Table of Contents Highspeed Handpieces 3 Electric Handpieces 15 Lowspeed Handpieces 19 Hygiene 33 Endodontics 37 Accessories 55 Repair 59 Check out our new products! pg 4 - Foresight Self Generating LED Highspeed pg 6 - Turbo Torque Ultimate Performance Highspeed pg 16 - B.A. 1:5 Electric Handpiece 2 Year Warranty pg 20 - Meditorque Elite An Elite Class of Lowspeed Dentistry pg 38 - One Shape NiTi Complete Shaping with One File Page pg 50 - Endo-Max Plus Rotary and Reciprocating Cordless Endo Handpiece pg 58 - EasyOil The Multipurpose Handpiece Lubrication Tool pg 60 - Repair Rewards Repair with Us and Get Rewarded! Highspeed handpieces Highspeed handpieces SELF GENERATING LED HIGHSPEED NEW! FORESIGHT™ SELF GENERATING LED HANDPIECES Available in Surgical & Non-Surgical Formats NO MORE! NO MORE FIBER OPTIC HASSLE BUILT-IN GENERATOR POWERS LED The micro generator embedded inside the handpiece activates a bright LED light when air flows through the handpiece. The direct LED light is located on the face of the handpiece, allowing the light to cover a large area. 4 • • • • • No more specialized fiber optic tubing! No more burnt out bulbs! No more glass rod deterioration! No more electrical source! Only simple and convenient LED illumination. TITANIUM COATED STAINLESS STEEL Titanium coated shells provide scratch, stain, and corrosion resistance for a long lasting and durable body. Highspeed Handpieces SELF GENERATING LED HIGHSPEED FORESIGHT 45 SURGICAL FEATURES 22 Watts of Power NO AIR IN THE ORAL CAVITY SURGICAL POCKET ILLUMINATION HIGH POWER, HIGH TORQUE Unlike most conventional surgical handpieces on the market today that allow air to escape from the back of the headcap, the Foresight 45 redirects the air exhaust to the pilot holes located at the rear of the handpiece. Ensuring all air is exhausted through the back-end for safer molar extraction. With bright LED optics pointed directly at your procedure site, the Foresight 45 will illuminate the surgical pocket better than any head lamp on the market. Capable of extreme power, delivering over 20 watts of constant torque for consistent cutting power even under the heavy load conditions that often occur while sectioning 3rd molars. The patented chuck design works to grip the bur tighter as the RPMs increase to minimize the risk of bur slippage and ensure patient safety. FORESIGHT 45 SURGICAL (4H) $799.99 | 1 Year Warranty | #FS-45S • • • Power - 22 Watts Ceramic Bearings Weight - 69.8g • • • Head Height - 13.6mm Head Diameter - 10.6mm Coupling - 4 Hole FORESIGHT - POWER HEAD (4H) $599.99 | 1 Year Warranty | #FS-SS • • • Power - 20 Watts Ceramic Bearings Weight - 71g • • • Head Height - 14mm Head Diameter - 12.3mm Coupling - 4 Hole FORESIGHT - MINI HEAD (4H) $599.99 | 1 Year Warranty | #FS-MS • • • Power - 18 Watts Ceramic Bearings Weight - 69.8g • • • Contact Us: 800-221-0750 / www.medidenta.com Head Height - 13.6mm Head Diameter - 10.6mm Coupling - 4 Hole 5 Highspeed handpieces HIGH PERFORMANCE HIGHSPEEDS Turbo Torque NEW! TURBO TORQUE™ - 2000 SERIES ULTIMATE PERFORMANCE 24 24 Watts of Power Warranty 24 WATTS OF POWER 24 MONTH WARRANTY The Turbo Torque offers an impressive 24 watts of power, which is among the highest in the industry from air driven highspeeds. This allows you to cut smoothly and confidently without any bog down. Experience more power and greater precision with the Turbo Torque. The innovative design and the highest quality parts, including ceramic bearings and titanium coating gives us the ability to back this handpiece for 2 years giving you added peace of mind. 6 Highspeed Handpieces HIGH PERFORMANCE HIGHSPEEDS HIGH TENSION CHUCK PATENTED IMPELLER DESIGN The unique chuck design is capable of holding up to 10lbs (over 40N) eliminating the risk of bur slippage ensuring patient and doctor safety. With a strong chuck force and inserted carbide ring design, the high tension chuck system also increases torque control and prevents the jamming of burs to extend the chuck’s lifespan. The patented design of airflow circulation allows the air to be guided by a special asymmetrical impeller and grooved back cap to speed up the exhaust airflow and reduce turbulence. This results in increased torque and constant speed, even under heavy load conditions. 1. 2. Air enters impeller Asymmetrical impeller 3. 4. Special design of back cap to lead the air Exhaust port QUAD (4) PORT WATER SPRAY Providing a fine mist to rise and cool the bur and working site during the procedure. TITANIUM EASY GRIP COATING Scratch and corrosion resistant for a long lasting shell. The anti-slip grip provides a comfortable and secure feeling during treatment. 25K LUX - BRIGHT FIBER OPTICS Delivers 25,000 LUX to your procedure site even after repeated sterilization. KAVO* MULTIFLEX COMPATIBLE Compatible with Kavo* Multiflex style couplers. TURBO TORQUE 2400 (POWER HEAD) $799.99 | 2 Year Warranty | #TT2400 • • • • Power - 24 Watts Ceramic Bearings Weight - 56g RPM - 300,000 • • • Head Height - 13.7mm Head Diameter - 12.3mm Coupling - Multiplex (Multiflex) TURBO TORQUE 2200 (MINI HEAD) $799.99 | 2 Year Warranty | #TT2200 • • • • Power - 20 Watts Ceramic Bearings Weight - 54g RPM - 350,000 • • • Contact Us: 800-221-0750 / www.medidenta.com Head Height - 12.5mm Head Diameter - 10.6mm Coupling - Multiplex (Multiflex) 7 Highspeed handpieces HIGH PERFORMANCE HIGHSPEEDS NEW! 20 Watts of Power TURBO TORQUE™ - 1000 SERIES OFFICE WORKHORSE PATENTED IMPELLER DESIGN Design of airflow circulation allows the air to be guided by a special asymmetrical impeller. UP TO 20 WATTS OF POWER Offering an impressive 20 watts of power allowing you to cut smoothly and confidently without any bog down. more details on pg. 7 HIGH RETENTION CHUCK Capable of holding up to 10lbs (over 40N) eliminating the risk of bur slippage ensuring patient and doctor safety. 3 PORT WATER SPRAY Ensuring that the bur and working site are properly cooled during the procedure. more details on pg. 7 TURBO TORQUE 1400 (POWER HEAD) $499.99 | 1 Year Warranty | #TT1400 • • • • Power - 20 Watts Ceramic Bearings Weight - 42.5g RPM - 300,000 • • • Head Height - 13.7mm Head Diameter - 12.3mm Coupling - 4 Hole TURBO TORQUE 1200 (MINI HEAD) $499.99 | 1 Year Warranty | #TT1200 • • • • 8 Power - 18 Watts Ceramic Bearings Weight - 40.5g RPM - 350,000 • • • Head Height - 12.5mm Head Diameter - 10.6mm Coupling - 4 Hole Highspeed Handpieces HIGHSPEEDS AIR KING™ HIGHSPEED BASIC SERIES AIR KING PUSH BUTTON $219.99 | Warranty - Shell: 1 Year / Turbine: 6 Months | #AK-CPB4H • • • • Ceramic Bearings Single Port Water Spray Weight - 58g RPM - 400,000 • • • Coupling - 4 Hole Head Height - 14.9mm Head Diameter - 11.2mm AIR KING PUSH BUTTON MINI $219.99 | Warranty - Shell: 1 Year / Turbine: 6 Months | #AK-CMPB4H • • • • Ceramic Bearings Single Port Water Spray Weight - 55g RPM - 420,000 • • • Coupling - 4 Hole Head Height - 11.89mm Head Diameter - 10.2mm AIR KING MANUAL CHUCK $169.99 | Warranty - Shell: 1 Year / Turbine: 6 Months | #AK-CSD4H • • • • Ceramic Bearings Single Port Water Spray Weight - 58g RPM - 400,000 • • • Coupling - 4 Hole Head Height - 13.4mm Head Diameter - 11.2mm AIR KING MANUAL CHUCK MINI $169.99 | Warranty - Shell: 1 Year / Turbine: 6 Months | #AK-CMSD4H • • • • Ceramic Bearings Single Port Water Spray Weight - 55g RPM - 420,000 • • • Coupling - 4 Hole Head Height - 10.36mm Head Diameter - 10.2mm AIR KING FIBER OPTIC PUSH BUTTON $309.99 | Warranty - Shell: 1 Year / Turbine: 6 Months | #AK-SBFOPB • • • • Ceramic Bearings Single Port Water Spray Celluar Optics Weight - 58g • • • • RPM - 400,000 Coupling - 5 Hole Head Height - 14.9mm Head Diameter - 11.2mm Contact Us: 800-221-0750 / www.medidenta.com 9 Highspeed handpieces SURICAL HIGHSPEED & INTRALIGAMENTARY SYRINGE NEW! AIR KING™ SURGICAL CLASSIC NEWLY REDESIGNED SURGICAL HIGHSPEED $599.99 | 1 Year Warranty | #AK-CSGS The newly designed 2015 Air King Surgical handpiece features vast improvements throughout the entire handpiece. It now offers superior torque for smooth cutting without bog down, a long lasting titanium coated stainless steel shell and also offers practitioners the capability of working with a completely air-free oral cavity. NO AIR IN THE ORAL CAVITY • • • • • • • • • • • No air into the entire oral cavity. Stainless Steel with Titanium Coating 45° angle for easy access to the third molar Pure water jetstream / non-atomized water spray Push button head Power - 22 Watts Ceramic Bearings Weight - 69.8g Head Height - 13.6mm Head Diameter - 10.6mm Coupling - 4 Hole No air escape through the head of the back of the headcap. All air is exhausted through the back-end for safer molar extraction. 