POWER GENERATION
Power Generation and
Petroleum Industries
Brochure
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Morris Sallick Industrial Supplies, Inc.
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
BOILER BASED SYSTEMS
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
The McBurney Corporation is an engineering and Construction Company located in
metropolitan Atlanta, Georgia, USA. We have been in business since 1911. Our firm
specializes in Biomass fuelled steam and power systems for the Cogeneration, Utility,
Cane Sugar, Forest Products, and other manufacturing Industries. While McBurney is
a full service organization with engineering, project management, construction, maintenance and repair services; McBurney works with its clients and provides those
services which best complement the steam and power needs of that client for a
particular project. In addition to being an Engineer, Procure, Construct (EPC) firm, we
also perform Engineering Studies, Feasibility Studies and Efficiency Studies. Many of
these studies later result in full scope Engineer, Procure, and Construct contracts for
our clients.
Biomass Fuels Qualifications
Our Qualifications are based on successful experience designing, supplying and installing
unique systems for the combustion of difficult Biomass and Fossil fuels. Many of these fuels
are high in soluble alkalis and other problematic constituents. Our successful experience
dealing with these various fuels provides us with an unrivaled understanding and knowledge
from which we develop new systems. A partial listing of the fuels with which we have proven
successful experience includes:
Bagasse
Sludge
Coconut Shells
NRP
Rice Husks
Malt Sprouts
Chicken Litter
Coal
Barley Needles
Switch Grass
Municipal Refuse
Oil
Wheat Chaff
Wood Chips
TDF
Natural Gas
Oat Hulls
Bark
Heavy Hydrocarbon
Distillation Residues
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
FOSSIL
Fossil Power Systems Inc. (Fossil) is a Canadian company that has been supplying system hardware/software and services to international
customers for more than 25 years. By providing exceptional expertise and technical knowledge Fossil has become a trusted world class leader
in the supply of control solutions and instrumentation for electrical utilities, pulp and paper processing plants,
petro-chemical facilities, agricultural research facilities and food processing plants.
AQUARIAN SINGLE PROBE
AQUARIAN 3000Classic
AQUARIAN 3000Visual
VALVES
ALARM MODULE
AQUARIAN 1000Plus
AQUARIAN 3000Mini
RETROFIT CLARK RELIANCE
AQUARIAN 3000 VISUAL
PROBES
CCTC CAMERA
Morris Sallick Industrial Supplies, Inc.
Conamara Engineering
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
High efficiency burners to burn
one, two or three fuels at a time.
Coal / Coke feeders.
Expansion joints.
-
-
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
PREVENTION OF BOILER FOULING IS BETTER THAN CORRECTION
Agglomeration coats convective tubes and boiler surfaces causing:
• Increased heat rate (lower efficiency)
• Lowered steam temperature
• Choking off air supplies
• Higher forced outage rate from:
• Cyclone and/or Loop Seal pluggages
• Inability to remove bed material
Fouling occur due to the low boiling point of many components and impurities in the fuels being used many of which contain low boiling point phases
causing "sticky ash".
Up to now many of the solutions have been to clean fouling as it starts accumulating - this cleaning affects the performance of the boiler and it may not
fix the problem.
Aurora is a product that is added to the fuel, once at the boiler this product
preferentially captures harmful alkalis forming compounds with much
higher melting temperatures, which do not condense. These compounds do
not form agglomerates and are easily removed with the ash. Aurora is
typically added at a rate of between 0.5% to 2% of the fuel blend.
Boiler Tubes Before
After
Boiler Tubes Before
After
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
TURBINES
TurboCare
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
TurboCare is a leader in providing integrated aftermarket solutions, including repair services and replacement parts for
virtually all makes of turbomachinery, and specializes in the design, manufacture and application of engineered
component and repair upgrades.
G enerators
REPAIRS AND OVERHAULS
Gas Turbines
REPAIRS AND OVERHAULS
> Frame 3
> Frame 5
> Frame 6
> Frame 7EA/9EA
> Frame 7FA
> GT11®
> GT13®
> MW101 / MW191
> MW251
> MW701D Series
> 501> Fiat TG7 / TG16
> Fiat TG20
> Fiat TG50F / 701F
Steam Turbines
Compressor
REPAIRS AND OVERHAULS
INSPECTION AND REPAIRS
> Steam Turbine Repair
> New Rotor Manufacture
> Advanced Rotor Welding
> Rotor Low Speed Balance
> Rotor High Speed Balance
> Rotor Storage
> Stationary Component
Repairs
> Valve Inspection and
Repair
> Boiler Feed Pump Repairs
> Rotor Inspections
> Centrifugal Compressor
Rotors
> Axial Compressor Rotors
> Shaft Journals and Tapers
> Advanced Rotor Welding
> Re-Staging or Re-Blading
> Rotor Low Speed Balance
> Rotor High Speed Balance
> Stationary Component
Repairs
REPLACEMENT PARTS
> Centrifugal Impellers
> Axial Compressor Blades
> Diaphragms
> Labyrinth Seals & J-Strips
> Bearings Solutions
> Couplings
> Generator Overhaul
> Rotor High Speed Balance
> Stator & Rotor Rewinding
> CO2 Dry Ice Blasting
Electric Motors
> Insulation Systems
> Mechanical Repairs
> Rotor Repair &
Manufacturing
> Armature Winding &
Repair
> Modifications &
Troubleshooting
> Sensors & Accessories
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
VACUUM DEHYDRATION OIL
PURIFICATION SYSTEMS (VDOPS)
COALESCER OIL PURIFICATION
SYSTEMS (COPS)
VARNISH REMOVAL
SYSTEM (VRS)
• Removes Soluble Varnish From
Turbine Oils Through
Adsorption, Utilizing
Ion-Exchange Resin Beads
• Achieve Low Varnish Potential
Rating In Turbine Oil - VPR of
30 or Lower
• Particulate Removal Filter
Element Removes Particulate
Contamination To Meet Or
Exceed ISO 16/14/11
Cleanliness Level
COMMON APPLICATIONS FOR VACUUM DEHYDRATORS:
• STEAM TURBINES (LEAKING STEAM SEALS)
• Rapidly Removes Free Water From ISO 32
Turbine Oil To Overall Content As Low As
100- 150 PPM.
• Particulate Removal Filter Elements Remove
Particulate Contamination To Meet Or
Exceed ISO 16/14/11 Cleanliness Level.
• Meet Or Exceed All Kaydon TurboToc
Material & Performance Specifications .
