Recessed Downlighting
Lytecaster
Lightolier
®
a Genlyte company
631 Airport Road
Fall River, MA 02720
Phone (508) 679-8131
Fax (508) 674-4710
www.lightolier.com
3015 Rue Louis Amos
Lachine (Quebec) H8T 1C4
Phone (514) 636-0670
www.canlyte.com
© 2007 Genlyte Group LLC.
All rights reserved. Certain
products illustrated in this
catalog may be protected
by applicable patents and
patents pending. Lightolier
will aggressively defend all
of its intellectual property.
We reserve the right to
change details of design,
materials and finishes.
A.I.A. Division 16
Brochure LOL7023
Some luminaires use fluorescent
or high intensity discharge (HID)
lamps that contain small amounts of
mercury. Such lamps are labeled
“Contains Mercury” and/or with the
symbol “Hg”. Lamps that contain
mercury must be disposed of in
accordance with local requirements.
Information regarding lamp recycling
and disposal can be found at
www.lamprecycle.org.
Printed in the U.S.A.
Lytecaster
A complete system of integrated, high performance downlights
for residential and light commercial applications.
Lightolier’s Lytecaster downlights were designed to bring
out the inherent value of any space. Whether accentuating
artwork or promoting products, outlining aisles or washing
walls, or unobtrusively underscoring the architecture of a
space to lend it a distinctive ambiance, the Lytecaster line
of fixtures may be seamlessly blended with any décor.
Versatility is the secret behind Lytecaster’s adaptability.
With a selection of over 2,500 downlighting options,
Lytecaster fixtures not only complement any stylistic theme,
but also integrate effectively into decorative, track, and
indirect lighting schemes. Easily installed inconspicuously
in the ceiling, this flexible downlighting system illuminates
the home, the office, and the storefront with unwavering
performance.
table of contents
Through Lytecaster’s innovative selection, superior
performance, and long-lasting quality, innumerable lighting
The Lytecaster System
>
2
Sustainable Energy
>
10
Lytecaster Products
>
12
LytePoints Products
>
96
effects can be created to enhance the character
of the space.
L y t e c a s t e r
1
LY T E C A S T E R
A system of performance downlights for residential
and light commercial applications.
Lytecaster offers an extremely
Before Lytecaster, choices
wide and useful range of high
in downlights were limited to
performance downlights,
commercially-based products
Lytecaster provides over 1000
that were over-designed for most
lighting options in all for residential
homes or poor performing “white
and light commercial applications.
cans.” The scenario changed when
Within a single integrated system,
Lytecaster can provide general and
ambient lighting, wall washing,
accent lighting and task lighting.
Carefully designed to complement
any decor, Lytecaster downlights
can be combined with track,
decorative lighting and controls
to achieve a totally integrated
lighting design.
Lightolier developed Lytecaster.
The innovation of a separate
Frame-In Kit and Reflector Trim
system not only provided high
quality downlighting, it also
permitted different price and
performance levels to meet a
wide range of budgets. Whether
high performance or economical
units, all Lytecaster reflectors
utilize the same basic Frame-In
Lytecaster’s precise, optically
designed reflectors provide
superior glare control and light
output, allowing the use of
fewer fixtures compared to other
residential downlights. Lytecaster
downlights are also designed to
be easily installed, with a host of
The Lytecaster System
features that allow fast, consistent
installations every time. The
standard in the industry for over
40 years, Lytecaster was one of
the first products to provide the
magic of recessed lighting to the
residential market.
2
Kits. This “designed-in” flexibility
allows Lytecaster to provide quality,
versatile downlighting at a very
affordable price.
Contents
Quick Reference Compatibility Guide
3 3/4" Compact Fluorescent
3 3/4" Incandescent
3 3/4" Low Voltage
5" Compact Fluorescent
5" Incandescent
5" Low Voltage
6 3/4" Compact Fluorescent
6 3/4" Incandescent
6 3/4" Low Voltage
6 3/4" High Intensity Discharge
FireLine™ Fire Rated Enclosure
Lytegems
Photometrics
Accessories
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Page
12
20
22
26
28
36
46
50
68
82
84
86
88
90
92
L y t e c a s t e r
3
Choosing the Lytecaster System
Choosing the Lytecaster System
4
How Lytecaster Works
Lytecaster downlights meet the need for efficient and well-controlled lighting in residential
and light commercial applications. They offer
the broadest choice in fixture appearance and
performance at a moderate price.
an especially wide choice of coordinated
aperture finishes from basic residential to
commercial projects.
Lytegems attach to selected Reflector
Trims. They create expressive downlighting
by combining functional illumination with
Lytecaster downlights consist of Frame-In Kits decorative design.
and Reflector Trims.
Designing with Downlights
The Frame-In Kit provides mounting and
This catalog is organized to make downlight
electrical hardware. Each kit is designed for a selection easy. First, review the lighting
specific light source and installation condition. effects and light source options on pages
6-9. Some useful application guidelines
Reflector Trims deliver the lighting effects:
appear on pages 18-19.
general lighting, wall washing, and accent
lighting. They are interchangeable and offer
Select Frame-In Kits according to the light
source desired (incandescent, low voltage,
compact fluorescent, HID) and the expected
installation conditions (new construction,
remodel, etc.); see page 16. Frame-In Kits
are available in several sizes to accommodate
the scale of the space and the required
lighting intensity.
Select Reflector Trims and Lytegems
according to the lighting effects desired,
individual fixture performance, and
appearance. Use pages 6-9. Consult the
General, Wall Washing, and Accent sections
for ordering details, finish options, and
correct lamping.
L y t e c a s t e r
5
Choosing the Lytecaster System Light Sources
Choosing the Lytecaster System Light Sources
Incandescent
Compact Fluorescent
Incandescent lamps are the sources of choice if
familiar color and easy dimming are priorities. Color
ranges from the warm, friendly tones of conventional
incandescent to the cool and crisp effect of tungsten
halogen. Reflectorized lamp types, such as PAR and
BR lamps, allow for controlled light distribution, lending themselves well to concentrated downlighting,
wall washing and accent lighting. Most reflectorized lamps also feature longer lives than “A” lamps,
making them more suitable for difficult to access
locations. “A” lamps, the least costly of incandescent sources, produce smooth, soft-edged beams
that are ideal for general lighting. Their short profile
assists in creating glare-free downlighting.
Compact fluorescent downlights are truly
energy smart. They consume one-half
to one-third the power of comparable
incandescent downlights and last ten
times longer. Many products also carry
the Energy Star label or are qualified for
California’s Title 24 legislation. Today’s
compact fluorescent colors can either
correspond to warm incandescent
sources, ideal for most residential applications, or match cooler commercial
fluorescent lighting, good where generous daylight is present. A neutral tone is
popular for stores and other consumeroriented spaces. In all cases, the “color
rendering” of compact fluorescents is
very good. In well designed downlights
the effect is often indistinguishable
from incandescents. In addition, ballast
technology has improved and now offers
“rapid start’ and “instant-on” technology
minimizing or eliminating flickering when
started. Although “self-ballasted” lamps
are available (and often are promoted for
retrofitting), for best output efficiency and
glare control, use dedicated downlights
with separate ballasts designed specifically for compact fluorescent lamps.
Low Voltage
Low-voltage lamps are actually incandescent-type sources and
offer some of the same choices in color tone. They are readily
dimmable, provided that special low-voltage equipment is used.
Low voltage MR and PAR lamps offer the best control over
beam distribution, making them particularly useful for dramatic,
high-impact accent lighting. Their tight beams are especially well
suited for highlighting small objects and details and, due to their
small size, where source identification needs to be minimized.
Low-voltage lamps sometimes produce uneven beam patterns.
Where this effect is not desired, lenses should be used to
smooth out or control the beam.
6
HID
High Intensity Discharge (HID) metal halide lamps are high
output, long-life, highly energy efficient light sources suited
to commercial applications. They are ideal choices where
energy conservation and low maintenance cost are prime
considerations. Metal halide is the HID source of choice for
interior applications due to its relatively good color rendering
capability (not as good as compact fluorescent, however).
Most HID lamps produce so much light that they’re best
used in ceilings of at least 12' (in lower areas, use compact
fluorescents). For high ceilings (20' and higher) consider
metal halide PAR lamps, which have tremendous punch. Lowwattage HID lamps, such as those used in downlights, are not
presently dimmable.
L y t e c a s t e r
7
Choosing the Lytecaster System Lighting Effects
Choosing the Lytecaster System Lighting Effects
Lighting Effects
Wall Washing and Grazing
Lytecaster downlights perform four basic lighting functions: provide
general/ambient room illumination; highlight walls by “washing”
or “grazing”; accent specific objects or architectural features
or illuminate areas where tasks are performed; provide general
illumination within special environments (showers, spas, closets,
etc.). Effective downlighting generally combines these elements in
an unobtrusive array of fixtures.
Wall washing provides a smooth, even field of light over the length
and width of a wall; grazing highlights wall texture. To achieve an
even gradient of brightness through wall washing, place wall wash
fixtures 24"-36" from the wall and at equal distance apart. This
technique enhances the sense of spaciousness and minimizes wall
texture. Wall wash fixtures incorporate specific optics that distribute
light evenly across and along the vertical surface and counteract
“scallops” at the top of the wall. Grazing enhances the texture of
walls and is generally accomplished with ordinary downlights (the
smaller the better) with concentrated beams of light. Closely spaced
fixtures are located near to the wall, and the light “grazes” down
along its surface to highlight texture. Grazing also works for shiny
surfaces, such as marble or mirror.
General/Ambient Lighting
General or ambient lighting provides overall visibility and defines
a space, allowing safe and comfortable movement. Good ambient
lighting is evenly distributed (no hot spots) and free from glare.
Fixtures are spaced in a quiet pattern.
Open downlights are most often used to achieve this. Aperture size
and finish depend on the light source and the design and scale
of the space. Downlights with “A” lamps or compact fluorescent
deliver soft-edged wide illumination from a well hidden source. For
higher ceilings, use concentrated beams; for sloped ceilings use
special Reflector Trims.
Accent/Task
Accent lighting draws the eye and provides dramatic interest by
directing concentrated light and thus extra attention to selected
objects and surfaces. Accent lighting should be selective: if too
many objects or areas are emphasized, little stands out. Accent
lighting is typically carried out with adjustable downlights whose
beams can be aimed at focal objects. “Reflectorized” lamps (PAR,
BR, R, or MR) deliver the concentrated beams required. Arrange
them so they blend in with the pattern of general and wall lighting.
Wet Location/
Special Environment
These products are usually enclosed and
provide proper illumination in showers,
closets, food preparation areas, or to
eliminate exposure of the light source.
Accent lighting draws the eye and provides dramatic interest by
directing concentrated light and thus extra attention to selected
objects and surfaces. Accent lighting should be selective: if too
many objects or areas are
emphasized, little stands out.
Accent lighting is typically carried
out with adjustable downlights
whose beams can be aimed at
focal objects. “Reflectorized”
lamps (PAR, R, or MR) deliver
the concentrated beams
required. Arrange them so they
blend in with the pattern of
general and wall lighting.
Lytecaster offers an extremely wide
range of cost effective high performance downlights, providing over 1000
lighting options, in all, for residential
and light commercial applications.
Lytecaster fixtures (which incorporate
unitized optics and full reflectors) are
designed to be easily installed, with a
host of features that allow fast, consistent installations every time.
8
L y t e c a s t e r
9
Sustainable Energy
Sustainable Energy
Rolled metal
prevents sharp
edges
Sustainable Energy
“U” shaped bars
allow two point
installation
Sustainable Excellence
It is clear that the future holds tremendous challenges in the areas
of energy consumption and the need for conservation. Lytecaster is
committed to providing products that will help meet these ever changing
needs by offering lighting that provides unsurpassed quality, exceptional
performance and the latest technology for energy efficiency.
Lytecaster Energy Star
In 2006, Lytecaster introduced a full line of Energy Star rated downlights. The
products met the strict requirements of both Energy Star and California’s Title
24 legislation. Available in a residential and commercial version with over 40
trim options, these products are designed to provide the best possible energy
efficient lighting for every application.
Alignment
notches allow
easy alignment.
It’s all about ,
the Contractor…
Designed with the Contractor in mind, Lytecaster offers
new UniFRAME frame-in kits that are quick and easy to
install. UniFRAME’s unique “U” design is tailor made for
commercial installations. The U-shape mounting bars
add support to the frame and allow for two installation
points. Our exclusive Grid-Lock™ tool-free installation
adjusts to any size grid ceiling and locks panel in place
for cleanest installations. These frames accept both
horizontal and vertical optics and allow the use of most
existing Lytecaster trims.
UniFrame
In 2007, Lytecaster introduced it’s new line of UniFrame energy efficient
fluorescent products. Designed for performance, these products will set the
standard for quality downlighting with unsurpassed flexibility. With lamping up
to 42 watts and over 100 trim options from basic residential to commercial
applications, this new line will be one of the broadest lines of energy efficient
products available.
It’s all about , the
Lighting Professional…
3 3/4" Non-IC Frame-In Kits
6 3/4" Non-IC Frame-In Kits
5" Non-IC Frame-In Kits
Vertical Reflectors
ENERGY STAR
T24
2005
1001WH
Open Downlight
These trims are offered in 3 3/4", 5" and 6 3/4" aperture sizes with a Matte
White, Specular Clear or Clear Diffuse finish. Specular Clear finish offers
superior performance and provides an Iridescent Free coating to eliminate
rainbowing. Clear Diffuse is a semi-specular finish that diffuses light and
provides a soft, even illumination that minimizes the mirror image typically
found on specular finishes. Matte White finish blends into ceiling for minimal
impact on ceiling appearance.
Horizontal trims provide superior cut-off and shielding and use the standard
frame-in kit. These open downlights offer a 60 degree cut off with up to 42W
Triple Tube lamping. Trims are offered in 5" and 6 3/4" aperture sizes with a
Specular Clear, Clear Diffuse or Matte White finish.
Wall washers provide a smooth, even illumination over the length and height
of a wall surface and roomside downlighting. The single wall washers are
available in 3 3/4", 5", and 6 3/4"” aperture sizes and the double wall
washers are offered in 5" and 6 3/4" aperture sizes. All trims are available in
Specular Clear, Clear Diffuse or Matte White finishes.
Wet Location
1001CLF
Horizontal Reflectors
Open Downlight
Wall Washer
1001CDDW
Clear lens provides optimal lumen output and effective light distribution.
Fresnel Lens provides improved shielding of the lamp source while effectively
distributing light. Opal lens provides complete shielding of the lamp source
and offers beautiful aesthetics. All three trims are offered in the 3 3/4"
aperture sizes.
1001HCD
Wall Washer
1001HCLSW
Single wall washers provide a uniform distribution of light together with room
side downlighting for demanding commercial applications. Trims are available
in 5" and 6 3/4" aperture sizes in Specular Clear, Clear Diffuse or Matte
White finishes.
Shielded Downlight
1001HACB
New floating crossblade adds visual interest and redefines a classic look. The
horizontal lamping provides additional shielding for exceptional visual comfort
without sacrificing performance. Trims are available in 5" and 6 3/4" aperture
sizes with an Aluminum or Matte White finish.
Wet Location
1001HCDF
10
UniFRAME professional optics provide the ultimate in
performance and flexibility. All optics focus on a specific
trim / lamp for a performance combination while offering
multiple lamp options for increased flexibility.
Lensed horizontal trims provide superior shielding of the horizontal lamp
source while providing the increased flexibility of a shallow trim that fits in
2' x 8' construction. All trims are offered in the 5" and 6 3/4" aperture sizes
with Clear, Fresnel and Opal lens options.
L y t e c a s t e r
11
Lytecaster Quick Reference Compatibility Guide 3 3/4" Incandescent/Compact Fluorescent Series
Non Insulated Ceilings
Frame-In Kit
Reflector
2005†/2005WH
2005BNM
2006
2008†
2010†
2011
2012†
2013†
2013BK†
2013CD†
2013WH
2022/2022WH
2022LV
2025WH
2026WH
2027†
2027BNM
2027WH
2029BK†
2029CD†
2029CL†
2029GD†
2029WH
2045/2046/2046CD
2084CD/2084WH
2090
2090LV
2095/2096/2096CD
Insulated Ceiling
Non Insulated Ceiling
Standard
2002P1
Remodeler
2003R
Standard
2000P1
Low Voltage
2000LV
2000LVNT
Low Voltage
Remodeler
2000LVR
Standard
2000IC
Air Seal
2000AIC
Standard
2004ICV
2000AICV
p. 22
X
X
p. 22
X
X
p. 23
X
X
p. 24
X
X
X
X
X
X
X
X
X
X
X
X
p. 25
X
X
X
X
X
X
X
X
X
X
X
p. 24
X
X
X
X
X
X
X
X
X
X
p. 25
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 26
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
2004ICV
2004ICV
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Frame-in Kit
1 Lt Comp.
Fluor.
2001F13U
1 Lt Comp.
Fluor.
2001F18U
p. 20
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 20
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
UniFrame
2001CL
2001CD
2001WH
2001CLSW
2001CDSW
2001WHSW
2001CLC
2001CLF
2001CLO
2001CDC
2001CDF
2001CDO
2001WHC
2001WHF
2001WHO
X
X
X
X
X
X
X
X
X
X
X
X
X
† = Add “NM” to Reflector for Natural Metal ™ Flange
Lytecaster Quick Reference Compatibility Guide 5" UniFrame Compact Fluorescent Series
UniFrame
1001CL
1001CD
1001WH
1001CLSW
1001CDSW
1001WHSW
1001CLDW
1001CDDW
1001WHDW
1001HCL
1001HCD
1001HWH
1001HCLSW
1001HCDSW
1001HWHSW
1001HCLC
1001HCLF
1001HCLO
1001HCDC
1001HCDF
1001HCDO
1001HWHC
1001HWHF
1001HWHO
1001HACB
1001HWHCB
Lytecaster Quick Reference Compatibility Guide 5" Incandescent/Compact Fluorescent Series
Non Insulated Ceiling
1 Lt. Comp. Fluor.
1001F13U
1001F18U
1001FR18U
1001F18UEM
1001F26U
1001FR26U
1001FD26MX1
1001FD26MX2
1001FD26M7U
1001FD26L1
1001FD26L2
1001F26UEM
p. 28
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 28
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 28
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 28
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 28
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 28
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 28
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 28
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 28
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 28
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Non Insulated Ceiling
Standard
1002P1
Reflector
1005†
1005NM
1005BNM
1005WH
1008†
1010†
1011
1012†
1013†
1013BK†
1013CD†
1013WH
1021
1022
1022WH
1024
1027†
1027BNM
1027BK†
1027CD†
1027WH
1029†
1029BK†
1029CD†
1029CL†
1029GD†
1029WH
1035
1035WH
1038†
1045
1046
1046CD
1048†
1052LV
1055LV
1055WHLV
1056LV
1062LV
1063LV
1064LV
1064CDLV
1071
1076
1076WH
1078
1081CD
1081WH
1082
1084CD
1084WH
1085
1088
1090
1095
1096
1096CD
1177LX
1178LX
p. 36
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Standard
1000P1
p. 36
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Remodeler
1003R
p. 36
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Insulated Ceiling
Low Voltage
1000LV
1000LVNT
Remodeler
1000LVR
Standard
1000IC
p. 46-47
p. 40
X
X
X
X
X
X
p. 40
X
X
X
X
X
X
p. 40
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Air Seal
1000AICM
Air Seal
1004ICX
IC/Non-IC
1004IC
Shallow
IC/Non-IC
1004SIC
Remodeler
1004ICR
1004SICR
p. 32, 34
X
X
X
X
X
X
p. 44
X
X
X
X
X
X
p. 44
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Convertible
Low Voltage
1004ICV
p. 47
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 47
Energy Star
1 Lt. Comp. Fluor.
1004F Series
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Low Voltage
1000ICV
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For additional trim options please consult specification sheet.
12
L y t e c a s t e r
13
Lytecaster Quick Reference Compatibility Guide 6 3/4" Compact Fluorescent Series
1 Light Compact Fluorescent
Non Insulated Ceiling
Frame-In Kit
UniFrame
1101CL
1101CD
1101WH
1101CLSW
1101CDSW
1101WHSW
1101CLDW
1101CDDW
1101WHDW
1101HCL
1101HCD
1101HWH
1101HCLSW
1101HCDSW
1101HWHSW
1101HCLC
1101HCLF
1101HCLO
1101HCDC
1101HCDF
1101HCDO
1101HWHC
1101HWHF
1101HWHO
1101HACB
1101HWHCB
1 Light Compact Fluorescent
Insulated Ceiling
UniFrame
Standard
1101F18U
1101FR18U
UniFrame
Standard /
Emergency
1101F2642U
1101FR2642U
1101F2642UEM
UniFrame
Advance Dimming
1101FD2642MX1
1101FD2642MX2
1101FD2642M7U
UniFrame
Lutron
Dimming
1101FD26L1
1101FD26L2
1101FD32L1
1101FD32L2
p. 50
p. 50
p. 50
p. 50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For additional trim options please consult specification sheet.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Frame-In Kit
Standard
1105† / 1105WH
1108† / 1110†
1112†
1113† / 1113WH
1113BK† / 1113CD†
1121 / 1124
1126
1128
1132
1134
1135 / 1135WH
1143
1144 / 1144CD
1145
1146 / 1146CD
1149 / 1150 / 1151
1170M1
1171
1176 / 1176WH
1177LX / 1178LX
1177SH
1178SH
1179M1 / 1179WH
1182
1185
1190
1195
1196 / 1196CD
B16 / B17 / B17WH
1105T / 1105TWH
1113TCL / 1113TGD
1126T / 1128T
1132T
1135T
1135TWH
1178T
1105HR
1113HR
1126HR
1146HR
1149HR
1151HR
Energy Star
1104F Series
Air Seal
1100AICMFT
2 Light Compact Fluorescent
Non Insulated Ceiling
Low Profile
1102T1
1102TH1
1102TH2
1102TH1R
Low Profile
1102T13U
1102T18U
1102T26U
Emergency
Low Profile
1102T13UEM
1102T18UEM
1102T26UEM
Emergency
Low Profile
1102TM1
1102TM2
p. 64
p. 64
p. 66
p. 64
p. 58
p. 54
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Non Insulated Ceiling
Energy Star
Standard/
Emergency
1100FTUES
1100FTUESEM
p. 60, 62
X
X
X
X
X
X
X
Lytecaster Quick Reference Compatibility Guide 6 3/4" Incandescent/High Intensity Discharge
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Frame-In Kit
Reflector
1105†/1105WH
1105BNM
1108†
1110†
1112†
1113†
1113BK†
1113WH
1113CD†
1113WH
1121
1122/1122WH
1124
1126
1127†
1127BK†
1127CD†
1127WH
1128
1129†
1129BK†
1129CL†
1129CD†
1129GD†
1129WH
1130CL/1130GD
1131 Series
1132
1133 Series
1134
1135/1135WH
1138†
1143/1144/1144CD
1145/1146/1146CD
1148†
1149
1150
1151/1151CD
1152
1154 Series†
1155/1155WH
1161/1161WH
1163
1164
1170M1
1171
1176/1176WH
1177LX
1177SH
1178LX
1178SH
1179M1/1179WH
1182
1184WH
1184CD
1185
1190
1195/1196/1196CD
B16
B17
B17WH
1738CL/1738GD
1105HR
1113HR
1126HR
1146HR
1149HR
1151HR
Insulated Ceiling
Convertible
HID
Standard
1102P1
Remodeler
1103R
Standard
1700P1
Standard
1100IC
Air Seal
1100AICM
Deep
Insulated
Plenum
1100DICM
Deep
Plenum Air
Seal
1100DAICM
Air Seal
1104ICX
IC/Non-IC
1104IC
IC/Non-IC
Remodeler
1104ICR
IC/Non-IC
Shallow
1104SIC
IC/Non-IC
Shallow
Remodeler
1104SICR
HID 1102HF
p. 68, 82
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 68, 82
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 72
p. 74, 83
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 74, 83
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 78
X
X
X
X
X
X
X
X
X
X
X
p. 78
X
X
X
X
X
X
X
X
X
X
X
p. 81
p. 81
p. 84
X
X
X
X
X
X
X
X
X
X
X
p. 74, 83
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 74, 83
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
p. 74, 83
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
† = Add “NM” to Reflector for Natural Metal ™ Flange
14
L y t e c a s t e r
15
Frame-In Kits
Lytening Convertible Insulated/Non-Insulated Ceilings
Ceiling Type
Application
New Construction
Remodeling
Lytecaster provides a wide range of
frame in kits for new construction.
Designed with the contractor in
mind, Lytecaster offers a multitude
of frames with user friendly, time
saving features.
Whether adding task lighting to
a work area or enhancing your
living space, Lytecaster offers
several frame in kits to handle your
remodeling needs.
Lightweight, non-corrosive
aluminum housing with
smooth, safety-rolled edges
for easy handling.
AirSeal® ready design seals housing
for WA State Energy Code and National
Model Energy Code compliance.
Push-Lock™ Cable Clamps
instantly secure Romex—no
tools required.
Lytening Series
compatible with over 40
Lytecaster ® 1000 and 1100
series reflector trims.
Tool-free Knock-Outs lift
open easily by hand.
Insulated Ceiling
Lytecaster offers a wide range of advanced installation
features for every type of application. Lytecaster’s
unmatched selection, performance and flexibility make it
the first choice for the most demanding residential and
light commercial lighting applications.
...The World’s Best-Engineered Downlight
These frames provide recessed
lighting in the outer envelopes of
the building or in any area where
insulation will be installed.
Pivoting mounting
bars allows convenient
installation and wiring below
ceiling line.
Unitized Optics
Snap on socket cup assures accurate lamp position
every time.
Roto Clips
Easily install trims. Simply push and twist for a clean
architectural look.
Mounting Bars
Designed for wood joist or T-bar ceilings. Expand from
13" to 27" on the long or short side of the frame.
Spring “Squeeze-Clip” for
instant adjustment and
locking. No tools required.
Housing adjusts 2"
vertically within
mounting frame.
Available in 6 3/4", 5"
or 3 3/4" aperture.
Non-Insulated Ceiling
Provides greater flexibility and
lighting options in ceilings where
insulation is not present.
Introduced in 1997, Lyte ning has set the standard for
recessed downlights. Imagine the potential of a housing
so unique it will revolutionize downlight installations.
An innovation that eliminates the confined workspaces,
tool juggling and alignment problems your customers
face every day. Imagine a housing so easy to install, it
can be mounted and wired from below the ceiling line,
then pivoted into position between the joists. Well, stop
imagining and get ready to be struck by Lyte ning – the
revolutionary IC/Non-IC convertible recessed housing
from Lightolier.
Mounting
Designed with the installer in mind, Lytening can be installed in half the time of other frames.
Junction Box
Easy access from both sides, thermally protected, UL
listed for branch circuit wiring.
Lytening’s pivoting
mounting bars allow
convenient installation and wiring
below the ceiling
line.
AirSeal®
Pre-positioned screws or
nails for quick installation
in wood, steel or composite
construction.
Locator tabs position bar ends
accurately on the joist.
Integral T-bar tabs allow for
quick installation in suspended
grid ceilings.
Whether meeting the demands of
local energy codes or providing the
most energy efficient spaces,
AirSealed products control the loss
of conditioned air into the ceiling.
Installing
With tool free features and multiple configurations, Lytening installs with ease.
Available with standard wiring nuts or
quick connectors on
select models.
Tool free Knock-outs lift easily
by hand while the Push-Lock™
Cable Clamps instantly secure
the Romex.
Spring “Squeeze-Clip” offers
instant horizontal adjustment .
Unique Installations
Integral T-bar tabs allow for
quick installation in suspended
grid ceilings.
Lytecaster also offers several Frame-In kits for unique types of installations.
Finishing
16
Shallow
Deep
Designed to fit in 2x6 construction or less, our shallow
frames are perfect for tight spaces or obstructed
ceilings.
Our Deep Frames provide the greatest flexibility by
offering exceptional visual comfort and the greatest
choice of trims and lamping options.
AirSeal® compatible out of the box
for the Washington
State and National
Model Energy Code.
No special kits
required.
Lytening now
available with
Energy Star rated
ballasts in 5" and
6 3/4" apertures.
Lytening’s unitized optics and
push-up reflector trim eliminates light leaks and ensures
consistent and exceptional
performance.
ENERGY STAR
L y t e c a s t e r
17
Lytecaster Performance
With the Lytecaster System, you get optimum lighting
performance and the freedom to choose between a wide
variety of options. From high-end residential and light
commercial projects to cost-effective lighting projects,
Lytecaster has the right solution for your lighting needs.
To assist you with your lighting selection, Lytecaster
rates its products good, better, or best based on its
performance or features. Whatever your lighting needs,
Lytecaster has the answer.
Lytecaster Lighting Applications
Frame-In Kits
Good ✰
These frames provide you with a good choice of
standard downlighting trims, wattages and lamping
selections.
Better ✰✰
These frames are designed to give you a greater choice
by expanding the available trims to include adjustable
and slope ceiling products as well as increased lamping
options and wattages.
Lytecaster offers over 175 different trim combinations.
The following is a visual guide to assist you in
determining your lighting needs.
Specular Clear
Crisp, clean appearance and excellent light output.
Works well with “cool” colored interiors.
General Illumination
General illumination provides
overall illumination and defines
a space. Good general lighting
should be evenly distributed
across the space and provide a glare-free light
source. Available in 3 3/4", 5" and 6 3/4" sizes with
Incandescent, Low Voltage and Compact Fluorescent
light sources.
These include: Specular Reflectors, Aperture Cones
Baffles, Cross Blades, Pinholes, Baffles, Sloped Ceiling
Specular Gold
Rich luster and excellent light output. Works well with
“warm” colored interiors and woods.
Specular Black
Contemporary appearance. Ideal for accent lighting
since it appears “off” even when it’s “on.” The ultimate
low brightness downlight.
Accent Lighting
Best ✰✰✰
Our best frames are designed to allow the complete
compliment of downlighting trims, providing the highest
selection of wattages and providing the best optic
control and glare reduction.
Accent lighting provides dramatic
interest in a space by drawing
attention to selected objects and
surfaces such as artwork, place
settings and niche areas. It is typically achieved with
adjustable downlights whose beams can be carefully
aimed. Available in 3 3/4", 5" and 6 3/4" Incandescent
and Low Voltage light sources.
These include: Recessed Adjustables
Mini Swivels, Eyeballs, Elbows, Pinholes, Slots
Clear Diffuse
Soft, clean appearance provides soft slow and excellent
output and low maintenance. Excellent upgrade from
standard white baffle.
Natural Metal
Unique anodized flange enhances natural metal texture.
Excellent addition to rooms with stainless appliances
and accents.
Wall Washing
Trims
Good ✰
These trims feature a high gloss painted white finish
and wider “residential” trim flange. The single slot lamp
positioning provides good lamp shielding and provides
the user with standard lamp and wattage selections. It is
an excellent choice for budget applications.
Wall Washing provides a smooth,
even illumination over the length
and height of a wall surface. It is
an ideal way to enhance the sense
of spaciousness in a room. Wall washing can also be
used to highlight specific areas, selected materials, or
artwork. Available in 3 3/4", 5" and 6 3/4" sizes with
Incandescent and Compact Fluorescent light sources.
These include: Open Downlight, Step Baffle Eyelid,
Basic White Eyelid
Better ✰✰
These trims feature an anodized upper reflector and
a visually appealing narrow matte white flange finish.
Double slot lamp positioning provides better lamp
shielding and greater lamp and wattage selection. It also
provides 25% greater light output compared to the gloss
white finish.
Best ✰✰✰
Our best trims feature a highly specular specular finish.
Designed to have the deepest lamp positioning, our
specular trims provide the best glare control and lamp
shielding as well as the highest possible wattages.
Specular finishes also provide up to 40% greater light
output.
18
Wet Location
Wet Location provides overall
illumination in locations where the
light source may come into direct
contact with water or where a lens
is required (i.e., closets, food service, etc.). Available
in 3 3/4", 5" and 6 3/4" sizes with Incandescent, Low
Voltage and Compact Fluorescent light sources.
These include: Decorative Domes, Lensed Downlights,
Plastic Diffusers, Open Wet Location
Matte White
Offers an architectural, built-in appearance that softly
blends into the ceiling and smooths the light beam.
White Step Baffle
Provides excellent light output with low brightness.
White finish blends into the ceiling when the lights are
off and softens shadows when lights are on.
Black Step Baffle
Offers good light output with maximum glare control.
Black finish assures a comfortable, glare-free aperture
that keeps attention focused on the space.
Brushed Gold
Provides a soft aperture brightness. Prominent
appearance works well with traditional interiors and
“warms” the light.
Brushed Clear
Contemporary “etched” appearance provides a soft
aperture brightness. Matches popular hardware finish.
L y t e c a s t e r
19
3 3/4" UniFrame Compact Fluorescent Non-Insulated Ceilings
3 3/4" UniFrame Compact Fluorescent Non-Insulated Ceilings
Reference Data
Open Downlight
Frame-in Kits
Reflector
New Construction
Designed for new construction where insulation will not
be installed. Frame-In kit accommodates ceilings up to
1 1/2" thick. “Push In / Twist Out” stainless steel trim
clips hold reflector flush to ceiling.
Universal electronic ballast
120V - 277V UL Listed electronic ballast, end of lamp
life protection, class “P” thermally protected, class “A”
sound rating. Minimum starting temperature is 0°F.
2001F13U
13w Quad/Triple Tube GX24q-1 Base
2001F18U
18w Triple Tube GX24q-2 Base
Input Wattage
120v – 0.16amp max
277v – 0.07amp max
Input Wattage
120v – 0.23amp max
277v – 0.10amp max
Mounting - Grid Ceiling:
Tool free mounting in grid ceilings. Galvanized steel
interlocking slide bars adjust to 24 1/8" long accommodating 24" O.C. ceiling grid. Adjustable speed clamps for
positive attachment to grid ceiling systems.
Mounting - Wood Joist Ceilings:
Integral nailing tabs, alignment guides, fastener holes
and bendable strapping guides for wood joist installation. Galvanized steel interlocking slide bars adjust from
12 15/16" to 24 1/8" long to accommodate 16" and 24"
O.C. joist spacing, with or without strapping.
2001CL Specular Clear
2001CD Clear Diffuse
2001WH Matte White
Single Wall Wash
Application Data Single Unit Data 18W
2001CL
18W Triple
1200
47.6 %
1.4
Reflector
Lamp
Lamp Lumens
Efficiency
Spacing Criterion
3 15/16"
7 3/4"
12 15/16"
See specification sheet
15
10
7
6'
7'
8'
Multiple Units (18W) Footcandles on Wall
2001CLSW
18W Triple
1200
46.9 %
Distance
From
Ceiling
in Feet
1'
2'
3'
4'
5'
6'
7'
8'
9'
Multiple Units 18W
Spacing On
Center
Average Initial
Foot-Candles
Watts
Sq. Ft.
4'
5'
6'
60
41
27
2.06
1.43
0.92
24' x 24' x 8.5' Room
Workplane 2.5' Above Floor
80% / 50% / 20% Reflectances
2' from Wall-2' on Center
■ ------- 2' ------- ■
21
18
21
29
29
29
23
23
23
16
16
16
11
11
11
8
8
8
5
5
5
4
4
4
3
3
3
Multiple Units (18W) Footcandles on Wall
Distance
From
Ceiling
in Feet
1'
2'
3'
4'
5'
6'
7'
8'
9'
2' from Wall-3' on Center
■ ------- 3' ------- ■
16
12
16
20
19
20
15
16
15
11
11
11
8
8
8
6
6
6
4
4
4
3
3
3
2
2
2
2'
3'
3'
16 FC
15 FC
Opal Lensed Downlight
Fresnel Lensed Downlight
Clear Lensed Downlight
Reflector
Reflector
Reflector
2001CLO
2001CDO
2001WHO
2001CLF
2001CDF
2001WHF
Specular Clear
Clear Diffuse
Matte White
Reference Data
Reflector
Lamp
Lamp Lumens
Efficiency
Spacing Criterion
Application Data Single Unit Data 18W
2001CLF
18W Triple
1200
29.8 %
1.4
Height to
Lighted
Plane
Initial
Center Beam
Foot-Candles
Beam
Diameter
4'
5'
6'
10
6
4
6'
7'
8'
2001CLC
2001CDC
2001WHC
Specular Clear
Clear Diffuse
Matte White
Beam diameter is where foot-candles drop to
50% of maximum.
20
4'
5'
6'
Reference Data
2001F13U
2001F18U
Cut Out
Width
Length
Depth
Beam
Diameter
Beam diameter is where foot-candles drop to
50% of maximum.
Conversion Factor for Finishes:
CD = footcandle x .90
WH = footcandle x .70
2001CLSW Specular Clear
2001CDSW Clear Diffuse
2001WHSW Matte White
Initial
Center Beam
Foot-Candles
Conversion Factor for Finishes:
CD = footcandle x .90
WH = footcandle x .70
Reflector
Lamp
Lamp Lumens
Efficiency
Reflector
Height to
Lighted
Plane
Multiple Units 18W
Spacing On
Center
Average Initial
Foot-Candles
Watts
Sq. Ft.
4'
5'
6'
20
14
9
1.38
0.96
0.61
15 FC
Specular Clear
Clear Diffuse
Matte White
Conversion Factor for Efficiencies on Lenses:
Clear = efficiency x 1.03
Opal = efficiency x .88
24' x 24' x 8.5' Room
Workplane 2.5' Above Floor
80% / 50% / 20% Reflectances
L y t e c a s t e r
21
3 3/4" Incandescent Non-Insulated Ceilings
2002P1 ✰
Designed for new construction where insulation will not
be installed. This steel frame will accommodate ceilings
up to 1" thick. Steel mounting bars will extend from 13"
to 27". Integral wood joist nailing tabs, Integral cable
clamps for nonmetallic (Romex® ) or armored (BX® )
cable, UL listed for through wiring.
3 3/4" Incandescent Non-Insulated Ceilings
Deep Specular ✰✰✰
Step Baffle ✰✰
Performance PAR Recessed Adjustable
✰✰✰
Frame-In
Kit
Lamping
BT15
Frame-In
Kit
Lamping
A19 R20
PAR16 PAR20
2002P1
2003R
60W
60W
2002P1
2003R
40W
60W
75W
75W
75W
75W
50W
50W
Reflector
Reflector
2045
Specular Gold
2046
Specular Clear
2046CD Clear Diffuse
2005†
Matte Black
2005WH Matte White
2005BNM Natural Metal Flange/Baffle
Aperture Cone ✰✰
Pinhole ✰✰
Frame-In
Kit
Lamping
R20 PAR16 PAR 20
2000P1
75W
75W
50W
Matte Black Baffle
Natural Metal Flange/Baffle
Matte White Baffle
Specular Clear
Specular Gold
Specular Black
Clear Diffuse
Matte White
Aperture Cone ✰✰
Frame-In
Kit
Lamping
A19 R20
PAR16 PAR20
Frame-In
Kit
Lamping
A19 R20
PAR16 PAR20
2002P1
2003R
40W
60W
75W
75W
2002P1
2003R
40W
40W
45W
60W
75W
75W
50W
50W
Reflector
2003R ✰
Designed for existing construction where insulation will
not be installed. This steel frame will accommodate
ceilings up to 2" thick. Pre-installed mounting straps
secure flanged ring without tools and without damaging
plaster or gypsum ceilings. Junction box allows direct
“daisy-chain” wiring to other fixtures. Integral wood
joist nailing tabs, Integral cable clamps for nonmetallic
(Romex® ) cable.
Cut Out
Width
Length
Depth
2002P1
2003R
3 11/16"
3 15/16"
7 1/2"
4 3/8"
9 5/8"
N/A
see reflector trim
2008†
2010†
2012†
2013†
2013BK†
2013CD†
2013WH
50W
50W
Lensed Wet Location ✰✰✰
2011
Matte White Faceplate
Frame-In
Kit
Lamping
PAR20
2000P1
2002P1
2003R
50W
50W
50W
2002P1
2003R
50W**
50W**
Reflector
2090
Etch White
75W
50W
75W
Reflector
Lamping
A19 R20
PAR16 PAR20
Frame-In
Kit
Lamping
A19 R20
PAR16 PAR20
2000P1
40W
75W
2000P1
40W
75W
75W
50W
75W
2000P1
3 11/16"
7 1/2"
10 1/4"
5 1/2"
50W
Reflector
Brushed Gold
Brushed Clear
Specular Gold
Specular Clear
Specular Black
Clear Diffuse
Matte White
2005†
Matte Black
2005WH Matte White
2005BNM Natural Metal Flange/Baffle
Accepts Lytegems. See page 88.
Reflector
2084WH Gloss White
2084CD Clear Diffuse
**Requires outdoor rated PAR20 Sylvania lamp
2000P1 ✰
Performance PAR Non-IC is specifically designed for use
with Performance PAR Recessed Adjustable reflector
trims. Accommodates ceilings up to 1" thick. Integral
wood joist nailing tabs, Integral cable clamps for nonmetallic (Romex® ) or armored (BX® ) cable, UL listed for
through wiring, mounting bars lock to T-bar ceiling runners without accessories.
Cut Out
Width
Length
Depth
Frame-In
Kit
2008†
2010†
2012†
2013†
2013BK†
2013CD†
2013WH
Open Wet Location ✰
Lamping
PAR20
2000P1
Step Baffle ✰✰
Reflector
Frame-In
Kit
Lamping
PAR16PAR20 R20
50W
50W
Reflector
Brushed Gold
Brushed Clear
Specular Gold
Specular Clear
Specular Black
Clear Diffuse
Matte White
Frame-In
Kit
2022
Eyeball w/Black Baffle
2022WH Eyeball w/White Baffle
Reflector
2027†
2027BNM†
2027WH
2029CL†
2029GD†
2029BK†
2029CD†
2029WH
Step Baffle Eyeball ✰✰
Accepts Lytegems. See page 88.
Open & Pinhole
These miniature 3 3/4" downlights are an ideal solution
for tight spaces and hard-to-light areas such as low
ceilings, niches, bedrooms, corridors and similar environments. Use A or R lamps for soft-edged “fill” lighting
and PAR lamps for focal downlighting or wall grazing.
• Aperture Cones produce excellent light output and
come in a variety of finishes.
• Durable Step Baffle provides good light output with
increased glare control.
• Pinhole offers maximum glare control and an inconspicuous look.
Open Downlight Wall Washer ✰✰✰
60W
BT15
Lamping
BT15
2002P1
2003R
60W
60W
Reflector
2095
Specular Gold
2096
Specular Clear
2096CD Clear Diffuse
22
Distance from Ceiling
Frame-In
Kit
1'
2'
3'
4'
5'
6'
7'
8'
9'
Footcandles with Units 18 Inches from Wall
18"
9
20
16
11
8
5
4
3
2
7
20
16
11
8
5
4
3
2
2'
9
20
16
11
8
5
4
3
2
8
15
12
9
6
4
3
2
2
4
15
12
9
6
4
3
2
2
†Add NM to catalog number for Natural Metal flange.
8
15
12
9
6
4
3
2
2
The Pinhole’s small aperture allows unobtrusive lighting in both residential and light commercial ­applications.
L y t e c a s t e r
23
3 3/4" Incandescent Insulated Ceilings
2000IC / 2000AIC ✰✰✰
Designed for new construction where insulation will be
in direct contact with the fixture. IC housings designed
to offer a full range of lighting performance in fully
insulated ceiling applications up to 1" thick. Installed
appearance of Deep IC precisely matches Lytecaster
Non-IC Frame-In Kits. Fully gasketed AirSeal IC housings minimize air leakage for compliance with MEC
and WSEC. UL listed for through wiring, integral cable
clamps for nonmetallic (Romex® ) cable.
2000IC
2000AIC
Standard
AirSeal
Cut Out
3 11/16"
3 11/16"
Width
7 1/2"
7 1/2"
Length
10 1/4"
10 1/4"
Depth
5 1/2"
5 1/2"
Note: L amp Position is 1 1/8" lower than in Standard
Non-IC FIK.
3 3/4" Low Voltage Non-Insulated Ceilings
Aperture Cone ✰✰
Step Baffle ✰✰
Aperture Cone ✰✰
MR16 Eyeball ✰✰
Frame-In
Kit
Lamping
R20
PAR16 PAR20
Frame-In
Kit
Lamping
R20
PAR16 PAR20
Frame-In
Kit
Lamping
MR16
Frame-In
Kit
Lamping
MR16
2000IC
2000AIC
50W
50W
2000IC
2000AIC
50W
50W
2000LV
2000LVNT
2000LVR
20-50W
20-42W
20-50W
2000LV
2000LVNT
2000LVR
20-50W
20-42W
20-50W
45W
45W
50W
50W
Reflector
2008†
2010†
2012†
2013†
2013BK†
2013CD†
2013WH
Frame-In
Kit
Lamping
PAR16 PAR20
2000IC
2000AIC
45W
45W
50W
50W
Reflector
Matte Black Baffle
Matte White Baffle
Specular Clear
Specular Gold
Specular Black
Clear Diffuse
Matte White
Open Wet Location ✰
Frame-In
Kit
50W
50W
Reflector
Brushed Gold
Brushed Clear
Specular Gold
Specular Clear
Specular Black
Clear Diffuse
Matte White
Performance PAR Recessed Adjustable
✰✰
✰
2027†
2027WH
2029CL†
2029GD†
2029BK†
2029CD†
2029WH
45W
45W
Lamping
PAR20
2005†
Matte Black
2005WH Matte White
2005BNM Natural Metal Flange/Baffle
Step Baffle Eyeball ✰✰
Frame-In
Kit
Lamping
PAR16 PAR20 R20
2000IC
2000AIC
45W
45W
50W
50W
50W
50W
Reflector
2022 Eyeball w/Black Baffle
2022WH Eyeball w/White Baffle
Reflector
2008†
2010†
2012†
2013†
2013BK†
2013CD†
2013WH
2000LV / 2000LVNT ✰✰
Standard new construction MR16 Frame-In Kits for use
in ceilings up to 1" thick. Outboard-mounted magnetic
120V primary transformer ensures cool, quiet operation and easy access above the ceiling. NT Allows for
remotely mounted transformer. Ideal for general residential and light commercial low ­voltage application.
Integral wood joist nailing tabs, UL listed for through
wiring, Integral cable clamps for nonmetallic (Romex® )
or armored (BX® ) cable.