22 Watts of Power MEDIJECT HIGH POWER, HIGH TORQUE Capable of extreme power, delivering over 20 watts of constant torque for consistent cutting power even under the heavy load conditions that often occur while sectioning 3rd molars. This power is also secured with a pattented chuck design which tightens the grip on the bur as the RPMs increase for doctor and patient safety. INTRALIGAMENTARY SYRINGE - Made in Italy $299.99 | 1 Year Warranty | #MJIS • • • • • • • • • • • • • 10 Automatic limitation of the power pressure. Anesthetizing of a single tooth. No numbness of the tongue, lips, or cheek. Simultaneous treatment of teeth in different quadrants. Supports regional block anesthesia. Eliminates the risk of haematoma. Lower emotional impact on patient. Fully autoclavable. Removable headpiece with angled threaded nozzle for the injection needle. Viewing chamber with safety sleeve for carpule cartridge. No waiting time between injection and start of procedure. Much less pain than standard injections 30 Gauge needle suggested. Highspeed Handpieces HIGHSPEED COUPLERS HIGHSPEED QUICK CONNECT COUPLERS & MORE 6-PIN LED COUPLER (KAVO STYLE) $269.00 | 1 Year Warranty | #MK-QC6016K • • • 6-Pin connection LED bulb Attach any Kavo style backend handpiece to this coupler • Allows for 360° swivel of the attached handpiece 5-HOLE FIBER OPTIC COUPLER (KAVO STYLE) $249.00 | 1 Year Warranty | #CP5M • • • • 5-Hole connection Glass rod conductor Attach any Kavo style back-end handpiece to this coupler Allows for 360° swivel of the attached handpiece 4-HOLE COUPLER (KAVO STYLE) $149.00 | 1 Year Warranty | #MK-QC4014K • • 4-Hole connection Attach any Kavo style back-end handpiece to this coupler • Allows for 360° swivel of the attached handpiece LED REPLACEMENT BULB $59.99 | #P-BU8012 • • Quick and easy chairside replacement 5500K daylight temperature • • LED (Light Emitting Diode) Up to 15X longer than conventional halogen light sources FIBER OPTIC EZ INSTALL $299.99 | 5 Year Warranty | Straight Tubing #FOEZKITC Coiled Tubing #FOEZKITS Simply change your handpiece tubing and plug it in and you have instantly added the fiber optic capabilities you have wanted in your unit. Accepts all standard 5-hole fiber optic handpieces. Easy, do it yourself installation. Contact Us: 800-221-0750 / www.medidenta.com 11 Highspeed handpieces HIGHSPEED PARTS AND ACCESSORIES FORESIGHT™ HANDPIECE PARTS AND ACCESSORIES FORESIGHT TORQUE HEAD TURBINE FORESIGHT MINI HEAD TURBINE $199.99 | 1 Year Warranty | #T-FSS $199.99 | 1 Year Warranty | #T-FSM FORESIGHT 45 SURGICAL TURBINE It is highly recommended that a Medidenta certified technician install all surgical turbines. $229.99 | 1 Year Warranty | #T-FS45 FORESIGHT POWER HEAD HEADCAP - $25.99 | #P-FSSHC FORESIGHT MINI / SURGICAL HEADCAP - $14.99 | #P-FS45HC FORESIGHT POWER HEADCAP WRENCH - $9.99 | #P-FSSCW FORESIGHT MINI / SURGICAL WRENCH - $9.99 | #P-FS45CW TURBO TORQUE™ HANDPIECE PARTS AND ACCESSORIES TURBO TORQUE 2400 (POWER) TURBINE TURBO TORQUE 2200 (MINI) TURBINE $279.99 | 1 Year Warranty | #T-TT2400 $279.99 | 1 Year Warranty | #T-TT2200 TURBO TORQUE 1400 (POWER) TURBINE TURBO TORQUE 1200 (MINI) TURBINE $259.99 | 1 Year Warranty | #T-TT1400 $259.99 | 1 Year Warranty | #T-TT1200 TURBO TORQUE 2400 HEADCAP TURBO TORQUE 2200 HEADCAP TURBO TORQUE 1400 HEADCAP TURBO TORQUE 1200 HEADCAP 12 - $49.99 $49.99 $49.99 $49.99 | | | | #P-TT24HC #P-TT22HC #P-TT14HC #P-TT12HC TURBO TORQUE CAP WRENCH LARGE - $9.99 | #P-TTSCW TURBO TORQUE CAP WRENCH SMALL - $9.99 | #P-TTMCW Highspeed Handpieces HIGHSPEED PARTS AND ACCESSORIES AIR KING™ HANDPIECE PARTS AND ACCESSORIES AIR KING PUSH BUTTON TURBINE AIR KING PUSH BUTTON CANISTER TURBINE Adult: $99.99 | 6 Month Warranty | #T-AKSPB Mini: $99.99 | 6 Month Warranty | #T-AKMPB Adult: $99.99 | 6 Month Warranty | #T-AKSPBC Mini: $99.99 | 6 Month Warranty | #T-AKMPBC AIR KING MANUAL CHUCK TURBINE AIR KING MANUAL CHUCK CANSITER TURBINE Adult: $64.99 | 6 Month Warranty | #T-AKSSD Mini: $64.99 | 6 Month Warranty | #T-AKMSD Adult: $64.99 | 6 Month Warranty | #T-AKSSDC Mini: $64.99 | 6 Month Warranty | #T-AKMSDC A.K. PUSH BUTTON HEADCAP - $24.99 | #P-AKHCPB A.K. PUSH BUTTON MINI HEADCAP - $24.99 | #P-AKHCMPB A.K. MANUAL CHUCK HEADCAP - $14.99 | #P-AKHCSD A.K. MANUAL CHUCK MINI HEADCAP - $14.99 | #P-AKHCMSD AIR KING™ SURGICAL CLASSIC HANDPIECE PARTS AND ACCESSORIES AIR KING SURGICAL CLASSIC TURBINE AIR KING SURGICAL TURBINE (To fit the previous green surgical model) $245.99 | 1 Year Warranty | #T-AKCSG AIR KING SURGICAL PUSH BUTTON HEADCAP - $29.99 | #P-AKCSG AIR KING SURGICAL CAP WRENCH - $19.99 | #P-AKCSGCW Push Button: $159.99 | 1 Year Warranty | #T-AKSGPB Manual Chuck $119.99 | 1 Year Warranty | #T-AKSGSD It is highly recommended that a Medidenta certified technician install all surgical turbines. OTHER PARTS AND ACCESSORIES 2/3 HOLE GASKET - $2.00 4/5 HOLE GASKET - $2.00 6 HOLE GASKET - $2.00 PLEASE CALL FOR ANY PARTS NOT LISTED. Contact Us: 800-221-0750 / www.medidenta.com 13 Highspeed handpieces HIGHSPEED HANDPIECE MAINTENANCE Step 1 Wipe down the handpiece with a damp disposable cloth to remove all debris. Choose the appropriate adapter for the back end of your handpiece and thread the adapter to the lubricant nozzle (i Spray recommended). Insert bur into handpiece. Do not use any chemical solutions for Step 2 Connect the nozzle adapter to the back end of the handpiece. Spray lubricant into handpiece for approximately 3 seconds. Count 1...2...3 Rotate bur back and forth between your fingers to further distribute the lubricant in the head of the handpiece and help loosen debris in that area. cleaning, do not submerge the handpiece in water/ultra sonic cleaner, or disinfectant Step 4 Remove bur and lubricate the chuck using the “Spindle” adapter on your can of lubricant or use a pen droplet oiler. Using an interproximal brush clean out the chuck. Tip: If the handpiece is a push button autochuck : Push the headcap to fully open the chuck, with the chuck held fully open, insert the bur in and out repeatedly to enact a plunging action. This will loosen any debris in the chuck. 14 Step 5 Step 3 Connect handpiece to an air supply. Before you apply air pressure; position the head of the handpiece within a paper towel. Run the handpiece for approximately. 10 seconds. If the purged lubricant on the paper towel is not clear, re-lubricate and purge until the fluid in completely clear. Continue to run the handpiece until all excess lubricant is expelled. Step 6 Clean the fiber optic glass (if the Bag and sterilize to the handpiece contains fiber optics) with a cotton swab and isopropyl alcohol. Be sure to clean the area on the back end and head. manufacturer’s instructions. Water ports may be cleaned when needed with a cleaning tool. Always allow handpiece to complete the drying cycle. Do not relubricate after sterilization. Do not sterilze with a bur installed. Do not exceed 275º F (135ºC) when autoclaving. Electric handpieces electric Handpieces ELECTRIC HIGHSPEED NEW! B.A. ELECTRIC 1:5 INCREASING CONTRA ANGLE MADE IN GERMANY 2 Year Warranty • • • 2 YEAR WARRANTY This German made handpiece is backed with a 2 year warranty so you can purchase with confidence. PVD Made in Germany Available with and without optics Lightweight and Ergonomic • • COATED WITH PVD This unique Physical Vapor Deposition coating provides greater protection against abrasive wear. It also reduces the tendency of materials to adhere to the body. Ceramic Bearings Triple Port Water Spray ELECTRIC 1:5 INCREASING ANGLE W/ OPTICS $894.99 | 2 Year Warranty | #BA-C/APBO1-5 • • • • 1:5 Increasing transmission Glass rod optics Max speed - 200,000 RPM Head height - 15.2mm • • • Head diameter - 9.72 Weight - 69.9g Coupling - INTRAmatic Lux ELECTRIC 1:5 INCREASING ANGLE $794.99 | 2 Year Warranty | #BA-C/APB1-5 • • • 16 1:5 Increasing transmission Max speed - 200,000 RPM Head height - 15.2mm • • • Head diameter - 9.72 Weight - 69.9g Coupling - INTRAmatic electric Handpieces ELECTRIC LOWSPEED JOULE LINE 1:1 ANGLE W/ OPTICS & PUSH BUTTON HEAD JOULE LINE 1:1 ANGLE W/ PUSH BUTTON HEAD (NON OPTIC) $745.00 | 1 Year Warranty $645.00 | 1 Year Warranty • • • • Latch Type: #J-PC/APBLO Friction Grip: #J-PC/APBFGO Glass rod light conductor INTRAmatic Lux fitting Max rpm: 40,000 RPM Push button head • • • • Latch Type: #J-PC/APBL Friction Grip: #J-PC/APBFG Max rpm: 40,000 RPM Accepts latch type burs Push button head INTRAmatic fitting JOULE LINE 1:1 NOSE CONE W/ OPTICS & INTERNAL WATER SPRAY JOULE LINE 1:1 NOSE CONE W/ INTERNAL WATER SPRAY (NON OPTIC) $500.00 | 1 Year Warranty | #J-PNC11O $350.00 | 1 Year Warranty | #J-PNC11 • • • Bright fiber optics Max speed: 40,000 RPM Accepts handpiece burs • • Internal water system INTRAmatic Lux fitting • • Max speed: 40,000 RPM Accepts handpiece burs • • Internal water system INTRAmatic fitting JOULE LINE 1:1 ANGLE W/ OPTICS JOULE LINE 1:1 ANGLE (NON OPTIC) $500.00 | 1 Year Warranty | #J-PC/A11O $350.00 | 1 Year Warranty | #J-PC/A11 • • • • • • • Glass rod light conductor INTRAmatic Lux fitting Compatible with Kavo®* heads Max speed: 40,000 RPM JOULE LINE PUSH BUTTON LATCH HEAD $245.00 | 6 Month Warranty | #J-PBLH1-1 • • • • Max speed: 40,000 RPM Accepts latch burs Push button Fits Joule Line and Kavo®* angles Compatible with Kavo®* heads Max speed: 40,000 RPM INTRAmatic Lux fitting JOULE LINE PUSH BUTTON FRICTION GRIP HEAD $279.99 | 6 Month Warranty | #J-PBFGH1-1 • • • • Max speed: 40,000 RPM Accepts friction grip burs Push button Fits Joule Line and Kavo®* angles Contact Us: 800-221-0750 / www.medidenta.com 17 electric Handpieces ELECTRIC ANGLE MAINTENANCE Step 1 Wipe down the handpiece with a damp disposable cloth to remove all debris. Do not use any chemical solutions for cleaning, do not submerge the handpiece in water/ultra sonic cleaner, or disinfectant Step 4 Step 2 Step 3 Spray lubricant into attachment Unscrew the head of the handpiece using the E-Type nozzle until you see the lubricant exiting the head of the attachment. Cover the head of the attachment with a paper towel. and remove the oblique shaft. Step 5 Step 6 Oblique Shaft Insert the oblique shaft into the “E” Spray lubricant for 2-3 seconds. type nozzle that is threaded to your can of lubricant. Insert the long end first which contains the lubrication hole. Assemble the attachment back together. 18 Bag and sterilize to the manufacturer’s instructions. Always allow handpiece to complete the drying cycle. Do not relubricate after sterilization. Do not sterilze with a bur installed. Do not exceed 275º F (135ºC) when autoclaving. LOWSPEED handpieces Lowspeed handpieces LOWSPEED HANDPIECES: E-TYPE Meditorque Elite 40K RPM Nose Cone Meditorque Elite 40K RPM Contra Angle Meditorque Elite 25K E-Type Motor NEW! MEDITORQUE™ ELITE AN ELITE CLASS OF LOWSPEED DENTISTRY 25% MORE POWER Capable of delivering a smooth and powerful 25,000 RPM, the new Meditorque Elite lowspeed line offers more power than most ‘E’ type motors on the market. 