CARBURETORS
HELMETS
APPAREL
ROUND SLIDES
Snowmobile carbs contain 1.5 inlet seats for fuel pumps. Carbs are set with left side idle speed adjusting screw (except 38mm
carbs that have right side idle speed adjusting screws) and include modifications to starter (choke) system for cold weather
starting.
Order No.
VM30SN-E0916
VM34SN-E0596
VM38SN-E0997
VM44SN-E0959
Carb Size
30mm
34mm
38mm
44mm
Main
Jet
250
330
360
540
Pilot
Jet
40
30
40
35
Needle
Jet
159 P-5
159 Q-0
166 Q-0
224 AA-5
Jet
Needle
6F5
6DH3
6DH3
7DH2
Slide
2.0
2.5
2.5
1.5
Choke
Type
Cable
Cable
Cable
Cable
HEADGEAR
SKIS/
STEERING
Retail
$95.95
106.95
122.95
147.95
TRACTION
TRACKS
SUSPENSION
TM SERIES FLAT SLIDES
DRIVE
BELTS
TM carburetor provides significant performance improvements over older design round slide carburetors. Air flows faster and smoother
through the TM Series venturi due to the flat slide configuration and the jet blocks which help create a smooth bore effect. The high
velocity of the air flow means a stronger vacuum at the jet needle, providing more precise metering and better throttle response.
DRIVE
POWER JET KITS
The TM Series bodies are designed to accept Power Jet Kits. Power Jet Kits are normally used on carburetors in two-stroke engine
applications to prevent leaning out during extended full-throttle running.
For Power Jet Kits see below.
ENGINE
ELECTRICAL
CONTROLS
TMX SERIES RADIAL FLAT SLIDES
Order No.
13-0109-E59311
13-0110-E59311
Mikuni TMX Carburetor features a radial flat slide design working in a smoothbore venturi that establishes a new performance standard for improved throttle response, along with a wider and stronger overall powerband from the engine.
These performance gains are provided by the radial flat slide throttle valve design which produces a 40% greater boost
signal from the air flowing past it for better throttle response and an increased sensitivity to tuning. Very minimum
tuning changes are able to produce noticeable results in engine performance.
AIR/FUEL
Carbs contain 1.8 inlet seats for fuel pumps.
WINDSHIELDS
Carb
Type-Size
TM 38mm
TMX 38mm
Main
Jet
340
340
Pilot
Jet
25
25
Needle
Jet
389 Q-2
Fixed
Jet
Needle
6FJ40
6EJ12-57
Slide
4.0
4.0
Choke
Type
Cable
Cable
Retail
$178.95
178.95
Converts standard round or flat slide carbs to power jet carbs. Power jets deliver fuel at high RPM’s allowing a reduction in the main jet of about 25%. This yields a better mid-range setting and better fuel-air mixture at the top end for
more power and improved economy (mpg).
ACCESSORIES
Description
For 30-44mm carbs - with #80, 100 and 120 stock jet
SHOP
Retail
$25.95
TRAILER
ADDITIONAL POWER JETS
Order No.
N102/221-E0910
COVERS
LUGGAGE/
SURVIVAL
POWER JET KITS
Order No.
PJK36-E5951
CHEMICALS
ATV/UTV
ACCESS.
Description
Specify Size - 50-190 (increments of 2.5), 195, 200, 220
Retail
$3.15
All numbers in BLUE are new for this year.
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
MERCHANDISING
721
HELMETS
CARBURETOR
DIMENSIONS
APPAREL
HEADGEAR
SKIS/
STEERING
A
B
C
D
E
F
G
H
I
J
K
L
Throttle Adjuster
Air Screw
TRACTION
TRACKS
Dimension
(mm)
SUSPENSION
DRIVE
BELTS
Position of Throttle
Adjuster and Air Screw
Weight (gr.)
Material
DRIVE
ENGINE
VM28
35
33
10
4
49
44
7
6
44
72
66
54
Left
Right
550
A1
VM30
40
38
8
4
44.5
48
9
8
57.5
83.4
69.7
67
Left
Right
800
A1
VM32
40
38
8
4
44.2
57.8
7
6
57.5
83.4
75
67
Left
Right
770
A1
MODEL
VM34
40
41
8
4
44.5
48
9
8
57.5
83.4
69.7
67
Left
Right
750
A1
VM36
43
41
8
4
49
67
9
8
62
79.4
79
73
Left
Right
850
A1
VM38
43
41
8
4
49
67
9
8
62
79.4
81
73
Right
Right
830
A1
g
27.5
23
25.0
25.0
28
32
25.5
h
17.5
15
15
15
15
15
15
i
35
37
40
43
43
52
52
VM40
52
50
8
4
49
67
9
8
70
79
93
99.5
Left
Right
1020
A1
ELECTRICAL
RUBBER FLANGE
DIMENSIONS
CONTROLS
(Millimeters)
AIR/FUEL
CHEMICALS
WINDSHIELDS
COVERS
Model
VM28/200
VM30/200
VM34/200
VM36/200
VM38/200
VM40/200
VM44/200
a
60
(HR) 57.2
60
70
(HD) 74.6
(HD) 74.6
84
b
8.5
8.5
8.5
8.5
8.5
8.5
8.5
c
10
10
10
10
10
10
10.5
d
60
58
60
60
60
68
67
e
31
31
37
39.5
38
47
47
f
29.5
30
35.5
38.5
38
46
46
Remarks
VM26-28
VM26-28
VM30-34
VM36-38
VM36-38
VM40-44
VM40-44
For carburetor flange applications and prices see pages 735-736.