Reflector
Brushed Gold
Brushed Clear
Specular Gold
Specular Clear
Specular Black
Clear Diffuse
Matte White
2022LV
Matte White
Pinhole ✰✰
Slot Aperture ✰✰
Frame-In
Kit
Lamping
MR16
Frame-In
Kit
Lamping
MR16
2000LV
2000LVNT
2000LVR
20-50W
20-42W
20-50W
2000LV
2000LVNT
2000LVR
20-50W
20-42W
20-50W
Reflector
2011 Reflector
Pinhole w/Matte White Faceplate
Step Baffle ✰✰
2006 Slot Aperture w/Matte White Faceplate
Mini-Swivel Round ✰✰
8608
75W Max
8609
225 W Max
Lensed Wet Location ✰✰✰
Frame-In
Kit
Lamping
PAR20
2000IC 50W**
2000AIC 50W**
2000IC
2000AIC
50W
50W
Reflector
Reflector
2084WH Gloss White
2084CD Clear Diffuse
2090
Etch White
Frame-In
Kit
Lamping
MR16
Frame-In
Kit
Lamping
MR16
2000LV
2000LVNT
2000LVR
20-50W
20-42W
20-50W
2000LV
20-50W
2000LVNT 20-42W
2000LVR 37W
MR16 Remote Transformer
LVNT Frame-In Kits may be installed in new ceilings up
to 1" thick. Lightolier Remote Transformers are fused
and suitable for accessible recessed ­installation.
Reflector
Reflector
2005†
Matte Black
2005WH Matte White
2005BNM Natural Metal Flange/Baffle
2025WH White
Shower Trim ✰✰
Lensed Wet Location ✰✰✰
Frame-In
Kit
Lamping
MR16
Frame-In
Kit
Lamping
MR16
2000LV
2000LVNT
2000LVR
20-50W
20-42W
37W
2000LV / 2000LVNT
2000LVR
20-50W MR16
20-37W MR16
Reflector
24
2026WH Matte White Frosted Glass Diffuser
Accepts Lytegems. See page 88.
†Add NM to catalog number for Natural Metal flange.
Accepts Lytegems. See page 88.
2000LVNT
MR16 Remote
Transformer
3 11/16"
3 11/16"
7 1/2"
7 1/2"
11 1/8"
9 5/8"
see specification sheet
2000LV
**Requires outdoor rated PAR20 Sylvania lamp
Accent Lighting provides dramatic interest in a space
by drawing attention to selected objects and surfaces.
It is typically achieved with adjustable downlights whose
beams can be carefully aimed.
2000LVR ✰✰
Designed for existing construction where insulation will
not be installed. Non-IC remodeler for use in existing
ceiling up to 2" thick. Pre-installed mounting straps
secure flanged ring without tools and without damaging
plaster or gypsum ceilings. Integral cable clamps for
nonmetallic (Romex® ) or armored (BX® ) cable.
Cut Out
Width
Length
Depth
2000LVR
3 15/16"
2 3/4"
8 1/8"
Reflector
2090LV
Etch White
†Add NM to catalog number for Natural Metal flange.
L y t e c a s t e r
25
3 3/4" Low Voltage Insulated Ceilings
Aperture Cone ✰✰
2000AICV ✰✰✰
For use in new construction where fixture will be
in direct contact with thermal insulation. Magnetic
Transformer is mounted inside housing for easy access.
2000AICV features AirSeal® gasketing for compliance
with WSEC and MEC requirements. Integral wood joist
nailing tabs, Integral cable clamps for nonmetallic
(Romex® ) or armored (BX® ) cable, UL listed for through
wiring, mounting bars lock to T-bar ceiling runners without accessories, installs in ceilings up to 1" thick.
Lamping
MR16
Frame-In
Kit
Lamping
MR16
2004ICV
2000AICV
20-50W
35W
2004ICV
2000AICV
20-50W
35W
Reflector
2008†
2010†
2012†
2013†
2013BK†
2013CD†
2013WH
Reflector
Brushed Gold
Brushed Clear
Specular Gold
Specular Clear
Specular Black
Clear Diffuse
Matte White
Cut Out
Width
Length
Depth
2000AICV
3 11/16"
9"
15 1/2"
7 5/16"
2004ICV
3 15/16"
10 3/8"
12 1/4"
7 1/4"
2005†
Matte Black
2005WH Matte White
2005BNM Natural Metal Flange/Baffle
• 2000LV series features the smallest aperture size
(3 3/4") for the most dramatic applications and
widest selection of trim and finish options.
Illumination on Vertical Plane
Shutter blades set for maximum beam coverage.
Distance (D) 24" 36"
Aiming Angle (A)
30° 45° 60° 30° 45° 60° 30°
Width (W)
12" 18" 22" 20" 30" 35" 29"
Length (L)
16" 22" 44" 27" 37" 70" 39"
Distance (C)
13" 22" 33" 20" 33" 50" 26"
50W MR16 FL EXN 376 183 52 130 66 20 65
FC
75W MR16 PL EYC 680 332 95 234 119 37 117
Length (L) to the point that FC drops to 10% of maximum.
48"
45° 60° 30°
42" 48" 37"
51" 97" 50"
44" 66" 33"
34 11 39
61 20 70
60"
45° 60° 30°
54" 62" 46"
66" 123" 61"
55" 83" 39"
20 7 26
37 12 47
72"
45° 60° 30°
66" 75" 54"
81" 150" 72"
66" 99" 46"
14 5 18
25 8 33
84"
45°
78"
95"
77"
10
18
60°
88"
176"
116"
3
6
30°
63"
84"
52"
14
25
96"
45° 60°
90" 101"
110" 202"
88" 132"
7 2
13 4
Illumination on Vertical Plane
Unit aimed 0° from vertical, shutter blades set for maximum beam coverage.
6497
Attaches to
1062LV Elbow.
Distance (D)
4' 5' 6' 7' 8' 9'
Sides (S)
20" 26" 32" 38" 44" 50"
50W MR16 FL EXN 108 64 42 30 22 17
FC
75W MR16 PL EYC 195 115 75 53 40 31
10'
56"
14
24
Slot Aperture ✰✰
Lamping
MR16
Frame-In
Kit
Lamping
MR16
2004ICV
20-50W
2004ICV
2000AICV
20-37W
20-35W
Reflector
1975A
Reflector
2025WH White
Available for the 2004ICV only
2006 Shower Trim ✰✰
Frame-In
Kit
Lamping
MR16
Frame-In
Kit
Lamping
MR16
2004ICV
2000AICV
20-37W
20-35W
2004ICV
20-50W
2011 Pinhole w/Matte White Faceplate
These miniature low voltage accent lights feature the
versatile MR16 light source to dramatically highlight
paintings, artwork and other objects while carefully
blending into the ceiling.
Lensed Wet Location ✰✰✰
Frame-In
Kit
Lamping
MR16
2004ICV
2000AICV
20-37W
20-35W
2000AICV
2004ICV
20-37W MR16
20-50W MR16
Reflector
Matte White
Accepts Lytegems. See page 88.
For 1000LV Series
Frame-In Kits and
Trims 1152, 1161.
2026WH Matte White Frosted Glass Diffuser
Lamping
MR16
2022LV
For 2000LV Series
Frame-In Kits and
1052LV Trim.
Recessed Adjustable Mini-Swivel, Eyeball
Frame-In
Kit
Reflector
1975A
Reflector
Available for the 2004ICV only
MR16 Eyeball ✰✰
1975B
2090LV
Etch White
• MR16 Recessed Adjustables provides high impact
accent lighting in a variety of aperture finishes. “Hot
aiming” allow the fixtures to be adjusted while on.
• Elegantly-styled MR16 Mini Swivels sit flush with
the ceiling.
• MR16 Eyeball provides highly adjustable accent
lighting and features a convenient snap-out eyeball
for easy re-lamping.
• 6 3/4" 1100 series utilize reflector trims with integral
transformers that provide the highest wattage and
most adjustability.
Low Voltage Accessories
Lytecaster low voltage downlights feature a variety of
lighting accessories designed for specialized lighting
applications.
• Framing Projector accessory features adjustable
shutter blades that dramatically frame artwork.
Noise
There is some noise produced by low voltage systems:
both from the lamps and the transformers, especially
when dimmed.
Slot Aperture w/Matte White Faceplate
1975B
Pinhole ✰✰
11' 12'
63" 69"
11
9
20 17
• 5" 1000LV series provides higher wattages and
greater adjustability for more demanding projects.
Lytecaster Dimming
Lytecaster low voltage downlights may be dimmed for
added accent lighting impact. Lightolier offers many
Controls options for low voltage fixtures, including
OnSet, MultiSet, Scenist, and Brilliance controls and
dimmers (these are designated by the suffix “VA” or
“LV” following the catalog number). For additional details
on Lightolier’s entire line of dimming control systems
contact Lightolier Controls Division at 1‑800‑526‑2731.
MR16 Socket Replacement
Frame-In
Kit
Reflector
26
Low Voltage Frame-In Kits
Lytecaster Low Voltage Frame-in Kits offer a choice
of installation options and performance levels for high
impact accent lighting.
MR16 Framing Projector Accessory
Step Baffle ✰✰
Frame-In
Kit
Mini-Swivel Round ✰✰
2004ICV ✰✰✰
Designed for new construction where insulation will
be installed around the fixture. Magnetic transformer
is mounted inside housing for easy access. AirSeal®,
complies with MEC and WSEC air leakage requirements.
Pivoting bar-ends, pre-installed screws (or nails), and
tool-free cable clamps for fast, convenient ­installation
of non-metallic Romex®, UL listed for through wiring,
mounting bars lock to T-bar ceiling runners without
accessories, installs in ceilings up to 1" thick, 3/8" integral plaster ceiling ring.
2004ICVN = Preset Nails
3 3/4" Low Voltage Accessories
This noise can be audible depending on the lamp/
transformer combination, the level of background noise,
the sound absorbency of the surrounding surfaces and
the hearing of the people in the space.
Whether the noise is objectionable depends largely on
how critical the application is.
In general, non-dimmed, magnetic transformers will
be audible to most observers in most applications.
PAR36 lamps, in general, emit a characteristic
filament “buzz” or “sizzle” especially when dimmed.
We do not recommend their dimmed use in very quiet
environments.
Recessed Adjustable
Replaceable
socket with
push-pin
connectors
simplifies
maintenance.
Private homes, quiet specialty shops and galleries tend
to be more sensitive to noise than department stores or
circulation spaces. Conference rooms, stores and quiet
restaurants fall in between.
Aperture cone
available in
8 different
finish options.
Where noise can be expected to be a user issue, special
care should be taken to examine all design options
especially the choice of lighting, surface, and furnishing
materials.
“Hot aiming” feature allows
positioning while fixture is
powered.
†Add NM to catalog number for Natural Metal flange.
L y t e c a s t e r
27
5" UniFrame Compact Fluorescent Non-Insulated Ceilings
5" UniFrame Compact Fluorescent Non-Insulated Ceilings
Vertical Trims
Open Downlight
Frame-in Kits
New Construction
Reflector
1001F13U
13w Quad/Triple Tube GX24q-1 Base
120v – 0.16amp max
277v – 0.07amp max
1001F18U
18w Triple Tube GX24q-2 Base
120v – 0.23amp max
277v – 0.10amp max
1001F26U
26w Triple Tube GX24q-3 Base
120v – 0.33amp max
277v – 0.14amp max
Dimming
1001FD26L1 (Lutron 26w – 120v)
26w Triple Tube GX24q-3 Base
120v – 0.33amp max
1001FD26L2 (Lutron 26w – 277v)
26w Triple Tube GX24q-3 Base
277v – 0.14amp max
Designed for new construction where insulation will not
be installed. Frame-In Kit accommodates ceilings up to
1 1/2" thick. “Push In / Twist Out” Stainless Steel trim
clips hold reflector flush to ceiling.
Mounting – Grid Ceiling:
Tool free mounting in grid ceilings. Galvanized Steel
interlocking slide bars adjust to 24 1/8" long accommodating 24" O.C. Ceiling Grid. Adjustable speed clamps
for positive attachment to grid ceiling systems.
Universal Electronic Ballast
120V – 277V UL Listed Electronic Ballast, end of lamp
life protection, class “P” thermally protected, class “A”
sound rating. Minimum starting temperature is 0°F.
1001F18UEM
18w Triple Tube GX24q-2 Base
120v – 0.23amp max
277v – 0.10amp max
1001F26UEM
26w Triple Tube GX24q-3 Base
120v – 0.33amp max
277v – 0.14amp max
Single Wall Wash
Reflector
1001CLSW
1001CDSW
1001WHSW
Specular Clear
Clear Diffuse
Matte White
Mounting – Wood Joist Ceiling:
Integral nailing tabs, alignment guides, fastener holes
and bendable strapping guides for wood joist installation. Galvanized Steel interlocking slide bars adjust from
12 15/16" to 24 1/8" long to accommodate 16" and 24"
O.C. joist spacing, with or without strapping.
Reflector
Lamp
Lamp Lumens
Efficiency
Spacing Criterion
Application Data Single Unit Data 26W
1001CL
26W Triple
1710
54.1%
1.3
Height to
Lighted
Plane
Initial
Center Beam
Foot-Candles
Beam
Diameter
6'
7'
8'
14
10
8
8'
9'
10'
Conversion Factor for Finishes:
CD = footcandle x .90
WH = footcandle x .70
Beam diameter is where foot-candles drop to
50% of maximum.
Reference Data
Multiple Units (26W) Footcandles on Wall
Reflector
Lamp
Lamp Lumens
Efficiency
1001CLSW
26W Triple
1710
54.2 %
Conversion Factor for Finishes:
CD = footcandle x .90
WH = footcandle x .70
Distance
From
Ceiling
in Feet
1'
2'
3'
4'
5'
6'
7'
8'
9'
Multiple Units 26W
Spacing On
Center
Average Initial
Foot-Candles
Watts
Sq. Ft.
4'
5'
6'
54
38
24
1.69
1.17
0.75
24' x 24' x 8.5' Room
Workplane 2.5' Above Floor
80% / 50% / 20% Reflectances
2' from Wall-2' on Center
■ ------- 2' ------- ■
24
23
24
35
34
35
32
33
32
25
25
25
18
19
18
13
13
13
10
10
10
7
7
7
6
6
6
Multiple Units (26W) Footcandles on Wall
Distance
From
Ceiling
in Feet
Emergency Battery: 90 minute battery backup, complete with
charge indicator light and integrated test switch.
Remodeler
1'
2'
3'
4'
5'
6'
7'
8'
9'
2' from Wall-3' on Center
■ ------- 3' ------- ■
19
13
19
26
23
26
23
21
23
17
17
17
13
13
13
9
10
9
7
7
7
6
6
6
4
4
4
2'
3'
3'
21 FC
23 FC
23 FC
Double Wall Wash
Reflector
Designed for existing ceilings where insulation will not
be installed. Frame-In Kit accommodates ceilings up to
2“ thick.
1001FR26U
26w Triple Tube GX24q-3 Base
120v – 0.33amp max
277v – 0.14amp max
1001FR18U
18w Triple Tube GX24q-2 Base
120v – 0.23amp max
277v – 0.10amp max
Universal Electronic Ballast
120V – 277V UL Listed Electronic Ballast, end of lamp
life protection, class “P” thermally protected, class “A”
sound rating. Minimum starting temperature is 0° F.
Mounting – Remodeler:
Attaches securely to any type of ceiling material
without tools using (3) mounting straps provided. Pushin/twist-out clips hold reflector flush to ceiling. Includes
adhesive backed aperture template.
1001F13U 1001FD26MX1 1001FD26L1
1001F18U 1001FD26MX1 1001FD26L2
1001F26U 1001FD26M7U
28
Specular Clear
Clear Diffuse
Matte White
Emergency
1001FD26MX1 (Advance Mark10 – 120v)
26w Triple Tube GX24q-3 Base
120v – 0.33amp max
1001FD26MX2 (Advance Mark10 – 277v)
26w Triple Tube GX24q-3 Base
277v – 0.14amp max
1001FD26M7U (Advance Mark7 – 120/277v)
26w Triple Tube GX24q-3 Base
120v – 0.33amp max
277v – 0.14amp max
Cut Out
Width
Length
Depth
1001CL
1001CD
1001WH
Reference Data
5 1/4"
7 3/4"
12 15/16"
see specification sheet
1001F18UEM
1001F26UEM
1001FR18U
1001FR26U
5 1/4"
9 5/8"
12 15/16"
see specification sheet
5 1/2"
N/A
11 1/2"
see specification sheet
1001CLDW
1001CDDW
1001WHDW
Specular Clear
Clear Diffuse
Matte White
L y t e c a s t e r
29
5" UniFrame Compact Fluorescent Non-Insulated Ceilings (Continued)
5" UniFrame Compact Fluorescent Non-Insulated Ceilings (Continued)
Horizontal Trims
Open Downlight
Reflector
1001HCL Specular Clear
1001HCD Clear Diffuse
1001HWH Matte White
Single Wall Wash
Reflector
1001HCLSW Specular Clear
1001HCDSW Clear Diffuse
1001HWHSW Matte White
Horizontal Trims
Reference Data
Reflector
Lamp
Lamp Lumens
Efficiency
Spacing Criterion 1001HCL
26W Triple
1710
58.6 %
1.2
Application Data Single Unit Data 26W
Multiple Units 26W
Height to
Lighted
Plane
Spacing On
Center
Initial
Center Beam
Foot-Candles
Beam
Diameter
16
12
9
7'
8'
9'
6'
7'
8'
Conversion Factor for Finishes:
CD = footcandle x .90
WH = footcandle x .70
Beam diameter is where foot-candles drop to
50% of maximum.
Reference Data
Multiple Units (26W) Footcandles on Wall
Reflector
Lamp
Lamp Lumens
Efficiency
1001HCLSW
26W Triple
1710
53.4 %
Conversion Factor for Finishes:
CD = footcandle x .90
WH = footcandle x .70
Average Initial
Foot-Candles
Watts
Sq. Ft.
58
40
26
1.63
1.13
0.72
4'
5'
6'
24' x 24' x 8.5' Room
Workplane 2.5' Above Floor
80% / 50% / 20% Reflectances
Fresnel Lensed Downlight
Reflector
1001HCLF Specular Clear
1001HCDF Clear Diffuse
1001HWHF Matte White
1'
2'
Distance
3'
From
4'
Ceiling
5'
in Feet
6'
7'
8'
9'
Clear Lensed Downlight
2' from Wall-2' on Center
■-------- 2'-------- ■
29
27
29
43
43
43
33
33
33
24
25
24
17
18
17
12
13
12
9
9
9
7
7
7
5
5
5
Reflector
1001HCLC Specular Clear
1001HCDC Clear Diffuse
1001HWHC Matte White
Reference Data
Reflector
Lamp
Lamp Lumens
Efficiency
Spacing Criterion 1001HCLF
26W TRIPLE
1710
40.8%
0.9
Application Data Single Unit Data 26W
Multiple Units 26W
Height to
Lighted
Plane
Spacing On
Center
6'
7'
8'
Initial
Center Beam
Foot-Candles
Beam
Diameter
16
12
9
5'
6'
7'
4'
5'
6'
Average Initial
Foot-Candles
Watts
Sq. Ft.
41
28
18
1.88
1.30
0.83
Conversion Factor for Finishes:
CD = footcandle x .90
WH = footcandle x .70
Beam diameter is where foot-candles drop to
50% of maximum.
24' x 24' x 8.5' Room
Workplane 2.5' Above Floor
80% / 50% / 20% Reflectances
Reference Data
Application Data Single Unit Data 26W
Multiple Units 26W
Height to
Lighted
Plane
Spacing On
Center
Reflector
Lamp
Lamp Lumens
Efficiency
Spacing Criterion 1001HCLC
26W TRIPLE
1710
42.8%
1.1
6'
7'
8'
Initial
Center Beam
Foot-Candles
Beam
Diameter
14
10
0
6'
7'
8'
4'
5'
6'
Average Initial
Foot-Candles
Watts
Sq. Ft.
42
29
19
1.88
1.30
0.83
Conversion Factor for Finishes:
CD = footcandle x .90
WH = footcandle x .70
Beam diameter is where foot-candles drop to
50% of maximum.
24' x 24' x 8.5' Room
Workplane 2.5' Above Floor
80% / 50% / 20% Reflectances
Reference Data
Application Data Single Unit Data 26W
Multiple Units 26W
Height to
Lighted
Plane
Spacing On
Center
Multiple Units (26W) Footcandles on Wall
1'
2'
Distance
3'
From
4'
Ceiling
5'
in Feet
6'
7'
8'
9'
Shielded Downlight
Reflector
Reference Data
Reflector
Lamp
Lamp Lumens
Efficiency
Spacing Criterion 1001HWHCB
26W Triple
1710
31.3%
0.9 x 1.0
2'
3'
2' from Wall-3' on Center
■-------- 3'-------- ■
23
16
23
27
29
27
23
21
23
17
17
17
12
12
12
9
9
9
7
7
7
5
5
5
4
4
4
21 FC
23 FC
23 FC
Reflector
1001HCLO Specular Clear
1001HCDO Clear Diffuse
1001HWHO Matte White
Application Data Single Unit Data 26W
Multiple Units 26W
Height to
Lighted
Plane
Spacing On
Center
Initial
Center Beam
Foot-Candles
Beam
Diameter
11
8
6
5'
6'
7'
6'
7'
8'
Beam diameter is where foot-candles drop to
50% of maximum.
1001HACB Aluminum
1001HWHCB Matte White
Opal Lensed Downlight
3'
4'
5'
6'
Average Initial
Foot-Candles
Watts
Sq. Ft.
30
21
14
1.88
1.30
0.83
24' x 24' x 8.5' Room
Workplane 2.5' Above Floor
80% / 50% / 20% Reflectances
Reflector
Lamp
Lamp Lumens
Efficiency
Spacing Criterion 1001HCLO
26W TRIPLE
1710
36.6%
1.2
Conversion Factor for Finishes:
CD = footcandle x .90
WH = footcandle x .70
6'
7'
8'
Initial
Center Beam
Foot-Candles
Beam
Diameter
10
8
6
7'
8'
9'
Beam diameter is where foot-candles drop to
50% of maximum.
4'
5'
6'
Average Initial
Foot-Candles
Watts
Sq. Ft.
36
25
16
1.88
1.30
0.83
24' x 24' x 8.5' Room
Workplane 2.5' Above Floor
80% / 50% / 20% Reflectances
UniFrame offers a wide variety of lens products designed
to perform in diverse applications.
• The clear lens provides optimal lumen output and
light distribution.
• The fresnel lens provides improved shielding of the
lamp source while effectively distributing light.
• Opal lens provides complete shielding of the lamp
source and offers beautiful aesthetics.
UniFrame puts a unique spin on a classic look with our
new floating cross blade design. With rounded edges
that float off of the cone, this new design give the standard crossblade a softer look while effectively shielding
the lamp source.
30
L y t e c a s t e r
31
5" Compact Fluorescent IC/Non-IC Convertible
RF: Residentially
Focused Design
5" Compact Fluorescent Reflector Trims
General Illumination
ENERGY STAR
Taking Fluorescent lighting into the 21st Century,
Lytening RF is designed with all the Residentially
Focused performance and convenience demanded by
high traffic residential environments. Lytening RF offers
significant advantages over incandescent lighting to
residential customers with features like:
• Uses 1/3 less energy
• Instant-On Ballast (Flicker Free)
• Lamps last up to 5x longer
• Incandescent-like illumination†
Start-up illumination levels are 80-90% of full output when used with
non-amalgam lamps
†
The 1004RES series delivers high output, easy
installation and energy smart technology. Developed
with an Energy Star / Title 24 rated Electronic ballast
(120v), this series provides CFL lamping at 13, 18 &
26 watts, 4-Pin. New construction* is AirSeal rated and
complies with MEC/WSEC requirements.
Aperture Cone ✰✰
Frame-in
Kit
Wattage
1004F13 Series 13W
1004F18 Series* 18W
1004F26 Series* 26W
Deep Reflector ✰✰✰
Decorative Glass ✰✰✰
Decorative Glass ✰✰✰
Lamping
Frame-In
Kit
Lamping
Frame-in Kit
Wattage
Lamping
Frame-in Kit
Wattage
Lamping
(1) Triple or Quad
(1) Triple
(1) Triple
1004F13 Series 13W
1004F18 Series 18W
1004F26 Series* 26W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple
1004F13 Series
1004F18 Series
1004F26 Series
13W
18W
26W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
1004F13 Series
1004F18 Series
1004F26 Series
13W
18W
26W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
Reflector
1008†
1010†
1012†
1013†
1013BK†
1013CD†
1013WH
Wet Location
Brushed Gold
Brushed Clear
Specular Gold
Specular Clear
Specular Black
Clear Diffuse
Matte White
Wattage
Reflector
Reflector
1045
Specular Gold
1046
Specular Clear
1046CD Clear Diffuse
1024 Reflector
1021 Cratere Glass
Drop Diffuser ✰✰
Step Baffle ✰✰
Frame-in Kit
Wattage
1004F13 Series** 13W
Lamping
Frame-in Kit
(1) Triple
1004F13 Series 13W
1004F18 Series 18W
1004F26 Series** 26W
1178LX Lexan
RES Series
Convertible IC/Non-IC for new construction ceilings up
to 3" thick. Pivoting mounting bars, preinstalled screws
or nails and tool-free cable clamps for fast, convenient
installation.
Preset Screws
1004F13RES
1004F18RES
1004F26RES
Preset Nails
1004F13RESN
1004F18RESN
1004F26RESN
1004F13 Series 13W
1004F18 Series* 18W
1004F26 Series* 26W
Lamping
(1) Triple or Quad
(1) Triple
(1) Triple
Frame-in Kit
Wattage
1004F13 Series 13W
1004F18 Series* 18W
1004F26 Series* 26W
Reflector
Reflector
1005†
Matte Black
1005WH Matte White
1005BNM Natural Metal Baffle, Natural Metal Flange
1076
Specular Black
1076WH Gloss White
(1) Triple or Quad
(1) Triple
(1) Triple
1078
RESR Series
Remodeler may be used in existing insulated or noninsulated ceilings up to 2" thick. Junction box on flex for
easier mounting in restricted applications.
1004F13RESR; 1004F18RESR; 1004F26RESR
32
(1) Triple or Quad
(1) Triple or Quad
(1) Triple
Lexan
Combine all these features with the ease of installation
that Lytening is famous for and the wide variety of
compatible trims offered to create the perfect lighting
package for any residential application.
Wattage
1004F13 Series** 13W
1004F18 Series** 18W
Lamping
(1) Triple
(1) Triple
Reflector
Frame-in Kit
1004F13RES
1004F13RESR
1004F18RES
1004F18RESR
1004F26RES
1004F26RESR
(120V NPF; 13/18/26W)
5 3/8"
5 3/8"
5 3/4"
5 3/4"
9"
11 3/8"
7 1/2"
7 1/2"
Input Power
Frame-In Kit Total Watts
1004F13RES
16.0
1004F18RES
19.0
1004F26RES
27.0
Minimum starting temperature is 0°F/-18°C.
ENERGY STAR
Lamping
Flat Lens ✰
Frame-in Kit
Basic Reflector ✰
Wattage
Reflector
Lamping
1177LX
Cut Out
Width
Length
Depth
5" Frames
• 13w Quad / Triple Tube IC-Non-IC
• 18w Quad / Triple Tube IC-Non-IC
• 26w Triple Tube IC-Non-IC
Drop Diffuser ✰✰
Reflector
Wattage
Lightolier, an Energy Star partner, is proud to offer
our customers the following products with the Energy
Star® qualified frame-in-kits.
Basic Baffle ✰
*Remodeler requires LAS56R Gasket Kit (sold separately).
Frame-In
Kit
Opal Glass
Energy Star® was created to help consumers easily
identify products, homes, and buildings that save
energy and money, and help protect the environment.
As the government-backed, trusted symbol for energy
efficiency, the Energy Star label identifies highly
efficient products and designates superior energy
performance in homes and buildings. Additional
information is available at the Energy Star Web site
www.energystar.gov.
Amps
0.13
0.16
0.23
Wattage
1004F13 Series 13W
1004F18 Series* 18W
1004F26 Series* 26W
Lamping
(1) Triple or Quad
(1) Triple
(1) Triple
Glass
Wall Wash
Step Baffle ✰✰
Basic Splay ✰
Open Downlight ✰✰✰
Reflector
1071
Perma White
*Recommend Triple Tube for optimal performance.
**Use Triple Tube lamp only.
†Add NM to catalog number for Natural Metal flange.
Visit www.lightolier.com for Product Specification and Instruction Sheets.
Frame-in Kit
Wattage
1004F13 Series 13W
1004F18 Series** 18W
1004F26 Series** 26W
Lamping
Frame-in Kit
(1) Triple or Quad
(1) Triple
(1) Triple
1004F13 Series 13W
1004F18 Series** 18W
1004F26 Series** 26W
Reflector
Reflector
1035 Matte Black Step Baffle
1035WH Matte White Step Baffle
1085 Wattage
Lamping
Frame-In Kit
(1) Triple or Quad
(1) Triple
(1) Triple
1004F13 Series 13W
1004F18 Series 18W
1004F26 Series* 26W
Wattage
Lamping
(1) Triple or Quad
(1) Triple or Quad
(1) Triple
Reflector
Gloss White
1095
Specular Gold
1096
Specular Clear
1096CD Clear Diffuse
*Recommend Triple Tube for optimal performance.
**Use Triple Tube lamp only.
†Add NM to catalog number for Natural Metal flange.
Visit www.lightolier.com for Product Specification and Instruction Sheets.
L y t e c a s t e r
33
5" Compact Fluorescent IC/Non-IC Convertible
CF: Commercially
Focused Design
5" Compact Fluorescent Reflector Trims
General Illumination
ENERGY STAR
Lytening Energy Star ® frames are designed to meet the
needs of our residential and commercial customers with
our Commercially Focused design. Surpassing all the
residential requirements, Lytening CF is designed to
provide superior performance by offering:
• Advance Ballast Technology
• Low THD (Total Harmonic Distortion)
• High Power Factor
• Superior Lamp Life (10,000 Hrs on Average)
Combine the ease of installation that Lytening is famous
for and the wide variety of compatible trims offered to
create the perfect lighting package for any application.
The 1004ES series delivers high output, easy installation
and energy smart technology. Developed with an Energy
Star / Title 24 rated HPF Electronic ballast (120v), this
series provides CFL lamping at 13, 18 & 26 watts, 4Pin. New construction* is AirSeal rated and complies
with MEC/WSEC requirements.
Aperture Cone ✰✰
Frame-in
Kit
Wattage
1004F13 Series 13W
1004F18 Series* 18W
1004F26 Series* 26W
Deep Reflector ✰✰✰
Decorative Glass ✰✰✰
Decorative Glass ✰✰✰
Lamping
Frame-In
Kit
Lamping
Frame-in Kit
Wattage
Lamping
Frame-in Kit
Wattage
Lamping
(1) Triple or Quad
(1) Triple
(1) Triple
1004F13 Series 13W
1004F18 Series 18W
1004F26 Series* 26W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple
1004F13 Series
1004F18 Series
1004F26 Series
13W
18W
26W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
1004F13 Series
1004F18 Series
1004F26 Series
13W
18W
26W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
Reflector
1008†
1010†
1012†
1013†
1013BK†
1013CD†
1013WH
Wet Location
Brushed Gold
Brushed Clear
Specular Gold
Specular Clear
Specular Black
Clear Diffuse
Matte White
Wattage
Reflector
Reflector
1045
Specular Gold
1046
Specular Clear
1046CD Clear Diffuse
1024 Reflector
1021 Cratere Glass
Drop Diffuser ✰✰
Step Baffle ✰✰
Frame-in Kit
Wattage
1004F13 Series** 13W
Lamping
Frame-in Kit
(1) Triple
1004F13 Series 13W
1004F18 Series 18W
1004F26 Series** 26W
1178LX Lexan
RES Series
Convertible IC/Non-IC for new construction ceilings up
to 3" thick. Pivoting mounting bars, preinstalled screws
or nails and tool-free cable clamps for fast, convenient
installation.
Preset Screws
1004F13ES
1004F18ES
1004F26ES
Preset Nails
1004F13ESN
1004F18ESN
1004F26ESN
1004F13 Series 13W
1004F18 Series* 18W
1004F26 Series* 26W
Lamping
(1) Triple or Quad
(1) Triple
(1) Triple
Frame-in Kit
Wattage
1004F13 Series 13W
1004F18 Series* 18W
1004F26 Series* 26W
Reflector
Reflector
1005†
Matte Black
1005WH Matte White
1005BNM Natural Metal Baffle, Natural Metal Flange
1076
Specular Black
1076WH Gloss White
(1) Triple or Quad
(1) Triple
(1) Triple
1078
RESR Series
Remodeler may be used in existing insulated or noninsulated ceilings up to 2" thick. Junction box on flex for
easier mounting in restricted applications.
1004F13ESR; 1004F18ESR; 1004F26ESR
34
(1) Triple or Quad
(1) Triple or Quad
(1) Triple
Lexan
Combine all these features with the ease of installation
that Lytening is famous for and the wide variety of
compatible trims offered to create the perfect lighting
package for any residential application.
Wattage
1004F13 Series** 13W
1004F18 Series** 18W
Lamping
(1) Triple
(1) Triple
Reflector
Frame-in Kit
1004F13ES
1004F13ESR
1004F18ES
1004F18ESR
1004F26ES
1004F26ESR
(120V HPF; 13/18/26W)
5 3/8"
5 3/8"
5 3/4"
5 3/4"
9"
11 3/8"
7 1/2"
7 1/2"
Input Power
Frame-In Kit Total Watts
1004F13ES
16.0
1004F18ES
19.0
1004F26ES
27.0
Minimum starting temperature is 0°F/-18°C.
ENERGY STAR
Lamping
Flat Lens ✰
Frame-in Kit
Basic Reflector ✰
Wattage
Reflector
Lamping
1177LX
Cut Out
Width
Length
Depth
5" Frames
• 13w Quad / Triple Tube IC-Non-IC
• 18w Quad / Triple Tube IC-Non-IC
• 26w Triple Tube IC-Non-IC
Drop Diffuser ✰✰
Reflector
Wattage
Lightolier, an Energy Star partner, is proud to offer
our customers the following products with the Energy
Star® qualified frame-in-kits.
Basic Baffle ✰
*Remodeler requires LAS56R Gasket Kit (sold separately).
Frame-In
Kit
Opal Glass
Energy Star® was created to help consumers easily
identify products, homes, and buildings that save
energy and money, and help protect the environment.
As the government-backed, trusted symbol for energy
efficiency, the Energy Star label identifies highly
efficient products and designates superior energy
performance in homes and buildings. Additional
information is available at the Energy Star Web site
www.energystar.gov.
Amps
0.13
0.16
0.23
Wattage
1004F13 Series 13W
1004F18 Series* 18W
1004F26 Series* 26W
Lamping
(1) Triple or Quad
(1) Triple
(1) Triple
Glass
Wall Wash
Step Baffle ✰✰
Basic Splay ✰
Open Downlight ✰✰✰
Reflector
1071
Perma White
*Recommend Triple Tube for optimal performance.
**Use Triple Tube lamp only.
†Add NM to catalog number for Natural Metal flange.
Visit www.lightolier.com for Product Specification and Instruction Sheets.
Frame-in Kit
Wattage
1004F13 Series 13W
1004F18 Series** 18W
1004F26 Series** 26W
Lamping
Frame-in Kit
(1) Triple or Quad
(1) Triple
(1) Triple
1004F13 Series 13W
1004F18 Series** 18W
1004F26 Series** 26W
Reflector
Reflector
1035 Matte Black Step Baffle
1035WH Matte White Step Baffle
1085 Wattage
Lamping
Frame-In Kit
(1) Triple or Quad
(1) Triple
(1) Triple
1004F13 Series 13W
1004F18 Series 18W
1004F26 Series* 26W
Wattage
Lamping
(1) Triple or Quad
(1) Triple or Quad
(1) Triple
Reflector
Gloss White
1095
Specular Gold
1096
Specular Clear
1096CD Clear Diffuse
*Recommend Triple Tube for optimal performance.
**Use Triple Tube lamp only.
†Add NM to catalog number for Natural Metal flange.
Visit www.lightolier.com for Product Specification and Instruction Sheets.
L y t e c a s t e r
35
5" Incandescent Non-Insulated Ceilings
1002P1 provide: Integral wood joist nailing tabs,
Integral cable clamps for nonmetallic (Romex® ) or
armored (BX® ) cable, UL listed for through wiring.
1003R ✰✰
Designed for existing construction where insulation will
not be installed. This steel frame will accommodate
ceilings up to 2" thick. Pre-installed mounting straps
secure flanged ring without tools and without damaging
plaster or gypsum ceilings. Junction box allows direct
“daisy-chain” wiring to other fixtures. Tool-free cable
clamps allow fast, convenient installation for nonmetallic
(Romex® ) cable.
Deep Specular ✰✰✰
Aperture Cone ✰✰
Cratere Dome Wet Location ✰✰✰
Opal Disk Wet Location ✰✰✰
Opalex Dropped Wet Location ✰✰
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
A19
BR30 PAR30
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
A19
1002P1
1003R
1000P1
100W
100W
100W
1002P1
1003R
1000P1
75W
75W
75W
1002P1
1003R
1000P1
75W
75W
75W
1002P1
1003R
1000P1
75W
75W
75W
1002P1
1003R
1000P1
60W
60W
60W
Reflector
Reflector
1045
Specular Gold
1046
Specular Clear
1046CD Clear Diffuse
1008†
1010†
1012†
1013†
1013BK†
1013CD†
1013WH
Basic Baffle ✰
Step Baffle ✰✰
Cut Out
Width
Length
Depth
1002P1
1003R
5 1/8"
5 3/8"
7 1/2"
5 3/4"
9 5/8"
13"
see specification sheet
Reflector
1024 Brushed Gold
Brushed Clear
Specular Gold
Specular Clear
Specular Black
Clear Diffuse
Matte White
Lamping
A19
BR30 PAR30
Frame-In
Kit
Lamping
A19
BR30 PAR30
1002P1
1003R
1000P1
60W
60W
60W
1002P1
1003R
1000P1
75W
75W
75W
75W
85W
75W
75W Long Neck
75W Long Neck
75W
75W
85W
75W
75W Long Neck
75W Long Neck
75W
Reflector
Reflector
1076
Black
1076WH Matte White
1005†
Matte Black
1005WH Matte White
1005BNM Natural Metal Flange/Baffle
Lamping
A19
BR30 PAR30
Frame-In
Kit
Lamping
A19
BR20 PAR30
1002P1
1003R
1000P1
75W
75W
75W
1002P1
1003R
1000P1
60W 50W
60W 50W
75W
65W 75W Long Neck
85W 75W Long Neck
100W 75W
Reflector
1071
50W Long Neck
50W Long Neck
50W Long Neck
Reflector
Gloss White
Reflector
1021 Cratere Glass
Reflector
Opal Glass
1011
Matte White Faceplate
1000P1
5 1/8"
9"
15 1/2"
1078 Lexan
Open Wet Location ✰
Lensed Wet Location ✰✰✰
Step Baffle Wall Washer ✰✰
Frame-In
Kit
Lamping
PAR30
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
A19
BR30
1002P1
1003R
75W Long Neck**
75W Long Neck**
1002P1
1003R
60W
60W
1002P1
1003R
1000P1
60W
60W
60W
Reflector
Reflector
1084WH Gloss White
1084CD Clear Diffuse
1090 Etch White
Available for 1002P1 / 1003R only
75W
85W
75W
Reflector
1035 Matte Black Step Baffle
1035WH Matte White Step Baffle
**Requires outdoor rated PAR30 Sylvania lamps
Basic Wall Washer ✰
Open Downlight Wall Washer ✰✰✰
75W
A19
Pinhole ✰✰
Frame-In
Kit
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
A19
1002P1
1003R
1000P1
60W
60W
60W
1002P1
75W
Reflector
2'
17
23
21
17
12
9
7
5
4
17
22
21
16
12
9
7
5
5
3'
17
23
21
17
12
9
7
5
4
13
17
15
11
8
7
5
4
3
9
14
14
11
8
7
5
4
3
13
17
15
11
8
7
5
4
3
1095
Specular Gold
1096
Specular Clear
1096CD Clear Diffuse
Reflector
1085 1'
2'
3'
4' 5' 6'
7'
8'
9'
Footcandles with Units 2 Feet from Wall
Gloss White
Available for 1002P1 only
Performance PAR Recessed
Adjustable ✰✰✰
Frame-In
Kit
Lamping
PAR16 PAR20 PAR30
1000P1
75W
50W
75W Short Neck
Reflector
1029†
Matte Black Baffle
1029WH Matte White Baffle
1029CL† Specular Clear
1029GD† Specular Gold
1029CD† Clear Diffuse
1029BK† Specular Black
1029BNM Natural Metal Flange/Baffle
36
75W Long Neck
75W Long Neck
75W
Frame-In
Kit
Basic White Reflector ✰
1000P1 ✰✰
Performance PAR Non-IC is specifically designed for use
with Performance PAR Recessed Adjustable reflector
trims. Accommodates ceilings up to 1" Thick. Integral
wood joist nailing tabs, integral cable clamps for nonmetallic (Romex® ) or armored (BX® ) cable, UL listed for
through wiring, mounting bars lock to T-bar ceiling runners without accessories.
75W
85W
75W
Distance from Ceiling
1002P1 ✰✰
Designed for new construction where insulation will not
be installed. This steel frame will accommodate ceilings
up to 1" thick. Steel mounting bars will extend from 13"
to 27".
5" Incandescent Non-Insulated Ceilings
Accepts Lytegems. See page 88.
†Add NM to catalog number for Natural Metal flange.
Available for 1000P1 only
†Add NM to catalog number for Natural Metal flange.
L y t e c a s t e r
37
5" Incandescent Non-Insulated Ceilings (continued)
1002P1 ✰✰
Designed for new construction where insulation will not
be installed. This steel frame will accommodate ceilings
up to 1" thick. Steel mounting bars will extend from 13"
to 27".
1002P1 provide: integral wood joist nailing tabs, integral cable clamps for nonmetallic (Romex® ) or armored
(BX® ) cable, UL listed for through wiring.
Recessed Adjustable ✰
Step Baffle Eyeball ✰✰
Frame-In
Kit
Lamping
PAR16 PAR20 PAR 30
Frame-In
Kit
Lamping
PAR20 R20
1002P1
1003R
75W
75W
1002P1
1003R
50W
50W
50W
50W
75W
75W
Reflector
1027†
1027WH
1027BK†
1038†
1027CD†
1048†
1027BNM
75W
75W
Reflector
Matte Black Baffle
Matte White Baffle
Specular Black
Specular Gold
Clear Diffuse
Specular Clear
Natural Metal Flange/Baffle
Available for 1002P1 / 1003R only
Basic Eyeball ✰
1003R ✰✰
Designed for existing construction where insulation will
not be installed. This steel frame will accommodate
ceilings up to 2" thick. Pre-installed mounting straps
secure flanged ring without tools and without damaging
plaster or gypsum ceilings. Junction box allows direct
“daisy-chain” wiring to other fixtures. Tool-free cable
clamps allow fast, convenient installation for nonmetallic
(Romex® ) cable.
5" Incandescent Non-Insulated Ceilings (continued)
Frame-In
Kit
Lamping
PAR20
1002P1
1003R
50W
50W
1022 Eyeball w/Black Baffle
1022WH Eyeball w/White Baffle
Available for 1002P1 / 1003R only
Accepts Lytegems. See page 88.
Open
Ideally scaled for residential ceiling heights up to nine
feet, these downlights are available in a choice of finishes to match virtually any interior design. A selection
of general lighting performance options is available to
meet a variety of needs and budgets.
• Deep Specular reflector provides the highest light
output with extremely low glare and is ideally suited
for inexpensive A-lamps.
• Aperture Cones provide more light than black
baffle downlights yet feature very low brightness.
• Die-cast aluminum Step Baffle offers excellent
glare control.
Basic & Spun Baffle
• Basic Baffle provides effective yet economic glare
control.
• One-piece Spun Baffle accommodates higher
wattage BR30 lamping in both standard and shallow
Lytening.
Enclosed
• Opalex Dropped offers a durable Lexan® diffuser
and is fully enclosed, featuring a captive rubber
gasket that seals out dirt and moisture. Suitable for
closets, showers, spas and wet locations.
• Basic Dropped (Lexan® diffuser) and Basic Flush
(central stippled glass lens) are available with 5" and
6 3/4" frames.
• Decorative Lens provides higher lamp wattages
and aesthetic styling. Polycarbonate flange allows
use over Spas and Jacuzzis.
Cratere & Opal Disk
• Opal Disk is created of Triplex Opal glass to provide
even illumination while completely concealing the
light source.
• Cratere Dome features an attractive acid-etched
outer surface with a sandblasted inner surface providing maximum light output with an elegant look.
Performance PAR
Recessed Adjustable
Performance PAR Recessed Accent
Designed for high impact accent lighting, this selection
of reflector trims can be carefully aimed to deliver light
exactly where it is needed.
• Performance PAR Recessed Adjustables provide
a cost-effective alternative to low voltage accent
lighting. Deeply recessed lamps and an inner cut-off
shield assure minimum aperture brightness.
Basic White Reflector & Pinhole
• Basic white reflector provides good light output
for tight budgets.
• Pinhole provides maximum shielding of the light
source with localized light output. An excellent choice
for discreet task lighting.
Open Wall Wash
Designed to match deep specular downlights, these
open wall wash downlights provide a smooth uniform
wash of wall lighting in addition to room side downlighting. They are an excellent way to make a small room
appear more spacious. These fixtures are also good for
lighting shelving or displays.
• 5" Open Downlight Wall Washers are ideal for all
residential wall-washing applications in ceilings to
9.' Open design matches look of 5" deep specular
downlights for a consistent appearance.
Reflector
1082
Basic White Eyeball
Available for 1002P1 / 1003R only
†Add NM to catalog number for Natural Metal flange.
1000P1 ✰✰
Performance PAR Non-IC is specifically designed for use
with Performance PAR Recessed Adjustable reflector
trims. Accommodates ceilings up to 1" Thick. Integral
wood joist nailing tabs, integral cable clamps for nonmetallic (Romex® ) or armored (BX® ) cable, UL listed for
through wiring, mounting bars lock to T-bar ceiling runners without accessories.
Cut Out
Width
Length
Depth
1002P1
1003R
5 1/8"
5 3/8"
7 1/2"
5 3/4"
9 5/8"
13"
see reflector trim
1000P1
5 1/8"
9"
15 1/2"
Interior cut-off shield
prevents view into
fixture from below.
38
Adjustment yoke
(35° tilt)
Accent
This series of versatile line voltage Eyeball units blend
easily into the ceiling and provide highly adjustable
accent lighting. Since they are not recessed, Eyeballs
feature a greater degree of adjustment than recessed
accent lights — up to 45° vertically.
• Step Baffle Eyeball is designed to provide effective
low brightness accent lighting.
• Power Eyeball provides high wattage PAR30
halogen accent lighting on horizontal and vertical
surfaces.
• Basic Eyeball provides economical accent lighting
for horizontal surfaces.