20 TITANIUM FINISHED STAINLESS STEEL The titanium finished shells are capable of withstanding the high demand of your office, preventing corrosion and scratches for long lasting operation. Made in Japan 1 YEAR WARRANTY Thanks to its strong and reliable build quality, we are proud to back this handpiece with a full 1 year warranty. lowspeed handpieces LOWSPEED HANDPIECES: E-TYPE MEDITORQUE ELITE MOTOR (25K) $399.99 | 1 Year Warranty | #ME-EM • • • • 0-25,000 RPM Forward and reverse settings Accepts all E-type attachments Made in Japan MEDITORQUE ELITE 3PC KIT $699.99 | Warranty - Motor: 1 Year / Attachments: 6 Months | #ME-KIT Includes: • 1 - Elite Motor (25K) • 1 - Elite Nose Cone (40K) • 1 - Elite Latch Contra Angle (40K) • Value of $809.97 - Save $110 ELITE LATCH TYPE CONTRA ANGLE (40K) $209.99 | 6 Month Warranty | Made in Japan | #ME-E40L • • • • Swing latch head Accepts latch type burs Max speed: 40,000 RPM Made in Japan ELITE PUSH BUTTON LATCH CONTRA ANGLE (40K) $259.99 | 6 Month Warranty | #ME-E40LP • • • • Push button head Accepts latch type burs Max speed: 40,000 RPM Made in Japan ELITE PUSH BUTTON FRICTION GRIP CONTRA ANGLE (40K) $299.99 | 6 Month Warranty | #ME-E40FGP • • • • Push button head Accepts friction grip burs Max speed: 40,000 RPM Made in Japan ELITE NOSE CONE (40K) $199.99 | 6 Month Warranty | #ME-EN • • • • Accepts straight grip burs Twist locking chuck Max speed: 40,000 RPM Made in Japan Contact Us: 800-221-0750 / www.medidenta.com 21 Lowspeed handpieces LOWSPEED HANDPIECES: E-TYPE MEDITORQUE™ “E” CLASSIC KIT $459.99 | Warranty - Motor: 1 Year / Attachments: 6 Months | #MD-EKIT Includes: • 1 - Classic Motor (20K) • 1 - Classic Nose Cone (20K) • 1 - Swing Latch Contra Angle (30K) • Value of $519.97 - Save $59.98 MEDITORQUE “E” CLASSIC MOTOR $239.99 | 1 Year Warranty • • • 0-20,000 RPM Forward and reverse settings Accepts all E-type attachments 4-Hole: #MD-E4H 2-Hole: #MD-E2H 1:1 CLASSIC NOSE CONE (20K) 1:1 CLASSIC LATCH TYPE ANGLE (30K) $109.99 | 6 Month Warranty | #MD-NC1-1 $169.99 | 6 Month Warranty | #ME-E30L • • • • • • Accepts handpiece burs and doriot contra angles Max rpm: 20,000 RPM E-type fitting 1:1 CLASSIC MINI LATCH TYPE ANGLE (20K) $169.99 | 6 Month Warranty | #ME-E20ML • • • Mini swing latch head Accepts latch type burs Max rpm: 20,000 RPM 22 Swing latch head Accepts latch type burs Max rpm: 30,000 RPM 1:1 CLASSIC FRICTION GRIP ANGLE (20K) (PUSH PULL) $169.99 | 6 Month Warranty | #ME-EPPFG • • • Push - Pull head Accepts friction grip burs Max rpm: 20,000 RPM lowspeed handpieces STRAIGHT / DORIOT HANDPIECES MEDITORQUE I $299.99 | 1 Year Warranty | • • • • 0-20,000 RPM Twist locking chuck Forward and reverse settings Accepts doriot contra angles, and lab burs MEDITORQUE II $349.99 | 1 Year Warranty | • • • • 4-Hole: #MD-I4H 2-Hole: #MD-I2H 4-Hole: #MD-II4H 2-Hole: #MD-II2H 0-5,000 RPM Twist locking chuck Forward and reverse settings Accepts lab burs and doriot contra angles MEDITORQUE H $319.99 | 1 Year Warranty | #MD-H • • • • 5,000 RPM Twist locking chuck Accepts doriot contra angles, lab burs, and prophy angles Hygienist handpiece PROPHY PRO (ROUTINE MAINTENANCE FREE) $449.99 | 1 Year Warranty | Made in Japan | #PROPHYPRO • • • • • • No lube required 5,000 RPM Accepts prophy angles only 360 degree swivel Lightweight Quiet handpiece helps to reduce patient anxiety MICROMITE HAWK $400.00 | 1 Year Warranty | #MI-HK • • • 5,500 RPM Twist locking chuck Accepts doriot contra angles, lab burs, and prophy angles Contact Us: 800-221-0750 / www.medidenta.com 23 Lowspeed handpieces SPECIALTY E-TYPE ATTACHMENTS K-ENDO ENDODONTIC HAND FILE RECIPROCATING ANGLE $499.99 | 6 Month Warranty | #K-ENDO This reciprocating handpiece accepts hand files to relieve stresses of hand filing manually. The push button head makes it easy to insert and remove the files. • • • • • Reciprocates hand files Attach this handpiece to any 20K rpm motor to run at 5,000 rpm Relieves the stresses of hand filing 4:1 gear reduction E-type fitting QUARTER TURN ENDO ENDODONTIC LATCH FILE RECIPROCATING ANGLE $399.99 | 6 Month Warranty | #MD-QTE4-1 The Quarter Turn Endo is a perfect solution for reciprocating all latch type endodontic files. Equipped with a push-up latch head, you can easily and safely install / remove files from the head. The body is geared to reduce the speed of the motor 4 times and increase the torque. • • • • Reciprocates latch files Attach this handpiece to any 20K rpm motor to run at 5,000 rpm 4:1 gear reduction E-type fitting INTERPROX “E” INTERPROXIMAL CONTRA ANGLE $499.99 | 6 Month Warranty | #INTXC/A 1.6 mm An “E” style contra angle that is ideal for any procedure which requires an back and forth reciprocating motion. The Interprox “E” is ideal for interproximal procedures such as reduction, polishing, enamel stripping or restorative orthodontic procedures. • • • • Small head for increased visibility for all procedures Attach this handpiece to any 20K rpm motor to run at 5,000 rpm 4:1 gear reduction E-type fitting TRAUS IMPLANT ANGLE HIGH POWERED IMPLANT ANGLE 1 Year Warranty The Traus Implant Angle is a high performance angle specifically designed for high torque implant procedures. • • • High torque - up to 65 N.cm Bright fiber optics available to illuminate the surgical site Smooth finish for easy maintenance • Push Button Non-Optic: $629.99 20:1 - #TR-C/APB20-1 32:1 - #TR-C/APB32-1 24 Optic: $799.99 20:1 - #TR-C/APBO20-1 32:1 - #TR-C/APBO32-1 lowspeed handpieces SPECIALTY E-TYPE ATTACHMENTS 4:1 REDUCTION NOSE CONE $169.99 | 6 Month Warranty | #MD-NC4-1 • • • • • Ideal for prophy applications Attach this handpiece to any 20K rpm motor to run at 5,000 rpm Twist locking chuck mechanism 4:1 gear reduction E-type fitting 4:1 REDUCTION CONTRA ANGLE (SWING LATCH) $249.99 | 6 Month Warranty | #MD-AL4-1 • • • • • Swing latch head Accepts latch type files Attach this handpiece to any 20K rpm motor to run at 5,000 rpm 4:1 gear reduction E-type fitting 4:1 REDUCTION CONTRA ANGLE (PUSH BUTTON) $309.99 | 6 Month Warranty | #MD-PBAL4-1 • • • • • Push button head Accepts latch type files Attach this handpiece to any 20K rpm motor to run at 5,000 rpm 4:1 gear reduction E-type fitting 10XE CONTRA ANGLE (5:1 REDUCTION) $659.99 | 6 Month Warranty | #MM10XE • • • • • 5:1 gear reduction Push button latch type head Stainless steel Accepts latch type files E-type fitting 16:1 REDUCTION CONTRA ANGLE $309.99 | 6 Month Warranty | #MD-AL16-1 • • • • • High torque 16:1 gear reduction Swing latch head E-type fitting Made in Japan AX’S ENDO (50:1 / 100:1 REDUCTION) $749.99 | 1 Year Warranty • • • Push button micro-head 20 degree angle for great visibility Auto-locking chuck 50:1 Reduction - #MM-AXS50 100:1 Reduction - #MM-AXS100 Contact Us: 800-221-0750 / www.medidenta.com 25 Lowspeed handpieces DORIOT STYLE ATTACHMENTS QUARTER TURN ENDO (DORIOT) STANDARD “U” (20K) $199.99 | 3 Month Warranty | #C/ADQTE $34.99 | 30 Day Warranty | #C/ADSU • • • • • • • • Reciprocates latch files 90 degrees Fits on all doriot (straight) motors and nose cones Push up latch head Made in Japan Fits on all doriot (straight) motors and nose cones Swing latch head Accepts latch burs Made in Japan MINI-HEAD (20K) BALL BEARING (40K) $129.99 | 30 Day Warranty | #C/ADM $159.99 | 3 Month Warranty | #C/ADBB • • • • • • • • Fits on all doriot (straight) motors and nose cones Mini swing latch head Accepts latch burs Made in Japan Ball bearing swing latch head Fits on all doriot (straight) motors and nose cones Accepts latch burs Made in Japan FRICTION GRIP - PUSH PULL (20K) 10:1 REDUCTION - PUSH BUTTON $129.99 | 30 Day Warranty | #C/ADFG $199.99 | 3 Month Warranty | #C/AD10-1 • • • • • • • • Fits on all doriot (straight) motors and nose cones Friction grip push-pull head Accepts friction grip burs Made in Japan 10:1 reduction push button head Fits on all doriot (straight) motors and nose cones Accepts latch burs or files Made in Japan PROPHYLAXIS SNAP-ON PROPHYLAXIS SCREW-ON $13.99 | 30 Day Warranty | #C/ADPK $13.99 | 30 Day Warranty | #C/ADPS • • • • • • Fits on all doriot (straight) motors and nose cones Accepts snap on prophy cups Made in Japan 26 Fits on all doriot (straight) motors and nose cones Accepts screw on prophy cups Made in Japan lowspeed handpieces REPLACEMENT HEADS ELITE 30K LATCH ELITE 20K MINI LATCH $69.99 | 90 Day Warranty | #ME-30L $69.99 | 90 Day Warranty | #ME-20L • • • • • • ELITE 40K LATCH 109.99 | 90 Day Warranty | #ME-40L • • • Swing latch head Accepts latch type burs Max rpm: 40,000 RPM Mini swing latch head Accepts latch type burs Max rpm: 20,000 RPM $159.99 | 90 Day Warranty | #ME-40LP $199.99 | 90 Day Warranty | #ME-40FGP • • • • • • Push button head Accepts latch type burs Max rpm: 40,000 RPM $99.99 | 90 Day Warranty | #HD-QTE $69.99 | 90 Day Warranty | #HD-STP • Friction grip push-pull head Accepts friction grip burs Max rpm: 30,000 RPM ELITE 40K PUSH BUTTON FRICTION GRIP SCREW TYPE PROPHY HEAD Reciprocates latch files 30 degrees Push up latch head • • • ELITE 40K PUSH BUTTON LATCH QUARTER TURN ENDO HEAD • $69.99 | 90 Day Warranty | #HD-PPFG • Accepts screw type prophy cups Push button head Accepts friction grip burs Max rpm: 40,000 RPM SNAP-ON PROPHY HEAD $69.99 | 90 Day Warranty | #HDSOTP • Accepts snap on / knob type prophy cups 42NCE HEAD 42XE HEAD $329.99 | 90 Day Warranty #MM-42NCE $329.99 | 90 Day Warranty | #MM-42XE MM 42PSO SNAP-ON PROPHY HEAD • • $209.99 90 Day Warranty #MM-42PSO • • Accepts latch type files Push up latch head * Oblique shaft not included Accepts latch type files Push button latch head * Oblique shaft not included MM 42PSI SCREW-ON PROPHY HEAD $209.99 90 Day Warranty #MM-42PSI Contact Us: 800-221-0750 / www.medidenta.com 27 * Oblique shaft not included Swing latch head Accepts latch type burs Max rpm: 30,000 RPM FRICTION GRIP - PUSH PULL (30K) Lowspeed handpieces STAR TYPE STAR TYPE COMPATIBLE WITH STAR TYPE FITTINGS STAR TYPE REPLACEMENT MOTOR MOTOR TO ANGLE ADAPTER 1 Year Warranty $149.99 | 6 Month Warranty | #ST-MADAPTER • • • Lube free motor Fully interchangeable and compatible with Star Titan systems Connects Star type motor to angles 20K RPM : $549.99 # ST-20KM 5K RPM : $449.99 # ST-5KM STAR TYPE STRAIGHT ATTACHMENT STAR TYPE TORQUE MULTIPLIER $294.99 | 6 Month Warranty | #ST-NC $209.99 | 6 Month Warranty | #ST-TM • • Straight nose cone for Star type motors Multiplies torque by 4, reduces speed by 4 STAR TYPE BALL BEARING LATCH ANGLE (20K) W/ ELBOW STAR TYPE BALL BEARING LATCH ANGLE (40K) W/ ELBOW $79.99 | 3 Month Warranty | #ST-20KL $149.99 | 3 Month Warranty | # ST-40KL • • Accepts latch type files • Max rpm: 20,000 RPM STAR TYPE BALL BEARING PUSH BUTTON LATCH ANGLE (40K) W/ ELBOW $189.99 | 3 Month Warranty | #ST-40KPBL • Accepts latch type files • Accepts latch type files • Max rpm: 40,000 RPM STAR SCREW TYPE PROPHY ANGLE $79.99 | 3 Month Warranty | #ST-SOP • Accepts screw type prophy cups Max rpm: 40,000 RPM STAR SNAP-ON PROPHY ANGLE STAR E-DAPTER $79.99 | 3 Month Warranty | #ST-SP $99.99 | 3 Month Warranty | #ST-EDAPTER • • Accepts snap-on / knob type prophy cups 28 Converts the Star type connection to a universal “E” type connection. Frees you to use more common attachments. lowspeed handpieces MIDWEST TYPE MIDWEST TYPE COMPATIBLE WITH MIDWEST TYPE FITTINGS MIDWEST CONTRA ANGLE SHEATH MIDWEST STRAIGHT NOSE CONE $99.99 | 3 Month Warranty | #MW-SHC/A $199.99 | 6 Month Warranty | #MW-NC • • • Accepts Midwest type heads Connects to Midwest type motors • Accepts straight burs, doriot contra angles, prophy angles Connects to Midwest type motors MIDWEST LATCH TYPE HEAD (20K) MIDWEST LATCH TYPE HEAD (40K) $49.99 | 3 Month Warranty | #MW-20KL $149.99 | 3 Month Warranty | #MW-40KL • • • • • • Accepts latch type files Swing latch head Max rpm: 20,000 RPM Accepts latch type files Swing latch head Max rpm: 40,000 RPM MIDWEST PUSH BUTTON LATCH HEAD (40K) MIDWEST SCREW TYPE PROPHY HEAD $169.99 | 3 Month Warranty | #MW-40KPBL $64.99 | 3 Month Warranty | #MW-SP • • • • Accepts latch type files Push button latch head Max rpm: 40,000 RPM Accepts screw type prophy cups MIDWEST SNAP-ON TYPE PROPHY HEAD MIDWEST E-DAPTER $64.99 | 3 Month Warranty | #MW-SOP $99.99 | 3 Month Warranty | #MW-EDAPTER • • Accepts snap-on / knob type prophy cups Converts the Midwest type connection to a universal “E” type connection. Frees you to use more common attachments. Contact Us: 800-221-0750 / www.medidenta.com 29 Lowspeed handpieces LAB UNIT AND MOTORS DENTI-LAB KIT HEAVY DUTY LABORATORY UNIT $499.99 | 1 Year Warranty • • • • • • • High torque at all speeds Variable speed range: 0-35K RPM Variable foot control Solid state transistorized feed-back circuitry maintains speeds under heavy loads Double rear cooling vents allow for continuos operation without overheating A heavy duty motor to withstand the laboratory environment No lube required KIT INCLUDES: • • • • Control box Motor Variable foot control Motor stand Denti-Lab Kit with Doriot Motor #DLDKIT Denti-Lab Kit with “E” Type Motor #DLEKIT DENTI-LAB DORIOT MOTOR $299.99 | 1 Year Warranty | #DLDM • • Accepts lab burs 0-35,000 RPM DENTI-LAB “E” TYPE MOTOR $299.99 | 1 Year Warranty | #DLEM • • Accepts any E-type attachment 0-35,000 RPM MYSTISA PORTABLE MOTOR $559.99 | 1 Year Warranty | #MYSTISA • • • • 30 Portable Rechargeable battery 3,000-20,000 RPM Forward and reverse lowspeed handpieces LOWSPEED MOTOR LUBRICATION Step 1 Step 2 Step 3 Wipe down the handpiece with a damp disposable cloth to remove all debris. Lubricate the handpiece using a Pen Oil, insert 2-3 drops of oil into the drive air tube. Do not use any chemical solutions for Note: Only lubricate motor every 4-5 autoclaves Lubricate the handpiece chuck and speed ring by inserting 1-2 drops of oil, then exercise (open and close chuck / turn speed ring side to side). cleaning, do not submerge the handpiece in water/ultra sonic cleaner, or disinfectant Below are some examples of where to lubricate 2-Hole 4-Hole 5-Hole Drive Air Tube (Lubricate Here) Step 4 Step 5 Run Motor for 10 seconds to ensure the lubricant has reached all moving parts. (If straight/doriot handpiece, insert a bur before running) Clean threads once a month using a brush or paper towel and isopropyl alcohol. Dry the exterior of the handpiece with a dry towel to remove any expelled fluid or debris. The handpiece should be completely dry at this point. Step 6 Bag and sterilize according to the manufacturer’s instructions. -Always allow handpiece to complete the drying cycle. -Do not sterilize with a bur installed. -Do not exceed 275º F (135ºC) when autoclaving. -Do not relubricate handpiece after sterilization. Contact Us: 800-221-0750 / www.medidenta.com 31 Lowspeed handpieces LOWSPEED ATTACHMENT LUBRICATION Step 1 Wipe down the handpiece with a damp disposable cloth to remove all debris. Do not use any chemical solutions for Step 2 Step 3 Spray lubricant into attachment Unscrew the head of the handpiece using the E-Type nozzle until you see the lubricant exiting the head of the attachment. Cover the head of the attachment with a paper towel. and remove the oblique shaft. cleaning, do not submerge the handpiece in water/ultra sonic cleaner, or disinfectant Step 4 Step 5 Insert the oblique shaft into the “E” Spray lubricant for 2-3 seconds. type nozzle that is threaded to your can of lubricant. Insert the long end first which contains the lubrication hole. Assemble the attachment back together. 32 Step 6 Bag and sterilize according to the manufacturer’s instructions. -Always allow handpiece to complete the drying cycle. -Do not sterilize with a bur installed. -Do not exceed 275º F (135ºC) when autoclaving. -Do not relubricate handpiece after sterilization. HYGIENE hygiene HYGIENE MOTORS PROPHY PRO ROUTINE MAINTENANCE FREE $449.99 | 1 Year Warranty | #PROPHYPRO • • • • • • • No lube required 5,000 RPM Accepts disposable prophy angles 360 degree swivel Lightweight Quiet handpiece to reduce patient anxiety Made in Japan MEDITORQUE H HYGIENE HANDPIECE WITH LOCKING CHUCK $319.99 | 1 Year Warranty | #MD-H • • • 5,000 RPM Accepts doriot contra angles, lab burs, and prophy angles Hygienist handpiece MEDITORQUE II 5,000 RPM HYGIENE MOTOR $349.99 | 1 Year Warranty | • • • 4-Hole: #MD-II4H 2-Hole: #MD-II2H 0-5,000 RPM Forward and reverse Accepts handpiece burs, doriot contra angles, and prophy angles MICROMITE HAWK 5,500 RPM HYGIENE MOTOR $400.00 | 1 Year Warranty | #MI-HK • • 34 5,500 RPM Accepts doriot contra angles, handpiece burs, and prophy angles hygiene SCALERS ULTRA SCALER THE MOST POWERFUL AND GENTLE AIR SCALER World’s first built-in vibrating generator produces frequency of 17,000 Hz at the tip while the traditional air-driven scalers provide 3,000 Hz to 6,500 Hz. This helps efficiently remove tough calculus, plaque, and stain. Made in Japan. BUILT IN GENERATOR With frequency up to 17,000 Hz. 3x the power of traditional air scalers QUIET Only slight noise and air exhaust sound are audible for maximum comfort SAFE Can be used on patients with implanted instruments such as pacemakers ULTRA SCALER (KAVO TYPE) $569.99 | 1 Year Warranty | #USCALKITQD • • Kavo compatible connection 3 tips included: 1x Perio, 1x Universal, 1x Sickle ULTRA SCALER (4-HOLE TYPE) $509.99 | 1 Year Warranty | #USCALKIT • • 4-Hole connection 3 tips included: 1x Perio, 1x Universal, 1x Sickle PERIO TIP UNIVERSAL TIP SICKLE TIP $59.99 | #USCALT1 $59.99 | #USCALT2 $59.99 | #USCALT3 • • • Designed for root / interproximal areas and sub / supragingival areas. Designed for curved surfaces and sub / supragingival areas. Contact Us: 800-221-0750 / www.medidenta.com For removing obstinate tar and stain adhesion 35 hygiene PROPHY ANGLES BY PROPHY MAGIC • • • 100% Latex Free Prophy Angles Disposable Choose from Soft, Firm, Mystic Cup or Mix & Match Buy Prophy Angles in Bulk and Save Never Buy a Hygiene Motor Again You know you are going to use them, you might as well stock up and save! For years Prophy Magic has saved offices thousands of dollars by offering these unique bulk offers. Buy in bulk and save more money, and spend less time worrying about restocking on angles. These unique bulk deals offer a way for offices to never purchase hygiene motors again. You can get them free instead! And if you don’t need any motors, we also offer deals that will load you up with extra prophy angles instead. Choose the deal that is right for you and your office. We offer Soft Cup, Firm Cup, and Mystic Cup. Mystic Cup features unique diamond shaped bumps on the outer surface which improves interproximal cleaning and lingual cleaning. It also has ribs inside the cup designed to control splatter. 