230 Series (Ni-Cu Ball & Stem)
MATERIAL
ASTM A216 WCB
ASTM A216 WCB
ASTM A108 Type 1215 or A216 WCB
Chrome Plated
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
316 SS
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
SS
ASTM A193 Grade B7
ASTM A194 Grade 2H
Galvanized Steel (not shown)
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
SS External Trim
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Port with Plug
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 1
PRODUCT
NUMBER
88A-200-01
88A-20A-01
88A-20C-01
SIZE
A
3”
4”
6”
3.00
4.00
6.00
B
8.00
9.00
15.50
C
3.68
3.94
7.19
D
8.80
9.99
13.73
E
F
G
H
3.88
5.13
7.00
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
WT.
60
91
248
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-61
88A-200 SERIES
Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 8” through 12”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
PART
Body
Retainer
3
Ball
4
5
6
7
8
9
10
11
12
13
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
88A-230 Series (Ni-Cu Ball & Stem)
88A-240 Series (316 SS Ball & Stem)
MATERIAL
ASTM A216 WCB
ASTM A216 WCB
ASTM A108 Type 1215 or A216 WCB
Chrome Plated
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
RPTFE
RPTFE
ASTM A193 Grade B7
ASTM A194 Grade 2H
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-35-49-65-67-69-70-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
PTFE Seats and Seals
No Lubrication. Assembled Dry.
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned for Industrial Gas - CS Valves
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet (8” Only)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 1
PRODUCT
NUMBER
88A-20E-01
88A-20G-01
88A-20H-01
SIZE
8”
10”
12”
D-62 REV. 29JUN16
A
B
C
D
E
8.00
10.00
12.00
18.00
21.00
24.00
8.88
10.26
12.09
12.83
18.57
20.31
9.18
11.33
13.40
F
1.00
2.31
2.31
G
10.22
12.80
14.92
www.apollovalves.com
Customer Service (704) 841-6000
88A-700 SERIES
Carbon Steel ASME Class 300 Flanged Std. Port Ball Valve - 1.5” through 2”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
PART
Body
Retainer
3
Ball
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
MATERIAL
ASTM A216 WCB
ASTM A108 Type 1215
ASTM A108, Carbon Steel, Chrome Plated
or ASTM A276, Type 316 Stainless Steel
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
302 & 304 SS
316 SS
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
302 or 304 SS
SS
88A-740 Series (316 SS Ball & Stem)
88A-730 Series (Ni-Cu Ball & Stem)
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-10SS Lever and Nut
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 5th edition, ISO 10497-5:2004)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-35-38-49-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-TC-TD-UL-
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-11, GRAPH NO. 5
PRODUCT
NUMBER
88A-707-01
88A-708-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
1.25
1.50
7.50
8.50
4.50
5.19
4.85
4.62
6.53
6.65
0.47
0.72
1.85
2.41
2.38
3.09
I
J
K
L
M
1.392
1.949
0.696
0.974
0.500
0.625
0.287
0.412
1/4-20
5/16-18
N
WT.
1.50
2.00
16
24
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-63
88A-700 SERIES
Carbon Steel ASME Class 300 Flanged Std. Port Ball Valve - 2.5” through 3”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
PART
Body
Retainer
3
Ball
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
VARIATIONS AVAILABLE:
88A-740 Series (316 SS Ball & Stem)
88A-730 Series (Ni-Cu Ball & Stem)
MATERIAL
ASTM A216 WCB
ASTM A216 WCB
ASTM A108 Type 1215 or A216 WCB
Chrome Plated
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
302 or 304 SS
ASTM A194 Grade 8
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
SS
ASTM A193 Grade B7
ASTM A194 Grade 2H
302 or 304 SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-10SS Lever and Nut
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
SS External Trim
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Port with Plug
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-11, GRAPH NO. 5
PRODUCT
NUMBER
88A-709-01
88A-700-01
SIZE
A
2.5”
3”
2.00
2.50
D-64 REV. 29JUN16
B
9.50
11.12
C
D
E
F
G
H
4.75
5.56
5.61
6.24
8.41
8.41
0.80
0.80
3.31
3.94
4.08
4.71
www.apollovalves.com
I
J
K
L
M
1.949
1.949
0.974
0.974
0.750
0.750
0.477
0.477
5/16-18
5/16-18
Customer Service (704) 841-6000
N
WT.
2.50
3.00
39
55
88A-700 SERIES
Carbon Steel ASME Class 300 Flanged Std. Port Ball Valve - 4” through 8”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
PART
Body
Retainer
3
Ball
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Adapter Screw
Pipe Handle
VARIATIONS AVAILABLE:
88A-740 Series (316 SS Ball & Stem)
88A-730 Series (Ni-Cu Ball & Stem)
MATERIAL
ASTM A216 WCB
ASTM A216 WCB
ASTM A108 Type 1215 or A216 WCB
Chrome Plated
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
316 SS
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
SS
ASTM A193 Grade B7
ASTM A194 Grade 2H
316 SS
Galvanized Steel (not shown)
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Fire Safe - graphite packing & seals
-24(API 607, 5th edition, ISO 10497-5:2004) 4” & 6”
(API 607, 6th edition, ISO 10497:2010) 8”
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-35-49-59-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
PTFE Seats and Seals
No Lubrication. Assembled Dry.
SS External Trim
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-11, GRAPH NO. 5
PRODUCT
NUMBER
88A-70A-01
88A-70C-01
88A-70E-01
SIZE
A
4”
6”
8”
3.00
4.00
6.00
B
12.00
15.88
19.75
C
5.68
7.38
9.00
D
8.80
9.99
13.73
E
F
G
H
4.06
5.25
7.30
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
N
WT.
4.00
6.00
8.00
95
187
400
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-65
88A-700 SERIES
Carbon Steel ASME Class 300 Flanged Std. Port Ball Valve - 10”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
PART
Body
Retainer
3
Ball
4
5
6
7
8
9
10
11
12
13
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
88A-730 Series (Ni-Cu Ball & Stem)
88A-740 Series (316 SS Ball & Stem)
MATERIAL
ASTM A216 WCB
ASTM A216 WCB
ASTM A108 Type 1215 or A216 WCB
Chrome Plated
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
RPTFE
RPTFE
ASTM A193 Grade B7
ASTM A194 Grade 2H
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 5th edition, ISO 10497-5:2004)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-35-49-65-67-69-70-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
PTFE Seats and Seals
No Lubrication. Assembled Dry.
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Port with Plugs
4” Extended Bonnet
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-11, GRAPH NO. 5
PRODUCT
NUMBER
88A-70G-01
SIZE
10”
D-66 REV. 29JUN16
A
8.00
B
C
D
22.38
10.69
12.83
E
F
9.56
1.00
G
H
I
J
K
10.22
4.596
2.298
2.000
1.375
www.apollovalves.com
L
3/4-10
M
10.00
Customer Service (704) 841-6000
88A-900 SERIES
Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2” through 1”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART (1/2”& 3/4” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Stem Nut
Lever
Stem Bearing
Stop
Body Seal
Lock Washer
Grounding Spring
Grounding Spring
PART (1” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
88A-940 Series (316 SS Ball & Stem)
88A-930 Series (Ni-Cu Ball & Stem)
MATERIAL
ASTM A216 WCB
ASTM A108 Type 1215
ASTM A108 Type 1215
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
300 Series Stainless Steel
300 Series Stainless Steel w/Vinyl Grip
RPTFE
300 Series Stainless Steel
RPTFE
300 Series Stainless Steel
ASTM A313 Stainless Steel
ASTM A313 Stainless Steel
MATERIAL
ASTM A216 WCB
ASTM A108 Type 1215
ASTM A108 Type 1215 Chrome Plated
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
302 or 304 SS
316 SS
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
302 or 304 SS
SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-10SS Lever and Nut
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 5th edition, ISO 10497-5:2004)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-35-38-49-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-TC-TD-UL-
1/2” & 3/4” VALVES
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Port with Plug
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
1” VALVE
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-11, GRAPH NO. 5
PRODUCT
NUMBER
88A-903-01
88A-904-01
88A-905-01
SIZE
A
B
C
D
E
F
G
H
1/2”
3/4”
1”
0.50
0.75
1.00
5.50
6.00
6.50
3.31
3.56
3.82
3.31
3.89
4.62
5.11
5.53
6.53
0.30
0.36
0.47
1.09
1.65
1.62
1.38
1.99
2.15
I
J
K
L
1.000
1.392
1.392
0.500
0.696
0.696
0.375
0.500
0.500
0.245
0.287
0.287
M
10-24
1/4-20
1/4-20
WT.
7.0
9.0
10.5
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-67
88A-900 SERIES
Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1.5” through 2.5”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
PART
Body
Retainer
3
Ball
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
VARIATIONS AVAILABLE:
88A-940 Series (316 SS Ball & Stem)
88A-930 Series (Ni-Cu Ball & Stem)
MATERIAL
ASTM A216 WCB
ASTM A216 WCB
ASTM A108 Type 1215 or
ASTM A216 WCB Chrome Plated
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
302 & 304 SS
ASTM A194 Grade 8l
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
SS
ASTM A193 Grade B7
ASTM A194 Grade 2H
302 or ­304 SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-15Wheel Handle, Steel
-21UHMWPE Seats
Fire Safe - graphite packing & seals
-24(API 607, 5th edition, ISO 10497-5:2004) 1.5” & 2”
(API 607, 6th edition, ISO 10497:2010) 2.5”
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
SS External Trim
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-11, GRAPH NO. 5
PRODUCT
NUMBER
88A-907-01
88A-908-01
88A-909-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
2.5”
1.50
2.00
2.50
7.50
8.50
9.50
3.50
4.00
4.44
4.62
5.61
6.24
6.65
8.41
8.41
0.72
0.80
0.80
2.41
3.31
3.94
3.09
4.08
4.71
D-68 REV. 29JUN16
www.apollovalves.com
I
J
K
L
M
WT.
1.949
1.949
1.949
0.974
0.974
0.974
0.625
0.750
0.750
0.412
0.477
0.477
5/16-18
5/16-18
5/16-18
21
37
57
Customer Service (704) 841-6000
88A-900 SERIES
Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 3” through 6”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
PART
Body
Retainer
3
Ball
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Pipe Handle
VARIATIONS AVAILABLE:
88A-940 Series (316 SS Ball & Stem)
88A-930 Series (Ni-Cu Ball & Stem)
MATERIAL
ASTM A216 WCB
ASTM A216 WCB
ASTM A108 Type 1215 or
ASTM A216 WCB Chrome Plated
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
316 SS
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
SS
ASTM A193 Grade B7
ASTM A194 Grade 2H
Galvanized Steel (not shown)
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
SS External Trim
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-11, GRAPH NO. 5
PRODUCT
NUMBER
88A-900-01
88A-90A-01
88A-90C-01
SIZE
A
3”
4”
6”
3.00
4.00
6.00
B
11.12
12.00
15.88
C
5.24
5.44
6.82
D
8.80
9.99
13.73
E
F
G
H
4.06
5.25
7.30
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.296
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
WT.
78
133
329
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-69
88A-900 SERIES
Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 8” through 12”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
88A-930 Series (Ni-Cu Ball & Stem)
88A-940 Series (316 SS Ball & Stem)
MATERIAL
ASTM A216 WCB
ASTM A216 WCB
ASTM A108 Type 1215 or A216 WCB
ASTM A108 Type 1215
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
RPTFE
RPTFE
ASTM A193 Grade B7
ASTM A194 Grade 2H
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-35-49-65-67-69-70-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
PTFE Seats and Seals
No Lubrication. Assembled Dry.