Deeply recessed lamp for
superior glare control.
L y t e c a s t e r
39
5" Incandescent Insulated Ceilings
1000IC ✰✰
IC housings designed to offer a full range of lighting
performance in fully insulated ceiling applications up to
1" thick. Accepts a wide variety of reflector trims and
lamps to 100W.
1000IC
1000AICM
1004ICX
Cut Out
5 1/8"
5 1/8"
5 1/4"
Width
9"
9"
10 3/8"
Length
15 1/2"
15 1/2"
12 1/4"
Depth
7 5/16"
7 5/16"
7 1/4"
Note: 1000IC, 1000AICM, 1004ICX.
Lamp position is 3/4" lower than in standard Non-IC FIK’s.
1000AICM ✰✰
Fully gasketed AirSeal IC housings minimize air leakage
for compliance with WSEC and MEC restricted airflow
requirements. Housings accept the same reflector trims
and lamping options as Standard IC FIK’s.
1000IC/AICM provide integral wood joist nailing tabs,
integral cable clamps for nonmetallic (Romex® ) cable,
UL listed for through wiring, mounting bars lock to T-bar
ceiling runners without accessories.
5" Incandescent Insulated Ceilings
Deep Specular ✰✰✰
Step Baffle ✰✰
Cratere Dome Wet Location ✰✰✰
Opal Disk Wet Location ✰✰✰
Opalex Dropped Wet Location ✰✰
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
A19
BR30 PAR30
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
A19
1004ICX
1000IC
1000AICM
60W
60W
60W
1004ICX
1000IC
1000AICM
40W
40W
40W
1004ICX
1000IC
1000AICM
40W
40W
40W
1004ICX
1000IC
1000AICM
40W
40W
40W
1000IC
1000AICM
40W
40W
Reflector
65W
65W
65W
75W
75W
75W
Reflector
Reflector
1045
Specular Gold
1046
Specular Clear
1046CD Clear Diffuse
1005†
Matte Black
1005WH Matte White
1005BNM Natural Metal Flange/Baffle
Basic Baffle ✰
Aperture Cone ✰✰
Frame-In
Kit
Lamping
A19
BR30 PAR30
Frame-In
Kit
Lamping
A19
BR30 PAR30
1004ICX
1000IC
1000AICM
40W
40W
40W
1004ICX
1000IC
1000AICM
60W
40W
40W
65W
65W
65W
75W Long Neck
75W
75W
Reflector
Reflector
1076
Black
1076WH White
1008†
1010†
1012†
1013†
1013BK†
1013CD†
1013WH
Basic White Reflector ✰
Frame-In
Kit
Lamping
A19
BR30 PAR30
1004ICX
1000IC
1000AICM
52W
40W
40W
65W
65W
65W
75W
65W
65W
75W
75W
75W
Brushed Gold
Brushed Clear
Specular Gold
Specular Clear
Specular Black
Clear Diffuse
Matte White
75W
75W
75W
Reflector
1071
Gloss White
1024 Reflector
Reflector
Cratere Glass
1021 1078 Opal Glass
Open Wet Location ✰
Lensed Wet Location ✰✰✰
Frame-In
Kit
Lamping
PAR30
Frame-In
Kit
Lamping
PAR30
1004ICX
1000IC
1000AICM
60W**
60W**
60W**
1000IC
1000AICM
1004ICX
50W PAR 30S
50W PAR 30S
50W PAR 30S
Reflector
Reflector
1084WH Gloss White
1084CD Clear Diffuse
1090
Performance PAR Recessed Adjustable
✰✰
✰
Frame-In
Kit
Lamping
PAR16 PAR20 PAR30
1000IC
1000AICM
75W
75W
50W
50W
50W
50W
Reflector
Etch White
1029†
1029WH
1029CL†
1029GD†
1029CD†
1029BK†
1029BNM
**Requires outdoor rated PAR30 Sylvania lamps
Step Baffle Wall Washer ✰✰
Lexan
Available for 1000IC / 1000AICM only
Basic Wall Washer ✰
Matte Black Baffle
Matte White Baffle
Specular Clear
Specular Gold
Clear Diffuse
Specular Black
Natural Metal Flange/Baffle
Available for 1000IC / 1000AICM only
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
A19
1004ICX
1000IC
1000AICM
40W
40W
40W
1004ICX
1000IC
1000AICM
40W
40W
40W
Reflector
Reflector
1035 Matte Black Step Baffle
1035WH Matte White Step Baffle
1085 Gloss White
Open Downlight Wall Washer ✰✰✰
75W
A19
Frame-In
Kit
Lamping
A19
1004ICX
1000IC
60W
60W
Distance from Ceiling
1004ICX ✰✰
IC housing designed to offer a full range of lighting performance in fully insulated ceiling applications up to 1"
thick. Accepts a wide choice of reflector trims and lamps
to 100W. AirSeal® complies with MEC and WSEC air
leakage requirements. Pivoting bar-ends, pre-installed
mounting screws (or nails) for nonmetallic (Romex® )
cable, and tool-free cable clamps for fast, convenient
installation.
1004ICXN = Preset nails
1'
2'
3'
4'
5'
6'
7'
8'
9'
Footcandles with Units 2 Feet from Wall
2'
17
23
21
17
12
9
7
5
4
17
22
21
16
12
9
7
5
5
3'
17
23
21
17
12
9
7
5
4
13
17
15
11
8
7
5
4
3
9
14
14
11
8
7
5
4
3
13
17
15
11
8
7
5
4
3
Reflector
1095
Specular Gold
1096
Specular Clear
1096CD Clear Diffuse
Available for 1000IC / 1004ICX only
40
Accepts Lytegems. See page 88.
†Add NM to catalog number for Natural Metal flange.
†Add NM to catalog number for Natural Metal flange.
L y t e c a s t e r
41
5" Incandescent Insulated Ceilings (continued)
Recessed Adjustable ✰
1000IC ✰✰
IC housings designed to offer a full range of lighting
performance in fully insulated ceiling applications up to
1" thick. Accepts a wide variety of reflector trims and
lamps to 100W.
1000IC
1000AICM
1004ICX
Cut Out
5 1/8"
5 1/8"
5 1/4"
Width
9"
9"
10 3/8"
Length
15 1/2"
15 1/2"
12 1/4"
Depth
7 5/16"
7 5/16"
7 1/4"
Note: 1000IC, 1000AICM, 1004ICX.
Lamp position is 3/4" lower than in standard Non-IC FIK’s.
5" Incandescent Insulated Ceilings (continued)
Step Baffle Eyeball ✰✰
Frame-In
Kit
Lamping
PAR16 PAR20
PAR 30
Frame-In
Kit
Lamping
PAR20 R20
1004ICX
1000IC
1000AICM
75W
75W
75W
75W
75W
75W
1004ICX
1000IC
1000AICM
50W
50W
50W
50W
50W
50W
Reflector
1027†
1027WH
1027BK†
1038†
1027CD†
1048†
1027BNM
75W
75W
75W
Reflector
Matte Black Baffle
Matte White Baffle
Specular Black
Specular Gold
Clear Diffuse
Specular Clear
Natural Metal Flange/Baffle
1022 Eyeball w/Black Baffle
1022WH Eyeball w/White Baffle
Basic Eyeball ✰
Frame-In
Kit
Lamping
PAR20 R20
1004ICX
1000IC
1000AICM
50W
50W
50W
Accent
• Power Eyeball utilizes a PAR30 lamp to match similar-sized Open Baffle downlights and provide long,
powerful throws of light from higher ceilings.
• Step Baffle Eyeball provides a deeply shielded lamp
resulting in low brightness accent lighting for horizontal and vertical surfaces.
• 5" Basic Eyeball provides economical accent lighting with higher wattages.
Recessed Adjustable
More economical Recessed Adjustables offer inconspicuous accent lighting for horizontal and vertical surfaces and can be easily coordinated with Step Baffle and
Aperture Cone downlights.
75W
75W
75W
Reflector
1000AICM ✰✰
Fully gasketed AirSeal IC housings minimize air leakage
for compliance with WSEC and MEC restricted airflow
requirements. Housings accept the same reflector trims
and lamping options as Standard IC FIK’s.
1082
Basic White Eyeball
1000IC/AICM provide integral wood joist nailing tabs,
integral cable clamps for nonmetallic (Romex® ) cable,
UL listed for through wiring, mounting bars lock to T-bar
ceiling runners without accessories.
These Step Baffle Eyeballs provide additional highlighting
on the table setting while remaining inconspicuous in the
ceiling.
1004ICX ✰✰
IC housing designed to offer a full range of lighting performance in fully insulated ceiling applications up to 1"
thick. Accepts a wide choice of reflector trims and lamps
to 100W. AirSeal® complies with MEC and WSEC air
leakage requirements. Pivoting bar-ends, pre-installed
mounting screws (or nails) and tool-free cable clamps
for fast, convenient installation.
1004ICXN = Preset nails
1004ICXNQ = Preset nails (Quick Connects)
1004ICXQ = Quick Connects
†Add NM to catalog number for Natural Metal flange.
42
L y t e c a s t e r
43
0 5" Incandescent Convertible Insulated/Non-Insulated Ceilings
1004IC ✰
Convertible IC/Non-IC for new construction ceilings up
to 3" thick. AirSeal®, complies with MEC and WSEC
air leakage requirements when installed as instructed.
Pivoting bar-ends, pre-installed mounting screws, and
tool-free cable clamps for fast, convenient installation.
1004ICN = Preset Nails
1004ICNQ = Preset Nails (Quick Connects)
1004ICQ = Quick Connects
Deep Specular ✰✰✰
Aperture Cone ✰✰
Frame-In
Kit
Lamping IC
A19
Lamping Non-IC
A19
Frame-In
Lamping IC
Kit
A19 BR30 PAR30
1004IC
1004ICR
40W
40W
60W
60W
1004IC
40W
1004ICR 40W
1004SIC
1004SICR
Reflector
1045
Specular Gold
1046
Specular Clear
1046CD Clear Diffuse
1004IC
1004ICR
1004SIC
1004SICR
60W
60W
60W
60W
1004SICR ✰
Shallow remodeler IC/Non-IC housing for use in 2" x
6" joist construction. Junction box on flex for restricted
applications. AirSeal ready*, complies with MEC and
WSEC air leakage requirements when installed as
instructed.
85W
85W
85W
85W
75W
75W
75W
75W
1004IC
5 3/8"
5 3/4"
9"
7 1/2"
1004ICR
5 3/8"
5 3/4"
9"
7 1/2"
1004SIC
5 3/8"
5 3/4"
9"
5 1/2"
Opal Disk Wet Location ✰✰✰
Lensed Wet Location ✰✰✰
Frame-In
Kit
Lamping IC
A19
Lamping Non-IC
A19
Frame-In
Kit
Lamping IC
A19
Lamping Non-IC
A19
Frame-In
Kit
Lamping IC
PAR30
Lamping Non-IC
PAR30
1004IC
1004ICR
1004SIC
1004SICR
N/A
N/A
N/A
N/A
40W
40W
40W
40W
1004IC
1004ICR
N/A
N/A
40W
40W
1004IC
1004ICR
N/A
N/A
75W Shortneck
75W Shortneck
Reflector
1013†
1013BK†
1013CD†
1013WH
Specular Clear
Specular Black
Clear Diffuse
Matte White
Lamping Non-IC
A19 BR30 PAR30
50W Long Neck 40W 75W 75W (LN)
50W Long Neck 40W 75W 75W (LN)
50W Long Neck
- 75W 75W (LN)
50W Long Neck
- 75W 75W (LN)
(LN) = Long Neck
Frame-In Lamping IC
Kit
BR30
PAR30
1004IC
1004ICR
1004SIC
1004SICR
Lamping Non-IC
A19 BR30 PAR30
60W
50W
40W 75W(65) 75W(50)
60W
50W
40W 75W(65) 75W(50)
60W 50W Long Neck -
75W
75W
60W 50W Long Neck -
75W
75W
1021 Reflector
1090
Opal Glass
Etch White
Available for 1004IC / 1004ICR only
Basic Flush Wet Location ✰
Open Wet Location ✰
5", 6 3/4" Basic Dropped
Wet Location ✰
Frame-In
Kit
Lamping IC
A19
Lamping Non-IC
A19
Frame-In
Kit
Lamping IC
PAR30
Lamping Non-IC
PAR30
1004IC
1004ICR
40W
40W
60W
60W
1004IC
1004ICR
75W**
75W**
75W**
75W**
1024 Cratere Glass
Frame-In
Kit
Lamping IC
A19
Lamping Non-IC
A19
1004IC
1004ICR
40W
40W
40W
40W
Reflector
Reflector
1177LX Glass
1081WH Gloss White
1081CD Clear Diffuse
Reflector
Available for 1004IC / 1004ICR only
Available for 1004IC / 1004ICR only
Available for 1004IC / 1004ICR only
1178LX Lexan
**Requires outdoor rated Sylvania PAR30 lamps
Reflector
1005†
Matte Black
1005WH Matte White
1005BNM Natural Metal Flange/Baffle
1076
Black
1076WH White
Regressed Eyeball ✰✰
Step Baffle Eyeball ✰✰
Frame-In
Kit
Lamping
PAR30
Frame-In
Kit
Lamping IC
PAR20R20
Lamping Non-IC
PAR20R20
Frame-In
Kit
Lamping IC
PAR20R20
Lamping Non-IC
PAR20R20
1004IC
1004ICR
50W/75W
50W/75W
1004IC
1004ICR
50W 75W
50W 75W
50W
50W
1004IC
1004ICR
50W 75W
50W 75W
50W
50W
Basic Eyeball ✰
Basic White Reflector ✰
Frame-In
Lamping IC
Kit BR30 PAR30
Lamping Non-IC
A19 BR30PAR30
1004IC
1004ICR
1004SIC
1004SICR
52W
52W
-
-
65W
65W
65W
65W
50W
50W
50W
50W
85W
85W
85W
85W
75W
75W
75W
75W
1071
75W
75W
Reflector
Reflector
Reflector
1088
Black Baffle w/Matte White Flange
1088WH Matte White Baffle w/Flange
1088GW Gloss White Baffle w/Flange
1022 Eyeball w/Black Baffle
1022WH Eyeball w/White Baffle
1082
Available for 1004IC / 1004ICR only
Reflector
Available for 1004IC / 1004ICR only
75W
75W
Basic White Eyeball
Available for 1004IC / 1004ICR only
Gloss White
Basic Wall Washer ✰
1004SICR
5 3/8"
5 3/4"
11 3/8"
5 1/2"
*Requires use of LAS56R Gasket Kit (sold separately).
Frame-In
Kit
Lamping IC
PAR30
Lamping Non-IC
PAR30
1004IC
1004ICR
1004SIC
1004SICR
N/A
N/A
N/A
N/A
40W
40W
40W
40W
Reflector
1085 †Add NM to catalog number for Natural Metal flange.
44
Reflector
Available for 1004IC / 1004ICR only
( ) = Wattages for 1076.
All other wattages apply
Above frames provide tool free cable clamps for
fast, convenient installation, UL listed for through wiring, mounting bars lock to T-bar ceiling runners without
accessories.
Cut Out
Width
Length
Depth
Cratere Dome Wet Location ✰✰✰
Basic Baffle ✰
Reflector
1004SIC ✰
Shallow new construction IC/Non-IC housing for use in
2" x 6" joist construction. Pivoting bar-ends, tool-free
cable clamps and preinstalled mounting screws are
standard. AirSeal, complies with MEC and WSEC air
leakage requirements when installed as instructed.
1004SICN = Preset Nails
50W
60W
50W
60W
50W
50W
1008†
Brushed Gold
1010†
Brushed Clear
1012†
Specular Gold
Step Baffle ✰✰
Frame-In
Lamping IC
Kit
BR30
PAR30
Lamping Non-IC
A19 BR30PAR30
Reflector
Available for 1004IC / 1004ICR only
1004ICR ✰
Remodeler may be used in existing insulated or noninsulated ceilings up to 2" thick. Junction box on flex
for easier mounting in restricted applications. AirSeal®
ready*, complies with MEC and WSEC air leakage
requirements when installed as instructed.
65W
65W
65W
65W
5" Incandescent Convertible Insulated /Non-Insulated Ceilings
Gloss White
†Add NM to catalog number for Natural Metal flange.
L y t e c a s t e r
45
5" Low Voltage Non-Insulated Ceilings
Recessed Adjustable Aperture
Cones ✰✰
1000LV / 1000LVNT ✰✰
Designed for new construction where insulation will not
be installed. Standard new construction MR16 Frame-In
Kits for use in ceilings up to 1" thick. Outboard-mounted
magnetic 120 volt primary transformer ensures cool,
quiet operation and easy access from below the ceiling.
Ideal for general residential and light commercial low
­voltage application. NT allows for remotely mounted
transformer. Integral wood joist nailing tabs, UL listed
for through wiring, Integral cable clamps for nonmetallic
(Romex® ) or armored (BX® ) cable.
1000LVR ✰✰
Designed for existing construction where insulation will
not be installed. Non-IC remodeler for use in existing
ceiling up to 2" thick. Pre-installed mounting straps
secure flanged ring without tools and without damaging
plaster or gypsum ceilings. Integral cable clamps for
nonmetallic (Romex® ) or armored (BX® ) cable.
1000LV
Cut Out
Width
Length
Depth
Lamping
MR16
1000LV
1000LVR
1000LVNT
42-75W
42-75W
42-75W
Reflector
1056LV
1063LV
1064LV
1064CDLV
5 1/8"
5 1/8"
7 1/2"
7 1/2"
11 1/8"
9 5/8"
see specification sheet
Frame-In
Kit
Lamping
MR16
1000LV
1000LVR
1000LVNT
42-65W
42-65W
42-65W
Frame-In
Kit
Lamping
MR16
1000ICV
1004ICV
20-35W
20-50W
Reflector
Reflector
1052LV Pinhole w/Matte White Faceplate
1056LV
1063LV
1064LV
1064CDLV
Recessed Adjustable Step Baffle ✰✰
MR16 Elbow ✰✰
Frame-In
Kit
Lamping
MR16
Frame-In
Kit
Lamping
MR16
1000LV
1000LVR
1000LVNT
42-75W
42-75W
42-75W
1000LV
1000LVR
1000LVNT
42-65W
42-65W
42-65W
Reflector
Reflector
1055LV Matte Black Baffle
1055WHLV Matte White Baffle
1062LV
Recessed Adjustable Aperture
Cones ✰✰
Pinhole ✰✰
Specular Black
Specular Gold
Specular Clear
Clear Diffuse
Specular Black
Specular Gold
Specular Clear
Clear Diffuse
Frame-In
Kit
Lamping
MR16
1000ICV
1004ICV
20-35W
20-50W
Reflector
1055LV Matte Black Baffle
1055WHLV Matte White Baffle
MR16 Elbow ✰✰
Frame-In
Kit
Lamping
MR16
Frame-In
Kit
Lamping
MR16
1000ICV
1004ICV
20-35W
20-37W
1000ICV
1004ICV
20-42W
20-50W
Reflector
Reflector
1052LV Pinhole w/Matte White Faceplate
1062LV
Set screw
locks elbow in
place.
Recessed Adjustable Step Baffle ✰✰
Pinhole ✰✰
Matte White
Accepts Lytegems. See page 88.
1000LVNT
MR16 Remote 1000LVR
Transformer
Accepts Lytegems. See page 88.
Support chain
suspends elbow
during maintenance.
Matte White
1000ICV ✰✰
For use in new construction where fixture will be in
direct contact with thermal insulation. Magnetic transformer is mounted inside housing for easy access.
Features AirSeal® gasketing for compliance with WSEC
and MEC requirements.­ Integral wood joist nailing
tabs, Integral cable clamps for nonmetallic (Romex® )
or armored (BX® ) cable, UL listed for through wiring,
mounting bars lock to T-bar ceiling runners without
accessories, installs in ceilings up to 1" thick.
1004ICV ✰✰
IC housing for use in new construction where fixture will
be in direct contact with thermal insulation. Magnetic
transformer is mounted inside housing for easy access.
AirSeal®, complies with MEC and WSEC air leakage
requirements. Pivoting bar-ends, pre-installed screws
(or nails), and tool-free cable clamps for fast, convenient
­installation. For nonmetallic (Romex® ) cable, UL listed
for through wiring, 3/8" integral plaster ceiling ring,
mounting bars lock to T-bar ceiling runners without
accessories, installs in ceilings up to 1" thick.
1004ICVN = Preset Nails
8608
75W Max.
5 3/8"
5 3/4"
13 1/4"
8608
75W Max.
8609
225W Max.
MR16 Remote Transformer
LVNT Frame-In Kits may be installed in new ceilings up
to 1" thick. Lightolier Remote Transformers 8608 (75W)
and 8609 (225W) are fused and suitable for recessed
installation as instructed.
46
Frame-In
Kit
5" Low Voltage Insulated Ceilings
Accent
This selection of low voltage accent lights is designed to
provide increased power and punch to highlight wall art
and objects from greater distances.
Convenient
replaceable
socket simplifies
maintenance.
• 5" Recessed Adjustable and Pinhole offer
inconspicuous styling.
Durable cast
aluminum elbow
adjusts 70° from vertical.
• MR16 Elbow provides the highest range of
adjustment; 70° maximum when fully extended from
vertical.
8609
225W Max.
MR16 Remote Transformer
LVNT Frame-In Kits may be installed in new ceilings up
to 1" thick. Lightolier Remote Transformers 8608 (75W)
and 8609 (225W) are fused and suitable for recessed
accessible installation as instructed.
Framing Projector
accessory.
Accent Lighting provides dramatic interest in a space by
drawing attention to selected objects and surfaces. It
is typically achieved with adjustable downlights whose
beams can be carefully aimed.
Cut Out
Width
Length
Depth
1000ICV
5 1/8"
9"
15 1/2"
7 5/16"
1004ICV
5 1/4"
10 3/8"
12 1/4"
7 5/16"
L y t e c a s t e r
47
5" Low Voltage 5" Low Voltage Accessories
Low Voltage Frame-In Kits
Lytecaster Low Voltage Frame-in Kits offer a choice
of installation options and performance levels for high
impact accent lighting.
Converts a previously installed 1000 series line voltage
Lytecaster Standard, Remodeler or Insulated Ceiling
Frame-In Kit to accept 1000LV series low voltage
Reflector Trims. Maximum wattage 20-42W with insulated kits and 20-50W with non-insulated kits. Installs
without the need for hard wiring. Compatible with
1002P1, 1000IC, 1003R, 1000AICM
• 2000LV series features the smallest aperture size
(3 3/4") for the most dramatic applications and
widest selection of trim and finish options.
• 5" 1000LV series provides higher wattages and
greater adjustability for more demanding projects.
• 6 3/4" 1100 series utilize reflector trims with integral
transformers that provide the highest wattage and
most adjustability.
• Replaceable lamp socket and “Hot Aiming”
are standard.
Low Voltage Accessories
Lytecaster low voltage downlights feature a variety of
lighting accessories designed for specialized lighting
applications.
• Framing Projector accessory features adjustable
shutter blades that dramatically frame artwork.
Lytecaster Dimming
Lytecaster low voltage downlights may be dimmed for
added accent lighting impact. Lightolier offers many
Controls options for low voltage fixtures, including
OnSet, MultiSet, Scenist, and Brilliance controls and
dimmers (these are designated by the suffix “VA” or
“LV” following the catalog number). For additional details
on Lightolier’s entire line of dimming control systems
contact Lightolier Controls Division at 1‑800‑526‑2731.
Noise
There is some noise produced by low voltage systems
both from the lamps themselves and from the
transformers, especially when dimmed. This noise
can be audible depending on the lamp/transformer
combination, the level of background noise, the
absorbency of the surrounding surfaces and the hearing
of the people in the space.
Lytecaster low voltage downlights feature MR16 and
PAR36 lamps that provide highly focused beams that
are particularly well suited for accent lighting. These low
voltage incandescent sources are also 50% brighter and
last twice as long as normal filament lamps.
MR16 Conversion Kit
MR16 lamps offer a unique punch and sparkle which
is ideal for highlighting small objects such as artwork,
glass and tableware. The MR16 lamp features a powerful central beam surrounded by a less intense “corona.”
The PAR36 lamp provides a well-controlled, glare-free
beam.
1920LV
Compatible Trims
Step Baffle
Specular Cone
1055LV
1055WHLV
1063LV
1064LV
Pinhole
Elbow
1052LV
1062LV
There’s no better way to create high-impact accent
lighting for homes, retail stores and other spaces than
with low voltage halogen down­lighting. By bringing out
form, color and texture in the objects being lighted, low
voltage lighting draws the viewer in and adds excitement
to the composition.
Lytecaster low voltage downlights are designed to
provide a wide range of adjustment. Many feature “hot
aiming” so the beam can be tilted and rotated while the
fixture is on. Adding dimming controls allows the intensity of the beam to be adjusted to the desired effect.
MR16 Framing Projector Accessory
Illumination on Vertical Plane
Shutter blades set for maximum beam coverage.
Distance (D)
24"
36"
Aiming Angle (A)
30° 45° 60° 30° 45° 60°
Width (W)
12" 18" 22" 20" 30" 35"
Length (L)
16" 22" 44" 27" 37" 70"
Distance (C)
13" 22" 33" 20" 33" 50"
50W MR16 FL EXN 376 183 52 130 66 20
FC
75W MR16 PL EYC 680 332 95 234 119 37
Length (L) to the point that FC drops to 10% of maximum.
30°
29"
39"
26"
65
117
48"
45°
42"
51"
44"
34
61
60°
48"
97"
66"
11
20
30°
37"
50"
33"
39
70
60"
45°
54"
66"
55"
20
37
60° 30°
62" 46"
123" 61"
83" 39"
7 26
12 47
72"
45°
66"
81"
66"
14
25
60°
75"
150"
99"
5
8
30°
54"
72"
46"
18
33
84"
45°
78"
95"
77"
10
18
60°
88"
176"
116"
3
6
96"
30°
63"
84"
52"
14
25
45°
90"
110"
88"
7
13
60°
101"
202"
132"
2
4
Illumination on Vertical Plane
Unit aimed 0° from vertical, shutter blades set for maximum beam coverage.
6497
Attaches to
1062LV Elbow.
Distance (D)
4' 5' 6' 7' 8' 9'
Sides (S)
20" 26" 32" 38" 44" 50"
50W MR16 FL EXN 108 64 42 30 22 17
FC
75W MR16 PL EYC 195 115 75 53 40 31
10'
56"
14
24
11' 12'
63" 69"
11
9
20 17
Whether the noise is objectionable depends largely on
how critical the application is.
In general, non-dimmed, magnetic transformers will
be audible to most observers in most applications.
PAR36 lamps, in general, emit a characteristic
filament “buzz” or “sizzle” especially when dimmed.
We do not recommend their dimmed use in very quiet
environments.
MR16 Socket Replacement
1975A
Private homes, quiet specialty shops and galleries tend
to be more sensitive to noise than department stores or
circulation spaces. Conference rooms, stores and quiet
restaurants fall in between.
Where noise can be expected to be a user issue, special
care should be taken to examine all design options
especially the choice of lighting, surface, and furnishing
materials.
The Pinhole’s small aperture allows unobtrusive lighting in both residential and light commercial ­applications.
1975B
1975B
For 2000LV Series
Frame-In Kits and 1052LV
Trim.
1975A
For 1000LV Series
Frame-In Kits and Trims
1152, 1161.
Low voltage accent lighting brings impact, drama and function to restaurants, boutiques, galleries and retail
settings, such as this bakery.
48
L y t e c a s t e r
49
6 3/4" UniFrame Compact Fluorescent Non-Insulated Ceilings
6 3/4" UniFrame Compact Fluorescent Non-Insulated Ceilings
Vertical Trims
Open Downlight
Frame-in Kits
New Construction
Reflector
1101F18U
18w Quad/Triple Tube GX24q-2 Base
120v – 0.23amp max
277v – 0.10amp max
1101F2642U
26w Quad/Triple Tube GX24q-3 Base
32w Triple Tube GX24q-3 Base
42w Triple Tube GX24q-4 Base
120v – 0.33amp max
120v – 0.40amp max
120v – 0.53amp max
277v – 0.14amp max
277v – 0.17amp max
277v – 0.23amp max
Dimming
1101FD2642MX1 (Advance Mark10 - 120v)
1101FD2642MX2 (Advance Mark10 - 277v)
1101FD2642M7U (Advance Mark7 - 120/277v)
26w Quad/Triple Tube GX24q-3 Base
120v – 0.33amp max
277v – 0.14amp max
32w Triple Tube GX24q-3 Base
120v – 0.40amp max
277v – 0.17amp max
42w Triple Tube GX24q-4 Base
120v – 0.53amp max
277v – 0.23amp max
1101F2642UEM
26w Quad/Triple Tube GX24q-3 Base
120v – 0.33amp max
277v – 0.14amp max
32w Triple Tube GX24q-3 Base
120v – 0.40amp max
277v – 0.17amp max
42w Triple Tube GX24q-4 Base
120v – 0.53amp max
277v – 0.23amp max
Designed for new construction where insulation will not
be installed. Frame-In Kit accommodates ceilings up to
1 1/2" thick. “Push In / Twist Out” Stainless Steel trim
clips hold reflector flush to ceiling.
Mounting – Grid Ceiling:
Tool free mounting in grid ceilings. Galvanized Steel
interlocking slide bars adjust to 24 1/8" long accommodating 24" O.C. Ceiling Grid. Adjustable speed clamps
for positive attachment to grid ceiling systems.
Mounting – Wood Joist Ceiling:
Integral nailing tabs, alignment guides, fastener holes
and bendable strapping guides for wood joist installation. Galvanized Steel interlocking slide bars adjust from
12 15/16" to 24 1/8" long to accommodate 16" and 24"
O.C. joist spacing, with or without strapping.
Cut Out
Width
Length
Depth
50
Single Wall Wash
Reflector
1101CLSW
1101CDSW
1101WHSW
Specular Clear
Clear Diffuse
Matte White
Reflector
Lamp
Lamp Lumens
Efficiency
Spacing Criterion
Application Data Single Unit Data 42W
1101CL
42W Triple
3200
67.0 %
1.1
Height to
Lighted
Plane
Initial
Center Beam
Foot-Candles
Beam
Diameter
6'
8'
10'
40
24
15
6'
8'
10'
Conversion Factor for Finishes:
CD = footcandle x .90
WH = footcandle x .70
Beam diameter is where foot-candles drop to
50% of maximum.
Reference Data
Multiple Units (42W) Footcandles on Wall
Reflector
Lamp
Lamp Lumens
Efficiency
1101CLSW
42W Triple
3200
64.0 %
Conversion Factor for Finishes:
CD = footcandle x .90
WH = footcandle x .70
Distance
From
Ceiling
in Feet
1'
2'
3'
4'
5'
6'
7'
8'
9'
Multiple Units 42W
Spacing On
Center
Average Initial
Foot-Candles
Watts
Sq. Ft.
5'
6'
7'
88
56
32
1.91
1.22
0.69
24' x 24' x 8.5' Room
Workplane 2.5' Above Floor
80% / 50% / 20% Reflectances
3' from Wall-3' on Center
■ ------- 2' ------- ■
12
11
12
22
21
22
27
27
28
29
29
29
27
27
27
23
23
23
19
19
19
16
16
16
13
14
13
Multiple Units (42W) Footcandles on Wall
Distance
From
Ceiling
in Feet
Emergency Battery: 90 minute battery backup, complete with
charge indicator light and integrated test switch.
1'
2'
3'
4'
5'
6'
7'
8'
9'
3' from Wall-4' on Center
■ ------- 3' ------- ■
10
7
10
18
14
18
21
20
21
23
21
23
21
20
21
18
17
18
15
15
15
13
13
13
11
11
11
3'
4'
3'
20 FC
21 FC
21 FC
Double Wall Wash
Reflector
Remodeler
Designed for existing ceilings where insulation will not
be installed. Frame-In Kit accommodates ceilings up to
2“ thick.
Specular Clear
Clear Diffuse
Matte White
Emergency
Dimming
1101FD26L1 (Lutron 26w - 120v)
1101FD26L2 (Lutron 26w - 277v)
26w Quad/Triple Tube GX24q-3 Base
120v – 0.33amp max
277v – 0.14amp max
1101FD32L1 (Lutron 32w - 120v)
1101FD32L2 (Lutron 32w - 277v)
32w Triple Tube GX24q-3 Base
120v – 0.40amp max
277v – 0.17amp max
Universal Electronic Ballast
120V – 277V UL Listed Electronic Ballast, end of lamp
life protection, class “P” thermally protected, class “A”
sound rating. Minimum starting temperature is 0°F.
1101CL
1101CD
1101WH
Reference Data
1101CLDW
1101CDDW
1101WHDW
1101FR18U
18w Quad/Triple Tube GX24q-2 Base
120v – 0.23amp max
277v – 0.10amp max
1101FR2642U
26w Quad/Triple Tube GX24q-3 Base
32w Triple Tube GX24q-3 Base
42w Triple Tube GX24q-4 Base
120v – 0.33amp max
120v – 0.40amp max
120v – 0.53amp max
277v – 0.14amp max
277v – 0.17amp max
277v – 0.23amp max
Universal Electronic Ballast
120V – 277V UL Listed Electronic Ballast, end of lamp
life protection, class “P” thermally protected, class “A”
sound rating. Minimum starting temperature is 0° F.
1101FD2642MX1
1101F18U
1101FD26L1 1101FD26L2 1101FD2642MX2
1101F2642U 1101FD32L1 1101FD32L2 1101FD2642M7U
5 1/4"
7 3/4"
12 15/16"
see specification sheet
Specular Clear
Clear Diffuse
Matte White
Mounting – Remodeler:
Accommodates existing ceilings up to 2" thick. Attaches
securely to any type of ceiling material without tools
using (3) mounting straps provided. Push-in/twist-out
clips hold reflector flush to ceiling. Includes adhesive
backed aperture template.
1101FR18U
1101FR2642U 1101F2642UEM
5 1/4"
5 1/2"
9 5/8"
N/A
12 15/16"
11 1/2"
see specification sheet
L y t e c a s t e r
51
6 3/4" UniFrame Compact Fluorescent Non-Insulated Ceilings (Continued)
6 3/4" UniFrame Compact Fluorescent Non-Insulated Ceilings (Continued)
Horizontal Trims
Open Downlight
Reflector
1101HCL Specular Clear
1101HCD Clear Diffuse
1101HWH Matte White
Single Wall Wash
Reflector
1101HCLSW Specular Clear
1101HCDSW Clear Diffuse
1101HWHSW Matte White
Horizontal Trims
Reference Data
Reflector
Lamp
Lamp Lumens
Efficiency
Spacing Criterion 1101HCL
32W Triple
2200
62.0%
1.2
Application Data Single Unit Data 32W
Multiple Units 32W
Height to
Lighted
Plane
Spacing On
Center
Initial
Center Beam
Foot-Candles
Beam
Diameter
20
11
7
8'
10'
12'
6'
8'
10'
Conversion Factor for Finishes:
CD = footcandle x .90
WH = footcandle x .70
Beam diameter is where foot-candles drop to
50% of maximum.
Reference Data
Multiple Units (42W) Footcandles on Wall
Reflector
Lamp
Lamp Lumens
Efficiency
1101HCLSW
42W Triple
3200
61.4 %
Conversion Factor for Finishes:
CD = footcandle x .90
WH = footcandle x .70
Average Initial
Foot-Candles
Watts
Sq. Ft.
78
54
35
1.94
1.35
0.86
4'
5'
6'
24' x 24' x 8.5' Room
Workplane 2.5' Above Floor
80% / 50% / 20% Reflectances
Fresnel Lensed Downlight
Reflector
1101HCLF Specular Clear
1101HCDF Clear Diffuse
1101HWHF Matte White
1'
2'
Distance
3'
From
4'
Ceiling
5'
in Feet
6'
7'
8'
9'
Clear Lensed Downlight
3' from Wall-3' on Center
■-------- 3'-------- ■
22
20
22
47
48
47
47
47
47
35
34
35
28
28
28
22
22
22
17
17
17
14
14
14
11
11
11
Reflector
1101HCLC Specular Clear
1101HCDC Clear Diffuse
1101HWHC Matte White
Reference Data
Reflector
Lamp
Lamp Lumens
Efficiency
Spacing Criterion 1101HCLF
32W Triple
2200
46.2 %
1.0
Application Data Single Unit Data 32W
Multiple Units 32W
Height to
Lighted
Plane
Spacing On
Center
6'
7'
8'
Initial
Center Beam
Foot-Candles
Beam
Diameter
20
15
11
6'
7'
8'
4'
5'
6'
Average Initial
Foot-Candles
Watts
Sq. Ft.
60
41
27
2.06
1.43
0.92
Conversion Factor for Finishes:
CD = footcandle x .90
WH = footcandle x .70
Beam diameter is where foot-candles drop to
50% of maximum.
24' x 24' x 8.5' Room
Workplane 2.5' Above Floor
80% / 50% / 20% Reflectances
Reference Data
Application Data Single Unit Data 32W
Multiple Units 32W
Height to
Lighted
Plane
Spacing On
Center
Reflector
Lamp
Lamp Lumens
Efficiency
Spacing Criterion 1101HCLC
32W Triple
2200
52.8 %
1.0
6'
7'
8'
Initial
Center Beam
Foot-Candles
Beam
Diameter
22
16
12
6'
7'
8'
4'
5'
6'
Average Initial
Foot-Candles
Watts
Sq. Ft.
68
48
31
2.19
1.52
0.97
Conversion Factor for Finishes:
CD = footcandle x .90
WH = footcandle x .70
Beam diameter is where foot-candles drop to
50% of maximum.
24' x 24' x 8.5' Room
Workplane 2.5' Above Floor
80% / 50% / 20% Reflectances
Reference Data
Application Data Single Unit Data 32W
Multiple Units 32W
Height to
Lighted
Plane
Spacing On
Center
Multiple Units (42W) Footcandles on Wall
1'
2'
Distance
3'
From
4'
Ceiling
5'
in Feet
6'
7'
8'
9'
Shielded Downlight
Reflector
Reference Data
Reflector
Lamp
Lamp Lumens
Efficiency
Spacing Criterion 1101HWHCB
32W Triple
2200
37.5%
0.8 x 1.0
4'
4'
4' from Wall-4' on Center
■-------- 4'-------- ■
7
6
7
21
20
21
29
30
29
26
26
26
21
20
21
18
17
18
15
15
15
14
14
14
10
10
10
30 FC
29 FC
29 FC
Reflector
1101HCLO Specular Clear
1101HCDO Clear Diffuse
1101HWHO Matte White
Application Data Single Unit Data 32W
Multiple Units 32W
Height to
Lighted
Plane
Spacing On
Center
6'
7'
8'
Initial
Center Beam
Foot-Candles
Beam
Diameter
18
14
10
6'
7'
8'
Beam diameter is where foot-candles drop to
50% of maximum.
Opal Lensed Downlight
3'
4'
5'
6'
Average Initial
Foot-Candles
Watts
Sq. Ft.
47
32
21
2.19
1.52
0.97
Reflector
Lamp
Lamp Lumens
Efficiency
Spacing Criterion 1101HCLO
32W Triple
2200
46.3 %
1.2
Conversion Factor for Finishes:
CD = footcandle x .90
WH = footcandle x .70
6'
7'
8'
Initial
Center Beam
Foot-Candles
Beam
Diameter
16
12
9
7'
8'
9'
Beam diameter is where foot-candles drop to
50% of maximum.
4'
5'
6'
Average Initial
Foot-Candles
Watts
Sq. Ft.
59
41
26
2.19
1.52
0.97
24' x 24' x 8.5' Room
Workplane 2.5' Above Floor
80% / 50% / 20% Reflectances
24' x 24' x 8.5' Room
Workplane 2.5' Above Floor
80% / 50% / 20% Reflectances
1101HACB Aluminum
1101HWHCB Matte White
With the introduction of UniFrame, Lytecaster now offers
both single and double wall washers for demanding commercial applications. Single and double wall washers are
designed to provide a uniform distribution of light along
the vertical surface while providing room side downlighting to provide continuity throughout the space.
52
L y t e c a s t e r
53
6 3/4" Compact Fluorescent Non-Insulated Ceilings
Specular ✰✰✰
6 3/4" Compact Fluorescent Non-Insulated Ceilings
Aperture Cone ✰✰
Basic Baffle ✰
Basic White Reflector ✰
Basic White Reflector ✰
Frame-In
Kit
Watts
Frame-In
Kit
Watts
1100FTUES
1100FTUESEM
26/32W 1xTriple
26/32W 1xTriple
1100FTUES
1100FTUESEM
26/32W 1xTriple
26/32W 1xTriple
A
L
W
1100FTUES ✰✰✰
The 1100FTUES delivers high output in an energy smart
package. Developed with an Energy Star / Title 24
rated Electronic ballast (120v only), the 1100FTUES
series provides universal CFL lamping at 26 or 32 watts.
Installs in ceilings up to 1" thick.
A
Frame-In
Kit
Watts
1100FTUES
1100FTUESEM
26/32W 1xTriple
26/32W 1xTriple
Lamping Volts
120V/HPF
120V/HPF
Frame-In
Kit
Watts
1100FTUES
1100FTUESEM
26/32W 1xTriple
26/32W 1xTriple
Lamping Volts
Reflector
Reflector
1145
Specular Gold
1146
Specular Clear
1146CD Clear Diffuse
1108†
1110† 1112†
1113†
1113BK†
1113CD†
1113WH
Step Baffle ✰✰
Shallow Specular ✰✰✰
120V/HPF
120V/HPF
Brushed Gold
Brushed Clear
Specular Gold
Specular Clear
Specular Black
Clear Diffuse
Matte White
W
L
1100FTUESEM ✰✰✰
The 1100FTUESEM series delivers high output in an
energy smart package. Developed with an Energy
Star/Title 24 rated Electronic ballast (120v only),
the 1100FTUES series provides universal CFL lamping
at 26 or 32 watts. Installs in ceilings up to 1" thick.
Emergency option battery pack for dry locations provides
90 minute backup.
Frame-In Kit
Watts
Lamping Volts
1100FTUES
1100FTUESEM
26/32W 1xTriple
26/32W 1xTriple
120V/HPF
120V/HPF
Frame-In
Kit
Watts
1100FTUES
1100FTUESEM
26/32W 1xTriple
26/32W 1xTriple
Reflector
Reflector
1105†
Matte Black
1105WH Matte White
1105BNM Natural Metal™ Flange/Baffle
1143
Specular Gold
1144
Specular Clear
1144CD Clear Diffuse
Lamping Volts
120V/HPF
120V/HPF
Frame-In
Kit
Watts
1100FTUES
1100FTUESEM
26/32W 1xTriple
26/32W 1xTriple
Lamping Volts
120V/HPF
120V/HPF
Reflector
Reflector
1179M1 Black
1179WH White
1171 Basic Baffle ✰
Cross Blade ✰✰
Frame-In
Kit
Watts
1100FTUES
1100FTUESEM
26/32W 1xTriple
26/32W 1xTriple
Lamping Volts
120V/HPF
120V/HPF
Lamping Volts
120V/HPF
120V/HPF
Lamping Volts
120V/HPF
120V/HPF
Reflector
1170M1 Gloss White
Gloss White
Basic Wall Washer ✰
Frame-In
Kit
Watts
Lamping Volts
Frame-In
Kit
Watts
1100FTUES
1100FTUESEM
26
26
1xTriple
1xTriple
1100FTUES
1100FTUESEM
26/32W 1xTriple
26/32W 1xTriple
120V/HPF
120V/HPF
Reflector
Reflector
1176 Black
1176WH White
1132
Open Downlight Wall Washer ✰✰✰
Step Baffle Wall Washer ✰✰
Frame-In
Kit
Watts
Frame-In
Kit
Watts
1100FTUES
1100FTUESEM
26/32W 1xTriple
26/32W 1xTriple
1100FTUES
1100FTUESEM
26/32W 1xTriple
26/32W 1xTriple
Lamping Volts
120V/HPF
120V/HPF
Reflector
1185 White
Gloss White
†Add NM to catalog number for Natural Metal flange.
Frame-In Kit Total Watts Amps
1100FTUES (26W)
1100FTUES (32W)
1100FTUESEM (26W)
1100FTUESEM (32W)
29
36
29
36
.24
.31
.24
.31
Minimum starting temperature for 26/32W Triple
Tube is 0° F.
ENERGY STAR
Frames above provide: Integral wood joist nailing
tabs, integral cable clamps for nonmetallic (Romex® )
or armored (BX® ) cable, UL listed for through wiring,
mounting bars lock to T-bar ceiling runners without
accessories.
54
1100FTUES
1102FTUESEM
(120v HPF; 26/32W)
Cut Out
Width
Length
Depth
6 13/16"
9"
12 5/16"
see specification sheet
120V/HPF
120V/HPF
Lamping Volts
Reflector
Reflector
1195 Specular Gold
1196
Specular Clear
1196CD Clear Diffuse
1135 Matte Black Step Baffle
1135WH Matte White Step Baffle
1 x 32W TTT
Distance from Ceiling
Input Power
Lamping Volts
1'
2'
3'
4'
5'
6'
7'
8'
9'
120V/HPF
120V/HPF
Footcandles with Units 2 Feet from Wall
2'
48
54
43
31
22
16
12
9
7
46
51
43
32
23
16
12
9
7
3'
48
54
43
31
22
16
12
9
7
36
39
29
21
15
12
9
7
6
28
31
29
22
16
12
9
7
6
36
39
29
21
15
12
9
7
6
L y t e c a s t e r
55
Energy Star
6 3/4" Compact Fluorescent Non-Insulated Ceilings (continued)
Cratere Dome Wet Location ✰✰✰
Opal Dome Wet Location ✰✰✰
Frame-In
Kit
Watts
Lamping Volts
Frame-In
Kit
Watts
Lamping Volts
1100FTUES
1100FTUESEM
26/32W
26/32W
1xTriple
1xTriple
1100FTUES
1100FTUESEM
26/32W
26/32W
1xTriple
1xTriple
Primary Reasons to Choose Energy Star ® Qualified Lighting
A
L
W
1100FTUES ✰✰✰
The 1100FTUES delivers high output in an energy smart
package. Developed with an Energy Star / Title 24
rated Electronic ballast (120v only), the 1100FTUES
series provides universal CFL lamping at 26 or 32 watts.
Installs in ceilings up to 1" thick.
120V/HPF
120V/HPF
Reflector
1124
120V/HPF
120V/HPF
VS
Reflector
1134
Cratere Glass
Lensed Wet Location ✰✰✰
Opal Glass
Fresnel Lenslite Wet Location ✰✰✰
Energy Consumption
Standard Incandescent
Lighting
A
W
L
1100FTUESEM ✰✰✰
The 1100FTUESEM series delivers high output in an
energy smart package. Developed with an Energy
Star/Title 24 rated Electronic ballast (120v only),
the 1100FTUES series provides universal CFL lamping
at 26 or 32 watts. Installs in ceilings up to 1" thick.