1,000 2 Hygiene 1,700 + 1 Free + 500 Free Prophy Angles Hygiene Handpiece Handpieces Variety of Angles to Choose From Prophy Angles Prophy Angles 29¢ Each $500 Bulk Deal 1 Bulk Deal 2 $500 2,200 4 Hygiene + 2 Free + 1,200 Free Prophy Angles Hygiene Handpiece Handpieces $500 Bulk Deal 3 3,600 Prophy Angles Prophy Angles 27¢ Each Bulk Deal 4 36 $1,000 Bulk Deal 5 $1,000 Bulk Deal 6 $1,000 ENDODONTICS ENDODONTICS ROTARTY NITI INSTRUMENTS NEW! ONE SHAPE™ COMPLETE CANAL SHAPING WITH ONE FILE IN CONTINUOUS ROTATION Simplifying your endodontic procedures with complete safety and effectiveness is our primary concern. MICRO-MEGA® now offers you One Shape®, the one and only NiTi instrument that uses continuous rotation for quality root canal preparations. One Shape® allows for curved canal negotiation with an instrumental and easy dynamic. Its instrument design and non-working (safety) tip ensure an effective apical progression which will consistently produce high-quality results. • • • • Innovative design No need to buy an additional motor One instrument system Minimal fatigue along the length of the file virtually eliminates the risk of separation. NaOCl 2/3 WL 1. Take the One Shape down to two thirds of the working length using an in-and-out movement without pressure while preforming an upward circumferential motion. Withdrawal and cleaning of the file Patency check (#10 K file) NaOCl 2. WL -3mm Place the One Shape into the canal and take it to 3mm from working length with an in-and-out movement without pressure. Withdrawal and cleaning of the file Patency check (#10 K file) 3. Place the One Shape into the canal and take it working length with an in-and-out movement without pressure. Size: 25 • Taper: .06 • Available Lengths: 21, 25, 29mm • Speed: 350-400 RPM • Torque: 4 N.cm 38 WL ENDODONTICS ROTARTY NITI INSTRUMENTS ONE SHAPE BLISTER PACK READY TO USE STERILE PACKAGING $94.99 | Package of 5 Files • • • Contain 5 identical One Shape files Sterile packaging Available in 21mm, 25mm, 29mm 21mm #OSBP21 25mm #OSBP25 29mm #OSBP29 ONE SHAPE DISCOVERY KIT $269.99 | #OSDK The One Shape Discovery Kit contains all the rotary files need to complete an RCT. Covering coronal flaring, glide path, and shaping to working length, this Discovery Kit is a great start to using the One Shape files. • • • • 3 blister packs (15 files) Sterile packaging of One Shape files 1 Endoflare (orifice opening) 2 G-files (glide path files) ONE SHAPE APICAL FINISHERS READY TO USE STERILE PACKAGING $94.99 | Package of 5 Files • • • • • Apical Shaper 1: Size 30, .06 Taper Apical Shaper 2: Size 37, .06 Taper Contain 5 identical Apical Finisher files Sterile packaging Available in 21mm, 25mm, 29mm Apical Shaper 1 - 21mm #OSABP2130 Apical Shaper 1 - 25mm #OSABP2530 Apical Shaper 1 - 29mm #OSABP2930 Apical Shaper 2 - 21mm #OSABP2137 Apical Shaper 2 - 25mm #OSABP2537 Apical Shaper 2 - 29mm #OSABP2937 ONE SHAPE PROCEDURE PACK SIMPLIFIED INSTRUMENTAL MANAGEMENT NEW! $44.99 | Package of 5 Files | #OSPP • • • All your instruments, ready to use, in one sterile blister pack. Your solution which is ready for use in the patient’s mouth. Increased productivity by cutting down preparation time. Includes: • • • Endoflare (Coronal Flaring) K-File #10 One G (Glide Path) • • Contact Us: 800-221-0750 / www.medidenta.com K-File #15 One Shape 39 ENDODONTICS ROTARY NITI INSTRUMENTS REVO-S™ A CUSTOMIZED TREATMENT USING ONLY 3 INSTRUMENTS This sequence with 3 nickel-titanium instruments simplifies the initial endodontic treatment and optimizes canal cleaning. The asymmetrical cross section of the Revo-S™ facilitates penetration with a “snake-like” movement, and offers root canal shaping which is adapted to the biological and ergonomic imperatives. This sequence has a cutting, debris elimination and cleaning cycle which optimizes the root canal cleaning by improving the upward removal of the generated dentine debris. • • • • Enables better root canal penetration due to a "snake-like" movement. Facilitates the upward removal of debris with an asymmetrical cross section. Prevents the grooves from being obstructed preventing the extrusion of debris beyond the instrument tip and apical foramen. Reduces the stress on the instrument thanks to the rippling movement of the file along the canal walls: no screwing effect, more flexibility, better ability to negotiate curves. SC1. SC2. SU. Use SC1 with a slow downward movement in a free progression without pressure. Take the SC1 file to two-thirds of the working length. Use SC2 with a progressive 3 wave movement (up and down movement). Take the SC2 file to working length. Use SU with a slow downward movement without apical pressure, then check apical patency and if necessary, perform an upward circumferential filing movement. Size 25 / .06 taper Size 25 / .04 taper Size 25 / .06 taper Available Lengths: 21, 25, 29mm • Speed: 250-400 RPM • Torque: 0.8 N.cm 40 ENDODONTICS ROTARY NITI INSTRUMENTS REVO-S SOLUTION KIT A CUSTOMIZED INTRODUCTORY REVO-S ENDO KIT $199.99 | #REVOSOLKIT The Revo-Solution kit is equipped to handle 6 RCT’s, enough for you to get familiar with the Revo-S system. From working length to obturation, this kit has you covered. Includes: • • • • 6x Revo-S SC1 Files 6x Revo-S SC2 Files 6x Revo-S SU Files 3x K-Files (Assorted #8 - 15) • • • • 1x Endoflare (Orifice Opener) 1x G1 & G2 File (Glidepath Files) 1x Pack of Revo-S Gutta Percha 1x Pack of Revo-S Paper Points REVO-S / AX’S ENDO KIT $899.99 | #MM-AXS50KIT This kit is equipped to handle almost all of your RCT needs. From coronal flaring to obturation, the Ax’s Endo Kit has you covered. Includes: • • • • • • AX’s Endo® Handpiece 50:1 6 SC1 21mm 6 SC2 25mm 6 SU 25mm 2 AS30 25mm 2 AS35 25mm • • • • • 2 AS40 25mm 4 ENDOFLARE Files 1 SU Gutta Percha (pk of 60) 1 AS30 Gutta percha (pk of 60) 1 Sterilization box REVO-S INTRODUCTORY PACK ASSORTED 3 FILE PACKAGE $23.99 | Package of 3 Files • • Contains 3 files: SC1, SC2, SU Available in 21mm, 25mm, 29mm 21mm #REVOINTRO21 25mm #REVOINTRO25 29mm #REVOINTRO29 REVO-S BLISTER PACK READY TO USE STERILE PACKAGING $35.99 | Package of 5 Files • • • Contains 5 identical Revo-S files Sterile packaging Available in 21mm, 25mm, 29mm SC1 -21mm # REVOSC121 SC2 - 21mm # REVOSC221 SC2 - 25mm #REVOSC225 SC2 - 29mm #REVOSC229 SU - 21mm #REVOSU21 SU - 25mm #REVOSU25 SU - 29mm #REVOSU29 Contact Us: 800-221-0750 / www.medidenta.com 41 ENDODONTICS ROTARY NITI INSTRUMENTS APICAL SHAPER INSTRUMENTS These instruments enable efficient widening of the apical region to .06 taper, respecting the preparation performed with SC1, SC2, SU. This finishing enables an improved flow of the irrigation solution, promoting efficient disinfection and facilitated obturation. • • • • • • Shaping down to the working length; more accurate finishing of the apical 1/3. Efficient disinfection; the irrigating solution penetrates to the apical 1/3. Optimal Cleaning. The instruments dedicated to the apical area are tapered at .06. Asymmetrical cross section. The extended helical machining up to the coronal region enables a continuous bending of the instrument. AS30 AS35 AS40 Size 30 / .06 Taper Size 35 / .06 Taper Size 40 / .06 Taper Lengths: 21, 25, 29mm • Speed: 250-400 RPM • Torque: 0.8 N.cm APICAL SHAPER INTRODUCTORY PACK APICAL SHAPER BLISTER PACK $23.99 | Package of 3 Files $35.99 | Package of 5 Files • • 3 Files: AS30, AS35, AS40 21mm #REVOAINTRO21 25mm #REVOAINTRO25 29mm #REVOAINTRO29 42 5 Sterile identical instruments AS30 - 21mm #REVOA2130 AS30 - 25mm #REVOA2530 AS30 - 29mm #REVOA2930 AS35 - 21mm #REVOA2135 AS35 - 25mm #REVOA2535 AS35 - 29mm #REVOA2935 AS40 - 21mm #REVOA2140 AS40 - 25mm #REVOA2540 AS40 - 29mm #REVOA2940 ENDODONTICS ROTARY NITI INSTRUMENTS ENDOFLARE™ CORONAL FLARING INSTRUMENT $39.99 | Package of 4 Files | #ENDOFLARE ENDOFLARE® removes coronal constraints, improves access to canal entrances and facilitates the insertion of preparation instruments. • • • • • Wide taper (.12 no. 25). Short; access and maneuverability facilitated. Inactive tip; respects canal anatomy. Active; cutting cross-section to widen the canal. Excellent debris evacuation; no plug formation. 1 2 3 Initially open the canal with a Hand File size 10, length 21mm or 25mm. Insert the ENDOFLARE in the coronal third to a maximum depth of 3 mm using a gentle back and forth motion. In complicated cases, press lightly against the chamber walls in order to selectively debride the area. Size 25 • Taper Speed: 300-600 RPM • Torque: 3 N.cm NEW! ONE G GLIDEPATH FILES $84.99 | Package of 5 Files | #OSGBP Make glide path development quicker, more efficient and safer than stainless steel hand files with the One G (by limiting the risk of endodontic errors like the creation of constraints, ledge, false canal, non-respect of the canal transportation, etc.) The One G facilitates the progression of the shaping instruments in the canal thanks to the removal of constraints and parts of the canal content. • • • • • • Simplicity: only 1 single use instrument in continuous rotation for glide path development. Efficiency: time saving for the complete endodontic treatment. Safety: reassuring for the practitioner and resistant to breakage and unwinding thanks to its innovative cross-section and pitch. Respects and maintains the original canal anatomy. Excellent ability to negotiate curves, particularly in thin and curved canals. Infection risk control thanks to the sterile blister. Size: 14 Taper: .03 Length: 25mm Contact Us: 800-221-0750 / www.medidenta.com 43 ENDODONTICS RETREATMENT FILES R1 R2 R-ENDO RETREATMENT FILES R3 This method will enable you to remove filling and shape the root canal using only 4 NiTi instruments. There is no need to use a complementary shaping method after the R-Endo® instruments. • • • • Files specifically designed for ERT Rapid: only 4 instruments Simple: a protocol that is simple and easy to memorize Safe: Inactive tip You access each level of the radicular zone progressively. 