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned for Industrial Gas
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet (8” Only)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-11, GRAPH NO. 5
PRODUCT
NUMBER
88A-90E-01
88A-90G-01
88A-90H-01
SIZE
8”
10”
12”
D-70 REV. 29JUN16
A
B
C
D
E
8.00
10.00
12.00
19.75
22.38
25.50
9.38
10.95
12.84
12.83
18.57
20.31
9.56
11.33
13.40
F
1.00
2.31
2.31
G
10.22
12.80
14.92
www.apollovalves.com
Customer Service (704) 841-6000
88B-100 SERIES
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 3”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Lockwasher
VARIATIONS AVAILABLE:
88B-130 Series (Ni-Cu Ball & Stem)
88B-140 Series (316 SS Ball & Stem)
MATERIAL
ASTM A216-WCB
ASTM A108 Type 1215
ASTM A108 Type 1215 Chrome Plated
ASTM A108 Type 1215 Chrome Plated
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
18-8 SS
316 SS with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
SS
302 or 304 SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-35-38-49-65-67-69-70-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
PEEK Seats and Graphite Packing (3” Only)
No Lubrication. Assembled Dry.
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned for Industrial Gases
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 1
PRODUCT
NUMBER
88B-100-01
SIZE
A
B
C
D
E
F
G
3”
2.50
8.00
4.00
6.23
8.40
3.93
4.70
H
I
J
K
L
M
1.949
0.974
0.750
0.477
5/16-18
3.00
N
0.77
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
WT.
43
D-71
88B-100 SERIES
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 4”-10” Short Pattern
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
Adapter Screw
Pipe Handle
VARIATIONS AVAILABLE:
88B-130 Series (Ni-Cu Ball & Stem)
88B-140 Series (316 SS Ball & Stem)
MATERIAL
ASTM A216-WCB
ASTM A108 Type 1215
ASTM A108 Type 1215 (Chrome Plate)
ASTM A108 Type 1215 (Chrome Plate)
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
18-8 SS
316 SS
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Stainless Steel
RPTFE
302 or 304 SS
SS
18-8 SS
Galvanized Steel (not shown)
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-35-38-49-65-67-69-70-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned for Industrial Gases
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL & CSA Listed (w/Markings)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-9, GRAPH NO. 1
PRODUCT
NUMBER
88B-10A-01
88B-10C-01
88B-10E-01
88B-10G-01
SIZE
A
4”
6”
8”
10”
3.00
4.00
6.00
8.00
D-72 REV. 29JUN16
B
9.00
10.50
11.50
13.00
C
4.18
5.25
5.75
6.50
D
8.80
9.99
13.61
N/A
E
F
0.50
0.50
1.00
1.00
4.75
5.94
7.63
9.50
G
H
I
J
K
5.95
7.13
9.36
11.23
2.840
2.840
4.596
4.596
1.420
1.420
2.298
2.298
1.250
1.250
2.000
2.000
0.725
0.725
1.375
1.375
www.apollovalves.com
L
3/8-16
3/8-16
3/4-10
3/4-10
Customer Service (704) 841-6000
M
WT.
4.00
6.00
8.00
10.0
72
110
210
350
88L-140 SERIES
Low Temperature Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5” through 2”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-10SS Lever and Nut
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
302 or 304 SS
316 SS
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
302 or 304 SS
SS
-35-38-49-65-67-69-70-73-76-77-80-82-90-9P-
VARIATIONS AVAILABLE:
88L-130 Series (Ni-Cu Ball & Stem)
-EP-KF-TC-TD-UL-
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Port with Plug
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
With Test Certificate
Tested to API Spec 6D
UL Listed
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-23, GRAPH NO. 31
PRODUCT
NUMBER
88L-147-01A
88L-148-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
1.25
1.50
6.50
7.00
3.50
3.69
4.85
4.62
6.53
6.65
0.47
0.72
1.85
2.41
2.38
3.09
I
J
K
L
M
1.392
1.949
0.696
0.974
0.500
0.625
0.287
0.412
1/4-20
5/16-18
N
WT.
1.50
2.00
9
18
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-73
88L-140 SERIES
Low Temperature Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 2.5” through 3”
For STANDARDS COMPLIANCE refer to page D-3.
STANDARD FEATURES refer to page D-3 and Rated to -50°F (-46°C).
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-10SS Lever and Nut
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316 or A351-CF8M
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
302 or 304 SS
ASTM A194 Grade 8
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
SS
ASTM A193 Grade B7
ASTM A194 Grade 2H
302 or 304 SS
-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-
VARIATIONS AVAILABLE:
88L-140 Series (316 SS Ball & Stem)
-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
SS External Trim
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Port with Plugs
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL Listed
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-23, GRAPH NO. 31
PRODUCT
NUMBER
88L-149-01
88L-140-01
SIZE
A
B
C
D
E
F
G
H
2.5”
3”
2.00
2.50
7.50
8.00
3.50
3.51
5.61
6.24
8.41
8.41
0.80
0.80
3.31
3.94
4.08
4.71
D-74 REV. 29JUN16
www.apollovalves.com
I
J
K
L
M
1.949
1.949
0.974
0.974
0.750
0.750
0.477
0.477
5/16-18
5/16-18
Customer Service (704) 841-6000
N
WT.
2.50
3.00
27
34
88L-140 SERIES
Low Temperature Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 4” through 8”
For STANDARDS COMPLIANCE refer to page D-3.
STANDARD FEATURES refer to page D-3 and Rated to -50°F (-46°C).
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adaptor Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Adapter Screw
Pipe Handle
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316 or A351-CF8M
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
316 SS
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
SS
ASTM A193 Grade B7
ASTM A194 Grade 2H
18-8 SS
Galvanized Steel (not shown)
-35-49-59-65-67-69-70-73-76-77-80-82-90-9P-
VARIATIONS AVAILABLE:
88L-140 Series (316 SS Ball & Stem)
-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
No Lubrication. Assembled Dry.
SS External Trim
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL Listed
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-23, GRAPH NO. 31
PRODUCT
NUMBER
88L-14A-01
88L-14C-01
88L-14E-01
SIZE
A
4”
6”
8”
3.00
4.00
6.00
B
9.00
10.50
18.00
C
4.18
4.69
9.00
D
8.80
9.99
13.73
E
F
G
H
3.88
5.13
7.00
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
N
WT.
4.00
6.00
8.00
73
117
310
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-75
88L-140 SERIES
Low Temperature Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 10”
For STANDARDS COMPLIANCE refer to page D-3.
STANDARD FEATURES refer to page D-3 and Rated to -50°F (-46°C).
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
88L-130 Series (Ni-Cu Ball & Stem)
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316 or A351-CF8M
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
RPTFE
RPTFE
ASTM A193 Grade B7
ASTM A194 Grade 2H
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-35-49-65-67-69-70-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
No Lubrication. Assembled Dry.
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Port with Plugs
4” Extended Bonnet
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL Listed
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-23, GRAPH NO. 31
PRODUCT
NUMBER
88L-14G-01
SIZE
A
10”
8.00
D-76 REV. 29JUN16
B
C
D
21.00
10.37
12.83
E
F
9.18
1.00
G
H
I
J
K
10.22
4.596
2.298
2.000
1.375
www.apollovalves.com
L
3/4-10
Customer Service (704) 841-6000
M
10.00
88L-240 SERIES
Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2” through 1”
For STANDARDS COMPLIANCE refer to page D-3.
STANDARD FEATURES refer to page D-3 and Rated to -50°F (-46°C).
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART (1/2”& 3/4” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Stem Nut
Lever
Stem Bearing
Stop
Body Seal
Lock Washer
Grounding Spring
Grounding Spring
PART (1” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
88L-230 Series (Ni-Cu Ball & Stem)
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
300 Series Stainless Steel
300 Series Stainless Steel w/Vinyl Grip
RPTFE
300 Series Stainless Steel
RPTFE
300 Series Stainless Steel
ASTM A313 Stainless Steel
ASTM A313 Stainless Steel
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
302 or 304 SS
316 SS
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
302 or 304 SS
SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-10SS Lever and Nut
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-35-38-49-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-TC-TD-UL-
1/2” & 3/4” VALVES
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Port with Plug
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
With Test Certificate
Tested to API Spec 6D
UL Listed
1” VALVE
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-23, GRAPH NO. 31
PRODUCT
NUMBER
88L-243-01
88L-244-01
88L-245-01
SIZE
A
B
C
D
E
F
G
H
1/2”
3/4”
1”
0.50
0.75
1.00
4.25
4.62
5.00
2.06
2.18
2.32
3.31
3.89
4.62
5.11
5.53
6.53
0.30
0.36
0.47
1.09
1.65
1.62
1.41
1.99
2.15
I
J
K
L
1.002
1.392
1.392
0.501
0.696
0.696
0.375
0.500
0.500
0.245
0.287
0.287
M
10-24
1/4-20
1/4-20
WT.
5
6
7
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-77
88L-240 SERIES
Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 1.5”through 2.5”
For STANDARDS COMPLIANCE refer to page D-3.
STANDARD FEATURES refer to page D-3 and Rated to -50°F (-46°C).
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated) (up to 2”)
-10SS Lever and Nut
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316 or A351-CF8M
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
302 & 304 SS
ASTM A194 Grade 8l
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
SS
ASTM A193 Grade B7
ASTM A194 Grade 2H
302 or 304 SS
-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-
VARIATIONS AVAILABLE:
88L-230 Series (Ni-Cu Ball & Stem)
-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
SS External Trim
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL Listed
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-23, GRAPH NO. 31
PRODUCT
NUMBER
88L-247-01
88L-248-01
88L-249-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
2.5”
1.50
2.00
2.50
6.50
7.00
7.50
3.00
3.04
3.34
4.62
5.61
6.24
6.65
8.41
8.41
0.72
0.80
0.80
2.41
3.31
3.94
3.09
4.08
4.71
D-78 REV. 29JUN16
www.apollovalves.com
I
J
K
L
M
WT.
1.949
1.949
1.949
0.974
0.974
0.974
0.625
0.750
0.750
0.412
0.477
0.477
5/16-18
5/16-18
5/16-18
14
25
30
Customer Service (704) 841-6000
88L-240 SERIES
Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 3” through 6”
For STANDARDS COMPLIANCE refer to page D-3.
STANDARD FEATURES refer to page D-3 and Rated to -50°F (-46°C).
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Pipe Handle
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316 or A351-CF8M
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
316 SS
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
SS
ASTM A193 Grade B7
ASTM A194 Grade 2H
Galvanized Steel (not shown)
-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-
VARIATIONS AVAILABLE:
88L-230 Series (Ni-Cu Ball & Stem)
-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
SS External Trim
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Port with Plug
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL Listed
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-23, GRAPH NO. 31
PRODUCT
NUMBER
88L-240-01
88L-24A-01
88L-24C-01
SIZE
A
3”
4”
6”
3.00
4.00
6.00
B
8.00
9.00
15.50
C
3.68
3.94
7.19
D
8.80
9.99
13.73
E
F
G
H
3.88
5.13
7.00
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
WT.
60
91
248
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-79
88L-240 SERIES
Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 8”through 12”
For STANDARDS COMPLIANCE refer to page D-3.
