DESCRIPTION
Eon 303-A1 is a compact, low profile, dimmable, ground mounted LED
luminaire. It provides 360° rotation and 180° vertical aiming. Eon mounts
directly to a supplied, ingrade junction box and comes standard with a
universal input LED driver (120 - 277V, 50/60 Hz). Dimming is achieved
with a standard ELV, reverse phase dimming driver or an optional 0 - 10V
dimming driver. Eon fixtures may be used indoors or outdoors and carry
an IP66 rating.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
A ... Material
Head and backplate are precisionmachined from corrosion-resistant
6061-T6 aluminum, C360 brass, C932
bronze, C110 copper or 303/304 stainless steel.
B ... Finish
Fixtures constructed from aluminum
are double protected by a RoHS compliant chemical film undercoating and
polyester powdercoat paint finish,
surpassing the rigorous demands of
the outdoor environment. A variety
of standard colors are available. Aluminum fixtures can also be brushed
and clear coat painted.
Brass, Bronze, Copper or Stainless
Steel
Fixtures constructed from brass,
bronze, copper or stainless steel are
left unpainted to reveal the natural
beauty of the material. Brass, bronze
and copper will patina over time.
D ... Lens
Diffused, tempered glass lens, factory
sealed with high temperature adhesive to prevent water intrusion and
breakage due to thermal shock.
E ... Mounting
Eon 303 - A1 mounts directly to a supplied, ingrade junction box.
H ... LED
LEDs are included and available in
three color temperatures (2700K,
3000K & 4000K) and a variety of
optics. Both color temperature and
distribution must be specified when
ordering - see reverse side for details
and catalog logic.
I ... Labels & Approvals
UL and cUL listed, standard wet label.
IP66 rated.
F ... Hardware
Stainless steel hardware is standard
to provide maximum corrosionresistance.
J ... Warranty
G ... Electrical
Eon 303 - A1 comes standard with a
universal input LED driver (120-277,
50/60Hz). The standard driver is ELV
reverse phase dimmable. An optional
0 - 10V dimming driver is also available.
Lumiere warrants it’s fixtures against
defects in materials & workmanship
for five (5) years. Auxiliary equipment
such as transformers, ballasts and LED
drivers carry the original manufacturer’s warranty.
303-A1
C ... Gasket
The backplate is sealed with a silicone
gasket to prevent water intrusion into
the jbox.
8.8 W LED
LED
ACCENT/FLOOD
4.75”
121mm
0.85”
21mm
90º
90º
3.25”
83mm
6.00”
152mm
12.00”
305mm
18.00”
457mm
Specification and Dimensions subject to change without notice.
www.cooperlighting.com
Consult your representative for additional options and finishes.
This datasheet has been downloaded from http://www.digchip.com at this page
IP66
LED INFORMATION
LED
T2, 2700K
T2, 3000K
T2, 4000K
T4, 2700K
T4, 3000K
T4, 4000K
T5X, 2700K
T5X, 3000K
T5X, 4000K
Watts
8.8
8.8
8.8
8.8
8.8
8.8
8.8
8.8
8.8
Distribution
Type II - Lateral Throw
Type II - Lateral Throw
Type II - Lateral Throw
Type IV - Forward Throw
Type IV - Forward Throw
Type IV - Forward Throw
Type V - Flood
Type V - Flood
Type V - Flood
Total Lumens
364
607
340
566
381
635
CRI
95
85
65
95
85
65
95
85
65
°K
2700
3000
4000
2700
3000
4000
2700
3000
4000
Life (hrs.)
50000
50000
50000
50000
50000
50000
50000
50000
50000
Volts
120V - 277V, 50/60 Hz
120V - 277V, 50/60 Hz
120V - 277V, 50/60 Hz
120V - 277V, 50/60 Hz
120V - 277V, 50/60 Hz
120V - 277V, 50/60 Hz
120V - 277V, 50/60 Hz
120V - 277V, 50/60 Hz
120V - 277V, 50/60 Hz
NOTES AND FORUMULAS
•
•
Apply appropriate light loss factors where necessary.
Photometry is LM-79 compliant.
ORDERING INFORMATION
Sample Number: 303 - A1 - LEDB1 - 3000 - UNV - T5X - BK
Color Temperature
2700= 2700K
3000= 3000K
Series
303-A1 = LED single head
adjustable ground
mount
4000= 4000K
Optics
T2 = Type II, Lateral Throw
T4 = Type IV, Forward Throw
T5X = Type V, Extra Wide Flood
Consult Factory for Other Optics
Quantity of Mini Lightbars
LEDB1 = Light Emitting Diode,
Rev B., Single Mini Lightbar
Input Voltage
UNV= Universal 120 - 277V,
50/60Hz
Dimming
DIMELV = Trailing Edge Phase
Dimming Driver
DIM10 = 0 - 10V Dimming Driver
Finish
Painted
BK = Black
Options
6=6” Stem
12= 12” Stem
18= 18” Stem
BZ = Bronze
CS = City Silver
VE = Verde
WT = White
Premium Material
NBR = Natural Brass
NBZ = Natural Bronze
NCP = Natural Copper
Notes:
* Consult your Cooper Lighting representative for additional options and finishes
Specification and Dimensions subject to change without notice.
www.cooperlighting.com
Consult your representative for additional options and finishes.
NSS = Natural Stainless Steel
BA = Brushed Aluminum