integration 2011 catalogue

advertisement
INTEGRATION
2011
CATALOGUE
DIGITAL TIME SWITCH with LCD backlit display - 2 DIN
• Power supply voltage: 230V a.c. 50 - 60Hz
• Potential-free NC contact 16(2) A / 250V a.c.
• Max. commutable power: 3.500 VA (for individual contact)
• Power: Incandescent LPs 2.300 W
• Power: Fluorescent tube LPs, not compensated 1.000 W
• Power: Parallely comp. fluorescent tube LPs 500W (tot capacity 70 microF)
• Power: Compact, fluorescent LPs 600W
• 6 mm2 wire terminals with captive screw
• Operating temperature limits: 0°C +50°C
• Big LCD backlit display, 1”1/3
• Daily or weekly
• One or two relay control outputs
• 20 freely settable ON/OFF programs (matchable in blocks of days)
• ON/OFF programming minimum time: 1 second
• With or without automatic standard time/daylight saving time change
• EEPROM memory for program saving
• Charge reserve: max. 15 days
• Hinged and sealable protection cover
• Possibility of permanent manual ON / OFF forcing
• Type of installation: DIN rail / on the rear of the switchboard
• Dimensions (LxWxH): 35 x 60 x 30 mm
code
description
Digital time switches with automatic standard time/daylight saving time change
1IO 7080
Daily digital time switch 1 channel, 2 DIN - 1 potential-free changeover contact
1IO 7081
Weekly digital time switch 1 channel, 2 DIN - 1 potential-free changeover contact
1IO 7281
Weekly digital time switch 2 channels, 2 DIN - 2 potential-free changeover contacts
Digital time switches without automatic standard time/daylight saving time change
1IO 6080
Daily digital time switch 1 channel, 2 DIN - 1 potential-free changeover contact
1IO 6081
Weekly digital time switch 1 channel, 2 DIN - 1 potential-free changeover contact
PROGRAMMING SOFTWARE FOR YEARLY TIME SWITCHES WITH MEMORY KEY
code
description
1IO SW001
Programming software for PC for yearly menu driven digital time switches with memory key
1PR AUSB01
USB adaptor for memory key "EMD"
OUTDOOR INFRARED MOTION DETECTOR for wall mounting - IP55
• Power supply voltage: 230V a.c. 50Hz
• Power: Incandescent LPs 2.000 W
• Power: Fluorescent tube LPs, max 480W CFL 8
• Detection angle: 240°
• Max detection distance: 12 m
• Lighting limit adjustment: 5 – 1.000 Lux
• Adjustment of deactivation delay: 5 sec – 12 min
• Sensitivity adjustment: 3 – 12 m
• Swivelling angle: horizontal 180° (limitable)
• Type of installation: wall-mounting, internal or external corner with supplied accessory
• Protection degree: IP55
• Dimensions (LxWxH): 72 x 106 x 88 mm
• Equipped with adapter for installation in corners
• Possibility of limiting the detection range of the lens
obscuring the segments both horizontally and vertically
• Possibility of manual override to keep the light switched
on for 4 hours disabling the action of the sensor
code
description
1SP SP006
Outdoor infrared motion detector for wall mounting - IP55 - BLACK
INFRARED MOTION DETECTOR for wall mounting - IP44
• Power supply voltage: 230V a.c. 50Hz
• Power: Incandescent LPs 1.000 W
• Power: Fluorescent tube LPs, max 400W CFL 8
• Detection angle 180°
• Max detection distance: 12 m
• Lighting limit adjustment: 0–1.000 Lux
• Adjustment of deactivation delay: 5 sec–12 min
• Rotation angle of the detection head: horizontal 70°,vertical 35°
• Type of installation: wall-mounting
• Protection degree: IP44
• Dimensions (LxWxH): 65 x 88 x 95 mm
code
description
1SP SP011
Infrared motion detector for wall mounting - IP44 - BLACK
INFRARED PRESENCE DETECTOR for semi recess mounting in ceiling
• Movements and micro-movements detector
• Power supply voltage: 230V a.c. 50Hz
• Power: Incandescent LPs 2.000 W
• Power: Fluorescent tube LPs, max 480W CFL 8 (13 x 36W)
• Detection angle: 360°