STANDARD FEATURES refer to page D-3 and Rated to -50°F (-46°C).
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316 or A351-CF8M
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
RPTFE
RPTFE
ASTM A193 Grade B7
ASTM A194 Grade 2H
88L-230 Series (Ni-Cu Ball & Stem)
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-35-49-65-67-69-70-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
No Lubrication. Assembled Dry.
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned for Industrial Gas
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet (8” Only)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL Listed
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-23, GRAPH NO. 31
PRODUCT
NUMBER
88L-24E-01
88L-24G-01
88L-24H-01
SIZE
8”
10”
12”
D-80 REV. 29JUN16
A
B
C
D
E
8.00
10.00
12.00
18.00
21.00
24.00
8.88
10.26
12.09
12.83
18.57
20.31
9.18
11.33
13.40
F
1.00
2.31
2.31
G
10.22
12.80
14.92
www.apollovalves.com
Customer Service (704) 841-6000
88L-740 SERIES
Low Temperature Carbon Steel ASME Class 300 Flanged Std. Port Ball Valve - 1.5” through 2”
For STANDARDS COMPLIANCE refer to page D-3.
STANDARD FEATURES refer to page D-3 and Rated to -50°F (-46°C).
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
88L-730 Series (Ni-Cu Ball & Stem)
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
302 & 304 SS
316 SS
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
302 or 304 SS
SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-10SS Lever and Nut
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-35-38-49-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-TC-TD-UL-
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
With Test Certificate
Tested to API Spec 6D
UL Listed
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-23, GRAPH NO. 32
PRODUCT
NUMBER
88L-747-01
88L-748-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
1.25
1.50
7.50
8.50
4.50
5.19
4.85
4.62
6.53
6.65
0.47
0.72
1.85
2.41
2.38
3.09
I
J
K
L
M
1.392
1.949
0.696
0.974
0.500
0.625
0.287
0.412
1/4-20
5/16-18
N
WT.
1.50
2.00
16
24
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-81
88L-740 SERIES
Low Temperature Carbon Steel ASME Class 300 Flanged Std. Port Ball Valve - 2.5” through 3”
For STANDARDS COMPLIANCE refer to page D-3.
STANDARD FEATURES refer to page D-3 and Rated to -50°F (-46°C).
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
VARIATIONS AVAILABLE:
88L-730 Series (Ni-Cu Ball & Stem)
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316 or A351-CF8M
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
302 or 304 SS
ASTM A194 Grade 8
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
SS
ASTM A193 Grade B7
ASTM A194 Grade 2H
302 or 304 SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-10SS Lever and Nut
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
SS External Trim
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Port with Plug
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL Listed
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-23, GRAPH NO. 32
PRODUCT
NUMBER
88L-749-01
88L-740-01
SIZE
A
2.5”
3”
2.00
2.50
D-82 REV. 29JUN16
B
9.50
11.12
C
D
E
F
G
H
4.75
5.56
5.61
6.24
8.41
8.41
0.80
0.80
3.31
3.94
4.08
4.71
www.apollovalves.com
I
J
K
L
M
1.949
1.949
0.974
0.974
0.750
0.750
0.477
0.477
5/16-18
5/16-18
Customer Service (704) 841-6000
N
WT.
2.50
3.00
39
55
88L-740 SERIES
Low Temperature Carbon Steel ASME Class 300 Flanged Std. Port Ball Valve - 4” through 8”
For STANDARDS COMPLIANCE refer to page D-3.
STANDARD FEATURES refer to page D-3 and Rated to -50°F (-46°C).
VARIATIONS AVAILABLE:
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Adapter Screw
Pipe Handle
88L-730 Series (Ni-Cu Ball & Stem)
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316 or A351-CF8M
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
316 SS
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
SS
ASTM A193 Grade B7
ASTM A194 Grade 2H
316 SS
Galvanized Steel (not shown)
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-35-49-59-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
No Lubrication. Assembled Dry.
SS External Trim
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL Listed
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-23, GRAPH NO. 32
PRODUCT
NUMBER
88L-74A-01
88L-74C-01
88L-74E-01
SIZE
A
4”
6”
8”
3.00
4.00
6.00
B
12.00
15.88
19.75
C
5.68
7.38
9.00
D
8.80
9.99
13.73
E
F
G
H
4.06
5.25
7.30
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
N
WT.
4.00
6.00
8.00
95
187
400
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-83
88L-740 SERIES
Low Temperature Carbon Steel ASME Class 300 Flanged Std. Port Ball Valve - 10”
For STANDARDS COMPLIANCE refer to page D-3.
STANDARD FEATURES refer to page D-3 and Rated to -50°F (-46°C).
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316 or A351-CF8M
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
RPTFE
RPTFE
ASTM A193 Grade B7
ASTM A194 Grade 2H
88L-730 Series (Ni-Cu Ball & Stem)
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-35-49-57-65-67-69-70-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
No Lubrication. Assembled Dry.
Oxygen Cleaned
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Port with Plugs
4” Extended Bonnet
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL Listed
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-23, GRAPH NO. 32
PRODUCT
NUMBER
88L-74G-01
SIZE
A
10”
8.00
D-84 REV. 29JUN16
B
C
D
22.38
10.69
12.83
E
F
9.56
1.00
G
H
I
J
K
10.22
4.596
2.298
2.000
1.375
www.apollovalves.com
L
3/4-10
Customer Service (704) 841-6000
M
10.00
88L-940 SERIES
Low Temperature Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2” through 1”
For STANDARDS COMPLIANCE refer to page D-3.
STANDARD FEATURES refer to page D-3 and Rated to -50°F (-46°C).
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART (1/2”& 3/4” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Stem Nut
Lever
Stem Bearing
Stop
Body Seal
Lock Washer
Grounding Spring
Grounding Spring
PART (1” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
VARIATIONS AVAILABLE:
88L-930 Series (Ni-Cu Ball & Stem)
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
300 Series Stainless Steel
300 Series Stainless Steel w/Vinyl Grip
RPTFE
300 Series Stainless Steel
RPTFE
300 Series Stainless Steel
ASTM A313 Stainless Steel
ASTM A313 Stainless Steel
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
302 or 304 SS
316 SS
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
302 or 304 SS
SS
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-10SS Lever and Nut
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-35-38-49-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-TC-TD-UL-
1/2” & 3/4” VALVES
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Port with Plug
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded(Gear, Actuated)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
With Test Certificate
Tested to API Spec 6D
UL Listed
1” VALVE
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-23, GRAPH NO. 32
PRODUCT
NUMBER
88L-943-01
88L-944-01
88L-945-01
SIZE
A
B
C
D
E
F
G
H
1/2”
3/4”
1”
0.50
0.75
1.00
5.50
6.00
6.50
3.31
3.56
3.82
3.31
3.89
4.62
5.11
5.53
6.53
0.30
0.36
0.47
1.09
1.65
1.62
1.38
1.99
2.15
I
J
K
L
1.000
1.392
1.392
0.500
0.696
0.696
0.375
0.500
0.500
0.245
0.287
0.287
M
10-24
1/4-20
1/4-20
WT.
7.0
9.0
10.5
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-85
88L-940 SERIES
Low Temperature Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1.5” through 2.5”
For STANDARDS COMPLIANCE refer to page D-3.
STANDARD FEATURES refer to page D-3 and Rated to -50°F (-46°C).
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
OPTIONS AVAILABLE:
(M(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated) (up to 2”)
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-15Wheel Handle, Steel
-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316 or A351-CF8M
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
302 & 304 SS
ASTM A194 Grade 8l
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
SS
ASTM A193 Grade B7
ASTM A194 Grade 2H
302 or ­304 SS
-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-
VARIATIONS AVAILABLE:
88L-930 Series (Ni-Cu Ball & Stem)
-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
SS External Trim
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL Listed
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-23, GRAPH NO. 32
PRODUCT
NUMBER
88L-947-01
88L-948-01
88L-949-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
2.5”
1.50
2.00
2.50
7.50
8.50
9.50
3.50
4.00
4.44
4.62
5.61
6.24
6.65
8.41
8.41
0.72
0.80
0.80
2.41
3.31
3.94
3.09
4.08
4.71
D-86 REV. 29JUN16
www.apollovalves.com
I
J
K
L
M
WT.
1.949
1.949
1.949
0.974
0.974
0.974
0.625
0.750
0.750
0.412
0.477
0.477
5/16-18
5/16-18
5/16-18
21
37
57
Customer Service (704) 841-6000
88L-940 SERIES
Low Temperature Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 3” through 6”
For STANDARDS COMPLIANCE refer to page D-3.
STANDARD FEATURES refer to page D-3 and Rated to -50°F (-46°C).
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Pipe Handle
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316 or A351-CF8M
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
316 SS
ASTM A366 Steel with Vinyl Grip
RPTFE
ASTM A108 Type 1215
SAE J429 Grade 2
ASTM A366 Steel
RPTFE
SS
ASTM A193 Grade B7
ASTM A194 Grade 2H
Galvanized Steel (not shown)
-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-
VARIATIONS AVAILABLE:
88L-930 Series (Ni-Cu Ball & Stem)
-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
PEEK Seats and Graphite Packing
No Lubrication. Assembled Dry.
SS External Trim
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned For Industrial Gases
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet
316 SS Spiral Wound Gaskets w/PTFE Filler
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL Listed
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-23, GRAPH NO. 32
PRODUCT
NUMBER
88L-940-01
88L-94A-01
88L-94C-01
SIZE
A
3”
4”
6”
3.00
4.00
6.00
B
11.12
12.00
15.88
C
5.24
5.44
6.82
D
8.80
9.99
13.73
E
F
G
H
4.06
5.25
7.30
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.296
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
WT.
78
133
329
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-87
88L-940 SERIES
Low Temperature Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 8” through 12”
For STANDARDS COMPLIANCE refer to page D-3.
STANDARD FEATURES refer to page D-3 and Rated to -50°F (-46°C).
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Bearing
Body Seal
Body Joint Stud
Body Joint Nut
VARIATIONS AVAILABLE:
88L-930 Series (Ni-Cu Ball & Stem)
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A351-CF8M
ASTM A276-316
ASTM A108 Type 1215
PTFE
RPTFE
ASTM A193 B7
316 SS
RPTFE
RPTFE
ASTM A193 Grade B7
ASTM A194 Grade 2H
OPTIONS AVAILABLE:
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
-14-21UHMWPE Seats
Graphite packing, spiral wound graphite body seal,
-24RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
-26-35-49-65-67-69-70-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-TC-TD-UL-
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PTFE Seats and Seals
No Lubrication. Assembled Dry.
MPTFE Seats and Graphite Packing (Fire Safe)
Cleaned for Industrial Gas
Drilled and Tapped Purge Ports with Plugs
4” Extended Bonnet (8” Only)
Live Loaded (Lever)
Live Loaded (Gear, Actuator)
Multi-Seal (Super TFE)
Flat Face Flanges
Double Packed 4” Extended Bonnet
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
PCTFE Stem Bearing
Gear Operator with Standard Handwheel
Gear Operator with Standard Handwheel & Locking Device
Gear Operator with Oversize Handwheel
Gear Operator with Oversize Handwheel & Locking Device
With Test Certificate
Tested to API Spec 6D
UL Listed
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-23, GRAPH NO. 32
PRODUCT
NUMBER
88L-94E-01
88L-94G-01
88L-94H-01
SIZE
8”
10”
12”
D-88 REV. 29JUN16
A
B
C
D
E
8.00
10.00
12.00
19.75
22.38
25.50
9.38
10.95
12.84
12.83
18.57
20.31
9.56
11.33
13.40
F
1.00
2.31
2.31
G
10.22
12.80
14.92
www.apollovalves.com
Customer Service (704) 841-6000
87A-400 SERIES
Alloy 20 ASME Class 150 Flanged Standard Port Ball Valve - 1.5” through 2”
For STANDARDS COMPLIANCE refer to page D-3.
