Hardware Overview
It's mobile and rugged
Only 17.4 pounds and shock/vibe tested
against tough standards (see page 8).
It's reliable
SSD for the operating system and
dedicated 1 TB hard disk (opt. SSD) for data.
150 MB/s
Continuous gap-free storing
100 MB/s
of up to 200 MB/s (with SSD).
50 MB/s
Independent sampling rate per module.
SYSTEM B
It's powerful
SYSTEM A
200 MB/s
TrendCorder with SSD
Both in a removable bay.
It's efficient
Slow speed inputs connect directly to the
EPAD connector, and do NOT use any of
your high speed channels!
It's quiet
39 dB(A)
Ingenious low noise design
typ.
It’s really easy to use
Recording by one touch!
Multi-touch functionality for fast, intuitive
navigation through your captured data
It's flexible
4 slots for user exchangeable
modules for virtually every sensor.
It's affordable
Unrivaled price/performance ratio.
You won't believe how affordable it is.
It's a safe investment
It's precise
Modules up to 1 MS/s @ 24 bit
and up to 2 MS/s @ 16 bit
Upgradeable computer engine
64 bit Windows or Linux
64 bit application software
Multi-touch operation
Acquisition
Recording
Basic recording requires no more than start - stop - view.
Freely configurable screens, triggers, markers, etc. are available, too.
Multiple measurement screens
Organize your instruments on multiple screens
to keep an fast overview.
Acquisition
Browsing and zooming during recording
Any data of
current recording
Live data
DejaView™
This special feature allows you to view the data in the past (since start of measurement)
even during long term recordings.
Analyze
Review and Analyze
The integrated multi-touch support simplifies these tasks enormously. Gestures that you use on your smart phone,
also work on the TrendCorder.
Free viewing of data anywhere
The software can be installed on any number of PCs for free,
so sharing of data sets with colleagues or customers
is easy and without any cost.
Analyze
Analyze and report in 3 rd party software
FlexPro
MATLAB ®
Microsoft ® Excel ® (and all programs using .csv files)
.csv export for Microsoft ® Excel ®
Compare multiple data files
Configuration
Input channels
Input specification
Open slots for TRION™ modules
High speed expansion
Low speed expansion 12 Hz
Main system
TrendCorder-18
TrendCorder-6
18
6
Isolated voltage and current (via ext. shunt) inputs with 1500 V isolation
16-bit resolution, 250 kS/s per channel, ADC per channel
Freely programmable 2nd, 4th, 6th and 8th order filters and ranges from ±5 mV to ±100 V
Self-check functionality and detailed DEWETRON factory calibration report included
1
3
Prepared to connect one or more front-end chassis at any time by PCIe and SYNC interfaces
EPAD2 interface included for external Low speed modules
1)
PC configuration
Data storage
2.5 GHz Intel® Core™ i5 processor, 8 GB RAM, bright 15.4” multi-touch display
6 x USB, 2 x LAN Ethernet, 1 x external monitor
64-bit Microsoft® Windows® 7 operating system
1 TB HDD dedicated for data storage (upgrade to 1 TB SSD available)
120 GB SSD for operating system and application software,
both in a single removable drive bay
Power supply (max.)
90 to 264 VAC
Dimensions (W x D x H)
Weight incl. modules
Power consumption incl. modules
462 x 320 x 135 mm (18.2 x 12.6 x 5.3 in.)
8.5 kg (18.7 lb.)
7.9 kg (17.4 lb.)
Typ. 120 W
Typ. 100 W
Environmental specifications
Operating temperature
Storage temperature
Humidity
Max. altitude
Sine vibration1) (EN 60068-2-6)
Shock1) (EN 60028-2-27)
Random vibration1) (EN 60721-3-2)
1)
0 to +50 °C, down to -20 °C with prewarmed unit
-20 to +70 °C
10 to 80 % non cond., 5 to 95 % rel. humidity
3000 m (10000 ft)
Acceleration 20 m/s², Freq. 10 Hz - 150 Hz, Sweep 1 oct/min, 20 cycles
Acceleration 30 g, duration 11 ms, pulse form half sine, 3 pumps/direction, 6 directions
Class 2M3 (spectral acceleration density 3 m²/s³, frequency range 10 Hz-200 Hz, duration 30 min/direction)
Tested with SSD
Low speed expansion
TRION module slots
Expansions
Our base models TrendCorder-18 and TrendCorder-6 are equipped with TRION-1603-LV modules. Any of the following modules can be added to these systems.