ACCESSORIES
LUGGAGE/
SURVIVAL
SUDCO
CARBURETOR
PRODUCTS
CATALOG
SHOP
TRAILER
TUNING
MANUAL
POCKET TUNER
ATV/UTV
ACCESS.
MERCHANDISING
A complete guide to Mikuni carburetors, components, fuel pumps and accessories. 30 pages of
information.
No. 11-3955-E0520
722
If you work on snowmobiles or cycles you need this
book. Complete parts lists plus instructions and
tuning tips. 92 pages of easy to read information.
$4.95 No. MM36-E0590
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
$15.95
for all Mikuni Carburetors
Proper main jet size calculator for temperature or
elevation change.
No. 8173-E0630
$5.95
HELMETS
TM FLAT SLIDE
CARBURETOR
APPAREL
HEADGEAR
SKIS/
STEERING
TRACTION
TRACKS
SUSPENSION
ITEM NO.
31.
32.
33.
34.
35.
36.
37.
38.
ITEM NO.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
PART NO.
VM26/116
VM29/47
VM38/153
CW2-0310
VM38/152
VM20/369
(see MM36 manual)
(see MM36 manual)
VM832 2.5, VM832 4.0
VM38/159
(not available)
VM38/132
VM34/274
VM38/144
VM38/145
VM30/160
VM36/15
VM26/42
(see MM36 manual)
VM24/236
VM34/374
TM32/02-60
TM32/02-80
TM32/02-100
(not available)
CW2-0416
VM2719
VM26/227
VM28/254
VM28/817
VM28/253
VM35/40
(not available)
N2-04
603-68001
BDC36/35
VM26/46
VM18/228
DESCRIPTION
complete starter system TM28
complete starter system TM32, 34, 36, 38
nylon ring TM36, 38
screw w/lock washer all TM’s
cable connector
e-ring all TM’s
jet needle
throttle valve TM28, 32, 34
throttle valve TM36, 38
idle rod TM36, 38*
mixing chamber top
screw, jet block all TM’s
washer all TM’s
jet block TM38 left
jet block TM38 right
float pin all TM’s
float arm TM32-TM38*
cap, float pin guide all TM’s
pilot jet
float TM32-TM38
gasket, float chamber TM32-TM38
float chamber body TM32
float chamber body TM34
float chamber body TM36, 38
plate, hose retaining
screw w/lock washer TM28
screw w/lock washer TM32-38
o-ring TM28
o-ring TM32-TM38
drain plug TM28
drain plug TM32-TM38
cap, idle adjuster TM36-TM38*
packing
nut TM36, 38*
idle adjuster TM36, 38
(not applicable for TM28-TM34)
nut TM36, 38*
rubber cap TM28
rubber cap TM32-TM3
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
PART NO.
CW2-412
M18F/439
VM36/83
B30/247
776-19002
VM28/1045
VM38/127
730-15001
VM2750
(see MM36 manual)
VM28/429
VM34/454
(see MM36 manual)
VM24/559
KV/10
VM24/557-2.5
VM38 3.3
VM38 1.5
VM38 1.8
786-46001-2.0
VM38 3.5
VM24/560
C2-0408
C2-0406
(not available)
VM28/1044
(not available)
BV15/27
CW2-0412
VM20/584
VM2720
(VM20/305)
M12F/46A
VM12/33
N133/037
(see MM36 manual)
(not available)
VM17/1002-15
VM17/1002-60
VM17/1002-80
603-27002
VM15/112
VM14/75
BV32/04
VM14/87
DESCRIPTION
screw w/lock washer all TM’s
cable adjuster TM28
cable adjuster TM32-TM38
locknut all TM’s
mixing chamber top TM36-TM38*
gasket, top TM28
gasket, top TM36-TM38
spring, throttle valve TM28
spring, throttle valve TM36-TM38*
needle jet
ring, main jet TM28
ring, main jet TM32-TM38
main jet
o-ring TM28
o-ring TM32-TM38
needle & seat assy. TM28
needle & seat assy. TM32-TM38
needle & seat assy. options
needle & seat assy. options
needle & seat assy. options
needle & seat assy. option
plate, needle valve all TM’s
screw TM28
screw TM32-TM38
vent hose
gasket, front cover TM28
front body, air intake
bolt TM38*
screw all TM’s
air screw, pilot TM28
air screw, pilot TM32-TM38
DRIVE
BELTS
DRIVE
ENGINE
ELECTRICAL
CONTROLS
AIR/FUEL
CHEMICALS
WINDSHIELDS
COVERS
spring, pilot air screw all TM’s
washer, pilot air screw TM32-TM38*
o-ring, pilot air screw TM32-TM38*
air jet
overflow hose
starter jet TM28
starter jet TM32
starter jet TM34-TM38
idle stop screw TM28*
spring, idle screw TM28*
o-ring TM28
o-ring TM32-34*
washer TM28*
ACCESSORIES
LUGGAGE/
SURVIVAL
SHOP
TRAILER
*Not available or applicable to other models.