STANDARD FEATURES refer to page D-3 and Rated to -50°F (-46°C).
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
Grounding Spring
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-15Wheel Handle, Steel
-21UHMWPE Seats
-24Fire Safe (Graphite Packing and Seal)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Port with Plug
-704” Extended Bonnet
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-PMPositive Material Identification
-TCWith Test Certificate
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-TDTested to API Spec 6D
MATERIAL
ASTM A351 CN7M
ASTM B473 (UNS N08020)
ASTM B473 (UNS N08020)
ASTM B473 (UNS N08020)
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
302 or 304 SS
316 SS
302 or 304 SS with Vinyl Grip
RPTFE
ASTM A276 Type 316
18-8 SS
302 or 304 SS
RPTFE
302 or 304 SS
SS
Inconel (not shown)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-16, GRAPH NO. 18
PRODUCT
NUMBER
87A-407-01A
87A-408-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
1.00
1.50
6.50
7.00
3.50
3.69
4.85
4.62
6.53
6.65
0.47
0.72
1.85
2.41
2.38
3.09
I
J
K
L
M
1.392
1.949
0.696
0.974
0.500
0.625
0.287
0.412
1/4-20
5/16-18
N
WT.
1.50
2.00
9
18
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-89
87A-400 SERIES
Alloy 20 ASME Class 150 Flanged Standard Port Ball Valve - 3”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
Grounding Spring
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
-24Fire Safe (Graphite Packing and Seal)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
MATERIAL
ASTM A351 CN7M
ASTM A351 CN7M
ASTM B473 (UNS N08020) or CN7M
ASTM B473 (UNS N08020)
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS with Vinyl Grip
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
Inconel (not shown)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-16, GRAPH NO. 18
PRODUCT
NUMBER
87A-400-01
SIZE
A
B
C
D
E
F
G
H
3”
2.50
8.00
3.51
6.24
8.41
0.80
3.94
4.71
D-90 REV. 12APR16
www.apollovalves.com
I
J
K
L
M
1.949
0.974
0.750
0.477
5/16-18
Customer Service (704) 841-6000
N
WT.
3.00
34.3
87A-400 SERIES
Alloy 20 ASME Class 150 Flanged Standard Port Ball Valve - 4” through 8”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
PART
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Adapter Screw
Pipe Handle
Grounding Spring
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
-24Fire Safe (Graphite Packing and Seal)
-35PTFE Seats and Seals
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
MATERIAL
ASTM A351 CN7M
ASTM A351 CN7M
ASTM B473 (UNS N08020) or CN7M
ASTM B473 (UNS N08020)
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS with Vinyl Grip
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
18-8 SS
Galvanized Steel (not shown)
Inconel (not shown)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-16, GRAPH NO. 18
PRODUCT
NUMBER
87A-40A-01
87A-40C-01
87A-40E-01
SIZE
A
4”
6”
8”
3.00
4.00
6.00
B
9.00
10.50
18.00
C
4.18
4.69
9.00
D
8.80
9.99
13.73
E
F
G
H
3.88
5.13
7.00
0.50
.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
N
WT.
4.00
6.00
8.00
73
117
310
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-91
87A-500 SERIES
Alloy 20 ASME Class 150 Flanged Full Port Ball Valve - 1/2” through 1”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
PART (1/2” & 3/4” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Stem Nut
Lever
Stem Bearing
Stop
Body Seal
Lockwasher
Grounding Spring
Grounding Spring
PART (1” VALVES)
Body
Retainer
Ball
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Stem Nut
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Lockwasher
Grounding Spring
Grounding Spring
OPTIONS AVAILABLE: (More information in Section J)
MATERIAL
ASTM A351 CN7M
ASTM B473 (UNS N08020)
ASTM B473 (UNS N08020)
ASTM B473 (UNS N08020)
ASTM A276 Type 316
PTFE
RPTFE
300 Series Stainless Steel
300 Series Stainless Steel w/ Vinyl Grip
RPTFE
300 Series Stainless Steel
RPTFE
300 Series Stainless Steel
ASTM A313 Stainless Steel
ASTM A313 Stainless Steel
MATERIAL
ASTM A351 CN7M
ASTM B473 (UNS N08020)
ASTM B473 (UNS N08020)
ASTM B473 (UNS N08020)
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
302 or 304 SS
316 SS
302 or 304 with Vinyl Grip
RPTFE
ASTM A276 Type 316
18-8 SS
302 or 304 SS
RPTFE
302 or 304 SS
SS
Inconel (not shown)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-15Wheel Handle, Steel
-21UHMWPE Seats
-24Fire Safe (Graphite Packing and Seal)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Port with Plugs
-704” Extended Bonnet
-73Alloy 20 Spiral Wound Gaskets w/PTFE Filler
-74Alloy 20 Spiral Wound Gaskets w/Graphite Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
1” Valve
1/2” & 3/4” Valves
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-16, GRAPH NO. 18
PRODUCT
NUMBER
87A-503-01
87A-504-01
87A-505-01
SIZE
A
B
C
D
E
F
G
H
1/2”
3/4”
1”
0.50
0.75
1.00
4.25
4.62
5.00
2.06
2.18
2.32
3.31
3.89
4.62
5.11
5.53
6.53
0.30
0.36
0.47
1.09
1.65
1.62
1.41
1.99
2.15
D-92 REV. 12APR16
www.apollovalves.com
I
J
K
L
1.000
1.392
1.392
0.500
0.696
0.696
0.375
0.500
0.500
0.245
0.287
0.287
M
10-24
1/4-20
1/4-20
Customer Service (704) 841-6000
WT.
5
6
7
87A-500 SERIES
Alloy 20 ASME Class 150 Flanged Full Port Ball Valve - 1.5” through 2.5”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
PART
Body
Retainer
3
Ball
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Lever
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Lockwasher
Grounding Spring
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-042.25” Stem Extension (Carbon Steel, Zinc Plated)
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
-24Fire Safe (Graphite Packing and Seal)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing (3” Only)
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-704” Extended Bonnet
-73Alloy 20 Spiral Wound Gaskets w/PTFE Filler
-74Alloy 20 Spiral Wound Gaskets w/Graphite Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
MATERIAL
ASTM A351 CN7M
ASTM A351 CN7M
ASTM B473 (UNS N08020) or
A351 CN7M
ASTM B473 (UNS N08020)
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 SS
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
302 or 304 SS
Inconel (not shown)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-16, GRAPH NO. 18
PRODUCT
NUMBER
87A-507-01
87A-508-01
87A-509-01
SIZE
A
B
C
D
E
F
G
H
1.5”
2”
2.5”
1.50
2.00
2.50
6.50
7.00
7.50
3.00
3.04
3.34
4.62
5.61
6.24
6.65
8.41
8.41
0.72
0.80
0.80
2.41
3.31
3.94
3.09
4.08
4.71
I
J
K
L
M
WT.
1.949
1.949
1.949
0.974
0.974
0.974
0.625
0.750
0.750
0.412
0.477
0.477
5/16-18
5/16-18
5/16-18
14
25
30
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-93
87A-500 SERIES
Alloy 20 ASME Class 150 Flanged Full Port Ball Valve - 3” through 6”
For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
PART
Body
Retainer
3
Ball
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Stem
Packing Gland
Stem Seals
Seats
Gland Screws
Gland Plate
Adapter Screw
Handle Adapter
Stem Bearing
Stop
Stop Screw
Lock Plate
Body Seal
Grounding Spring
Body Joint Stud
Body Joint Nut
Pipe Handle
Grounding Spring
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
-01
Standard Configuration
-14Side Vented Ball (Uni-Directional)
-21UHMWPE Seats
-24Fire Safe (Graphite Packing and Seal)
-35PTFE Seats and Seals
-38PEEK Seats and Graphite Packing
-49No Lubrication. Assembled Dry.
-57Oxygen Cleaned
-65MPTFE Seats and Graphite Packing (Fire Safe)
-69Drilled and Tapped Purge Ports with Plugs
-70Extended Bonnet
-73Alloy 20 Spiral Wound Gaskets w/PTFE Filler
-74Alloy 20 Spiral Wound Gaskets w/Graphite Filler
-76Live Loaded (Lever)
-77Live Loaded (Gear, Actuator)
-80Multi-Seal (Super TFE)
-82Flat Face Flanges
-90Double Packed 4” Extended Bonnet
-9PDouble Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
-EPGraphite Gasket (Fire Safe by Design)
-KFPCTFE Stem Bearing
-MGGear Operator with Standard Handwheel
-MHGear Operator with Standard Handwheel & Locking Device
-MJGear Operator with Oversize Handwheel
-MKGear Operator with Oversize Handwheel & Locking Device
-MPPositive Material Identification
-TCWith Test Certificate
-TDTested to API Spec 6D
MATERIAL
ASTM A351 CN7M
ASTM A351 CN7M
ASTM B473 (UNS N08020 or
A351 CN7M)
ASTM B473 (UNS N08020)
ASTM A276 Type 316
PTFE
RPTFE
ASTM A193 B8 Class 1
316 SS
18-8 SS
316 with Vinyl Grip
RPTFE
ASTM A276 Type 316
316 SS
302 or 304 SS
RPTFE
SS
ASTM A193 Grade B8M
ASTM A194 Grade 8
Galvanized Steel (not shown)
Inconel (not shown)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-16, GRAPH NO. 18
PRODUCT
NUMBER
87A-500-01
87A-50A-01
87A-50C-01
SIZE
A
3”
4”
6”
3.00
4.00
6.00
D-94 REV. 12APR16
B
8.00
9.00
15.50
C
3.68
3.94
7.19
D
8.80
9.99
13.73
E
F
G
H
3.88
5.13
7.00
0.50
0.50
1.00
4.75
5.94
7.75
5.95
7.13
9.48
www.apollovalves.com
I
J
K
L
2.840
2.840
4.596
1.420
1.420
2.298
1.250
1.250
2.000
0.725
0.725
1.375
M
3/8-16
3/8-16
3/4-10
Customer Service (704) 841-6000
WT.
60
91
248
87A-F00 SERIES
Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1”
For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
Ball
4
Stem
5
Seats
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Body Seal
Stem Seals
Stem Bearing
Grounding Spring
Grounding Spring
Packing Gland
Stem Screw
Lever & Grip
Gland Plate
Stops
Lock Plate
Spacer
Stop Screws
Gland Plate Screws
Add desired suffixes in numerical order.
Not all possible combinations are available. Minimum quantities may apply.
(SUFFIX)
-04-14-21-24-38-45-49-57-69-70-76-77-80-82-90-95-9P-
16
18
12
13
15
ØL
STEM
9
11
7
1
2
10
A
G
H
17
14
8
-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-
E
D
F
STEM
FLATS
-EP-
OPTION
2.25” Stem Extension (Carbon Steel, Zinc Plated) (1” - 2”)
Side vented ball (uni-directional)
UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Graphite packing, spiral wound graphite body seal,
RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Less lever and nut (bare stem)
No Lubrication. Assembled Dry.