ANALOG Modules
TRION-1603-LV
6
250 kS/s
16 bit
BNC
V
6
2 MS/s
1 MS/s
16 bit
24 bit
BNC
4 to 8
204.8 kS/s
24 bit
DSUB, LEMO 0B
6
2 MS/s
1 MS/s
16 bit
24 bit
BNC
24 bit
Safety banana sockets
204.8 kS/s
24 bit
LEMO 1B, 0B, RJ-45, DSUB
204.8 kS/s
24 bit
SMB, BNC
100
TRION-2402-MULTI
V
100
TRION-1620-ACC
V
100
TRION-2402-V
V
4 or
204.8 kS/s
8 (double-slots)
1000
TRION-2402-dSTG
TRION-2402-dACC
V
10
6 to 8
V
6 to 8
100
V
1000
Connector Type
V
100
TRION-1620-LV
Sample rate
Resolution Isolation
per channel
Channels
Voltage (1000 V)
Current (shunt needed)
Bridge
IEPE
RTD
Potentiometer
Sample rate
Resolution
per channel
SuperCounter™ inputs
DIGITAL Modules
Channels
TRION-BASE
2 CTR
8 DI, 8 DIO
2 MS/s
80 MHz
LEMO, DSUB
6 CTR
18 DI
800 kS/s
80 MHz
LEMO
48 DI
2 MS/s
80 MHz
2 x 50 pin
mini centronics sockets
TRION-CNT
TRION-DI-48
Isolation
Connector Type
Low speed expansions up to 12 Hz
Module
Input type
Input ranges
Isolation
Overvoltage protection
8 isolated thermocouple
inputs for types K, J, T, E, R,
S, B, N, C, U
According
thermocouple type
350 VDC
(channel to channel and
channel to BUS,
power and chassis)
15 VDC
8 isolated Resistance
Temperature Detector
channels
Resistor: 0 to 999.99 Ω
RTD: PT100(385),
PT200 (385), PT500(385),
PT1000 (385), PT2000(385),
PT100 (3961)
350 VDC
(channel to channel and
channel to BUS,
power and chassis)
15 VDC
8 isolated current inputs
0 to 20 mA, ±20 mA, ±30 mA
350 VDC
(channel to channel and
channel to BUS,
power and chassis)
70 mA cont.
8 isolated voltage input
channels
Physical input range: ±50 V
Software selectable:
±100 mV, ±500 mV, ±1 V,
±2.5 V, ±5 V, ±10 V
350 VDC
(channel to channel and
channel to BUS,
power and chassis)
350 VDC
EPAD2-TH8-x
EPAD2-RTD8
EPAD2-LA8
EPAD2-V8
Accessories
Cables for TRION modules
TRION-CBL-L0B9-D9-0.5-00
TRION-CBL-L1B8-OE-05-00
TRION-CBL-L1B8-D9-01-00
Cable from LEMO 0B.309 plug to D-SUB-9
socket, 0.5 m. For TRION-2402-dSTG-8-L0B
Cable from Lemo 1B.308 plug to open end,
5 m. For TRION-x-dSTG-x-LEMO
Cable from LEMO 1B.308 plug to D-SUB-9
socket, 1 m.For TRION-x-dSTG-x-LEMO
LEMO-FGG.1B.308.CLAD52Z
TRION-CBL-SMB-BNC-01-00
TRION-CBL-L1B7-OE-05-00
LEMO FGG.1B.308 mating connector,
for cable diameter 4.1 to 5.0 mm
Cable from SMB plug to BNC cable-socket,
1 m. For TRION-x-dACC-x-SMB
Cable from Lemo 1B.307 plug to open end, 5 m.
