TXOI(i) 250V(1).doc
21.06.2006 14:46
Page 1 of 2
Shipline TXOI(i) 250V Instrumentation cable
Flame retardant halogen-free
instrumentation cable. Braided.
Individual pair shielded.
TXOI(I) 250V
HFXLPE/TCWB/PO
Operating temperature
Operating Voltage
: 90°C
: 250V
Standards applied
Application
Armoured cable for fixed installation in ships where cable
protection is required. Suitable for use on instrumentation and
communication systems. Can be installed and operated both
indoors and outdoors.
IEC 60092-376
IEC 60228 class 2
IEC 60092-351
IEC 60092-359
IEC 60332-1
IEC 60332-3-22
IEC 600754-1,2
IEC 61034-1,2
- Design
- Conductor
- Insulation
- Sheath
- Flame Retardant
- Flame Retardant
- Halogen Free
- Low Smoke
Construction
Code
Letter
Conductor
Insulation
Annealed stranded circular copper, IEC 60228 class 2
T
Pair / Triple /
Quad twisting
Lay up /
Shielding
Inner covering
Armour/screen
Tape over
armour/screen
Outer sheath
Marking text
Outer sheath
colour
X
O
I
Crosslinked Polyethylene, IEC 60092-351 (HFXLPE)
Numbered white cores are twisted together and wrapped with polyester tape.
Pairs/Quads are laid up and individually shielded by aluminium backed polyester
tape with tinned copper drain wire. Each pair/quad is wrapped with polyester tape to
prevent electrical contact with adjacent pairs/quads. Pairs/quads are identified by
numbers printed on the insulated cores.
Individually shielded pairs are laid up in concentric layers and wrapped with a PETP
tape.
No inner covering. Two tapes substitutes the extruded covering. All tapes are
halogen-free.
Tinned copper wire braid
Additional tape may be applied
Flame retardant halogen-free thermoplastic compound, SHF1
E.g. "meter" "year" DRAKA NORSK KABEL TXOI(i) 250V 2 PAIR 0,75 mm2 IEC
60092-376 IEC 60332-3-22 ShipLine
Grey
www.drakaMOG.com
Subject to change without prior notice
TXOI(i) 250V(1).doc
21.06.2006 14:46
Page 2 of 2
Shipline TXOI(i) 250V Instrumentation cable
Core identification instrumentation cables
The pairs have the following number identification according to IEC 60092-376
Pair no.1
Pair no. 2
Pair no. 3
Pair no. 4
Pair no. 5
Core no.
1-2
3-4
5-6
7-8
etc - etc
Range and dimensions
No of
Number of
cores in
elements
element
2
4
7
2
2
2
Cross
section
core,
mm²
0.75
0.75
0.75
Conductor
Diameter,
mm
Insulation
Thickness,
mm
1.1
1.1
1.1
0.5
0.5
0.5
Weight of
Diameter
Thickness
Diameter
Cable
Braid Wire, Outer
outer
Approx.
mm
Sheath, mm sheath, mm
(Kg/Km)
0.2
1.1
10.5 ± 0.8 150
0.2
1.2
12.5 ± 0.8 225
0.3
1.3
15.5 ± 0.8 380
Copper
content
Approx.
(kg/km)
81
124
226
Electrical values instrumentation cables
Type
Capacitance, approx. (nF/km) Inductance, approx, (mH/km) Resistance at 20°C, max. (Ohm/km)
Shielded pair 0,75 mm²
70
0.64
26.0
Ordering information
Part number
832482
832484
832486
Description
TXOI(I) 250V 2PAIR 0.75mm²
TXOI(I) 250V 4PAIR 0.75mm²
TXOI(I) 250V 7PAIR 0.75mm²
Sheath Colour
GREY
GREY
GREY
EAN No. DNK
7021528324822
7021528324846
7021528324860
EL No.
-
Installation recommendations
Minimum Bending Radius during
Installation
8xD
Minimum Bending Radius
Fixed Installed
6xD
Maximum Tensile Load During
Installation
50 N /mm²
www.drakaMOG.com
Subject to change without prior notice
Minimum Installation
Temperature
-10°C