Unvented and Vented Stainless Hot Water Cylinders www.joule-pl.pl Introduction Joule was formed in 2008 to offer the heating, plumbing and hardware merchant network a service that was based on product expertise and knowledge, large stock holding, short delivery times and a nationwide distribution network. The strength of this offering can be seen in the quality and innovation of our product range in renewables, hot water production & storage. From humble beginnings Joule rapidly grew to become Ireland’s premier supplier of solar thermal and hot water storage solutions. In 2010 Joule opened its fast manufacturing facility in Dublin. This facility had an output capacity of 24,000 units per annum working on a single shift per day. Along with the manufacturing, Joule also opened Irelands most advanced solar thermal training centre. Joule believe that we must work with all stakeholders in providing the customer an outstanding service and investing in training for installers is just another small example of this philosophy. In 2011 Joule opened its first distribution centre in Cheshire, UK. The UK arm of the Joule Group is rapidly expanding. With Joule’s innovative product range and drive for excellence in customer service, demand is quickly growing through our Cheshire distribution centre. Joule UK is continuing to offer customers excellence in product & service and the result of this will help Joule UK to become one of the UK’s favourite Solar Thermal & Hot Water Storage suppliers. Joule Poland is the Joule Group’s latest development. Demand for high quality stainless steel hot water storage cylinders is rising across Europe and particularly in Poland. Joule’s product range is proving very popular and to meet this demand the Joule Group has recently opened a distribution centre in Poland. This demand is a testament to Joule’s quality in both product and service. NSAI Agrément NSAI_Certification_1Col NSAI_Agrement_2Col NSAI_Agrement_1Col NSAI_Certification_Blk NSAI_Agrement_Rev NSAI_Agrement_Blk ification_Wht All white version also available: NSAI_Agrement_Wht 3 / 20 Key advantages Cyclone Responding rapidly to changing market expectations we have evolved the Joule Cyclone vented and unvented stainless steel cylinders. All our Cylinders are formed from stainless steel, continuing our phylosophy of only using the finest materials. We are so confident in our construction that we offer a 25 year limited guarantee* on most of the Cyclone range. To keep a breast with developments the Joule Cyclone range has many key advantages. Domestic Selection Sizing Guide These recommendations are based on the guidelines in BS 6700. Guidance should be sought for unusual applications, e.g. high flow rate showers, large baths, etc. Hot Water Demand Bedrooms Gas / Oil Indirect Units Electric Indirect Units 1 Standard Bath or Shower Bedsit / 1 Bed 150 150 2-3 Bed 150 200 3-4 Bed 150 200 2-3 Bed 150 200 3-4 Bed 150 200 2-3 Bed 150 200 3-4 Bed 150 200 4-5 Bed 200 200 2-3 Bed 200 200 3-4 Bed 200 200 4-5 Bed 200 250 3-4 Bed 250 300 4-5 Bed 250 300 5-6 Bed 300 300 1 Standard Bath Butt Welding 1 Bath & En-Suite All Cyclone cylinders are butt seam welded, this gives greater rigidity and removes the threat of crevice corrosion associated with some cylinders. Flexible Connections Joule recognise that sometimes the need for 1” hot & cold connections with adaptable 3/4” fitting is a key way forward for the installer. Key to ensuring the cylinder works and performs to its optimal ability is the sensor pockets, these determine how the unit calls for heat from the external source. The Cyclone has 10mm solar sensor pockets ensuring the probets from the solar fit correctly and effectively, we also ensured the aquastat pocket is produce to flair out holding the stat firmly in place Coils With the continued introduction of heat sources Joule