Oxygen cleaned
Drilled & tapped purge port with plugs
4" extended bonnet
Live loaded (lever operated)
Live loaded (gear operator or actuator)
Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing
Flat Face Flanges
Double Packed 4” Extended Bonnet
Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
Kolsterised ball
Gear operator with standard handwheel
Gear operator with standard handwheel & locking device
Gear operator with oversize handwheel
Gear operator with oversize handwheel & locking device
Positive material indentification
17-4 PH stem
Hydrostatic test with certified report
API 6D Test (hydrostatic testing)
Hydrostatic test with certified report & MTR
Hydrostatic test with certified report & witnessed
5
UNTING
19
4
3
ØL
STEM
N
SQUARE
G
C
M
STEM
FLATS
J
K
B
H
M
STEM
FLATS
6
F
3
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
MATERIAL
ASTM A351-CF8M
ASTM A276 Type 316
ASTM A351-CF8M or
ASTM A276 Type 316
ASTM A276 Type 316
Defined by Seat Suffix Selected
See “95” or “80” also “38” & “21”
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
316 Stainless Steel
316 Stainless Steel
ASTM A276 Type 316
Steel Zinc Plated
316 Stainless Steel w/Vinyl Grip
316 Stainless Steel
ASTM A276 Type 316
302 or 304 Stainless Steel
ASTM A276 type 316
316 Stainless Steel
ASTM A193-B8
STEM
1
2
PART
Body
Retainer
ACTUATOR MOUNTING
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-25, GRAPH NO. 34
PRODUCT
NUMBER
87A-F05-XX
SIZE
A
B
C
D
E
F
1”
1.00
8.50
5.13
3.99
6.65
0.45
C
G
H
1.730
2.460
J
K
0.98
1.95
L
M
N
WT.
0.625
0.412
5/16-18
13.0
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-95
87A-F00 SERIES
Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1.5” through 2.5”
For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
3
Ball
4
Stem
5
Seats
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Body Seal
Stem Seals
Stem Bearing
Grounding Spring
Grounding Spring
Packing Gland
Stem Nut
Lever & Grip
Gland Plate
Stops
Lock Plate
Stop Screws
Gland Plate Screws
Body Joint Stud
Body Joint Nut
Lock Washer
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
MATERIAL
ASTM A351-CF8M
ASTM A351-CF8M
ASTM A351-CF8M or
ASTM A276 Type 316
ASTM A276 Type 316
Defined by Seat Suffix Selected
See “95” or “80” also “38” & “21”
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
316 Stainless Steel
316 Stainless Steel
ASTM A276 Type 316
ASTM A194 Grade 8
316 Stainless Steel w/Vinyl Grip
316 Stainless Steel
ASTM A276 Type 316
302 or 304 Stainless Steel
18-8 Stainless Steel
ASTM A193-B8
ASTM A193-B8 Grade B8M
ASTM A194-Grade 8
302 or 304 Stainless Steel
Add desired suffixes in numerical order.
Not all possible combinations are available. Minimum quantities may apply.
(SUFFIX)
-04-14-21-24-38-45-49-57-69-70-76-77-80-82-90-95-9P-
13
7
2
10
8
M
A
STEM FLATS
G
H
4
15
F
9
11
14
D
ØL
STEM
17
12
21
16
STEM
FLATS
-KB -MG-MH-MJ-MK-MP- PH-TC-TD-TR-TW-
F
STEM
FLATS
-EP-
OPTION
2.25” Stem Extension (Carbon Steel, Zinc Plated) (1” - 2”)
Side vented ball (uni-directional)
UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Graphite packing, spiral wound graphite body seal,
RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Less lever and nut (bare stem)
No Lubrication. Assembled Dry.
Oxygen cleaned
Drilled & tapped purge port with plugs
4" extended bonnet
Live loaded (lever operated)
Live loaded (gear operator or actuator)
Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing
Flat Face Flanges
Double Packed 4” Extended Bonnet
Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
Kolsterised ball
Gear operator with standard handwheel
Gear operator with standard handwheel & locking device
Gear operator with oversize handwheel
Gear operator with oversize handwheel & locking device
Positive material indentification
17-4 PH stem
Hydrostatic test with certified report
API 6D Test (hydrostatic testing)
Hydrostatic test with certified report & MTR
21
16
Hydrostatic test with certified report & witnessed
18
N
5
J
B
M
K
20
19
D-96
SIZE
A
1.5”
2”
2.5”
1.50
2.00
2.50
B
9.50
11.50
13.00
C
D
E
3.62
5.49
6.02
5.03
6.06
6.63
8.40
12.06
12.06
F
0.74
0.84
0.84
5
1
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-25, GRAPH NO. 34 & 35
3
ACTUATOR MOUNTING
G
H
2.730
3.490
4.190
3.500
4.370
5.070
www.apollovalves.com
J
K
0.98
1.42
1.42
1.95
2.84
2.84
L
M
N
C
WT.
0.750
1.000
1.000
0.477
0.620
0.620
5/16-18
3/8-16
3/8-16
31.5
53.0
65.0
Customer Service (704) 841-6000
7
1
8
G
6
C
PRODUCT
NUMBER
87A-F07-XX
87A-F08-XX
87A-F09-XX
4
STEM FLATS
R MOUNTING
9
11
14
H
3
SQUARE
1
ØL
STEM
17
12
A
1
2
PART
Body
Retainer
6
B
20
87A-F00 SERIES
Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 3” through 4”
For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
3
Ball
4
Stem
5
Seats
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Body Seal
Stem Seals
Stem Bearing
Grounding Spring
Grounding Spring
Packing Gland
Stem Screw
Handle Adapter
Pipe Handle
Gland Plate
Stops
Lock Plate
Stop Screws
Gland Plate Screws
Body Joint Stud
Body Joint Nut
Adapter Screw
OPTIONS AVAILABLE: (More information in Section J)
E
18
12
17
STEM FLATS
F
(SUFFIX)
-14-21-
9
11
7
4
8
13
-24-38-45-49-57-69-70-76-77-80-82-90-95-9P-EP-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-
14
16
10
OPTION
Side vented ball (uni-directional)
UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Graphite packing, spiral wound graphite body seal,
RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Less lever and nut (bare stem)
No Lubrication. Assembled Dry.
Oxygen cleaned
Drilled & tapped purge port with plugs
4" extended bonnet
Live loaded (lever operated)
Live loaded (gear operator or actuator)
Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing
Flat Face Flanges
Double Packed 4” Extended Bonnet
Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
Kolsterised ball
Gear operator with standard handwheel
Gear operator with standard handwheel & locking device
Gear operator with oversize handwheel
Gear operator with oversize handwheel & locking device
Positive material indentification
17-4 PH stem
Hydrostatic test with certified report
API 6D Test (hydrostatic testing)
Hydrostatic test with certified report & MTR
Hydrostatic test with certified report & witnessed
2
12
17
19
F
15
4
8
A
B
STEM FLATS
M
21
STEM FLATS
C
J
6
20
K
3
SQUARE
5
1
G
NTING
E
18
ØL
STEM
N
H
A
G
H
M
15
Add desired suffixes in numerical order.
Not all possible combinations are available. Minimum quantities may apply.
22
ØL
STEM
STEM FLATS
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
MATERIAL
ASTM A351-CF8M
ASTM A351-CF8M
ASTM A351-CF8M or
ASTM A276 Type 316
ASTM A276 Type 316
Defined by Seat Suffix Selected
See “95” or “80” also “38” & “21”
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
316 Stainless Steel
316 Stainless Steel
ASTM A276 Type 316
304 Stainless Steel
316 Stainless Steel
Galvanized Steel
ASTM A351-CF8M
ASTM A276 Type 316
302 or 304 Stainless Steel
18-8 Stainless Steel
ASTM A193-B8
ASTM A193-B8M
ASTM A194 Grade 8
18-8 Stainless Steel
D
1
2
PART
Body
Retainer
ACTUATOR MOUNTING
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-25, GRAPH NO. 35
PRODUCT
NUMBER
87A-F00-XX
87A-F0A-XX
SIZE
A
3”
4”
3.00
4.00
B
14.00
17.00
C
7.00
7.19
D
E
8.55
11.20
18.00
34.00
F
0.50
0.75
G
H
4.750
6.630
5.946
8.081
J
K
1.42
1.74
2.84
3.48
L
M
1.250
1.500
0.725
0.780
N
3/8-16
1/2-13
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
1
5
3
WT.
101.0
194.0
C
B
D-97
87A-F00 SERIES
Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 6”
For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
3
Ball
4
Stem
5
Seats
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Body Seal
Stem Seals
Stem Bearing
Grounding Spring
Grounding Spring
Packing Gland
Stem Screw
Handle Adapter
Pipe Handle
Gland Plate
Stops
Lock Plate
Stop Screws
Gland Plate Screws
Body Joint Stud
Body Joint Nut
Adapter Screw
22
STEM FLATS
(SUFFIX)
-14-21-38-45-49-57-69-70-76-77-80-82-90-95-9P-EP-
18
16
9
11 7
8
OPTION
Side vented ball (uni-directional)
UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Graphite packing, spiral wound graphite body seal,
RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Less lever and nut (bare stem)
No Lubrication. Assembled Dry.
Oxygen cleaned
Drilled & tapped purge port with plugs
4" extended bonnet
Live loaded (lever operated)
Live loaded (gear operator or actuator)
Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing
Flat Face Flanges
Double Packed 4” Extended Bonnet
Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
Kolsterised ball
Gear operator with standard handwheel
Gear operator with standard handwheel & locking device
Gear operator with oversize handwheel
Gear operator with oversize handwheel & locking device
Positive material indentification
17-4 PH stem
Hydrostatic test with certified report
API 6D Test (hydrostatic testing)
Hydrostatic test with certified report & MTR
Hydrostatic test with certified report & witnessed
-24-
-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-
14
2
F
4
19
ØL
STEM
21
10
8
F
G
M
20
J
6
C
K
3
STEM FLATS
SQUARE
5
1
22
15
H
NTING
STEM FLATS
N
E
13
17
A
G
10
Add desired suffixes in numerical order.
Not all possible combinations are available. Minimum quantities may apply.
12
15
H
M
STEM FLATS
E
13
17
ØL
STEM
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
MATERIAL
ASTM A351-CF8M
ASTM A351-CF8M
ASTM A351-CF8M or
ASTM A276 Type 316
ASTM A276 Type 316
Defined by Seat Suffix Selected
See “95” or “80” also “38” & “21”
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
316 Stainless Steel
316 Stainless Steel
ASTM A276 Type 316
304 Stainless Steel
316 Stainless Steel
Galvanized Steel
316 Stainless Steel
ASTM A276 Type 316
302 or 304 Stainless Steel
316 Stainless Steel
ASTM A193-B8
ASTM A193-B8M
ASTM A194 Grade 8
18-8 Stainless Steel
D
1
2
PART
Body
Retainer
4
B
ACTUATOR MOUNTING
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-26, GRAPH NO. 36
PRODUCT
NUMBER
87A-F0C-XX
SIZE
A
6”
6.00
B
22.00
C
9.94
D
E
14.17
45.00
F
1.00
5
1
G
H
J
8.190
9.915
2.298
K
L
4.59
2.00
M
1.375
N
3/4-10
WT.