1. K-File 2. Endoflare 2. R1 2. R2 2. R3 • 1/4 turn with pressure directed towards apex. • Removal. • Canal penetration: • Canal penetration • Preparation from • Insert R3 to WL or near WL according to the canal anatomy. 1-3 mm under pulp chamber floor without having to force the instrument. • Stop as soon as instruments requires force to penetrate • Circumferential filling. through repeated limited pushing actions in apical direction (push & retain). • Preparation from coronal third to the start of the middle third middle third to the start of the apical third. • Never pass the length reach with the hand file. Speed: 300-400 RPM R-ENDO ASSORTED PACK R-ENDO IDENTICAL PACK $24.99 | Package of 3 Files | #RENDO-ASST $45.99 | Package of 6 Files • • • • Includes 3 files: R1, R2, R3 Equipped with all 3 files to complete one case Includes 6 identical files Choose from R1, R2, R3 R1 #RENDO-R1 R2 #RENDO-R2 R3 #RENDO-R3 44 ENDODONTICS HAND FILES ISO COLOR CODE SIZE COLOR 8 GRAY 10 PURPLE 15 WHITE 20 YELLOW 25 RED 30 BLUE 35 GREEN 40 BLACK 45 WHITE 15-40 21MM HRI2108 HRI2110 HRI2115 HRI2120 HRI2125 HRI2130 HRI2135 HRI2140 HRI2145 HRI21A1 25MM HRI2508 HRI2510 HRI2515 HRI2520 HRI2525 HRI2530 HRI2535 HRI2540 HRI2545 HRI25A1 HAND REAMERS 25MM HKI2506 HKI2508 HKI2510 HKI2515 HKI2520 HKI2525 HKI2530 HKI2535 HKI2540 HKI2545 HKI25A1 K-TYPE FILES 25MM HHFI2508 HHFI2510 HHFI2515 HHFI2520 HHFI2525 HHFI2530 HHFI2535 HHFI2540 HHFI2545 HHFI25A1 HAND HEDSTROM FILES $9.99 | Package of 6 Files • • • • • Hourglass, color coded comfort handle Size clearly marked on each handle Tactile feel even with gloves Super sharp stainless steel Rubber stops on each file ISO COLOR CODE SIZE COLOR 6 PINK 8 GRAY 10 PURPLE 15 WHITE 20 YELLOW 25 RED 30 BLUE 35 GREEN 40 BLACK 45 WHITE 15-40 21MM HKI2106 HKI2108 HKI2110 HKI2115 HKI2120 HKI2125 HKI2130 HKI2135 HKI2140 HKI2145 HKI21A1 $9.99 | Package of 6 Files • • • • • Hourglass, color coded comfort handle Size clearly marked on each handle Tactile feel even with gloves Super sharp stainless steel Rubber stops on each file ISO COLOR CODE SIZE COLOR 8 GRAY 10 PURPLE 15 WHITE 20 YELLOW 25 RED 30 BLUE 35 GREEN 40 BLACK 45 WHITE 15-40 21MM HHFI2108 HHFI2110 HHFI2115 HHFI2120 HHFI2125 HHFI2130 HHFI2135 HHFI2140 HHFI2145 HHFI21A1 $9.99 | Package of 6 Files • • • • • Hourglass, color coded comfort handle Size clearly marked on each handle Tactile feel even with gloves Super sharp stainless steel Rubber stops on each file ISO COLOR CODE SIZE XXXX XXXF XXF XF FINE MEDIUM COARSE ASSORTD COLOR PURPLE WHITE YELLOW RED BLUE GREEN BLACK WHITE # BB4X BB3X BB2X BB1X BBF BBM BBC BBA BARBED BROACHES $10.99 | Package of 12 Files • • • Hourglass, color coded comfort handle Tactile feel even with gloves Super sharp stainless steel Contact Us: 800-221-0750 / www.medidenta.com 45 ENDODONTICS LE SH RRIG •I E• C AT AP E SONIC MM1500 AN • SONIC MM1500 SHAPE, IRRIGATE, DISINFECT CORONAL FLARING Easy and controlled orifice enlargement. CAVITATE IRRIGANTS Effectively circulates irrigants for complete canal disinfection, including lateral canals and isthmuses. CANAL SHAPING Safely debrides canals for easy instrument access. COMPLETE CANAL DISINFECTION • • • • Facilitates easier canal preparation and instrumentation. Cavitates irrigants for complete canal disinfection. The only endo handpiece that can clean an isthmus. Effectively removes debris in buccal and lingual extensions left unprepared by NiTi instrumentation. 46 NiTi systems are efficient in creating desirable canal shapes, but they leave 30-50% of the root canal system untouched, leaving behind breeding grounds for bacteria leading to inevitable root canal retreatment. The Sonic MM1500 will effectively cleanse and disinfect entire canal systems for increased endodontic success. ENDODONTICS SONIC MM1500 SONIC MM1500 PROFESSIONAL STARTER KIT $1475.86 | 1 Year Warranty | #MM1500KIT4H • • • Sonic MM1500 handpiece 12 Packs of Sonic files (72 files) • Mix and match files to fit your office’s needs Endo tray box SONIC MM1500 HANDPIECE ONLY $999.99 | 1 Year Warranty | #MM1500-4H • 4-Hole connection • Accepts all Sonic Files RISPI SONIC FILES $33.99 | Package of 6 Files SIZE COLOR 0 PURPLE 1 WHITE 2 YELLOW 3 RED 4 BLUE 5 GREEN 6 BLACK 19MM RSI1910 RSI1915 RSI1920 RSI1925 RSI1930 RSI1935 RSI1940 22MM RSI2210 RSI2215 RSI2220 RSI2225 RSI2230 RSI2235 RSI2240 The Rispi Sonic file is the most aggressive of the Sonic instruments. The cross section reveals 8 pointed cutting edges. Ideal for coronal flaring or obtaining straight line access into the canal. • • • Package of 6 files 2.5mm safe end High grade stainless steel SHAPER SONIC FILES $33.99 | Package of 6 Files SIZE COLOR 10 PURPLE 15 WHITE 20 YELLOW 25 RED 30 BLUE 35 GREEN 40 BLACK 21MM SSI2110 SSI2115 SSI2120 SSI2125 SSI2130 SSI2135 SSI2140 25MM SSI2510 SS2515 SSI2520 SSI2525 SSI2530 SSI2535 SSI2540 A cross section reveals 16 rounded cutting edges making the Shaper Sonic a medium aggressive instrument. It is used interchangeably with the Rispi Sonic as the main cutting instrument but also used for agitation with smaller file sizes. • • • Package of 6 files 1.5mm safe end High grade stainless steel TRIOSONIC IRRIGATORS $33.99 | Package of 6 Files SIZE 15 COLOR WHITE 21MM TSI2115 25MM TSI2515 The cross section of the Triosonic Irrigators reveals 3 beveled cutting edges. It is primarily used as a finishing and recapitulation instrument. It is not at all aggressive. • • • Package of 6 files No safe end High grade stainless steel Contact Us: 800-221-0750 / www.medidenta.com 47 ENDODONTICS RECIPROCATING ENDO ANGLES GIROMATIC THE ORIGINAL RECIPROCATING ENDO HANDPIECE $399.99 | 6 Month Warranty | #MM-GC/A15AD The patented Giromatic Contra Angle delivers 3,000 “quarter-turn” reciprocating movements per minute compared to an exhausting 150 times per minute by finger held hand instruments. Giromatics are designed to navigate through critically curved canals safely, without instrument breakage. • • Reciprocates latch files Doriot style connection: attaches to straight handpieces QUARTER TURN ENDO ENDODONTIC LATCH FILE RECIPROCATING ANGLE $199.99 | 6 Month Warranty | #C/ADQTE The Quarter Turn Endo is a perfect solution for reciprocating all latch type endodontic files. Equipped with a push-up latch head, you can easily and safely install / remove files from the head. • • Reciprocates latch files Doriot style connection: attaches to straight handpieces QUARTER TURN ENDO ENDODONTIC LATCH FILE RECIPROCATING ANGLE $399.99 | 6 Month Warranty | #MD-QTE4-1 The Quarter Turn Endo is a perfect solution for reciprocating all latch type endodontic files. Equipped with a push-up latch head, you can easily and safely install / remove files from the head. The body is geared to reduce the speed of the motor 4 times and increase the torque. • • • • Reciprocates latch files Attach this handpiece to any 20K rpm motor to run at 5,000 rpm 4:1 gear reduction E-type fitting K-ENDO ENDODONTIC HAND FILE RECIPROCATING ANGLE $499.99 | 6 Month Warranty | #K-ENDO This reciprocating handpiece accepts hand files to relieve stresses of hand filing manually. The push button head makes it easy to insert and remove the files. • • • • • 48 Reciprocates hand files Attach this handpiece to any 20K rpm motor to run at 5,000 rpm Relieves the stresses of hand filing 4:1 gear reduction E-type fitting ENDODONTICS RECIPROCATING FILES MM / E.C.C COLOR CODE SIZE 8 10 15 20 25 30 35 40 45 COLOR WHITE YELLOW RED BLUE BROWN BLACK WHITE YELLOW RED 21MM GHFM2108 GHFM2110 GHFM2115 GHFM2120 GHFM2125 GHFM2130 GHFM2135 GHFM2140 GHFM2145 ISO COLOR CODE 25MM GHFM2508 GHFM2510 GHFM2515 GHFM2520 GHFM2525 GHFM2530 GHFM2535 GHFM2540 GHFM2545 MM / E.C.C COLOR CODE MM / E.C.C COLOR CODE SIZE 8 10 15 20 25 30 35 40 45 COLOR WHITE YELLOW RED BLUE BROWN BLACK WHITE YELLOW RED 21MM GREM2108 GREM2110 GREM2115 GREM2120 GREM2125 GREM2130 GREM2135 GREM2140 GREM2145 25MM GREM2508 GREM2510 GREM2515 GREM2520 GREM2525 GREM2530 GREM2535 GREM2540 GREM2545 ISO COLOR CODE SIZE COLOR 8 GRAY 10 PURPLE 15 WHITE 20 YELLOW 25 RED 30 BLUE 35 GREEN 40 BLACK 45 WHITE 21MM SPFI2108 SPFI2110 SPFI2115 SPFI2120 SPFI2125 SPFI2130 SPFI2135 SPFI2140 SPFI2145 25MM SPFI2508 SPFI2510 SPFI2515 SPFI2520 SPFI2525 SPFI2530 SPFI2535 SPFI2540 SPFI2545 ISO COLOR CODE SIZE COLOR 15 WHITE 20 YELLOW 25 RED 30 BLUE 35 GREEN 40 BLACK 21MM PII2115 PII2120 PII2125 PII2130 PII2135 PII2140 25MM PII2515 PII2520 PII2525 PII2530 PII2535 PII2540 SIZE COLOR 21MM 8 GRAY GHFI2108 10 PURPLE GHFI2110 15 WHITE GHFI2115 20 YELLOW GHFI2120 25 RED GHFI2125 30 BLUE GHFI2130 35 GREEN GHFI2135 40 BLACK GHFI2140 45 WHITE GHFI2145 25MM GHFI2508 GHFI2510 GHFI2515 GHFI2520 GHFI2525 GHFI2530 GHFI2535 GHFI2540 GHFI2545 ISO COLOR CODE ISO COLOR CODE SIZE COLOR 21MM 8 GRAY GREI2108 10 PURPLE GREI2110 15 WHITE GREI2115 20 YELLOW GREI2120 25 RED GREI2125 30 BLUE GREI2130 35 GREEN GREI2135 40 BLACK GREI2140 45 WHITE GREI2145 25MM GREI2508 GREI2510 GREI2515 GREI2520 GREI2525 GREI2530 GREI2535 GREI2540 GREI2545 GIRO (HEDSTROM) FILES $24.99 | Package of 6 Files The Giro File is a cleaning instrument for the Giromatic. It is designed to cut only when withdrawn from the canal without packing debris towards the apex. • • Package of 6 files High grade stainless steel GIRO REAMERS $24.99 | Package of 6 Files Intended to be used in the Giromatic. Flexibility and strength are assured by a minimal twist manufacturing process. May also be used in a rotary contra angle, for post preparation or gutta percha removal. • • Package of 6 files High grade stainless steel SPIRAL FILLERS $24.99 | Package of 4 Files Fit into any latch-type contra angle. A spring anchor inside the shank ensures flexibility and makes it strong enough to pack paste. • • Package of 4 files High grade stainless steel PASTE INJECT $24.99 | Package of 4 Files Tapered flat wire fillers “Paste Inject” have been designed with greater capacity for holding canal sealer and introducing it into curved canals. This will apply paste evenly, coating the smallest and deepest discrepancies. • • Package of 4 files High grade stainless steel Contact Us: 800-221-0750 / www.medidenta.com 49 ENDODONTICS ENDO UNITS NEW! ENDO-MAX PLUS TWO IN ONE - ROTARY AND RECIPROCATING CORDLESS ENDO HANDPIECE $1199.99 | 1 Year Warranty | #ENDOMAXP Reciprocating Mode The default setting is 30° clockwise and 150° counterclockwise. The angles can be adjusted in 20° increments from 30° to 170°. Rotary Mode Complete clockwise rotation. • • • • • • • • • • Rotary and reciprocating functions Auto-Reverse Forward and Auto-Reverse Stop functions Cordless convenience offers complete portability Easy to read LCD display Heavy-duty high torque motor Ergonomic design provides comfort and easy operation Features 5 torque settings and nine rotation speeds available for different applications High capacity lithium-ion battery provides stable and prolonged usage Offers quick and easy coupling Low battery warning ENDO-CUBE COMPLETE ENDO UNIT WITH MOTOR $899.99 | 1 Year Warranty | #ENDOCUBE The Endo Cube kit comes equipped with everything you need in an endo unit and complete control of speed and torque settings. This kit even includes a 16:1 reduction endo contra angle. • • • • • • • • • • Auto reverse function upon overload sensor detection Torque control from 0.6 to 5.2 N.cm Speed range from 125 rpm - 13,000 rpm 9 programmable preset memorizing 16:1 reduction contra angle Foot control On/Off Switch Electrically power with a 5 hour battery life backup Compact designed controller including various functions Constant torque settings for safe control Operation available with battery or AC adapter Includes: • • • Control Box AC Adapter 16:1 Reduction Contra Angle 50 • • • Motor Handpiece Stand Foot Pedal ENDODONTICS APEX LOCATORS NEW! i ROOT FULL AUTOMATIC ELECTRONIC APEX LOCATOR $799.99 | 1 Year Warranty | #IROOT • • • • • • • • • • • • Best accuracy in any root canal condition (Dry, Bleeding, Wet, Saline, EDTA, NaOCI or Chlorhexidine etc...) Measurement by eye and ear at the same time Color display Stylish and ergonomic design Simple easy to use Self test for the system failure Long lasting(Semi-permanent) Li-ion battery with adapter Auto power off function for saving battery Stable and durable in wide range of condition Computer monitoring & Patient Management System(PMS) - Option Item. Includes: • • • • 1 i-ROOT Apex Locator 1 Probe cord 1 File holder A 2 File holder B • • • • 5 Lip holder 1 AC adaptor 1 Instruction manual 1 Battery • • 1 PC software CD (Option) 1 5m USB cable (Option) APEX NRG XFR ENDODONTIC DIGITAL APEX LOCATOR $689.99 | 50 Month Warranty | #APEXNRG Innovative digital signal processing and unique software guarantees the most accurate and reliable apex locator in all canal conditions including wet, dry, and bleeding. • • • • • Full indication of the file position, at an extra fine resolution of .25mm. Identification and filtration of momentary contact with crowns and amalgam fillings. Placement near patient’s mouth, within your line of vision. Audible alarm and user-friendly display 50 month warranty Includes: • • • Digital apex locator Lead cable set (2) Mini probe • • • Apron clasps (2) File clip cable Lip hooks (2) • • • Mini file clips (3) Disposable sleeves (20) Battery Contact Us: 800-221-0750 / www.medidenta.com 51 ENDODONTICS ENDO ACCESSORIES E&Q MASTER DESIGNED FOR WARM VERTICAL AND BACKFILL OBTURATION $1,899.99 | 1 Year Warranty | #EQMKIT • • • • • • The slim design provides a nice feeling of grip along with easy handling. The low-voltage battery enables safe operation. The simple operation enables you to learn easily and quickly. The thermo-plasticized method of filling makes speedy treatment. Easy and quick obturation with accurate and predictable filling. Excellent apical control & obturation of anatomically complicated canals. Includes: • • • • • Master Gun +Pen Charger Battery Gun Needle (23,25 Gauge / 6 pcs) Pen Tip (F,FM) • • • • Gutta Percha (04, 06 Taper, A/C Cone) Gutta Percha Point (Bar) Heat Insulator Adapter / Charging cord Accessories also sold separately, visit www.Medidenta.com for more information. GUTTA PERCHA POINTS PAPER POINTS $15.99 | 60 Points Per Package $9.99 | 60 Points Per Package • • 60 Points per package 60 Points per package 25 / .06 Taper: #RGP2506 25 / .04 Taper: #RGP2506 30 / .04 Taper: #RGP2506 35 / .04 Taper: #RGP2506 40 / .04 Taper: #RGP2506 Size 25: #PPSU2529 Size 30: #PPAS3029 Size 35: #PPAS3529 Size 40: #PPAS4029 MM EDTA MM SEAL $49.99 | #EDTA $59.99 | #MMSEAL Ensures effective cleaning and shaping of the root canal system. Its lubricating action smooths file penetration and facilitates the removal of debris. MM Seal is a high quality epoxy-resin based sealer for permanent filling of root canals. Its outstanding chemical and physical properties provide excellent sealing of root canals. Includes: • • 52 (2) 5.4ml (7g) Syringes Disposable tips Includes: • • • 13.5g Dual syringe Spatula Mixing plate ENDODONTICS ENDO ACCESSORIES METAPASTE METAPEX $27.99 | #MPASTE $27.99 | #MPEX Water soluble temporary root canal filling material consisting of Calcium Hydroxide with Barium Sulfate. Temporary root canal filling material with excellent radiopacity consisting of Calcium Hydroxide with Iodoform Includes: Includes: • • • • • • 2.2g paste in a syringe Disposable tips One ring rotator for direction control of tip 2.2g paste in a syringe Disposable tips One ring rotator for direction control of tip CALCINASE ENDO RING KIT $109.99 | 50ml Bottle | #CALCINASE $59.99 | #EAKIT Calcinase dissolves out calcium from enamel, dentin, and other calcium compounds. This results in a looser dental structure and aids in the mechanical preparation of the root canal. Does not produce corrosion of the mucosa. It can also be used to locate hidden root canal openings. A convenient way to hold endodontic instruments during a procedure. Features an easy-to-read ruler with rubber stop port, allowing quick measurements. Includes: • (1) Large Ring & Small Ring to fit all finger sizes, (25) Yellow Sponges (25) Green Sponges. • • Sponge Refill $14.99: #EAGYR LUER LOCKING SYRINGES OPTI-PROBE NEEDLE TIPS $35.99 | Bag of 100 Syringes $55.99 | Bag of 100 Needle Tips Non-sterile, luer-lock syringes with attached bendable, side-vent irrigating needle tips for irrigating surgical sites and periodontal pockets. Rounded, closed-end needle tips with side-port delivery. Tips eliminate hydraulic pressure and ensure a safer delivery of solutions. Fully encapsulated. 23 Gauge (Blue): #EICK23 27 Gauge (Yellow): #EICK27 30 Gauge (Purple): #EICK30 23 Gauge (Blue): #OPNT23 27 Gauge (Yellow): #OPNT27 30 Gauge (Purple): #OPNT30 Replacement Tips: $20.99 (Bag of 100) ENDO GUN CURVED SYRINGE X RAY GRIDS $74.99 $19.99 | Bag of 50 | #CUS $39.99 • Non-sterile, multipurpose curved tip syringe for endo irrigation or intraoral impression delivery. A simple way to determine the length of a root canal. Establishes position of an instrument or an endodontic point in a root canal. The millimeter squares of fine copper wire inside the grid allow accurate measurements. • For precise delivery of endodontic materials Available in curved and straight Posterior: #EGC (Approx. 42mm x 32mm) Anterior: #EGS (Approx. 32mm x 22mm) Curved: #EGC Straight: #EGS Contact Us: 800-221-0750 / www.medidenta.com 53 ENDODONTICS ENDO ACCESSORIES CLASSIC .02 TAPER NITI $34.99 | Packge of 6 Files The shaft is made of high quality nickel-titanium for additional flexibility in curved canals. The conical-shaped safe end provides resistance to ledging or transporting the canal. The 2015 design also features a new short brass shank for better accessibility and color coded rings. The file also includes millimeter markings for your convenience. • • • • • • Available in 21mm or 25mm lengths Available in sizes 15-80 .02 Taper Package of 6 files Short shank for better accessibility Compatible with all latch type handpieces MASSERANN KIT INSTRUMENT RETRIEVAL SYSTEM *All Masserann products are non-refundable MASSERANN COMPLETE KIT $1,149.99 | #MSRNKIT Kit Includes: • • Trepan Bur sizes 1.1-2.4 in short and long. 1.2 & 1.5 Extractors • • Canal Flat Gauge Handles and Bur Tool MASSERANN MINI KIT $329.99 | #MSRNMKIT Kit Includes: • • Trepan Bur sizes 1.2-1.3 in short and long. 1.2 Extractor REPLACEMENT TREPAN BURS EXTRACTORS $49.99 $74.99 • • • Available in sizes 1.1 - 2.4 Long and short lengths available 54 • • Bur Tool Mini Handle Available in sizes 1.2 and 1.5 *All Masserann products are non-refundable ENDODONTICS ACCESSORIES Contact Us: 800-221-0750 / www.medidenta.com 55 accessories ACCESSORIES MEDIJECT INTRALIGAMENTARY SYRINGE $299.99 | 1 Year Warranty | #MJIS • • • • • • • Automatic limitation of the power pressure. Anesthetizing of a single tooth. No numbness of the tongue, lips, or cheek. Simultaneous treatment of teeth in different quadrants. Supports regional block anesthesia. Eliminates the risk of haematoma. Lower emotional impact on patient. • • • • • • Fully autoclavable. Removable headpiece with angled threaded nozzle for the injection needle. Viewing chamber with safety sleeve for carpule cartridge. No waiting time between injection and start of procedure. Much less pain than standard injections. 