has looked closely at the best possible option for coils within the Cyclone Range, we use both conventional rigid plain tube and CSST high effiency coil to ensure all our units perform to the highest possible standards, this flexibility ensures Joule can produce any heat surface area required. JOULE PL +48 (0) 128811171 3 Standard Baths Commercial Selection Sizing Guide Sensor Pockets T 2 Standard Baths F +48 (0) 814709046 These recommendations are based on the guidelines in BS 6700. Guidance should be sought for unusual applications, e.g. high flow rate showers, large baths, etc. Typical Commercial Application Large House Indirect Units 6 Bed / 4 Bathrooms 400 Guest House 8 Bed / 4 Bathrooms 2 x 300 Small Hotel 8 Bed / 8 Bathrooms 3 x 200 Sports Pavilion 25 People / 4 Showers 2 x 300 Sports Pavilion 25 People / 6 Showers 3 x 200 Students House 25 People / 3 Bathrooms 3 x 300 Old People’s Home 60 People / 10 Showers 5 x 300 (each supplying 2 bathrooms) Selecting the correct size of cylinder requires consideration of a nuber of variables, including the volume of water needed, the energy source and the space available. Calculating the colume needed can be achieved by adding together the individual volumes of each appliance that uses hot water and how frequently it is used. The energy source is the next variable to consider, as it will have a direct impact on the cylinder size. E biuro@joule-pl.pl W www.joule-pl.pl Direct efficient electrically heated hot water 1” Adaptable Hot Water Draw 1/2” T&P Relief Valve (fitted) 3/4” Secondary Return Immersion Heater 1” Adaptable Cold Water Inlet Cyclone Direct These cylinders are designed to work with electricity only. The water is heated using electrical elements and they do not have any ability to heated by oil or gas boilers. Immersion Heater Technical Information 5 / 20 PSM11150/D PSM11155/D PSM11160/D PSM13660/D PSM15660/D PSM15771/D PSM19071/D Volume (l) 125 150 200 250 300 400 500 Height (mm) 1110 1110 1110 1360 1560 1570 1900 Diameter (mm) 500 550 600 600 600 710 710 Weight Empty (kg) 28 32 36 45 49 64 77 Insulation (mm) 50 50 40 40 40 50 50 Reheat Time of 3/4 Cold Water Reheat Time of 3/4 Cold Water (3 kW Immersion) EN12897 Heat Exchange kW Dedicated Solar Volume Standard Standing Loss kWh/Day 1 Temperature and Pressure Relief Valve T - - - - - - - 48 63 91 118 141 175 222 - - - - - - - - - - - - - - 1.23 1.41 1.8 2.15 2.28 2.41 2.54 3 kW Incoloy Immersion 6 kW Incoloy Immersion 9 kW Incoloy Immersion • Intermittent Use • Soft Water • Intermittent Use • Quick Recovery • Soft Water • Intermittent Use • Quicker Recovery • Soft Water 3 kW Titanium Immersion 6 kW Titanium Immersion 9 kW Titanium Immersion • High Use • Hard Water • High Use • Quick Recovery • Hard Water • High Use • Quicker Recovery • Hard Water 0 Expansion Vessel JOULE PL +48 (0) 128811171 0 0 High Flow Rate Inlet Control Set Dual Thermostat F +48 (0) 814709046 2 0 Incoloy Long 240V 3kW Immersion Heater 15/22 Tundish E 0 0 22mm Thermostatic Mixing Valve biuro@joule-pl.pl W Expansion Vessel Hose www.joule-pl.pl 0 22 mm 2 Port Motorzed Diverting Valve Indirect efficient indirectly heated hot water 1” Adaptable Hot Water Draw 1/2” T&P Relief Valve (fitted) 3/4” Secondary Return 3/4” Boiler Return Plain Aquastat Pocket 3/4” Boiler Return 1” Adaptable Cold Water Inlet Indirect These cylinders are designed to be heated indrectly using of an oil or gas boiler. They come complete with one electric Element to intermittently support the water heating system. Immersion Heater Technical Information 7 / 20 PSM11150 PSM11155 PSM11160 PSM13660 PSM15660 PSM15771 PSM19071 Volume (l) 125 150 200 250 300 400 500 Height (mm) 1110 1110 1110 1360 1560 1570 1900 Diameter (mm) 500 550 600 600 600 710 710 Weight Empty (kg) 32 36 42 51 55 73 88 Insulation (mm) 50 50 40 40 40 50 50 Reheat Time of 3/4 Cold Water 19 