Power Capabilities
Handling, Feeding, Weighing & Process Enhancement Technologies
General Handling & Weighing
Road Intake
All Power Station bulk materials
IntraBulk above ground system
Extensive range of mechanical
Feed from road vehicle or front end
handling & weighing technologies
loader
Mild steel & stainless steel
Fast vehicle turn around time
construction
Can act as buffer store.
Dust tight & weatherproof
Controlled discharge into process.
Wear & corrosion resistant designs
High temperature/pressure tight
construction available
Screens
Container & Trailer Intake
Suitable for coal, lime & ash
FuelMaster discharge stations
Wide range of screen decks
Tilting station for containers
RotaClass screens for circular motion
Docking stations for trailers with
LinaClass screens for linear motion
walking floor
Screening rates up to 2,500 tonnes/hr
Standard containers 30-40m3
Trailers 90m3
Covered Storage
Biomass Handling/Storage
MaxiStore bridge distribution system.
All types of handling systems
Used within new or existing facility.
available
Redler en-masse conveying principle
Loading & unloading for storage
Even distribution through the store.
systems
Maximises storage capacity.
Ancillary equipment – screens,
weighers, metal separation
Accurate feed systems into process.
Power Capabilities
Bulk Materials Handling
Feeding
Weighing
Process Equipment
Valves & Gates
Precipitator Control Enhancement
Fly Ash Handling
Gravimetric Feeders
MoveMaster conveying & elevating
To pulverising mills or fluid bed
range
combustors
Low power consumption
Explosion pressure to 3.5 bar g
Dust-tight construction
Length & sizes to suit application
Located beneath precipitators &
Capacities up to 150 tonnes/hr
dust collectors
Microprocessor control linking to
Large capacity range
boiler DCS
Bottom Ash Handling
Volumetric Feeders
MoveMaster conveyors
Belt or chain type feeders
Wet or dry scraper chain principle
Explosion pressure containment
Serves wide variety of boilers
to 3.5 bar g.
Conveying to storage or outloading
Length & sizes to suit application
Wear and corrosion resistant designs
Compact designs for restricted areas.
Screening & crushing incorporated
Capacities up to 150 tonnes/hr
Ash Conveying
Lime Feeders
Long distance by pipe conveyor
MULTICOR & MULTIDOS type
Flexible layout
Compact design, dust tight
Fly ash & bottom ash
Feed rates up to 800m3/hr
Other materials - limestone
Accuracy + / - 0.5%
& biomass
Easy plant integration
Environmentally acceptable
Minimal wearing components
Stock Redler Limited
Redler House
Dudbridge, Stroud
Gloucestershire
GL5 3EY England
T +44 (0) 1453 763 611
F +44 (0) 1453 763 582
sales@redler.com
www.redler.com
Publication No. 29/01
Schenck Process GmbH
Pallaswiesenstraße 100
64293 Darmstadt
Germany
T +49 61 51-15 310
F +49 61 51-15 31 66
sales@schenckprocess.com
www.schenckprocess.com