Emergency option battery pack for dry locations provides
90 minute backup.
Frame-In
Kit
Watts
Lamping Volts
Frame-In
Kit
Watts
Lamping Volts
1100FTUES
1100FTUESEM
26/32W
26/32W
1xTriple
1xTriple
1100FTUES
1100FTUESEM
26W
26W
1xTriple
1xTriple
120V/HPF
120V/HPF
Reflector
1190
Reflector
1126
Etch White
White Diffuser Wet Location ✰✰✰
Opal Disk Wet Location ✰✰✰
Frame-In
Kit
Watts
Lamping Volts
Frame-In
Kit
Watts
Lamping Volts
1100FTUES
1100FTUESEM
26W
26W
1xTriple
1xTriple
1100FTUES
1100FTUESEM
26/32W
26/32W
1xTriple
1xTriple
1128
Frames above provide: Integral wood joist nailing
tabs, integral cable clamps for nonmetallic (Romex® )
or armored (BX® ) cable, UL listed for through wiring,
mounting bars lock to T-bar ceiling runners without
accessories.
Fresnel Lens
1)
40 Watt
=
13 Watt
60 Watt
=
18 Watt
75 Watt
=
26 Watt
100 Watt
=
32 Watt
150 Watt
=
42 Watt
2)
Save Energy
120V/HPF
120V/HPF
120V/HPF
120V/HPF
3)
Reflector
1121
White Diffuser
Opal Glass
Opalex Dropped Wet Location ✰✰
Frame-In
Kit
Watts
Lamping Volts
Frame-In
Kit
Watts
Lamping Volts
1100FTUES
1100FTUESEM
26/32W
26/32W
1xTriple
1xTriple
1100FTUES
1100FTUESEM
26/32W
26/32W
1xTriple
1xTriple
Reflector
1177SH
The pin-based compact fluorescent light bulbs used in Energy Star qualified
fixtures last up to five times longer than standard incandescent bulbs. Based on
average usage, these energy efficient lamps can last years. This means fewer
lamp purchases and less time changing light bulbs, a convenience especially in
hard to reach areas.
1178SH
Help Protect the Environment
Products that earn the Energy Star ® label prevent
greenhouse gas emissions by meeting strict energy
efficiency guidelines set by the US Environmental
Protection Agency and the Department of Energy.
That means less energy is generated by power
plants, decreasing the amount of fossil fuels burned,
resulting in less air pollution.
Some luminaires use fluorescent or high intensity discharge (HID) lamps
that contain small amounts of mercury. Such lamps are labeled “Contains
Mercury” and/or with the symbol “Hg”. Lamps that contain mercury must
be disposed of in accordance with local requirements. Information regarding
lamp recycling and disposal can be found at www.lamprecycle.org.
120V/HPF
120V/HPF
Reflector
Lexan
4)
®
Opalex Flush Wet Location ✰✰
120V/HPF
120V/HPF
Save Time
Save Money
Did you know that the average home has approximately 30 lights? By replacing
the five most frequently used lights in your home with Energy Star ® qualified
lighting, you can save more than $60 each year in energy costs. Energy Star ®
qualified light bulbs and fixtures save money because they operate more
efficiently, thus reducing your electricity bill.
If every household in the United States changed the lighting in one room of their
home to Energy Star ®, we would save more than 800 billion kWh of energy
and keep one trillion pounds of greenhouse gases out of the air; our annual energy
savings alone would be equivalent to the annual output of more than 21 power
plants; our annual energy savings could light more than 34 million US homes for
one year.
Lexan
5)
Additional Features
Energy Star ® qualified light fixtures use pin-based
light bulbs to deliver hard-wired energy savings.
Replacement light bulbs can easily be found at
home improvement centers, hardware stores,
lighting showrooms, and other major retail stores,
including on-line stores.
56
=
Energy Star ® qualified lighting products use two-thirds less energy than standard
incandescent lighting, while providing more light output.
Reflector
ENERGY STAR
120V/HPF
120V/HPF
Energy Star®
Lighting
Energy Star ® qualified light fixtures easily blend
with your home décor — they come in a wide
range of styles, with energy-efficient bulbs
that provide the same warm light provided by
incandescent bulbs.
Energy Star ® qualified lighting products generate
about 70% less heat than standard incandescent
lighting, meaning they are cool to the touch and
help reduce household cooling costs.
All Energy Star ® qualified light fixtures carry a
2-year warranty.
L y t e c a s t e r
57
6 3/4" Compact Fluorescent Non-Insulated Ceilings
Shallow Specular ✰✰✰
1100AICMFT ✰✰✰
The 1100AICMFT combines the energy efficiency of CFL
with a fully gasketed AirSeal IC housing. Complies with
MEC and WSEC restricted air leakage requirements.
(1-Lamp, 26/32w Triple Tube (GX24q-3/4-Pin base).
Dual-rated 26/32W 120V HPF Electronic ballast.
Integral wood joist nailing tabs, Integral cable clamps
for nonmetallic (Romex® ) or armored (BX® ) cable, UL
listed for through wiring, 3/8" integral plaster ceiling
ring, mounting bars lock to T-bar ceiling runners without
accessories.
Frame-In
Kit
Watts
Lamping
1100AICMFT 26W (only)1xTriple
6 3/4" Compact Fluorescent Insulated Ceilings
Step Baffle ✰✰
Volts
Frame-In
Kit
120V/HPF
1100AICMFT 26/32W 1xTriple
Watts
Lamping
Opal Dome Wet Location ✰✰✰
Opal Disk Wet Location ✰✰✰
Cratere Dome Wet Location ✰✰✰
Volts
Frame-In
Kit
Volts
Frame-In
Kit
Volts
Frame-In
Kit
120V/HPF
1100AICMFT 26W (only)1xTriple
120V/HPF
1100AICMFT 26W (only)1xTriple
120V/HPF
1100AICMFT 26W (only)1xTriple
Reflector
Reflector
Reflector
1143
Specular Gold
1144
Specular Clear
1144CD Clear Diffuse
1105†
Matte Black
1105WH Matte White
1105BNM Natural Metal Flange/Baffle
1134 Aperture Cone ✰✰
Basic Baffle ✰
Watts
Lamping
Watts
Lamping
Reflector
1121
Opal Glass
Watts
Lamping
Volts
120V/HPF
Reflector
1124
Opal Glass
Cratere Glass
White Diffuser Wet Location ✰✰
Opalex Dropped Wet Location ✰✰
Fresnel Lenslite Wet Location ✰✰✰
Frame-In
Kit
Volts
Frame-In
Kit
Volts
Frame-In
Kit
120V/HPF
1100AICMFT 26W (only)1xTriple
120V/HPF
1100AICMFT 26W (only)1xTriple
Input Power
Frame-In Kit Total Watts
Amps
1100AICMFT (26W)
29
.23
1100AICMFT (32W)
32
.26
Minimum starting temperature for 26/32W Triple Tube is 0° F.
Frame-In
Kit
Watts
Lamping
1100AICMFT 26/32W 1xTriple
Cut Out
Width
Length
Depth
110AICMFT
(120v HPF)
6 13/16"
9"
14 7/8"
6 7/8"
Volts
Frame-In
Kit
120V/HPF
1100AICMFT 26/32W 1xTriple
Reflector
1108†
1110†
1112†
1113†
1113BK†
1113CD†
1113WH
Watts
Lamping
Volts
120V/HPF
Reflector
1176 Black
1176WH White
Brushed Gold
Brushed Clear
Specular Gold
Specular Clear
Specular Black
Clear Diffuse
Matte White
Basic White Reflector ✰
Watts
Lamping
1100AICMFT 26W (only)1xTriple
Reflector
1128
White Diffuser
Basic Wall Washer ✰
Basic White Reflector ✰
Frame-In
Kit
Watts
Lamping
1100AICMFT 26W (only)1xTriple
Frame-In
Kit
Watts
Lamping
1100AICMFT 26W (only)1xTriple
Frame-In
Kit
120V/HPF
1100AICMFT 26W (only)1xTriple
Reflector
1170M1 Gloss White
1171 Watts
Lamping
58
1126 Lamping
Volts
120V/HPF
Fresnel Lens
Frame-In
Kit
120V/HPF
1100AICMFT 26W (only)1xTriple
Watts
Lamping
Volts
120V/HPF
Reflector
1177SH Lexan
Volts
120V/HPF
Gloss White
Lytecaster enclosed downlights bring light to areas
where maximum concealment of the light source is
desired.
Accepts Lytegems. See page 88.
Reflector
1178SH Lexan
Volts
Gloss White
Opal Disk/1100AICMFT FIK
Anobrite®
reflector
maximizes
Triple Tube
output.
Fully gasketed AirSeal
IC-rated housing prevents
loss of heated
and cooled air
through fixture.
Dual wattage ballast
accommodates both
26W and 32W triple
tube lamps.
Reflector
Watts
†Add NM to catalog number for Natural Metal flange.
Volts
Reflector
Lamping
Opalex Flush Wet Location ✰
Reflector
1185 Watts
Cased Opal diffuser
(on safety bale).
AirSeal gasket seals housing
tight against ceiling.
†Add NM to catalog number for Natural Metal flange.
L y t e c a s t e r
59
0 Compact Fluorescent 6 3/4" IC/Non-IC Convertible
RF: Residentially
Focused Design
0 Compact Fluorescent 6 3/4" IC/Non-IC Convertible
General Illumination
ENERGY STAR
Taking Fluorescent lighting into the 21st Century,
Lytening RF is designed with all the Residentially
Focused performance and convenience demanded by
high traffic residential environments. Lytening RF offers
significant advantages over incandescent lighting to
residential customers with features like:
• Uses 1/3 less energy
• Instant-On Ballast (Flicker Free)
• Lamps last up to 5x longer
• Incandescent-like illumination†
Wet Location
Aperture Cone ✰✰
Shallow Anodized ✰✰✰
Opal Dome ✰✰✰
Decorative Glass ✰✰✰
Frame-in Kit
Wattage
Lamping
Frame-in Kit
Wattage
Lamping
Frame-in Kit
Wattage
Lamping
Frame-in Kit
Wattage
Lamping
Frame-in Kit
Wattage
Lamping
1104F13 Series
1104F18 Series
1104F26 Series
13W
18W
26W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
1104F13 Series
1104F18 Series
1104F26 Series*
13W
18W
26W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple
1104F13 Series
1104F18 Series
1104F26 Series
13W
18W
26W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
1104F13 Series
1104F18 Series
1104F26 Series
13W
18W
26W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
1004F13 Series
1004F18 Series
1004F26 Series
13W
18W
26W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
Reflector
Combine with the ease of installation that Lytening is
famous for and the wide variety of compatible trims
offered to create the perfect lighting package for any
residential application.
Cratere Dome ✰✰✰
1108†
Brushed Gold
1110†
Brushed Clear
1112†
Specular Gold
1113†
1113BK†
1113CD†
1113WH
Specular Clear
Specular Black
Clear Diffuse
Matte White
Step Baffle ✰✰
Reflector
Reflector
1143
Specular Gold
1144
Specular Clear
1144CD Specular Clear Diffuse
1124
Reflector
1134
Cratere Glass
Reflector
1121 Opal Glass
Opal Glass
Decorative Flat Lens ✰✰✰
Flat Lens ✰
Basic Opalex – Flush ✰
Frame-in Kit
Lamping
Frame-in Kit
Wattage
Lamping
Frame-in Kit
Wattage
Lamping
(1) Triple/Quad
(1) Triple
(1) Triple
1104F13 Series**
1104F18 Series**
13W
18W
(1) Triple
(1) Triple
1104F13 Series
1104F18 Series
1104F26 Series**
13W
18W
26W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple
Cross Blade ✰✰
Start-up illumination levels are 80-90% when used with non-amalgam
lamps
†
Convertible IC/Non-IC for new construction ceilings up
to 3" thick. Pivoting mounting bars, preinstalled screws
or nails and tool-free cable clamps for fast, convenient
installation.
Preset Screws
1104F13RES
1104F18RES
1104F26RES
Frame-in Kit
Wattage
Lamping
1104F13 Series
1104F18 Series
1104F26 Series
13W
18W
26W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
Reflector
1105† Matte Black
1105WH Matte White
1105BNM Natural Metal Baffle, Natural Metal Flange
1132
Basic Baffle ✰
Basic Baffle ✰
Reflector
(1) Triple
(1) Triple
1190
Frame-in Kit
Frame-in Kit
Wattage
Lamping
Frame-in Kit
Wattage
Lamping
1104F13 Series
1104F18 Series
1104F26 Series
13W
18W
26W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
1104F13 Series
1104F18 Series*
13W
18W
(1) Triple or Quad
(1) Triple or Quad
1104F13RES
1104F13RESR
1104F18RES
1104F18RESR
1104F26RES
1104F26RESR
(120V NPF; 13/18/26W)
New Construction Remodeler
5 3/8"
5 3/8"
5 3/4"
5 3/4"
9"
11 3/8"
7 1/2"
7 1/2"
Amps
0.13
0.16
0.23
1177SH Lexan
Lamping
(1) Triple
1178LX Basic Dropped
Fresnel Lenslite Wet Location ✰✰
Frame-In
Kit
Wattage
Lamping
A19
Frame-In
Kit
Wattage
Lamping
A19
1104F13 Series**
1104F18 Series**
(1) Triple
(1) Triple
1104F13 Series
1104F18 Series**
1104F26 Series**
(1) Triple or Quad
(1) Triple
(1) Triple
13W
18W
Reflector
1128
13W
18W
26W
Reflector
White Diffuser
1126
Fresnel Lens
Reflector
1179M1 Black Baffle
1179WH Gloss White
1176
Black
1176WH Gloss White
Reflector
Glass
White Diffuser ✰✰
Reflector
Basic Opalex – Dropped ✰✰
Wall Wash
Basic Baffle Wall Washer ✰
Basic Wall Washer ✰
Frame-in Kit
Wattage
Lamping
Frame-in Kit
Wattage
Lamping
1104F13 Series
1104F18 Series
1104F26 Series**
13W
18W
26W
(1) Triple or Quad
(1 Triple or Quad
(1) Triple
1104F13 Series
1104F18 Series
1104F26 Series**
13W
18W
26W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple
Basic White Reflector ✰
1104F13RESR; 1104F18RESR; 1104F26RESR
Input Power
Frame-In Kit Total Watts
1104F13RES
16.0
1104F18RES
19.0
1104F26RES
27.0
Minimum starting temperature 0°F/-18°C.
Wattage
1004F13 Series** 13W
Reflector
1177LX
Decorative Glass
Drop Diffuser ✰✰
White
Preset Nails
1104F13RESN
1104F18RESN
1104F26RESN
Remodeler may be used in existing insulated or noninsulated ceilings up to 2" thick. Junction box on flex for
easier mounting in restricted applications.
60
13W
13W
Reflector
Reflector
Cut Out
Width
Length
Depth
Frame-In
Lamping
Kit
Wattage A19
1104F13 Series**
1104F18 Series**
Wattage
1104F13 Series
13W
1104F18 Series** 18W
1104F26 Series** 26W
Frame-in Kit
Wattage
Lamping
1104F13 Series
1104F18 Series
1104F26 Series
13W
18W
26W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
Frame-in Kit
Wattage
Lamping
Reflector
1104F13 Series
1104F18 Series
1104F26 Series*
13W
18W
26W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
1178SH Lexan
Reflector
1171
Reflector
Reflector
1135
Matte Black Step Baffle
1135WH Matte White Step Baffle
1185
Gloss White Eyelid
Gloss White
*Recommend Triple Tube for optimal performance.
**Use Triple Tube lamp only.
†Add NM to catalog number for Natural Metal flange.
*Recommend Triple Tube for optimal performance.
**Use Triple Tube lamp only.
†Add NM to catalog number for Natural Metal flange.
Visit www.lightolier.com for Product Specification and Instruction Sheets.
Visit www.lightolier.com for Product Specification and Instruction Sheets.
L y t e c a s t e r
61
0 Compact Fluorescent 6 3/4" IC/Non-IC Convertible
CF: Commercially
Focused Design
0 Compact Fluorescent 6 3/4" IC/Non-IC Convertible
General Illumination
ENERGY STAR
Wet Location
Aperture Cone ✰✰
Shallow Anodized ✰✰✰
Cratere Dome ✰✰✰
Opal Dome ✰✰✰
Decorative Glass ✰✰✰
Lytening Energy Star ® frames are designed to meet the
needs of our residential and commercial customers with
our Commercially Focused design. Surpassing all the
residential requirements, Lytening CF is designed to
provide superior performance by offering:
• Advance Ballast Technology
• Low THD (Total Harmonic Distortion)
• High Power Factor
• Superior Lamp Life (10,000 Hrs on Average)
Frame-in Kit
Wattage
Lamping
Frame-in Kit
Wattage
Lamping
Frame-in Kit
Wattage
Lamping
Frame-in Kit
Wattage
Lamping
Frame-in Kit
1104F13 Series
1104F18 Series
1104F2632 Series
13W
18W
26/32W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
1104F13 Series
1104F18 Series
1104F2632 Series*
13W
18W
26/32W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple
1104F13 Series
1104F18 Series
1104F2632 Series
13W
18W
26/32W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
1104F13 Series
1104F18 Series
1104F2632 Series
13W
18W
26/32W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
1004F13 Series 13W
1004F18 Series 18W
1004F2632 Series 26/32W
Combine the ease of installation that Lytening is famous
for and the wide variety of compatible trims offered to
create the perfect lighting package for any application.
1108†
Brushed Gold
1110†
Brushed Clear
1112†
Specular Gold
The 1104ES series delivers high output, easy installation
and energy smart technology. Developed with an Energy
Star / Title 24 rated HPF Electronic ballast (120v), this
series provides CFL lamping at 13, 18 & 26 watts, 4Pin. New construction* is AirSeal rated and complies
with MEC/WSEC requirements.
Reflector
1113†
1113BK†
1113CD†
1113WH
Specular Clear
Specular Black
Clear Diffuse
Matte White
Step Baffle ✰✰
Reflector
Reflector
1143
Specular Gold
1144
Specular Clear
1144CD Specular Clear Diffuse
1124
Preset Screws
1104F13ES
1104F18ES
1104F2632ES
Preset Nails
1104F13ESN
1104F18ESN
1104F2632ESN
Frame-in Kit
Wattage
Lamping
1104F13 Series
1104F18 Series
1104F2632 Series
13W
18W
26/32W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
13W
13W
1105† Matte Black
1105WH Matte White
1105BNM Natural Metal Baffle, Natural Metal Flange
1132
Basic Baffle ✰
Basic Baffle ✰
Amps
0.13
0.16
0.23
Opal Glass
Lamping
Frame-in Kit
Wattage
Lamping
Frame-in Kit
Wattage
Lamping
(1) Triple/Quad
(1) Triple
(1) Triple
1104F13 Series**
1104F18 Series**
13W
18W
(1) Triple
(1) Triple
1104F13 Series
1104F18 Series
1104F2632 Series**
13W
18W
26/32W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple
Wattage
Reflector
(1) Triple
(1) Triple
1190
Basic Opalex – Flush ✰
Drop Diffuser ✰✰
White
Wattage
Frame-in Kit
Wattage
Lamping
Frame-in Kit
Wattage
Lamping
1104F13 Series
1104F18 Series
1104F2632 Series
13W
18W
26/32W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
1104F13 Series
1104F18 Series*
13W
18W
(1) Triple or Quad
(1) Triple or Quad
Reflector
1177LX
Decorative Glass
Frame-in Kit
Reflector
Glass
1177SH Lexan
White Diffuser ✰✰
Lamping
(1) Triple
1178LX Basic Dropped
Fresnel Lenslite Wet Location ✰✰
Frame-In
Kit
Wattage
Lamping
A19
Frame-In
Kit
Wattage
Lamping
A19
1104F13 Series**
1104F18 Series**
(1) Triple
(1) Triple
1104F13 Series
13W
1104F18 Series**
18W
1104F2632 Series** 26/32W
(1) Triple or Quad
(1) Triple
(1) Triple
13W
18W
Reflector
1128
Reflector
White Diffuser
1126
Fresnel Lens
Reflector
1179M1 Black Baffle
1179WH Gloss White
Basic Opalex – Dropped ✰✰
Wall Wash
Basic Baffle Wall Washer ✰
Basic Wall Washer ✰
Frame-in Kit
Wattage
Lamping
Frame-in Kit
Wattage
Lamping
1104F13 Series
1104F18 Series
1104F2632 Series**
13W
18W
26/32W
(1) Triple or Quad
(1 Triple or Quad
(1) Triple
1104F13 Series
1104F18 Series
1104F2632 Series**
13W
18W
26/32W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple
Basic White Reflector ✰
1104F13ESR; 1104F18ESR; 1104F26/32ESR
62
1104F13 Series**
1104F18 Series**
Reflector
1176
Black
1176WH Gloss White
Input Power
Frame-In Kit Total Watts
1104F13ES
16.0
1104F18ES
19.0
1104F26ES
27.0
Minimum starting temperature 0°F/-18°C.
1121 Frame-in Kit
Reflector
1104F13ES
1104F13ESR
1104F18ES
1104F18ESR
1104F26ES
1104F26ESR
(120V NPF; 13/18/26W)
New Construction Remodeler
5 3/8"
5 3/8"
5 3/4"
5 3/4"
9"
11 3/8"
7 1/2"
7 1/2"
Reflector
Opal Glass
Flat Lens ✰
1004F13 Series** 13W
Remodeler may be used in existing insulated or noninsulated ceilings up to 2" thick. Junction box on flex for
easier mounting in restricted applications.
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
Decorative Flat Lens ✰✰✰
1104F13 Series
13W
1104F18 Series** 18W
1104F2632 Series**26/32W
Frame-In
Lamping
Kit
Wattage A19
Reflector
Reflector
Cut Out
Width
Length
Depth
1134
Lamping
Cross Blade ✰✰
*Remodeler requires LAS56R Gasket Kit (sold separately).
Convertible IC/Non-IC for new construction ceilings up
to 3" thick. Pivoting mounting bars, preinstalled screws
or nails and tool-free cable clamps for fast, convenient
installation.
Reflector
Cratere Glass
Wattage
Frame-in Kit
Wattage
Lamping
1104F13 Series
1104F18 Series
1104F2632 Series
13W
18W
26/32W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
Frame-in Kit
Wattage
Lamping
Reflector
1104F13 Series
1104F18 Series
1104F2632 Series*
13W
18W
26/32W
(1) Triple or Quad
(1) Triple or Quad
(1) Triple or Quad
1178SH Lexan
Reflector
1171
Reflector
Reflector
1135
Matte Black Step Baffle
1135WH Matte White Step Baffle
1185
Gloss White Eyelid
Gloss White
*Recommend Triple Tube for optimal performance.
**Use Triple Tube lamp only.
†Add NM to catalog number for Natural Metal flange.
*Recommend Triple Tube for optimal performance.
**Use Triple Tube lamp only.
†Add NM to catalog number for Natural Metal flange.
Visit www.lightolier.com for Product Specification and Instruction Sheets.
Visit www.lightolier.com for Product Specification and Instruction Sheets.
L y t e c a s t e r
63
6 3/4" Compact Fluorescent Low Profile
1102T Series (Twin Tube) ✰✰✰
Low Profile Frame-In Kit for two 13W Twin Tube lamps
(GX23-2-Pin base). Shallow 3 7/8" depth (with reflector
trim) permits installation in shallow plenums. For use
with Low Profile reflector trims only. Magnetic ballast.
1102T Series (Quad Tube) ✰✰✰
Low Profile Frame-In Kit for two 13W, 18W or 26W
(G24q-1,2,3/4-Pin base) Quad Tube lamps. Shallow 3
7/8" depth (with reflector trim) permits installation in
shallow plenums. For use with Low Profile reflector trims
only. Electronic 120V/277V HPF ballast with end of life
circuit protection.
Above frames provide: Integral wood joist nailing
tabs, Integral cable clamps for nonmetallic (Romex® )
or armored (BX® ) cable, UL listed for through wiring,
mounting bars lock to T-bar ceiling runners without
accessories, installs in ceilings up to 1" thick.
1102TH1R ✰✰✰
Energy-efficient 13W Twin Tube (GX23/2-Pin base)
Remodelers tackle installations in plenums as shallow
as 3 7/8". Works in ceilings up to 2" thick. Magnetic
ballast, 120HPF.
Input Power
Total Watts
1102T1
1102TH1
1102TH2
1102T13U
1102T18U
1102T26U
1102TM1
35
32
32
33
40
56
31
Amps
0.60
0.28
0.16
0.28/0.12
0.34/0.15
0.47/0.21
.028
Minimum starting temperature for 13W Twin Tube is 32° F.
Minimum starting temperature for 13/18/26W Quad Tube is 0° F.
1102T1(120v NPF)
1102T13U(Elec 13W)
1102TH1(120v HPF) 1102T18U(Elec 18W)
1102TH2(277v HPF) 1102T26U(Elec 26W)
Cut Out
Width
Length
Depth
6 13/16"
6 13/16"
9"
9"
15 11/16"
15 11/16"
see specification sheet
1102TH1R
(120v HPF)
7"
7"
8"
6 3/4" Compact Fluorescent Low Profile
Low Profile Specular Cone ✰✰✰
Low Profile Cross Blade ✰✰
Frame-In
Kit
Watts
Lamping
Volts
Frame-In
Kit
Watts
Lamping
Volts
1102T1
1102TH1
1102TH2
1102T13U
1102T18U
1102T26U
1102T1R
13W
13W
13W
13W
18W
26W
13W
2xTwin
2xTwin
2xTwin
2xQuad
2xQuad
2xQuad
2xTwin
120V/NPF
120V/HPF
277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/HPF
1102T1
1102TH1
1102TH2
1102T13U
1102T18U
1102T26U
1102T1R
13W
13W
13W
13W
18W
26W
13W
2xTwin
2xTwin
2xTwin
2xQuad
2xQuad
2xQuad
2xTwin
120V/NPF
120V/HPF
277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/HPF
Reflector
Reflector
1113TGD Specular Gold/Gloss White Flange
1113TCL Specular Clear/Gloss White Flange
1132T
Frame-In
Kit
Watts
Lamping
Volts
1102T1
1102TH1
1102TH2
1102TH13U
1102TH18U
1102TH26U
1102TH1R
13W
13W
13W
13W
18W
26W
13W
2xTwin
2xTwin
2xTwin
2xQuad
2xQuad
2xQuad
2xTwin
120V/NPF
120V/HPF
277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/HPF
Reflector
Gloss White
1178T
Suitable for wall mounting (2-13W TT)
Lexan® Diffuser/Gloss White Flange
For white diffuser order PL1114
Suitable for wall mounting (2-13W)
Low Profile Step Baffle
Wall Washer ✰✰
Low Profile Step Baffle ✰✰
Frame-In
Kit
Watts
Lamping
Volts
1102T1
1102TH1
1102TH2
1102T13U
1102T18U
1102T26U
1102T1R
13W
13W
13W
13W
18W
26W
13W
2xTwin
2xTwin
2xTwin
2xQuad
2xQuad
2xQuad
2xTwin
120V/NPF
120V/HPF
277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/HPF
Reflector
1135T
Matte Black Step Baffle/Gloss White Flange
1135TWH Gloss White Step Baffle/Gloss White Flange
Frame-In
Kit
Watts
Lamping
Volts
1102T1
1102TH1
1102TH2
1102T13U
1102T18U
1102T26U
1102T1R
13W
13W
13W
13W
18W
26W
13W
2xTwin
2xTwin
2xTwin
2xQuad
2xQuad
2xQuad
2xTwin
120V/NPF
120V/HPF
277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/HPF
Suitable for wall mounting (2-13W)
Frame-In
Kit
Watts
Lamping
Volts
Frame-In
Kit
Watts
Lamping
Volts
1102T1
1102TH1
1102TH2
1102T13U
1102T18U
1102T26U
1102T1R
13W
13W
13W
13W
18W
26W
13W
2xTwin
2xTwin
2xTwin
2xQuad
2xQuad
2xQuad
2xTwin
120V/NPF
120V/HPF
277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/HPF
1102T1
1102TH1
1102TH2
1102T13U
1102T18U
1102T26U
1102T1R
13W
13W
13W
13W
18W
26W
13W
2xTwin
2xTwin
2xTwin
2xQuad
2xQuad
2xQuad
2xTwin
120V/NPF
120V/HPF
277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/HPF
Beneath HVAC ducts.
Inside shallow plenums.
At 3 7/8" in depth, Lytecaster compact fluorescent downlights deliver high performance in ­residential and
commercial applications with limited plenum access.
Reflector
Fresnel Lens/Gloss White Flange
Suitable for wall mounting in damp locations (2-13W TT)
Under sprinkler lines.
1105T
Matte Black Baffle/Gloss White Flange
1105TWH Gloss White Baffle/Gloss White Flange
Low Profile White Diffuser
Wet Location ✰✰
Reflector
Between 2" x 4" joists.
Reflector
Low Profile Fresnel Lenslite
Wet Location ✰✰
1126T
64
Low Profile Basic Opalex
Wet Location ✰
1128T
Gloss White
Suitable for wall mounting in damp locations (2-13W TT)
Accepts Lytegems. See page 88.
L y t e c a s t e r
65
6 3/4" Compact Fluorescent Low Profile Emergency Non-Insulated Ceilings
1102T Series (Quad Tube) & 1102TM Series
(Twin Tube) ✰✰✰
For use with Low Profile reflector trims only. Emergency
Option Battery Pack provides 90-minute back-up.
One lamp is illuminated during emergency operation.
Contains inverter/ battery charger and a maintenancefree Ni-Cad battery. Test switch and indicator light are
provided with 24" of flex. May be remote mounted.
2-Lamp/13W, 18W or 26W Quad Tube lamp (G24q1,2,3/4-Pin base).
1102T Series
2-Lamp, 13, 18 or 26W Quad Tube lamp (GX24q1,2,3/4-Pin base). Electronic 120V/277V HPF ballast.
Low Profile Specular Cone ✰✰✰
Low Profile Cross Blade ✰✰
Frame-In
Kit
Watts
Lamping
Volts
Frame-In
Kit
Watts
Lamping
Volts
1102TM1
1102TM2
1102T13UEM
1102T18UEM
1102T26UEM
13W
13W
13W
18W
26W
2xTwin
2xTwin
2xQuad
2xQuad
2xQuad
120V/HPF
277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/277V/HPF
1102TM1
1102TM2
1102T13UEM
1102T18UEM
1102T26UEM
13W
13W
13W
18W
26W
2xTwin
2xTwin
2xQuad
2xQuad
2xQuad
120V/HPF
277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/277V/HPF
Reflector
Reflector
1113TGD Specular Gold/Gloss White Flange
1113TCL Specular Clear/Gloss White Flange
1132T
Total Watts Amps (120/277V)
1102TM1
1102TM2
1102T13UEM
1102T18UEM
1102T26UEM
34.3
48.1
37
44
60
0.30
0.19
0.31/0.13
0.37/0.17
0.49/0.22
Minimum starting temperature for 13W Twin Tube is 32° F (0° F w/elec.
ballast).
Low Profile Step Baffle
Wall Washer ✰✰
Ballast
Tube
Cut Out
Width
Length
Depth
Mag (13W) Elec. (13W) Elec. (18W) Elec. (26W)
Twin
Quad
Quad
Quad
6 13/16" 6 13/16"
6 13/16"
6 13/16"
9"
9"
9"
9"
18 1/4"
18 1/4"
18 1/4"
18 1/4"
see reflector trim
Frame-In
Kit
Watts
Lamping
Volts
1102TM1
1102TM2
1102T13UEM
1102T18UEM
1102T26UEM
13W
13W
13W
18W
26W
2xTwin
2xTwin
2xQuad
2xQuad
2xQuad
120V/HPF
277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/277V/HPF
Reflector
Watts
Lamping
Volts
1102TM1
1102TM2
1102T13UEM
1102T18UEM
1102T26UEM
13W
13W
13W
18W
26W
2xTwin
2xTwin
2xQuad
2xQuad
2xQuad
120V/HPF
277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/277V/HPF
Reflector
Gloss White
1178T
Frame-In
Kit
Watts
Lamping
Volts
1102TM1
1102TM2
1102T13UEM
1102T18UEM
1102T26UEM
13W
13W
13W
18W
26W
2xTwin
2xTwin
2xQuad
2xQuad
2xQuad
120V/HPF
277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/277V/HPF
Reflector
1105T
Matte Black/Gloss White Flange
1105TWH Gloss White/Gloss White Flange
Low Profile Fresnel Lenslite
Wet Location ✰✰
Low Profile White Diffuser
Wet Location ✰✰
Frame-In
Kit
Watts
Lamping
Volts
Frame-In
Kit
Watts
Lamping
Volts
1102TM1
1102TM2
1102T13UEM
1102T18UEM
1102T26UEM
13W
13W
13W
18W
26W
2xTwin
2xTwin
2xQuad
2xQuad
2xQuad
120V/HPF
277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/277V/HPF
1102TM1
1102TM2
1102T13UEM
1102T18UEM
1102T26UEM
13W
13W
13W
18W
26W
2xTwin
2xTwin
2xQuad
2xQuad
2xQuad
120V/HPF
277V/HPF
120V/277V/HPF
120V/277V/HPF
120V/277V/HPF
Reflector
1126T
Lexan® Diffuser/Gloss White Flange
Lytecaster compact fluorescent downlights provide broad ambient illumination and a sense of spaciousness in this
professional setting.
Reflector
Fresnel Lens/Gloss White Flange
Suitable for wall mounting in damp locations (2-13W TT)
66
Frame-In
Kit
Low Profile Step Baffle ✰✰✰
1135T
Matte Black Step Baffle/Gloss White Flange
1135TWH Gloss White Step Baffle/Gloss White Flange
1102TM1
1102T13UEM 1102T18UEM 1102T26UEM
1102TM2
Low Profile Basic Opalex
Wet Location ✰✰
For white diffuser order 1913T
1102TM Series
2-Lamp, 13W Twin Tube lamp (GX23/2-Pin base).
Magnetic 120V or 277V HPF ballast.
Input Power
6 3/4" Compact Fluorescent Low Profile Emergency Non-Insulated Ceilings
1128T
Gloss White
Suitable for wall mounting in damp locations (2-13W TT)
Accepts Lytegems. See page 88.
L y t e c a s t e r
67
6 3/4" Incandescent Non-Insulated Ceilings
6 3/4" Incandescent Non-Insulated Ceilings
Performance Specular ✰✰✰
1102P1 ✰✰
Designed for new construction where insulation will not
be installed. This steel frame will accommodate ceilings
up to 1" thick. Steel mounting bars will extend from 13"
to 27". Integral wood joist nailing tabs, integral cable
clamps for nonmetallic (Romex® ) or armored (BX® )
cable, mounting bars lock to T-bar ceiling runners without accessories, UL listed for through wiring.
Cut Out
Width
Length
Depth
68
1102P1
1103R
6 13/16"
7"
9"
7 3/8"
11 1/8"
14 9/16"
see specification sheet
Basic Baffle ✰
Basic Baffle ✰
Basic White Reflector ✰✰
Frame-In
Kit
Lamping
PAR38
PAR38
Cool Beam
BR40
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
A19
BR40
PAR38
Frame-In
Kit
Lamping
A19
BR30
PAR30
Frame-In
Kit
Lamping
A19
BR30
PAR30
1102P1
1103R
250W
250W
150W
150W
150W
150W
1102P1
1103R
100W
100W
1102P1
1103R
100W
100W
150W
150W
1102P1
1103R
75W
75W
75W Long Neck
75W Long Neck
1102P1
1103R
75W
75W
75W Long Neck
75W Long Neck
Reflector
1149
1150
1151
1151CD
Specular Black
Specular Gold
Specular Clear
Clear Diffuse
Aperture Cone ✰✰
Frame-In
Kit
Lamping
A19 A21
1102P1
1103R
100W 150W 150W 150W
100W 150W 150W 150W
1108†
1110†
1112†
1113†
1113BK†
1113CD†
1113WH
150W
150W
85W
85W
85W
85W
Reflector
Reflector
Reflector
Reflector
1143
Specular Gold
1144
Specular Clear
1144CD Clear Diffuse
1176
Black
1176WH White
1179M1 Black Baffle
1179WH Gloss White
1170M1 Gloss White
Basic White Reflector ✰
Cratere Dome Wet Location ✰✰✰
Opal Dome Wet Location ✰✰✰
Frame-In
Kit
Lamping
A19
BR40 PAR38 R40 Heat Lamp
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
A19
1102P1
1103R
100W 150W 150W
100W 150W 150W
1102P1
1103R
100W
100W
1102P1
1103R
75W
75W
Deep Specular ✰✰✰
BR40 PAR38
Reflector
1103R ✰✰
Designed for existing construction where insulation will
not be installed. Pre-installed mounting straps secure
flanged ring without tools and without damaging plaster
or gypsum ceilings up to 2" thick. Junction box allows
direct “daisy-chain” wiring to other fixtures. Tool-free
cable clamps allow fast, convenient installation for nonmetallic (Romex® ) cable.
Shallow Specular ✰✰✰
Frame-In
Kit
Lamping
A19 A21
1102P1
1103R
100W 150W 85W
100W 150W 85W
BR30
Reflector
1145
Specular Gold
1146
Specular Clear
1146CD Clear Diffuse
Brushed Gold
Brushed Clear
Specular Gold
Specular Clear
Specular Black
Clear Diffuse
Matte White
Step Baffle ✰✰
Cross Blade ✰✰
Reflector
1171
Reflector
Gloss White
1102P1
1103R
100W 150W 150W 150W
100W 150W 150W 150W
BR40 PAR38
Frame-In
Kit
Lamping
A19 PAR38
1102P1
1103R
100W 150W
100W 150W
Reflector
Reflector
1105†
Matte Black
1105WH Matte White
1105BNM Natural Metal Flange/Baffle
1132
†Add NM to catalog number for Natural Metal flange.
Accepts Lytegems. See page 88.
Reflector
Cratere Glass
1134
Opal Glass
Fresnel Lenslite Wet Location ✰✰✰
White Diffuser Wet Location ✰✰
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
A19
1102P1
1103R
100W
100W
1102P1
1103R
100W
100W
1102P1
1103R
100W
100W
1121
Lamping
A19 A21
1124
Opal Disk Wet Location ✰✰✰
Reflector
Frame-In
Kit
250W
250W
Reflector
Opal Glass
1126
Reflector
Fresnel Lens
1128
White Diffuser
White
†Add NM to catalog number for Natural Metal flange.
L y t e c a s t e r
69
6 3/4" Incandescent Non-Insulated Ceilings (continued)
1102P1 ✰✰
Designed for new construction where insulation will not
be installed. This steel frame will accommodate ceilings
up to 1" thick. Steel mounting bars will extend from 13"
to 27". Integral wood joist nailing tabs, Integral cable
clamps for nonmetallic (Romex® ) or armored (BX® )
cable, mounting bars lock to T-bar ceiling runners without accessories, UL listed for through wiring.
6 3/4" Incandescent Non-Insulated Ceilings (continued)
Opalex Dropped Wet Location ✰✰
Lensed Wet Location ✰✰✰
Recessed Adjustable ✰✰
Recessed Adjustable ✰✰
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
PAR 38
Frame-In
Kit
Lamping
BR30
PAR38
Frame-In
Kit
Lamping
BR30
PAR38
BR40
Frame-In
Kit
Lamping
PAR30
BR30
1102P1
1103R
75W
75W
1102P1
1103R
120W
120W
1102P1
1103R
85W
85W
1102P1
1103R
85W
85W
150W
150W
150W
150W
1102P1
1103R 75W Long Neck
75W Long Neck
85W
85W
Reflector
1178SH
Reflector
1190
Lexan
Etch White
Open Wet Location ✰
Opalex Flush Wet Location ✰
Frame-In
Kit
Lamping
PAR38
Frame-In
Kit
Lamping
A19
1102P1
1103R
75W**
75W**
1102P1
1103R
75W
75W
90W
90W
Reflector
Reflector
1129†
Matte Black Baffle
1129WH Matte White Baffle
1129BK† Specular Black
1129CL† Specular Clear
1129GD† Specular Gold
1129CD† Clear Diffuse
1129BNM Natural Baffle, Natural Flange
1127†
1127WH
1127BK†
1138†
1127CD†
1148†
1127BNM
Step Baffle Eyeball ✰✰
Reflector
Matte Black Baffle
Matte White Baffle
Specular Black
Specular Gold
Clear Diffuse
Specular Clear
Natural Metal Flange/Baffle
1122
Eyeball w/Black Baffle
1122WH Eyeball w/White Baffle
Basic Eyeball ✰
1103R ✰✰
Designed for existing construction where insulation will
not be installed. Pre-installed mounting straps secure
flanged ring without tools and without damaging plaster
or gypsum ceilings up to 2" thick. Junction box allows
direct “daisy-chain” wiring to other fixtures. Tool-free
cable clamps allow fast, convenient installation, for nonmetallic (Romex® ) cable.
Cut Out
Width
Length
Depth
1102P1
1103R
6 13/16"
7"
9"
7 3/8"
11 1/8"
14 9/16"
see reflector trim
Reflector
Reflector
1184WH Gloss White
1184CD Clear Diffuse
1177SH
Lexan
**Requires outdoor rated PAR38 GE or Sylvania lamp
Step Baffle Wall Washer ✰✰
Lamping
A19
A21
BR40
Frame-In
Kit
Lamping
A19
1102P1
1103R
100W
100W
150W
150W
90W
90W
1102P1
1103R
100W
100W
Reflector
Reflector
1135 Matte Black Step Baffle
1135WH Matte White Step Baffle
1185 Lamping
PAR30
1102P1
1103R
75W Long Neck 85W
75W Long Neck 85W
BR30
Reflector
Basic Wall Washer ✰
Frame-In
Kit
Frame-In
Kit
1182
Basic White Eyeball
Gloss White
Open Downlight Wall Washer ✰✰✰
150W
A21
Lamping
A19
A21
1102P1
100W
150W (135W)
( ) = Wattage for 1195
Distance from Ceiling
Frame-In
Kit
1'
2'
3'
4'
5'
6'
7'
8'
9'
Footcandles with Units 2 Feet from Wall
2'
41
60
53
40
30
23
17
14
11
39
60
54
41
30
23
18
14
11
3'
41
60
53
40
30
23
17
14
11
32
44
33
26
20
16
13
10
9
22
35
30
29
21
16
13
10
9
32
44
33
26
20
16
13
10
9
Eyelid wall washers blend easily into the ceiling with
open downlights and provide smooth scallop-free
lighting on vertical surfaces.
Reflector
1195
Specular Gold
1196
Specular Clear
1196CD Clear Diffuse
Available for 1102P1 only
†Add NM to catalog number for Natural Metal flange.
70
Accepts Lytegems. See page 88.
†Add NM to catalog number for Natural Metal flange.
L y t e c a s t e r
71
7 1/2" Incandescent Non-Insulated Ceilings
7 1/2" Incandescent Non-Insulated Ceilings
Performance PAR Recessed Adjustable
✰✰
✰
1700P1
Designed for new construction where insulation will
not be installed. Performance PAR Non-IC is specifically designed for use with Performance PAR Recessed
Adjustable reflector trims. Accommodates ceilings up to
1" thick. Integral wood joist nailing tabs, Integral cable
clamps for nonmetallic (Romex® ) or armored (BX® )
cable, UL listed for through wiring, mounting bars lock to
T-bar ceiling runners without accessories.
Cut Out
Width
Length
Depth
Frame-In
Kit
Lamping
PAR38
1700P1
150W
Reflector
1738CL Specular Clear
1738GD Specular Gold
1700P1
7 7/8"
10 7/8"
15 1/2"
9 3/4"
Performance PAR
Recessed Adjustable
Adjustment yoke
(35° tilt)
Lytecaster’s unmatched selection and performance make it well suited for demanding light commercial applications.
Interior cut-off shield
prevents view into
fixture from below.
Deeply recessed
lamp for
superior glare control.
Accent Lighting provides dramatic interest in a space by
drawing attention to selected objects and surfaces. It
is typically achieved with adjustable downlights whose
beams can be carefully aimed.
72
L y t e c a s t e r
73
6 3/4" Incandescent Insulated Ceilings
6 3/4" Incandescent Insulated Ceilings
Specular Cone ✰✰✰
1100IC / 1100AICM ✰✰
IC housings designed to offer a full range of lighting
performance in fully insulated ceiling applications up to
1" thick. Accepts a wide variety of reflector trims and
lamps to 100W. Fully gasketed AirSeal IC housings minimize air leakage for compliance with WSEC and MEC
restricted airflow requirements. On AICM, Housings
accept the same reflector trims and lamping options as
Standard IC FIK’s.
Aperture Cone ✰✰
Frame-In
Kit
Lamping
A19
BR30
PAR38
1100DAICM
1100DICM
100W
100W
100W
100W
85W
85W
Reflector
1145
Specular Gold
1146
Specular Clear
1146CD Clear Diffuse
Available for 1100DICM / 1100DAICM only
1100DICM / 1100DAICM ✰✰✰
IC housings designed to offer a full range of lighting performance in fully insulated ceiling applications up to 1"
thick. Installed appearance of Deep IC precisely matches
Lytecaster Non-IC Frame-In Kits. Fully gasketed AirSeal
IC housings minimize air leakage for compliance with
MEC and WSEC.
1104ICX ✰✰
IC housing designed to offer a full range of lighting performance in fully insulated ceiling applications up to 1"
thick. Accepts a wide choice of reflector trims and lamps
to 100W. AirSeal® complies with MEC and WSEC air
leakage requirements. Pivoting bar-ends, pre-installed
mounting screws (or nails), and tool-free cable clamps
for fast, convenient installation.
1104ICXN = Preset Nails
1104ICXNQ= Preset Nails / Quick Connects
For above frames: Lamp position is 3/4" lower than in
standard Non-IC FIK’s.
Above frames provide: Integral wood joist nailing tabs, UL listed for through wiring, for nonmetallic
(Romex® ) cable, mounting bars lock to T-bar ceiling runners without accessories.