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
HEAT TRANSFER &
COOLING TOWERS
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
API Heat Transfer
Is a global leader in the design and manufacture of a wide range of heat transfer technologies that service
virtually every industrial market including food and beverage, dairy, compressors, air separation, chemical
processing, mobile vehicles, power generation, pharmaceuticals, HVAC, and a wide variety of general
industrial applications.
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Paharpur Cooling Towers Limited
An ISO 9001 Company
Our broad spectrum of products ranges from
small factory assembled units through large
concrete towers which require construction on
site, air cooled heat exchangers and air cooled
condensers.
Paharpur is also able to provide
aftermarket components for Marley cooling towers.
Morris Sallick Industrial Supplies, Inc.
VAF Cooling Tower Filter Systems
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Award Winning Simplicity in Filtration
Cooling Tower Filtration Systems
V- Series Filters Provide State of theArt
Automatic Self-Cleaning
Filtration
Systems.
Pump Seal
Filtration
Systems
The patented BHD Drive improves screen cleaning efficiencies
resulting in:
(Bidirectional Hydrodynamic Drive)
• 100% screen cleaning with controlled suction nozzle rotation
• Flush waste is less than 1% of filtrate flow
• 70% fewer moving parts
• Individual flow rates from 32 gpm to 5,400 gpm (7.3 - 1,226 m3/hr)
• Pre-assembled filtration systems to meet any flow demand
• Filtration 10 to 1500 micron
Filtration Systems
Tower
Water Outlet
Cooling Tower Basin
Filtered Outlet Water
To Manifold Of
Turbulator TM Nozzles
CTS-200P-05-XXX
Cooling Tower Skid with Pump & V-200PA Filter
Turbulator TM Nozzles
Prevent Settling Of
Particulate To Maintain
A Clean Basin
Sump Drain to
Filtration Skid Inlet
3 x V-1500 Filtration Skid Filtering Reclaimed WaterEntire
Skid Manufactured From 316L Stainless Steel Due To
Corrosive Environment.Power Plant Was Replacing Over
$80,000 In Pump Seals A Month Prior To
Installation.System Operating With Low Pressure Conditions.
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
PROCESS WATER &
FLUIDS HANDLING EQUIPMENT
DRINKING WATER TREATMENT
WATER TREATMENT FOR PROCESS
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
WASTEWATER TREATMENT
SEWAGE TREATMENT
WATER TREATMENT FOR BOILERS AND COOLING TOWERS
Lawsco
Morris Sallick Industrial Supplies, Inc.
Pressure Filtration
OTHER SERVICES
Basic Engineering Projects
Activated Carbon Purifiers
Detailed Project Engineering
Ion Exchange Softeners
Ion exchange resins (Purolite)
Clarifiers
Water Treatment Products
Mixed bed demineralization and Industrial Plant Design
Degassing units
Reverse Osmosis
• Engineering
Ultrafiltration
• Design
Deaereadores
• Construction
Chlorinators
• Water Analysis
Ozonator
Ultraviolet Light
Stock Replacement Parts
Water transfer pumps and Chemical Metering Pumps
Instrumentation (Conductivity, Flow Meters & Sensors, pH
meters, etc.).
ENVIRONMENTAL PROTECTION
Anaerobic Systems / Neutralization
Water Reclamation
Tertiary Treatment
Aerobic Systems
Package System Wastewater Treatment
Neutralization System
Fluoride Removal
Flotation System for Treating Industrial Waste High BOD3 (3000ppm).
Oil Separation Systems
Filter media (activated carbon, Sand, Anthracite, Gravel,
Garnet, Green Arena) Rehabilitation Service and Mainte
nance of Water Treatment Systems Automatic Valves.
-
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Filtration Systems
V-Series Automatic Screen Filters
• Industrial
• Desalinization
• Cooling Towers
• Seawater
• Greywater
• Wastewater
• Process Water
• Irrigation
• Reinjection
Constructed of 316L Stainless Steel
to ASME code - higher grade
materials to meet harsher
conditions or higher temperature
and pressure ranges.
BHD Drive
Motor
Suction
Nozzle
Patented Bi-Directional Screw controls
nozzle rotation for 100% screen cleaning
Without electric motors, gear boxes, limit
switches or pistons
Uni-weld “Sintered” Screen
• 316L Stainless steel
• Eliminates screen wear
• Maximizes filtering area
• 10 to 1500 micron
Flushing
Indicator
LaFarge Cement Plant,
Alabama
Filtration of Recycled
Process Water
2,500 gpm at 300
micron
Intake
Screen
Rotation Governor
Flushing Outlet
• Lowest flush flow rate
• Less energy/smaller pumps required
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
WALWORTH® is a company at which the employees have a vast amount of experiences and dedication. Our personnel have served to keep the company at the leading edge of
design and innovation since it was founded in 1842. Our valves are designed and manufactured to meet the most stringent special requirements of various industries, including
power generation, chemical and petrochemical, oil and gas, pulp and paper, mining, cryogenic and ship building applications.
VALVE TYPES: Gate, Globe, Check, Ball, Pressure Seal, AWWA Butterfly and Plug Valves
MATERIALS:
• Carbon Steels (Medium and Low-Carbon)
• Chromium Alloy Steels
• Austenitic Stainless Steels
• Duplex Stainless Steels
• Nickel Alloys (Incoloy, Inconel, Hastelloy, etc.)
• Aluminum Bronze
• Ductile Iron
PRESSURE CLASSES
Walworth® products are offered in pressure
classes 150 to 4500.
SIZES
½” to 72” in diameter.
TESTS
Our facilities have equipment for non-destructive examinations, mechanical tests and functionality tests such as:
• Radiography
• Liquid Penetrants
• Ultrasonic
• Hardness Tests
• Cryogenic Service Tests
• Magnetic Particles
• PMI
• Stress Tests
• Fire Tests
• Fluid Control Tests
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
AWWA Butterfly Valves
Cast Iron Valves
Size: From 3" to 72"
Pressure range: 150 psi
Body Materials: Cast iron, high resistance cast iron
Design Feature: In accordance with AWWA C-504
Type: Gate, Globe and Swing Check Valves
Size: Gate valves from 2" to 36"
Globe valves from 2" to 12"
Swing check valves from 2" to 24"
Pressure Range: 125 psi
Designed in accordance with the following standards:
- MSS SP-70 for Gate Valves
- MSS SP-85 for Globe Valves
- MSS-SP-71 for Swing Check Valves
Safety and Relief Valves
Size: Orifices from D to T
Pressure Range: 150x150, 300x150 and 600x150 psi
Body Materials: Bronze for safety valves and steel for
safety and relief valves
Design Feature: In accordance with ASME Sec.
