For Technical Assistance Call (516) 486-3538
Monday – Friday 9:30am – 5:00pm Eastern Time
Compumatic TR220d Quick Setup Guide
Clocks are Preconfigured with the following Settings:
Weekly pay period
Week start Monday
Eastern Time
Daylight Savings ON
Standard 1-12 hour AM/PM
Day change at midnight
Remove cover of clock using key provided. Slide the “Set” switch to the right into set mode (o).
Program 00: Year
Items on screen:
(20) (current year)
The second 2 digits will be flashing. Using + or – keys select correct year, press Enter to save value.
Program 01: Date
Items on screen:
(month) (date)
Month will be flashing, use + or – to select correct month, press Enter. Date will now flash, select correct
date, press Enter.
Program 02: Time System
12 = 12hr “am/pm” 24 = 24hr “military time” Example 2:00pm = 14:00
Display will show 12 or 24. Select desired format using + or -, press Enter.
Program 03: Time
Items on screen:
(hour) (minutes)
Hour will be flashing, use + or – to select correct hour, press Enter. Minutes will now flash, select correct
minute, press Enter.
Program 04: Day Change
Items on screen:
(hour) (minute)
Day Change: Defines the time the clock changes from one day to the next.
Use + or – to set the Hour, press Enter. Minute will now be flashing, select minute, press Enter.
Program 05: Pay Period
Items on screen:
(pay period) (card type)
Pay Period: 00 = Monthly
01 = Weekly
Select desired Pay Period, press Enter.
02 = Bi-weekly
For Technical Assistance Call (516) 486-3538
Monday – Friday 9:30am – 5:00pm Eastern Time
*If Weekly or Bi-weekly pay period is selected, an arrow will appear. This arrow points to your Day
Ending. Pressing Clear will advance the day. Select the pay period ending day then press Enter.
Card Type:
04 = Weekly
03 =Bi-weekly 1st Week
04 = Bi-weekly 2nd Week
00 = Monthly
Use + or – to set the desired Card Type, press Enter.
Program 06: Daylight Savings Time (Start)
Items on screen:
(month) (date)
Program is used to set up rules for the clock to automatically change time in the spring. Daylight savings
time starts on the second Sunday in March. 2016 start date is 3/13.
Month will flash, use + or – to set the select month, press Enter. Date will flash, select date, press Enter.
Program 07: Daylight Savings Time (Start)
Items on screen:
(hour) (minutes)
Program used to set spring daylights savings time change. This setting should be set to occur at 2:00 AM.
Using + or – keys select correct hour, press Enter, select correct minute, press Enter.
Program 08: Daylight Savings Time (End)
Items on screen:
(month) (date)
Program is used to set up rules for the clock to automatically change time in the fall. Daylight savings time
ends on the first Sunday in November. 2016 end date is 11/6.
Month will flash, use + or – to set the select month, press Enter. Date will flash, select date, press Enter.
Program 09: Daylight Savings Time (End)
Items on screen:
(hour) (minutes)
Program used to set fall daylights savings time change. This setting should be set to occur at 2:00 AM.
Using + or – keys select correct hour, press Enter, select correct minute, press Enter.
Program 10: Vertical Print Position
This setting adjusts the vertical print position. The default print position should be set to 01. Increasing the
number will move the print upwards. Using + or – keys set the print position then press Enter.
Program 11: Horizontal Print Position
This setting adjusts the horizontal print position. The default print position should be set to 05. Increasing
the number will move the print to the right. Using + or – keys set the print position then press Enter.
Your clock is now programmed. Slide the “Set” switch to the left out of set mode (-).