Cut Out
Width
Length
Depth
1100DICM
1100DAICM
6 13/16"
9"
15 1/2"
9 1/4"
1104ICX
6 15/16"
10 3/8"
12 1/4"
7 1/4"
Basic White Reflector ✰
Basic White Reflector ✰
Frame-In
Kit
Lamping
A19
BR40
PAR38
Frame-In
Kit
Lamping
BR30 PAR30
Frame-In
Kit
Lamping
BR30 PAR30
Frame-In
Kit
Lamping
A19
BR40
PAR38
1104ICX
1100DAICM
1100DICM
1100IC
1100AICM
60W
75W
75W
75W
75W
100W(90W)
90W
90W
90W
90W
1104ICX
1100DAICM
1100DICM
1100IC
1100AICM
85W
85W
85W
85W
85W
1104ICX
1100DAICM
1100DICM
1100IC
1100AICM
85W
85W
85W
85W
85W
1104ICX
1100DAICM
1100DICM
1100IC
1100AICM
60W
60W
60W
60W
60W
100W
90W
90W
90W
90W
120W(100W)
100W
100W
100W
100W
75W
75W Long Neck
75W Long Neck
75W
75W
120W
100W
100W
100W
100W
Reflector
Reflector
Reflector
Reflector
1179M1 Black
1179WH White
1170M1 Gloss White
1171
Cratere Dome Wet Location ✰✰✰
Opal Dome Wet Location ✰✰✰
Opal Disk Wet Location ✰
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
A19
1104ICX
1100DAICM
1100DICM
1100IC
1100AICM
60W
60W
60W
60W
60W
1104ICX
1100DAICM
1100DICM
1100IC
1100AICM
40W
40W
40W
40W
40W
1104ICX
1100DAICM
1100DICM
1100IC
1100AICM
52W
60W
60W
60W
60W
1113†
1113BK†
1113CD†
1113WH
Specular Clear
Specular Black
Clear Diffuse
Matte White
Gloss White
Shallow Specular ✰✰✰
Frame-In
Kit
Lamping
A19
BR40
PAR38
Frame-In
Kit
Lamping
A19
1104ICX
1100DAICM
1100DICM
1100IC
1100AICM
60W
60W
60W
60W
60W
90W
100W
100W
100W
100W
1104ICX
1100DAICM
1100DICM
1100IC
1100AICM
100W
100W
100W
100W
100W
100W
100W
100W
100W
100W
Reflector
Reflector
1105†
Matte Black
1105WH Matte White
1105BNM Natural Metal Flange/Baffle
1143
Specular Gold
1144
Specular Clear
1144CD Clear Diffuse
Cross Blade ✰✰
Basic Baffle ✰
Reflector
1124
1121
Opal Glass
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
A19
1104ICX
1100DAICM
1100DICM
1100IC
1100AICM
52W
60W
60W
60W
60W
1104ICX
1100DAICM
1100DICM
1100IC
1100AICM
52W
60W
60W
60W
60W
1104ICX
1100DAICM
1100DICM
1100IC
1100AICM
40W
40W
40W
40W
40W
Frame-In
Kit
Lamping
A19
BR40
PAR38
Reflector
1104ICX
1100DAICM
1100DICM
1100IC
1100AICM
52W
60W
60W
60W
60W
-
90W
90W
-
1104ICX
1100DAICM
1100DICM
1100IC
1100AICM
52W
40W
40W
40W
40W
90W
90W
90W
90W
90W
1126
Reflector
Reflector
Opal Glass
Opalex Dropped Wet Location ✰✰
PAR38
90W
100W
100W
100W
100W
1134
White Diffuser Wet Location ✰✰
Lamping
A19
PAR30
75W
-
-
75W
75W
Reflector
Cratere Glass
Fresnel Lenslite Wet Location ✰✰
Frame-In
Kit
1132
75W
75W Long Neck
75W Long Neck
75W
75W
( ) = Wattage for 1113 BK, all other wattages apply.
1108† Brushed Gold
1110† Brushed Clear
1112† Specular Gold
Step Baffle ✰✰
Basic Baffle ✰
Reflector
1128
Fresnel Lens
Reflector
White Diffuser
1178SH
Lexan
Lensed Wet Location ✰✰✰
Opalex Flush Wet Location ✰
Open Wet Location ✰
Frame-In
Kit
Lamping
PAR 38
Frame-In
Kit
Lamping
A19
Frame-In
Kit
Lamping
PAR38
1100IC/1100AICM
1100DICM/1100DAICM
1104ICX
90W
75W
60W
1100DAICM
1100DICM
1100IC
1100AICM
40W
40W
40W
40W
1100IC
1100AICM
1104ICX
75W**
75W**
75W**
Reflector
White
1176
Black
1176WH White
1100IC
1100AICM
6 13/16"
9"
15 1/2"
7 5/16"
Reflector
1190
Etch White
Reflector
1177SH
Lexan
Not available for the 1104ICX
Reflector
1184WH Gloss White
1184CD Clear Diffuse
Available for the 1104IC, 1100AICM, and 1104ICX only.
**Requires outdoor rated PAR38 GE or Sylvania lamp
74
Accepts Lytegems. See page 88.
†Add NM to catalog number for Natural Metal flange.
†Add NM to catalog number for Natural Metal flange.
L y t e c a s t e r
75
6 3/4" Incandescent Insulated Ceilings (continued)
6 3/4" Incandescent Insulated Ceilings (continued)
Open Downlight Wall Washer ✰✰✰
150W
A21
Frame-In
Kit
Lamping
A19
1100DAICM
75W
Distance from Ceiling
1100IC / 1100AICM ✰✰
IC housings designed to offer a full range of lighting
performance in fully insulated ceiling applications up to
1" thick. Accepts a wide variety of reflector trims and
lamps to 100W. Fully gasketed AirSeal IC housings minimize air leakage for compliance with WSEC and MEC
restricted airflow requirements. On AICM, Housings
accept the same reflector trims and lamping options as
Standard IC FIK’s.
Reflector
1195
Specular Gold
1196
Specular Clear
1196CD Clear Diffuse
1'
2'
3'
4'
5'
6'
7'
8'
9'
Shallow Slope: 14°(3/12)–30°(7/12)
✰
✰
Steep Slope: 30°(7/12)–45°(12/12)
✰
✰
Frame-In
Kit
Reflector
PAR38 Lamping
1100IC
1100AICM 1104ICX
Frame-In
Kit
Lamping
BR30 PAR30
Frame-In
Kit
Lamping
PAR30
1154
1154WH
1154BK
1154CD
1154CL
1154GD
1154MW
1154GWB
1154GWC
90W
90W
106W
120W
120W
120W
106W
90W
90W
1104ICX
1100IC
1100AICM
85W
65W
65W
1104ICX
1100IC
1100AICM
75W
75W Long Neck
75W Long Neck
Footcandles with Units 2 Feet from Wall
2'
41
60
53
40
30
23
17
14
11
39
60
54
41
30
23
18
14
11
3'
41
60
53
40
30
23
17
14
11
32
44
33
26
20
16
13
10
9
22
35
30
29
21
16
13
10
9
32
44
33
26
20
16
13
10
9
Available for 1100DAICM only
Step Baffle Wall Washer ✰✰
Complete Slope: 14°(3/12)–45°(12/12)
✰✰
✰
Basic Wall Washer ✰
Black Step Baffle
White Step Baffle
Specular Black
Clear Diffuse
Specular Clear
Specular Gold
Matte White Cone
Gloss White Baffle
Gloss White Cone
Available for 1100IC/1100AICM/1104ICX only
1100DICM / 1100DAICM ✰✰✰
IC housings designed to offer a full range of lighting performance in fully insulated ceiling applications up to 1"
thick. Installed appearance of Deep IC precisely matches
Lytecaster Non-IC Frame-In Kits. Fully gasketed AirSeal
IC housings minimize air leakage for compliance with
MEC and WSEC.
Frame-In
Kit
Lamping
A19
BR30
Frame-In
Kit
Lamping
A19
1100DAICM
1100DICM
60W
60W
1100IC
1100AICM
1100DICM
1100DAICM
1104ICX
52W
52W
40W
40W
52W
60W
60W
Reflector
1135 Matte Black Step Baffle
1135WH Matte White Step Baffle
Available for 1100DICM/1100DAICM only
Step Baffle Eyeball ✰✰
1104ICX ✰✰
IC housing designed to offer a full range of lighting performance in fully insulated ceiling applications up to 1"
thick. Accepts a wide choice of reflector trims and lamps
to 100W. AirSeal® complies with MEC and WSEC air
leakage requirements. Pivoting bar-ends, pre-installed
mounting screws (or nails), and tool-free cable clamps
for fast, convenient installation.
1104ICXN = Preset Nails
1104ICXNQ= Preset Nails / Quick Connects
Reflector
1185 Gloss White
90W
90W
90W
120W
106W
120W
106W
90W
90W
75W
75W
75W
Reflector
1131
1131WH
1131CL
1131GD
1131BK
Reflector
Black Step Baffle
Gloss White Step Baffle
Specular Clear
Specular Gold
Specular Black
Available for 1100IC/1100AICM/1104ICX only
Recessed Adjustable ✰✰
Recessed Adjustable ✰✰
Frame-In
Kit
Lamping
BR30 PAR38
Frame-In
Kit
Lamping
BR30 BR40
PAR38
1100DAICM
1100DICM
85W
85W
1104ICX
1100DAICM
1100DICM
1100IC
1100AICM
65W
85W
85W
85W
85W
90W
90W
90W
90W
90W
1127†
1127WH
1127BK†
1138†
1127CD†
1148†
1127BNM
90W
90W
Matte Black Baffle
Matte White Baffle
Specular Black
Specular Gold
Clear Diffuse
Specular Clear
Natural Metal Flange/Baffle
Available for 1100DICM/1100DAICM only
Frame-In
Kit
Lamping
PAR30
BR30
Frame-In
Kit
Lamping
PAR30
BR30
1100IC
1100AICM
1104ICX
1100DAICM
1100DICM
75W Long Neck
75W Long Neck
75W Long Neck
75W Long Neck
75W Long Neck
85W
85W
85W
85W
85W
1100IC
1100AICM
1104ICX
1100DAICM
1100DICM
75W Long Neck
75W Long Neck
75W Long Neck
75W Long Neck
75W Long Neck
85W
85W
85W
85W
85W
Reflector
Reflector
1122
Eyeball w/Black Baffle
1122WH Eyeball w/White Baffle
1182
Black Step Baffle
Gloss White Step Baffle
Specular Clear
Specular Gold
Specular Black
Available for 1100IC/1100AICM/1104ICX only
Reflector
Basic Eyeball ✰
1133
1133WH
1133CL
1133GD
1133BK
90W
-
-
-
-
Reflector
1129†
Matte Black Baffle
1129WH Matte White Baffle
1129BK† Specular Black
1129CL† Specular Clear
1129GD† Specular Gold
1129BNM Natural Metal Flange/Baffle
Basic White Eyeball
For above frames: Lamp position is 3/4" lower than in
standard Non-IC FIK’s.
Above frames provide: Integral wood joist nailing tabs, UL listed for through wiring, for nonmetallic
(Romex® ) cable, mounting bars lock to T-bar ceiling runners without accessories.
Cut Out
Width
Length
Depth
1100DICM
1100DAICM
6 13/16"
9"
15 1/2"
9 1/4"
1104ICX
6 15/16"
10 3/8"
12 1/4"
7 1/4"
1100IC
1100AICM
6 13/16"
9"
15 1/2"
7 5/16"
†Add NM to catalog number for Natural Metal flange.
76
†Add NM to catalog number for Natural Metal flange.
L y t e c a s t e r
77
0 6 3/4" Incandescent Convertible Insulated/Non-Insulated Ceilings
Shallow Specular ✰✰✰
1104IC ✰
Convertible IC/Non-IC for new construction ceilings up
to 3" thick. AirSeal®, complies with MEC and WSEC
air leakage requirements when installed as instructed.
Pivoting bar-ends, pre-installed mounting screws, and
tool-free cable clamps for fast, convenient installation.
Mounting bars lock to T-bar ceiling runners without
accessories, UL listed for through wiring.
0 6 3/4" Incandescent Convertible Insulated/Non-Insulated Ceilings
Step Baffle ✰✰
Cratere Dome Wet Location ✰✰✰
Opal Dome Wet Location ✰✰✰
Fresnel Lenslite Wet Location ✰✰✰
Frame-In Lamping IC
Kit
A19 BR30 PAR30
Lamping Non-IC
A19 BR30 PAR30
Frame-InLamping IC
Lamping Non-IC
Kit
A19 BR30BR40PAR38A19 BR30BR40PAR38
Frame-In
Kit
Lamping IC
A19
Lamping Non-IC
A19
Frame-In
Kit
Lamping IC
A19
Lamping Non-IC
A19
Frame-In
Kit
Lamping IC
A19
Lamping Non-IC
A19
1104IC
1104ICR
100W 85W
100W 85W
1104IC 40W75W 65W 75W 75W 85W 120W90W
1104ICR 40W75W 65W 75W 75W 85W 120W90W
1104IC
1104ICR
40W
40W
75W
75W
1104IC
1104ICR
N/A
N/A
60W
60W
1104IC
1104ICR
N/A
N/A
60W
60W
Reflector
Reflector
Reflector
1143
Specular Gold
1144
Specular Clear
1144CD Clear Diffuse
1105†
Matte Black
1105WH Matte White
1105BNM Natural Metal Flange/Baffle
1124
Cross Blade ✰✰
Aperture Cone ✰✰
75W 85W 75W
75W 85W 75W
75W
75W
Reflector
1134
Cratere Glass
Reflector
1126
Opal Glass
Fresnel Lens
White Diffuser Wet Location ✰✰
Opalex Dropped Wet Location ✰✰
Opal Disk Wet Location ✰✰✰
Frame-In
Kit
Lamping IC
A19
Lamping Non-IC
A19
Frame-In
Kit
Lamping IC
A19
Lamping Non-IC
A19
Frame-In
Kit
Lamping IC
A19
Lamping Non-IC
A19
1104IC
1104ICR
N/A
N/A
60W
60W
1104IC
1104ICR
N/A
N/A
40W
40W
1104IC
1104ICR
40W
40W
75W
75W
1104ICQ = Quick Connects
1104ICN = Preset Nails
1104ICNQ = Preset Nails / Quick Connects
Frame-In Lamping IC
Kit
A19 PAR30
Lamping Non-IC
A19 PAR30
Frame-InLamping IC
Kit
A19 BR40 PAR38
Lamping Non-IC
A19 BR40 PAR38
1104IC
1104ICR
60W 75W
60W 75W
1104IC 60W 65W 75W
1104ICR 60W 65W 75W
100W 150W
100W 150W
40W 50W
40W 50W
Reflector
Reflector
1132
1104ICR ✰
Remodeler may be used in existing insulated or noninsulated ceilings up to 2" thick. Junction box on flex
for easier mounting in restricted applications. AirSeal®
ready, complies with MEC and WSEC air leakage
requirements when installed as instructed. Integral cable
clamps for nonmetallic (Romex® ) cable.
1104IC
1104ICR
Cut Out
7"
7"
Width
7 5/16"
7 5/16"
Length
10 3/4"
13 1/8"
Depth
7 1/2"
7 1/2"
Note: 1104IC, 1104ICR.
Lamp position is 3/4" lower than in standard Non-IC FIK’s.
100W
100W
1108†
1110†
1112†
1113†
1113BK†
1113CD†
1113WH
White
Basic Baffle ✰
Brushed Gold
Brushed Clear
Specular Gold
Specular Clear
Specular Black
Clear Diffuse
Matte White
Reflector
1128
Reflector
6 3/4", 5" Basic Dropped
Wet Location ✰
1121
6 3/4", 5" Basic Flush
Wet Location ✰
Lamping IC
A19
Lamping Non-IC
A19
Frame-In
Kit
Lamping IC
A19
Lamping Non-IC
A19
1104IC
1104ICR
40W
40W
52W
52W
1104IC
1104ICR
40W
40W
75W
75W
Reflector
Frame-In Lamping IC
Kit
A19 BR40 BR30
Lamping Non-IC
A19 BR30 BR40 PAR38
Frame-In Lamping IC
Kit
BR30 PAR30
Lamping Non-IC
BR30 PAR30
1178LX
1104IC 40W 65W 65W
1104ICR 40W 65W 65W
60W 85W 120W 90W
60W 85W 120W 90W
1104IC
1104ICR
85W
85W
Lensed Wet Location ✰
75W
75W
85W
85W
Reflector
Reflector
1176
Black
1176WH White
1179M1 Black Baffle
1179WH Gloss White
Basic White Reflector ✰
Basic White Reflector ✰
75W
75W
Lamping Non-IC
BR30 PAR30
Frame-In Lamping IC
Kit
A19 BR40 PAR38
Lamping Non-IC
A19 BR40 PAR38
1104IC
1104ICR
85W 75W
85W 75W
1104IC
1104ICR
75W 120W 150W
75W 120W 150W
52W 85W 75W
52W 85W 75W
Reflector
Reflector
1170M1 Gloss White
1171
†Add NM to catalog number for Natural Metal flange.
Accepts Lytegems. See page 88.
Frame-In
Kit
Lamping IC
A19
Lamping Non-IC
A19
1104IC
1104ICR
N/A
N/A
40W
40W
Reflector
1177SH
Lexan
Glass
Open Wet Location ✰
Frame-In
Kit
Lamping IC
PAR38
Lamping Non-IC
PAR38
Frame-In
Kit
Lamping IC
PAR38
Lamping Non-IC
PAR38
1104IC
1104ICR
45W
45W
100W
100W
1104IC
1104ICR
75W**
75W**
75W**
75W**
1190
Frame-In Lamping IC
Kit
BR30PAR30
1177LX
Lexan
Opal Glass
Opalex Flush Wet Location ✰
Frame-In
Kit
Reflector
85W 75W
85W 75W
Reflector
Lexan
Basic Baffle ✰
Reflector
78
1178SH
White Diffuser
Reflector
Etch White
1181WH Gloss White
1181CD Clear Diffuse
**Requires outdoor rated PAR38 GE or Sylvania lamp
Gloss White
†Add NM to catalog number for Natural Metal flange.
L y t e c a s t e r
79
0 6 3/4" Incandescent Convertible Insulated/Non-Insulated Ceilings (con’t)
Basic Eyeball ✰
1104IC ✰
Convertible IC/Non-IC for new construction ceilings up
to 3" thick. AirSeal®, complies with MEC and WSEC
air leakage requirements when installed as instructed.
Pivoting bar-ends, pre-installed mounting screws, and
tool-free cable clamps for fast, convenient installation.
Mounting bars lock to T-bar ceiling runners without
accessories, UL listed for through wiring.
Basic Wall Washer ✰
6 3/4", 5" Basic Flush Wet Location ✰
Frame-In
Kit
Lamping IC
A19
Lamping Non-IC
A19
40W
40W
75W
75W
Lamping IC
BR30 PAR30
Lamping Non-IC
BR30 PAR30
Frame-In
Kit
Lamping IC
A19
Lamping Non-IC
A19
Frame-In Lamping IC
Kit
BR30 PAR30
1104IC
1104ICR
85W 75W 85W 75W 85W 75W
85W 75W
1104IC
1104ICR
40W
40W
60W
60W
1104SIC 65W 75W Long Neck 85W 75W Long Neck
1104SICR 65W 75W Long Neck 85W 75W Long Neck
1104SIC
1104SICR
Reflector
Reflector
Reflector
1182
Reflector
1185 Basic White Eyeball
Gloss White
B16
B17
B17WH
Lamping Non-IC
BR30 PAR30
1177LX
White Splay
Black Baffle
White Baffle
6 3/4", 5" Basic Dropped
Wet Location ✰
Frame-In
Kit
Lamping IC
A19
Lamping Non-IC
A19
1104SIC
1104SICR
40W
40W
52W
52W
Glass
1104SIC ✰
Shallow new construction IC/Non-IC housing for use in
2" x 6" joist construction. Pivoting bar-ends, tool-free
cable clamps for nonmetallic (Romex® ) cable and preinstalled mounting screws are standard. AirSeal, complies
with MEC and WSEC air leakage requirements when
installed as instructed. UL listed for through ­wiring,
mounting bars lock to T-bar ceiling runners ­without
accessories.
1104SICN = Preset Nails
Reflector
1104ICR ✰
Remodeler may be used in existing insulated or noninsulated ceilings up to 2" thick. Junction box on flex
for easier mounting in restricted applications. AirSeal®
ready, complies with MEC and WSEC air leakage
requirements when installed as instructed. Integral cable
clamps for nonmetallic (Romex® ) cable.
1178LX
Lexan
1104SICR ✰
Shallow remodeler IC/Non-IC housing for use in
2" x 6" joist construction. Junction box on flex for
restricted applications. AirSeal ready, complies with
MEC and WSEC air leakage requirements when
installed as instructed.
1104IC
1104ICR
Cut Out
7"
7"
Width
7 5/16"
7 5/16"
Length
10 3/4"
13 1/8"
Depth
7 1/2"
7 1/2"
Note: 1104IC, 1104ICR.
Lamp position is 3/4" lower than in standard Non-IC FIK’s.
80
Shallow Plenum Baffle ✰
Frame-In
Kit
1104ICQ = Quick Connects
1104ICN = Preset Nails
1104ICNQ = Preset Nails / Quick Connects
Lyte\ning
Lightolier’s new Lyte\ning Convertible IC/Non-IC
Frame-in Kits are specifically designed for quick,
convenient installation in residential applications,
offering good performance and value.
• Lytening convertible housings may be used in both
insulated and non-insulated ceilings.
• Accommodate a wide selection of the most
commonly specified Lytecaster Reflector Trims.
• Pivoting bar ends allow convenient wiring below the
ceiling and fast installation.
• Shallow design allows installations in limited
plenums.
0 6 3/4" Shallow Incandescent Convertible Insulated/Non-Insulated Ceilings
Cut Out (A)
Width (W)
Length (L)
1104SIC
6 13/16"
7 5/16"
10 3/4"
1104SICR
6 13/16"
7 5/16"
13 1/8"
Depth (D)
5 1/2"
5 1/2"
Screw-in
Quick-connect
Swing-up
L y t e c a s t e r
81
6 3/4" Low Voltage Non-Insulated Ceilings
1102P1 ✰✰
Designed for new construction where insulation will not
be installed. This steel frame will accommodate ceilings
up to 1" thick. Steel mounting bars will extend from 13"
to 27". Integral wood joist nailing tabs, Integral cable
clamps for nonmetallic (Romex® ) or armored (BX® )
cable, mounting bars lock to T-bar ceiling runners without accessories, UL listed for through wiring.
6 3/4" Low Voltage Insulated Ceilings
Recessed Adjustable ✰✰
Recessed Adjustable ✰✰
PAR36 Recessed Adjustable ✰✰
Frame-In
Kit
Lamping
MR16
Frame-In
Kit
Lamping
MR16
Frame-In
Kit
Lamping
12v PAR36
5.5v PAR36
1102P1
1103R
42-50W
42-50W
1104ICX
1100DAICM
1100DICM
1100IC
1100AIC
42-50W
42-50W
42-50W
42-50W
42-50W
1104ICX
1100DAICM
1100DICM
1100IC
25-50W
25-50W
25-50W
25-50W
25W
25W
25W
25W
Accent Lighting
• Larger size 6 3/4" fixtures provide the most adjustment and higher wattages.
Reflector
1161
Matte Black Baffle
1161WH Matte White Baffle
Magnetic transformer built into reflector
Pinhole ✰✰
• 6 3/4" PAR36 Recessed Adjustable features
a dual output transformer for 12v or 5.5v lamps.
PAR36 fixtures are particularly well-suited for
accenting small objects with long throws of light.
Reflector
1161
Matte Black Baffle
1161WH Matte White Baffle
Magnetic transformer built into reflector
Reflector
1155 1155WH 1163 1164 Matte Black Baffle
Matte White Baffle
Specular Gold
Specular Clear
Magnetic transformer built into reflector
1100IC / 1100AICM ✰✰
IC housings designed to offer a full range of lighting
performance in fully insulated ceiling applications up to
1" thick. Fully gasketed AirSeal IC housings minimize air
leakage for compliance with WSEC and MEC restricted
airflow requirements. On AICM, Housings accept the
same reflector trims and lamping options as Standard
IC FIK’s.
Pinhole ✰✰
Frame-In
Kit
Lamping
MR16
1102P1
1103R
42-75W
42-75W
Reflector
1103R ✰✰
Designed for existing construction where insulation will
not be installed. Pre-installed mounting straps secure
flanged ring without tools and without damaging plaster
or gypsum ceilings up to 2" thick. Junction box allows
direct “daisy-chain” wiring to other fixtures. Tool-free
cable clamps allow fast, convenient installation for nonmetallic (Romex® ) cable.
Cut Out
Width
Length
Depth
1102P1
1103R
6 13/16"
7"
9"
7 3/8"
11 1/8"
14 9/16"
see reflector trim
1152 Pinhole w/Matte White Faceplate
Magnetic transformer built into reflector
PAR36 Recessed Adjustable ✰✰
Frame-In
Kit
Lamping
MR16
1100DAICM
1100DICM
35W
35W
Reflector
1152 Pinhole w/Matte
White Faceplate
Magnetic transformer built into reflector
1100DICM / 1100DAICM ✰✰✰
IC housings designed to offer a full range of lighting performance in fully insulated ceiling applications up to 1"
thick. Installed appearance of Deep IC precisely matches
Lytecaster Non-IC Frame-In Kits. Fully gasketed AirSeal
IC housings minimize air leakage for compliance with
MEC and WSEC.
Available for 1100DICM and 1100DAICM only
Frame-In
Kit
Lamping
12v PAR36
5.5v PAR36
1102P1
1103R
25-50W
25-50W
25W
25W
1104ICX ✰✰
IC housing designed to offer a full range of lighting
performance in fully insulated ceiling applications up
to 1" thick. AirSeal® complies with MEC and WSEC air
leakage requirements. Pivoting bar-ends, pre-installed
mounting screws (or nails), and tool-free cable clamps
for fast, convenient installation.
1104ICXN = Preset Nails
1104ICXNQ= Preset Nails / Quick Connects
Reflector
1155 1155WH 1163 1164 Matte Black Baffle
Matte White Baffle
Specular Gold
Specular Clear
Magnetic transformer built into reflector
Noise
There is some noise produced by low voltage systems both from the lamps themselves and from the
transformers, especially when dimmed. This noise can be audible depending on the lamp/transformer
combination, the level of background noise, the absorbency of the surrounding surfaces and the hearing of the
people in the space.
Whether the noise is objectionable depends largely on how critical the application is.
In general, non-dimmed, magnetic transformers will be audible to most observers in most applications.
PAR36 lamps, in general, emit a characteristic filament “buzz” or “sizzle” especially when dimmed. We do not
recommend their dimmed use in very quiet environments.
Above frames provide: Integral wood joist nailing tabs, UL listed for through wiring, for nonmetallic
(Romex® ) cable, mounting bars lock to T-bar ceiling runners without accessories.
Cut Out
Width
Length
Depth
1100DICM
1100DAICM
6 13/16"
9"
15 1/2"
9 1/4"
1104ICX
6 15/16"
10 3/8"
12 1/4"
7 1/4"
1100IC
1100AICM
6 13/16"
9"
15 1/2"
7 5/16"
Private homes, quiet specialty shops and galleries tend to be more sensitive to noise than department stores or
circulation spaces. Conference rooms, stores and quiet restaurants fall in between.
Where noise can be expected to be a user issue, special care should be taken to examine all design options
especially the choice of lighting, surface, and furnishing materials.
82
Accepts Lytegems. See page 88.
Accepts Lytegems. See page 88.
L y t e c a s t e r
83
6 3/4" High Intensity Discharge (HID) Non-Insulated Ceilings
HID
High Intensity Discharge (HID) light sources provide
high output, long life, and the greatest possible energy
efficiency. These characteristics make them a prime
consideration for many commercial applications.
Metal halide is best suited for interior applications as
it provides better color rendering than high pressure
sodium. HID downlights should be used for ceilings over
twelve feet where a strong punch of light is required. For
ceilings over 20 feet, consider metal halide PAR lamps,
which provide an even stronger throw of light.
Lytecaster HID downlights are the ideal choice where
energy conservation and low maintenance costs are
prime considerations. Metal Halide is the source of
choice for interior applications, due to its efficiency and
color rendering capabilities.
Standard Non-IC High Intensity Discharge ✰
1102HF
6 13/16"
13 3/4"
11 5/8"
see specification sheet
Deep Specular Reflector ✰✰✰
Deep Specular Reflector ✰✰✰
100W ED17 MH Single Unit
Lytecaster HID downlights consist of three
individual components: Frame-In Kit, Ballast
Assembly and Reflector Trim. Order each
separately.
• Convenient Frame and Ballast Assembly offer
exceptional flexibility.
• Lightweight frame construction simplifies installation.
• Heavier ballast can be selected later and easily
mounted after ceiling is closed in.
Cut Out
Width
Length
Depth
6 3/4" High Intensity Discharge (HID) Reflectors
Ht. to Floor 8'
10'
12'
Frame-In
Kit
Ballast
4'
6'
8'
Reflector
8'
10'
12'
8'
11'
13'
315
140
79
260
116
65
Frame-In
Kit
Ballast
Step Baffle ✰✰
100W ED17 MH Single Unit
Ht. to Floor 8'
10'
12'
Notes: Minimum Starting Temperatures for HID lamps is -20° F.
All HID ballasts are dual 120/277v. For Auxiliary Option,
Fusing, and Glass Guard, consult factory.
Frame-In
Kit
Ballast
Metal Halide Ballast Assemblies
1102HF
1102HF
1102HF
1102HF
Lamping
ED17
PAR38
MHM75 70W*
MHM100 100W*
MPM70
-
MPM100 -
-
70W
100W
Reflector
1113HR
Specular Clear
Footcandles
Lrg. Room Sml. Room
4'
6'
8'
315
140
79
260
116
65
100W PAR38 MH Single Unit
Ht. to Floor 8'
10'
12'
F.C. Beam Dia.
at 30" above floor
190
102
64
7'
9'
11'
Multiple Units /S.R. =0.9
Footcandles
Lrg. Room Sml. Room
Ctr. to Ctr. 4'
6'
8'
354
157
88
Ht. to Floor 8'
11'
13'
Multiple Units /S.R. =1.1
Ctr. to Ctr. 294
131
74
336
149
84
287
128
72
100W ED17 MH Single Unit
F.C. Beam Dia.
at 30" above floor
107
58
36
5'
7'
8'
Footcandles
Lrg. Room Sml. Room
4'
6'
8'
Reflector
Deep Specular Cone ✰✰✰
F.C. Beam Dia.
at 30" above floor
275
148
92
Ctr. to Ctr. 1102HF MPM70 70W
1102HF MPM100 100W
1149HR Specular Black
1151HR Specular Clear
Multiple Units /S.R. =0.5
Lamping
PAR38
1146HR Specular Clear
cable clamps for nonmetallic (Romex® ) or armored
(BX® ) cable, UL listed for through wiring, mounting bars
lock to T-bar ceiling runners without accessories, installs
in ceilings up to 1" thick.
Ballast Assembly/Splice Box
• 120/277v Dual-tap ballast. Integral splice box
permits simple replacement.
• Quick Connector provides plug-in wiring and snap-on
attachment.
• Heavy gauge steel ballast plate for effective heat
dissipation.
120
64
40
Footcandles
Lrg. Room Sml. Room
Ctr. to Ctr. 1102HF MHM75 70W*
1102HF MHM100 100W*
Frame-In Kit: Integral wood joist nailing tabs, Integral
Ht. to Floor Multiple Units /S.R. =1.0
Lamping
ED17
100W PAR38 MH Single Unit
F.C. Beam Dia.
at 30" above floor
Frame-In
Kit
Ballast
1102HF
1102HF
1102HF
1102HF
Lamping
ED17
PAR38
MHM75 70W*
MHM100 100W*
MPM70
-
MPM100 -
Reflector
1105HR Matte Black
-
70W
100W
8'
10'
12'
F.C. Beam Dia.
at 30" above floor
106
57
36
7'
9'
11'
Multiple Units /S.R. =1.0
Footcandles
Lrg. Room Sml. Room
Ctr. to Ctr. 4'
6'
8'
230
102
57
190
84
48
100W PAR38 MH Single Unit
Ht. to Floor 8'
10'
12'
F.C. Beam Dia.
at 30" above floor
150
81
50
7'
9'
11'
Multiple Units /S.R. =1.0
Ctr. to Ctr. 4'
6'
8'
Footcandles
Lrg. Room Sml. Room
284
126
71
238
106
60
Fresnel Lenslite Wet Location ✰✰
Ballast Assemblies
Catalog Number
Wattage
MPM70
70W
PAR38
MPM100
100W
PAR38
MHM75 70W
ED17
MHM100
100W
ED17
70W ED17 MH Single Unit
Metal Halide Lamp
Notes: Minimum Starting Temperatures for metal halide lamps is -20°
F. All HID ballasts are dual 120/277v. Only uses open fixture
type metal halide lamps. For Auxiliary Option, Fusing, and Glass
Guard, consult factory.
Ht. to Floor 8'
10'
12'
Frame-In
Kit
Ballast
Lamping
ED17
PAR38
1102HF MHM75
70W*
Reflector
F.C. Beam Dia.
at 30" above floor
34
18
11
10'
14'
17'
Multiple Units /S.R. =1.4
Ctr. to Ctr. 4'
6'
8'
Footcandles
Lrg. Room Sml. Room
143
64
36
111
49
28
1126HR Fresnel Lens
*Use only Metal Halide lamps marked "Open Fixture Type." All other Metal Halide lamps are
not able to screw into special deep socket cup. Consult lamp manufacturers for selection and
availability.
84
Accepts Lytegems. See page 88.
L y t e c a s t e r
85
FireLine™ Fire Rated Enclosure
FireLine™ Fire Rated Enclosure
Product Compatibility
Unique Design
FireLine™
The following grid outlines the Lytecaster products compatible for use with the FIRELINE Fire Rated Enclosure.
Constructed of Albi DriClad®, this industry accepted material provides
a one-hour UL® classification for L500 series floor / ceiling assemblies.
The enclosure helps to prevent the spread of heat and flames into the
ceiling space, providing additional time for residents to evacuate. Unlike
other material used in fireproof products, FIRELINE is designed for
exposure to extreme temperatures and will provide consistent and longterm protection when exposed to the heat given off by lighting products.
Available in three sizes, FIRELINE is designed to fit the most popular
types of residential construction and is ideal for single and multi-family
dwellings, hospitality and assisted living environments.
FireLine
Use with Frame-In Kit
Catalog No
Lightolier presents the single most flexible and effective
solution for the fireproofing of recessed downlighting
applications. Designed with the distributor, contractor
and inspector in mind, FIRELINE provides a UL®
Classified enclosure that is easy to install, flexible and
cost effective in maintaining the one-hour fire rating
of L500 ceiling assemblies where recessed lighting is
used. Designed in cooperation with Albi Manufacturing®,
a 40 year leader in the fireproofing industry.
Compatible with all IC
Compatible with all trims
lamping options for the
rated for these Frame-In Kits
associated trims
1004IC
12FR2X10
Unsurpassed Flexibility
1004IC
Compatible with all IC
Compatible with all trims
lamping options for the
rated for these Frame-In Kits
associated trims
2000IC
Lytecaster has set the trend with the most extensive line
of recessed lighting in the industry. The FIRELINE fire
rated enclosure is no exception. Specifically designed
to work with the Lytecaster line of products, FIRELINE
works with over 30 existing Frame-In Kits and all their
compatible trims. This provides you with hundreds of
downlighting options for you and your customers. Why
Stock additional Frame-In Kit SKU’s or sacrifice style
and quality when you can use the recessed downlight
line you have come to know and trust... Lytecaster.
2000AIC
Incandescent
Compatible with all IC
Compatible with all trims
lamping options for the
rated for these Frame-In Kits
associated trims
1004IC
1104IC
Installation
This lightweight material weighs a fraction of what other fire resistant products
weigh. Simply lift FIRELINE into the joist space and use the mounting hardware
provided to install. Once in the ceiling, the Frame-In-Kit can be installed without any additional hardware or modifications.
16FR2X10
2000IC
1100IC
2000AIC
1100AICM
1000IC
1104ICX
1000AICM
1100P1
1004ICX
Fluorescent
Compatible with all lamping
Compatible with all trims
options for the associated
rated for these Frame-In Kits
trims
1102T13U
1102T18U
Restricted or obstructed ceiling space... FIRELINE is also available in a shallow
16" on center (16FR2X16) version for installation in plenums as shallow as
2x6 construction or where obstructions may cause height restrictions.
Winner of EC&M Magazine 2004 Product of the Year
Competition. FireLine was a winner in 2004 for their
introduction in the “Boxes & Enclosure” category of the
competition. FireLine was chosen from a record number
of entries and is now a finalist for the magazine’s 2004
Platinum Award.
Compatible with all lamping
Compatible with all trims
options for the associated
rated for these Frame-In Kits
trims
1100AICMFT 1104F Series
Designed specifically to fit in most standard types of construction, FIRELINE
provides more flexibility than any other fire rated product by offering a 16" on
center (16FR2X10) and 12" on center (12FR2X10) 2x10 construction.
We take pride in our relationship with the Underwriter
laboratories. FireLine™ was developed based on the
Classifications listed in the Fire Resistive Assemblies
and Systems portion of the UL Directory pertaining to
the test method and acceptance criteria in ANSI/UL
263 (ASTM E119 and NFPA 251), “Fire Tests of Building
Construction and Materials.”
1102T26U
Low Voltage
2000LVNT
1000ICV
2000AICV
Code
Lightolier FIRELINE, colored the familiar Lightolier red, serves as an
easy-to-recognize indicator for inspectors that you have installed a UL®
classified product that provides a one-hour fire rating and the knowledge
that it is the quality product they have come to know with Lightolier.
Additional information can be obtained from the UL label included on
the box or from the UL website under this UL Certification Fire Resistive
Assemblies and Systems page.
Lamping Options
Incandescent
...The First Line of Defense In Fire Rated Recessed
Lighting
Use with Reflector Trim
Compatible with all lamping
Compatible with all trims
options for the associated
rated for these Frame-In Kits
trims
Fluorescent
16FR2X6
1102T1
1102T13U
1102TH1
1102T18U
1102TH1
Compatible with all lamping
Compatible with all trims
options for the associated
rated for these Frame-In Kits
trims
Our UL listing (UL
File R21187) not only
ensures a quality
product for our customers but also provides
inspectors with the
security and convenience they need.
Value
FIRELINE saves time and money by eliminating the need to construct a separate fire rated enclosure.
•
•
•
86
Eliminates the need for additional contractors to build an enclosure.
Eliminates scheduling issues trying to coordinate contractors to build and install.
Eliminates the need for inspectors to inspect each individual box for compliance.
L y t e c a s t e r
87
Lytegems
Lytegems
Beveled Glass
1 7/8"
1 7/8"
8 5/8"
7 5/16"
A thick, double-tapered ring of glass floats ­elegantly off the
ceiling. Well suited for use in multiples. Choose from clear glass
that has been etched or striking solid cobalt blue.
Lytegems
The bold appearance of the Beveled Glass and
Glass Collar decorative accessories provide a strong
architectural statement. Used alone or in multiples these
clean modern designs add an elegant glow at the ceiling
line to create an intriguing visual focal point. Additionally
Lytecaster’s new Bed Molding Lytegems in round and
square styles helps to create a built in appearance that
will enhance classic architectural detail.
Finish
Clear Etched
Cobalt Blue
w/2000
1304
1305
w/1000
1404
1405
Glass Collar
5 5/16"
1 1/2"
6 11/16"
1 1/2"
2"
8 5/8"
Etched glass wraps around a black die-cast mounting collar
and glows softly. A simple design that works especially well in
multiples. Minimum extension from the ceiling and ­distortion of
the light beam.
Finish
Clear Etched
w/2000
1302
w/1000
1402
w/1100
1502
1. Frame-In Kit
2. Reflector Trim
3. Lytegem
Lytegems are compatible with those Reflector Trims
that have removable cones or baffles and with most
Lytecaster Frame-In Kits. All reflectors listed with
this symbol
can be used with Lytegems. The
Specular Clear and Satin Clear Cones will give the best
effect because they deliver the most light. Other finishes
may be used as desired.
Check specification sheet for compatible frames
and trims.
