SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
NATIONAL TECHNICAL SYSTEMS – HUNTSVILLE1
7800 Highway 20 West
Huntsville, AL 35806
Rick Davis
Phone: 256 716 4483
ELECTRICAL (EMC)
Valid To: December 31, 2017
Certificate Number: 0214.40
In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to
this laboratory at the location listed above, as well as the satellite location listed below, to perform the
following Electrical and Electromagnetic Compatibility (EMC) tests:
Test
Method2
Description
Conducted Emissions
EN 55011; CISPR 11
Characteristics of Industrial, Scientific, and Medical
(ISM) Radio-Frequency Equipment
Limits and Methods of Measurement of Radio
Disturbance Characteristics of Information
Technology Equipment
Sec. 21.3, Conducted Emissions, 15 kHz to 30 MHz,
Power Leads
CE02, 30 Hz to 20 kHz, Control and Signal Leads
CE04, 20 kHz to 50 MHz, Control and Signal Leads
CE01, 30 Hz to 20 kHz, Power Leads
CE03, 20 kHz to 50 MHz, Power Leads
CE06, 10 kHz to 12.4 GHz, Antenna Terminal
CE07, Power Leads, Spikes, Time Domain
CE101, 30 Hz to 10 kHz, Power Leads
CE102, 10 kHz to 10 MHz, Power Leads
CE106, 10 kHz to 40 GHz, Antenna Terminal
EN 55022; CISPR 22
RTCA/DO-160C, D, E,
F, G
MIL-STD-461A
MIL-STD-461A
MIL-STD-461A, B, C
MIL-STD-461A, B, C
MIL-STD-461A, B, C
MIL-STD-461B, C
MIL-STD-461D, E, F
MIL-STD-461D, E, F
MIL-STD-461D, E, F
MIL-STD-462
MIL-STD-462D
(A2LA Cert. No. 0214.40) Revised 12/22/2015
Page 1 of 4
Test
Method2
Description
Conducted Immunity
EN 61000-4-6
Conducted Susceptibility, Common Mode Cable
Injection, 150 kHz to 80 MHz
EMC. Testing and Measurement Techniques.
Oscillatory Wave Immunity Test
EMC. Testing and Measurement Techniques. Test for
Immunity to Conducted, Common Mode Disturbances
in the Frequency Range 0 Hz to 150 kHz
CS01, 30 Hz to 50 kHz, Power Leads
CS02, 50 kHz to 400 MHz, Power Leads
CS03, 30 Hz to 10 GHz, Intermodulation
CS04, 30 Hz to 10 GHz, Rejection of Undesired
Signals (2 Signal Generator Method)
CS05, 30 Hz to 10 GHz, Cross-Modulation
CS06, Spikes, Power Leads
CS09, Structure (Common Mode) Current, 60 Hz to
100 kHz
CS10, Damped Sinusoidal Transients, Pins and
Terminals, 10 kHz to 100 MHz
CS11, Damped Sinusoidal Transients, Cables, 10 kHz
to 100 MHz
CS12, Common Mode Cable Current Pulse,
Interconnecting and Power Leads
CS101, 30 Hz to 150 kHz, Power Leads
CS103, 15 kHz to 10 GHz, Antenna Port,
Intermodulation
CS104, 30 Hz to 20 GHz, Antenna Port, Rejection of
Undesired Signals
CS105, 30 Hz to 20 GHz, Antenna Port,
Cross-Modulation
CS109, Structure Current, 60 Hz to 100 kHz
CS114, Bulk Current Injection, 10 kHz to 400 MHz
CS115, Bulk Cable Injection, Impulse Excitation
CS116, Damped Sinusoidal Transients, Cables and
Power Leads, 10 kHz to 100 MHz
EN 61000-4-12
EN 61000-4-16
MIL-STD-461A, B, C
MIL-STD-461A, B, C
MIL-STD-461A, B, C
MIL-STD-461A, B, C
MIL-STD-461A, B, C
MIL-STD-461A, B, C
MIL-STD-461B, C
MIL-STD-461C
MIL-STD-461C
MIL-STD-461C
MIL-STD-461D, E, F
MIL-STD-461D, E, F
MIL-STD-461D, E, F
MIL-STD-461D, E, F
MIL-STD-461D, E, F
MIL-STD-461D, E, F
MIL-STD-461D, E, F
MIL-STD-461D, E, F
MIL-STD-462
MIL-STD-462D
RTCA/DO-160C, D, E,
F, G
RTCA/DO-160C, D, E,
F, G
RTCA/DO-160C, D, E,
F, G
(A2LA Cert. No. 0214.40) Revised 12/22/2015
Sec. 17, Voltage Spikes, Power Leads
Sec. 20, Para. 20.4, Bulk Current Injection, 10 kHz to
400 MHz
Sec.18, 10 Hz to 150 kHz, Power Leads
Page 2 of 4
Test
Method2
Electrical Fast Transient EN 61000-4-4
Electrostatic Discharge
Flicker
Harmonics
EN 61000-4-2
RTCA/DO-160E, F, G
EN 61000-3-3
EN 61000-3-2
Magnetic Field
EN 61000-4-10
EN 61000-4-8
EN 61000-4-9
MIL-STD 1399
Product Family
RTCA/DO-160C, D, E,
F, G
EN 55011 (CISPR 11)
EN 55022; CISPR 22
EN 55024 (CISPR 24)
Radiated Emissions
EN 55011; CISPR 11
EN 55022 (CISPR 22)
MIL-STD-461A, B, C
MIL-STD-461A, B, C
MIL-STD-461A, B, C
MIL-STD-461D, E, F
MIL-STD-461D, E, F
MIL-STD-461D, E, F
MIL-STD-462
MIL-STD-462D
RTCA/DO-160C, D, E,
F, G
(A2LA Cert. No. 0214.40) Revised 12/22/2015
Description
Conducted Susceptibility, Electrical Fast
Transients/Burst, Signal and Powerlines and Cables
Electrostatic Discharge Susceptibility
