J6.1.11
MR16 MULTI-SPOTS®
PRODUCT SPECIFICATIONS
Lamp One, two or three 50W MR16 lamps max.
Socket Ceramic bi-pin with integral aluminum heat shield.
Aiming 45˚ vertical aiming capability and 360˚ horizontal
rotation • Each lampholder is individually aimable.
Trim Finish All Black with White Flange (BL) or all White with
Black Lamp Cartridge and White Flange (WH).
Transformer 120VAC input voltage standard • 277VAC input
voltage optional • 12V 50VA (1-lamp unit) • 12V 100VA
(2-lamp units) or 12V 150VA (3-lamp units) thermally protected
magnetic transformer • Access cover enables simple transformer
servicing from either above or below ceiling.
Labels UL/C-UL listed for through-branch wiring, damp locations,
and IP • Product thermally protected against improper use of
lamps or insulation • I.B.E.W. Union made • CSA certified.
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Product specifications subject to change without notice.
Multi-Lamp Recessed Adjustables,
50W MR16
MS161, MS162, MS163
Type Cat. No.
_____________________________________
_____________________________________
Project:_________________________________________
Notes: _________________________________________
INSTALLATION
Mounting Bracket Mounting brackets have 2.5” vertical
adjustment and accept proprietary Tru-Lock bar hangers, 1 1/2”
C-channel and flat linear bars (ordered as accessories) or 1/2”
EMT, 3/4” and 1 1/2” C-channel (by others) • One-piece TruLock bar hangers have integral T-bar locking screws and alignment
notches for locating and locking fixture in the center or 1/4 tile
increments.
Housing 22 gauge die-formed galvanized steel, vented
• Electrical connections can be made from below the ceiling in
an internal wireway or from above the ceiling through a wireway
access cover • Wireway access cover has (2) 1/2” knockouts
with pry-out slot for conduit attachment • 1/2” knockouts with pryout slots are located on each end of fixture for conduit attachment or continuous row, end-to-end fixture installation.
Trim Attaches to housing using torsion springs • Lamp cartridge
attaches to lamp housing with 3 permanently attached spring clips
for easy front re-lamping.
Accessories Accessory lenses or color filters may be installed
in place of clear lens supplied.
DIMENSIONS
6 3/4"
9 5/8"
8 1/2"
Ceiling
Cutout
9 1/2"
8 5/8"
Ceiling Cutout
23 5/8"
14 5/8"
8 1/2"
Ceiling
Cutout
8 1/2"
Ceiling
Cutout
22 5/8"
Ceiling Cutout
13 5/8"
Ceiling Cutout
DRYWALL CEILING
CUTOUT: 13 5/8” X 8 1/2”
DRYWALL CEILING
CUTOUT: 22 5/8” X 8 1/2”
ORDERING INFORMATION
Example: MS161-BL-F
MS161
1-Lamp unit
Finish
-
12V, 50W MR16
120V Input
MS162
2-Lamp unit
MS163
3-Lamp unit
† Consult Factory for Availability
1/10
Example: HB-TL
Wattage/Lamp
Rough-In
Options
Accessories
WH White
BLBlack
277 277 Volt
F
Fuse and Fuse Holder
†CP Chicago Plenum
HB-TL
HB-28
HB-52
LB-27
Two
Two
Two
Two
25”
28”
52”
27”
Tru-Lock Bar Hangers, Pair
C-channel Bar Hangers, Pair