ATV/UTV
ACCESS.
NOTE: Flatslide carburetor parts can be ordered by locating a similar part
in the above diagram and looking up the corresponding part.
All numbers in BLUE are new for this year.
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
723
MERCHANDISING
CARBURETOR
HELMETS
APPAREL
HEADGEAR
SKIS/
STEERING
TRACTION
TRACKS
SUSPENSION
DRIVE
BELTS
DRIVE
ENGINE
ELECTRICAL
CONTROLS
AIR/FUEL
CHEMICALS
WINDSHIELDS
COVERS
ACCESSORIES
LUGGAGE/
SURVIVAL
SHOP
TRAILER
ATV/UTV
ACCESS.
MERCHANDISING
Ref.
No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
35a.
36.
37.
38.
39.
40.
41.
42.
43.
44.
724
Description
throttle cable rubber cap
cable adjuster
cable adjuster locknut
mixing chamber top
mixing chamber top gasket
throttle valve spring
spring seat plate
needle positioning clip
needle
throttle valve
needle jet
starter plunger rubber cap
starter plunger fitting
starter lever
starter lever spring plate
starter plunger spring
starter plunger
mixing chamber body
float bowl gasket
float bowl baffle plate
pilot jet
float arm hinge pin
float arm
float
float bowl
main jet plug washer
main jet plug
air jet
air adjusting screw
air adjusting screw spring
idle adjusting screw spring
idle adjusting screw
needle valve washer
needle valve
main jet ring
washer
main jet
vent tube anchor plate
float bowl screw
guide screw
needle jet setter
needle jet setter o-ring
washer, banjo belt
banjo belt
rubber flange adapter
All numbers in BLUE are new for this year.
For Order No. and Price List, see Mikuni parts on pages 727-730.
Ultra Dealers Buy For Less - Ask Us About It
ORIGINAL PARTS
HELMETS
1. THROTTLE CABLE RUBBER CAP
Order No.
VM26/46-E0110
Application
All Mikuni Carburetors
Retail
$1.85
9. NEEDLE (see Mikuni manual no. MM36)
1a. COMPLETE STARTER SYSTEM, TM Flatside
Order No.
VM29/47-E0550
TM38/57-E5950
Application
TM32, 34, 36, 38
TMX35/38, TMS38
APPAREL
Retail
$9.15
9.95
Order No.
5 series-E0430
6 series-E0430
Sizes
5DP7, 5F21, 5F3, 5L1
6DH2, 6DH3, 6DH4, 6DH7, 6DH8,
6DJ30, 6DP1, 6DP17, 6EJ12-57, 6F15,
6F21, 6F4, 6F5, 6F8, 6F9, 6FJ40, 6FJ41,
6FJ6, 6FM46, 6L1, 6N1
7DH2, 7DH3, 7DH5, 7F7, 7F8
7 series-E5440
2. CABLE ADJUSTER
Order No.
11-2344-E5210
VM28/256-E5020
VM221-E0830
VM38/152-E5930
Application
6mm Cable Housing
7mm Cable Housing
45° Angle Adjuster
VM221 includes rubber cap
Retail
$2.15
3.40
TM36 and 38mm
$6.60
TM CABLE CONNECTOR
Application
All 22 thru 24mm
All 30 thru 34mm
All 36 and 38mm
All 40 and 44mm
Application
29mm Smoothbore
$4.50
VM34/55-E5810
VM44/13-E0350
VM2750-E5240
Retail
$6.95
6.95
18.50
18.50
Retail
$3.10
10. THROTTLE VALVE (SLIDE)
Order No.
VM34/110-E0671
VM36/36-E5922
VM38/24-E5922
VM38/52-E5922
VM40/02-E5992
VM44/23-E5922
VM832-E5932
Specify Cutaway Size
1.5, 2.0, 2.5, 3.0
2.5, 3.0
1.5, 2.0, 2.5, 3.0
2.5, 3.0
1.5, 2.5, 3.5
1.5, 2.5, 3.5
Fits: TM36FS & TM38FS
2.5, 4.0
Idle Position
left
left
right
left
left
left
–
Retail
$29.35
38.30
38.30
38.30
49.95
38.30
3.10
3.10
8.85
7.10
Retail
$2.90
VM35/09-E0110
VM44/09-E5020
VM38/153-E5710
TM36 and 38mm
$2.90
2.65
1.85
3.40
Application
All needles, Order 10/bag
CONTROLS
CHEMICALS
Obtain proper applications from Mikuni manual part no. MM36.
WINDSHIELDS
11. NEEDLE JET
Order No.