21 26 26 32 35 35 Reheat Time of 3/4 Cold Water (3 kW Immersion) 48 63 91 118 141 175 222 EN12897 Prim. Heat Exchng (kW) 16 16 18 22 22 28 35 - - - - - - - Coil Surface (m2) 0.58 0.58 0.7 0.7 1.2 1.3 1.4 Standard Standing Loss (kWh/Day) 1.23 1.41 1.8 2.15 2.28 2.41 2.54 EN12897 Solar Heat Exchng (kW) 1 Temperature and Pressure Relief Valve T 0 Expansion Vessel JOULE PL +48 (0) 128811171 0 0 High Flow Rate Inlet Control Set Dual Thermostat F +48 (0) 814709046 1 0 Incoloy Long 240V 3kW Immersion Heater 15/22 Tundish E 0 0 22mm Thermostatic Mixing Valve biuro@joule-pl.pl W Expansion Vessel Hose www.joule-pl.pl 0 22 mm 2 Port Motorzed Diverting Valve Twin Coil efficient solar supported indirectly heated hot water 1” Adaptable Hot Water Draw 1/2” T&P Relief Valve (fitted) Plain Solar Sensor 3/4” Boiler Flow 3/4” Secondary Return Plain Aquastat Pocket 3/4” Boiler Return Immersion Heater 3/4” Solar Flow Plain Aquastat Pocket Plain Solar Sensor 1” Adaptable Cold Water Inlet 3/4” Solar Return Twin Coil These cylinders are designed to be heated indrectly using of an oil or gas boiler. They come complete with one electric Element to intermittently support the water heating system. Eco80 With the requirement for more energy efficient solutions, Joule offer the full Cyclone range with Eco80 specification. The eco 80 range increasea insulation thickness to 80mm nominal. Technical Information 9 / 20 PSM11160/S PSM13660/S PSM15660/S PSM15771/S PSM19071/S Volume (l) 200 250 300 400 500 Height (mm) 1110 1360 1560 1570 1900 Diameter (mm) 600 600 600 710 710 Weight Empty (kg) 45 55 60 76 89 Weight Full (kg) 245 245 360 476 589 Insulation (mm) 40 40 40 50 50 Reheat Time of 3/4 Cold Water 26 26 32 35 35 Reheat Time of 3/4 Cold Water (3 kW Immersion) 91 118 141 175 222 EN12897 Prim. Heat Exchng (kW) 18 22 22 28 35 EN12897 Solar Heat Exchng (kW) 16 18 18 22 22 Dedicated Solar Volume (l) 110 135 160 210 260 Solar Coil Surface (m ) 0.7 0.7 1.2 1.3 1.4 Primary Coil Surface (m2) 0.58 0.77 0.8 1.02 1.28 Standard Standing Loss (kWh/Day) 1.8 2.15 2.28 2.41 2.54 Eco80 Standing Loss (kWh/Day) 1.59 1.69 1.91 2.15 2.25 2 When using Eco80, dimensions will change to allow for extra insulation. 1 Temperature and Pressure Relief Valve T 0 Expansion Vessel JOULE PL +48 (0) 128811171 0 0 High Flow Rate Inlet Control Set Dual Thermostat F +48 (0) 814709046 1 0 Incoloy Long 240V 3kW Immersion Heater 15/22 Tundish E 0 0 22mm Thermostatic Mixing Valve biuro@joule-pl.pl W Expansion Vessel Hose www.joule-pl.pl 0 22 mm 2 Port Motorzed Diverting Valve Triple Coil efficient solar supported indirectly heated hot water complete with auxiliary heating coil 1” Adaptable Hot Water Draw Plain Solar Sensor T&P Relief Valve (fitted) 3/4” Boiler Flow 1” Boiler Flow Plain Aquastat Pocket 1” Boiler Return 3/4” Secondary Return 3/4” Boiler Return Immersion Heater 3/4” Solar Flow Plain Aquastat Pocket Plain Solar Sensor 3/4” Solar Return Triple Coil Joule Cyclone triple coil cylinders have been designed specifically with multi fuel applications in mind. Featuring a purpose designed solar coil, which allows maximum heat transfer of solar energy into the stored water and a 28mm (1”) gravity coil which facilitates the use of gravity fed solid fuel systems. The cylinders are suitable for use with a wide range of solar systems now available and are 1” Adaptable Cold Water Inlet an efficient and environmentally friendly way of providing domestic hot water. Combine this with the use of excess heat from your solid fuel system during winter, this cylinder allows you to optimise the use of heat during both summer and winter. Cyclone triple coil cylinders also offer the benefit of mains pressure hot water - powerful showers and fast filling baths. Technical Information 11 / 20 PSM11160/3 PSM13660/3 PSM15660/3 PSM15771/3 PSM19071/3 Volume (l) 200 250 300 400 500 Height (mm) 1110 1360 1560 1570 1900 Diameter (mm) 600 600 600 710 710 Weight Empty (kg) 50 59 67 83 96 Insulation (mm) 40 40 40 50 50 Weight Full (kg) 250 309 363 480 594 Reheat Time of 3/4 Cold Water 26 26 32 35 35 Solar Coil Surface (m ) 0.7 0.7 1.2 1.3 1.4 2 Primary Coil Surface (m ) 0.58 0.77 0.8 1.02 1.28 Secondary Coil Surface (m2) 0.58 0.58 0.58 0.58 0.58 Dedicated Solar Volume (l) 110 135 160 210 260 Standard Standing Loss (kWh/Day) 1.8 2.15 2.28 2.41 2.54 2 1 Temperature and Pressure Relief Valve T 0 Expansion Vessel JOULE PL +48 (0) 128811171 0 0 High Flow Rate Inlet Control Set Dual Thermostat F +48 (0) 814709046 1 0 Incoloy Long 240V 3kW Immersion Heater 15/22 Tundish E 0 0 22mm Thermostatic Mixing Valve biuro@joule-pl.pl W Expansion Vessel Hose www.joule-pl.pl 0 22 mm 2 Port Motorzed Diverting Valve Thermal Store incorporating mains pressure (boosted) domestic hot water Hot Water Draw Aquastat Pocket 1” Connection 1” Connection 1” Connection 1” Connection Aquastat Pocket Link 1” 1” Connection 1” Connection Immersion Heater Aquastat Pocket Link 1” Solar 3/4” Flow Solar Sensor Aquastat Pocket 1” Connection DHW 1” Flow Triple Coil The Joule Copper and Stainless Steel Thermal Stores are the next generation of heating and hot water production. The Joule thermal store has been designed with multi fuel heating systems in mind. The cylinder allows an easy installation of solid fuel, solar and boiler easily and effectively. The thermal store allows pressurised hot water heated from solid fuel safely and fully compliant with current plumbing practices Solar 3/4” Return 1” Connection and standards. The tank operates like a hot water cylinder in reverse. The tank is completely full of heating system water, the domestic hot water flows through a network of coils up through the centre of the tank supplying you with high flow rate pressurised hot water at piping hot temperatures. The thermal store is ideally suited to providing solar heat support and domestic hot water production simultaneously and easily. Technical Information 13 / 20 TSS-250/S TSS-300/S TSS-400/S TSS-500/S Volume (l) 250 300 400 500 Height (mm) 1360 1560 1570 1900 Diameter (mm) 600 600 710 710 Weight Empty (kg) 55 60 76 89 Insulation (mm) 50 50 50 50 187.5 225 300 375 1st Hour Hot Water (l/h) 50 °C Max Flow Rate (l/min) 50 °C 17 20 22 24 Dedicated Solar Volume (l) 135 160 210 260 Standing Loss Cylinder (kWh/Day) 1.9 2.0 2.41 2.54 Solar Coil Surface (m ) 1.15 1.15 1.2 1.3 Primary Coil Surface (m2) 2.30 2.30 2.30 3.45 2 1 Temperature and Pressure Relief Valve T 0 Expansion Vessel JOULE PL +48 (0) 128811171 0 0 High Flow Rate Inlet Control Set Dual Thermostat F +48 (0) 814709046 1 0 Incoloy Long 240V 3kW Immersion Heater 15/22 Tundish E 0 0 22mm Thermostatic Mixing Valve biuro@joule-pl.pl W Expansion Vessel Hose www.joule-pl.pl 0 22 mm 2 Port Motorzed Diverting Valve Heat Pump specifically designed to work with heat pumps and other low temperature heat sources 1” Adaptable Hot Water Draw Plain Solar Sensor Plain Solar Sensor 1/2” T&P Relief Valve (fitted) 1” Heat Pump Flow 3/4” Secondary Return Plain Solar Sensor 1” Heat Pump Return Plain Aquastat Pocket Immersion Heater 3/4” Solar Flow Plain Solar Sensor 3/4” Solar Return 1” Adaptable Cold Water Inlet Heat Pump Cylinders Joule Cyclone Heatpump cylinders have been designed to work with air source, ground source and other types of low temperature heat source appliances. The cylinder is manufactured with coil in coil technology. Coil in coil technology allows for greater surface area coils to be installed in standard sized cylinder units. The inner coil dissipates more heat at lower temperatures improving the efficiency of the overall system. the cylinders can be manufactured with any size coil required. Please call Joule for details of coil sizes of units on the shelf and feel free to ask