VII and API-526
Cast Bronze Valves
Type: Gate, Globe and and Swing Check Valves
Size: From 1/4" to 2"
Pressure Range: 125 and 150 psi
Design Feature: Design in accordance with MSS-SP 80
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Steel Lubricated Plug Valves
Pressure Seal Valves
Types: Top Entry and Bottom Entry
Pattern:
- Short - From 2" to 12"
- Regular - From 1/2" to 12"
- Venturi - From 6" to 36"
Materials: Carbon steel, stainless steel, alloyed steel
Pressure Range for Bottom Entry:
- ASME 150 (PN20), 300 (PN50), 600 (PN110),
900 (PN150), 1500 (PN260) and 2500 (PN420)
- API 2000, 3000 and 5000
Pressure Range for Bottom Entry:
- ASME 150, 300 and 600
Types: Gate, Globe and Check (Stop Check, Piston
Check)
Sizes: From 2" to 24"
Class: 600, 900, 1500 and 2500 psi
Materials: Carbon steel, stainless steel and
alloyed steel.
Trim: API-600 or as specified by the customer
Design Feature: ASME/ANSI B16.34
Iron Lubricated Plug Valves
Duo Check Valves (Dual Plate)
Types: Top Entry in 3 patterns: Short, Regular and
Venturi in sizes from 1/4" to 36"
Pattern:
- Short - From 2" to 12"
- Regular - From 1/2" to 12"
- Venturi - From 6" to 36"
Materials: Carbon steel body and iron plug
Iron body and plug
Size: From 2" to 48"
Class: From 150 to 1500 psi
Materials: carbon steel, stainless steel and alloyed steel
Trim: In accordance with MSS-SP 594 or as specified
by the customer
Classes: Steel Body and Iron Plug: ANSI 150 and 200 CWP
Iron Body and Plug: 175 CWP, 200 CWP and 500 CWP
Design feature: In accordance with API-599
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Cast Steel Valves
Types: Gate (sizes from 2" to 72"), Globe (sizes from 2" to 20"),
Check (sizes from 2" to 48")
Pressure Range: ANSI 150, 300, 600, 900 and 1500
Design features: Gate Valve design in accordance API 600
- Globe Valve design in accordance ASME/ANSI
B16.34
- Check Valve design in accordance API-6D
Body Materials: Carbon Steel, Stainless Steel, Steel Alloys, Nickel
Alloys, Hastelloy, Incoloy, Etc.
Forged Steel Valves
Types: Gate, Globe & Check
Sizes: From 1/4" to 2"
Pressure Range:
- Socket Welds, Threaded and Combined Ends: ANSI Classes 800,
1500 and 2500
- Flanged Valves: ANSI Classes 150, 300, 600, 900 and 1500
Design features: Gate valve design in accordance with API 602
Body Materials: Carbon Steel, Stainless Steel, Steel Alloys, Nickel Alloys,
Hastelloy, Incoloy, Etc.
Ball Valves
Type: Trunnion Mounted
Sizes: From 2" to 48"
Pressure Range: ANSI/ASME 150, 300, 600,
900 and 1500
Body Material: Carbon steel, stainless Steel
Trim: NACE, low temperature and stainless steel
Design Features: In Accordance with API-6D
Slab Gate Valves
Sizes: From 2" to 36"
Pressure Range: ANSI/ASME 150, 300, 600, 900
Body Material: Carbon steel, stainless Steel
Trim: NACE, low temperature and stainless steel
Design Features: In Accordance with API-6D
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
45 YEARS OF EXPERIENCE AND TRUST
At ORBINOX we offer a wide range of knife gate valves, penstocks, clampers and special valves for waterworks which cover a
wide variety of applications such us wastewater, bulk handling, pulp & paper and other process industries. Over 45 years’
- expe
rience in the international as well as the trust of our customers vouch for the success that we have achieved in design, market
worldwide, manufacturing and distribution.
-
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Founded in 1926, Graco is a world leader in fluid handling systems and components.
Graco products move, measure, control, dispense and apply a wide range of fluids and
viscous materials used in vehicle lubrication, commercial and industrial settings.
Process Solutions
Husky 205
Husky 307
Husky 515
Husky 716
Husky 1050
Husky 1590
Husky 2150
Husky 3275
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
THE MOST ROBUST CENTRIFUGAL PUMPS IN THE MARKET
THE ONLY PUMP MANUFACTURER ABLE TO PROVIDE
A TRUE HYDRO-DYNAMIC SEAL
-
The dynamic seal provides for zero leakage of
the pumped product without the need for
costly mechanical seals, packing, and lip
seals or in most cases seal water and the
associated supporting seal water systems.
Product dilution due to seal water is further
eliminated.
With no rubbing seal components to fail over time, the
dynamic seal can operate reliably over the life of the hydraulic
wet end of the pump.
Dynamic seals can offer reliable service in difficult applications that may include; varying amounts of solids, liquids that
are close to saturation prone to crystallizing, scaling liquids
and where operational upsets such as cavitation, dead heading of the pump and even dry running can occur.
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
ELIMINATE PUMP OUTAGES FOREVER
- Most pump forced outages are related to failure of their seals be that mechanical or rope seals.
- Our pumps do not have any seals - they have a special impeller that creates an air bubble that acts as a seal - this type of seal is
called a hydro-dynamic seal. Our hydro-dynamic seal is backed up by another seal that only operates when the pump is not in
operation - this seal opens up by centrifugal force and therefore it will last the life the pump. Please note that we are the only pump
manufacturer that operates a hydro-dynamic seal with a centrifugal type of secondary seal - this double sealing technique
guarantees the elimination of outages due to sealing failures.
- Our pumps are also 20% to 50% sturdier than any leading pump in the market.
- Our pumps are able to handle solids up to 65% by volume.
- When dealing with slurries or highly abrasive liquids we have ability to remove the impeller from directly contacting the flow, this is
done via a vortex action - this dramatically reduces impeller wear and eliminates the chance of impeller damage thus we avoid
impeller related forced outages.
- Our pumps can handle water as well as harsh chemicals.
- Conventional pump seals need to be cooled, the simplest method of cooling a seal is by either injecting water into the system or by
letting the product leak out. Since our technology does not use any seals we eliminate the injection of liquids into the system or the
leaking out of valuable product. Please note that in certain processes any water that is injected into the system has to be
subsequently evaporated - this is the single most expensive expense of running a pump with conventional seals.