88
L y t e c a s t e r
89
Lytecaster Performance Product Photometrics
10
13
11
8
6
4
3
3
2
7
10
9
7
6
4
3
3
2
10
13
11
8
6
4
3
3
2
8
11
9
6
4
3
2
1
1
7
8
6
4
3
2
1
1
1
4
7
6
4
3
2
1
1
1
7
8
6
4
3
2
1
1
1
Ht. to Floor 32
17
11
8'
10'
12'
75
33
19
6'
8'
8'
11'
14'
61
27
16
54
29
18
8'
10'
12'
8'
11'
14'
Multiple Units /S.R. =1.1
Footcandles
Lrg. Room Sml. Room
Ctr. to Ctr. 4'
125
55
31
6'
8'
102
45
26
4'
6'
8'
Ht. to Floor 28
15
10
8'
10'
12'
9'
13'
16'
Footcandles
Lrg. Room Sml. Room
82
36
20
17
22
21
16
12
9
7
5
5
17
23
21
17
12
9
7
5
4
13
17
15
11
8
7
5
4
3
9
14
14
11
8
7
5
4
3
13
17
15
11
8
7
5
4
3
17
18
13
9
6
4
3
2
2
12
13
9
6
4
3
2
1
1
9
11
8
6
4
3
2
1
1
12
13
9
6
4
3
2
1
1
2'
9
11
10
8
6
4
3
2
2
8
11
10
8
5
4
3
2
1
67
30
17
85W
BR30 FL
9
11
10
8
6
4
3
2
2
6
8
7
6
4
3
2
2
1
5
7
7
6
4
3
2
2
1
6
8
7
6
4
3
2
2
1
18
10
6
8'
10'
12'
73
33
18
6'
8'
F.C. Beam Dia.
at 30" above floor
75
40
25
4'
5'
7'
Multiple Units /S.R. =0.7
Ctr. to Ctr. 4'
6'
8'
Footcandles
Lrg. Room Sml. Room
80
36
20
69
31
17
Ht. to Floor 8'
10'
12'
58
26
15
4'
6'
8'
29
24
22
16
11
8
6
5
4
3'
28
24
20
16
11
8
6
5
4
29
24
22
16
11
8
6
5
4
19
19
14
11
8
6
5
4
4
19
14
14
11
7
6
5
4
4
19
19
14
11
8
6
5
4
4
Ht. to Floor 30
16
10
8'
10'
12'
9'
13'
16'
Footcandles
Lrg. Room Sml. Room
4'
86
38
21
6'
8'
69
31
17
6 3/4" Cross Blade
4'
1'
2'
3'
4'
5'
6'
7'
8'
9'
41
60
53
40
30
23
17
14
11
39
60
54
41
30
23
18
14
11
3'
41
60
53
40
30
23
17
14
11
32
44
33
26
20
16
13
10
9
22
35
30
29
21
16
13
10
9
32
44
33
26
20
16
13
10
9
2'
3'
50
55
41
27
16
12
8
5
4
52
57
41
27
16
12
8
5
4
40
41
29
19
13
8
6
4
3
6
10
8
6
4
3
2
1
1
5
10
8
6
4
2
2
1
1
6
10
8
6
4
3
2
1
1
5
7
6
4
3
2
1
1
1
3
6
5
4
3
2
1
1
1
5
7
6
4
3
2
1
1
1
Ht. to Floor 8'
9'
10'
29
35
26
18
13
8
6
4
3
40
41
29
19
13
9
6
4
3
Ht. to Floor 68
37
23
10'
12'
14'
Multiple Units /S.R. =0.7
Footcandles
Lrg. Room Sml. Room
Ctr. to Ctr. 4'
89
40
22
6'
8'
75
33
19
2 x 26W QT Single Unit
F.C. Beam Dia.
at 30" above floor
15
11
8
12'
14'
16'
Multiple Units /S.R. =1.4
Footcandles
Lrg. Room Sml. Room
Ctr. to Ctr. 4'
62
28
15
6'
8'
F.C. Beam Dia.
at 30" above floor
164
103
70
4'
5'
6'
Multiple Units /S.R. =0.5
Footcandles
Lrg. Room Sml. Room
Ctr. to Ctr. 4'
217
139
96
5'
6'
195
124
87
2 x 26W QT
1'
2'
3'
4'
5'
6'
7'
8'
9"
26W TTT Single Unit
Ht. to Floor 14
8
5
8'
10'
12'
9'
13'
16'
Footcandles
Lrg. Room Sml. Room
33
15
8
F.C. Beam Dia.
at 30" above floor
18
10
6
16'
21'
27'
Multiple Units /S.R. =1.3
Ctr. to Ctr. 4'
6'
8'
Footcandles
Lrg. Room Sml. Room
87
39
22
63
28
16
100W A19 Single Unit
Ht. to Floor 8'
10'
12'
Ht. to Floor 14
8
5
8'
10'
12'
14'
19'
23'
Multiple Units /S.R. =1.6
Ctr. to Ctr. 4'
6'
8'
Footcandles
Lrg. Room Sml. Room
74
33
19
59
26
15
F.C. Beam Dia.
at 30" above floor
119
64
40
4'
5'
7'
Multiple Units /S.R. =0.7
Ctr. to Ctr. 4'
6'
8'
Footcandles
Lrg. Room Sml. Room
125
55
31
108
48
27
100
45
–
6'
8'
9
5
3
47
21
12
Ht. to Floor 8'
10'
12'
F.C. Beam Dia.
at 30" above floor
37
51
47
34
27
21
17
14
10
23
12
8
13'
18'
23'
Multiple Units /S.R. =1.5
Footcandles
Lrg. Room Sml. Room
Ctr. to Ctr. 4'
101
45
25
6'
8'
77
34
19
4'
87
39
–
23
10
6
6'
8'
7'
10'
12'
Multiple Units /S.R. =0.9
Footcandles
Lrg. Room Sml. Room
Ctr. to Ctr. 19
10
6
Ctr. to Ctr. 18
8
4
4'
Footcandles
Lrg. Room Sml. Room
51
23
13
6'
8'
39
18
10
3'
40
44
42
34
28
20
14
12
10
37
51
47
34
27
21
17
14
10
31
37
32
22
17
13
11
8
6
24
30
30
26
18
14
12
10
8
31
37
32
22
17
13
11
8
6
Footcandles with Units 2 Feet from Wall
150W BR40 FL
2'
1'
2'
3'
4'
5'
6'
7'
8'
9'
25
30
28
24
20
16
12
10
8
3'
25
30
26
25
20
15
12
10
8
25
30
28
24
20
16
12
10
8
18
22
21
18
14
11
9
7
6
15
19
15
16
14
11
9
7
6
18
22
21
18
14
11
9
7
6
Footcandles with Units 2 Feet from Wall
2'
39
49
35
29
16
11
8
8
7
3'
36
47
35
26
18
12
8
8
8
39
49
35
29
16
11
8
8
7
29
33
23
19
13
9
6
6
6
19
30
25
18
12
8
6
6
6
29
33
23
19
13
9
6
6
6
8'
9'
10'
12
8
6
8'
10'
12'
Footcandles
Lrg. Room Sml. Room
4'
38
17
10
6'
8'
2 x 26W QT Single Unit
Ht. to Floor Multiple Units /S.R. =1.2
30
14
8
2'
1'
2'
3'
4'
5'
6'
7'
8'
9'
58
63
43
27
17
12
8
6
5
3'
54
63
43
27
17
12
8
6
5
58
63
43
27
17
12
8
6
5
44
46
30
19
13
9
7
5
4
31
39
29
19
13
9
7
5
4
44
46
30
19
13
9
7
5
4
1132T
F.C. Beam Dia.
at 30" above floor
10'
12'
14'
Footcandles with Units 2 Feet from Wall
1 x 32W TTT
F.C. Beam Dia.
at 30" above floor
17
9
6
11'
15'
19'
Multiple Units /S.R. =1.2
Ctr. to Ctr. Footcandles
Lrg. Room Sml. Room
4'
63
28
16
6'
8'
50
22
12
2 x 13W TT Single Unit
Ht. to Floor 8'
9'
10'
Ht. to Floor 14
10
8
8'
10'
12'
8'
9'
11'
Multiple Units /S.R. =1.0
Ctr. to Ctr. 4'
6'
8'
2 x 26W QT Single Unit
F.C. Beam Dia.
at 30" above floor
Footcandles
Lrg. Room Sml. Room
42
19
10
33
14
8
F.C. Beam Dia.
at 30" above floor
22
12
7
9'
13'
16'
Multiple Units /S.R. =1.0
Ctr. to Ctr. 4'
6'
8'
Footcandles
Lrg. Room Sml. Room
74
33
19
54
24
14
1131 Series
2'
53
45
32
22
15
11
8
6
5
8'
10'
12'
F.C. Beam Dia.
at 30" above floor
1135/1135WH
2 x 13W TT Single Unit
Ctr. to Ctr. 6'
9'
11'
1185
1'
2'
3'
4'
5'
6'
7'
8'
9'
Ht. to Floor Footcandles with Units 2 Feet from Wall
55
43
31
21
15
11
8
6
5
1'
2'
3'
4'
5'
6'
7'
8'
9'
Ht. to Floor 75W BR30 FL Single Unit
3'
55
43
31
21
15
11
8
6
5
41
30
21
15
10
8
6
5
4
31
29
22
15
11
8
6
5
4
41
30
21
15
10
8
6
5
4
Ht. to Floor 8'
10'
12'
F.C. Beam Dia.
at 30" above floor
12
7
4
7'
10'
12'
75W BR30 SP Single Unit
Ht. to Floor 8'
10'
12'
75W PAR30 FL (T-H) Single Unit
Ht. to Floor 8'
10'
12'
Ht. to Floor 53
28
18
10'
12'
14'
16'
75W PAR30 NSP (T-H) Single Unit
F.C. Beam Dia.
at 30" above floor
Ht. to Floor 36
20
12
4'
6'
7'
75W PAR30 NFL (T-H) Single Unit
F.C. Beam Dia.
at 30" above floor
3'
4'
5'
18'
20'
22'
24'
F.C. Beam Dia.
at 30" above floor
44
34
28
23
3'
4'
4'
5'
F.C. Beam Dia.
at 30" above floor
53
33
23
16
4'
5'
7'
8'
1133 Series
120W PAR38 FL (T-H) Single Unit
F.C. Beam Dia.
at 30" above floor
Footcandles
Lrg. Room Sml. Room
4'
43
19
11
26W TTT Single Unit
F.C. Beam Dia.
at 30" above floor
Multiple Units /S.R. =0.8
Multiple Units /S.R. =0.4
Ctr. to Ctr. 2'
100W A19
1135/1135TWH
250W PAR38 FL (T-H) Single Unit
F.C. Beam Dia.
at 30" above floor
4'
6'
7'
8'
10'
12'
2'
3'
4'
1105T/1105TWH
2 x 13W TT Single Unit
3'
153
82
51
Footcandles with Units 2 Feet from Wall
150W A21
1113TGD/1113TCL
2'
Ht. to Floor 1185
Footcandles with Units 2 Feet from Wall
52
57
41
27
16
12
8
5
4
57
25
14
6'
8'
F.C. Beam Dia.
at 30" above floor
1135/1135WH
2'
1'
2'
3'
4'
5'
6'
7'
8'
9'
Footcandles with Units 2 Feet from Wall
1'
2'
3'
4'
5'
6'
7'
8'
9'
F.C. Beam Dia.
at 30" above floor
Multiple Units /S.R. =1.1
Ctr. to Ctr. F.C. Beam Dia.
at 30" above floor
44
19
11
51
23
13
8'
10'
12'
14'
20'
25'
Footcandles
Lrg. Room Sml. Room
1108 Series
Multiple Units /S.R. =0.9
Ctr. to Ctr. 1'
2'
3'
4'
5'
6'
7'
8'
9'
150W BR40 FL Single Unit
32W TTT Single Unit
Ht. to Floor Footcandles
Lrg. Room Sml. Room
4'
2'
1 x 13W QT
3'
F.C. Beam Dia.
at 30" above floor
11'
16'
20'
65
29
17
6'
8'
Footcandles with Units 2 Feet from Wall
1 x 32W TTT
1149/1150/1151
Multiple Units /S.R. =1.5
Ctr. to Ctr. Footcandles with Units 2 Feet from Wall
1085
1 x 13W QT Single Unit
75W PAR30 FL (T-H) Single Unit
F.C. Beam Dia.
at 30" above floor
Multiple Units /S.R. =1.2
Ctr. to Ctr. 16
18
13
9
6
4
3
2
2
Footcandles with Units 2 Feet from Wall
1'
2'
3'
4'
5'
6'
7'
8'
9'
Ht. to Floor 6 3/4" Shallow Alzak®
6 3/4" Shallow Alzak®
90
8'
10'
12'
17
18
13
9
6
4
3
2
2
3'
1143/1144
100W A19 Single Unit
1'
2'
3'
4'
5'
6'
7'
8'
9'
F.C. Beam Dia.
at 30" above floor
1143/1144
Ht. to Floor 22
10
6
17
23
21
17
12
9
7
5
4
4'
1135/1135WH
2'
2 x 13W QT Single Unit
150W A21 Single Unit
F.C. Beam Dia.
at 30" above floor
Footcandles
Lrg. Room Sml. Room
4'
29
13
7
6'
8'
1145/1146
Multiple Units /S.R. =1.1
Ctr. to Ctr. Distance from Ceiling
8
11
9
6
4
3
2
1
1
3'
6 3/4" Alzak®
6 3/4" Alzak®
8'
10'
12'
4'
65
28
16
1085
2'
100W A19 Single Unit
Footcandles
Lrg. Room Sml. Room
Footcandles with Units 2 Feet from Wall
60W A19
60W A19
1145/1146
Ht. to Floor Ctr. to Ctr. 1'
2'
3'
4'
5'
6'
7'
8'
9'
3'
Distance from Ceiling
13
17
15
11
8
6
5
4
3
Footcandles with Units 2 Feet from Wall
8
11
9
6
4
3
2
1
1
13'
15'
18'
2'
6 3/4" Step Baffle Wall Washer
12
17
15
11
8
6
5
4
3
3'
5" Basic Wall Washer
Distance from Ceiling
5" Step Baffle Wall Washer
1'
2'
3'
4'
5'
6'
7'
8'
9'
6
4
3
Multiple Units /S.R. =1.5
Footcandles
Lrg. Room Sml. Room
74
33
19
6'
8'
1035/1035WH
8'
9'
10'
5'
6'
8'
F.C. Beam Dia.
at 30" above floor
6 3/4" Low Profile Alzak®
2'
1 x 13W QT
56
30
19
28
13
7
Ht. to Floor Multiple Units /S.R. =1.8
Ctr. to Ctr. 1195/1196
150W A21
1035/1035WH
Footcandles with Units 2 Feet from Wall
13
17
15
11
8
6
5
4
3
HT. to Floor Footcandles
Lrg. Room Sml. Room
Ctr. to Ctr. 8
4
3
1 x 13W QT Single Unit
150W PAR38 FL (T-H) Single Unit
F.C. Beam Dia.
at 30" above floor
Distance from Ceiling
4'
Distance from Ceiling
1'
2'
3'
4'
5'
6'
7'
8'
9'
F.C. Beam Dia.
at 30" above floor
36
16
9
6'
8'
8'
10'
12'
10'
14'
17'
Multiple Units /S.R. =1.1
Footcandles
Lrg. Room Sml. Room
4'
20
11
7
6 3/4" Step Baffle Wall Washer
37
17
9
5" Step Baffle Wall Washer
Distance from Ceiling
5" Open Wall Washer
Multiple Units /S.R. =0.8
Ctr. to Ctr. 1095/1096
1 x 13W QT
49
22
12
Multiple Units /S.R. =1.0
Ctr. to Ctr. Ht. to Floor Distance from Ceiling
46
21
12
6'
8'
67
30
17
6'
8'
8'
10'
12'
8'
10'
12'
F.C. Beam Dia.
at 30" above floor
6 3/4" Basic Wall Washer
8'
10'
12'
Footcandles
Lrg. Room Sml. Room
4'
4'
13
9
7
6 3/4" Low Profile Cross Blade
24
11
6
Footcandles
Lrg. Room Sml. Room
8'
9'
10'
6 3/4" Low Profile Baffle
Wall Washer
31
14
8
6'
8'
Multiple Units /S.R. =1.5
Ctr. to Ctr. 6 3/4" Steep Slope
4'
13'
18'
23'
Multiple Units /S.R. =1.8
Ctr. to Ctr. 10'
14'
17'
Ht. to Floor Distance from Ceiling
Footcandles
Lrg. Room Sml. Room
7
4
2
14
8
5
100W A19 Single Unit
26W TTT Single Unit
F.C. Beam Dia.
at 30" above floor
6 3/4" Step Baffle Wall Washer
Multiple Units /S.R. =1.3
Ctr. to Ctr. 8'
10'
12'
8'
10'
12'
Distance from Ceiling
12'
14'
16'
Ht. to Floor Distance from Ceiling
9
6
5
F.C. Beam Dia.
at 30" above floor
5" Step Baffle Wall Washer
8'
9'
10'
Ht. to Floor 8
15
12
9
6
4
3
2
2
Footcandles with Units 2 Feet from Wall
75W A19
1 x 13W QT Single Unit
75W PAR30 FL (T-H) Single Unit
Distance from Ceiling
F.C. Beam Dia.
at 30" above floor
4
15
12
9
6
4
3
2
2
1095/1096
75W A19 Single Unit
5" Aperture Cone
5" Deep Specular Alzak®
37
17
9
8
15
12
9
6
4
3
2
2
1008 Series
1 x 13W QT Single Unit
HT. to Floor 42
19
11
6'
8'
9
20
16
11
8
5
4
3
2
5" Open Wall Washer
1045/1046
4'
24
11
6
7
20
16
11
8
5
4
3
2
Ht. to Floor 6 3/4" Basic Wall Washer
28
12
7
6'
8'
9
20
16
11
8
5
4
3
2
1 x 13W QT Single Unit
F.C. Beam Dia.
at 30" above floor
6 3/4" Low Profile Step Baffle
4'
1'
2'
3'
4'
5'
6'
7'
8'
9'
Ht. to Floor 1132
6 3/4" Shallow Slope
16
7
4
Footcandles
Lrg. Room Sml. Room
Ctr. to Ctr. Footcandles
Lrg. Room Sml. Room
100W A19 Single Unit
2'
Distance from Ceiling
19
9
5
6'
8'
3'
5'
6'
Multiple Units /S.R. =0.6
Multiple Units /S.R. =0.8
Ctr. to Ctr. 48
26
16
18"
5" Basic Wall Washer
4'
8'
10'
12'
3'
5'
7'
Footcandles with Units 18 Inches from Wall
60W BT15
Distance from Ceiling
Footcandles
Lrg. Room Sml. Room
44
18
10
F.C. Beam Dia.
at 30" above floor
Distance from Ceiling
Multiple Units /S.R. =1.1
Ctr. to Ctr. 8'
10'
12'
1108 Series
6 3/4" Open Wall Washer
9'
13'
16'
Ht. to Floor 6 3/4" Deep Alzak®
7
4
2
F.C. Beam Dia.
at 30" above floor
6 3/4" Aperture Cone
8'
10'
12'
HT. to Floor 1045/1046
6 3/4" Aperture Cone
50W R20 Single Unit
F.C. Beam Dia.
at 30" above floor
Distance from Ceiling
3 3/4" Open Wall Washer
60W BT15 Single Unit
Ht. to Floor 2095/2096
50W PAR20 NFL (T-H) Single Unit
5" Deep Alzak®
2008 Series
3 3/4" Aperture Cone
3 3/4" Deep Specular Alzak®
2045/2046
Lytecaster Performance Product Photometrics
75W PAR30 FL (T-H) Single Unit
Ht. to Floor 8'
10'
12'
F.C. Beam Dia.
at 30" above floor
36
20
12
4'
6'
7'
75W PAR30 NFL (T-H) Single Unit
Ht. to Floor 10'
12'
14'
16'
75W PAR30 NSP (T-H) Single Unit
F.C. Beam Dia.
at 30" above floor
Ht. to Floor 53
33
23
16
4'
5'
7'
8'
18'
20'
22'
24'
F.C. Beam Dia.
at 30" above floor
44
34
28
23
3'
4'
4'
5'
L y t e c a s t e r
91
Accessories
Accessories
Replacement Thermal Protectors
Lytecaster Hole Saw
Frame-In Kit
Part#
Order/Pulse#
Frame-In Kit
Part#
Order/Pulse#
1004ICV
1104ICX
1004IC, 1004ICR, 1004SIC,
1004SICR, 1104IC
1104ICX
2004ICV
1002P1, 1003R, 2000LV,
2000LVR, 2002P1, 2003R
LH-1209K
LH-3332A
921250
932244
LH-1209K
SK-3101
921250
923096
LH-3334
929895
MI-7400
898640
LH-3334B
MI-5481C
932301
931759
SK-3104
917117
SK-3113
925696
SK-3075
916970
1000LVNT, 2000LVNT
1000P1, 1100P1
1000AICM, 1000IC, 1000ICV,
1100AICM, 1100DAICM
1000LV, 1000LVR
2000AIC, 2000AICV,
2000IC, 2000P1
11700P1
SK-3114
926417
HC356
Dedicated hole saw reduces installation
time. Completely adjustable cutter comes
with Lytecaster template to take out guess
work. Place cutting elements in the holes
labeled for the frame you are using and
tighten...you’re ready to cut. Durable dust
shield eliminates clean-up even when
remodeling. Comes with additional drill
bits, extra cutting elements and contractor
pencil all housed in a convenient, durable
plastic case.
Note: Please refer to part# and pulse# when ordering.
Lytening AirSeal® Gasket Kit
Slot Aperture Faceplate
Mounting Bars
Accessory Cones
1964*
20" mounting bar extenders. Set of 2. For 2000, 1000 Series.
1966*
Standard length (13") mounting bars. Set of 4.
For 2000, 1000 Series (Except IC).
LAS56
Converts Lytening housings to comply with Model Energy Code
and Washington State Energy Code air leakage requirements
when Lytening new construction housings have the factory
installed tape or knockouts removed.
Conversion faceplates for Lytecaster MR16 low voltage Pinhole
reflectors (1000 and 1100 Series). Matte White finish.
1976*
13" replacement bars. Set of 4.
For Series 1100 and IC
Frame-In Kits.
1452For 1052LV Pinhole
1552For 1152 Pinhole
*Not for use
with Lyte\ning
Frame-In Kits.
1977
Set of replacement mounting bars for Lyte\ning.
Replacement cones for Lytecaster reflectors (not for
use with Basic reflectors, Eyeballs and Shallow
Specular reflectors, Pinholes and Slots). To order finishes other than Matte Black Step Baffle, add finish
designations after catalog number (for example
1350CL for Specular Clear, 2000 Series).
1350 1350
1450
1450
1550
1550
Plaster Ceiling Ring
Finish
Matte Black Step Baffle
CL, GD, BK, BA, BG, WH, WHB, CD
Matte Black Step Baffle
CL, GD, BK, BA, BG, WH, WHB, CD
Matte Black Step Baffle
CL, GD, BK, BA, BG, WH, WHB, CD
Comp. Refl.
2000 Series
2000 Series
1000 Series
1000 Series
1100 Series
1100 Series
Extra Thick Ceiling Mounting Ring
CL Specular Clear
GD Specular Gold
BK Specular Black
BA Brushed Clear
BG Brushed Gold
WH Matte White
WHB Matte White Baffle
CD Clear Diffuse
Extra Wide Flange Trim Ring
3/4" height
Lytening AirSeal Gasket Kit
®
MR16 Socket Replacement
Retaining Clips
Matte White Finish
1975A
1975B
LAS56R
Converts Lytening Remodeler housings to comply with Model
Energy Code and Washington State Energy Code air leakage
requirements.
1975B
For Series
2000LV FrameIn Kits and
1052LV Trim.
1975A
For Series
1000LV FrameIn Kits and Trims
1152, 1161.
1955
For installation in existing ceilings. Box of 100. For Series
2000, 1000, 1100 (except Basic reflectors, Deep and Shallow
Specular reflectors). 1 1/4" maximum ceiling thickness.
Fits all Frame-In Kits except Non-IC Remodelers. Full 7/8"
deep. Installed after mounting frame, before plastering ceiling.
Mounting ring holds reflector snug to ceiling. Can be used
with Standard Frame-In Kits where ceilings are up to 2" thick.
1954
For 1100 Series Reflector Trims
(except 1126-1128, 1170-1199) – O.D. 8 5/8" I.D. 6 3/4.
1959
1960
1961
1967A 1100 Series (except 1104IC/R, 1104SIC/R, 1104FI/R)
1967B 1000 Series (except 1004IC/R, 1004SIC/R)
1967C 2000 Series
Not for 1095, 1096, 1195, 1196 Trims
1957
For Series 1000 Reflector Trims – O.D. 7" I.D.5
(except 1071, 1082, 1085, 1076).
Series 2000
Series 1000
Series 1100
Not for 2000AICV
Not for Lytening or 1100DAICM
MR16 Remote Transformer
T-Bar Ceiling Clips
Staples & Nails
Staple
Order quantity of 1 per fixture
(will receive pack of 4).
92
1985S 1100 Series
Medium Base Socket Extender
8609
225W Max.
Nail
1985N
1000 Series
1956
For use with series 2000, 1000 and 1102HF.*
*All other 1100 Series and Lytening Frame-In Kits mounting
bars have integral T-bar tab. Position notched area of mounting
bar on top of T-bar and lock by bending tab underneath T-bar
bead. Mounting bars permit frame to be positioned off-center
between 24" joists.
8608
75W Max.
Anchors 1000+1100 Series
Frame-In kits when used as
a remodeler (see instruction
sheet for application and
further information).
277v Operation Remote
Step-Down Transformer
MR16 Remote Transformer
LVNT Frame-In Kits may be installed in new ceilings up to 1"
thick. Lightolier Remote Transformers 8608 (75W) and 8609
(225W) are fused and suitable for recessed installation.
7997
Supplies 120v fixture from a 277v branch circuit (20 amp. minimum). Can be used for multiple fixtures (not to exceed 300W
maximum load).
1968
For 50W and 75W short neck PAR30 lamps only. Limited compatibility (see individual reflector trim data). Adds 1 1/4".
L y t e c a s t e r
93
Putting Lytecaster to Work
Lighting Specifications
The following guidelines provide valuable information on the effective use of
Lytecaster.
C General Lighting from Multiple Units
Ctr. to Ctr.
1 113 Reflector Trims with one 32W Triple Tube lamp mounted in a small
room with an 8' high white ceiling and light walls.
Find
The spacing of fixtures for 25 to 30 footcandles at a 2 1/2' work plane.
Solution
S ee Multiple Units chart. These fixtures, mounted on 6' centers, will
provide 30 footcandles at a work plane height of 30". The Spacing Ratio
of 1.1 allows these fixtures to be mounted up to 6' apart {1.1 x (8 - 2.5)}
and still provide even lighting.
Large
Room
Small
Room
87
39
22
68
30 S.R. = 1.1
14
30"
4'
6'
8'
High
(Over 50 footcandles)
Medium
(30-50 footcandles)
Hobby Areas
Kitchens
Laundry
Study
Home Office
Good Given
Lighting Data for 1105 reflector trim with a 150W BR40 FL lamp.
Find
The footcandle level for 90W BR40 FL lamp.
2'
4'
30˚
6'
Solution D
ivide the lumens of the 90W BR40 FL (1100) by the lumens of the 150W
BR40 FL (1525) {1100 divided by 1525 = 0.7}. Then, multiply the footcandle values of the fixture data by 0.7.
Footcandle Multipliers for Alternate Finishes (A Lamp, CFL, HID)*
(Against Clear/Gold)
(Against Black Baffle)
Maintenance Conditions
Medium Poor
.75
.70
.60
.75
.70
.65
Matte White Specular
Cone
Black Cone
.65
.3
White
Baffle
1.4
1000
.85
.6
1.4
1100
.90
.7
1.5
* Footcandles shown with Specular Cone units are for Clear and Gold finishes; with
Step or Basic Baffle units are for Black Baffles. Multipliers above are against those
footcandle values.
45° Aiming Angle
Distance (D)
2' 4' 6' 8'
60W
75W
35W
50W
50W
75W
45W
60W
90W
100W HIR
120W
250W
PAR16
PAR16
PAR20
PAR20
PAR30
PAR30
PAR38
PAR38
PAR38
PAR38
PAR38
PAR38
650
900
360
550
660
1130
560
850
1310
2070
1800
3600
2000
2000
2500
2500
2500
2500
2500
3000
2500
3000
3000
4500
MR16
715
925
685
925
1150
2000
2000
2000
2000
2000
900
10,000
860
10,000
1250
10,000
1250
10,000
1800
10,000
1800
10,000
2400
10,000
(See page 130)
65W
85W
65W
85W
120W
BR30
BR30
BR40
BR40
BR40
45˚
13W
13W
13W
18W
26W
26W
32W
Twin Tube 2-Pin
(GX23)
Quad Tube 2-Pin
(GX23-2)
Quad Tube 4-Pin (G24q-1)
Quad Tube 4-Pin (G24q-2)
Quad Tube 4-Pin (G24q-3)
Triple Tube 4-Pin (GX24q-3)
Triple Tube 4-Pin (GX24q-3)
Metal Halide Lamps (Open Fixture Type)
10'
2'
4'
am
.70
Reflector
Trim Series
2000
10'
14'
Be
.75
8'
12'
of
.80
Good = Clean area, regular maintenance and group relamping.
Medium = Medium dirty area, regular maintenance and spot relamping.
Poor = Dirty area, poor maintenance and spot relamping.
94
Lamp wattages given for each incandescent reflector trim are the maximum for the
lamp type specified. To convert the lighting data to a lower wattage lamp of the same
type, multiply the footcandle values by the ratio of the lumens of the two lamps. Note
beam diameter and spacing ratio (S.R.) do not change.
1500
1000
750
750
750
Compact Fluorescent Lamps
Distance (D)
2' 4' 6' 8'
F Footcandle Conversion for Downlights
465
850
1190
1690
2850
30° Aiming Angle
er
A, Triple, Quad & Twin Tube 30"
Beam
Diameter
5'
6'
8'
nt
PAR, BR, MR
Beam Dia.
Foot-
Candles
56
30
19
A19
A19
A19
A19
A21
Projector (PAR) Halogen Lamps
Ce
Enclosed Downlights A, Triple, Quad & Twin Tube
F. C.
Work Plane
Height to Floor
8'
10'
12'
40W
60W
75W
100W
150W
Reflector (BR) Lamps
eam
Lamp Type Rm.
Ht.
Low Voltage Projector Lamps
Example: (1005) 75W PAR30
Rated Lumens Rated Life
(Initial)
(Hours)
General Service Incandescent Lamps
fB
Dining Room
Hallways
Closets
Light loss factors compensate for dirt accumulation and lamp depreciation.
Maintained Footcandles = Initial Footcandles x Light Loss Factor (LLF)
Fixture
C
A
ro
Work Bench
B Light Loss Factors
Open Downlights
E Downlighting from a Single Unit
nte
Residential
Price-Oriented Retail
Quick Service Restaurants
Fine Assembly Work
Laboratories
General Retail
General Office
Classrooms
Libraries
Reception
Leisure Restaurant
Public Spaces
Corridors
Stairs
Social Areas
Intimate Restaurant
D
Ce
Low
(Less than 30 footcandles)
Commercial
Example: When an accent light is located 3' from a wall and aimed 30° from vertical,
the center of the light beam will be about 5' down from the ceiling.
To find the maximum spacing of fixtures for even lighting, multiply the fixture’s
Spacing Ratio (S.R.) by the fixture height above the work plane.
(Minimum, Maintained)
The charts locate the distance (C) to the center of the light beam for various mounting
distances (D) and for aiming angles 30° and 45° from vertical. 30° from vertical is
the preferred aiming angle for lighting pictures on a wall.
D Spacing Ratio
Footcandle (FC) values are initial and are at the center of the beam, 30" above the floor.
The Beam Diameter is to the point that the candlepower drops to 50% of maximum.
A Recommended General Lighting Levels
Size the beam to the object(s) being highlighted and illuminate them up to three times
the general level.
G Accent Lighting/Beam Center Location
Footcandles
Spacing
Rm.
Ht.
Example: (1113) 1 x 32W Triple Tube
Given
For the best viewing of pictures locate accent lights so that their beams are aimed
30° from vertical (Section G). Three-dimensional objects stand out best when crosslighted from two accent lights.
Example: (1113) 1 x 32W Triple Tube
Ctr. to Ctr.
Work Plane
Watts
Bulb
Distance (C)
A simple layout of downlights follows five basic steps:
1. Determine the level of illumination, in footcandles, depending on the usage of the
space. (Section A)
2. Select the light source based on efficiency, lamp life, color and dimming ability. Be
sure to consider Energy Smart®, long-life compact fluorescent and HID sources.
3. Select the downlight, based on light source, size and finish.
4. Use Light Loss Factors (Section B) to assure adequate maintained footcandles.
(Maintained Footcandles = Initial Footcandles x LLF)
5. Determine downlight spacing from the chart in Section C. When the layout is predetermined by the space, use footcandle charts to find the lighting level. When
maximum spacing is desired (in a hallway, for example) use the Spacing Ratio
(Section D) to assure even lighting.
Footcandle values are initial and average and are at a work plane height of 30" above
the floor. They are shown for various fixture spacings in a large room (30' x 50') and a
small room (8' x 12'), both with ceiling heights of 8' to 12'. Room finishes are typical:
white ceiling (80% refl.), light walls (50% refl.), and dark floor (20% refl.).
Lamp Data
Use individual fixtures in small areas or to create focal pools of light. (Section E)
6'
8'
Distance (C)
General Lighting
Accent Lighting
10'
12'
70W (Coated) ED17/Med.
100W (Coated) ED17/Med.
5400
7900
16,000
16,000
70W
100W
3400
5800
8,500
8,500
PAR38/Med.
PAR38/Med.
The shape of a bulb is indicated by one or more letters such as A, R, PAR, etc. The
size is given by a number which expresses the diameter in eighths of an inch. Thus, a
BR40 bulb is of the BR shape, 40 eighths (40/8) or 5" in diameter. Lamp data shown
is typical. Contact lamp manufacturer for specific data.
14'
L y t e c a s t e r
95
LY T E P O I N T S
A comprehensive selection of small aperture
recessed lighting products representing the ultimate
combination of quality, versatility and style.
LytePoints comprise a complete
Low Voltage: There’s no better
palette of inter­change­able trim
way to create high-impact accent
choices. Each luminaire is
lighting for homes, retail stores
designed to produce specific
and other spaces than with low
lighting effects with a unique
voltage halogen downlighting.
com­bi­nation of high-performance
By bringing out form, color and
optics and unparalleled aesthetics.
texture in the objects being lighted,
LytePoints provide the power to
low voltage lighting draws the
enrich your environment with
viewer in and adds excitement to
dynamic lighting effects.
the composition.
Whether your design calls for
general lighting, ambi­ence lighting,
accent lighting, task lighting or
wall washing, there is a LytePoints
product perfectly suited to your
needs. Lighting effect icons are
provided for quick identification of
the particular distribution of light
from each luminaire.
Incandescent: For superior color
rendering, quiet dimming and
economical maintenance, nothing
compares to incandescent lighting.
Lytecaster’s wide selection of
reflector trims and Frame-In Kit
options allows the designer great
flexibility in achieving all the beauty
and drama incandescent lighting
can deliver.
96
Contents
Product Matrix |
300 Series 3 3/4" Aperture/Frame-In Kits |
300 Series Trims |
400 Series 3 3/4" Aperture/Frame-In Kits |
400 Series Trims |
LytePoints Linear |
Accent Lighting Performance Data |
Accessories |
Page
100
103
106
117
118
122
130
131
L y t e c a s t e r
97
LytePoints Flex Installation System
LytePoints Low Voltage Luminaires
How does the FLEX System provide added flexibility for renovation projects and new constructions (IC
and Non-IC) using LytePoints Series 300X and 400X luminaires?
• Hassle-free installations even in not-so-perfect conditions.
• No vertical housing adjustment required.
• Housing and trim are mounted after painting and plastering, ensuring a cleaner, more consistent quality finish.
• Added stability provided by “clamp-down action” of specially designed factory‑installed Residence mounting clips
(patent #2,184,149).
• Easier access to components after luminaire installation.
Complete Fixture =
Halogen
By bringing out form, color and texture in the objects
being lighted, low voltage halogen lighting draws the
viewer in and adds excitement to the composition.
LytePoints low voltage downlights feature MR16 lamps
that provide highly focused beams that are particularly
well suited for accent lighting. These low voltage
incandescent sources are also 50% brighter with lamp
life as long as 4000 hours.
There’s no better way to create high-impact accent
and ambience lighting for homes, retail stores and
other spaces than with low voltage lighting. Lytecaster
provides a wide range of attractive reflector trims to
meet the needs of the most discerning eye.
+
Thanks to two key slots on top of the housing, you
have two ways to attach the housing to the Power
Pack. When in a tight spot, remodeler housings can be
installed with mounting clips parallel to joists, conduits
or other obstacles, providing more room to maneuver.
LytePoints low voltage downlights not only offer an
extensive selection of finishes in both 300 and 400
series but also feature a range of frame-in-kits and
remodelers designed for either MR16 or ES/ESD16
sources.
MR16
Good 
Line-voltage ES16/ESD16 downlights provide suitable
lighting quality; lamps are either flush with the ceiling or
slightly recessed.
ES16 / ESD16
Introducing FLEX, LytePoints improved modular
mounting system for faster, more convenient and more
forgiving luminaire installations.
With the FLEX System, you have the freedom to
choose housing positions 0° or 90°
MR16 lamps offer a unique punch and sparkle which
is ideal for highlighting small objects, such as artwork,
glass and tableware. For added ambience, several low
voltage luminaires feature decorative glass and enhance
the decor by adding luminance to the ceiling line.
Performance Options
Look for the star rating on every LytePoints luminaire
to determine quality and facilitate selection... Whether
rated Good, Better, or Best, LytePoints downlights are
designed to achieve the highest output possible from the
available source while providing superior visual comfort
and quality lighting.
The FLEX System features “clamp-down action” mounting clips for
trouble-free installation
Better 
• New constructions (IC and Non-IC): Installers can work faster
because Frame-in Kit stability is not as critical as with competing
brands, given that mounting clips sandwich housing and Frame-in Kit to
ceiling material.
Housing made of steel
for strength, included
with luminaire trim.
Exclusive Residence mounting clips reduce installation
time and provide a superior
installation.
Quality lighting from these low-voltage MR16 downlights
feature lamps that are flush with the ceiling.
Transformer Noise
• Renovations with insulated ceilings accessible from above:
Installers have no need for mounting bars and spend less time in attic,
as housing mounting clips secure Frame-in Kit in position from below.
Flange remains free
of paint and plaster
because housing is
firmly secured to
ceiling after finishing.
Housing do not need
vertical adjustment,
ensuring uniform
trim positioning and
consistent look.
Wide 3/8" integrated
flange allowing
more forgiving
installations.
Some noise is produced by low-voltage lighting systems
from both the lamp themselves and transformers,
especially when dimmed. This noise can be audible
depending on the lamp / transformer combination, the
level of background noise, the absorbency of the
surrounding surfaces and the hearing of the people
involved. Whether the noise is objectionable depends
largely on how critical the application is.
In general, non-dimmed, magnetic low-voltage
transformers will be audible to most observers in most
applications. In applications where noise is a critical
issue, special care should be taken to examine all design
options especially the choice of lighting, surface and
furnishing materials. Electronic transformers produce
significantly less noise and are virtually inaudible
Best 
General Illumination
These high-quality low-voltage MR16 downlights include
fully recessed lamps for increased visual comfort.
General illumination provides overall illumination and defines a space. Good general lighting should be evenly
distributed across the space and provide a glare-free light source.
Wall Washing
Wall Washing provides a smooth, even illumination over the length and height of a wall surface. It is an ideal way to enhance
the sense of spaciousness in a room. Wall washing can also be used to highlight specific areas, selected materials, or
artwork.
Clamping power:
Residence mounting clips
feature two screw guides
allowing to clamp down
on ceilings from 1/8" to
1" thick.
Wet Location
Wet Location provides overall illumination in locations where the light source may come into direct contact with
water.
Accent Lighting
Accent lighting provides dramatic interest in a space by drawing attention to selected objects and surfaces such
as artwork, place settings and niche areas. It is typically achieved with adjustable downlights whose beams can be
carefully aimed.
98
L y t e c a s t e r
99
LytePoints Product Selection Matrix
Low Voltage
MR16 300X Series
Non-IC Remodeler
Non-IC & IC Frame-In Kit
Magnetic
300MRX
Low-Profile
Electronic
3401MREX
LytePoints Product Selection Matrix
Ultra-Shallow
Electronic
303MRE
Magnetic
302MRX
Electronic
302MREX
Magnetic
302MRIC7X
Magnetic
302MRIC9X
Magnetic
302MRAICX*
Non-IC
Remodeler
300ESX
Non-IC
Frame-In Kit
302ESX
IC Frame-In Kit
302ESICX
Lytening
AirSeal®
302ESAICX
Low Voltage
MR16 400X Series
Non-IC Remodeler
Non-IC & IC Frame-In Kit
Magnetic NonIC Remodeler
400MRX
Low-profile
Magnetic NonElectronic Non- IC Frame-In Kit
IC Remodeler
402MRX
3401MREX
Electronic Non- Magnetic IC
IC Frame-In Kit Frame-In Kit
402MREX
402MRIC9X
12V
Description
Lamps Height
Adjustable Premium 50W
5 7/8"
Die-Cast Step Baffle MR16
(p. 106)
12V
12V
12V
12V
12V
12V
12V
120V
Lamps Height Lamps Height Lamps Height Lamps Height Lamps Height Lamps Height Lamps Height Lamps
Height
50W
4 5/8" N/A
50W
6 1/8" 50W
6 1/8" 50W
7 1/2" 50W
9 1/4" 50W
7 1/2" 50W
5 7/8"
MR16
MR16
MR16
MR16
MR16
MR16
ES/ESD16
120V
Lamps Height
50W
6 1/8"
ES/
ESD16
120V
Lamps Height
50W
9 1/4"
ES/
ESD16
120V
Lamps Height
50W
7 1/2"
ES/
ESD16
304
Adjustable Cone
(p. 106)
50W
MR16
5 7/8"
42W
MR16
4 5/8"
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
50W
MR16
7 1/2"
50W
MR16
9 1/4"
50W
MR16
7 1/2"
50W
5 7/8"
ES/ESD16
50W
ES/
ESD16
6 1/8"
50W
ES/
ESD16
9 1/4"
50W
ES/
ESD16
7 1/2"
404
Adjustable Cone
(p. 118)
75W
MR16
5 7/8"
50W
MR16
4 5/8"
75W
MR16
6 1/8"
75W
MR16
6 1/8"
50W
MR16
9 1/4"
304
Adjustable
Premium Cone
(p. 107)
50W
MR16
5 7/8"
50W
MR16
4 5/8"
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
50W
MR16
7 1/2"
50W
MR16
9 1/4"
50W
MR16
7 1/2"
50W
5 7/8"
ES/ESD16
50W
ES/
ESD16
6 1/8"
50W
ES/
ESD16
9 1/4"
50W
ES/
ESD16
7 1/2"
406
Eyeball
(p. 118)
75W
MR16
5 7/8"
50W
MR16
4 5/8"
75W
MR16
6 1/8"
75W
MR16
6 1/8"
50W
MR16
9 1/4"
308
Adjustable Pinhole
(p. 107)
50W
MR16
5 7/8"
42W
MR16
4 5/8"
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
N/A
50W
MR16
9 1/4"
37W
MR16
7 1/2"
50W
5 7/8"
ES/ESD16
50W
ES/
ESD16
6 1/8"
50W
ES/
ESD16
9 1/4"
N/A
409
Slot
(p. 118)
75W
MR16
5 7/8"
50W
MR16
4 5/8"
75W
MR16
6 1/8"
75W
MR16
6 1/8"
50W
MR16
9 1/4"
309
Slot Aperture
(p. 109)
50W
MR16
5 7/8"
42W
MR16
4 5/8"
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
N/A
50W
MR16
9 1/4"
37W
MR16
7 1/2"
50W
5 7/8"
ES/ESD16
50W
ES/
ESD16
6 1/8"
50W
ES/
ESD16
9 1/4"
N/A
413
Gimbal
(p. 119)
75W
MR16
5 7/8"
50W
MR16
4 5/8"
75W
MR16
6 1/8"
75W
MR16
6 1/8"
50W
MR16
9 1/4"
313
Gimbal
(p. 109)
50W
MR16
5 7/8"
50W
MR16
4 5/8"
37W
MR16
3 1/4"
50W
MR16
6 1/8"
50W
MR16
6 1/8"
50W
MR16
7 1/2"
50W
MR16
9 1/4"
50W
MR16
7 1/2"
N/A
N/A
N/A
478
Elbow
(p. 119)
75W
MR16
5 7/8"
50W
MR16
4 5/8"
75W
MR16
6 1/8"
75W
MR16
6 1/8"
50W
MR16
9 1/4"
378
Elbow
(p. 111)
50W
MR16
5 7/8"
50W
MR16
4 5/8"
37W
MR16
3 1/4"
50W
MR16
6 1/8"
50W
MR16
50W
6 1/8"
37W
MR16
7 1/2"
37W
MR16
9 1/4"
50W
MR16
7 1/2"
N/A
5 7/8"
50W
MR16
4 5/8"
50W
MR16
6 1/8"
50W
MR16
6 1/8"
50W
MR16
9 1/4"
315
Wall Washer / Shield 50W
(p. 111)
MR16
5 7/8"
50W
MR16
4 5/8"
37W
MR16
3 1/4"
50W
MR16
6 1/8"
MR16
50W
6 1/8"
N/A
50W
MR16
9 1/4"
50W
MR16
7 1/2"
316
Contour
(p. 111)
50W
MR16
5 7/8"
50W
MR16
4 5/8"
37W
MR16
3 1/4"
50W
MR16
6 1/8"
MR16
50W
6 1/8"
N/A
50W
MR16
9 1/4"
50W
MR16
317
Residence Disk
(p. 114)
50W
MR16
5 7/8"
50W
MR16
4 5/8"
37W
MR16
3 1/4"
50W
MR16
6 1/8"
MR16
50W
6 1/8"
N/A
50W
MR16
9 1/4"
322
Rounded Glass
(p. 114)
50W
MR16
5 7/8"
50W
MR16
4 5/8"
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
N/A
50W
MR16
9 1/4"
325
Adjustable Premium N/A
Die-Cast Step Baffle
ES16 (p. 110)
N/A
N/A
N/A
N/A
N/A
N/A
330
Gimbal ES16
(p. 110)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
372
Cross Blade
(p. 108)
50W
MR16
5 7/8"
50W
MR16
4 5/8"
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
50W
MR16
373
Glass Cylinder
(p. 113)
50W
MR16
5 7/8"
50W
MR16
4 5/8"
37W
MR16
50W
MR16
6 1/8"
50W
MR16
6 1/8"
374
Basic Cone
(p. 112)
50W
MR16
5 7/8"
50W
MR16
4 5/8"
N/A
50W
MR16
6 1/8"
50W
MR16
375
Basic Baffle
(p. 112)
50W
MR16
5 7/8"
50W
MR16
4 5/8"
N/A
50W
MR16
6 1/8"
376
Shower Light
(p. 113)
50W
MR16
5 7/8"
50W
MR16
4 5/8"
N/A
50W
MR16
377
Frosted Glass
(p. 112)
50W
MR16
5 7/8"
50W
MR16
4 5/8"
N/A
384
Basic Adjustable
Cone
(p. 108)
50W
MR16
5 7/8"
50W
MR16
4 5/8"
385
Basic Adjustable
Baffle
(p. 108)
50W
MR16
5 7/8"
50W
MR16
4 5/8"
305
N/A
50W
6 1/8"
N/A
50W
9 1/4"
N/A
7 1/2"
451
OVNI Luna
(p. 120)
50W
MR16
50W
5 7/8"
ES/ESD16
50W
ES/
ESD16
6 1/8"
50W
ES/
ESD16
9 1/4"
50W
ES/
ESD16
7 1/2"
452
OVNI Adjustable
(p. 120)
50W
5 7/8"
MR16**
50W
4 5/8"
MR16**
50W
6 1/8"
MR16**
50W
6 1/8"
MR16**
50W
9 1/4"
MR16**
7 1/2"
50W
5 7/8"
ES/ESD16
50W
ES/
ESD16
6 1/8"
50W
ES/
ESD16
9 1/4"
50W
ES/
ESD16
7 1/2"
450
OVNI Matrix
(p. 120)
50W
5 7/8"
MR16**
50W
4 5/8"
MR16**
50W
6 1/8"
MR16**
50W
6 1/8"
MR16**
50W
9 1/4"
MR16**
50W
MR16
7 1/2"
50W
5 7/8"
ES/ESD16
50W
ES/
ESD16
6 1/8"
50W
ES/
ESD16
9 1/4"
50W
ES/
ESD16
7 1/2"
50W
MR16
7 1/2"
N/A
N/A
N/A
50W
5 7/8"
ES/ESD16
50W
ES/
ESD16
6 1/8"
50W
ES/
ESD16
9 1/4"
50W
ES/
ESD16
7 1/2"
N/A
50W
5 7/8"
ES/ESD16
50W
ES/
ESD16
6 1/8"
50W
ES/
ESD16
9 1/4"
50W
ES/
ESD16
7 1/2"
N/A
**MR16 Shielded lamps only
N/A
50W
MR16
9 1/4"
50W
MR16
7 5/8"
50W
5 7/8"
ES/ESD16
50W
ES/
ESD16
6 1/4"
50W
ES/
ESD16
9 1/4"
50W
ES/
ESD16
7 5/8"
N/A
50W
MR16
9 1/4"
50W
MR16
7 1/2"
50W
5 7/8"
ES/ESD16
50W
ES/
ESD16
6 1/8"
50W
ES/
ESD16
9 1/4"
50W
ES/
ESD16
7 1/2"
6 1/8"
N/A
50W
MR16
9 1/4"
50W
MR16
7 1/2"
50W
5 7/8"
ES/ESD16
50W
ES/
ESD16
6 1/8"
50W
ES/
ESD16
9 1/4"
50W
ES/
ESD16
7 1/2"
50W
MR16
6 1/8"
N/A
50W
MR16
9 1/4"
50W
MR16
7 1/2"
50W
5 7/8"
ES/ESD16
50W
ES/
ESD16
6 1/8"
50W
ES/
ESD16
9 1/4"
50W
ES/
ESD16
7 1/2"
6 1/8"
50W
MR16
6 1/8"
N/A
50W
MR16
9 1/4"
50W
MR16
7 1/2"
N/A
N/A
N/A
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
N/A
50W
MR16
9 1/4"
50W
MR16
7 5/8"
N/A
N/A
N/A
N/A
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
N/A
50W
MR16
9 1/4"
50W
MR16
7 5/8"
50W
5 7/8"
ES/ESD16
50W
ES/
ESD16
6 1/4"
50W
ES/
ESD16
9 1/4"
50W
ES/
ESD16
7 5/8"
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
N/A
50W
MR16
9 1/4"
50W
MR16
7 5/8"
50W
5 7/8"
ES/ESD16
50W
ES/
ESD16
6 1/4"
50W
ES/
ESD16
9 1/4"
50W
ES/
ESD16
7 5/8"
3 1/4"
7 1/2"
5 7/8"
N/A
405
12V
12V
12V
12V
12V
Lamps Height Lamps Height Lamps Height Lamps Height Lamps Height
Adjustable Premium 75W
5 7/8" 50W
4 5/8" 75W
6 1/8" 75W
6 1/8" 50W
9 1/4"
Die-Cast Step Baffle MR16
MR16
MR16
MR16
MR16
(p. 118)
*For electronic transformer, order item number 302MRAICEX
100
L y t e c a s t e r
101
LytePoints Low Voltage Luminaires
LytePoints 300X Series 3 3/4" Low and Line Voltage Remodelers
Classic, high-performance Specular finishes.
5 7/8"
300MRX Non-IC Remodeler (12V)
12 5/8"
New
CL – Clear Specular
BA – Black Specular
GD – Gold Specular
MR16 (12V)
CCD – Clear Diffuser
•
•
•
•
•
•
Add flair with decorative glass options.
Measurement: 5 7/8" deep
Integral 50W magnetic transformer
Thermally protected
Damp or wet location rated depending on trim used
Designed to permit wiring from below the ceiling line
UL/CSA certified for through branch circuit wiring
FG – White
Frosted Glass
AM – Amber Glass
CB – Cobalt
Blue Glass
5 7/8"
300ESX Non-IC Remodeler (120V)
14"
ES/ESD16 (120V)
LytePoints low-voltage and line-voltage luminaries
represent the ultimate in small aperture downlighting.
They are designed to deliver superior performance,
maximum versatility and fast, easy installation. A diverse
selection of trims and finishes combined with universal
frame-in kits, with magnetic or electronic transformers,
offer the perfect lighting solution for virtually every
application. From fully adjustable accent lights to
wet location and decorative luminaries, LytePoints
provides the tools to help you realize the full potential of
your design.
• Measurement: 5 7/8" deep
• Accepts most 3 3/4" trims
• Power pack designed for 50W ES/ESD16 halogen lamps
(no transformer)
• Thermally protected
• Damp or wet location rated depending on trim used
• Designed to permit wiring from below the ceiling line
• UL/CSA certified for through branch circuit wiring
New, bold monochrome finishes for special design statements.