159-E5980
169-E5980
175-E5980
176-E5980
224-E5201
247-E5980
261-E5980
389-E5980
480-E5980
Size (#)
O-4, O-8, P-0, P-2, P-4, P-5, P-6, P-8,
Q-0, Q-2, Q-4, Q-5, Q-6, Q-8, R-3
O-8, P-2, P-5
P-6, P-8
N-0, N-2, N-4, N-8, O-0, O-4, O-5, Q-2,
R-0, R-2, R-4, R-6
AA-0, AA-5, BB-0, BB-5, Z-5
P-4, P-6, P-8, Q-0, Q-2, Q-4, Q-8
O-8
Q-2, Q-4, Q-6, Q-8, R-2, R-4 - Fits TM38GS
P-2, P-4, P-6, P-8, Q-0, Q-2, Q-4, Q-6, Q-8
Retail
COVERS
$14.75
14.75
14.75
14.75
17.10
14.75
14.75
14.75
14.75
Order 5/pkg.
Retail
$1.45 ea.
30 thru 44mm Spigot w/24 thru 34mm Flange
Order No.
VM20/455-E0800
Retail
$1.35
All numbers in BLUE are new for this year.
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
ACCESSORIES
LUGGAGE/
SURVIVAL
SHOP
TRAILER
12. STARTER PLUNGER RUBBER CAP
8. NEEDLE POSITIONING CLIP
Order No.
VM20/369-E5800
ELECTRICAL
39.95
Retail
$2.80
Application
28mm Spigot
30-34mm Spigot
32-34mm Flange
36-38mm Spigot
40-44mm Spigot
TM NYLON RING
ENGINE
AIR/FUEL
7. SPRING SEAT PLATE
Order No.
VM28/132-E5710
VM34/31-E0610
TRACKS
DRIVE
BELTS
6. THROTTLE VALVE SPRING
Application
28mm Spigot
30 thru 34mm Spigot
32 and 34mm Flange
All 36 and 38mm Spigot
All 40 and 44mm Spigot
36-38mm Flatslide
TRACTION
SUSPENSION
NOTE: For round slide carbs gasket comes with mixing chamber top.
Order No.
VM28/58-E0710
VM34/50-E5810
SKIS/
STEERING
DRIVE
5. MIXING CHAMBER TOP GASKET
Order No.
VM28/549-E5810
5.65
7.45
Obtain proper applications from
Mikuni manual part no. MM36.
6.35
4. MIXING CHAMBER TOP WITH GASKET
Order No.
VM26/56-E0640
VM34/27-E0640
VM36/09-E5611
VM44/05-E5611
NEEDLE SHIMS
(sold 12/pkg.) .106” Diameter x .25” outer diameter x.020” (.5mm) thick
11-7758-E5720
HEADGEAR
Retail
$5.65
725
ATV/UTV
ACCESS.
MERCHANDISING
ORIGINAL PARTS
HELMETS
APPAREL
HEADGEAR
SKIS/
STEERING
Order No.
VM20/456-E5710
VM15/37-E5710
SUSPENSION
DRIVE
BELTS
DRIVE
ENGINE
Application
30 thru 44mm Spigot
24 thru 34mm Flange
CABLE TYPE
30 thru 44mm Spigot
24 thru 34mm Flange
Retail
Application
30 thru 44mm Spigot
30 thru 34mm Flange
Retail
$2.90
Order No.
VM22/210-E0910
$2.90
Order No.
VM32/53-E5950
$9.95
16. STARTER PLUNGER SPRING
Order No.
VM14SC11/89-E0010
VM15SC6/89-E0110
Application
26 thru 44mm Spigot
24 thru 34mm Flange
17. STARTER PLUNGER
Order No.
VM15SC4/85-E0820
VM18/144-E5920
VM38/06-E5760
VM14SC11/99-E5900
Type Application
cable 30 thru 44mm Spigot
lever
30 thru 44mm Spigot
pull-up 36 thru 44mm Spigot
RETAINING CLIP
for VM38/06 plunger
Retail
$4.70
4.90
11.25
$1.55
Includes no. 12-17
Retail
$3.15
Application
’73-78 Z1, GS750,
Sizes: #15, 17.5, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65
Retail
$3.55
BS30/96
Order No.
BS30/96-E5120
Application
Most OEM CV Carbs,
Sizes: #30, 35, 37.5, 40, 42.5, 45,
47.5, 50, 52.5, 55, 57.5, 60
Retail
$3.55
M28/1001
Order No.
M28/1001-E0910
Converts cable operated chokes to lever type.
Order No.
VM350-E5411
Application
Most Mikuni Carbs,
Sizes: #10, 15, 17.5, 20, 22.5,
25, 27.5, 30, 32.5, 35, 37.5,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 110
VM28/486
Order No.
VM28/486-E5120
Retail
$1.60
1.85
18. LEVER STARTER SYSTEM (Complete)
ELECTRICAL
VM22/210
14. STARTER LEVER
TRACTION
TRACKS
21. PILOT JET (Order 4/pkg.)
13. STARTER PLUNGER FITTING
Retail
$19.10
Application
22 flange, 2 cycle Banshee, Blaster, RZ,
YSR50, 1000cc
Sizes: #15, 17.5, 20, 25, 27.5, 30,
32.5, 35, 37.5, 40, 42.5, 45, 47.5, 50,
55, 65, 70
Retail
$3.15
CONTROLS
N224/103
Order No.
N224/103-E5920
AIR/FUEL
CHEMICALS
Application
TMX36 carbs
Sizes: #20, 22.5, 25, 27.5, 30, 32.5,
35, 37.5, 40, 45, 50, 55, 60, 65
Retail
$4.85
22. FLOAT ARM HINGE PIN
Order No.