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
ELECTRICAL, CONTROLS,
AUTOMATION &
INSTRUMENTATION EQUIPMENT
Morris Sallick Industrial Supplies, Inc.
Process instrumentation & Analytics
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Pressure
temperature
P
P/p
Positioners
Instrument
panel
electropneumatic
Drivers
Pneumatic
Flow
level
capacitive
Ultrasonic
Plotters
Radar
Guided Wave
Ultrasonic
Static and dynamic weighing
Software
Totally Integrated Automation
and Micro Automation
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Logic Control
Intelligent Relays
Operatior Interface
Power Supplies
Metering, Modular
Programmable Logic Controllers
Metering, Combination
Pushbuttons & Selectors
Metering, Safety Sockets
Relays and Timers
Integrated Facility Systems
Sensing and Monitoring Relays
Network Protectors
Pow-R-Command Lighiting and load Control Specific Control & Display (Durant)
Stackilghts
Switchboards
Automatic Transfer Switches
Terminal Blocks, Fuse Blocks & Fuse Holders
Busway
Vehicle and Conmercial Controls
Transformers
Afteermarket and Renewal Parts
Power Quality & Management
Vacuumlnterrupters
Application and Strart-up Support
Tenant Metering
Communications Hardware
ATS Drawings
Motor Control
DC Power Supplies
Bypass lsolation Transfer Switches
Enclosed Control
EPDU rack/based power distribution
Free Standing Transfer Switches
Accessories & Renewal Parts
Harmonic Mitigation
Interactive Demos
Accessories
Brakes & Solenoids
High Resistance Pulse Grounding
Residential Transfer Switch
Adjustable Frequency Drives
Communication and 1/0 Products
Innovative Technology TVSS
Wall Mount Transfer Switches
Definite Purpose
Crane Control Products
Metering (IO & Power Xpert)
Enclosures
DC Contactors
Power Conditioning
IEC Rated Products
Definite Purpose
Circuit Protection
Power Distribution – Floor based
Lighting Contactors
Disconnect Switches
Power Factor Correction
Manual Motor Control
Dynamic Braking Resistors
Digitrip Retrofit Trip Units
Power Monitoring Systems (Power X pert)
Multispeed Starters
IEC Starters & Contactors
Industrial Miniature Circuit Breakers
NEMA 7/9 Products
Low Voltage Adjustable Frequency Drives
Low Voltage Power Breakers
Pump Panels
Manual Motor Control
Medium Voltage Power Breakers
Reduced Voltage
MCC Aftermarket Solutions
Power Fuses
MCC communications
Series G Molded Case Circuit Breakers Vacuum Break Control
Medium Voltage Ajustable Frequency Drives
Series C Molded Case Circuit Breakers
Madium Voltage Motor Control
Specialty Molded Case Circuit Breakers Lighting Control
Morot Control Centers
Lighting Contactors
NENA Starters & Contactors
Lighting Panelboards
Pow/R/Command Lighting and Load Control Overload Relays
Reduced Voltage Solid-State Starters
Vacuum Control
Aftermarket
Products
Services & Support
Electrical Distribution
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
AUTOMATION SPECIALIST
INDUSTRIAL PROCESS CONTROL
•INSTALLATION OF ELECTROMECHANICAL EQUIPMENT.
• INSTALLATION AND PARAMETRIZATION OF INSTRUMENTATION EQUIPMENT.
• AUTOMATION OF EXISTING EQUIPMENTS AND/OR PROCESSES.
• MAINTENANCE, UPDATING AND IMPROVING OF EXISTING AUTOMATED SYSTEMS.
• ASSEMBLY OF MOTOR CONTROL CENTERS (MCC) IEC AND NEMA.
• PLC AND HUMAN MACHINE INTERFACE (HMI) PROGRAMMING
• CONTROL SYSTEMS ENGINEERING CONCEPTUALIZATION, DESIGN AND DEVELOPMENT
• PROGRAMMING AND PARAMETRIZATION OF PROCESS CONTROLLERS.
• DESIGN AND ASSEMBLY OF POWER FACTOR CORRECTION EQUIPMENT.
• DESIGN AND ASSEMBLY OF CUSTOM AUTOMATIC TRANSFER SWITCHES.
• POWER QUALITY MEASUREMENT, ANALYSIS AND CORRECTION.
• ENERGY SAVINGS STUDIES.
• AUTHORIZED SYSTEM INTEGRATOR FOR LEADING BRANDS OF INDUSTRIAL AUTOMATION AND
CONTROL EQUIPMENT.
SYSTEMS
INTEGRATORS
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
NUCLEONIC LEVEL GAUGES
Tracerco provides a full range of nucleonic level measurement detectors . By providing a full range
of technologies and not limiting to one or two techniques, Tracerco can provide a solution to any
client request, and provide the most effective and safe transmitter by tailoring the measurement to
the specifics of the clients operations. Tracerco's software (inside each nucleonic level measurement instrument) is the most advanced currently available, providing adaptive techniques to track
process changes faster than any other system on the market, reducing noise, improving response
and providing a solution using the smallest source size for worker safety.
The nucleonic level measurement product family allows:
• Ultra sensitive design enables highly accurate measurements with small source size
• Detectors tuned to the specific radiation source in use, and not susceptible to interference
• Real time external measurements without contact with the process
• Simplified design and construction, resulting in a dramatic saving to the customer
• Low maintenance and spare requirements due to the simplicity of design
• Both process wetted, and non-wetted (non-intrusive) possibilities
• Automatic source decay compensation
• Automatic pressure compensation
• Simple two-wire or three-wire communications wiring
• Zones 0, 1 and 2 use - Intrinsically Safe
• HART, Modbus, Foundation Fieldbus options
• Plastic or Sodium Iodide Scintillators, and GM tube options available
• Measurements can be provided of: Oils, emulsions, foams, water, sand, condensates, liquids,
solids, rag layers, middlings and many other process variables.
Emission points
Detection points
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
TRACERCO™ Smart Density Gauge
The TRACERCO™ Smart Density Gauge is a non-intrusive, non-wetted field instrument which utilizes advanced
nucleonic measurement technology. The instrument, which is a fully bespoke design, can easily be fitted to new
production vessels or retrofitted onto exiting units.