Joule for a different specification cylinder if that is what you require. Our in house engineers are on hand to offer advice on cylinder specifications for different applications. Technical Information 15 / 20 Heat Pump Cylinder with 1 coil Volume (l) 200 250 300 400 500 PSM14053/HG PSM17753/HG PSM15660/HG PSM15771/HG PSM19071/HG Height (mm) 1400 1775 1560 1570 1900 Diameter (mm) 530 530 600 710 710 Primary Coil Surface (m2) 2.5 2.8 3.2 3.2 4 Insulation (mm) 40 40 40 50 50 Weight Empty (kg) 65 72 80 97 109 Standard Standing Loss (kWh/Day) 1.8 2.15 2.28 2.41 2.54 Heat Pump Cylinder with 2 coils PSM14053/HG+S PSM17753/HG+S PSM15660/HG+S PSM15771/HG+S PSM19071/HG+S Height (mm) 1400 1775 1560 1570 1900 Diameter (mm) 530 530 600 710 710 Primary Coil Surface (m ) 2.5 2.8 3.2 3.2 4 Solar Coil Surface (m2) 1.1 1.2 1.2 1.3 1.4 Insulation (mm) 40 40 40 50 50 2 Weight Empty (kg) 69 76 84 101 114 Standard Standing Loss (kWh/Day) 1.8 2.15 2.28 2.41 2.54 1 Temperature and Pressure Relief Valve T 0 Expansion Vessel JOULE PL +48 (0) 128811171 0 0 High Flow Rate Inlet Control Set Dual Thermostat F +48 (0) 814709046 1 0 Incoloy Long 240V 3kW Immersion Heater 15/22 Tundish E 0 0 22mm Thermostatic Mixing Valve biuro@joule-pl.pl W Expansion Vessel Hose www.joule-pl.pl 0 22 mm 2 Port Motorzed Diverting Valve Tank in Tank Eco fast recovery tank-in-tank cylinder - perfect partner to condensing boiler Secondary Return Cold Water Supply Hor Water Supply T/P Relief Valve 1” Connection 1” Connection 1” Connection 1” Connection 1” Connection 1” Connection DHW Tank 3/4” Solar Flow 1” Connection 1” Connection 3/4” Solar Return Tank in Tank Eco The fastest recovery hot water cylinder available • 20 min recovery of Domestic Hot Water • Suitable for Heat Pumps because of large Surface Area • Suitable for Solar Thermal • Suitable for pellet or log burners • Design reduces boiler cycling & improves boiler efficiency • Most advanced Domestic Hot Water storage cylinder available • Tank design reduces limescale buildup Technical Information 17 / 20 STANDARD Volume (l) 150 200 250 300 400 500 Height (mm) 1085 1085 1335 1535 1535 1880 Diameter (mm) 500 560 560 560 660 660 Weight Empty (kg) 30 34 43 47 62 75 Weight Full (kg) 180 234 293 347 462 575 Reheat Indirect Total Minutes 21 26 26 32 35 35 Reheat 3 kW Immersion Total Min. 63 91 118 141 175 222 - - - - - - Standard Standing Loss kWh/Day 1.45 1.84 2.19 2.32 2.45 2.58 Eco80 Standing Loss kWh/Day 1.39 1.63 1.73 1.95 2.19 2.29 Litres in first 30 min 40 °C 320 321 418 558 686 922 Litres in first 30 min 45 °C 263 275 348 464 582 790 Litres in first 30 min 60 °C 175 161 206 274 358 504 Litres in first hour 40 °C 938 1063 1225 1633 1872 2666 Litres in first hour 45 °C 751 911 1003 1338 1559 2285 Dedicated Solar Volume Litres in first hour 60 °C 426 536 590 786 935 1368 Continuous Flow (l/h) 827 890 967 1289 1423 2093 Continuous Flow (l/h) 673 763 786 1048 1172 1794 Continuous Flow (l/h) 378 450 461 614 693 1037 Absorbed Power (kW) 29 31 32 43 48 73 1 Temperature and Pressure Relief Valve T 1 Expansion Vessel JOULE PL +48 (0) 128811171 1 1 High Flow Rate Inlet Control Set Dual Thermostat F +48 (0) 814709046 1 1 Incoloy Long 240V 3kW Immersion Heater 15/22 Tundish E 0 1 22mm Thermostatic Mixing Valve biuro@joule-pl.pl W Expansion Vessel Hose www.joule-pl.pl 1 22 mm 2 Port Motorzed Diverting Valve Stainless Hot Water Calorifier Large Stainless Steel Hot Water Calorifier Joule manufactures stainless steel cylinders in all capacities up to 3,000L. Choosing stainless steel over mild steel for hot water storage is a sensible option as it removes the need for a sacrificial anode and maintenance of that part. The quality of the cylinders is ensured with factory testing to 12 bar. Stainless steel construction offers numerous advantages over mild steel • • • • • • • • • • Better corrosion resistance