BV26/22-E5010
WINDSHIELDS
COVERS
ACCESSORIES
LUGGAGE/
SURVIVAL
SHOP
TRAILER
ATV/UTV
ACCESS.
MERCHANDISING
18a. CHOKE CONVERSION KIT
VM30/160-E5210
Includes all parts necessary to convert lever operated choke carburetors (30-44mm)
to cable operation.
Order No.
L458-E5970
Retail
$13.30
19. FLOAT BOWL GASKET
Order No.
VM28/129-E0320
VM30/103-E0320
VM36/20-E0320
VM30/172-E0320
VM30/257-E0130
VM34/374-E0320
TM38/52-E0420
Application
28mm Spigot
26mm thru 34mm Flange
36 thru 44mm Spigot
30mm Small Body Spigot
33mm Smoothbore
36-38mm Flat Slide
35-38mm TMX
Retail
$3.85
3.85
3.85
3.85
5.20
3.85
4.05
20. FLOAT BOWL BAFFLE PLATE
Order No.
VM36/16-E0770
726
Application
36 and 38mm Spigot
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
Retail
$12.90
Application
26 thru 44mm Spigot
24 thru 34mm Flange
28-38mm Flat Side
Retail
Application
26 thru 34mm Flange
28mm Spigot
30 thru 34mm Spigot (33mm wide)
30 thru 34mm Spigot (39mm wide)
36 thru 44mm Spigot
36-38mm Flatslide
Retail
$3.75
6.25
3.10
6.25
$1.75
2.15
23. FLOAT ARM
Order No.
VM28/59-E5220
VM28/166-E5730
VM34/41-E5810
VM34/73-E5730
VM36/15-E5730
6.25
24a. FLOAT
Independent type - non corrosive plastic compound. Standard
in 26-44mm Spigot and Flange type carburetors.
Order 2/carb.
Order No.
VM28/164-E5270
VM34/61-E0340
VM24/236-E5850
Application
26 and 28mm Spigot
30 thru 34mm Spigot w/baffle plate
36 thru 44mm Spigot
Retail
$12.10
7.20
9.80
ORIGINAL PARTS
33. NEEDLE VALVE WASHER
24b. FLOAT
Twin Float Type - Brass, std. in 18-24mm Flange and Clamp-on Carbs.
Order No.
VM24/171-E0670
Application
24-26mm Flange Type
Retail
$12.60
Order No.
B34/52-E5800
VM26/25-E0700
Application
30 thru 44mm Spigot
24 thru 30mm Flange
28mm Spigot
HELMETS
Retail
$1.45
1.10
34. NEEDLE VALVE -Needle and Seat Assembly
HEADGEAR
25. FLOAT BOWL - Standard Type
Order No.
VM34/68-E5922
VM36/07-E5922
Application
30-34mm Spigot Type
36-38mm Spigot Type
VM26/26
Order No.
VM26/26-E0511
26. MAIN JET PLUG WASHER
Order No.
VM28/134-E5900
VM28/254-E5010
Application
28, 40 and 44mm Spigot
29mm Smoothbore
Application
24 thru 30mm Flange
28mm Spigot
Sizes 1.5, 2.0, 2.5, 2.8
Retail
$1.55
1.75
Application
28, 40 and 44mm Spigot
30 thru 34mm Spigot
29mm Smoothbore
Retail
$4.15
6.25
6.25
28. AIR JET
Order No.
VM28/163-E0511
VM28/511-E5921
Meters air to needle jet for fine tuning 26-44mm Spigot carbs.
Application/Sizes
.5, .7, .8, .9, 1.0, 1.2, 1.3, 1.5, 2.0
Application
30 thru 44mm Spigot
32 and 34mm Flange
Sizes 1.5, 2.0, 2.5, 3.0
30 thru 44mm Spigot
32 and 34mm Flange
Size 3.3 (3-hole)
30 thru 38mm Spigot
(with Viton tip)
Size 1.5
Retail
$3.15
VM2720-E0120
Application
26mm thru 44mm Spigot
24 thru 34mm Flange
32-38mm Flatside
Retail
Order No.
VM38/11-E5251
$4.15
3.45
Application
26 thru 44mm Spigot
24 thru 34mm Flange
36-38mm Flatslide
DRIVE
BELTS
DRIVE
18.95
21.40
ENGINE
ELECTRICAL
CONTROLS
AIR/FUEL
Application
30 thru 44mm Spigot
Size 3.5 (6-hole)
Retail
$24.95
CHEMICALS
WINDSHIELDS
30. AIR ADJUSTING SCREW SPRING
Order No.
M12F/46A-E0110
TRACKS
$18.95
VM38/11
Retail
TRACTION
SUSPENSION
9mm hex with
10mm threads
29. AIR ADJUSTING SCREW
Order No.
VM20/214-E0520
$18.95
VM28/163, VM34/39
VM34/39-E0511
Order No.
BS30/97-E0910
Retail
9mm hex with
10mm threads
27. MAIN JET PLUG
Order No.