Principle of Operation
A narrow beam from the radioactive source is directed though the vessel or pipe to a detector mounted opposite. The beam will be attenuated by the vessel walls and the process
medium. As attenuation by the walls is constant any variation in intensity at the detector will
be caused by the process medium. During calibration a density to intensity relationship is
established which allows the signal processor to compute any density from the measured
intensity at the detector.tion vessels or retrofitted onto exiting units.
The detector (PRI 116c-ATX) comprises a scintillator (crystal) and a high voltage photomultiplier tube. Gamma radiation entering the crystal produces minute pulses of light at a
frequency proportional to the intensity of radiation. The light pulses are detected by the
photocathode of the photomultisplier tube and converted to small voltage pulses. These are
amplified within the tube to a size sensible for further amplification by the detectors
electronic circuit.
Pulses of a standard height are then passed via the interconnecting cable to the PRI 160
HART interface. Because of the statistically random nature of this pulse stream, an integrating factor (time constant) is applied. This steadier signal is computed into a figure for
density. Temperature correction may be made before a final density figure is displayed and
transmitted to the plant’s instrumentation.
Emitter
Detector
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
COMPLIANCE
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Digital Manometer
MRU INSTRUMENTS, INC
PROCESS ANALYZERS
5 Gas Handheld
AmPro 2000
GAS ANALYZERS
O2, CO, NO + NO2 and SO2 or H2S or High CO
THE MOST POWERFUL HANDHELD
MULTIGAS ANALYZER FOR INDUSTRIAL
COMBUSTIONS, EMISSION AND
PROCESS MONITORING MEASUREMENTS
USING UP TO 5 ELECTROCHEMICAL SENSORS
• Modern, slimline enclosure with fixing magnets
• Super bright, colour 3,5” TFT-display with LED
backlight.
• Rechargeable Lithium-Ion battery for min. 15 hours
operation.
DM9200
Multi ranges, multi
features
5 Gas Portable
Gas Detectors
300CO
AmPro 1000
DELTA 1600S-IV
O2 + CO, NO, CO2 & Hydrocarbons
• Compact portable analyzer for robust
industrial applications using NDIR & electrochemical sensors.
• Robust sample pump
O2, CO, NO, NO2, SO2, or H2S or
O2 + CO, NO, NO2, SO2, or H2S
THIS IS THE IDEAL COMBUSTION ANALYZER
FOR INSTALLATION AND MAINTENANCE
ALWAYS DEPENDABLE
Main features:
• Smallest instrument with ergonomic and modern design
• Rugged rubber protection case with fixing magnet
• Optimized condensate trap with reusable star
filter (PTFE)
•Well legible, backlit LCD display
• Mini USB interface for cable data transfer to PC and internal
battery charging
• Data storage for up to 100 measurements
• Integrated rechargeable batteries (NiMh) for min. 8 hours
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
4 Gas Mobile
NOVA 2000
O2, CO, CO2, NO, NO2, or SO2
• Heavy duty workhorse for the toughest jobs
• Complete basic instrument, ready to take measure
ments.
• Upgradable to top-of-the-line capabilities using versa
tile hardware and software.
• Very secure: select materials used in construction
and most functions are monitored electronically.
• Up to 4 electrochemical cells
• Suitable for solid fuel combustion measurements.
PORTABLEP ROCESS
GAS ANALYZER
MGA 5
Monitoring of Process gases / Combustion emissions Heat
efficiency at large boilers High quality combustion analysis
O2, CO, CO2, NO, NO2, SO2, CH4, H2, & C3H8
• Double stage gas cooler with automatic condensate
draining pump
• Heated gas sampling line (120" or 200")
with 12" ... 80" sample tube
• Large, high contrast and backlit graphical display with
zoom function
• RS 232 interface and internal data memory
for approx. 8,500 measurements
9 GAS MOBILE
VARIOPLUS
O2, CO, CO2, NO, NO2, SO2, H2S, H2 & Hydrocarbons
• Virtually a mobile CEMS
• Modern, rugged metal enclosure designed for the
roughest applications
• Effective, integrated flue gas conditioner with gas
cooler & condensate pump
• Auto zero
• Optimized filter elements for protection against
particulates
• Built-in, high speed, easy-load printer
PORTABLEP ROCESS
GAS ANALYZER
SWG 200-1
Gas analysis of combustion processes
and special gases
O2, CO, CO2, NO, NO2, SO2, CH4, H2, H2S & CxHy
• Standard extractive analyzer for process and
environmental measurements
• Complete sample gas conditioning system
• NDIR & long-life EC sensors
• Backlit LCD display and menu-guided operation
• 4 – 20 mA and RS485 outputs
• Wide range of probes available
• Flue and air gas temperature measurements
• PC based software
• Auto zero
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
IN-SITU O2 AND COe
OMS 420
O2, and COe
STATIONARY
CEM SYSTEMS
• Modern, field-proven “hollow probe” design
• A single technician can access sensors in minutes
for maintenance or service.
• Auto calibration available
• Electronics can be located on the probe, or up to
33’ away
• High pressure blow-back keeps probe clean even
in a difficult application like a coal-fired power plant
SWG 300-1
Customized compact analysis systems
O2, CO, CO2, NO, NO2, NOx, SO2, & CH4,
Individual applications
• Ex-zone2 (special model)
• Up to simultaneous 7 gas components
• Up to 5 automatic sampling point switching
• Weather proof enclosure IP 65
• Complete / partial air conditioning
• Automatic calibration with test gases
• Sample gas conditioning, also directly after the
sampling point
• Easy to service and maintain
• Customized solutions on request
DUST / OPACITY MONITOR
DM 401
DUST or OPACITY
Dust Monitoring System
Double pass transmission measurement
Measures 0 ... 100 % opacity
or 10 ... 1,000 mg/m3 dust (*)
(*) after on site calibration according to VDI 2066
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
EcoPulse PulseJet Fabric Filter for
particulate matter capture.
OptiVap Evaporative Spray Cooling
System for hot gas cooling.
EcoSorb Limestone Emission Control (LEC).
Turbulent Fluid Bed (TFB) Systems for the
control of gaseous pollutants.
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
ENGINE BASED POWER
GENERATION
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
SWIVEL ANGLE MIXERS IN YOUR STORAGE TANKS WILL
PREVENT THE ACUMULATION OF TANK BOTTOMS
Through extensive computational fluid dynamics (CFD) analysis, Philadelphia Mixing Solutions has proven the inadequacies of the industry standard propeller and
shows why their propellers along with their swivel angle mixers can prevent deposition of particulates into your tank bottoms. By utilizing the most advanced technology available in the marketplace PMSL has not only been able to create a propeller that is superior in design, but also remove the mystery of what is happening inside
the tank!
