MAKING MODERN LIVING POSSIBLE
Technical brochure
NTC type temperature sensors
for ETC & ERC controllers
Danfoss has selected a programme of temperature sensors to be used with their ETC and
ERC range of controllers.
NTC (Negative Temperature Coefficient)
temperature sensors change resistance with
temperature in a manner compatible with the
controller software.
They are fully compliant with the tolerance
requirements according to IEC 60060-1.
Features
ƒƒ High accuracy in temperature measurement and close tolerances ensure improved control
ƒƒ Plastic moulded sensor case
ƒƒ Insulated connecting cable
ƒƒ Various cable lenghts available
ƒƒ Supplied with rast 2.5 connectors
ƒƒ Poka-yoke (mistake-proof ) cable connection
to the controller
Danfoss A/S (AC-SMC /bpv), 06 - 2011
DKRCC.PD.S00.A1.02 / 520H5357
1
Technical brochure
Temperature sensors type NTC for ETC controllers
Connectors diagram
Danfoss NTC temperature sensors are clearly
marked for easy identification during the assembly process.
For example, a sensor marked with two blue
stripes as shown in figure 1 is the evaporator or
defrost sensor.
Colour coding on the cable close to the sensor
element is used to differentiate between cabinet,
evaporator (defrost) and condenser sensors even
if the plug part of the cable is not visible.
There are also different connector types or codes
at the plug end of the cable. Using a combination of rib cuts on the connectors ensures correct
connection position to the controller as shown in
figure 2. This is known as Poka-Yoke design.
ERC controller
Sensor colour
coding
Figure 1
ETC controller
Poka-yoke (mistake-proof) cable
connection to the controller
Figure 2
2
DKRCC.PD.S00.A1.02 / 520H5357
Danfoss A/S (AC-SMC /bpv), 06 - 2011
Temperature sensors type NTC for ETC controllers
Technical data
PVC Standard sensors
Operating temperature range
Thermistor
Connecting cable
Climatic category (IEC 60068-1)
Rated resistance at 0° C
Rated resistance at 25° C
Insulation resistance
Voltage proof
Thermal time constant
Typical applications
-40 to 80°C
Encapsulated in plastic housing
PVC double insulated
40/80/56
16330 Ω ±2% (±0.4° C)
5000 Ω
>1000 MΩ
3750 V
Approx. 35 sec.
Air sensing, evaporator sensing, condenser sensing
TPE precision sensors
Operating temperature range
Thermistor
Connecting cable
Climatic category (IEC 60068-1)
-20 to 100°C
Encapsulated in plastic housing
Thermoplastic elastomer double insulated
40/80/56
Double insulated
Double insulated
Technical brochure
Rated resistance at 0° C
Rated resistance at 25° C
Insulation resistance
Voltage proof
Thermal time constant
Typical application
Basic insulated
TPFE low temperature sensors
Operating temperature range
Thermistor
Connecting cable
Climatic category (IEC 60068-1)
Danfoss A/S (AC-SMC /bpv), 06 - 2011
16330 Ω ±1% (±0.2° C)
5000 Ω
>100 MΩ
3750 V
Approx. 8 sec.
Ice bank
-65 to 200°C
Encapsulated in plastic housing
Teflon single insulated
40/80/56
Rated resistance at 0° C
6 kΩ ±1% (±0.2° C)
Insulation resistance
>100 MΩ
1250 V
Approx. 7 sec.
Low temperature freezers
Voltage proof
Thermal time constant
Typical application
DKRCC.PD.S00.A1.02 / 520H5357
3
Technical brochure
Ordering
Temperature sensors type NTC for ETC controllers
Sensor type
PVC
standard
Length
470
1000
1500
2000
2500
3000
470
1000
1500
2000
2500
3000
470
1000
1500
2000
2500
3000
Connector
C1
C1
C1
C1
C1
C1
C2
C2
C2
C2
C2
C2
C3
C3
C3
C3
C3
C3
Colour marking
1000
2000
C1
C1
077F8657
077F8665
470
1000
1500
2000
2500
3000
C1
C1
C1
C1
C1
C1
077F8724
077F8725
077F8726
077F8727
077F8728
077F8729
||
||
||
||
||
||
|
|
|
|
|
|
Code number
077F8751
077F8757
077F8761
077F8765
077F8767
077F8769
077F8780
077F8786
077F8790
077F8794
N/A
077F8798
077F8750
077F8756
077F8760
077F8764
077F8766
077F8768
TPFE
low temperature
TPE
precision
Dimensions and weights
US units
SI units
US units
TPE
precision
TPFE
low temperature sensor
PVC
standard sensor
SI units
4
DKRCC.PD.S00.A1.02 / 520H5357
Danfoss A/S (AC-SMC /bpv), 06 - 2011