VM28/133-E0520
VM34/42-E5730
VM28/253-E5730
SKIS/
STEERING
10mm hex with
9mm threads
Retail
$38.30
38.30
APPAREL
Retail
Order No.
VM38-E0511
$1.85
Application
all TM Flatslides (except TMX model)
Sizes 1.5, 1.8, 3.3, 3.5
Retail
COVERS
$18.95
ACCESSORIES
31. IDLE ADJUSTING SCREW SPRING
Order No.
M20/11-E0110
Application
26 thru 44mm Spigot
24 thru 34mm Flange
N122/032
$1.85
Order No.
N122/032-E5221
32. IDLE ADJUSTING SCREW
Order No.
VM22/171-E5720
VM24/224-E5720
VM28/142-E5720
Application
30mm Flange
36 and 38mm Spigot
28, 34, 40 & 44mm Spigot
24 thru 34mm Flange
30mm Spigot
Retail
LUGGAGE/
SURVIVAL
10mm hex with
10mm threads
Retail
Application
29mm Smoothbore
Size 2.5
Retail
$19.95
TRAILER
35. MAIN JET RING
Acts as a cup around the main jet to prevent breaking and bubbling
of fuel when crossing rough terrain or leaning the vehicle.
ATV/UTV
ACCESS.
$4.55
4.55
4.55
Order No.
VM28/228-E5840
VM36/17-E5480
Application
28, 40 and 44mm Spigot
30 thru 38mm Spigot
All numbers in BLUE are new for this year.
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
SHOP
Retail
$8.00
14.15
727
MERCHANDISING
HELMETS
APPAREL
HEADGEAR
ORIGINAL PARTS
37. VENT TUBE ANCHOR PLATE
35a. MAIN JET WASHER
Order No.
VM20/169-E0700
Application
All Mikuni Carburetors
without main jet ring
4042
TRACTION
SUSPENSION
DRIVE
BELTS
Order No.
VM28/79A-E5410
Application
28 thru 44mm Spigot
Retail
$2.40
$1.10
36. MAIN JETS - Order all main jets 4/pkg.
SKIS/
STEERING
TRACKS
Retail
38. FLOAT BOWL SCREW - Order 5/pkg.
Order No.
C2-0518-E0600
VM2719-E0600
Replaces
Mikuni no.
4/042
Order No.
Application
4042-E0910
Large Hex Type
Sizes: 85, 90, 95, 100, 110, 115, 120, 125, 130, 135,
140, 150, 155, 160, 165, 170, 180, 185, 190, 200, 210,
220, 230, 240, 250, 260, 270, 280, 290, 300, 310, 320,
330, 340, 350, 360, 370, 380, 390, 400, 410, 420, 430,
440, 450, 460, 470, 480, 490, 500, 540, 560, 580, 600,
620, 640, 660, 680, 700
Retail
$3.15
Application
30 thru 44mm Spigot, 5mm x 16mm
32-38mm Flatslide, 5mm X 18mm with
lock washer
Retail
$1.05
1.05
39. GUIDE SCREW
Comes in certain carburetors only. It extends the needle jet to allow a larger needle
to operate without hitting the main jet. It also performs the same function as a main
jet ring.
Order No.
Application
Retail
VM38/09-E0440
38mm Spigot with
$7.30
Needle Jet Series #166
40. NEEDLE JET SETTER
DRIVE
Holds the Needle Jet in position
ENGINE
ELECTRICAL
CONTROLS
AIR/FUEL
Order No.
VM28/53-E5730
N100/604
Order No.
Application
N100/604-E0910
Large Round Type, Used in smoothbores.
Sizes: 50, 52.5, 55, 57.5, 60, 62.5, 65, 67.5, 70, 72.5, 75,
77.5, 80, 82.5, 85, 87.5, 90, 92.5, 95, 97.5, 100, 102.5, 105,
107.5, 110, 112.5, 115, 117.5, 120, 122.5, 125, 127.5, 130,
132.5, 135, 137.5, 140, 142.5, 145, 147.5, 150, 152.5, 155,
157.5, 160, 162.5, 165, 167.5, 170, 172.5, 175, 177.5, 180,
182.5, 185, 187.5, 190, 192.5, 195, 200
Retail
Application
26 thru 34mm Flange
Retail
$2.25
41. NEEDLE JET SETTER “O” RING
Order 5/pkg.
Order No.
BV32/04-E5310
$3.15
Application
22 thru 34mm Flange
Retail
$2.25
42. BANJO BOLT WASHER
Order 5/pkg.
CHEMICALS
Order No.
VM26/125-E0600
VM26/124-E0600
WINDSHIELDS
Application
22mm Flange
24 thru 34mm Flange
Retail
$1.05
1.05
Application
22 and 24mm Flange
26 thru 34mm Flange
Retail
$6.25
6.25
M10/14
COVERS
ACCESSORIES
Order No.
Application
M10/14-E0910
Small Hex Type
Sizes: 110, 125, 140, 150, 155, 160, 180, 185, 190, 200
Retail
$3.15
LUGGAGE/
SURVIVAL
Order 5/pkg.
N102/221
ATV/UTV
ACCESS.
MERCHANDISING
Order No.