properties Coil type heat exchangers Removable U type heat exchangers Option for inspection hatch Soft foam jacket insulation option Dense PU foam and wipe clean outer casing option Horizontal or vertical standing Connections available for use with plate heat exchangers Stainless Steel grade used 316L Option for cylinder to be manufactured to customers’ requirements Technical Information 19 / 20 LARGE STAINLESS STEEL HOT WATER CLARIFIERS Volume (l) 600 750 1000 1250 1500 2000 Height (mm) 2100 2100 2100 2100 2400 2700 2700 2700 Diameter (mm) 610 750 900 945 945 1100 1200 1270 Weight Empty (kg) 110 132 155 Weight Full (kg) 710 882 1155 2500 3000 Working Pressure (bar) 6-8 6-8 6-8 6-8 6-8 6-8 6-8 6-8 Tested Pressure (bar) 9-12 9-12 9-12 9-12 9-12 9-12 9-12 9-12 • Dense foam insulation and outer casing only available up to 945mm shell diameter. Bigger than this requires soft foam jacket (100mm) • Dimensions indicated (height & diameter) are un-insulated shell dimensions and insulation thickness must be added to get overall dimensions ELECTRICAL HEATING OPTIONS Lenght (mm) Phase Thread Connection (“) Material 6 kW 457 Single Phase 2.25” BSP Incloy 825 9 kW 457 Single Phase 2.25” BSP Incloy 825 90 12 kW 406 Three Phase 2.25” BSP Incloy 825 73 18 kW 610 Three Phase 2.25” BSP Incloy 825 71 INSPECTION HATCHES Connection Type Watt Density per (inch2) INSULATION OPTIONS Material 200mm Diameter Flange Stainless Steel Soft Foam Jacket 300mm Diameter Flange Stainless Steel Dense PU Foam 400mm Diameter Flange Stainless Steel Thickness Type 100 mm Removable Jacket 50 mm Not Removable COILS & HEAT EXCHANGERS Internal Coil Diameter (mm) Recovery Time (mins) Working Pressure (bar) Notes 22 / 28 / 32 / 38 30 / 40 / 60 / 90 / 120 6-8 Internal, not removable 25-50 30 / 40 / 60 / 90 / 120 6-8 Fully removable U Type • Primary connections can be selected from available options • Other coil and u type heat exchanger specifications available on request 0 Temperature and Pressure Relief Valve T 0 Expansion Vessel JOULE PL +48 (0) 128811171 0 0 High Flow Rate Inlet Control Set Dual Thermostat F +48 (0) 814709046 0 0 Incoloy Long 240V 3kW Immersion Heater 15/22 Tundish E 0 0 22mm Thermostatic Mixing Valve biuro@joule-pl.pl W Expansion Vessel Hose www.joule-pl.pl 0 22 mm 2 Port Motorzed Diverting Valve Stainless Steel Buffer Storage Stainless Steel Buffer Storage Joule manufactures a large range of stainless buffer tanks with different coil configurations. The largest capacity stainless steel buffer tank is 3,000L. Buffer tanks can come complete with numerous coil configurations from direct to quad coil and all in-between. The coil types available are pumped high temperature, heat pump, gravity and solar. The advantages of choosing a Joule stainless steel buffer storage tank are, • • • • • Light weight compared with mild steel BSP direct connections BSP coil connections Standard immersions available on request. Eco 80 specification available (80mm insulation) Examples of Use • With air and ground source heat pumps • For helping solar to heat support both heating and hot water system • For use with bio mass and solid fuel heating systems • As a heat store for electrically generated energy Technical Information 21 / 20 LARGE STAINLESS STEEL BUFFER STORAGE TANKS Volume (l) 125 150 170 200 250 300 400 500 600 Height (mm) 925 1085 1205 1085 1335 1335 1535 1880 2280 Diameter (mm) 550 550 550 600 600 600 710 710 710 Weight Empty (kg) 26 30 32 34 43 47 62 75 90 Weight Full (kg) 151 180 202 234 293 347 462 575 690 No. Direct Connections 7 7 7 9 9 9 9 9 9 Diameter of Direct Connections 1” 1” 1” 1” 1” 1” 1” 1” 1” Drain Off 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” Standard Standing Loss (kWh/Day) 1.23 1.41 1.53 1.8 2.15 2.28 2.41 2.54 2.71 Eco80 Standing Loss (kWh/Day) 1.16 1.36 1.44 1.69 1.91 2.15 2.25 2.38 2.59 ELECTRICAL HEATING