For TRION-BASE and TRION-CNT-6-LEMO
AC-CBL-BNBN-02-00
AC-ADAP-BNM-BAF
AC-CBL-BNBA-02-00
Touch protected coaxial test lead
with BNC plugs, 2 m cable length
Isolated adapter 4 mm banana sockets
to BNC plug
Adapter lead, BNC male to 4 mm banana plugs,
2 m cable length
AC-CLIP-01
AC-CLIP-02
AC-CLIP-03
Isolated dolphin clip SET, 4 mm banana socket,
30 mm grip wide, red/black
Isolated crocodile clip SET, 4 mm banana
socket, 20 mm grip wide, red/black
Test clip SET, 4 mm banana socket, red/black
Cables, clips and adapters
AC-CLIP-04
Test lead SET, 4 mm banana plugs, 2 m cable
length, red/black
Microphones
SE-MIC-130E20
SE-MIC-MI-MH
General purpose ICP® microphone with
integral preamplifier, 1/4“ free-field, 45 mV/Pa,
20 Hz .. 20 kHz bandwidth, BNC jack connector
Clamp for ICP® microphone
Accessories
Shunts & Current Clamps
SE-CUR-SHUNT-01
SE-CUR-SHUNT-01-UNI
SE-CUR-SHUNT-05
20 mA shunt adaptor (50 Ohm, 1 W), Fitting into
4 mm banana jacks with 19 mm distance
(not compatible with TRION-2402-V-4-B)
DAQ-SHUNT1-UNI, 20 mA shunt adaptor
(50 Ohm) with 2 x 0.5 m cable with
banana plugs (fits to TRION-2402-V-4-B)
5 A shunt box,
Current input via 2 safety banana jacks,
output via 2 safety banana jacks
SE-CUR-SHUNT-06
SE-CUR-CLAMP-10
SE-CUR-CLAMP-20
20 A shunt box,
Current input via 2 safety banana jacks,
output via 2 safety banana jacks
AC current clamp, 10 A, voltage output
100 mV/A, 40 Hz ..10 kHz bandwidth,
1.5 m cable with banana plugs
AC current clamp, 20 / 200 A, voltage output
100 mV/A, 10 mV/A, 40 Hz ..10 kHz bandwidth,
1.5m cable with banana plugs
SE-CUR-CLAMP-600-BNC
SE-CUR-CLAMP-1400-BNC
AC/DC current clamp, 60 / 600 ADC, voltage
output 10 mV/A, 1 mV/A, 10 kHz bandwidth,
battery powered, 1.5 m cable with BNC plugs
AC/DC current clamp, 100 / 1000 AAC,
140 / 1400 ADC,voltage output 10 mV/A,
1m V/A, 10 kHz bandwidth, battery powered,
1.5 m cable with BNC plugs
Accelerometers
SE-ACC-M608A11/010AC
SE-ACC-M603C01
SE-ACC-CF
General purpose, industrial ceramic shear
ICP® accelerometer, 100 mV/g, top exit,
3 m integral cable with BNC plug,
metric M6 × 1 mounting stud included
General purpose, industrial ceramic shear
ICP® accelerometer, 100 mV/g, top exit, 2-pin
MIL connector, metric M6 × 1 mounting stud
included
MIL connector, 2-pin,
field installable,
with strain relief
SE-ACC-052BR010AC
SE-ACC-052BR030AC
SE-ACC-052BR050AC
Sensor cable, polyurethane,
2-pin-MIL connector to BNC plug,
3 m cable length
Sensor cable, polyurethane,
2-pin-MIL connector to BNC plug,
9 m cable length
Sensor cable, polyurethane,
2-pin-MIL connector to BNC plug,
15 m cable length
SE-ACC-080A121
SE-ACC-080A131
Mounting magnet, for flat surface installation,
1.0“ diameter, 35 lbs pull strength
Mounting magnet, for curved surface
installation, 1.0“ diameter, 35 lbs pull strength
DEWETRON GmbH • Parkring 4 • A-8074 Grambach • Tel +43 (0) 316 3070 0 • Fax +43 (0) 316 3070 90 • info@dewetron.com • www.trendcorder.info
DE-B140601E • All trademarks are acknowledged to be the property of their owners. Specification subject to change without notice. © DEWETRON GmbH
03/2015