Factory : Al Jurf Industrial Area, Ajman
Tel. : +971 6 7417931, Fax : +971 6 7417932, Email: alphacms@yahoo.com
Sales Office : P.O. Box 80955, Al Quoz, Third Interchange, Dubai.
Tel: 971 4 3307263, Fax: 971 4 3306242, Email: riaz@alphastartrading.ae
Abu Dhabi, UAE:
Near Alam Supermarket
Crown Burger Building
Mezzanine Floor - 3
P. O. Box 31737
Tel: 971 2 6586911
Fax: 971 2 6586910
Doha, Qatar:
Alpha Star Trading
Grand Hamad Street
Old Doha Bank Building, Opposite: Arab Bank
Floor No: 4 - Room No: 401
Post Box: 55741, Doha, Qatar
Tel: 44683982, Fax: 44580844
Chennai, India:
M/s Alpha Star Trading (P) Ltd.
#145 (old #77), Ground Floor
Perambur Barracks Road
Vepery, Chennai - 600 007
Telefax: +91 44 42822367
Email: fareed@alphastarindia.com
1.
About Us
1
2.
Technical Information
2.1 Terms and Definitions
2.2 Materials
2.3 Surface Finishing
2
5
7
3.
Alpha Cable Tray Systems
3.1 Straight Section
3.2 Accessories
3.3 Fittings
3.4 Selection of Cable Support System
3.5 Maximum Loading Capacities of Cable Trays
9
10
13
18
20
21
4.
Alpha Cable Trunking System
4.1 Straight Section
4.2 Accessories
4.3 Fittings
4.4 Flush Floor Trunking
4.5 Under Floor Trunking
23
24
26
31
32
33
Alpha Cable Ladder System
5.1 Straight Section
5.2 Accessories
5.3 Fittings
35
36
37
42
5.
6.
Alpha Cable Struts and Support Systems
6.1 Strut Channels
6.2 Strut Channel Brackets
6.3 Fasteners
43
44
46
54
7.
Certificates
56
8.
Major Projects
60
ABOUT US
CONTENTS
CONTENTS
Alpha Cable Management Systems LLC (Alpha CMS) is fully equipped with state-of-the-art
production facilities for manufacturing:
I.
II.
III.
IV.
CABLE TRAYS
CABLE TRUNKINGS
CABLE LADDERS
ALPHA CABLE STRUTS & SUPPORT SYSTEMS
Alpha CMS is the one of the leading manufacturers of cable support systems in the UAE.
We are specialized in the design and manufacturing of a wide range of cable support
systems. Our products are under the Quality System that complies with ISO 9001:2008 and
our cable support system also meets the required International standards such as
NEMA-VE1, BS EN 61537, BS 4678 Part 1, and BS EN 50085-1.
Our factory is located in Al Jurf Industrial Area, Ajman, UAE. The factory operating area
is more than 30,000 square feet and it is well equipped with the latest Semi Automatic and
Full Automatic machinery to achieve product quality of the highest international standards.
1
A pre-fabricated metal structure consisting of two longitudinal side rails connected by
individual transverse members.
Perforated Cable Tray
A pre-fabricated metal structure consisting of one-piece, provided with slot openings for
sufficient ventilation. It is generally used for moderate heat generating applications; the
reason for selecting a perforated cable tray is aesthetics and no drooping of small cable is
visible. It also provides more support than does the ladder type cable tray and the ventilation
holes could be used as install holes so that installation becomes more credible.
TERMS AND DEFINITIONS
TERMS AND DEFINITIONS
Ladder Type Cable Tray
Trough Cable Tray
A pre-fabricated metal structure greater than 100 mm in width consisting of a ventilated
bottom within integral or separate longitudinal side rails.
Channel Cable Tray
2.1 TERMS AND DEFINITIONS
Cable Tray System
Cable tray system is a unit or assembly of units or sections and associated fittings forming a
rigid structural system used to hold up the cables and also distributes the cables along the
specified path.
A pre-fabricated metal structure consisting of a one-piece ventilated bottom channel section
or solid bottom channel, or both, not exceeding 150 mm in width.
Accessories
Devices which are used to supplement the function of straight sections and fittings include
such items as Bends, Tee, Cross, Reducer, hold down devices and dividers.
Types of Cable Tray
Bends (90° Bend, 45° Bend)
1. Ladder Cable Tray
2. Perforated Cable Tray
3. Trough Cable Tray
4. Channel Cable Tray
A cable tray fitting which is suitable for routing the cable or joining the cable trays in 90° or
45° direction either in horizontal or vertical planes.