Standard propeller
Philadelphia's advance propeller
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
TOP QUALITY CENTRIFUGES & DECANTERS SINCE 1927
CENTRIFUGE AND DECANTER REPAIRS - WE REPAIR ALFA LAVAL
&&WESTFALIA
WESTFALIAEQUIPMENT
EQUIPMENT
SPARE PARTS FOR ALFA LAVAL & WESTFALIA CENTRIFUGES
HUTCHISON HAYES
SEPARATION INC.
Manufactured in Houston, TX, USA
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Founded in 1926, Graco is a world leader in fluid handling systems and components.
Graco products move, measure, control, dispense and apply a wide range of fluids and
viscous materials used in vehicle lubrication, commercial and industrial settings.
Process Solutions
Husky 205
Husky 307
Husky 515
Husky 716
Husky 1050
Husky 1590
Husky 2150
Husky 3275
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
INCREASE THE EFFICIENCY OF YOUR ENGINES BY USING WATERLESS COOLANT
Evans Waterless Coolant enables an engine to run safely at hotter temperatures. Both the fan-on temperature and
the thermostat temperature can be raised. These have shown a substantial increase in fuel efficiency in independent lab testing, while exhibiting even higher results in real-life case studies.
ADDITIONAL BENEFITS OF USING WATERLESS BASED
COOLANTS VS. WATER BASED COOLANTS
Evans Waterless Heavy Duty Thermal Coolant Reduces maintenance and wear-and-tear.
Traditional 50/50 glycol-water solutions waste a substantial amount of fuel just to keep the water
segment from reaching its boiling point. Over time, water also becomes acidic and causes erosion of
engine components. A major reason why 40% of maintenance costs are cooling system related.
Eliminating the cavitation and corrosion that can kill an engine.
Flash vaporization takes its toll on pumps, cylinder liners and hose systems. Evans Waterless HDTC prevents hot spots in
the engine through constant contact with the hot metal. Reducing overall system stress and preventing rust and baked-on
additives that can shorten engine life.
The sustainable solution you never have to replace.
With Evans Waterless HDTC, regular coolant change-outs and disposal costs are a thing of the past. Plus, our fuel savings
lead directly to fewer emissions. Evans Waterless HDTC contains an inhibitor that lowers the toxicity of ethylene glycol.
Explore the additional details on our website, and on the reverse side of this piece. Then contact us for a customized
proposal for your fleet.
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
COMPLETE BUNKER FUEL FILTERING
SYSTEM FOR ENGINE BASED POWER GENERATION
• Removes Water (Free, Emulsified, and Dissolved) To Overall Content As Low
As 20 PPM
• Removes Entrained Air & Gases
• Particulate Removal Filter Element Removes Particulate Contamination To Meet
Or Exceed ISO 16/14/11 Cleanliness Level
VACUUM DEHYDRATION OIL
PURIFICATION SYSTEMS (VDOPS)
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
VDOPS SCHEMATIC
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
INCREASE FUEL EFFICIENCY AND EXTEND THE LIFE OF YOUR
ENGINES/GENERATORS VIA FILTERING OF DIESEL FUEL
RECIRCULATES AND FILTERS FUEL IN STAND-BY DIESEL GENERATOR TANKS
SPECIAL DESIGNS CAN AUTOMATICALLY PUMP FILTERED FUEL FROM BULK TANK TO GENERATOR BELLY
TANKS
REMOVES PARTICULATE CONTAMINATION AND MOISTURE FROM DIESEL FUEL
ACHIEVES FUEL CLEANLINESS LEVEL AS LOW AS ISO 14/13/11
LOWERS OVERALL MOISTURE CONTENT IN FUEL TO 50 PPM OR LOWER
REMOVES PARTICULATE CONTAMINATION AND MOISTURE FROM DIESEL FUEL
AND/OR GASOLINE
CAN HANDLE FLOW RATES FROM 10 GPM TO 500 GPM OR HIGHER
ACHIEVE PARTICLE COUNTS AS LOW AS ISO 14/13/11
ACHIEVE MOISTURE CONTENT AS LOW AS 15 PPM
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
COAL / COKE FUEL BASED
POWER GENERATION
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Köppern
Provides roll press technology for the briquetting and compaction of fine materials
and for the comminution of mineral materials since over 100 years. Close to 1,000
roll presses have been supplied to various industries. Köppern roll presses offer
special features such as the hinged frame and Hexadur® wear protection. Material
testing facilities are available in Germany, Canada, USA and Australia.
• Sponge Iron
• Steel Mill Residues
• Coal
• Magnesium Oxides
• Cast Iron Borings
• Filter Dusts
• Chromium Ore
• Copper Concentrates
• etc.
• Potash
• Ammonium Sulphate
• NPK-Fertilizers
• Sodium Sulphate
• Salts
• Soda Ash
• Roasted Pyrite
• Ceramic Material
• etc.
• Cement Clinker
• Limestone
• Ores
• Kimberlite
• Quartzite
• Nickel
• Kieserite
• Coal
• etc.v
Profiled HEXADUR® roll surface
Morris Sallick Industrial Supplies, Inc.
UNIVERSAL
ENGINEERING
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
UNIVERSAL ROLL CRUSHERS
FOR COAL
SINGLE STAGE SINGLE ROLL
• Reduces R.O.M. coal to 1-1/2” product in a
single pass
• Long teeth on roll grip material and pull it
into the V-shaped crushing chamber
• Economical low horsepower, low speed operation
• Low headroom requirements.
• Models available for all specifications and
materials
UNIVERSAL ROLL CRUSHERS
The complete line of Universal Roll Crushers for coal
Every Universal Roll Crusher is built to provide years
includes sizes and types for many coal crushing
of dependable service. Anti-friction bearings carry
applications. Both single stage and two stage
the large roll shafts and assemblies smoothly . The
models are available for primary, secondary or
bearings are close to the rolls so they carry the load
combined crushing. Run of the mine coal can be
efficiently and eliminate the danger of shaft flexing.
quickly and efficiently reduced to the desired size
The heavy duty drive gear and pinion used in
without excessive fines. Universal Roll Crushers offer
Universal Roll Crushers are heat treated. They
Reduction byshear and attrition in the single roll
provide positive, efficient power while withstanding
model and reduction by impact and compression
heavy shock loads. Machine cut teeth assure smooth
between the rolls of the multiroll models.
operation and longer life.
