DATA SHEET
Aruba AP-175
Access Point
ARUBA AP-175 ACCESS POINT
The multifunction AP-175 is an affordable, fully hardened outdoor 802.11n
access point (AP) that provides maximum deployment flexibility in high-density
campuses, storage yards, warehouses, container/transportation facilities,
extreme industrial production areas and other harsh environments. The highperformance AP-175 delivers wire-like performance at data rates up to 300
Mbps per radio.
The AP-175 features two 2x2 MIMO dual-band 2.4-GHz/5-GHz radios with
quad antenna interfaces. Each radio is capable of providing a maximum
aggregate transmit power of up to 25dBm.
With wall and mast mounting options, the AP-175 is built to provide years of trouble-free operation.
Engineered to survive in harsh outdoor environments, the AP-175 withstands exposure to high and low temperatures,
persistent moisture and precipitation, and is fully sealed for protection from airborne contaminants. All electrical interfaces
include industrial-strength surge protection.
As an 802.11n AP, the AP-175 works with Aruba’s centralized Mobility Controllers to enable the use of wireless as a primary
connection with speed and reliability comparable to a wired LAN. It also increases performance by utilizing techniques such
as channel bonding, block acknowledgement and MIMO radios. Advanced antenna technology also increases range and
reliability.
The key to ensuring wire-like performance and reliability is Aruba’s unique Adaptive Radio Management (ARM) and spectrum
analysis* capabilities, which manage the 2.4-GHz and 5-GHz radio bands to mitigate RF interference and maximize Wi-Fi
client performance.
The multifunction AP-175 can be configured through the Aruba Mobility Controller to provide wireless LAN access with parttime air monitoring, dedicated air monitoring for wireless IPS and spectrum analysis, Remote AP (RAP) functionality or secure
enterprise mesh.
The AP-175 can operate either from standard 802.3at power-over-Ethernet (PoE+) sources (AP-175P model), a 100-240 volt
AC power source (AP-175AC model), or a 12-48 volt DC power supply or solar and plant bus power sources. The AC and DC
powered models provide an 802.3af POE power source (PSE) on the Ethernet interface.
APPLICATION
• 802.11n outdoor AP provides maximum deployment flexibility in
high-density campuses, storage yards, warehouses, container/
transportation facilities, extreme industrial production areas and other
harsh environments
OPERATING MODE
• 802.11a/b/g/n AP, air monitor (AM) and Remote AP (RAP)
• Spectrum monitor, AM and RAP
• AM and RAP
• RAP
• Secure enterprise mesh
RADIOS
• Software-configurable dual radio capable of supporting 2.4 GHz and 5
GHz
• 802.11n capable, implementing 2x2 MIMO with two spatial streams,
providing up to 300 Mbps data rate per radio
• Maximum (aggregate) transmit power per radio: 25dBm
RF MANAGEMENT
• Automatic transmit-power and channel-management control with
auto coverage-hole correction via Adaptive Radio Management
(ARM)
• Spectrum analysis* remotely scans the 2.4-GHz and 5-GHz radio
bands to identify sources of RF interference. This provides visibility
into non-802.11 RF interference sources and their effect on 802.11
channel quality.
ADVANCED FEATURES
• Integrated RAP, secure enterprise mesh point or portal, wireless
intrusion detection and prevention
POWER IN
• AP-175P: 48-volt DC 802.3at power over Ethernet (PoE+)
• AP-175AC: 100-240 volt AC from external AC power source
• AP-175DC: 12-48 volt DC from external DC power source
• Maximum power consumption: 18 watts (excludes power consumed
by any POE device connected to and powered by the AP-175AC or
AP-175DC)
POWER OUT
•The AC and DC powered models provide an 802.3af POE power
source (PSE) on the Ethernet interface.
WIRELESS RADIO SPECIFICATIONS
• AP type: Dual-radio, dual-band 802.11n outdoor
• Supported frequency bands (country-specific restrictions apply):
- 2.400 to 2.4835 GHz
- 5.150 to 5.250 GHz
- 5.250 to 5.350 GHz
- 5.470 to 5.725 GHz
- 5.725 to 5.850 GHz
• Available channels: Controller-managed, dependent upon configured
regulatory domain
ARUBA AP-175 ACCESS POINT
• Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n: Orthogonal frequency division multiplexing (OFDM)
- 802.11n: 2x2 MIMO with two spatial streams
• Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
• Transmit power: Configurable in increments of 0.5 dBm
• Maximum transmit power:
- 2.4 GHz: 25 dBm (limited by local regulatory requirements)
- 5 GHz: 25 dBm (limited by local regulatory requirements)
• Maximum ratio combining (MRC) for improved receiver performance
• Association rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: MCS0 - MCS15 (6.5 Mbps to 300 Mbps)
• 802.11n high-throughput (HT) support: HT 20/40
• 802.11n packet aggregation: A-MPDU, A-MSDU
REGULATORY
ANTENNA
• Quad, N-type female interfaces (2 x 2.4 GHz, 2 x 5
GHz) for external antenna support (supports MIMO)
• Feeder cable may be used for external antenna deployments
ORDERING INFORMATION
Part number
Description
AP-175P
Aruba 175 Outdoor Wireless Access Point,
802.11abgn, dual radio, external antennas,
PoE+ powered (802.3at). Includes mounting kit
and sun shield.
AP-175AC
Aruba 175 Outdoor Wireless Access Point,
802.11abgn, dual radio, external antennas, AC
powered (100-240Vac). Includes mounting kit,
sun shield and power cord.
AP-175DC
Aruba 175 Outdoor Wireless Access Point,
802.11abgn, dual radio, external antennas, DC
powered (12-48Vdc). Includes mounting kit, sun
shield and power cord.