500.0
3
6
C
B
D-98
www.apollovalves.com
Customer Service (704) 841-6000
87A-F00 SERIES
Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 8”
For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
Ball
4
Stem
5
Seats
6
7
8
9
10
11
12
13
14
15
Body Seal
Stem Seals
Stem Bearing
Grounding Spring
Grounding Spring
Packing Gland
Gland Plate
Gland Plate Screws
Body Joint Stud
Body Joint Nut
Add desired suffixes in numerical order.
Not all possible combinations are available. Minimum quantities may apply.
(SUFFIX)
-14-21-24-38-45-49-57-69-70-76-77-80-82-90-95-9P-
11
M
+.000
-.015
F
4
9
7
8
10
H
E
D
ØL
12
-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-
KEYSEAT
DEPTH
H
-EP-
OPTION
Side vented ball (uni-directional)
UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Graphite packing, spiral wound graphite body seal,
RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Less lever and nut (bare stem)
No Lubrication. Assembled Dry.
Oxygen cleaned
Drilled & tapped purge port with plugs
4" extended bonnet
Live loaded (lever operated)
Live loaded (gear operator or actuator)
Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing
Flat Face Flanges
Double Packed 4” Extended Bonnet
Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
Kolsterised ball
Gear operator with standard handwheel
Gear operator with standard handwheel & locking device
Gear operator with oversize handwheel
Gear operator with oversize handwheel & locking device
Positive material indentification
17-4 PH stem
Hydrostatic test with certified report
API 6D Test (hydrostatic testing)
Hydrostatic test with certified report & MTR
Hydrostatic test with certified report & witnessed
13
1
5
TING
6
C
22.5°
15
G ±.001
B
+.000
J -.015
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-26, GRAPH NO. 36
PRODUCT
NUMBER
87A-F0E-XX
SIZE
A
8”
8.00
7
8
2
14
3
12
D
ØL
45°
ØK
STEM
11
M
A
G ±.001
4
9
F
3
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
MATERIAL
ASTM A351-CF8M
ASTM A351-CF8M
ASTM A351-CF8M or ASTM A276 Type
316
ASTM A276 Type 316
Defined by Seat Suffix Selected
See “95” or “80” also “38” & “21”
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
316 Stainless Steel
316 Stainless Steel
ASTM A276 Type 316
316 Stainless Steel
ASTM A193-B8
ASTM A193 Grade B8M
ASTM A194 Grade 8
KEYSEAT
DEPTH
1
2
PART
Body
Retainer
ØK
STEM
1
ACTUATOR MOUNTING
B
C
D
E
F
G
26.00
11.20
17.77
12.00
2.25*
0.627
H
5.77
J
2.133
K
2.49
L
10.00
M
5/8-11
WT.
5
3
6
C
B
920.0
* Keyway Length
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-99
88A-F00 SERIES
Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1”
For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Body Seal
Stem Seals
Stem Bearing
Grounding Spring
Grounding Spring
Packing Gland
Stem Screw
Lever & Grip
Gland Plate
Stops
Lock Plate
Spacer
Stop Screws
Gland Plate Screws
F
18
12
16
9
11
7
-24-26-
13
1
-EP-
10
5
4
3
F
OUNTING
C
B
19
ØL
STEM
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Graphite packing, spiral wound graphite body seal,
RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Less lever and nut (bare stem)
No Lubrication. Assembled Dry.
Cleaned for industrial gas (CS only)
Drilled & tapped purge port with plugs
4" extended bonnet
Live loaded (lever operated)
Live loaded (gear operator or actuator)
Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing
Flat Face Flanges
Double Packed 4” Extended Bonnet
Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
Kolsterised ball
Gear operator with standard handwheel
Gear operator with standard handwheel & locking device
Gear operator with oversize handwheel
E handwheel & locking device
Gear operator with oversize
18
Positive material indentification
12
16
17-4 PH stem
Hydrostatic test with certified 15
report 13
API 6D Test (hydrostatic testing)
9
report & MTR
17Hydrostatic test with certified
11
1
report & witnessed
14 Hydrostatic test with certified
7
8
G
H
2
10
J
A
K
SQUARE
N
-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-
STEM
FLATS
M
STEM
FLATS
6
OPTION
2.25” Stem Extension (Carbon Steel, Zinc Plated) (1” - 2”)
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-38-45-49-67-69-70-76-77-80-82-90-95-9P-
2
A
G
H
17
14
8
(SUFFIX)
-04-14-21-
E
15
ØL
STEM
Add desired suffixes in numerical order.
Not all possible combinations are available. Minimum quantities may apply.
D
Seats
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
D
5
VARIATIONS AVAILABLE:
88A-F40 Series (316 SS Ball & Stem)
MATERIAL
ASTM A216-WCB
ASTM A108 Type 1018
ASTM A108 Type 1215 Chrome Plated
ASTM A108 Type 1215
Defined by Seat Suffix Selected
See “95” or “80” also “38” & “21”
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
316 Stainless Steel
316 Stainless Steel
ASTM A108 Type 1215
Steel Zinc Plated
ASTM A366 Steel w/Vinyl Grip
302 or 304 Stainless Steel
ASTM A108 Type 1215
ASTM A366 Steel
ASTM A276 Type 316
SAE J429 Grade 2 Steel Zinc Plated
ASTM A193-B7
STEM
FLATS
1
2
3
4
PART
Body
Retainer
Ball
Stem
M
STEM
FLATS
6
5
C
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-25, GRAPH NO. 34
PRODUCT
NUMBER
88A-F05-XX
SIZE
A
B
C
D
E
F
1”
1.00
8.50
5.13
3.99
6.65
0.45
D-100 REV. 29JUN16
4
3
ACTUATOR MOUNTING
G
H
1.730
2.460
www.apollovalves.com
J
B
0.98
K
1.95
L
M
N
WT.
0.625
0.412
5/16-18
13.0
Customer Service (704) 841-6000
88A-F00 SERIES
Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1.5” through 2.5”
For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
4
Stem
5
Seats
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Body Seal
Stem Seals
Stem Bearing
Grounding Spring
Grounding Spring
Packing Gland
Stem Nut
Lever & Grip
Gland Plate
Stops
Lock Plate
Stop Screws
Gland Plate Screws
Body Joint Stud
Body Joint Nut
Lock Washer
-26-38-45-49-67-69-70-76-77-80-82-90-95-9P-
9
11
13
7
-EP2
10
8
G
15
-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-
5
1
3
OUNTING
6
C
20
19
18
B
ØL
STEM
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Graphite packing, spiral wound graphite body seal,
RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Less lever and nut (bare stem)
No Lubrication. Assembled Dry.
Cleaned for industrial gas (CS only)
Drilled & tapped purge port with plugs
4" extended bonnet
Live loaded (lever operated)
Live loaded (gear operator or actuator)
Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing
Flat Face Flanges
Double Packed 4” Extended Bonnet
Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
Kolsterised ball
Gear operator with standard handwheel
Gear operator with standard handwheel & locking device
Gear operator with oversize handwheel
Gear operator with oversize handwheel & locking device
Positive material indentification
E
17-4 PH stem
Hydrostatic test with certified report
17
12
API 16
6D Test21(hydrostatic testing)
Hydrostatic test with certified report15& MTR
13
Hydrostatic
test with certified9report & witnessed
14
11
4
M
J
2
A
STEM FLATS
K
SQUARE
7
10
8
G
N
OPTION
2.25” Stem Extension (Carbon Steel, Zinc Plated) (1” - 2”)
H
M
A
D
F
STEM
FLATS
4
H
-24-
17
12
21
14
STEM FLATS
(SUFFIX)
-04-14-21-
E
16
ØL
STEM
Add desired suffixes in numerical order.
Not all possible combinations are available. Minimum quantities may apply.
D
Ball
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
F
3
VARIATIONS AVAILABLE:
88A-F40 Series (316 SS Ball & Stem)
MATERIAL
ASTM A216-WCB
ASTM A216-WCB
ASTM A108 Type 1215 or
A216-WCB Chrome Plated
ASTM A108 Type 1215
Defined by Seat Suffix Selected
See “95” or “80” also “38” & “21”
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
316 Stainless Steel
316 Stainless Steel
ASTM A108 Type 1215
ASTM A194 Grade 8
ASTM A366 Steel w/Vinyl Grip
302 & 304 Stainless Steel
ASTM A108 Type 1215
ASTM A366 Steel
SAE J429 Grade 2
ASTM A193-B7
ASTM A193-Grade B7
ASTM A194-Grade 2H
302 or 304 Stainless Steel
STEM
FLATS
1
2
PART
Body
Retainer
5
1
FOR PRESSURE/TEMPERATURE
RATINGS, REFER TO PAGE M-25, GRAPH NO. 34 & 35
3
ACTUATOR MOUNTING
PRODUCT
NUMBER
88A-F07-XX
88A-F08-XX
88A-F09-XX
SIZE
A
1.5”
2”
2.5”
1.50
2.00
2.50
B
9.50
11.50
13.00
C
D
3.62
5.49
6.02
5.03
6.06
6.63
E
8.40
12.06
12.06
F
0.74
0.84
0.84
G
H
2.730
3.490
4.190
3.500
4.370
5.070
J
0.98
1.42
1.42
C
K
1.95
2.84
2.84
L
0.750
B
1.000
1.000
6
20
M
0.477
0.620
0.620
19
N
WT.
5/16-18
3/8-16
3/8-16
31.5
53.0
65.0
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-101
88A-F00 SERIES
Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 3” through 4”
For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
Stem
5
Seats
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Body Seal
Stem Seals
Stem Bearing
Grounding Spring
Grounding Spring
Packing Gland
Stem Screw
Handle Adapter
Pipe Handle
Gland Plate
Stops
Lock Plate
Stop Screws
Gland Plate Screws
Body Joint Stud
Body Joint Nut
Adapter Screw
Add desired suffixes in numerical order.
Not all possible combinations are available. Minimum quantities may apply.
(SUFFIX)
-14-21-24-26-
STEM FLATS
22
9
11
7
4
8
13
14
16
10
2
A
F
G
M
H
STEM FLATS
15
-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-
D
12
17
ØL
STEM
MOUNTING
UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Graphite packing, spiral wound graphite body seal,
RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-38-45-49-67-69-70-76-77-80-82-90-95-9P-EP-
E
18
OPTION
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Less lever and nut (bare stem)
No Lubrication. Assembled Dry.
Cleaned for industrial gas (CS only)
Drilled & tapped purge port with plugs
4" extended bonnet
Live loaded (lever operated)
Live loaded (gear operator or actuator)
Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing
Flat Face Flanges
Double Packed 4” Extended Bonnet
Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
Kolsterised ball
Gear operator with standard handwheel
Gear operator with standard handwheel & locking device
Gear operator with oversize handwheel
Gear operator with oversize handwheel & locking device
Positive material indentification
17-4 PH stem
Hydrostatic test with certified report
API 6D Test (hydrostatic testing)
Hydrostatic test with certified report & MTR
E
Hydrostatic test with certified report & witnessed 17 12 18
5
N
K
B
M
21
STEM FLATS
6
C
20
15
9
11
7
4
8
13
10
A
J
3
SQUARE
1
22
ØL
STEM
19
F
4
STEM FLATS
Ball
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
G
3
VARIATIONS AVAILABLE:
88A-F40 Series (316 SS Ball & Stem)
MATERIAL
ASTM A216-WCB
ASTM A216-WCB
ASTM A108 Type 1215 or
A216-WCB Chrome Plated
ASTM A108 Type 1215
Defined by Seat Suffix Selected
See “95” or “80” also “38” & “21”
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
316 Stainless Steel
316 Stainless Steel
ASTM A108 Type 1215
304 Stainless Steel
ASTM A366 Steel with Vinyl Grip
Galvanized Steel (not shown)
316 Stainless Steel
ASTM A108 Type 1215
ASTM A366 Steel
SAE J429 Grade 2
ASTM A193-B7
ASTM A193- Grade B7
ASTM A194- Grade 2H
18-8 Stainless Steel
H
1
2
PART
Body
Retainer
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-25, GRAPH NO. 35
PRODUCT
NUMBER
88A-F00-XX
88A-F0A-XX
D-102
SIZE
A
3”
4”
3.00
4.00
REV. 29JUN16
B
14.00
17.00
C
7.00
7.19
D
E
8.55
11.20
18.00
34.00
F
0.50
0.75
ACTUATOR MOUNTING
G
H
4.750
6.630
5.946
8.081
J
K
1.42
1.74
2.84
3.48
L
M
1.250
1.500
0.725
0.780
N
1
3/8-16
1/2-13
WT.