VM24/286-E5730
VM28/61A-E5730
TM FLATSLIDE
51. PILOT AIR SCREW WASHER
SHOP
TRAILER
43. BANJO BOLT
Order No.
Application
N102/221-E0910
Small Round Type
Sizes: 50, 52.5, 55, 57.5, 60, 62.5, 65, 67.5, 70, 72.5, 75,
77.5, 80, 82.5, 85, 87.5, 90, 92.5, 95, 97.5, 100, 102.5, 105,
107.5, 110, 112.5, 115, 117.5, 120, 122.5, 125, 127.5, 130,
132.5, 135, 137.5, 140, 142.5, 145, 147.5, 150, 152.5, 155,
157.5, 160, 162.5, 165, 167.5, 170, 172.5, 175, 177.5, 180,
182.5, 185, 187.5, 190, 195, 200, 220
728
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
Retail
Order No.
VM12/33-E0700
Application
TM32 thru 38mm
Retail
$1.10
52. PILOT AIR SCREW “O” RING
Order 5/pkg.
$3.15
Order No.
N133/037-E5800
Application
TM32 thru 38mm
Retail
$1.45
CARB REPAIR KITS
HELMETS
O.E.M carburetor
service parts
APPAREL
HEADGEAR
CARB REPAIR KITS
SKIS/
STEERING
for Mikuni Float Style Carburetors
Order No.
L452-K0540
L453-K5450
L454-K5750
Description
30mm carbs (zinc)
32mm carbs (zinc)
34mm carbs (zinc)
Retail
$7.55
8.95
9.60
TRACTION
TRACKS
COMPLETE REPAIR KIT
SUSPENSION
WR, WRA, WD, WDA, and WF SERIES
No. 300-719-E0564
No. 300-794-E5923
WD, WDA, WDB, WR, WRA
WF models
(includes idle needle)
DRIVE
BELTS
$74.95
54.95
FUEL PUMP LEAF SPRING
No. 98-215-E5710
WD, WDA, WR, WRA
DRIVE
UNIVERSAL KITS
$2.95
for Mikuni Carburetors
Order No.
L433-K5960
L434-K5970
L435-K5960
Description
VM30, 32 & VM34 models (zinc)
VM36 & VM38 models (aluminum)
VM30, 32 & VM34 models (alum.)
ENGINE
Retail
$11.95
12.95
11.95
ELECTRICAL
CONTROLS
MIKUNI BUTTERFLY TYPE CARB
DIAPHRAGM AND GASKET SETS
AIR/FUEL
CHEMICALS
WINDSHIELDS
GASKET/DIAPHRAGM KIT
No. 92-534-E5942
WD1-WD38 (all), WDA (all),
WDB30, WDB31,
WR1-WR27 (all), WRA30,
WRA37, WRD2
COVERS
Repair carbs on Rupp, Chaparral and Xenoah water cooled engines.
$41.95
No. L405-K5950
$9.95
ACCESSORIES
LUGGAGE/
SURVIVAL
SHOP
TRAILER
ATV/UTV
ACCESS.
DIAPHRAGM and GASKET SET
KEIHIN CARBURETORS
No. L459-K5901
$17.95
Repair carbs on Rupp, Chaparral and Xenoah fan cooled engines.
No. 8812-K5950
All numbers in BLUE are new for this year.
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
$9.95
729
MERCHANDISING
FUEL SYSTEM
HELMETS
CARBURETOR KITS
APPAREL
for MIKUNI
BN34/38/44mm
HEADGEAR
SKIS/
STEERING
TRACTION
TRACKS
SUSPENSION
DRIVE
BELTS
11-0289
Fits Bombardier Sea Doo ’88-90; Fazor I/II/III ’87-90; Kawasaki JS300/SX
’86-91, JS400 ’76, JS440 ’77-90, JS550/SX ’82-90; Wet Jet, Sport II, Sport
II Spirit ’86-91; Yamaha WJ500 Wave Jammer ’87-90, WR500 Wave Runner
’87-89, WR650LX ’90.
Gasket and Diaphragm Kit
No. 11-0289-K5380
Made in USA
CARBURETOR REPAIR KITS
TILLOTSON UNIVERSAL
$13.95
Includes metering needle.
Complete Carb Kit
Genuine Mikuni complete with gaskets, diaphragms, check valves, washers,
o-rings, arm pin, spring and arm.
No. L465-E0561
No. L466-E5761
No. 11-1463-K5991
If needle with slot for fork is needed, order no L409 needle and seat.
Mikuni kit
$31.95
HR Series, replaces RK1HR
HD Series, replaces RK1HD
$27.55
27.95
DRIVE
ENGINE
METERING DIAPHRAGM
for TILLOTSON CARBS
ELECTRICAL
CONTROLS
No. L403-E0120
No. L404-E0120
All HD carbs
All HR/HL carbs
$3.50
3.50
AIR/FUEL
CHEMICALS
DIAPHRAGM and GASKET SETS
for TILLOTSON CARBS
WINDSHIELDS
No. L401-E5740
COVERS
All HR carbs (DG1HR)
Replaces Rotax 404-0282-00
All HD carbs (DG1HD)
Replaces Rotax 404-0281-00
No. L402-E5740
ACCESSORIES
RESILIENT NEEDLE,
SEAT and GASKET
SETS
$7.95
7.95
TILLOTSON APPLICATION
HL/HR replaces 233-660/233-672
LUGGAGE/
SURVIVAL
No. L406-E0530
$5.85
HD replaces 233-673
PLUGS
for TILLOTSON CARBS
SHOP
No. L407-E0540
No. L409-E5950
Order 20/pkg, priced each.