Tee
A cable tray fitting which is suitable for route the cable or joining the cable trays in a tee
configuration at 90° in same planes or different planes.
2
3
MATERIALS
TERMS AND DEFINITIONS
Cross
A cable tray fitting which is suitable for routing the cable or joining the cable trays in four
directions at 90° in same planes or different planes.
Reducer
A cable tray fitting which is suitable for joining cable trays of different widths in the same
plane.
➔ Straight Reducer
A straight reducer has two symmetrical offset sides.
➔ Right Reducer
When viewed from large end, it has a straight side on the right.
➔ Left Reducer
When viewed from large end, it has a straight side on the left.
2.2 Materials
Cable Tray Connector
It is used to join cable tray straight sections or accessories or both.
Types of connector
➔ Rigid
➔ Expansion
➔ Adjustable
➔ Reducer
Material selection is mainly based on the environment condition, installation consideration and
economic consideration.
I. Mild Steel
Mild steel is the most common used steel, providing good strength and wear resistance. It is
available very easily and is also very economical. Mild steel can be coated in many ways to
avoid corrosion. This accounts for 90% of cable trays manufactured anywhere in the world.
➔ Plain Steel
* Hot Rolled Steel Sheet
* Cold Rolled Steel Sheet
➔ Galvanized Steel (Continuously Pre-Galvanized Hot-Dip Zinc Coated Steel)
Advantages
• Low Thermal Expansion
• Limited Deflection
• Good Surface Finishing
• Electric Shielding
4
5
2.3 SURFACE FINISHING
Stainless steel is used in highly aggressive environments and industrial sites where there are
high levels of potent airborne pollution. The fire resistance of stainless steel is very high. It
is also ideal for use in environments where special hygiene requirements are required like
dairies, abattoirs, food industries and pharmaceutical factories.
➔ Pre-Galvanized Zinc
Advantages
• It withstands high temperatures
• Offers high corrosion resistance
III. Aluminium
Aluminium is a rust-free alternative to all other basic raw materials. It has a special
superficial coating of al2O3 to protect from rust. It can also take loads of up to 40kg/m with
a safety factor of 1.6. It can be used without any additional coating.
Advantages
• High corrosion resistance
• Excellent strength to weight ratio
• Easy to install
• Excellent grounding conductor
Pre-Galvanized steel is produced by coating coils of sheet steel with zinc by continuously
rolling the material through molten zinc bath at the mills. This is also known as Mill
Galvanized or Hot-Dip Mill Galvanized.
Due to Cathodic effect between Zinc and Iron elements the material plated by Pre
Galvanizing method will be protected against corrosion on cut surfaces during fabrication. It
is valid and effective up to 2mm thickness. Minimum coating thickness from this process is
12µm. Pre Galvanized cable trays are suitable for indoor use.
SURFACE FINISHING
MATERIALS
II. Stainless Steel
➔ Hot-Dip Galvanizing After Fabrication
Cable tray products are fabricated from steel and then completely immersed in a bath of
molten zinc. A metallic bond occurs resulting in a zinc coating that completely coats all
surfaces, including edges and welds.
The Layer of zinc which bonds to steel provides a dual protection against corrosion. It
protects first as an overall barrier coating. If this coating happens to be scratched or gouged,
zinc’s secondary defence is called upon to protect the steel by galvanic action. Minimum
coating thickness from this process is 45µm. Hot-dip Galvanizing cable trays are suitable for
both indoor and outdoor use.
Corrosion of zinc plated and unprotected steel in atmosphere
Atmosphere
Types
6
Wear out of zinc coating
(Micron/year)
Wear out unprotected steel
(Micron/year)
Open field
1.0 - 3.4
6 - 60
Sea side
2.4 - 15.0
20 - 170
City
1.0 - 6.0
30 - 70
Industry
3.8 - 19.0
30 - 160
Tropical climate
1.0 - 9.7
1 - 70
7
Powder coating is the process of coating a surface in which a powder material is applied
using an electrostatic or compressed air method. The applied powder is then heated to its
melting point, after which it flows to form a smooth film which dries to a firm, durable finish
very resistant to scratches, cracking, peeling, UV rays and rust.
A wide range of specialty effects is easily accomplished which would be impossible to
achieve with other coating processes. Minimum coating thickness from this process is 45µm.
Powder coated cable trays are more suitable for indoor use.
Surface Finishing
Code
Pre Galvanized
PG
Hot Dip Galvanized
HG
Powder Coating
PC
t
10
50
ALPHA CABLE TRAY SYSTEMS
SURFACE FINISHING
➔ Powder Coating
Width
(W)
CABLE TRAY SYSTEMS
1.
2.
3.