101.0
194.0C
5
3
6
B
www.apollovalves.com
Customer Service (704) 841-6000
21
2
88A-F00 SERIES
Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 6”
For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
Stem
5
Seats
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Body Seal
Stem Seals
Stem Bearing
Grounding Spring
Grounding Spring
Packing Gland
Stem Screw
Handle Adapter
Pipe Handle
Gland Plate
Stops
Lock Plate
Stop Screws
Gland Plate Screws
Body Joint Stud
Body Joint Nut
Adapter Screw
Add desired suffixes in numerical order.
Not all possible combinations are available. Minimum quantities may apply.
(SUFFIX)
-14-21-24-26-38-45-49-67-69-70-76-77-80-82-90-95-9P-EP-
E
13
22
12
ØL
STEM
18
16
9
11 7
STEM FLATS
10
8
14
2
F
H
4
A
G
UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Graphite packing, spiral wound graphite body seal,
RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Less lever and nut (bare stem)
No Lubrication. Assembled Dry.
Cleaned for industrial gas (CS only)
Drilled & tapped purge port with plugs
4" extended bonnet
Live loaded (lever operated)
Live loaded (gear operator or actuator)
Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing
Flat Face Flanges
Double Packed 4” Extended Bonnet
Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
Kolsterised ball
Gear operator with standard handwheel
Gear operator with standard handwheel & locking device
Gear operator with oversize handwheel
Gear operator with oversize handwheel & locking device
Positive material indentification
17-4 PH stem
Hydrostatic test with certified report
API 6D Test (hydrostatic testing)
E
Hydrostatic test with certified report & MTR
13
17
Hydrostatic test with certified report & witnessed
R MOUNTING
21
K
STEM FLATS
6
C
SQUARE
3
20
10
4
A
ACTUATOR MOUNTING
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-26, GRAPH NO. 36
SIZE
A
6”
6.00
B
22.00
18
16
9
11 7
8
B
PRODUCT
NUMBER
88A-F0C-XX
12
15
5
1
22
ØL
STEM
19
N
J
STEM FLATS
15
D
17
-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-
OPTION
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
F
4
STEM FLATS
Ball
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
H
3
VARIATIONS AVAILABLE:
88A-F40 Series (316 SS Ball & Stem)
MATERIAL
ASTM A216-WCB
ASTM A216-WCB
ASTM A108 Type 1215 or
A216-WCB Chrome Plated
ASTM A108 Type 1215
Defined by Seat Suffix Selected
See “95” or “80” also “38” & “21”
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
316 Stainless Steel
316 Stainless Steel
ASTM A108 Type 1215
304 Stainless Steel
316 Stainless Steel
Galvanized Steel (not shown)
316 Stainless Steel
ASTM A108 Type 1215
ASTM A366 Steel
SAE J429 Grade 2
ASTM A193-B7
ASTM A193-Grade B7
ASTM A194-Grade 2H
18-8 Stainless Steel
G
1
2
PART
Body
Retainer
C
9.94
D
E
14.17
45.00
F
1.00
G
H
J
8.190
9.915
2.298
K
3.48
L
M
2.000
1.375
1
N
3/4-10
5
WT.3
500.0
C
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
6
B
D-103
21
20
88A-F00 SERIES
Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 8”
For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
4
Stem
5
Seats
6
7
8
9
10
11
12
13
14
15
Body Seal
Stem Seals
Stem Bearing
Grounding Spring
Grounding Spring
Packing Gland
Gland Plate
Gland Plate Screws
Body Joint Stud
Body Joint Nut
12
11
Add desired suffixes in numerical order.
Not all possible combinations are available. Minimum quantities may apply.
(SUFFIX)
-14-21-24-26-
E
10
A
-EP-
5
2
14
3
6
C
15
B
13
M
ØL
10
8
E
45°
PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Less lever and nut (bare stem)
No Lubrication. Assembled Dry.
Cleaned for industrial gas (CS only)
Drilled & tapped purge port with plugs
4" extended bonnet
Live loaded (lever operated)
Live loaded (gear operator or actuator)
Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing
Flat Face Flanges
Double Packed 4” Extended Bonnet
Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
Kolsterised ball
Gear operator with standard handwheel
Gear operator with standard handwheel & locking device
Gear operator with oversize handwheel
Gear operator with oversize handwheel & locking device
Positive material indentification
17-4 PH stem
4
Hydrostatic test
with certified report
9
12 (hydrostatic testing)
API 6D
Test
11
Hydrostatic test with certified report & MTR
Hydrostatic7test with certified report & witnessed
F
1
-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-
D
22.5°
A
ØK
STEM
UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Graphite packing, spiral wound graphite body seal,
RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
H
G ±.001
OPTION
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-38-45-49-67-69-70-76-77-80-82-90-95-9P-
F
4
9
7
8
D
ØL
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
KEYSEAT
DEPTH
Ball
VARIATIONS AVAILABLE:
88A-F40 Series (316 SS Ball & Stem)
MATERIAL
ASTM A216-WCB
ASTM A216-WCB
ASTM A108 Type 1215 or
ASTM A216-WCB Chrome Plated
ASTM A108 Type 1215
Defined by Seat Suffix Selected
See “95” or “80” also “38” & “21”
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
316 Stainless Steel
316 Stainless Steel
ASTM A108 Type 1215
316 Stainless Steel
ASTM A193-B7
ASTM A193 Grade B7
ASTM A194 Grade 2H
KEYSEAT
DEPTH
3
H
1
2
PART
Body
Retainer
G ±.001
J
ØK
STEM
+.000
-.015
1
SIZE
A
8”
8.00
6
C
B
C
D
E
F
G
26.00
11.20
17.77
12.00
2.25*
0.627
H
5.77
J
2.133
K
2.49
LB
10.00
15
M
5/8-11
* Keyway Length
D-104 REV. 29JUN16
2
14
3
FOR PRESSURE/TEMPERATURE
RATINGS, REFER TO PAGE M-26, GRAPH NO. 36
ACTUATOR MOUNTING
PRODUCT
NUMBER
88A-F0E-XX
5
www.apollovalves.com
Customer Service (704) 841-6000
WT.
920.0
88L-F40 SERIES
Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1”
For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
12
16
-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-
13
1
M
STEM
FLATS
6
4
3
MOUNTING
C
PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Less lever and nut (bare stem)
No Lubrication. Assembled Dry.
Cleaned for industrial gas (CS only)
Drilled & tapped purge port with plugs
4" extended bonnet
Live loaded (lever operated)
Live loaded (gear operator or actuator)
Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing
Flat Face Flanges
Double Packed 4” Extended Bonnet
Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
Kolsterised ball
Gear operator with standard handwheel
Gear operator with standard handwheel & locking device
Gear operator with oversize handwheel
Gear operator with oversize handwheel & locking device
Positive material indentification
17-4 PH stem
Hydrostatic test with certified report
API 6D Test (hydrostatic testing)
Hydrostatic test with certified report & MTR
16
Hydrostatic test with certified report & witnessed
-EP-
10
5
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-38-45-49-67-69-70-76-77-80-82-90-95-9P-
2
A
G
-26-
9
11
7
17
14
8
H
-24-
E
15
ØL
STEM
UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Graphite packing, spiral wound graphite body seal,
RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
F
F
18
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
STEM
FLATS
Body Seal
Stem Seals
Stem Bearing
Grounding Spring
Grounding Spring
Packing Gland
Stem Screw
Lever
Gland Plate
Stop
Lock Plate
Spacer
Stop Screw
Gland Plate Screws
OPTION
2.25” Stem Extension (Carbon Steel, Zinc Plated) (1” - 2”)
19
ØL
STEM
N
A
J
M
STEM
FLATS
SIZE
A
B
C
D
E
F
1”
1.00
8.50
5.13
3.99
6.65
0.45
5
3
ACTUATOR MOUNTING
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-26, GRAPH NO. 37
PRODUCT
NUMBER
88L-F45-XX
12
17
14
8
K
SQUARE
B
G
6
7
8
9
10
11
12
13
14
15
16
17
18
19
(SUFFIX)
-04-14-21-
H
Seats
Add desired suffixes in numerical order.
Not all possible combinations are available. Minimum quantities may apply.
D
5
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316
ASTM A276-316
Defined by Seat Suffix Selected
See “95” or “80” also “38” & “21”
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
316 Stainless Steel
316 Stainless Steel
See Options Available
Steel, Zinc Plated
ASTM A366 Steel with Vinyl Grip
302 or 304 Stainless Steel
ASTM A108 Type 1215
ASTM A366 Steel
ASTM A276 Type 216
SAE J429 Grade 2 Steel Zinc Plated
ASTM A193 B7
STEM
FLATS
1
2
3
4
PART
Body
Retainer
Ball
Stem
G
H
1.730
2.460
J
K
0.98
1.95
L
M
N
WT.
0.625
0.412
5/16-18
13.0
C
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
B
D-105
88L-F40 SERIES
Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1.5”through 2.5”
For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
9
11
15
-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-
13
7
2
10
8
G
H
4
-EP-
M
A
D
F
STEM
FLATS
21
5
1
3
R MOUNTING
6
PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Less lever and nut (bare stem)
No Lubrication. Assembled Dry.
Cleaned for industrial gas (CS only)
Drilled & tapped purge port with plugs
4" extended bonnet
Live loaded (lever operated)
Live loaded (gear operator or actuator)
Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing
Flat Face Flanges
Double Packed 4” Extended Bonnet
Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
Kolsterised ball
Gear operator with standard handwheel
Gear operator with standard handwheel & locking device
Gear operator with oversize handwheel
Gear operator with oversize handwheel & locking device
Positive material indentification
17-4 PH stem
Hydrostatic test with certified report
API 6D Test (hydrostatic testing)
12
21
Hydrostatic test with certified report & MTR16
Hydrostatic test with certified report & witnessed
18
20
19
ØL
STEM
N
4
J
M
K
SQUARE
B
SIZE
A
1.5”
2”
2.5”
1.50
2.00
2.50
D-106 REV. 29JUN16
B
9.50
11.50
13.00
C
D
E
3.62
5.49
6.02
5.03
6.06
6.63
8.40
12.06
12.06
F
0.74
0.84
0.84
G
H
2.730
3.490
4.190
3.500
4.370
5.070
www.apollovalves.com
J
K
0.98
1.42
1.42
1.95
2.84
2.84
9
11
15
7
10
5
1
PRODUCT
NUMBER
88L-F47-XX
88L-F48-XX
88L-F49-XX
17
8
3
ACTUATOR MOUNTING
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-26-27, GRAPH NO. 37 & 38
E
14
G
C
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-38-45-49-67-69-70-76-77-80-82-90-95-9P-
17
12
14
STEM FLATS
-26-
E
16
ØL
STEM
-24-
UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Graphite packing, spiral wound graphite body seal,
RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
A
Body Seal
Stem Seals
Stem Bearing
Grounding Spring
Grounding Spring
Packing Gland
Stem Nut
Lever
Gland Plate
Stop
Lock Plate
Stop Screw
Gland Plate Screws
Body Joint Stud
Body Joint Nut
Lock Washer
OPTION
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
F
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
(SUFFIX)
-14-21-
STEM
FLATS
Seats
Add desired suffixes in numerical order.
