Produktbl_UV_Black.qxp:Musterseiten_CT_neuUnternehm
q
14.04.2008
Elastomer Coatings
CONTI-AIR®
UV BLACK
Print to Perfection. Mit dem Drucktuch
für hochwertigen Bogen-, Rollenoffsetund Metalldruck mit UV-Farben.
Print to Perfection. With the UV blanket
for high-quality sheet-fed, web offset
and metal decorating.
16:19 Uhr
Seite 1
Produktbl_UV_Black.qxp:Musterseiten_CT_neuUnternehm
14.04.2008
16:19 Uhr
Seite 2
Print to
perfection.
WT 6475/13 04.08 (BE) Printed with ContiTech printing blankets on non-chlorine bleached paper
CONTI-AIR® UV BLACK
q Ausgezeichnete Punktschärfe
q Geringe Tonwertzunahme
q Hohe Quellbeständigkeit gegen UV-Farben
und UV-Waschmittel dank eines speziellen
Deckplattengummis
q Ausschließlich für reinen UV-Druck geeignet
q Extremely sharp dot reproduction
q Low dot gain
q High resistance to UV inks and cleaning
agents thanks to special surface rubber
q Only suitable for pure UV printing
q Technische Daten
q Technical data
Deckplatte
Printing surface
Farbe: schwarz
Color: black
Oberfläche: feinstgeschliffen
Surface: microground
Rautiefe RZ (DIN 4768): 6,5 µm
Roughness RZ (DIN 4768): 6.5 µm
Rautiefe RA (DIN 4768): 0,63 µm
Roughness RA (DIN 4768): 0.63 µm
Härte Deckgummi (DIN 53505): 62° Shore A
Surface hardness (DIN 53505): 62° Shore A
Härte gesamtes Drucktuch: 82° Shore A
Total blanket hardness: 82° Shore A
Kompressibilität
Compressibility
Bei 1.350 KPa: 0,187 mm ± 0,027 mm
At 1,350 KPa: 0.187 mm ± 0.027 mm
Gewebelagen
Fabric Layers
3 kalibrierte Gewebelagen
3 precision calendered fabric plies
Dehnung (DIN 16621 & 53354)
Elongation (DIN 16621 & 53354)
0,75 % ± 0,15 % bei 500 N/5 cm
0.75 % ± 0.15 % at 500 N/5 cm
Nenndicken (ISO 12636)
Nominal thickness (ISO 12636)
1,69 / 1,95 mm
1.69 / 1.95 mm
True Rolling (Papierförderverhalten)
True Rolling (Paper feed characteristics)
= neutral
= neutral
ContiTech Elastomer-Beschichtungen GmbH · Market Segment Printing Blankets
D-37154 Northeim · Phone: +49 5551-702-149 · E-Mail: service@contiair.com · www.contiair.com
The content of this publication is provided for information only and without responsibility. ContiTech Elastomer-Beschichtungen GmbH’s obligations and responsibilities regarding its products are governed solely by the agreements under which they are sold. Unless otherwise agreed in writing, the information contained herein does not become part of these agreements. This publication does not contain any guarantee or agreed quality of ContiTech ElastomerBeschichtungen GmbH’s products or any warranty of merchantability, fitness for a particular purpose and non-infringement. ContiTech Elastomer-Beschichtungen GmbH may make changes in the products or services described at
any time without notice. This publication is provided on an “as is” basis. To the extent permitted by law, ContiTech Elastomer-Beschichtungen GmbH makes no warranty, express or implied, and assumes no liability in connection with
the use of the information contained in this publication. ContiTech Elastomer-Beschichtungen GmbH is not liable for any direct, indirect, incidental, consequential or punitive damages arising out of the use of this publication. Information contained herein is not intended to announce product availability anywhere in the world. Copyright © 2008 ContiTech Elastomer-Beschichtungen GmbH. All rights reserved.