The Universal Triple Roll Crusher combines primary
With two sets of rolls, the Universal Four Rollcrusher
and secondary reduction in a single, compact unit.
can reduce 10” R.O.M. coal to a 1/2”cubical product
As the diagram illustrates, the primary roll is
quickly and efficiently. As theabove diagram
mounted above the two secondary rolls. Capacity of
illustrates, the roughing rollshave long teeth to catch
this versatile unit ranges from 100 to 300 STPH
material and pull itdown. The crushed coal from the
depending on the type of coal being crushed and
roughingrolls falls directly onto the finishing rolls.
desired product size.
Eachset of rolls is independently adjustable to
SINGLE STAGE DOUBLE ROLL
• Hydraulically adjustable roll setting keeps fines
to a minimum
• Rubber tire drive eliminates heavy star gears
• Meshing teeth reduce hard coals by impact
• Ten sizes available
controlproduct size and flow. Capacity rangesto 500
STPH.
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
ANALYZE COAL AS IT IS BEING DELIVERED TO YOUR
PORT TO DETERMINE IF IT MEETS YOUR REQUIREMENTS
SABIA
offers analyzers to assist your plant in
blending measurement and control, receiving
validation, advanced combustion and post combustion control, emissions control from feedstock
knowledge, test burn, and purchasing opportunity
evaluation. SABIA analyzers provide realtime
elemental analysis through continuous measurement of the elemental composition of the material
under test. The list of displayed analysis results is
completely user defined and can include the amounts
of sulfur, total ash, any or all ash constituents, as well
as moisture content and BTU ratings. Using PGNA
elemental analysis combined with our proprietary algorithms the analyzer integrated moisture feature measures the total moisture of the coal, enabling a more
accurate BTU result.With a SABIA analyzer you can:
Optimize boiler efficiency Meet environmental regulationsControl blending Reduce derates Eliminate
unplanned shutdowns
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Safety for Coal Grinding Systems
We provide explosion protection and related services for industries typically using coal, lignite,
and pet coke. We design complete concepts for explosion protection for the cement industry,
such as the new compact combination of separation and fines coal storage. Thorwesten Vent’s
air-cushioned explosion doors of the 2nd generation in various sizes and designs ensure
protection.We also supply engineering and hardware packages for solid fuel silos including
safety andprocess instrumentation, top of silo dust collectors, explosion doors, discharge aids
etc.
THORWESTEN VENT GmbH
Daimlerring 39 . 59269 Beckum / Germany . Tel. +49(0)2521/9391-0
thorwesten.vent@thorwesten.com . www.thorwesten.com
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Complete
concepts for
your project
Individual
designs and
sizes
Full
engineering
and hardware
supply
Constructional
explosion
protection
We provide complete solutionsand
related services for industries
typically using coal, lignite,pet coke
and secondary fuels
2 barg pressure shock
resistant secondary fuel silowith
the TV patent flat roof
2 barg pressure shock
resistant flat bottom with
discharging unit
The design includes all interfaces for infeed
box or other charging devices, TV nuisance
Silo top filter, explosion vents, instrumentation
and access.
Most secondary fuels need a sweeping augerfor
discharging. Additional to the conicalcylindrical
section, a recirculation system canbe installed to
prevent bridging of the dust.
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
From product selection and design to maintenance and repair,
Dings is ready to help you with your magnetic separation needs
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
RULMECA is a worldwide Group of Companies, specialising in the
production of rollers/idlers, motorized pulleys, fabricated pulleys and
other components for the worldwide bulk handling industry.
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Phoenix
Conveyor Belt Systems GmbH has produced conveyor belt, which include world
records such as the strongest belts, both textile and steel cord,
the steepest overland, and the world's heaviest belt.
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Skirting Sealing Systems
and Dust Control
Arrowhead Pulley Lagging
Conveyor Safety Equipment
Conveyor Accessories
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Primary Belt Cleaners
Secondary Belt Cleaners
Transfer Point Design Technology
Belt Tracking Idlers
Load Zone Support
Systems
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
FMC Technologies
Has a proud history of providing bulk material handling
solutions to industries worldwide. Around the globe,
our name is synonymous with problem solving capabilities
and material handling expertise.
• Conveyor Belt Idlers
• Impact Beds
• Belt Trippers
• Stackers
• Apron Feeders
• Belt Feeders
• Rotary Plow Feeders
• Rotary Table Feeders
• Syntron Feeders
• Linkbelt Screw Feeders
• Vibrators (Electromagnetic, Electric rotary & Pneumatic types)
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
BIOMASS FUEL BASED
POWER GENERATION
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
WEIGHBELT FEEDERS
THE ONLY WAY TO TRULY MEASURE YOUR BOILERS EFFICIENCY
Over 50 years ago WOHWA developed the first weigh belt
feeders. Since that time WOHWA produces all the components
for all WOHWA weigh belt feeders in house at its factory in
Germany.
The robust WOHWA weigh belt feeders are available in belt
widths from 16” (400mm) to 56” (1400mm) to satisfy all
customer requirements of capacity and can handle all variations in material characteristics, flow characteristics and
applications.
All weigh belt feeders are furnished with troughed belts or
Flexo Well belts. Precise design eliminates forces that can
have an influence on the accuracy of the belt scale.
Depending on the application and the material characteristics
each feeder can be furnished with different WOHWA shut off
sliding gates. Type 02, 03, 08 or 01.1 can be utilised to cover
a wide range of variants.
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
MAINTENANCE
EQUIPMENT
EXTRA
HEAVY
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
MEDIUM
Preferred by leading companies in over forty
countries, Cooper reliability keeps the
wheels of industry turning in some of the
world's harshest industrial environments.
The ability to fit Cooper in trapped application
and limited access locations is one of the
major factor in specifying Cooper.
01 Series
Medium Duty Bearing
HEAVY
02 Series
Heavy Duty Bearing
03 Series
Extra Heavy Duty Bearing
CUSTOM BEARINGS
Flat Thrust
Bearings
04 Series
High Speed Bearings
Watercooled
Bearings
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
BENEFITS OF USING COOPER'S SPLIT BEARINGS:
- Ideal in trapped bearing applications and limited access locations.
Cooper units are split in symmetrical halves, reason for which they can be replaced at a fraction of the time taken by
conventional pillow block bearings.
- Significant reduction of your stock of bearings
Cooper Bearings have such radial and axial capacities that they may be able to replace many different types
of bearings with one type of Cooper Bearing - onsite bearing inventory stock can thus be reduced and simplified
as only one type of bearing per shaft diameter would be needed.