Not all possible combinations are available. Minimum quantities may apply.
H
5
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316 or A351-CF8M
ASTM A276-316
Defined by Seat Suffix Selected
See “95” or “80” also “38” & “21”
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
316 Stainless Steel
316 Stainless Steel
ASTM A108 Type 1215
ASTM A194 Grade 8
ASTM A366 Steel with Vinyl Grip
302 or 304 Stainless Steel
ASTM A108 Type 1215
ASTM A366 Steel
SAE J429 Grade 2
ASTM A193 B7
ASTM A193 Grade B7
ASTM A194 Grade 2H
302 or ­304 SS
STEM FLATS
1
2
3
4
PART
Body
Retainer
Ball
Stem
L
M
N
0.750
1.000
1.000
0.477
0.620
0.620
5/16-18
3/8-16
3/8-16
Customer Service (704) 841-6000
C
6
WT.
31.5
53.0
65.0
B
20
19
88L-F40 SERIES
Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 3” through 4”
For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
PART
Body
Retainer
Ball
Stem
5
Seats
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Body Seal
Stem Seals
Stem Bearing
Grounding Spring
Grounding Spring
Packing Gland
Stem Screw
Handle Adapter
Pipe Handle
Gland Plate
Stops
Lock Plate
Stop Screws
Gland Plate Screws
Body Joint Stud
Body Joint Nut
Adapter Screw
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316 or A351-CF8M
ASTM A276 Type 316
Defined by Seat Suffix Selected
See “95” or “80” also “38” & “21”
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
316 Stainless Steel
316 Stainless Steel
ASTM A108 Type 1215
304 Stainless Steel
ASTM A366 Steel with Vinyl Grip
Galvanized Steel (not shown)
316 Stainless Steel
ASTM A108 Type 1215
ASTM A366 Steel
SAE J429 Grade 2
ASTM A193-B7
ASTM A193 Grade B7
ASTM A194 Grade 2H
18-8 Stainless Steel
Add desired suffixes in numerical order.
Not all possible combinations are available. Minimum quantities may apply.
(SUFFIX)
-14-21-24-26-38-45-49-67-69-70-76-77-80-82-90-95-9P-EP-
E
18
17
STEM FLATS
9
11
7
4
8
13
14
16
10
2
A
F
H
G
MOUNTING
UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Graphite packing, spiral wound graphite body seal,
RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Less lever and nut (bare stem)
No Lubrication. Assembled Dry.
Cleaned for industrial gas (CS only)
Drilled & tapped purge port with plugs
4" extended bonnet
Live loaded (lever operated)
Live loaded (gear operator or actuator)
Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing
Flat Face Flanges
Double Packed 4” Extended Bonnet
Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
Kolsterised ball
Gear operator with standard handwheel
Gear operator with standard handwheel & locking device
Gear operator with oversize handwheel
Gear operator with oversize handwheel & locking device
Positive material indentification
17-4 PH stem
Hydrostatic test with certified report
API 6D Test (hydrostatic testing)
Hydrostatic test with certified report & MTR
Hydrostatic test with certified report & witnessed
E
12
17
9
11
7
4
8
13
1
10
A
J
K
SQUARE
B
15
F
21
STEM FLATS
C
N
20
H
6
M
3
G
5
1
22
18
ØL
STEM
19
STEM FLATS
M
STEM FLATS
ØL
STEM
15
-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-
22
D
12
OPTION
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
ACTUATOR MOUNTING
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-27, GRAPH NO. 38
PRODUCT
NUMBER
88L-F40-XX
88L-F4A-XX
5
1
SIZE
A
3”
4”
3.00
4.00
B
14.00
17.00
C
7.00
7.19
D
E
8.55
11.20
18.00
34.00
F
0.50
0.75
G
H
4.750
6.630
5.946
8.081
J
K
1.42
1.74
2.84
3.48
L
M
1.250
1.500
0.725
0.780
N
3/8-16
1/2-13
WT.
3
101.0C
194.0
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
6
B
D-107
21
2
88L-F40 SERIES
Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 6”
For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
1
2
3
4
PART
Body
Retainer
Ball
Stem
5
Seats
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Body Seal
Stem Seals
Stem Bearing
Grounding Spring
Grounding Spring
Packing Gland
Stem Screw
Handle Adapter
Pipe Handle
Gland Plate
Stops
Lock Plate
Stop Screws
Gland Plate Screws
Body Joint Stud
Body Joint Nut
Adapter Screw
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316 or A351-CF8M
ASTM A276-316
Defined by Seat Suffix Selected
See “95” or “80” also “38” & “21”
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
316 Stainless Steel
316 Stainless Steel
ASTM A108 Type 1215
304 Stainless Steel
ASTM A366 Steel with Vinyl Grip
Galvanized Steel (not shown)
316 Stainless Steel
ASTM A108 Type 1215
ASTM A366 Steel
SAE J429 Grade 2
ASTM A193-B7
ASTM A193-Grade B7
ASTM A194-Grade 2H
18-8 Stainless Steel
Add desired suffixes in numerical order.
Not all possible combinations are available. Minimum quantities may apply.
(SUFFIX)
-14-21-24-26-
E
13
22
ØL
STEM
18
16
9
11 7
8
14
D
STEM FLATS
2
F
H
4
PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Less lever and nut (bare stem)
No Lubrication. Assembled Dry.
Cleaned for industrial gas (CS only)
Drilled & tapped purge port with plugs
4" extended bonnet
Live loaded (lever operated)
Live loaded (gear operator or actuator)
Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing
Flat Face Flanges
Double Packed 4” Extended Bonnet
Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
Kolsterised ball
Gear operator with standard handwheel
Gear operator with standard handwheel & locking device
Gear operator with oversize handwheel
Gear operator with oversize handwheel & locking device
Positive material indentification
17-4 PH stem
Hydrostatic test with certified report
API 6D Test (hydrostatic testing)
Hydrostatic test with certified report & MTR
E
Hydrostatic test with certified report & witnessed
13
17
A
G
STEM FLATS
15
10
-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-
12
UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Graphite packing, spiral wound graphite body seal,
RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-38-45-49-67-69-70-76-77-80-82-90-95-9P-EP-
17
OPTION
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
N
10
8
F
H
4
A
G
STEM FLATS
B
J
K
21
SQUARE
6
C
STEM FLATS
3
20
18
16
9
11 7
15
5
1
12
ØL
STEM
19
R MOUNTING
22
ACTUATOR MOUNTING
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-27, GRAPH NO. 39
PRODUCT
NUMBER
88L-F4C-XX
SIZE
A
6”
6.00
B
22.00
C
9.94
D
E
13.64
45.00
F
1.00
5
1
G
H
J
8.190
9.915
2.298
K
3.48
L
M
2.000
1.375
N
3/4-10
WT.
3
6
C
500.0
B
D-108 REV. 29JUN16
www.apollovalves.com
Customer Service (704) 841-6000
21
2
88L-F40 SERIES
Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 8”
For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST
4
9
7
8
10
G ±.001
ØK
STEM
-EP-
2
-KB-MG-MH-MJ-MK-MP-PH-TC-TD4
-TR- 9
-TW12
1
5
OUNTING
14
3
6
C
15
H
B
13
11
M
ØL
PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Less lever and nut (bare stem)
No Lubrication. Assembled Dry.
Cleaned for industrial gas (CS only)
Drilled & tapped purge port with plugs
4" extended bonnet
Live loaded (lever operated)
Live loaded (gear operator or actuator)
Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing
Flat Face Flanges
Double Packed 4” Extended Bonnet
Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Double Packed 4” Extended Bonnet with Monitoring Port
Garlock EVSP Stem Packing w/Spiral Wound
Graphite Gasket (Fire Safe by Design)
Kolsterised ball
Gear operator with standard handwheel
Gear operator with standard handwheel & locking device
Gear operator with oversize handwheel
Gear operator with oversize handwheel & locking device
Positive material indentification
17-4 PH stem
Hydrostatic test with certified report
API 6D Test (hydrostatic testing)
Hydrostatic test with certified report & MTR
Hydrostatic test with certified report & witnessed
7
8
10
E
45°
D
22.5°
A
J
+.000
-.015
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
-38-45-49-67-69-70-76-77-80-82-90-95-9P-
A
D
ØL
12
-26-
UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing
Graphite packing, spiral wound graphite body seal,
RPTFE bearing (API 607, 6th edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled dry.
F
11
M
-24-
OPTION
Side Vented Ball (Uni-Directional). Not available with plated CS ball.
KEYSEAT
DEPTH
Body Seal
Stem Seals
Stem Bearing
Grounding Spring
Grounding Spring
Packing Gland
Gland Plate
Gland Plate Screws
Body Joint Stud
Body Joint Nut
E
6
7
8
9
10
11
12
13
14
15
(SUFFIX)
-14-21-
F
Seats
Add desired suffixes in numerical order.
Not all possible combinations are available. Minimum quantities may apply.
KEYSEAT
DEPTH
5
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
MATERIAL
ASTM A352-LCC
ASTM A352-LCC
ASTM A276-316 or A351-CF8M
ASTM A276-316
Defined by Seat Suffix Selected
See “95” or “80” also “38” & “21”
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
Defined by Seat Suffix Selected
316 Stainless Steel
316 Stainless Steel
ASTM A108 Type 1215
316 Stainless Steel
ASTM A193-B7
ASTM A193 Grade B7
ASTM A194 Grade 2H
H
1
2
3
4
PART
Body
Retainer
Ball
Stem
G ±.001
J
ØK
STEM
+.000
-.015
1
2
14
3
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-27, GRAPH NO. 39
5
ACTUATOR MOUNTING
PRODUCT
NUMBER
88L-F4E-XX
SIZE
A
8”
8.00
6
C
B
C
D
E
F
G
26.00
11.20
17.77
12.00
2.25*
0.627
H
5.77
J
B
2.133
15
K
2.49
L
10.00
M
5/8-11
WT.
920.0
* Keyway Length
REV. 29JUN16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-109
SECTION D – ASME FLANGED BALL VALVES
REVISIONS
PAGE
D5 thru D94
DATE
12APR16
D55 thru D88 and
D100-109
29JUN16
D-110
DESCRIPTION
Added suffix “-KF”. PCTFE stem bearing.
Changed option suffix “-14” to Side Vented Ball (Uni-Directional). Not available with plated CS ball.
Changed option suffix “-26” to Chlorine Service. Vented. Special Cleaning. Assembled dry.
(for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)
www.apollovalves.com
Customer Service (704) 841-6000