AL – Aluminum Paint
RW – Rosewood
GR – Graphite
SL – Steel
3401MREX Non-IC Low-Profile Electronic Remodeler (12V)
Choose from new shades, exciting dual-tone designs and other popular finishes.
4 5/8"
The LytePoints Series is at the center of Lightolier’s
efforts to provide elegant, installation friendly small
aperture luminaires. Ranging from accent lights
to shower lights to models with decorative glass,
LytePoints is suitable for most residential, commercial
and office lighting applications.
300 Series
Remodel frame-in kits are designed for mounting in
existing ceilings from below. Choose from three different
models based on clearance or transformer requirements.
• Low-voltage MR16 or line-voltage ES16
• Vertically mounted transformers dramatically
reduce noise
• Steel enclosure for added strength and durability
• Patented mounting clips provide secure mounting in
ceilings from 1/8" to 1" thick, eliminating sagging
trims and call-backs
• Integral 3/8" wide flange allows more room for error
when cutting opening
10 1/2"
MR16 (12V)
WH – White
BK – Black
GY – Silver Grey
•
•
•
•
•
•
•
•
CM – Chrome
Measurement: 4 5/8" deep
Suitable for 300X & 400X Series
Integral electronic transformer (50W max.)
Thermally protected
Swivel junction box for low plenum spaces
Damp or wet location rated depending on trim used
Designed to permit wiring from below the ceiling line
Certified for chain wiring
303MRE Non-IC Ultra-Shallow Electronic Remodeler (12V)
SB – Satin Brass
AB – Antique Brass
ST – Stainless Steel
3 1/4"
GK – 24K Gold Plated
MR16 (12V)
•
•
•
•
•
•
•
•
11
31
3/8
"
/2"
The pivot-action design of the 3401MREX and 303MRE
facilitates installation in ceilings with limited plenum
clearance.
Measurement: 3 1/4" deep
Integral electronic transformer (37W max.)
Thermally protected
Swivel junction box for low plenum spaces
Suited to trims 313/315/316/317/373 and 378 only
Designed to permit wiring from below the ceiling line
Certified for chain wiring
Certified for wall mounting application with 378 Series
Trim using a 37W MR16 lamp
Frame heights include trim cylinder.
102
L y t e c a s t e r
103
LytePoints 300X Series 3 3/4" Low and Line Voltage Frame-In Kits
LytePoints 300X Series 3 3/4" Low and Line Voltage Frame-In Kits
302MRIC9X IC Frame-In Kit (12V)
302MRX Non-IC Frame-In Kit (12V)
MR16 (12V)
302 and 304 Series
New construction frame-in kits are designed for
mounting prior to ceiling installation.
• Available for insulated and non-insulated ceilings
• Low-voltage MR16 or line-voltage ES16
• UL listed for through-branch circuit wiring
• Factory-installed trim enclosure simplifies installation
• Vertically mounted magnetic transformer dramatically
reduces noise
• Vertical adjustment from below to accommodate
from 1/8" to 1" thick ceilings
•
•
•
•
•
•
•
•
MR16 (12V)
Integral magnetic transformer for 50W MR16 maximum
For all 300 trim series
Rugged mounting system with 13" heavy gauge mounting bars that extend to 27"
Integral cable clamps
Internal thermal cut-out insures against overheating due to incorrect lamping
UL/CSA certified for through branch circuit wiring
Vapor barrier extender accessory available for AirSeal® installation (see p. 131)
Mounting bar locking clips included
•
•
•
•
•
•
Rugged mounting system with 13" heavy gauge mounting bars that extend to 27"
Integral cable clamps
UL/CSA certified for through branch circuit wiring
Integral 50W magnetic transformer with built-in thermal protection
New mounting bar locking clips included
Damp or wet location rated depending on trim used
302MREX Non-IC Frame-In Kit (12V)
302MRAICX AirSeal IC Frame-In Kit (12V)
®
7-5/8
302 Series
New construction frame-in kits are designed for
mounting prior to ceiling installation.
• Available for insulated and non-insulated ceilings
• Low-voltage MR16 or line-voltage ES16
• UL listed for through-branch circuit wiring
• Factory-installed trim enclosure simplifies installation
• Vertically mounted magnetic transformer dramatically
reduces noise
• Vertical adjustment from below to accommodate
from 1/8" to 1" thick ceilings
MR16 (12V)
MR16 (12V)
15-1/4
• Integral magnetic transformer for 50W MR16 maximum
• For all 300 trim series
• Mounting bars pivot for easy attachment and wiring in below ceiling line. Extend
to accommodate up to 24" o.c. joist spacing.
• Integral nails
• Integral cable clamps
• Internal thermal cut-out insures against overheating due to incorrect lamping
• Mounting bar locking screw on one side of the frame-in-kit
•
•
•
•
•
•
•
Rugged mounting system with 13" heavy gauge mounting bars that extend to 27"
Integral cable clamps
UL/CSA certified for through branch circuit wiring
Integral 50W electronic transformer with built-in thermal protection
New mounting bar locking clips included
Damp or wet location rated depending on trim used
277v version (302MREX277) available. Consult factory.
302ESX Non-IC Frame-In Kit (120V)
302ESAICX AirSeal IC Frame-In Kit (120V)
®
7-5/8
ES/ESD16 (120V)
15-1/4
ES/ESD16 (120V)
•
•
•
•
•
Rugged mounting system with 13" heavy gauge mounting bars that extend to 27"
Integral cable clamps
Internal thermal cut-out insures against overheating due to incorrect lamping
UL/CSA certified for through branch circuit wiring
Vapor barrier extender accessory available for AirSeal® installation for 24" o.c.
joist (see p. 131)
• New mounting bar locking clips included
• Mounting bars pivot for easy attachment and wiring in below ceiling line. Extend
to accommodate up to 24" o.c. joist spacing.
• Integral nails
• Integral cable clamps
• Internal thermal cut-out insures against overheating due to incorrect lamping
• Mounting bar locking screw on one side of the frame-in-kit
302ESICX IC Frame-In Kit (120V)
302MRIC7X IC Frame-In Kit (12V)
MR16 (12V)
ES/ESD16 (120V)
•
•
•
•
•
•
No vertical adjustments required.
Patented design installs flush every time.
•
•
•
•
•
•
Rugged mounting system with 13" heavy gauge mounting bars that extend to 27"
Integral cable clamps
Internal thermal cut-out insures against overheating due to incorrect lamping
UL/CSA certified for through branch circuit wiring
Vapor barrier extender accessory available for AirSeal® installation (see p. 131)
Mounting bar locking clips included
Integral magnetic transformer for 50W MR16 maximum
Rugged mounting system with 13" heavy gauge mounting bars that extend to 27"
Integral cable clamps
UL/CSA certified for through branch circuit wiring
Mounting bar locking clips included
Accepts 304, 305, 313, 372, 378 Series Trims
Frame heights include trim cylinder.
104
L y t e c a s t e r
105
LytePoints 300X Series
LytePoints 300X Series
Adjustable Premium Specular Cone ✰✰✰
Adjustable Premium Cone ✰✰✰
304baX Specular black
cone and white
flange
3 3/4"
304clX Specular clear
cone and white
flange
CL
304gdX Specular gold
cone and white
flange
Accent light with Specular cone offers non-glare optics for
added visual comfort. Recessed lamp rotates 360° horizontally and 35° vertically, can be aimed without removing
trim. Accommodate all ceiling type from 1/8" to 1" thick.
304CCDX Clear diffuse
cone and white
flange
Non-IC Remodeler
300MRX
50W
MR16
300ESX
3401MREX
50W
ES/ESD16
50W
MR16
303MRE
Cones/Baffles
Open Downlights provide superior performance for
general lighting applications requiring greater lumen
output.
50W
MR16
302MRIC9X
SLP
302MREX
50W
MR16
50W
ES/ESD16
302MRAICX
50W
MR16
302ESAICX
Non-IC Remodeler
302ESX
300MRX
50W
ES/ESD16
50W
MR16
300ESX
3401MREX
50W
ES/ESD16
50W
MR16
Non-IC Frame-In Kit
303MRE
302MRX
N/A
302MRIC7X
50W
ES/ESD16
37W
MR16
302MRIC9X
50W
MR16
302ESX
50W
ES/ESD16
Pinhole
Small aperture accent lights conceal the light source
and provide the smallest available aperture. The Pinhole
provides consistent ceiling appearance and maximum
adjustment in a small aperture fixture.
AirSeal® IC Frame-In Kit
302ESICX
50W
MR16
302MREX
50W
MR16
IC Frame-In Kit
302MRAICEX
50W
ES/ESD16
304RWPXRosewood
reflector and
self-flange
One-piece aluminum reflector and flange for uniform look.
Recessed lamp rotates 360° horizontally and 35° vertically, can be aimed without removing trim. Accommodate
all ceiling type from 1/8" to 1" thick.
AirSeal® IC Frame-In Kit
302ESICX
50W
MR16
302MRX
50W
MR16
IC Frame-In Kit
302MRIC7X
304SLPX Steel reflector
and self-flange
Non-IC Frame-In Kit
N/A
304GRPX Graphite reflector and selfflange
3 3/4"
50W
ES/ESD16
302MRAICX
50W
MR16
302MRAICEX
302ESAICX
50W
MR16
50W
ES/ESD16
Specular reflectors feature a specular, mirror-like finish
that provides greater light output.
New
BA
GD
CCD
GRP
Adjustable Premium Die-Cast Step Baffle ✰✰✰
RWP
Adjustable Pinhole ✰✰✰
305bkX
3 3/4"
305alpX
ALP
One-color luminaire features a one-piece die-cast flange
and step baffle (except 305BKX). Recessed lamp rotates
360° horizontally and 35° vertically, can be aimed without
removing trim. Accommodate all ceiling type from 1/8"
to 1" thick.
Black step
baffle and
white flange
Aluminum
painted step
baffle and
self-flange
305whwX White step
baffle and
self-flange
308bkX Black faceplate
and baffle
AL
308wwX White faceplate
and baffle
Tiny aperture accent light. Easy relamping and aiming permits up to 30° vertical and 360° horizontal adjustments.
Accommodate all ceiling type from 1/8" to 1" thick.
Non-IC Remodeler
Non-IC Remodeler
300MRX
50W
MR16
300ESX
3401MREX
50W
ES/ESD16
50W
MR16
Non-IC Frame-In Kit
303MRE
302MRX
N/A
50W
MR16
302MREX
50W
MR16
300MRX
302ESX
50W
ES/ESD16
50W
MR16
300ESX
3401MREX
50W
ES/ESD16
42W
MR16
Non-IC Frame-In Kit
303MRE
302MRIC7X
50W
MR16
50W
MR16
BK
106
302MRIC9X
AirSeal® IC Frame-In Kit
302ESICX
50W
ES/ESD16
WHW
302MRAICX
50W
MR16
302ESAICX
50W
ES/ESD16
302MRAICEX
302MRIC7X
N/A
302MRIC9X
50W
MR16
50W
MR16
BK
302MRX
N/A
IC Frame-In Kit
IC Frame-In Kit
308alX Aluminum
painted faceplate
and baffle
3 3/4"
50W
MR16
302MREX
50W
MR16
302ESX
50W
ES/ESD16
AirSeal® IC Frame-In Kit
302ESICX
50W
ES/ESD16
302MRAICX
37W
MR16
302MRAICEX
50W
ES/ESD16
302ESAICX
N/A
WW
L y t e c a s t e r
107
LytePoints 300X Series
LytePoints 300X Series
Cross Blade ✰✰✰
Slot Aperture ✰✰✰
New
3 3/4"
372CHX
Chrome Cross Blade
372wMX
White Cross Blade
CH
WH
Crafted for performance, the cross blade provides optimal
shielding of the lamp source for exceptional visual comfort
without sacrificing performance.
50W
MR16
300ESX
50W
ES/ESD16
3401MREX
50W
MR16
50W
MR16
302MRIC9X
50W
MR16
Antique brass
309sbX
Satin brass
309bkX
Black
309stX
Stainless steel
309whX White
309gkX
24k gold plated
Non-IC Frame-In Kit
303MRE
302MRX
N/A
302MREX
50W
MR16
IC Frame-In Kit
302MRIC7X
309abX
309cmX Chrome
Small aperture accent light. Lampholder rotates 360°
horizontally and 40° vertically. Inner black shield reduces
glares. Thin faceplate reduces flash from lamp on edges.
Accommodate all ceiling type from 1/8" to 1" thick.
4 1/2"
Non-IC Remodeler
300MRX
3 3/4"
50W
MR16
Non-IC Remodeler
302ESX
50W
ES/ESD16
300MRX
50W
MR16
300ESX
50W
ES/ESD16
Non-IC Frame-In Kit
3401MREX
303MRE
42W
MR16
302MRX
N/A
302MREX
50W
MR16
50W
MR16
Slot Aperture
Small aperture accent lights conceal the light source
and provide the smallest available aperture. The Slot
provides consistent ceiling appearance and maximum
adjustment in a small aperture fixture.
302ESX
50W
ES/ESD16
AirSeal® IC Frame-In Kit
302ESICX
50W
ES/ESD16
302MRAICX
50W
MR16
302MRAICEX
IC Frame-In Kit
302ESAICX
50W
MR16
50W
ES/ESD16
302MRIC7X
N/A
302MRIC9X
50W
MR16
WH
AirSeal® IC Frame-In Kit
302ESICX
302MRAICX
50W
ES/ESD16
37W
MR16
302MRAICEX
37W
MR16
Recessed Adjustable Mini-Swivel
These miniature low voltage accent lights feature the
versatile MR16 and ES16 light sources to dramatically
highlight paintings, artwork and other objects while
carefully blending into the ceiling.
• Recessed Adjustable provides high impact accent
lighting in a variety of aperture finishes. “Hot aiming”
allows the fixture to be adjusted while on.
• Elegantly-styled Mini Swivels sit flush with the
ceiling.
302ESAICX
N/A
Basic Adjustable Cone ✰✰
New
3 3/4"
384CHX
Chrome Cone
384BSX
Brass Cone
AB
BK
CM
GK
SB
ST
CH
This addition to the line compliments our basic cone
series with the flexibility of a 45º adjustment. Exceptional
performance at a value added cost.
3 3/4"
Non-IC Remodeler
300MRX
50W
MR16
300ESX
50W
ES/ESD16
3401MREX
50W
MR16
Non-IC Frame-In Kit
303MRE
302MRIC7X
302MRIC9X
50W
MR16
302MRX
N/A
IC Frame-In Kit
N/A
Adjustable Gimbal Ring ✰✰
4 1/2"
50W
MR16
302ESICX
302MRAICX
50W
MR16
302MRAICEX
50W
MR16
313alX
Aluminum paint
313sbX
Satin brass
WH
Lamp sits flush with the ceiling. Adjustable up to 30° for
accent lighting to a vertical surface and 360° horizontally.
The industry leader, offering the easiest and fastest
installation with rear lamping and patented spring clips.
Accommodate all ceiling type from 1/8" to 1" thick.
302ESAICX
50W
ES/ESD16
BS
300MRX
385WHX
White Phenolic
Baffle and White
Flange
385BKX
Black Phenolic
Baffle and White
Flange
3 3/4"
BK
This addition to the line compliments our basic cone
series with the flexibility of a 45º adjustment. Exceptional
performance at a value added cost.
50W
MR16
300ESX
50W
ES/ESD16
3401MREX
50W
MR16
302MRIC7X
302MRIC9X
50W
MR16
313whX White
Non-IC Frame-In Kit
3401MREX
50W
MR16
303MRE
50W
MR16
302MRIC9X
50W
MR16
302MRX
37W
MR16
IC Frame-In Kit
302MRIC7X
Stainless steel
50W
MR16
302MREX
50W
MR16
302ESX
N/A
AirSeal® IC Frame-In Kit
302ESICX
N/A
302MRAICX
50W
MR16
302MRAICEX
50W
MR16
302ESAICX
N/A
Non-IC Frame-In Kit
303MRE
302MRX
N/A
IC Frame-In Kit
N/A
N/A
Black
313stX
4 1/2"
Non-IC Remodeler
300MRX
50W
MR16
300ESX
313bkX
313cmX Chrome
Non-IC Remodeler
Basic Adjustable Baffle ✰✰
New
24k gold plated
302ESX
AirSeal® IC Frame-In Kit
N/A
Antique brass
313gkX
50W
ES/ESD16
302MREX
50W
MR16
313abX
50W
MR16
302MREX
50W
MR16
302ESX
50W
ES/ESD16
AB
AL
BK
CM
GK
SB
ST
AirSeal® IC Frame-In Kit
302ESICX
50W
ES/ESD16
302MRAICX
50W
MR16
302MRAICEX
50W
MR16
302ESAICX
50W
ES/ESD16
WH
108
L y t e c a s t e r
109
LytePoints 300X Series
LytePoints 300X Series
Adjustable Premium Die-Cast Step Baffle ES/ESD16 ✰
Elbow ✰✰
325BKX
3 3/4"
Black step
baffle and
white flange
325whWX White step
baffle and
white flange
BK
Fully adjustable accent lights with step baffle. Lamp
rotates 360° horizontally and 35° vertically, can be aimed
without removing trims. Front relamping for ES/ESD16
lamp. Accommodate all ceiling type from 1/8" to 1" thick.
Non-IC Remodeler
300MRX
N/A
300ESX
50W
ES/ESD16
N/A
303MRE
302MRX
N/A
302MREX
N/A
N/A
WH
300ESX
50W
MR16
50W
ES/ESD16
Premium Baffle
Baffle provides excellent glare control at the ceiling line.
The adjustable recessed lamp provides a good cutoff
resulting in excellent performance and visual comfort.
IC Frame-In Kit
302MRIC7X
N/A
AirSeal IC Frame-In Kit
302MRIC9X
N/A
302ESICX
50W
ES/ESD16
302MRAICX
N/A
302ESAICX
50W
ES/ESD16
Gold plated
378STX
Stainless steel
Non-IC Frame-In Kit
3401MREX
N/A
303MRE*
50W
MR16
37W
MR16
IC Frame-In Kit
®
Black
378GKX
Versatile accent light utilizing miniature low voltage MR16
lamps. Elbow adjusts up to 70° vertically and 360°
horizontally for focal lighting. Retracts to provide fully
recessed downlight. Accommodate all ceiling type from
1/8" to 1" thick. Certified for wall mounting application
with 303 MRE using a 37W MR16 Lamp.
300MRX
302ESX
378BKX
378WHX White
Non-IC Remodeler
Non-IC Frame-In Kit
3401MREX
3 3/4"
302MRIC7X
302MRIC9X
37W
MR16
37W
MR16
302MRX
302MREX
50W
MR16
50W
MR16
302ESX
N/A
AirSeal® IC Frame-In Kit
302ESICX
N/A
302MRAICX 302MRAICEX 302ESAICX
50W
MR16
50W
MR16
N/A
GK
* Certified for wall mounted applications.
ST
BK
Wall Washer / Shield ✰✰
315WHX White
3 3/4"
WHW
3 3/4"
330abX
Antique brass
330alX
Aluminum paint
330bkX
Black
330gkX
Pivoting Gimbal ring houses ES/ESD16 lamps close to the
opening. Features front relamping. The lamp adjusts 20°
vertically and 360° horizontally. Accommodate all ceiling
type from 1/8" to 1" thick.
300ESX
50W
ES/ESD16
330sbX
Satin brass
330stX
Stainless steel
300MRX
300ESX
50W
MR16
Non-IC Frame-In Kit
3401MREX
50W
ES/ESD16
303MRE
50W
MR16
37W
MR16
N/A
302MRIC9X
50W
MR16
302MREX
50W
MR16
IC Frame-In Kit
302MRIC7X
302MRX
50W
MR16
302ESX
50W
ES/ESD16
AirSeal® IC Frame-In Kit
302ESICX
50W
ES/ESD16
302MRAICX
50W
MR16
302MRAICEX
50W
MR16
302ESAICX
50W
ES/ESD16
ST
Non-IC Frame-In Kit
3401MREX
N/A
24K gold plated
330whX White
Non-IC Remodeler
303MRE
N/A
302MRX
N/A
302MREX
N/A
302ESX
Contour (Wet Location) ✰✰
50W
ES/ESD16
316ALX
3 3/4"
IC Frame-In Kit
302MRIC7X
N/A
302MRIC9X
N/A
AirSeal IC Frame-In Kit
®
302ESICX
50W
ES/ESD16
302MRAICX
N/A
302ESAICX
WH
50W
ES/ESD16
AL
BK
CM
GK
SB
ST
300MRX
50W
MR16
300ESX
Chrome
316GKX
24K gold plated
316WHX
White
50W
ES/ESD16
Non-IC Frame-In Kit
3401MREX
50W
MR16
302MRIC7X
302MRIC9X
N/A
50W
MR16
303MRE
37W
MR16
IC Frame-In Kit
302MRX
50W
MR16
302MREX
50W
MR16
302ESX
50W
ES/ESD16
AirSeal® IC Frame-In Kit
302ESICX
50W
ES/ESD16
302MRAICX 302MRAICEX 302ESAICX
50W
MR16
50W
MR16
50W
ES/ESD16
cm
110
Aluminum paint
316CMX
Simple contoured architectural flange for unique new
appearance. Specially designed for task areas and wet
locations such as showers. Gasket included for shower
applications, can be removed. Accommodate all ceiling
type from 1/8" to 1" thick.
Non-IC Remodeler
AB
Stainless steel
Fixture offers dual function. First as a wall washer with
the lamp aimed at the shield so that the light will nicely
reflect uniformly on the wall surface (use frosted protective glass included). The second function is as a shielded
accent light providing 30° vertical adjustment particularly
effective along walls (use clear protective glass included).
Accommodate all ceiling type from 1/8" to 1" thick.
Non-IC Remodeler
330cmX Chrome
WH
N/A
315STX
WH
Gimbal ES/ESD16 ✰
300MRX
Wall Washing
These reflectors provide high quality wall washing for
residential and light commercial environments. Designed
to emphasize the vertical plane, they are an excellent
way to make small rooms appear more spacious.
GK
al
L y t e c a s t e r
111
LytePoints 300X Series
LytePoints 300X Series
Frosted Glass Wet Location ✰✰✰
Shower Light (Wet Location) ✰✰✰
New
3777WHXWhite frosted
glass and white
flange
3 3/4"
377CHX White frosted
glass and
chrome flange
CM
UL listed for wet location applications, the 377 series
provides up to 50 watt MR16 lamping for exceptional
performance with a simple and elegant styling suitable for
any application.
4 1/2"
Non-IC Remodeler
300MRX
50W
MR16
300ESX
N/A
3401MREX
50W
MR16
Enclosed (Wet Location)
These enclosed downlights bring light to food service
areas, wet locations and other spaces where exposed
light sources are prohibited or not desired. They are
also an excellent solution for dirt-prone areas where a
completely shielded light source is needed.
N/A
302MRIC9X
50W
MR16
302MRX
N/A
IC Frame-In Kit
302MRIC7X
WH
Simple architectural flange with glass diffuser for a new
appearance. Specially designed for wet locations such as
showers (gasket included). Accommodate all ceiling type
from 1/8" to 1" thick.
Non-IC Remodeler
Non-IC Frame-In Kit
303MRE
302MREX
50W
MR16
50W
MR16
302ESX
300MRX
50W
MR16
N/A
N/A
302MRAICX
50W
MR16
302MRAICEX
50W
MR16
300ESX
N/A
Non-IC Frame-In Kit
3401MREX
50W
MR16
303MRE
302MRIC7X
302ESAICX
N/A
N/A
WH
302MRIC9X
50W
MR16
302MRX
N/A
IC Frame-In Kit
AirSeal® IC Frame-In Kit
302ESICX
375whX White phenolic
baffle and white
flange
Mini-aperture downlight basic step baffle. Style-matched
with other line voltage step baffles. Accommodate all ceiling type from 1/8" to 1" thick.
Non-IC Remodeler
50W
ES/ESD16
3401MREX
50W
MR16
N/A
302MRIC9X
50W
MR16
302MRX
N/A
302MREX
50W
MR16
50W
MR16
N/A
302MRAICX
50W
MR16
302MRAICEX
50W
MR16
302ESAICX
N/A
Glass Cylinder ✰✰✰
373CBCmX Cobalt blue
glass and
chrome flange
AirSeal® IC Frame-In Kit
302ESICX
50W
ES/ESD16
373cbwhX Cobalt blue
glass and
white flange
FGWH
373fgcmX White frosted
glass and
chrome flange
Design using a built-in decorative element. Beautiful
glass ring with open center. Soft diffusion for a smooth
beam pattern. Accommodate all ceiling type from 1/8"
to 1" thick.
302ESX
50W
ES/ESD16
302MRAICX
50W
MR16
302MRAICEX
50W
MR16
373fgwhX White frosted
glass and
white flange
Non-IC Remodeler
300MRX
50W
MR16
302ESAICX
300ESX
50W
ES/ESD16
Non-IC Frame-In Kit
3401MREX
50W
MR16
303MRE
302MRIC7X
bk
N/A
302MRIC9X
50W
MR16
302MRX
37W
MR16
IC Frame-In Kit
50W
ES/ESD16
Open Cone
Specular finish offers excellent performance for general
downlighting.
AirSeal® IC Frame-In Kit
302ESICX
Non-IC Frame-In Kit
303MRE
IC Frame-In Kit
302MRIC7X
302ESX
N/A
375bkX Black phenolic
baffle and white
flange
WH
50W
MR16
50W
MR16
3 3/4"
3 3/4"
300ESX
302MREX
50W
MR16
Basic Baffle ✰✰
300MRX
376whX White frosted
glass and white
flange
3 3/4"
50W
MR16
302MREX
50W
MR16
302ESX
50W
ES/ESD16
AirSeal® IC Frame-In Kit
302ESICX
50W
ES/ESD16
302MRAICX
50W
MR16
302MRAICEX
50W
MR16
302ESAICX
50W
ES/ESD16
Basic Cone ✰✰
374CHX Chrome and
white flange
3 3/4"
374BSX Brass and white
flange
FGcm
CH
CBWH
CBCM
Mini-aperture accent lights with basic chrome or brass
cone. Recessed lamp provides excellent shielding.
Accommodate all ceiling types from 1/8" to 1" thick.
Non-IC Remodeler
300MRX
50W
MR16
300ESX
50W
ES/ESD16
3401MREX
50W
MR16
Non-IC Frame-In Kit
303MRE
N/A
IC Frame-In Kit
302MRIC7X
N/A
302MRIC9X
50W
MR16
302MRX
50W
MR16
302MREX
50W
MR16
302ESX
50W
ES/ESD16
AirSeal® IC Frame-In Kit
302ESICX
50W
ES/ESD16
302MRAICX
50W
MR16
302MRAICEX
50W
MR16
302ESAICX
50W
ES/ESD16
bs
112
L y t e c a s t e r
113
LytePoints 300X Series
LytePoints 300X Series
Residence Disk ✰✰
317FGALX Poly-carbonate
ring and aluminum painted
faceplate
3 3/4"
FGAL
Beautiful ring with open centre. It has a nice impact on
light by softening the outer light beam of the MR16 or the
new ES/ESD16. Accommodate all ceiling type from 1/8"
to 1" thick.
Non-IC Remodeler
300MRX
50W
MR16
300ESX
50W
ES/ESD16
3401MREX
50W
MR16
Non-IC Frame-In Kit
303MRE
302MRX
37W
MR16
IC Frame-In Kit
LytePoints Decorative Elements
These elegant fixtures create visually expressive
downlighting by combining functional illumination
with decorative design. The effect is unique: the
light is smooth, the light source is well hidden, and
the decorative elements are elegantly scaled with
beautiful detail.
302MRIC7X
N/A
50W
MR16
302ESX
50W
ES/ESD16
AirSeal® IC Frame-In Kit
302MRIC9X
50W
MR16
302MREX
50W
MR16
302ESICX
50W
ES/ESD16
302MRAICX
50W
MR16
302MRAICEX
302ESAICX
50W
MR16
50W
ES/ESD16
Rounded Glass ✰✰
322AMX Amber glass
3 3/4"
322CBX Cobalt blue glass
322FGX White frosted
glass
FG
Miniature decorative trim. Soft diffusion for a smooth
beam pattern. Choice of three decorative glass colors.
Accommodate all ceiling type from 1/8" to 1" thick.
Non-IC Remodeler
300MRX
50W
MR16
300ESX
N/A
3401MREX
50W
MR16
Non-IC Frame-In Kit
303MRE
N/A
IC Frame-In Kit
302MRIC7X
N/A
50W
MR16
am
114
302MRIC9X
302MRX
50W
MR16
302MREX
50W
MR16
302ESX
N/A
AirSeal® IC Frame-In Kit
302ESICX
N/A
302MRAICX
50W
MR16
302MRAICEX
50W
MR16
302ESAICX
N/A
CB
L y t e c a s t e r
115
LytePoints 400X Series 4 3/4" Aperture Downlights
LytePoints 400X Series
400MRX Lytecaster Non-IC Remodeler
MR16 (12V)
•
•
•
•
•
•
•
The 400X Series: A wide range of appealing downlights suited to most residential, commercial and office lighting applications.
12
Measurement: 5 7/8" deep
5/8
"
Integral 75W maximum magnetic transformer
Thermally protected
Damp or wet location rated depending on trim used
Designed to permit wiring from below the ceiling line
Patented Residence mounting clips
Certified for chain wiring
5 7/8"
The LytePoints 400X Series brings together a variety of stylish, installation-friendly small
aperture luminaires offering superior lighting performance. Their universal framing system
makes for totally interchangeable trims. With MR16 lamping up to 75 watts, they are ideal
for larger spaces and higher ceilings. Some models feature exceptional adjustability: Eyeball
and Elbow enable vertical accent lighting adjustments up to 45° and 85° respectively. The
400X Series also provides exciting design opportunities with the all-new OVNI family of
elegantly shaped downlights.
MR16 (12V)
•
•
•
•
•
•
•
•
•
Fully adjustable accent light with specular
cone that offers non-glare optics for added
visual comfort.
Measurement: 4 5/8" deep
10 1/2"
Suitable for 300X & 400X Series
Integral 50W maximum electronic transformer
Thermally protected
Swivel junction box for low plenum spaces
Damp or wet location rated depending on trim used
Designed to permit wiring from below the ceiling line
Patented Residence mounting clips
Certified for chain wiring
4 5/8"
3401MREX Lytecaster Non-IC Low-Profile Electronic Remodeler
400 Series
LytePoints 400 Series low-voltage luminaries represent
the ultimate in high-performance small aperture
downlighting. With adjustability up to 85° and MR16
lamping up to 75 watts, they are ideal for larger spaces
and higher ceilings.
402MRX Lytecaster Non-IC Frame-In Kit
MR16 (12V)
• Integral 75W maximum
magnetic transformer
• Rugged mounting system with 13" heavy
gauge mounting bars that extend 27"
• Snap-off junction box covers
• Integral cable clamps
• UL/CSA certified for through branch circuit wiring
• Mounting bar locking clips included
• Damp or wet location rated depending on trim used
The adjustable downlight
Elbow sports a new design.
402MREX Lytecaster Non-IC Frame-In Kit
MR16 (12V)
• Rugged mounting system with 13" heavy
gauge mounting bars that extend to 27"
• Integral cable clamps
• UL/CSA certified for through branch circuit wiring
• Integral 75W electronic transformer with built-in thermal protection
• Mounting bar locking clips included
• Damp or wet location rated depending on trim used
• Accommodates all ceilings 1/8" to 1" thick
• 277v version (402MREX277) available. Consult factory
All-new OVNI downlights made of
composite materials add a modern
look, in silver grey or white.
402MRIC9X Lytecaster IC Frame-In Kit
MR16 (12V)
A forgiving flange allows no-hassle retrofits
from a standard 4" electrical junction box to a
400X Series recessed downlight.
Frame heights include trim cylinder.
116
• Snap-off junction box covers
• Rugged mounting system with 13" heavy
gauge mounting bars that extend to 27"
• Integral magnetic transformer for
50W MR16 maximum
• Integral cable clamps
• Internal thermal cut-out insures against
overheating due to incorrect lamping
• UL/CSA certified for through branch circuit wiring
• Vapor barrier extender accessory available for airtight
installation for 24" o.c. joists (see p. 131)
• Mounting bar locking clips included
L y t e c a s t e r
117
LytePoints 400X Series
LytePoints 400X Series
Adjustable Specular Cone ✰✰✰
Slot ✰✰✰
404baX Specular black
cone and white
flange
4 3/4"
404cCDX Clear diffuse
cone with white
flange
CL
Fully adjustable accent light with Specular cone that
offers non-glare optics for added visual comfort.
Recessed lamp rotates 360° horizontally and 35°
vertically, can be aimed without removing trims.
Accommodate all ceiling type from 1/8" to 1" thick.
Offering higher wattages, the LytePoints 400 Series
provides greater lumen output and flexibility.
Non-IC Remodeler
400MRX
75W
MR16
3401MREX
50W
MR16
Non-IC Frame-In-Kit
402MRX
75W
MR16
402MREX
75W
MR16
404clX Specular clear
cone and white
flange
404gdX Specular gold
cone and white
flange
402MRIC9X
409wHX White
409STX Stainless Steel
WH
Non-IC Remodeler
3401MREX
50W
MR16
Non-IC Frame-In-Kit
402MRX
75W
MR16
402MREX
75W
MR16
IC Frame-In-Kit
402MRIC9X
50W
MR16
wh
BA
GD
CCD
Adjustable Premium Die-Cast Step Baffle ✰✰✰
409MTX Metal
5 1/2"
Elegant mini-eyeball for accent lighting, rotates
360° horizontally and adjusts 45° vertically. Onepiece housing with black or white premium step baffle. Eyeball faceplate snaps out for easy relamping.
Accommodate all ceiling type from 1/8" to 1" thick.
75W
MR16
50W
MR16
4 3/4"
409SBX Satin Brass
400MRX
IC Frame-In-Kit
409BKX Black
New
SB
4 3/4"
405bkX Black step baffle
and white flange
405whX White step baffle
and white flange
BK
Fully adjustable premium accent step baffle features regressed lamp for maximum glare control.
Recessed lamp rotates 360° horizontally and 35°
vertically, can be aimed without removing trims.
Accommodate all ceiling type from 1/8" to 1" thick.
Non-IC Remodeler
400MRX
75W
MR16
3401MREX
50W
MR16
Non-IC Frame-In-Kit
402MRX
75W
MR16
402MREX
75W
MR16
BK
Versatile accent light utilizing miniature low voltage MR16
lamps. Elbow adjusts up to 85° vertically and 360°
horizontally for focal lighting. Retracts to provide fully
recessed downlight. Accommodate all ceiling type from
1/8" to 1" thick.
Non-IC Remodeler
75W
MR16
402MRIC9X
50W
MR16
413BKX
Black
413stX
Stainless steel
Adjustable Accents
These miniature low voltage accent lights feature the
versatile MR16 light source to dramatically highlight
paintings, artwork and other objects while carefully
blending into the ceiling.
413whX White
400MRX
IC Frame-In-Kit
MT
Gimbal ✰✰✰
New
4 3/4"
ST
3401MREX
50W
MR16
Non-IC Frame-In-Kit
402MRX
75W
MR16
402MREX
75W
MR16
413SBX
Satin Brass
413MTX
Metal
5 1/2"
IC Frame-In-Kit
402MRIC9X
50W
MR16
wh
wh
SB
ST
MT
Elbow ✰✰
Eyeball ✰✰✰
4 3/4"
406wwX White Eyeball
and step baffle
WH
Elegant mini-eyeball for accent lighting, rotates
360° horizontally and adjusts 45° vertically. Onepiece housing with black or white premium step baffle. Eyeball faceplate snaps out for easy relamping.
Accommodate all ceiling type from 1/8" to 1" thick.
Non-IC Remodeler
400MRX
75W
MR16
3401MREX
50W
MR16
Non-IC Frame-In-Kit
402MRX
75W
MR16
402MREX
75W
MR16
ST
400MRX
50W
MR16
Black
478GKX
Gold plated
478stX
Stainless steel
478whX White
Non-IC Remodeler
402MRIC9X
478BKX
Versatile accent light utilizing miniature low voltage MR16
lamps. Elbow adjusts up to 85° vertically and 360°
horizontally for focal lighting. Retracts to provide fully
recessed downlight. Accommodate all ceiling type from
1/8" to 1" thick.
IC Frame-In-Kit
75W
MR16
ww
118
4 3/4"
406whX White Eyeball
and black step
baffle
3401MREX
50W
MR16
Non-IC Frame-In-Kit
402MRX
75W
MR16
402MREX
75W
MR16
IC Frame-In-Kit
402MRIC9X
50W
MR16
GK
WH
BK
L y t e c a s t e r
119
LytePoints 400X Series
LytePoints 400X Series
OVNI Adjustable ✰✰✰
452whX White flange and
black baffle
4 3/4"
452gyX Silver grey baffle
and flange
GY
New innovative styling offering a decorative look with up
to 30° vertical adjustability using ratchet feature and a
recessed phenolic verti-groove baffle hiding the lamp.
Accommodate all ceiling type from 1/8" to 1" thick.
Non-IC Remodeler
400MRX
50W*
MR16
3401MREX
50W*
MR16
Non-IC Frame-In-Kit
402MRX
50W*
MR16
402MREX
50W*
MR16
IC Frame-In-Kit
402MRIC9X
50W*
MR16
WH
*Shielded lamp only
OVNI
OVNI 400 Series provides eye catching decorative
elements and unique functionality.
OVNI Matrix ✰✰✰
450whX White
4 3/4"
450gyX
Silver grey
GY
New innovative styling offering a decorative look with a
round shape. Matrix detail in the centre provides good
glare control. Accommodate all ceiling type from 1/8" to
1" thick.
Non-IC Remodeler
400MRX
50W*
MR16
3401MREX
50W*
MR16
Non-IC Frame-In-Kit
402MRX
50W*
MR16
402MREX
50W*
MR16
IC Frame-In-Kit
402MRIC9X
50W*
MR16
WH
*Shielded lamp only
OVNI Luna ✰✰✰
451whX White
4 3/4"
451gyX
Silver grey
GY
New innovative styling offering a decorative look with
a rounded opal glass floating in the middle of the trim.
Accommodate all ceiling type from 1/8" to 1" thick.
Non-IC Remodeler
400MRX
50W*
MR16
3401MREX
50W*
MR16
*Shielded lamp only
120
Non-IC Frame-In-Kit
402MRX
50W*
MR16
402MREX
50W*
MR16
IC Frame-In-Kit
402MRIC9X
50W*
MR16
WH
L y t e c a s t e r
121
LytePoints Linear
LytePoints Linear Single-Unit Faceplates
LytePoints Linear
Extends Lighting
Design Options of
4 3/4" Series
Let Your Imagination Light The Way!
Discover the endless interior design possibilities of Decorative Single and Multi-Unit Faceplates for LytePoints 3 3/4" and 4 3/4" Series.
These visually appealing downlights combine the elegance of downlighting and the flexibility of made-to-measure ceiling patterns.
Another innovative idea by Lightolier for your home or business.
•Flexible solution for retail
outlets, offices, homes, etc.
•Attractive and functional
low-voltage MR16 halogen
lighting – lamping up to 75W.
LytePoints Linear luminaires complement our
existing line of LytePoints fixtures. This new
offering is designed for made-to-measure ceiling
patterns using our 3 3/4" & 4 3/4" Series Trims.*
•Choice of 1-, 2-, 3- and
4-lamp Linear, and 4-lamp
Square Faceplates.
* 3 3/4" compatible with single unit plates only.
Aesthetic
Visually Appealing Trim Styles
LytePoints Linear downlighting is a costeffective alternative offering design elegance
and LytePoint’s trademark quality. Choose from
the existing selection of interchangeable 4 3/4"
Series Trims plus 2 New Trims: Slot Aperture
(409X) and Gimbal (413X), available in a variety
of finishes.
404CCDX (See page 118)
•Complete luminaire includes
4 3/4" Series Trims, a White
Faceplate and a Non-IC
Multi-Unit Frame-In Kit
(choice of 120V/277V).
Order each item separately.
413STX (See page 119)
Unique. Modern. Convenient.
Mix and Match Sensation
Easy-Design Templates
Decorative Faceplates breathe new life into
a space, allowing you to add a personal touch of
refinement to any decor.
Combine faceplates and trims to suit your
decoration needs. Create a consistent
monochrome finish or develop a two-tone look in
line with your color scheme.
Create the pattern of your choice using linear and
diagonal templates, included with every SingleUnit faceplate. These practical templates let you
plan and integrate any number of geometric ceiling
designs. Multiple faceplate patterns require use of
Non-IC Remodeler frames given the bulkiness of
other Frame‑In Kits. Multiple unit configurations
can be achieved with our Multi-Unit products or by
combining Single-Unit models.
• Dramatic Accent: Faceplates make it easy to
transform an area, even enhance a corner.
• Interesting Alternative: Faceplate
configurations can replace pendant and surface
luminaire applications.
• The Easy-To-Install Modular System:
Modular design of Multi-Unit Series allows
for thousands of lighting combinations.
Popular Finishes
Choose from standard, easy-to-match
black or white paint finishes.
Diagonal
Pattern
Linear Pattern
Now available in the 4 3/4" Series, Slot Aperture features a
redesigned opening for superior visual comfort, whether lamps
are on or off. New black skirt minimizes view inside the slot,
reducing glare when in use and ensuring a “clean ceiling”
appearance when luminaire is off (45° adjustable).
409BKX (See page 118)
Black
Checkerboard
Pattern
White
Functional
Modular
Multiple Lighting Effects
Easy-To-Install, Easy-To-Modify
Downlighting
Unprecedented lighting versatility lets you combine
different lighting tasks in a single multi-trim
luminaire. Example: 3-Unit MR16 incorporating
accent lighting at each extremity (Elbow 478WHX)
with general lighting in center (Adjustable Comfort
Clear Diffuse Cone 404CCDX).
122
Modular design increases installation convenience
of Multi-Unit Frame-In Kits, Faceplates and 4 3/4"
Series Trims, as well as 4 3/4" Series components
in combination with Decorative Single-Unit
Faceplates.
L y t e c a s t e r
123
Modular Multi-Unit MR16
Modular Single-Unit MR16
Easy-To-Install, Easy-To-Modify Downlighting...
LytePoints Linear Modular Design Affords You The Ultimate In Flexibility And Design...
LytePoints Linear modular design affords you the ultimate in flexibility and design. The fully enclosed design blends into the ceiling to provide a clean,
unobtrusive ceiling layout while each multi-unit design can use any combination of six trims to provide over 1200 unique combinations of downlights in the
4 unit design. Completely control the amount and adjustability of light with your own unique combination... it’s as easy as 1...2...3
Our Single-Unit squares let you think “outside the box.” Designed to use our existing 3 3/4" and 4 3/4" LytePoint trims, these individual units can be placed
on the ceiling in unique patterns for functionality or fancy. Mix and match different trims for specific lighting effects. Highlight artwork while downlighting a
corner, throw alternating beams of light on a vertical surface... the possibilities are endless.
1) IC/Non-IC Single-Unit Remodeler/Frame-In Kit
1
• For continuous rows and other patterns, Non-IC Remodeler Kits
are recommended given space limitations between joists.
• Electrification can be performed before or after ceiling is up and finished;
whether for renovation projects or new constructions.
1) Non-IC Multi-Unit Frame-In Kit
1
• 120V and 277V versions.
• Accommodates all ceilings up to 2" thick.
(For details, see page 127.)
2) Decorative Single-Unit Faceplate
2
• Optional accessory ideal for custom configurations.
• Versions suited to 3 3/4" and 4 3/4" Series Trims.
• Holds firmly in place thanks to FleX clamping power (see inset).
• Total faceplate depth: only 5/16".
2) White Steel Faceplate
2
• Fully enclosed for a clean look.
• Installs securely to Frame-In Kit after finishing.
• Total faceplate depth: only 5/16".
2
3) Steel Housing/Trim
3) Interchangeable 4 3/4" Series Trims
3
• After inserting housing (included with trim) through faceplate opening,
housing flange presses up against inset lip of faceplate for a positive fit.
• Insertion/removal of trim is fast and easy thanks to specially designed
butterfly clamps featuring four snug-fitting pressure points.
• Insertion/removal of trim is fast and easy thanks to
specially designed butterfly clamps featuring four
snug-fitting pressure points.
• Steel housing provided with trim not required, to be
recycled where facilities permit.
Components can be ordered separately when required, reducing on-site clutter.
...One Trim At A Time
...Creates A Design Advantage
Thickness 5/16"
Multiple faceplate patterns require use of Non-IC Remodeler
frames given the bulkiness of other Frame-In Kits.
A
4-Unit Recessed Square
B
Dia.
2-Unit Recessed Linear
Single Faceplate
Finish Compatible Trims
All Trims except
316X & 322X Series
4 ¾" 6 ¾" 6 ¾" 400SQBK Black
400SQWH White
All Trims except
OVNI Series
FleX Clamping Power
Diagonal Pattern
124
B Cat. No. 3 ¾" 5 ¾" 5 ¾" 300SQBK Black
300SQWH White
Linear Pattern
3-Unit Recessed Linear
4-Unit Recessed Linear
A
Cut-Out Dia.
Checkerboard Pattern
FleX mounting clips on each side
of the housing ensure uniform
trim positioning and consistent
look by sandwiching the downlight
hardware to the ceiling material.
Two screw guides allow trim
cylinder to clamp down on ceilings
from 1/8" to 1" thick. No vertical
adjustments required.
L y t e c a s t e r
125
Multi-Unit 4 3/4" Series Low Voltage
Multi-Unit Frames 4 3/4" Series Low Voltage
Characteristics Common To All LytePoints Linear Frame-In Kits
Magnetic Non-IC Recessed
Linear – 2 x MR16
Linear – 3 x MR16
Linear – 4 x MR16
602WH
603WH
604WH
Square – 4 x MR16
604SQWH
Effect
404
Fixture
602MR120
602MR277
603MR120
603MR277
604MR120
604MR277
Ceiling Opening
5 3/8" x 11 1/2"
Ceiling Opening
5 3/8" x 16 7/8"
Ceiling Opening
5 3/8" x 22 1/4"
604SQMR120
604SQMR277
Ceiling Opening
11 1/2" x 11 1/2"
12V
12V
12V
12V
Description
Trim
Lamps Height
Trim
Lamps Height
Trim
Lamps Height
Trim
Lamps Height
Adjustable
Specular Cone
★★★
404BAX
404CCDX
404CLX
404GDX
75W
MR16
404BAX
404CCDX
404CLX
404GDX
75W
MR16
404BAX
404CCDX
404CLX
404GDX
75W
MR16
404BAX
404CCDX
404CLX
404GDX
75W
MR16
405BKX
405WHX
75W
MR16
405BKX
405WHX
75W
MR16
405BKX
405WHX
75W
MR16
6 3/4"
6 3/4"
6 3/4"
6 3/4"
• Accommodates all ceilings up to 2" thick.