• Detection range: micro e normal motion radius about 3÷4 m
• Detection range: normal motion radius about 6÷8 m
• Lighting limit adjustment: approx. 30–200 Lux
• Adjustment of deactivation delay: 5 sec–12 min
• Type of installation: semi recess mounting in round box or in false ceiling
• Protection degree: IP20
• Dimensions (DxW): Ø 97 x 85 mm
Brightness self-learning
The presence detector in AUTO mode, memorises the
brightness level to which it is asked to turn on the lights
When this level is exceeded, the presence detector automatically
switches off the lights, avoiding unnecessary waste
IR remote control (option)
Battery operated, the controller has two channels to allow to control
two detectors 1SP SP016 selecting three types of operation:
• AUTO: the detector is activated automatically with movements
based on time and lux settings
• ON: light always switched ON
• OFF: light always switched OFF
detection of micro and
normal movements
detection of normal
movements
code
description
1SP SP016
Indoor infrared presence detector for semi recess mounting in ceiling
1SP RCSP01
Infrared remote control for controlling detector 1SP SP016 (option)
WIRELESS DIGITAL CHRONOTHERMOSTAT 868,35 MHz
• Power supply 3V – 2x1.5V AA alkaline batteries - aprox. Lifetime 3 years
• ON / OFF operation with adjustable differential switch 0.2 – 0.7°C
• 2 temperatura levels + anti-freeze (excludable or adjustable)
• 3 preset programs (modifiable)
• Minimum programming time: 30 minutes
• MASTER function
• SUMMER / WINTER option
• Possibility of correction of the detected room temperature (OFFSET).
• Interruption button for cleaning operations
• Range: 30 - 130m
• Dimensions: (LxWxH) 120 x 21 x 80 mm
code
description
1TX CRTX05
Wireless weekly digital chronothermostat with 868.35 MHz RF output
WIRELESS DIGITAL THERMOSTAT 868,35 MHz
• Power supply 3V – 2x1.5V AA alkaline batteries - approx. lifetime 3 years
• ON / OFF operation with adjustable differential switch 0.2 – 0.7°C
• 2 temperatura levels + anti-freeze (excludable or adjustable)
• SUMMER / WINTER option
• Operational safety is ensured by a double transmission of information to the receiver
• Possibility of correction of the detected room temperature (OFFSET).
• Indication of ON status and battery charge
• Range: 30 - 130m
• Dimensions (LxWxH): 84 x 23 x 84 mm
code
description
1TX TETX04
Wireless daily digital thermostat with 868.35 MHz RF output
ELECTRONIC VALVE for water radiators with 868,35 MHz RF transceiver
• Power supply 3V – 2x1.5V type C alkaline batteries - approx. lifetime 3 years
• ON / OFF operation
• RF signal level indicator
• Fault and/or battery charge indicator
• Valve opening/closing condition indicator
• Threaded coupling for radiators with adaptation
ring nut for the main thermostatic valves
• Dimensions: (LxWxH): 62 x 70 x 97 mm
code
description
1TX VTRX02
Electronic valve for water radiators with 868,35 MHz RF transceiver
KITS and ACCESSORIES
1PA BTCRTX01
code
1PA BTTETX01
1TX CRTX05RX01
1TX TETX04RX01
description
1TX CRTX05RX01
Kit including 1 chronothermostat CRTX05 + 1 wall-mounted 1 zone radio receiver RX01/P
1TX CRTX05RX02
Kit including 2 chronothermostats CRTX05 + 1 wall-mounted 2 zones radio receiver RX02/P
1TX TETX04RX01
Kit including 1 thermostat TETX04 + 1 wall-mounted 1 zone radio receiver RX01/P
1TX TETX04RX02
Kit including 2 thermostats TETX04 + 1 wall-mounted 2 zones radio receiver RX02/P
1PA BTCRTX01
Table base for chronothermostat CRTX05, for positioning the device where required
1PA BTTETX01
Table base for thermostat TETX04, for positioning the device where required
Perry Electric Srl
Via Milanese, 11
22070 Veniano - Como (Italy)
Tel: +39-031 8944.1 - Fax: +39-031 931848
www.perry.it - export@perry.it
Download