Electrostatic Discharge
Voltage Fluctuation and Flicker
Electromagnetic Compatibility (EMC) Part 3. Limits
Section 2. Limits for Harmonic Current Emissions
(Equipment Input Current < 16 A per Phase)
Testing and Measurement Techniques. Damped
Oscillatory Magnetic Field Immunity Test
Testing and Measurement Techniques. Section 18:
Power Frequency Magnetic Field Immunity Test
Testing and Measurement Techniques. Section 9:
Pulse Magnetic Field Immunity Test
DC Magnetic Field, Sec. 070 Part 1
Interface Standard for Shipboard Systems Section
300A/B Electric Power, AC
Sec. 15, Equipment DC Magnetization Field
Characteristics of Industrial, Scientific and Medical
(ISM) Radio-Frequency Equipment
Limits and Methods of Measurement of Radio
Disturbance Characteristics of Information
Technology Equipment
Information Technology Equipment Immunity
Characteristics Limits and Methods of Measurement
Characteristics of Industrial, Scientific, and Medical
(ISM) Radio-Frequency Equipment
Limits and Methods of Measurement of Radio
Disturbance Characteristics of Information
Technology Equipment
RE01, 30 Hz to 50 kHz, Magnetic Field
RE02, 14 kHz to 10 GHz, Electric Field
RE03, 10 kHz to 40 GHz, Spurious and Harmonics,
Radiated Technique
RE101, 30 Hz to 100 kHz, Magnetic Field
RE102, 10 kHz to 18 GHz, Electric Field
RE103, Antenna Spurious and Harmonic Outputs, 10
kHz to 40 GHz
Radiated Emissions, Sec. 21, Para. 21.4, 15 kHz to
1.215 GHz, Electric Field
Page 3 of 4
Test
Method2
Description
Radiated Immunity
EN 61000-4-3
Radiated Susceptibility, 80 MHz to 1 GHz, Electric
Field
RS01, 30 Hz to 30 kHz, Magnetic Field
RS02, Magnetic and Electric Fields, Spikes and Power
Frequencies
RS03, 14 kHz to 40 GHz, Electric Field
RS06, Electromagnetic Field, Switching Pulses,
Chattering Relay
RS101, 30 Hz to 100 kHz, Magnetic Field
RS103, 14 kHz to 40 GHz, Electric Field
MIL-STD-461A, B, C
MIL-STD-461A, B, C
MIL-STD-461A, B, C
MIL-STD-461C
Surge
MIL-STD-461D, E, F
MIL-STD-461D, E, F
MIL-STD-462
MIL-STD-462D
RTCA/DO-160C, D, E,
F, G
RTCA/DO-160C, D, E,
F, G
EN 61000-4-5
IEEE C37.90.1
Voltage Dips
Interruption
RTCA/DO-160C, D, E,
F, G
EN 61000-4-11
Sec. 19, Magnetic and Electric Fields, Spikes and
Audio Frequencies
Sec. 20, Para. 20.5, 30 MHz to 18 GHz, Electric Field
Testing and Measurement Techniques Section 5:
Surge Immunity Test
IEEE Standard Surge Withstand Capability (SWC)
Test for Protective Relays and Relay Systems
Sec. 16 Normal and Abnormal Powerline Over and
Undervoltage, Surge, and Interruptions
Testing and Measurement Techniques Section 11:
Voltage Dips, Short Interruptions and Voltage
Variations Immunity Test
1
Accreditation is granted to this laboratory at the location listed above as well as the satellite laboratory
location listed below:
1 Madison Industrial Way
Madison, AL 35824
Test
Method2
Description
Conducted Emissions
(Up to 10 GHz)
OATS
EN 55011; CISPR 11
Characteristics of Industrial, Scientific, and Medical
(ISM) Radio-Frequency Equipment
EN 55022; CISPR 22
Limits and Methods of Measurement of Radio
Disturbance Characteristics of Information
Technology Equipment
2
When the date, revision or edition of a test method standard is not identified on the scope of
accreditation, the laboratory is required to be using the current version within one year of the date of
publication, per part C., Section 1 of A2LA R101 - General Requirements - Accreditation of ISO-IEC
17025 Laboratories.
(A2LA Cert. No. 0214.40) Revised 12/22/2015
Page 4 of 4
Accredited Laboratory
A2LA has accredited
NATIONAL TECHNICAL SYSTEMS - HUNTSVILLE
Huntsville, AL
for technical competence in the field of
Electrical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005
General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates
technical competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009).
Presented this 17th day of December 2015.
_______________________
President & CEO
For the Accreditation Council
Certificate Number 0214.40
Valid to December 31, 2017
For the types of tests to which this accreditation applies, please refer to the laboratory’s Electrical Scope of Accreditation.