- Replacement costs are reduced dramatically
Because only the inner components are renewed. The housing is kept in place and used over and over.
Cooper bearings are more robust than conventional bearings and for that reason they last longer
- Save energy
Cooper bearings are more efficient than conventional bearings.
- Reduce missalignment problems .
Cooper bearings accept missalignment of up to 2.5%.
- Our bearings outlast any other bearing in the market.
Because they have a special type of seal that rotates with the shaft inner contamination is virtually eliminated
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Process Equipment
Air-Operated Pumps for Process Industries
55 Gallon Drum Transfer and Supply
Maintenance and Production Cleaning
Pump from your 55 gallon drums with our double diaphragm or
piston evacuation pumps. They offer flow rates up to 16 gpm,
and are available in: aluminum, carbon steel, stainless steel,
polypropylene and acetal materials of construction.
Designed for rugged dependability, pneumaticallydriven pumps offer simplicity in design, operation
and maintenance. They provide high pressure for
water and cleaning chemicals up to 3,000 psi and
flow rates up to 9 gpm.
Pneumatic
Double Diaphragm/
Piston Evacuation
Bulk Tank Supply and Evacuation
husky™
Air-Operated
Double Diaphragm
Husky™
air-operated double diaphragm pumps are ideal for
unloading above or below ground tanks of any size.
They are available in a wide range of sizes including:
1/4 in (6.3 mm), 3/8 in (9.4 mm), 1/2 in (12.7 mm),
3/4 in (19.1 mm), 1 in (25.4 mm), 1-1/2 in (38.1 mm),
2 in (50.8 mm) and 3 in (76.2 mm).
Key Fluids
• Paints, stains, coatings, inks and dyes
• Chemicals
• Acids
• Corrosive and abrasive fluids
• Lubricants
• Ceramic glazes
• Sludge, slurry and waste fluid
• Soaps, detergents and solvent
Key Applications
• Transferring fluids from drums
• Sanitizing buildings and equipment
• Removing waste fluid
• Unloading fluids
• Draining tanks and sumps
• Transferring high temperature acids
• Skimming and transferring oil
• Servicing lubrication equipment
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Graco offers a complete range of high
performing automatic lubrication solutions
Pumps, metering devices, controllers and accessories for any budget or market.
Single Point Lubricators
Series Progressive Systems
Simple, reliable, and straightforward. Automatic
lubrication benefits with minimal up-front
investment–nothing could be easier.
The most advanced centralized
lubrication solution–period.
Provides positive lube cycle
feedback, and is the system of
choice when critical operations
need protection against downtime
Single Line Resistive Systems
Resistive products are the starting point for
centralized automatic lubrication, offering simple
oil metering solutions for tight spaces and
budgets.
Air/Oil Systems
Single Line Parallel Systems
Straightforward designs that deliver precise
mounts of lubrication to multiple points, simultaneously. Easily expandable as your requirements
grow.
A constant flow of air helps keep
bearings cool and free of
contaminants while a precise
amount of oil is supplied to ensure
proper lubrication. Uses series
progressive metering technology
for positive lube cycle feedback.
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
G-Force™ Pressure Washers
Graco’s Complete Line of Professional Pressure Washers
G-Force 3540 GHW
Hot Water • Direct Drive • Severe Duty
High-Pressure Gun and Hose
The G-Force 3540 GHW hot water pressure washer is for those applications where cold
water just won’t cut it. With hot water you can effectively clean grease, oil or any other
heat reactive substance. use this pressure washer for the most demanding jobs needing
hot water.
- Non-marking 50 foot hose has quick onnects,
swivel and bend restrictors
- Professional-grade insulated trigger gun
comes with insulated dual lance
diesel fired Burner
AR RKV Series Pump
- Direct drive triplex piston pump
- Aluminum, oil-bath crankcase with cooling fins
- Solid ceramic plungers with continuously
lubricated packings
- Thermal relief valve protects the pump from overtemperature conditions
- Built-in low pressure chemical injector with 4 foot
tube.
Honda Power
- Honda GX Contractor Grade Series engine delivers
maximum performance
- Contractor preferred engine with Oil Alert
- Burner can run off of No. 1 or 2 diesel or
kerosene
- Maximum outlet temperature of 200° F [150°
F rise]
- Easy coil drain helps prevent freezing in cold
weather
- High quality fuel filter/water separator
ensures clean fuel supply
rugged Steel frame
- Reinforced powder coated steel frame with
center lift hook
- Gun and hose holder for easy transport and
storage
- Tubed pneumatic tires roll easily over rough
terrain and hold up to the harsh jobsite environment.
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
PORTABLE FILTRATION SYSTEMS (LOW-FLOW) DEDICATED KIDNEY-LOOP FILTRATION SYSTEMS
10 GPM Dual Spin-On Filter Cart
For Low Viscosity Oils
10 GPM Single 820X Filter Cart
For High Viscosity Oils
10 GPM SINGLE 840X FILTRATION SYSTEM 15 GPM DUAL 840X FILTRATION
SYSTEM
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Vacuum Dehydration Oil Purification Systems (VDOPS)
COMMON APPLICATIONS FOR VACUUM DEHYDRATORS:
•
•
•
•
•
•
•
•
STEAM TURBINES (LEAKING STEAM SEALS)
BOILER FEED PUMPS
EHC SYSTEMS (PHOSPHASE ESTER – FYRQUEL)
HYDRAULIC POWER UNITS & RESERVOIRS
LARGE GEARBOXES
USED OIL RECLAMATION (HYDRAULIC, LUBE, ENGINE)
TRANSFORMERS (DEGASSIFICATION)
LARGE COMPRESSORS
www.msis.org
Morris Sallick Industrial Supplies, Inc.
Contacts:
Morris Sallick Industrial Supplies, Inc. (MSIS)
Email: rodrigo@msis.org
Email: rodrigo@morrissallick.com
MSN Messenger: rodrigosallick@hotmail.com
Skype: rodsallick
Optica Nicaraguense 2 1/2 c. al este
Managua, Nicaragua
Tel: +505-2266-2011
Fax: +505-2266-0211
Mobile: +505-8722-5000 - (NEW NUMBER)
C/O Porter Industries
5220 NW 72nd Ave.
Bay 6 & 7
Miami, FL 33166
Tel: +1-305-480-5875
Fax: +1-305-480-5876
Mobile: +1-305-992-2745
Morris Sallick Industrial Supplies, Inc.
Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
Power Generation and Petroleum Industries