PD-9001G-AC
Single Port 802 3at PoE Midspan Injector
AP-LAR-1
Aruba Outdoor Antenna Lightning Arrestor - N
Type Connector
AINS2KKIT-00
MSR2K installation kit
ACONGEUSB-00 USB console cable, 1.5m
AETHGEL05-00
5m shielded Ethernet cable with RJ-45
connectors
MOUNTING
• Wall or mast mounted using the mounting bracket supplied with the
unit; solar shield included
INTERFACES
• Network:
- 1 x 10/100/1000BASE-T Ethernet (RJ-45), auto-sensing link
speed and MDI/MDX
• Power:
- 1 x DC power connector (in AP-175DC model only)
- 1 x AC power connector (in AP-175AC model only)
• Antenna:
- 4 x N-Type female antenna interfaces
• Other:
- 1 x USB console interface
MECHANICAL
• Dimensions/weight (unit)
- 260 mm x 240 mm x 105 mm (10.2” x 9.4” x4.1”)
- 3.25 kg (7 lb)
• Dimensions/weight (shipping)
- 330 mm x 320 mm x 300 mm (12.9” x 12.6”x 11.8”)
- 7.5 kg (16.6 lb)
ENVIRONMENTAL
• Operating:
- Temperature: -30o C to 55o C (-22o F to 131o F)
- Relative humidity: 5% to 95% non-condensing
- Altitude: Up to 3,000 meters (9,850 feet)
• Storage and transportation temperature range
-40o C to 70o C (-40o F to 158o F)
• Weather rating: IP66
• Wind survivability: Up to 165 mph
• Shock and vibration: ETSI 300-19-2-4 spec T41.E class 4M3
• Transportation: ISTA 2A
•
•
•
•
•
•
•
•
•
FCC/Industry of Canada
R&TTE Directive 1995/5/EC
EN 300 328
EN 301 893
CB Scheme Safety, cTUVus
Korea KCC
Mexico NOM/COFETEL
IEC 60529 IP66, NEMA 4X
ATEX Zone 2
•
•
•
•
•
•
•
•
CE Marked
Low Voltage Directive 72/23/EEC
EN 301 489
UL/IEC/EN 60950
Japan MIC/VCCI
Brazil ANATEL
China SRRC/CCC
AS/NZS 4260, 4771, 3548
For more country-specific regulatory information, and approvals,
please see your Aruba representative.
CERTIFICATIONS
• Wi-Fi certified: 802.11a/b/g/n
WARRANTY
• 1 year parts/labor
ARUBA AP-175 ACCESS POINT
RF PERFORMANCE TABLE
Max TX power per
active TX chain
(dBm)
RX Sensitivity
(dBm)
Max TX power per
active TX chain
(dBm)
2.4 GHz
802.11b
1 Mbps
2 Mbps
5.5 Mbps
11 Mbps
802.11a/g
6 Mbps
9 Mbps
12 Mbps
18 Mbps
24 Mbps
36 Mbps
48 Mbps
54 Mbps
RX Sensitivity
(dBm)
5 GHz
20
20
20
20
-96
-96
-94
-93
20
20
20
20
19
18
17
17
-96
-96
-96
-95
-92
-89
-85
-83
22
22
22
22
22
20
19
18
-97
-96
-96
-94
-88
-86
-82
-80
22
22
22
22
21
20
19
18
22
22
22
22
21
20
19
18
-94
-93
-92
-89
-85
-81
-80
-78
-94
-93
-92
-89
-85
-81
-80
-78
21
20
19
18
17
16
15
15
21
20
19
18
17
16
15
15
-97
-94
-91
-87
-86
-81
-79
-77
-97
-94
-91
-87
-86
-81
-79
-77
21
21
21
20
19
18
18
17
21
21
21
20
19
18
18
17
-92
-91
-89
-86
-83
-79
-77
-75
-92
-91
-89
-86
-83
-79
-77
-75
19
19
18
17
16
15
14
14
19
19
18
17
16
15
14
14
-92
-90
-88
-85
-83
-79
-77
-73
-92
-90
-88
-85
-83
-79
-77
-73
802.11n HT20
MCS0
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
MCS8
MCS9
MCS10
MCS11
MCS12
MCS13
MCS14
MCS15
802.11n HT40
MCS0
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
MCS8
MCS9
MCS10
MCS11
MCS12
MCS13
MCS14
MCS15
Maximum capability of the hardware provided. Maximum transmit power will be limited by local regulatory settings.
WWW.ARUBANETWORKS.COM
| 1344 Crossman Avenue. Sunnyvale, CA 94089
1-866-55-ARUBA | Tel. +1 408.227.4500 | Fax. +1 408.227.4550 | info@arubanetworks.com
© 2010 Aruba Networks, Inc. AirWave®, Aruba Networks®, Aruba Mobility Management System®, Bluescanner, For Wireless That Works®, Mobile Edge Architecture®, People Move. Networks Must Follow®, The AllWireless Workplace Is Now Open For Business, RFprotect®, Green Island, and The Mobile Edge Company® are trademarks of Aruba Networks, Inc. All rights reserved. All other trademarks are the property of their respective owners. Aruba Networks reserves the right to change, modify, transfer, or otherwise revise this publication and the product specifications without notice. While Aruba uses commercially reasonable efforts to ensure the
accuracy of the specifications contained in this document, Aruba will assume no responsibility for any errors or omissions. Note: All scaling metrics outlined in this document are maximum supported values. The scale may
vary depending upon the deployment scenario and features enabled. DS_AP175_100925