C-channel Bar Hangers, Pair
linear Bar Hangers, Pair
T551
T553
T555
T5501
T5503
T5504
T5505
T5506
Med. Pink Color Filter
Med. Blue Color Filter
Med. Amber Color Filter
Red Dichroic Lens
Med. Green Dichroic Lens
Med. Blue Dichroic Lens
Yellow Dichroic Lens
Magenta Dichroic Lens
T5511
T5516
T5518
T557
T559
T5520
T5521
T5522
T5559BL
Blue Green Dichroic Lens
Daylight Blue Correction Lens
Cosmetic Peach Correction Lens
Prismatic Lens
Linear Spread Lens
Diffuse Spread Lens
Uniformity Lens
UV Filter Lens
Hexcell Louver
1300 South Wolf Road • Des Plaines, Illinois 60018
PHONE 800-367-5866 • FAX 888-708-6578
www.junolightinggroup.com
J6.1.11
MR16 MULTI-SPOTS®
Multi-Lamp Recessed Adjustables,
50W MR16
FOR HORIZONTAL AIMING ANGLES
MH
MS161, MS162, MS163
W
Aim Point
A
0ϒ
Aim Point
L
L
Aiming Angle (A = 0ϒ)
W
Aiming Angle (A = 30ϒ)
FOR VERTICAL AIMING ANGLES
FOR HORIZONTAL AIMING ANGLES
D
X
MH
W
Aim Point
A
0ϒ
Aim Point
L
L
Aiming Angle (A = 0ϒ)
A
0ϒ
W
Aim Point
L
W
Aiming Angle (A = 30ϒ)
FOR VERTICAL AIMING ANGLES
D
CBCP • Centerbeam candlepower
FC • Footcandles at beam center (aim point)
Horizontal Aiming Angles
Vertical Aiming Angles
X
A
0ϒ
Aim Point
L
W
Lamp
0°
30°
30°
45°
Beam Beam Rated
Type Spread° LifeCBCPMHFC LWFC LW
D
FC X LWFC X LW
Q35W MR16 SP
5000 3900 4244 1.4 1.4158 1.9 1.6
20°
6108 2.1 2.1 70 2.8 2.4
8612.82.8403.83.3
10393.53.5254.74.1
12274.24.2185.74.9
2
1223.53.11.43452.01.51.0
3545.24.72.11533.02.21.5
4316.96.22.8 864.02.92.0
5208.77.83.5 555.03.62.5
614
10.49.34.2 386.04.43.0
FL
50001000 4632.92.9414.13.4
40°
6284.44.4186.15.0
8165.85.8108.16.7
10 10 7.3 7.3 610.2 8.4
127
8.7
8.75
12.2
10.1
2313.59.62.9 882.03.42.1
3145.2
14.54.4 393.05.03.1
4 86.9
19.35.8 224.06.74.1
5 58.7
24.17.3 145.08.45.1
6 310.4 **8.7 106.010.16.2
15°
Q50W MR16 NSP
6000 9000 4638 1.0 1.0414 1.3 1.1
6283 1.5 1.5184 2.0 1.7
8159 2.0 2.0104 2.6 2.3
10102 2.5 2.5 66 3.3 2.8
12712.92.9463.93.4
2
3193.52.11.09022.01.00.7
3
1425.23.11.54013.01.51.0
4806.94.12.02254.02.01.4
5518.75.12.51445.02.51.7
635
10.46.22.91006.03.02.1
NFL
6000 3200 4213 1.9 1.9138 2.6 2.2
25°
6942.92.9613.93.3
8533.83.8355.24.4
10344.84.8226.55.5
12245.85.8157.86.7
2
1063.54.61.93012.02.01.4
3475.27.02.91343.03.12.0
4276.99.33.8 754.04.12.7
5178.7
11.64.8 485.05.13.4
612
10.4
13.95.8 336.06.14.1
FL
6000 1700 4116 2.9 2.9 75 4.1 3.4
40°
6514.44.4336.15.0
8295.85.8198.16.7
10197.37.312
10.28.4
12 13 8.7 8.7 812.210.1
2583.59.62.91642.03.42.1
3265.2
14.54.4 733.05.03.1
4146.9
19.35.8 414.06.74.1
5 98.7
24.17.3 265.08.45.1
6 610.4 **8.7 186.010.16.2
The beam spread in degrees and the beam “L” and “W” in the following tables are computed
at 50% of centerbeam candlepower and represent areas of “effective illumination.”
**Due to steep aiming angle, length of beam extends beyond 25’.
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (800) 367-5866 • Fax (888) 708-6578
Visit us at www.junolightinggroup.com
Printed in U.S.A. ©2016 Acuity Brands Lighting, Inc.