30 Gauge needle suggested. CAUTERY KIT PORTABLE AND CONVENIENT CAUTERIZING $109.99 | 3 Month Warranty | #RCKIT This portable battery operated unit can quickly reach 2,200°F. It can perform for 30-40 minutes continuously on 2 double A batteries. This kit includes the hand held unit and 5 different interchangeable tips (see tips below). • • • • • • • Provides hemostasis Removes lesions and soft tissue Trims gingival tissue before impressions Portable with 5 interchangeable tips Battery operated (2 AA Batteries) Safe to use on patients with pacemakers Can cut gutta percha Replacement Tips T1 T3 T4 $10.99 ea T1: #RCT1 T2: #RCT2 T3: #RCT3 T4: #RCT4 T5: #RCT5 56 T5 T2 accessories ACCESSORIES ACCUCUT™ CARBIDE BURS PREMIUM QUALITY EUROPEAN BURS $129.99 | 100 Burs Per Pack Premium European quality carbide burs with higher concentricity, faster and smoother cutting, and improved finishing. • • • • Sizes available: 2, 4, 6, 8, 245, 330, 556, 557, 558 Single piece, not welded Package of 100 burs Made from high quality tungsten carbide Friction grip UNIBASE I $489.99 | 1 Year Warranty | Size 2: #ACBFG2 Size 4: #ACBFG4 Size 6: #ACBFG6 Size 8: #ACBFG8 Size 245: #ACBFG245 Size 330: #ACBFG330 Size 556: #ACBFG556 Size 557: #ACBFG557 Size 558: #ACBFG558 4-Hole: #UBDS4H 2-Hole: #UBDS2H The Unibase is a miniature control unit designed to mount on any vertical surface or on an arm making it ideal for custom installation. It features rugged sheet metal construction for long life. • • • Disc foot control Triomate 3-way syringe 2 air lines UNIBASE STANDALONE $999.99 | 1 Year Warranty | • • • • • 4-Hole: #UBTDS4H 2-Hole: #UBTDS2H Portable table top unit mounted on a powder coated 18-inch pole Disc foot control Built in clean-water system Triomate 3-way syringe 2 air lines Contact Us: 800-221-0750 / www.medidenta.com 57 accessories MAINTENANCE AND LUBRICATION NEW! EASYOIL THE MULTIPURPOSE HANDPIECE LUBRICATION TOOL $149.99 | #EO-MULTI The universal solution for a trouble-free handpiece care. EasyOil is the universal support that can conveniently gather up to five different adapters to meet all your dental handpiece maintenance needs. Effective handpiece care results in fewer failures and great savings on repair costs. EasyOil allows you to take care of your handpieces in an easy, fast and comfortable way because all you need is already there, readily at hand. With just a few simple steps, EasyOil will extend the life of your handpiece. Patented – 100% made in Italy • • Attach up to 5 different adapters to fit your handpieces Fits on all dental spray cans - no special can required Includes: 1 x ISO/E-Type (INTRAmatic) slow speed EasyAdapter 1 x Chuck Maintenance EasyAdapter EASYOIL ADAPTERS $24.99 Chuck #EO-C E-Type #EO-E 4-Hole #EO-M Kavo #EO-K NSK #EO-N W&H #EO-WH Bien Air #EO-BA I SPRAY PEN OIL $39.99 | #ISPRAY $12.99 | #POIL Lubricates all moving parts of handpiece while driving out debris utilizing pressured spray. • • I SPRAY NOZZLES $9.99 4/5 Hole #ISN-4/5 58 E-Type #ISN-LSE Spindle #ISN-CS Kavo #ISN-KAVO Sirona #EO-SI Castellini #EO-CI Convenient needle tip to dispense small amount of oil to handpieces or handpiece parts. 30cc of lubricant Highspeed Handpieces HANDPIECE REPAIRS Contact Us: 800-221-0750 / www.medidenta.com 59 handpiece repair REPAIRS HANDPIECE REPAIRS IN-HOUSE MEDIDENTA REPAIR DEPARTMENT Medidenta’s Repair Department offers quality in-house repairs for all major brands of highspeed and lowspeed handpieces and much more. Along with quality repairs, we offer free estimates, 24-48 turn around, and 6-12 month warranties on most repairs. Repair Rewards We reward our loyal repair customers, so repair with us and get rewarded! • • • • • • Trade-In Program Trade in your used and worn down handpieces for discounts towards brand new handpieces. Free warranty tracking provided for all repairs. Technical support provided by experienced technicians. 6-12 month warranty on most repairs. Quality OEM and generic parts and turbines available. 24-48 hour turn-around. Repair all major brands of highspeed and lowspeed handpieces and attachments. Free UPS Pick Up Ask an Expert We offer free UPS pick up directly from your office. Call or click to schedule a free pick up. Have any questions about repairing or maintaining your handpieces? Give us a call! • • • For your convenience, we provide a pre-paid shipping label. All repairs tested to manufacturer’s specifications. Free estimates provided upon request We know you have many companies to choose from to repair your handpieces, and we truly feel honored that you chose us. In return, we decided to reward our customers for staying with us for the long haul. Below you will find two rewards offers that you can choose from every time you repair 10 handpieces with us. All you need to do is repair 10 individual handpieces with us, at a minimum repair value of $150 each. Then you can choose one of the gift options for your reward. 60 handpiece repair REPAIRS Highspeed Repairs Turbine Replacement Auto-chuck Conversion Fiber Optic Replacement • • • • • OEM and high quality generic turbines available for most brands. No charge for turbine installation or testing Bearing replacement available • Convert your manual chuck into an autochuck system. No more bur tool! No charge for turbine installation or testing • We replace glass rods and fiber optics Fiber optics can be replace in most highspeed brands Lowspeed Repairs Overhauls and Rebuilds Attachments Scalers • • • We rebuild and overhaul with high quality bearings and components to OEM standards. • We service all attachments including nose cones and contra angles. We also service and replace lowspeed attachment heads. We service air scalers for most major brands. We Also Service • • • • • Endo handpieces Lab units Electric handpieces Surgical handpieces Implant handpieces Contact Us: 800-221-0750 / www.medidenta.com 61 Highspeed handpieces Return & Exchange Policy Items purchased from Medidenta are guaranteed with a 30 day return policy. When your order is received, please examine it carefully. If for any reason, you are not satisfied, please call 800-221-0750 for a valid Return Merchandise Authorization (RMA) number and have your invoice available for reference. Upon receipt of the returned product, Medidenta will exchange, refund or credit the item, less adjustments for shipping and handling. All products must be returned unused, unmarked and in original packaging with seal unbroken. Claims must be reported within 30 days of invoice date. All returned merchandise is subject to inspection. Any merchandise returned to Medidenta in an unsellable condition will NOT be eligible for credit. Return for Refund or Exchange: 30 Days Restocking fees apply: 15% of Final Price Return Address: Medidenta Returns 3325 Ali Baba Lane - Suite 603 Las Vegas, NV 89118 • Customer must request a return for refund within 30 days after invoice date. No refunds are issued after 30 days. • All returns should be shipped in a traceable manner such as Fed-ex or UPS. The shipment fee is non-refundable. Medidenta will not be responsible for any shipping loss. • Customer agrees to pay for all shipping charges and accept risk of loss or damage for the product being returned. • Items returned must be returned new, unused, resalable condition without any markings and in original packaging with seal unbroken. Damaged merchandise will not be eligible for return. • All returns require a Return Merchandise Authorization (RMA) number. Medidenta will not accept any return without a valid RMA number. The package will be returned at sender’s expense. • Returns must include a copy of the original invoice. Credit cannot be issued without a copy of the original invoice. • Please allow 5-7 business days to process your return. • Medidenta reserves the right to refuse service that would void the return policy. • Please note not all items are covered by our return policy. OSHA regulations prohibit the return of syringes, needles, solutions etc. • No credit on special orders or drop shipments from the supplier. Return Merchandise Authorization Number (RMAs) Returned Authorization Numbers will be valid for a period of 30 Days from the date of issuance. Returned merchandise received after the expiration date will NOT be accepted for credit. Customer is responsible for the care of the returned items and the insurance through the shipping carrier. Any product received without a valid RMA number will be returned to sender. All items may be subject to restocking fee. Order Discrepancies or Damaged Shipments Customers must inform Medidenta of any missing, damaged or incorrect items from your order within 7 days of the delivery date. In case of damaged merchandise, please keep the original packaging and contact your delivery company (UPS) for a damage inspection report. Please contact our Customer Service Department at 800-221-0750 to review the order and we will respond within 48 hours. Price Adjustments Prices are subject to change at any time. We offer one-time price adjustment if an item is marked down within fourteen (14) days of the date on your invoice. To obtain a price adjustment, please call 800-221-0750 with your invoice ready. If you are within the deadline, we’ll refund you the difference in your original form of payment. Items purchased with a promotional discount are NOT eligible for price adjustments. Disclaimer Products in this catalog are intended for use by licensed dentists only. Medidenta is not responsible is not liable for typographical errors. For any other questions regarding returns and exchanges, please call us at 800-221-0750 Monday through Friday 7am to 5pm PST. We thank you for your loyalty and look forward to your business. *Medidenta is in no way affiliated with Kavo. Kavo is a trademark of the Kavo corporation. 62 Highspeed Handpieces notes Contact Us: 800-221-0750 / www.medidenta.com 63