• UL certified for through branch circuit wiring.
• Rugged 20-gauge steel construction (frame and
faceplate).
• Wing brackets facilitate vertical
frame adjustments.
602MR120 + 602WH
406
405BKX
Adjustable
Premium Die-Cast 405WHX
Step Baffle
★★★
See page 118
75W
MR16
406WHX
406WWX
75W
MR16
Eyeball
★★★
6 3/4"
6 3/4"
6 3/4"
406WHX
406WWX
75W
MR16
6 3/4"
406WHX
406WWX
75W
MR16
6 3/4"
406WHX
406WWX
6 3/4"
75W
MR16
13"
6 3/4"
7 3/8"
25" MIN.
26" MAX.
2 x MR16 (12V)
6 3/4"
603MR120 + 603WH
6 3/4"
• Damp location rated.
• 18" or 30" Mounting Bars ordered separately
(see page 131).
LytePoints Non-IC 2-Unit Linear Frame-In Kit
• Order 602WH Faceplate separately (white only).
• Choice of 120 or 277 volts.
Add suffix to catalog number (e.g. 602MR277).
• Integral 150W maximum magnetic transformer.
• Ceiling Opening: 5 3/8" x 11 1/2".
+
See page 118
405
• Torsiontite springs ensure snug fitting
faceplate edges on ceiling.
• For new construction and accessible
non-insulated ceilings.
• Meets UL requirements for thermal protection.
LytePoints Non-IC 3-Unit Linear Frame-In Kit
• Order 603WH Faceplate separately (white only).
• Choice of 120 or 277 volts.
Add suffix to catalog number (e.g. 603MR277).
• Integral 75W and 150W maximum magnetic transformers.
• Ceiling Opening: 5 3/8" x 16 7/8".
6 3/4"
+
18 5/8"
6 3/4"
6 3/4"
7 3/8"
See page 118
409
Slot Aperture
★★★
See page 118
413
Gimbal
★★
See page 119
478
Elbow
★★
409BKX
409MTX
409SBX
409STX
409WHX
65W
MR16
6 3/4"
413BKX
413MTX
413SBX
413STX
413WHX
75W
MR16
6 3/4"
478BKX
478GKX
478STX
478WHX
75W
MR16
6 3/4"
409BKX
409MTX
409SBX
409STX
409WHX
65W
MR16
6 3/4"
413BKX
413MTX
413SBX
413STX
413WHX
75W
MR16
6 3/4"
478BKX
478GKX
478STX
478WHX
75W
MR16
6 3/4"
409BKX
409MTX
409SBX
409STX
409WHX
65W
MR16
6 3/4"
413BKX
413MTX
413SBX
413STX
413WHX
75W
MR16
6 3/4"
478BKX
478GKX
478STX
478WHX
75W
MR16
6 3/4"
409BKX
409MTX
409SBX
409STX
409WHX
65W
MR16
6 3/4"
413BKX
413MTX
413SBX
413STX
413WHX
75W
MR16
6 3/4"
478BKX
478GKX
478STX
478WHX
75W
MR16
34 1/2" MIN.
37 1/8" MAX.
3 x MR16 (12V)
6 3/4"
604MR120 + 604WH
LytePoints Non-IC 4-Unit Linear Frame-In Kit
• Order 604WH Faceplate separately (white only).
• Choice of 120 or 277 volts.
Add suffix to catalog number (e.g. 604MR277).
• Integral 150W maximum magnetic transformers (2).
• Ceiling Opening: 5 3/8" x 22 1/4".
+
6 3/4"
24 3/8"
6 3/4"
7 3/8"
40" MIN.
42" MAX.
4 x MR16 (12V)
See page 119
604SQMR120 + 604SQWH
LytePoints Non-IC 4-Unit Square Frame-In Kit
• Order 604SQWH Faceplate separately (white only).
• Choice of 120 or 277 volts
Add suffix to catalog number (e.g. 604SQMR277).
• Integral 150W maximum magnetic transformers (2).
• Ceiling Opening: 11 1/2" x 11 1/2".
+
6 3/4"
13"
13"
13"
30" MIN.
32 3/4" MAX.
4 x MR16 (12V)
126
L y t e c a s t e r
127
Single-Unit
Single-Unit 3 3/4" Series Low Voltage
400SQWH/400SQBK
LytePoints Faceplate
Plate thickness: 5/16"
Thickness 5/16"
• Available in black or white.
• Compatible with the Frame-In Kits below.
• Multiple faceplate patterns require use of Non-IC Remodeler
frames (400MRX, 3401MREX) given the bulkiness of other
Frame-In Kits (for more details see below).
Non-IC Remodeler
Magnetic
400MRX
404
Fixture
12V
/ 4"
4 3/4"
Magnetic
402MRX
IC Frame-In Kit
Electronic
402MREX
Magnetic
402MRIC9X
406
Magnetic
302MRX
Electronic
302MREX
Magnetic
302MRIC7X
Magnetic
302MRIC9X
Magnetic
302MRAICX*
Fixture
Description
12V
12V
12V
12V
12V
12V
12V
Lamps Height Lamps Height Lamps Height Lamps Height Lamps Height Lamps Height Lamps Height Lamps Height
305
Adjustable Premium 50W
Die-Cast Step Baffle MR16
See page 106
5 7/8"
50W
MR16
4 5/8" N/A
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
50W
MR16
7 3/8" 50W
MR16
9 1/4"
50W
MR16
7 5/8"
304
Adjustable
Premium Cone
See page 106
50W
MR16
5 7/8"
42W
MR16
4 5/8" N/A
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
50W
MR16
7 3/8" 50W
MR16
9 1/4"
50W
MR16
7 5/8"
304
Adjustable
Premium Cone
See page 107
50W
MR16
5 7/8"
50W
MR16
4 5/8" N/A
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
50W
MR16
7 3/8" 50W
MR16
9 1/4"
50W
MR16
7 5/8"
308
Adjustable Pinhole
50W
MR16
5 7/8"
42W
MR16
4 5/8" N/A
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
N/A
7 3/8" 50W
MR16
9 1/4"
37W
MR16
7 5/8"
50W
MR16
5 7/8"
42W
MR16
4 5/8" N/A
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
N/A
7 3/8" 50W
MR16
9 1/4"
37W
MR16
7 5/8"
50W
MR16
5 7/8"
50W
MR16
4 5/8" 37W
MR16
3 1/4"
50W
MR16
6 1/8"
50W
MR16
6 1/8"
50W
MR16
7 3/8" 50W
MR16
9 1/4"
50W
MR16
7 5/8"
50W
MR16
5 7/8"
50W
MR16
4 5/8" 37W
MR16
3 1/4"
50W
MR16
6 1/8"
50W
MR16
6 1/8"
37W
MR16
7 3/8" 37W
MR16
9 1/4"
50W
MR16
7 5/8"
315
Wall Washer / Shield 50W
MR16
See page 111
5 7/8"
50W
MR16
4 5/8" 37W
MR16
3 1/4"
50W
MR16
6 1/8"
50W
MR16
6 1/8"
N/A
7 3/8" 50W
MR16
9 1/4"
50W
MR16
7 5/8"
317
Residence Disk
50W
MR16
5 7/8"
50W
MR16
4 5/8" 37W
MR16
3 1/4"
50W
MR16
6 1/8"
50W
MR16
6 1/8"
N/A
7 3/8" 50W
MR16
9 1/4"
50W
MR16
7 5/8"
50W
MR16
5 7/8"
50W
MR16
4 5/8" N/A
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
50W
MR16
7 3/8" 50W
MR16
9 1/4"
50W
MR16
7 5/8"
50W
MR16
5 7/8"
50W
MR16
4 5/8" 37W
MR16
3 1/4"
50W
MR16
6 1/8"
50W
MR16
6 1/8"
N/A
N/A
50W
MR16
9 1/4"
50W
MR16
7 5/8"
50W
MR16
5 7/8"
50W
MR16
4 5/8" N/A
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
N/A
N/A
50W
MR16
9 1/4"
50W
MR16
7 5/8"
50W
MR16
5 7/8"
50W
MR16
4 5/8" N/A
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
N/A
N/A
50W
MR16
9 1/4"
50W
MR16
7 5/8"
50W
MR16
5 7/8"
50W
MR16
4 5/8" N/A
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
N/A
N/A
50W
MR16
9 1/4"
50W
MR16
7 5/8"
50W
MR16
5 7/8"
50W
MR16
4 5/8" N/A
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
N/A
N/A
50W
MR16
9 1/4"
50W
MR16
7 5/8"
309
4 3/ 4 "
4 3/ 4 "
12V
Description
Trim
Lamps Height Trim
Adjustable
Specular Cone
★★★
404BAX 75W
404CCDX MR16
404CLX
404GDX
5 7/8"
12V
4 3/ 4 "
Lamps Height Trim
4 3/ 4 "
12V
Lamps Height Trim
404BAX 50W
404CCDX MR16
404CLX
404GDX
4 5/8" 404BAX 75W
404CCDX MR16
404CLX
404GDX
6 1/8"
405BKX
405WHX
4 5/8" 405BKX
405WHX
6 1/8"
4 3/ 4 "
12V
Lamps Height Trim
404BAX 75W
404CCDX MR16
404CLX
404GDX
6 1/8"
405BKX
Adjustable
Premium Die- 405WHX
Cast Step Baffle
★★★
See page 118
Eyeball
★★★
75W
MR16
5 7/8"
50W
MR16
75W
MR16
405BKX
405WHX
6 1/8"
75W
MR16
Slot Aperture
See page 109
12V
313
Lamps Height
404BAX 50W
404CCDX MR16
404CLX
404GDX
9 1/4"
405BKX
405WHX
9 1/4"
50W
MR16
Gimbal
See page 109
378
Elbow
See page 111
See page 118
405
Ultra-Shallow
Electronic
303MRE
Single-Unit Plate to
be used with any of
these Frame-in Kits
Effect
63
Low-Profile
Electronic
3401MREX
See page 107
Single-Unit Plate to
be used with any of
these Frame-in Kits
Effect
6
"
3 /4
Non-IC Frame-In Kit
Low-Profile
Electronic
3401MREX
400SQWH
400SQBK
Magnetic
300MRX
300SQWH
300SQBK
See page 114
406WHX 75W
406WWX MR16
5 7/8"
406WHX 50W
406WWX MR16
4 5/8" 406WHX 75W
406WWX MR16
6 1/8"
406WHX 75W
406WWX MR16
6 1/8"
406WHX 50W
406WWX MR16
9 1/4"
372
Cross Blade
See page 108
373
See page 118
409
Slot Aperture
★★★
See page 118
413
Gimbal
★★
See page 119
478
Elbow
★★
See page 119
Glass Cylinder
See page 113
409BKX
409MTX
409SBX
409STX
409WHX
75W
MR16
413BKX
413MTX
413SBX
413STX
413WHX
75W
MR16
478BKX
478GKX
478STX
478WHX
75W
MR16
5 7/8"
5 7/8"
5 7/8"
409BKX
409MTX
409SBX
409STX
409WHX
50W
MR16
413BKX
413MTX
413SBX
413STX
413WHX
50W
MR16
478BKX
478GKX
478STX
478WHX
50W
MR16
4 5/8" 409BKX
409MTX
409SBX
409STX
409WHX
75W
MR16
4 5/8" 413BKX
413MTX
413SBX
413STX
413WHX
75W
MR16
4 5/8" 478BKX
478GKX
478STX
478WHX
75W
MR16
6 1/8"
6 1/8"
6 1/8"
409BKX
409MTX
409SBX
409STX
409WHX
75W
MR16
413BKX
413MTX
413SBX
413STX
413WHX
75W
MR16
478BKX
478GKX
478STX
478WHX
75W
MR16
6 1/8"
6 1/8"
6 1/8"
409BKX
409MTX
409SBX
409STX
409WHX
50W
MR16
413BKX
413MTX
413SBX
413STX
413WHX
50W
MR16
478BKX
478GKX
478STX
478WHX
50W
MR16
9 1/4"
374
Basic Cone
See page 112
375
9 1/4"
Basic Baffle
See page 112
376
Shower Light
See page 113
9 1/4"
377
Frosted Glass
See page 112
384
Basic Adjustable
Cone
See page 108
50W
MR16
5 7/8"
50W
MR16
4 5/8" N/A
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
N/A
N/A
50W
MR16
9 1/4"
50W
MR16
7 5/8"
385
Basic Adjustable
Baffle
See page 108
50W
MR16
5 7/8"
50W
MR16
4 5/8" N/A
N/A
50W
MR16
6 1/8"
50W
MR16
6 1/8"
N/A
N/A
50W
MR16
9 1/4"
50W
MR16
7 5/8"
Note: Line Voltage ES Versions also available.
Please consult factory.
128
* For electronic transformer, order item number 302MRAICEX
L y t e c a s t e r
129
LytePoints Accent Lighting Performance Data
LytePoints Accessories
T-Bar Ceiling Clips
1956
0° Aiming Angle
Lamps
Beam Spread
( To 50% CBCP)
CBCP
Life (Hrs.)
Rated
30° Aiming Angle
30° Aiming Angle
D
C
FC
L
W
6'
9'
12'
15'
5'
7'
9'
11'
3.5'
5.2'
6.9'
8.7'
2.9'
4.0'
5.2'
6.4'
148
66
37
24
94
48
29
19
1.0'
1.5'
2.0'
2.3'
1.5'
2.1'
2.7'
3.4'
0.8'
1.3'
1.7'
2.1'
1.3'
1.8'
2.4'
2.9'
1.5'
2.2'
2.9'
3.6'
2'
3'
4'
5'
1.2'
1.7'
2.3'
2.9'
85
38
21
14
2.0' 1.7'
3.0' 2.5'
4.1' 3.4'
5.1' 4.2'
D
FC
L
W
7'
10'
13'
16'
6'
8'
10'
12'
167
82
49
32
100
56
36
25
0.9'
1.2'
1.6'
2.0'
1.4'
1.8'
2.3'
2.7'
0.9'
1.2'
1.6'
2.0'
1.4'
1.8'
2.3'
2.7'
2'
3'
4'
5'
131
58
33
21
1.5'
2.2'
2.9'
3.6'
D
All standard frame-in kit mounting bars have
an integral T-bar tab. This accessory is to be
used with 20" mounting bars, item 1964. Set
of 4.
Mounting Bar Locking Clips
0098
To lock mounting bars in place after
installation. Carton of 12. For use with
302 Series or 402 Series frame‑in kits.
45° Aiming Angle
D
L
W
4.0' 181
6.0' 81
8.0' 45
10.0' 29
3.0 141
5.0 51
7.0' 26
9.0' 16
1.0
1.5
2.0
2.5
1.4'
2.3'
3.2'
4.2'
0.7'
1.0'
1.4'
1.7'
1.0'
1.6'
2.3'
2.9'
2'
3'
4'
5'
2.0'
3.0'
4.0'
5.0'
3.4'
5.0'
6.7'
8.4'
2.1'
3.1'
4.1'
5.1'
C
FC
L
W
2'
3'
4'
5'
2'
3'
4'
5'
3.5
5.2'
6.9'
8.7'
3.5'
5.2'
6.9'
8.7'
256
114
64
41
113
50
28
18
1.0'
1.5'
2.0'
2.5'
1.9'
2.8'
3.8'
4.7'
0.5'
0.7'
1.0'
1.2'
0.9'
1.4'
1.8'
2.3'
4'
6'
8'
10'
3'
5'
7'
9'
1'
2'
3'
4'
1.7'
3.5'
5.2'
6.9'
66
16
7
4
4.8'
9.7'
14.5'
19.3'
1.5'
2.9'
4.4'
5.8'
C
FC
ES16 Lamp
56946 120V 50W 25 degree NFL, 2000 hours
average life, same size as a 12V MR16 Lamp.
“W” shaped vibration resistant filament. Turn
and lock base allows front relamping with
certain trims. Can be dimmed with standard
incandescent dimmers. Integral cover glass for
added safety.
MR16 Low Voltage Halogen Bi-Pin Lamps
20W MR16
VNSP (EZX)
7°
8200
3000
20W MR16
NSP (ESX)
13°
3600
3000
46
21
12
7
20W MR16
FL (BAB)
40°
525
4000
35W MR16
NSP (FRB)
12°
8700
4000
7'
10'
13'
16'
178
87
51
34
1.5'
2.1'
2.7'
3.4'
1.5'
2.1'
2.7'
3.4'
6'
9'
12'
15'
3.5'
5.2'
6.9'
8.7'
157
70
39
25
1.7' 1.5'
2.5' 2.2'
3.4' 2.9'
4.2' 3.6'
2'
3'
4'
5'
3.5'
5.2'
6.9'
6.7'
272
121
68
44
1.7' 0.8'
2.6' 1.3'
3.5' 1.7'
4.3' 2.1'
4'
6'
8'
10'
4.0' 192
6.0' 85
8.0' 48
10.0' 31
1.7' 1.2'
2.6' 1.8'
3.4' 2.4'
4.3' 3.0'
6'
8'
10'
12'
108
61
39
27
2.1'
2.8'
3.5'
4.2'
2.1'
2.8'
3.5'
4.2'
5'
7'
9'
11'
2.9
4.0'
5.2'
6.4'
101
52
31
21
2.4'
3.3'
4.3'
5.2'
2.0'
2.9'
3.7'
4.5'
2'
3'
4'
5'
3.5'
5.2'
6.9'
8.7'
122
54
30
20
3.1' 1.4'
4.7' 2.1'
6.2' 2.8'
7.8' 3.5'
3'
5'
7'
9'
3.0'
5.0'
7.0'
9.0'
153
55
28
17
2.2' 1.5'
3.6' 2.5'
5.1' 3.5'
6.6' 4.5'
4' 100
6' 44
8' 25
10' 16
6' 180
12' 80
16' 45
20' 29
2.9'
4.4'
5.8'
7.3'
1.4'
2.1'
2.8'
3.5'
2.9'
4.4'
5.8'
7.3'
1.4'
2.1'
2.8'
3.5'
3'
5'
7'
9'
1.7'
2.9'
4.0'
5.2'
115
42
21
13
3.0' 2.5'
5.1' 4.2'
7.1' 5.8'
9.1' 7.6'
1'
2'
3'
4'
1.7'
3.5'
5.2'
6.9'
200 4.8' 1.5'
50 9.7' 2.9'
22 14.5' 4.4'
13 19.3' 5.8'
3'
4'
5'
6'
3.0'
4.0'
5.0'
6.0'
63
35
23
16
5.0'
6.7'
8.4'
10.1'
3.1'
4.1'
5.1'
6.2'
5.0' 163 1.8'
7.0' 83 2.5'
9.0' 50 3.2'
11.0' 34 3.9'
1.2'
1.7'
2.2'
2.7'
97
55
35
24
2.7'
3.5'
4.4'
5.3'
4' 128
6' 57
8' 32
10' 21
8' 205
12' 91
16' 51
20' 33
35W MR16
SP (FRA)
20°
3900
4000
35W MR16
FL (FMW)
40°
1600
4000
37W MR16
IR (NSP)
10°
11500
4000
37W MR16
IR (NFL)
25°
3500
4000
37W MR16
IR (FL)
40°
2050
4000
42W MR16
VNSP (EZY)
9°
13,100
3500
6'
8'
10'
12'
7'
10'
13'
16'
4.0'
5.8'
7.5'
9.2'
152
75
44
29
1.6' 1.4'
2.3' 2.0'
3.0' 2.8"
3.7' 3.2'
3'
4'
5'
6'
5.2'
6.9'
8.7'
10.4'
160
90'
58
40
2.1'
2.9'
3.6'
4.3'
1.0'
1.4'
1.7'
2.1'
5'
7'
9'
11'
2.7'
3.5'
4.4'
5.3'
5'
7'
9'
11'
2.9'
4.0'
5.2'
6.4'
91
46
28
19
3.0'
4.2'
5.4'
6.6'
2.6'
3.6'
4.6'
5.6'
2'
3'
4'
5'
3.5'
5.2'
6.9'
8.7'
109 4.2'
49 6.2'
27 8.3'
18' 10.4'
1.8'
2.7'
3.5'
4.4'
3' 3.0'
5' 5.0'
7' 7.0'
9' 9.0'
2.9'
4.4'
5.8'
7.3'
1.3'
1.9'
2.5'
3.1'
2.9'
4.4'
5.8'
7.3'
1.3'
1.9'
2.5'
3.1'
3'
5'
7'
9'
7'
10'
13'
16'
1.7'
2.9'
4.0'
5.2'
4.0
5.8'
7.5'
9.2'
148
53
27
16
174
85
50
33
3.0'
5.1'
7.1'
9.1'
1.5'
2.1'
2.7'
3.4'
2.5'
4.2'
5.9'
7.6'
1.3'
1.8'
2.4'
2.9'
1'
2'
3'
4'
3'
4'
5'
6'
1.7'
3.5'
5.2'
6.9'
5.2'
6.9'
8.7'
10.4
258
64
28
16
182
102
66
45
4.8'
9.7'
14.5'
19.3'
1.9'
2.6'
3.2'
3.8'
1.5'
2.9'
4.4'
5.8'
0.9'
1.3'
1.6'
1.9'
3'
4'
5'
6'
5'
7'
9'
11'
150
67
38
24
1.9'
2.9'
3.8'
4.8'
1.9'
2.9'
3.8'
4.8'
3'
5'
7'
9'
1.7'
2.9'
4.0'
5.2'
173
62
32
19
2.0' 1.7'
3.3' 2.8'
4.6' 3.9'
5.9' 5.0'
1'
2'
3'
4'
1.7'
3.5'
5.2'
6.9'
300
75
33
19
2.3' 1.0'
4.6' 1.9'
7.0' 2.9'
9.3' 3.6'
3' 3.0
4' 4.0'
5' 5.0'
6' 6.0'
3'
4'
5'
6'
2'
3'
4'
5'
5.2' 142 3.1'
6.9' 80 4.1'
8.7' 51 5.1'
10.4' 35 6.2'
3.5' 106 4.6'
5.2' 47 7.0'
6.9' 27 9.3'
8.7' 17 11.6'
1.5'
2.0'
2.5'
2.9'
1.9'
2.9'
3.6'
4.8'
137
49
25
15
2.8'
4.7'
6.5'
8.4'
3.0' 61 5.0' 3.1'
4.0' 45 6.7' 4.1'
5.0' 29 8.4' 5.1'
6.0' 20 10.1' 6.2'
5.0' 185 1.6' 1.1'
7.0 95 2.2' 1.6'
9.0' 57 2.8' 2.0'
11.0' 38 3.5' 2.4'
94
53
34
24
3.1'
4.1'
5.1'
6.1'
2.0'
2.7'
3.4'
4.1'
5'
7'
9'
11'
3'
5'
7'
9'
5.0' 144
7.0' 74
9.0' 45
11.0' 30
3.0' 134
5.0' 48
7.0' 25
9.0' 15
2.5'
3.5'
4.5'
5.5'
3.1'
5.1'
7.1'
9.2'
1.7'
2.4'
3.1'
3.8'
2.0'
3.4'
4.8'
6.1'
5.0'
6.7'
8.4'
10.1'
3.1'
4.1'
5.1'
6.2'
42W MR16
NFL (EYS)
27°
2400
4000
50W MR16
NSP (Ext)
14°
10,200
4000
8' 159
12' 71
16' 40
20' 26
2.0'
2.9'
3.8'
4.9'
2.0'
2.9'
3.9'
4.9'
7'
10'
13'
15'
4.0'
5.8'
7.5'
9.2'
135
66
39
28
2.3'
3.3'
4.3'
5.3'
50W MR16
NFL (EXZ) 27°
3400
4000
6'
8'
10'
12'
94
53
34
24
2.9'
3.8'
4.8'
5.8'
2.9'
3.8'
4.8'
5.8'
5'
7'
9'
11'
2.9'
4.0'
5.2'
6.4'
88
45
27
18
3.3' 2.8'
4.6' 3.9'
5.9' 5.0'
7.2' 6.1'
50W MR16
FL (EXN)
40°
1850
4000
4'
6'
8'
10'
116
51
29
19
2.9'
4.4'
5.8'
7.3'
2.9'
4.4'
5.8'
7.3'
3' 1.7'
5' 2.9
7' 4.0'
9' 5.2'
134
48
25
15
3.0' 2.5'
5.1' 4.2'
7.1' 5.9'
9.1' 7.6'
1'
2'
3'
4'
1.7'
3.5'
5.2'
6.9'
231 4.8' 1.5'
58 9.7' 2.9'
26 14.5' 4.4'
14 19.3' 5.8'
3'
4'
5'
6'
3.0'
4.0'
5.0'
6.0'
73
41
26
18
50W MR16
WFL (FNV)
55°
1150
4000
128
46
23
14
3.1'
5.2'
7.3'
9.4'
3.1'
5.2'
7.3'
9.4'
3'
5'
7'
9'
83
30
15
9
4.6'
7.6'
10.7'
13.7'
3.6'
6.0'
8.4'
10.8'
1'
2'
3'
4'
1.7'
3.5'
5.2'
6.9'
144
36
16
9
22.3'
44.5'
66.8'
89.1'
2.1'
4.2'
6.2'
8.3'
2'
3'
4'
5'
2.0'
3.0'
4.0'
5.0'
102 5.7' 2.9'
45 8.6' 4.4'
25 11.4' 5.9'
16 14.3' 7.4'
73W MR16
SP
10°
14000
4000
8' 219
12' 97
16' 55
20' 35
1.4'
2.1'
2.8'
3.5'
1.4'
2,1'
2.9'
3.5'
7'
10'
13'
16'
4.0'
5.8'
7.5'
8.2'
186
91
54
36
1.6'
2.3'
3.0'
3.7'
1.4'
2.0'
2.6'
3.2'
3'
4'
5'
6'
5.2'
8.9'
8.7'
10.4'
194
109
70
49
2.1'
2.9'
3.6'
43'
1.0'
1.4'
1.7'
2.1'
5'
7'
9'
11'
5.0' 198 1.8'
7.0' 101 2.5'
9.0' 61 3.2"
11.0' 41 3.8'
1.2'
1.7'
2.5'
2.7'
73W MR16
FL
36°
2500
4000
75W MR16
NSP (EYF)
14°
12,000
4000
75W MR16
NFL (EYJ)
25°
4900
4000
75W MR16
FL (EYC)
42°
2100
2.5'
3.8'
5.2'
6.5'
2.0'
2.9'
3.9'
4.9'
2.7'
3.5'
4.4'
5.3'
3.1'
4.6'
6.1'
7.7'
2.6'
3.8'
5.2'
6.5'
2.0'
2.9'
3.9'
4.9'
2.7'
3.5'
4.4'
5.3'
3.1'
4.6'
6.1'
7.7'
3'
5'
7'
9'
7'
10'
13'
16'
5'
7'
9'
11'
3'
5'
7'
9'
1.7'
2.9'
4.0'
5.2'
4.0'
5.8'
7.5'
9.2'
2.9'
4.0'
5.2'
6.4'
1.7'
2.9'
4.0'
5.2'
180 2.7' 2.3'
65 4.5' 3.8'
33 6.3' 5.3'
20 6.1' 6.6'
159 2.3' 2.0'
78 3.3' 2.8'
40 4.3' 3.7'
30 5.3' 4.5'
127 3.0' 2.6'
65 4.2' 3.6'
39 5.4' 4.6'
26 6.6' 5.6'
152 3.2' 2.7'
55 5.4' 4.4'
28 7.5' 6.2'
17 9.7' 6.0
1'
2'
3'
4'
3'
4'
5'
6'
2'
3'
4'
5'
1'
2'
3'
4'
1.7'
3.5'
5.2'
6.9'
5.2'
6.9'
8.7'
10.4'
3.5'
5.2'
6.9'
8.7
1.7'
3.5'
5.2'
6.9'
313
78
35
20
167
94
60
42
153
68
38
25
263
66
29
16
3.8'
7.5'
11.4'
15.2'
3.1'
4.1'
5.1'
6.2'
4.2'
6.2'
8.3'
10.4'
5.5'
11.0'
16.5'
22.0'
1.3'
2.6'
3.9'
5.2'
1.5'
2.0'
2.5'
2.9'
1.8'
2.7'
3.5'
4.4'
1.5'
3.1'
4.6'
6.1'
3'
4'
5'
6'
5'
7'
9'
11'
3'
5'
7'
9'
3'
4'
5'
6'
3.0' 98 4.4'
4.0' 55 5.8'
5.0' 35 7.3'
6.0' 25 6.7'
5.0' 170 2.5'
7.0' 87 3.5'
9.0' 52 4.5'
11.0' 35 5.5'
3.0' 192 2.8'
5.0' 69 4.7'
7.0' 35 6.5'
9.0' 21 8.4'
3.0' 62 5.4'
4.0' 46 7.2'
5.0' 30 9.0'
6.0' 21 10.8'
2.8'
3.7'
4.6'
5.5'
1.7'
2.4'
3.1'
3.8'
1.9'
3.1'
4.4'
5.6'
3.3'
4.3'
5.4'
6.5'
130
4000
3'
5'
7'
9'
4'
6'
8'
10'
8'
12'
16'
20'
6'
8'
10'
12'
4'
6'
8'
10'
156
59
39
25
188
83
47
30
136
77
49
34
131
58
33
21
1.7'
2.9'
4.0'
5.2'
1964
20" mounting bar extenders. Set of 2.
Compatible with 302 Series and 402 Series
frame-in kits.
Excludes: 302ESAICX
302MRAICX
Vapor Barrier Extender
VBE300 For airtight applications using non-AirSeal®
IC frame-in kits only. For 24" center-to-center
joists.
Spread Lens
0088SYSymmetric Prismatic Spread Lens. Compatible
with 378X and 478X Elbow Series.
1.9'
3.1'
4.4'
5.6'
4'
6'
8'
10'
2.0'
2.8'
3.7'
4.5'
Mounting Bars
(FC) is initial footcandles at center of beam. Beam length (L) and beam width (W) are to where the candlepower is reduced to 50% of center beam candlepower. CBCP is center beam candlepower. (C) is distance to the center of the beam. Lamp data shown is typical and is based on bare lamp photometrics.
Contact lamp manufacturers for availability and performance.
Remodel Mounting Plates
0093
0094
For all 3 3/4" small aperture recessed
luminaires. Carton of 12.
For all 4 3/4" small aperture recessed
luminaires. Carton of 12.
Thick Ceiling Adapter
300XTC Allows installation of LytePoints 300 Series
trims in ceilings up to 2 3/4" thick.
Beam Elongator
0088ASSymmetric Beam Elongator. Compatible with
378X and 478X Elbow Series.
MR16 Specialty Filters
Description
Catalog Number
2"
Diffusion:
Symmetric 55 degree
Asymmetric 5 x 55 degree Light Frost
Perimeter Frost
Soft Focus
AF2SY
AF2AS
AF2LF
AF2PF
AF2SF
Specialty:
Ultraviolet Reduction
Infrared Reduction
AF2UV
AF2IR
L y t e c a s t e r
131
Index
Item
0093
0094
0098
1005
1008
1010
1011
1012
1013
1021
1022
1024
1027
1029
1035
1038
1045
1046
1048
1071
1076
1078
1082
1085
1088
1090
1095
1096
1105
1108
1110
1112
1113
1121
1122
1124
1126
1127
1128
1129
1131
1132
1133
1134
1135
1138
1143
1144
1145
1146
1148
1149
1150
1151
1152
1154
1155
1161
1163
1164
1171
1176
1182
1185
1190
1195
1196
1302
1304
1305
1350
1402
1404
1405
1450
1502
1550
1552
1954
1955
1956
1957
1959
132
Index
Page
131
131
131
32, 34, 36, 40, 44
32, 34, 36, 40, 44
32, 34, 36, 40, 44
32, 36
32, 34, 36, 40, 44
32, 34, 36, 40, 44
33, 35, 37, 41, 45
38, 42, 45
33, 35, 37, 41, 45
38, 42
37, 41
33, 35, 37, 41
38, 42
32, 34, 36, 40, 44
32, 34, 36, 40, 44
38, 42
32, 34, 36, 40, 44
32, 34, 40, 44
33, 35, 37, 41
38, 42, 45
33, 35, 37, 41, 45
45
33, 37, 41, , 45
33, 35, 37, 41
33, 35, 37, 41
54, 58, 60, 62, 68, 74, 78
54, 58, 60, 62, 68, 74, 78
54, 58, 60, 62, 68, 74, 78
54, 58, 60, 62, 68, 74, 78
54, 58, 60, 62, 68, 74
56, 59, 61, 63, 69, 75, 79
71, 76
56, 59, 61, 63, 69, 75, 79
56, 59, 61, 63, 69, 75, 79
71, 77
56, 59, 61, 63, 69, 75, 79
71, 77
77
55, 60, 62, 68, 74, 78
77
56, 59, 61, 63, 69, 75, 79
61, 63, 70, 76
71, 77
54, 58, 60, 62, 68, 74, 78
54, 58, 60, 62, 68, 74, 78
54, 58, 68, 74
54, 58, 68, 74
71, 77
68
68
68
82, 83
77
82, 83
82, 83
82, 83
82, 83
55, 58, 60, 62, 69, 75, 78
55, 58, 60, 62, 69, 74, 78
71, 76, 80
55, 59, 61, 63, 70, 76, 80
56, 61, 63, 70, 75, 79
55, 70, 76
55, 70, 76
88
88
88
93
88
88
88
93
88
93
92
93
92
92, 131
93
93
Item
1960
1961
1964
1966
1968
1976
1977
2005
2006
2008
2010
2011
2012
2013
2022
2027
2045
2046
2090
2095
2096
6497
8608
8608
8609
8609
56946
0088AS
0088SY
0088UV
1000AICM
1000IC
1000ICV
1000LV
1000LVNT
1000LVR
1000P1
1001CD
1001CDDW
1001CDSW
1001CL
1001CLDW
1001CLSW
1001F13U
1001F18U
1001F18UEM
1001F26U
1001F26UEM
1001FD26L1
1001FD26L2
1001FD26M7U
1001FD26MX1
1001FD26MX2
1001FR18U
1001FR26U
1001HACB
1001HCD
1001HCDC
1001HCDF
1001HCDO
1001HCDSW
1001HCL
1001HCLC
1001HCLF
1001HCLO
1001HCLSW
1001HWH
1001HWHC
1001HWHCB
1001HWHF
1001HWHO
1001HWHSW
1001WH
1001WHDW
1001WHSW
1002P1
1003R
1004F13ES
1004F13ESN
1004F13ESR
1004F13RES
1004F13RESN
1004F13RESR
Page
93
93
92, 131
92
93
92
92
22, 23, 24, 25, 26
25, 26
22, 23, 24, 25, 26
22, 23, 24, 25, 26
22, 25, 26
22, 23, 24, 25, 26
22, 23, 24, 25, 26
23, 24
23, 24
22
22
22, 24
22
22
27
25
47
25
47
131
131
131
131
40
40
47
46
46
46
36
29
29
29
29
29
29
28
28
28
28
28
28
28
28
28
28
28
28
30
30
31
31
31
30
30
31
31
31
30
30
31
30
31
31
30
29
29
29
36
36
34
34
34
32
32
32
Item
1004F18ES
1004F18ESN
1004F18ESR
1004F18RES
1004F18RESN
1004F18RESR
1004F26ES
1004F26ESN
1004F26ESR
1004F26RES
1004F26RESN
1004F26RESR
1004IC
1004ICN
1004ICNQ
1004ICQ
1004ICR
1004ICV
1004ICX
1004ICX
1004SIC
1004SICN
1004SICR
1005BNM
1005NM
1005WH
1008NM
1010NM
1012NM
1013BK
1013BKNM
1013CD
1013CDNM
1013NM
1013WH
1022WH
1027BK
1027BKNM
1027BNM
1027CD
1027CDNM
1027NM
1027WH
1029BK
1029BKNM
1029BNM
1029CD
1029CDNM
1029CL
1029CLNM
1029GD
1029GDNM
1029NM
1029WH
1035WH
1038NM
1046CD
1048NM
1052LV
1055LV
1055WHLV
1056LV
1062LV
1063LV
1064CDLV
1064LV
1076WH
1081CD
1081WH
1084CD
1084WH
1088GW
1088WH
1096CD
1100AICM
1100AICMFT
1100DAICM
1100DICM
1100FTUES
1100FTUESEM
1100IC
1101CD
1101CDDW
Page
34
34
34
32
32
32
34
34
34
32
32
32
44
44
44
44
44
47
40
44
44
44
44
32, 34, 36, 40, 44
32, 34, 36, 40, 44
32, 34, 36, 40, 44
32, 34, 36, 40, 44
32, 34, 36, 40, 44
32, 34, 36, 40, 44
32, 34, 36, 40, 44
32, 34, 36, 40, 44
32, 34, 36, 40, 44
32, 34, 36, 40, 44
32, 34, 36, 40, 44
32, 34, 36, 40, 44
38, 42, 45
38, 42
38, 42
38, 42
38, 42
38, 42
38, 42
38, 42
37, 41
37, 41
37, 41
37, 41
37, 41
37, 41
37, 41
37, 41
37, 41
37, 41
37, 41
33, 35, 37, 41
38, 42
32, 34, 36, 40, 44
38, 42
46, 47
46, 47
46, 47
46, 47
46, 47
46, 47
46, 47
46, 47
32, 34, 40, 44
45
45
33, 37, 41
33, 37, 41
45
45
33, 35, 37, 41
74, 83
58
74, 83
74, 83
54
54
74, 83
51
51
Item
1101CDSW
1101CL
1101CLDW
1101CLSW
1101F18U
1101F2642U
1101F2642UEM
1101F2642US
1101FD2642M7U
1101FD2642MX1
1101FD2642MX2
1101FD26L1
1101FD26L2
1101FD32L1
1101FD32L2
1101FR18U
1101FR2642U
1101HACB
1101HCD
1101HCDC
1101HCDF
1101HCDO
1101HCDSW
1101HCL
1101HCLC
1101HCLF
1101HCLO
1101HCLSW
1101HWH
1101HWHC
1101HWHCB
1101HWHF
1101HWHO
1101HWHSW
1101WH
1101WHDW
1101WHSW
1102HF
1102P1
1102T1
1102T13U
1102T13UEM
1102T18U
1102T18UEM
1102T26U
1102T26UEM
1102TH1
1102TH1R
1102TH2
1102TM1
1102TM2
1103R
1104F13ES
1104F13ESN
1104F13ESR
1104F13RES
1104F13RESN
1104F13RESR
1104F18ES
1104F18ESN
1104F18ESR
1104F18RES
1104F18RESN
1104F18RESR
1104F2632ES
1104F2632ESN
1104F2632ESR
1104F26RES
1104F26RESN
1104F26RESR
1104IC
1104ICN
1104ICNQ
1104ICR
1104ICX
1104ICXN
1104ICXNQ
1104SIC
1104SICN
1104SICR
1105BNM
1105HR
1105NM
Page
51
51
51
51
50
50
50
50
50
50
50
50
50
50
50
50
50
52
52
53
53
53
52
52
53
53
53
52
52
53
52
53
53
52
51
51
51
84
68, 82
64
64
66
64
66
64
66
64
64
64
64
64
68, 82
62
62
62
60
60
60
62
62
62
60
60
60
62
62
62
60
60
60
78
78
78
78
74, 83
74, 83
74, 83
81
81
81
54, 58, 60, 62, 68, 74, 78
85
54, 58, 60, 62, 68, 74, 78
Item
1105T
1105TWH
1105WH
1108NM
1110NM
1112NM
1113BK
1113BKNM
1113CD
1113CDNM
1113HR
1113NM
1113TCL
1113TGD
1113WH
1122WH
1126HR
1126T
1127BK
1127BKNM
1127BNM
1127CD
1127CDNM
1127NM
1127WH
1128T
1129BK
1129BKNM
1129BNM
1129CD
1129CDNM
1129CL
1129CLNM
1129GD
1129GDNM
1129NM
1129WH
1131BK
1131CL
1131GD
1131WH
1132T
1133BK
1133CL
1133GD
1133WH
1135T
1135TWH
1135WH
1138NM
1144CD
1146CD
1146HR
1148NM
1149HR
1151CD
1151HR
1154BK
1154BKNM
1154CD
1154CDNM
1154CL
1154CLNM
1154GD
1154GDNM
1154GWB
1154GWC
1154MW
1154NM
1154WH
1155WH
1161WH
1170M1
1176WH
1177LX
1177SH
1178LX
1178SH
1178T
1179M1
1179WH
1181CD
1181WH
Page
64, 66
64, 66
54, 58, 60, 62, 68, 74, 78
54, 58, 60, 62, 68, 74, 78
54, 58, 60, 62, 68, 74, 78
54, 58, 60, 62, 68, 74, 78
54, 58, 60, 62, 68, 74, 78
54, 58, 60, 62, 68, 74, 78
54, 58, 60, 62, 68, 74, 78
54, 58, 60, 62, 68, 74, 78
85
54, 58, 60, 62, 68, 74
64, 66
64, 66
54, 58, 60, 62, 68, 74, 78
71, 76
85
64, 66
71, 77
71, 77
71, 77
71, 77
71, 77
71, 77
71, 77
64, 66
71, 77
71, 77
71, 77
71, 77
71, 77
71, 77
71, 77
71, 77
71, 77
71, 77
71, 77
77
77
77
77
64, 66
77
77
77
77
64, 66
64, 66
61, 63, 70, 76
71, 77
54, 58, 60, 62, 68, 74, 78
54, 58, 68, 74
85
71, 77
85
68
85
77
77
77
77
77
77
77
77
77
77
77
77
77
82, 83
82, 83
55, 58, 69, 75, 79
55, 58, 60, 62, 69, 74, 78
35, 45, 61, 63, 79, 81
56, 59, 61, 63, 70, 75, 79
35, 45, 61, 63, 79, 81
56, 59, 61, 63, 70, 75, 79
65, 67
55, 60, 62, 69, 75, 78
55, 60, 62, 69, 75, 78
79
79
Item
1184CD
1184WH
1196CD
12FR2X10
1350BA
1350BG
1350BK
1350CD
1350CL
1350GD
1350WH
1350WHB
1450BA
1450BG
1450BK
1450CD
1450CL
1450GD
1450WH
1450WHB
1550BA
1550BG
1550BK
1550CD
1550CL
1550GD
1550WH
1550WHB
16FR2X10
16FR2X6
1700P1
1738CL
1738GD
1920LV
1967A
1967B
1967C
1975A
1975A
1975B
1975B
1975C
1985N
1985S
2000AIC
2000AICV
2000IC
2000LV
2000LVNT
2000LVR
2000P1
2001CD
2001CDC
2001CDF
2001CDO
2001CDSW
2001CL
2001CLC
2001CLF
2001CLO
2001CLSW
2001F13U
2001F18U
2001WH
2001WHC
2001WHF
2001WHO
2001WHSW
2002P1
2003R
2004ICV
2005BNM
2005NM
2005WH
2008NM
2010NM
2012NM
2013BK
2013BKNM
2013CD
2013CDNM
2013NM
2013WH
Page
70, 75
70, 75
55, 70, 76
87
93
93
93
93
93
93
93
93
93
93
93
93
93
93
93
93
93
93
93
93
93
93
93
93
87
87
72
72
72
48
93
93
93
92
27
92
27
92
92
92
24
26
24
25
25
25
23
21
21
21
21
21
21
21
21
21
21
20
20
21
21
21
21
21
22
22
26
22, 23, 24, 25, 26
22, 23, 24, 25, 26
22, 23, 24, 25, 26
22, 23, 24, 25, 26
22, 23, 24, 25, 26
22, 23, 24, 25, 26
22, 23, 24, 25, 26
22, 23, 24, 25, 26
22, 23, 24, 25, 26
22, 23, 24, 25, 26
22, 23, 24, 25, 26
22, 23, 24, 25, 26
Item
2022LV
2022WH
2025WH
2026WH
2027BNM
2027NM
2027WH
2029BK
2029BKNM
2029CD
2029CDNM
2029CL
2029CLNM
2029GD
2029GDNM
2029WH
2046CD
2084CD
2084WH
2090LV
2096CD
300ESX
300MRX
300SQBK
300SQWH
300XTC
302ESAICX
302ESICX
302ESX
302MRAICEX
302MRAICX
302MREX
302MRIC7X
302MRIC9X
302MRX
303MRE
304BAX
304CCDX
304CLX
304GDX
304GRPX
304RWPX
304SLPX
305ALPX
305BKX
305WHWX
308ALX
308BKX
308WWX
309ABX
309BKX
309CMX
309GKX
309SBX
309STX
309WHX
313ABX
313ALX
313BKX
313CMX
313GKX
313SBX
313STX
313WHX
315STX
315WHX
316ALX
316CMX
316GKX
316WHX
317FGALX
322AMX
322CBX
322FGX
325BKX
325WHWX
330ABX
330ALX
330BKX
330CMX
330GKX
330SBX
330STX
Page
25, 26
23, 24
25, 26
25, 26
23, 24
23, 24
23, 24
23, 24
23, 24
23, 24
23, 24
23, 24
23, 24
23, 24
23, 24
23, 24
22
22, 24
22, 24
25, 26
22
103
103
129
129
131
104
104
105
104
104
105
105
104
105
103
106
106
106
106
107
107
107
106
106
106
107
107
107
109
109
109
109
109
109
109
109
109
109
109
109
109
109
109
111
111
111
111
111
111
114
114
114
114
110
110
110
110
110
110
110
110
110
Item
330WHX
3401MREX
372CHX
372WHX
373CBCMX
373CBWHX
373FGCMX
373FGWHX
374BSX
374CHX
375BKX
375WHX
376WHX
377CHX
377WHX
378BKX
378GKX
378STX
378WHX
384BSX
384CHX
385BKX
385WHX
400MRX
400SQBK
400SQWH
402MREX
402MRIC9X
402MRX
404BAX
404CCDX
404CLX
404GDX
405BKX
405WHX
406WHX
406WWX
409BKX
409MTX
409SBX
409STX
409WHX
413BKX
413MTX
413SBX
413STX
413WHX
450GYX
450WHX
451GYX
451WHX
452GYX
452WHX
478BKX
478GKX
478STX
478WHX
602MR120
602MR277
602WH
603MR120
603MR277
603WH
604MR120
604MR277
604SQMR120
604SQMR277
604SQWH
604WH
B16
B17
B17WH
HC356
LAS56
LAS56R
MHM100
MHM75
MPM100
MPM70
VBE300
Page
110
103, 117
108
108
113
113
113
113
112
112
112
112
113
112
112
111
111
111
111
108
108
108
108
117
128
128
117
117
117
118
118
118
118
118
118
118
118
119
119
119
119
119
119
119
119
119
119
120
120
120
120
120
120
119
119
119
119
127
127
127
127
127
127
127
127
127
127
127
127
81
81
81
93
92
92
84
84
84
84
131
L y t e c a s t e r
133