TRAILER
7.50
HD replaces 233-682 (Needle has slot for fork)
Made by MIKUNI
9.95
VM30 thru VM44 spigot carbs using fuel pumps
ATV/UTV
ACCESS.
HL/HR plug replaces 02531 .375” dia.
No. L397-E5200
$0.45 ea.
HD plug replaces 04326 .440” dia.
MERCHANDISING
No. L398-E5200
730
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
No. VM28/163 #1.5-E0511
Made by WALBRO
$18.95
WR, WD and WDA models (needle only)
0.45 ea.
No. 82-30-E5930
$6.50
CHAIN Walbro
SAWGasket
CARBURETOR
REPAIR KITS
and Diaphragm Kits with Inlet Needle
HELMETS
These kits are manufactured and packaged by Walbro Corporation.
APPAREL
HEADGEAR
SKIS/
STEERING
Walbro SDC Carb
Fits: Walbro SDC carbs. Replaces repair kit no. K10 and gasket/ diaphragm
kit no. D10. Replaces no. 350-501/2.
Walbro WT Carb
No. 11-3065-K0590
$15.95
No. 11-3069-K5980
TRACTION
$14.95
TRACKS
SUSPENSION
DRIVE
BELTS
DRIVE
Walbro WA Carb
Walbro WB Carb
Fits: Walbro WA carbs. Replaces nos. 300-949, 350-534, 510, 512, 516,
521, 522, 530, 533, 541, 542, 543, 545, 548 and 558.
Fits: Walbro WB3A, WB3A/7A carbs.
No. 11-3070-K5270
No. 8099-E5740
$11.95
ENGINE
$7.95
WALBRO/TILLOTSON
INLET NEEDLES
ELECTRICAL
CONTROLS
AIR/FUEL
Helps eliminate troublesome leakage, improves idle
and overall performance.
Original Walbro parts.
CHEMICALS
Walbro HDA Carb
Fits: Walbro HDA carbs. Replaces repair kit nos. K10, K11, K12 and gasket/
diaphragm kit nos. D10 and D11.
No. 11-3063-K5880
$14.75
Walbro nos. 82-75 and 82-26. 16.5mm long style, fits WA, WT, HDC, SDC,
WS, WB and many HDA carbs. Replaces Tillotson 34-188 (HU, HS and HL).
No. 8226-E5910
$3.25 ea.
WINDSHIELDS
COVERS
ACCESSORIES
LUGGAGE/
SURVIVAL
ULTRA DEALERS BUY FOR LESS
Ask for Details
SHOP
SAVE FREIGHT
ORDER OVER $300
TRAILER
ULTRA DEALERS SAVE FREIGHT
Walbro HDC Carb
Fits: Walbro HDC carbs. Replaces repair kit no. K10 and gasket/diaphragm kit
no. D10. Replaces no. 350-503 and 350-508.
No. 11-3068-K5960
ATV/UTV
ACCESS.
$11.50
MERCHANDISING
All numbers in BLUE are new for this year.
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
731
CHAIN SAW CARBURETOR
GASKET and DIAPHRAGM KITS
HELMETS
CHAIN SAW
SERVICE
MANUAL
APPAREL
HEADGEAR
SKIS/
STEERING
TRACTION
Over 455 pages of everything you need to know to tear down, repair,
reassemble and adjust most popular chain saws. Covers Homelite,
Husqvarna, McCulloch, Poulan, Remington, Skil and Stihl, plus many
others including electric saws plus over 25 brands of gasoline saws.
TRACKS
TILLOTSON
SUSPENSION
Replaces: DG-1HU. Fits Carb model HU.
No. 8100-E5220
$3.75
No. 8346-E5122
$36.95
DRIVE
BELTS
DRIVE
ENGINE
BRIGGS & STRATTON
MANUAL
ELECTRICAL
CONTROLS
AIR/FUEL
CHEMICALS
WINDSHIELDS
TILLOTSON
Replaces:RK-17HS, no. 012910. Fits: Carb model HS. Includes:
welch plug, screen and inlet needle.
2-12.5 hp. aluminum L-head engines. Manual covers service, repair
and maintenance.
No. 8102-E5920
No. 11-2440-E5901
$4.95
$18.25
COVERS
ACCESSORIES
LUGGAGE/
SURVIVAL
SHOP
TRAILER
ATV/UTV
ACCESS.
MERCHANDISING
WALBRO IN TANK FUEL FILTERS
TILLOTSON
Replaces: DG-2HL. Fits: Carb model HL.
No. 8103-E5320
732
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
$3.95
Fits up to 30cc engines with .125” fuel line.
No. 125-527-E5920
order 10/display
$4.95 ea.
Fits up to 80cc engines with .125” fuel line.
No. 125-528-E5920
order 10/display
$4.95 ea.