CIRCUIT-TEST
Generators / Accessories
FUNCTION GENERATOR
The Circuit-Test Sweep Function Generator is a versatile signal source
which can be used as a function, pulse or sweep generator. It features
sine, square, triangle and pulse waveform outputs covering a frequency range of 0.02Hz to 2MHz. Using the built-in digital frequency
counter (10Hz to 2MHz) ensures simple yet accurate frequency control. Other features include a built-in continuously variable DC offset
and variable attenuation.
CSA Approved
SPECIAL INSPECTION
•
•
•
•
Frequency: 0.02Hz - 2MHz
Sine, Square or Triangle Output
Built-in Frequency Counter
Two Year Warranty
SPECIFICATIONS
SWF-7000
FREQUENCY RANGE
0.02Hz to 2MHz (7 Ranges)
VARIABLE RANGE
Each range provides 100:1 Frequency Control
OUTPUT
Sine, Triangle, Squarewave, TTL Squarewave, Pulse,
Ramp, Skewed Sinewave
FREQUENCY ACCURACY
Over 1Hz ±1 Count ± Time Base error
SQUAREWAVE RISE/FALL TIME
Variable amplitude. Less than 100nsec at max. output
SINEWAVE DISTORTION
Less than 2% from 10Hz to 100KHz
TRIANGLE WAVE NONLINEARITY
Less than 1% to 100KHz
SWEEP RATE
0.5Hz (2 sec periods) to 50Hz (20msec).
Continuously variable
OUTPUT AMPLITUDE
2Vp-p to 10Vp-p (50 Ohms). 1Vp-p to 10Vp-p (50 Ohms)
IMPEDANCE
50 Ohms, ±5%
FREQUENCY COUNTER DISPLAY
4-digits, red LED display; 10Hz ~ 2MHz
INPUT IMPEDANCE
1M Ohms
POWER REQUIREMENTS
120VAC, 60Hz
DIMENSIONS (W x H x L)
220 x 85 x 300mm (8.75 x 3.25 x 11.75")
WEIGHT
2.5Kg (5.5lbs)
AUDIO GENERATOR
CSA Approved
SPECIAL INSPECTION
•
•
•
•
The SGA-8200 Audio Generator can output a sine or square wave
from 10Hz to 1MHz. Ideal for testing audio and op-amp circuits.
Frequency: 10Hz - 1MHz
Sine or Square Wave Output
Built-in Attenuator
Two Year Warranty
SPECIFICATIONS
SGA-8200
BNC CABLES
FREQUENCY RANGE
10Hz to 1MHz (5 Ranges)
ACCURACY
10Hz to 1MHz ± (5% + 2Hz)
100Hz to 100KHz ± (3% + 2Hz)
OUTPUT IMPEDANCE
600 Ohms, unbalanced
SINE WAVE OUTPUT RANGE
10Hz to 1MHz
OUTPUT VOLTAGE
8V RMS maximum
OUTPUT DISTORTION
500Hz to 50KHz, < 0.05%
50KHz to 500KHz < 0.5%
SQUARE WAVE OUTPUT RANGE
10Hz to 100KHz
OUTPUT VOLTAGE
15V p-p max.
SYNCHRONIZATION RANGE
±1% of oscillator frequency per V RMS
INPUT IMPEDANCE
10K Ohms approx.
MAX. INPUT
10V RMS
POWER REQUIREMENTS
120VAC, 60Hz
DIMENSIONS (H x W x D)
152 x 248 x 133mm (6 x 9.75 x 5.25")
WEIGHT
3.1Kg (7lbs)
BNC ADAPTERS
BNC Plug to
BNC Plug Cables
with built in
strain reliefs.
50 ohm impedence.
TEST LEADS
TL-305
378-120
TL-310
MODEL
DESCRIPTION
200-303
BNC Cable RG58, Male to Male, 3ft
200-306
BNC Cable RG58, Male to Male, 6ft
200-309
BNC Cable RG58, Male to Male, 9ft
MODEL
DESCRIPTION
MODEL
DESCRIPTION
200-325
BNC Cable RG58, Male to Male, 25ft
378-120
BNC-Plug to 2 Binding Posts Adapter
TL-305
BNC plug to mini alligator clips. 99cm (39") cord.
200-350
BNC Cable RG58, Male to Male, 50ft
378-130
BNC-Jack to 2 Banana Plugs Adapter
TL-310
BNC plug to seizer probe tip. 91cm (36") cord.
Most items are RoHS Compliant.
RoHS
Check online for current status.
COMPLIANT
378-130
Check www.circuittest.com for current RoHS status
7