OPTIONS Lenght (mm) Phase Thread Connection (“) Material 6 kW 457 Single Phase 2.25” BSP Incloy 825 9 kW 457 Single Phase 2.25” BSP Incloy 825 90 12 kW 406 Three Phase 2.25” BSP Incloy 825 73 18 kW 610 Three Phase 2.25” BSP Incloy 825 71 0 Temperature and Pressure Relief Valve T 0 Expansion Vessel JOULE PL +48 (0) 128811171 0 0 High Flow Rate Inlet Control Set Dual Thermostat F +48 (0) 814709046 0 0 Incoloy Long 240V 3kW Immersion Heater 15/22 Tundish E 0 0 22mm Thermostatic Mixing Valve biuro@joule-pl.pl Watt Density per (inch2) W Expansion Vessel Hose www.joule-pl.pl 0 22 mm 2 Port Motorzed Diverting Valve Mild Steel Hot Water Calorifier Large Mild Steel Buffer Storage These hot water tanks must be installed in a frostprotected room by a locally authorised specialist company. The vacuum enamelled tanks are suitable for normal drinking water. An appropriate electrical separation in accordance with the standards of engineering must be provided for mixed installations. Any unused coupling sleeves must be suitably sealed. Please observe the regulations of the local works and the relevant standards when connecting. The connections must be installed pressure-proof. The component-tested safety devices must be installed in the cold water supply line according to local regulations, as can be seen in the illustration. The component-tested safety valve must have a connecting diameter of DN 15 (up to 200 l, max. heating capacity 75kW) or DN 20 (over 200 l, max. heating capacity 150 kW) and must not be closable from the hot water tank. An indicating label with the following inscription must be affixed to the safety valve or its blow-off line: For safety reasons, water may exit from the blow-off line during heating! Do not close! The operating overpressure specified on the rating plate must not be exceeded; install pressure reducer, if necessary. A discharging device must be provided in the cold water when installing the connection. Technical Information Dimension Type 23 / 20 1500 2000 2500 3000 FFM / FRM / FRMR FFM / FRM / FRMR FFM / FRM / FRMR FFM / FRM / FRMR Ø of tank with ISO 100 mm 1200 1300 1400 1400 Height with ISO 100 mm 2230 2420 2480 2870 Ø of tank without ISO 100 mm 1000 1100 1200 1200 HW/ventilation A 5/4” FT 2122 2313 2373 2768 Hot water B 5/4” FT 1825 1997 2027 2422 Circulation C 1” FT 1217 1252 1282 1682 Heating inflow, bottom D 5/4” FT 1067 1088 1122 1262 Heating return flow, bottom E 5/4” FT 362 448 482 482 Heating inflow, top O 5/4” FT 1722 1713 1927 2272 Heating return flow, bottom P 5/4” FT 1342 1393 1597 1942 CW / Discharge F 5/4” FT 80 168 80 100 Sensor G 1/2” FT 1825 1997 2027 2422 Correx anode H 3/4” FT 1494 1612 1642 1992 Electric heating element I 2” FT 1354 1472 1502 1852 Sensor K 1/2” FT 1167 1202 1232 1482 Flange L D = 240 837 847 877 877 Flange L D = 240 437 447 477 477 Heat exchanger M HE m2/l 3.5 / 29 4.0 / 36 4.0 / 40 5.0 / 47 Heat exchanger N HE m2/l 1.75 / 15 2.0 / 16 2.0 / 18 2.5 / 25 Weight (kg) 360 / 425 / 460 420 / 493 / 532 495 / 570 / 610 620 / 713 / 762 Tilted weight 2250 2440 2520 2890 Operating pressure (bar) 10 10 10 10 Operating temperature (°C) 95 95 95 95 0 Temperature and Pressure Relief Valve T 0 Expansion Vessel JOULE PL +48 (0) 128811171 0 0 High Flow Rate Inlet Control Set Dual Thermostat F +48 (0) 814709046 0 0 Incoloy Long 240V 3kW Immersion Heater 15/22 Tundish E 0 0 22mm Thermostatic Mixing Valve biuro@joule-pl.pl W Expansion Vessel Hose www.joule-pl.pl 0 22 mm 2 Port Motorzed Diverting Valve Mild Steel Buffer Storage new Eco Sk in 36% Energy instead Saving if 21% New Decisive Advantages • Everything from one source – Buffer tank and insulation are manufactured by Joule • Perfect corrosion protection – buffer tank with stoveenamelled powder coating externally • Stable, form-retaining polystyrene cover • Perfect fit, therefore no chimney losses • Insulated connection caps for the connections • With ECO SKIN 2.0 save up to 3050,- on energy costs, over the life of a 1000 l - storage tank Large Mild Steel Buffer Storage Joule mild steel buffer tanks are suitable for all hot water central heating systems, regardless of whether they are powered by solid-fuel or oil-fired boilers, heat pumps, solar energy systems or continuous flow heaters (gas or electric). Several buffer tanks can also be combined in a row (see technical data and accessories), meaning the tank volume can be adjusted individually depending on the requirements. Furthermore, the buffer tanks can also be used for cold water storage in cooling processes (up to 3 bar operating / system pressure) or heat recovery in industrial facilities. • Nominal capacity of PSF/PSM/PSR/PSRR = 500 to 5000 litres • Made from quality St 37-2 steel • 100 mm ECO SKIN fleece insulation (up to 5,000 l) • Large-surface pipe array on PSR/PSRR models • 240 mm flange on PSF models for installing a finned tube heta exchanger or built-in heater • Operating pressure = 3 bar, test pressure 4.5 bar in buffer tank • Operating pressure max. 10 bar, test pressure 15 bar in pipe array on PSR/PSRR models • 4 regulating sleeve threads. „Female thread on PSF/PSM and PSR/PSRR models • 2 x sensor channels for variable positioning of sensor models • Operating temperature = 95°C (110°C in pipe array) • External powder coating (colour deviations) up to 2000 litres • External anti-rust coating (from 3,000 l upwards) Technical Information Type Diagonal Height (mm) 200 1105 670 300 1370 670 25 / 20 Dimensions (mm) A B C D F G H Pipe array heating surface (mm) I J K L M Lower Upper Array content (l) Lower Upper 500 1670 220 620 1010 1390 1640 650 340 495 1725 220 1040 350 1.8 1.2 11 7.5 800 1750 260 630 1030 1430 1700 790 390 585 1785 260 1070 360 2.4 1.8 15 11 825 1900 260 685 1140 1595 1857 790 − − − − − 15 1000 2090 310 745 1250 1710 2050 790 390 1250 2100 330 705 1105 1480 1802 1000 − 1500 2270 380 825 1350 1760 2150 1000 415 − 1940 − − − 720 2135 310 1160 540 − 1905 − − − 800 2235 375 1260 500 3 2.4 19 − − − − 3.6 2.4 22 15 2000 2460 320 900 1490 2020 2380 1100 423 800 2465 320 1420 540 4.2 2.8 26 18 3000 2650 375 985 1600 2205 2596 1250 460 720 2681 375 1665 540 4.5 3.0 29 19 4000 2740 405 1022 1639 2255 2669 1400 490 720 2754 405 1715 540 5.0 3.6 32 22 5000 2893 455 1065 1680 2285 2770 1600 540 720 2855 405 1745 540 6.0 4.2 39 26 Standby Energy Comsumption (kWh/24h) Type 200 300 500 800 825 1000 1250 1500 2000 3000 4000 5000 PSF 2.9 3.1 3.3 4.1 4.2 4.3 5.1 5.4 6.3 7.7 8.7 10.0 PSM 2.7 2.9 3.0 3.7 3.8 3.9 4.7 5.0 5.9 7.3 8.3 9.6 PSR 2.8 2.9 3.1 3.9 4.0 4.1 4.9 5.2 6.1 7.5 8.5 9.8 PSRR 2.9 3.1 3.3 4.0 4.1 4.2 5.0 5.3 6.2 7.6 8.6 9.9 Standby Energy Consumption in kWh/24h according to EN 12897 PSF PSM Buffer Tank with D240 Flange 0 Temperature and Pressure Relief Valve T PSM Buffer Tank with 6/4” Cooling Sleeves 0 Expansion Vessel JOULE PL +48 (0) 128811171 0 0 High Flow Rate Inlet Control Set Dual Thermostat F +48 (0) 814709046 0 PSR / PSRR Buffer Tank (PSM with Pipe Array) 0 Incoloy Long 240V 3kW Immersion Heater 15/22 Tundish E 0 0 22mm Thermostatic Mixing Valve biuro@joule-pl.pl W Expansion Vessel Hose www.joule-pl.pl 0 22 mm 2 Port Motorzed Diverting Valve Notes 27 / 20 T JOULE PL +48 (0) 128811171 F +48 (0) 814709046 E biuro@joule-pl.pl W www.joule-pl.pl Unvented stainless cylinders JOULE PL mail tel fax eml web 23-200 Kraśnik, ul. Towarowa 34. +48 (0) 128811171 +48 (0) 814709046 biuro@joule-pl.pl www.joule-pl.pl mail tel fax eml web JOULE UK JOULE IE Unit 17C&D Power Road, Plantation Bus. Pk. mail Bromborough, Wirral, CH62 3RN tel +44 (0) 1513 551 094 fax +44 (0) 1513 568 336 eml info@jouleuk.co.uk web www.jouleuk.co.uk Kylemore Park West, Ballyfermot, Dublin 10 +353 (1) 623 7080 +353 (1) 626 9337 info@joule.ie www.joule.ie