4.
5.
6.
7.
8
Cable Tray Straight section
Horizontal 90° Bend
Horizontal 45° Bend
Horizontal Tee Bend
Horizontal Cross Way
Reducer
Vertical Outside 90° Bend
8.
9.
10.
11.
12.
13.
Vertical Outside 45° Bend
Vertical Inside 45° Bend
Vertical Tee Bend
Coupler or Splice Plate or connector
Cable Tray Cover
Partition or Divider
9
LIGHT DUTY CABLE TRAYS
t
12
Width
(W)
t
12
(CTL SS wxt)
Width
(W)
Description
LIGHT DUTY CABLE TRAY (L-TYPE)
t
10
25
Weight
w (mm)
h (mm)
t (mm)
CTL SS 50x1
50
12
1
0.60
CTL SS 100x1
100
12
1
1.00
CTL SS 150x1
150
12
1
1.40
CTL SS 200x1.2
200
12
1.2
2.12
CTL SS 300x1.2
300
12
1.2
3.12
CTL SS 450x1.5
450
12
1.5
4.56
CTL SS 600x1.5
600
12
1.5
7.50
(Kg/M)
ALPHA CABLE TRAYS
ALPHA CABLE TRAYS STRAIGHT SECTION
STANDARD ALPHA CABLE TRAYS
MEDIUM DUTY CABLE TRAYS
Width
(W)
t
10
25
Width
(W)
MEDIUM DUTY CABLE TRAY (M-TYPE)
(CTM SS wxt)
Description
t
10
50
Width
(W)
HEAVY DUTY CABLE TRAY (H-TYPE)
10
Weight
w (mm)
h (mm)
t (mm)
CTM SS 50x1
50
25
1
1.04
CTM SS 100x1
100
25
1
1.44
CTM SS 150x1
150
25
1
1.84
CTM SS 200x1.2
200
25
1.2
2.68
CTM SS 300x1.2
300
25
1.2
3.65
CTM SS 450x1.2
450
25
1.2
5.08
CTM SS 600x1.5
600
25
1.5
8.16
CTM SS 750x2
750
25
2
13.28
CTM SS 900x2
900
25
2
15.68
(Kg/M)
11
900 BEND (CTH 90 wxt)
Description
w
t
10
50
w (mm) h (mm) t (mm)
CTH 90 50x1
50
50
1
CTH 90 100x1.2
100
50
1.2
CTH 90 150x1.2
150
50
1.2
CTH 90 200x1.5
200
50
1.5
CTH 90 300x1.5
300
50
1.5
CTH 90 450x1.5
450
50
1.5
CTH 90 600x2
600
50
2
CTH 90 750x2
750
50
2
CTH 90 900x2
900
50
2
90
Width
(W)
ALPHA CABLE TRAY ACCESSORIES
HEAVY DUTY CABLE TRAY ACCESSORIES
ALPHA CABLE TRAYS
HEAVY DUTY CABLE TRAYS
(CTH SS wxt)
450 BEND (CTH 45 wxt)
Description
12
Weight
w (mm)
h (mm)
t (mm)
CTH SS 50x1
50
50
1
1.44
CTH SS 100x1.2
100
50
1.2
2.21
CTH 45 50x1
50
50
1
CTH SS 150x1.2
150
50
1.2
2.69
CTH 45 100x1.2
100
50
1.2
CTH SS 200x1.5
200
50
1.5
3.69
CTH 45 150x1.2
150
50
1.2
CTH SS 300x1.5
300
50
1.5
5.16
CTH 45 200x1.5
200
50
1.5
CTH SS 450x1.5
450
50
1.5
6.96
CTH 45 300x1.5
300
50
1.5
CTH SS 600x2
600
50
2
11.68
CTH 45 450x1.5
450
50
1.5
CTH SS 750x2
750
50
2
14.08
CTH 45 600x2
600
50
2
CTH SS 900x2
900
50
2
16.5
CTH 45 750x2
750
50
2
CTH 45 900x2
900
50
2
(Kg/M)
Description
w
45
w (mm) h (mm) t (mm)
13
EQUAL TEE (CTH ET wxt)
Straight Section
900 INSIDE RAISER BEND (CTH RI90 wxt)
Width (mm)
Description
w1
w3
w2
h
t
(mm) (mm)
w1
w2
w3
CTH ET 50x1
50
50
50
50
1
CTH ET 100x1.2
100
100
100
50
1.2
CTH ET 150x1.2
150
150
150
50
1.2
CTH ET 200x1.5
200
200
200
50
1.5
CTH ET 300x1.5
300
300
300
50
1.5
CTH ET 450x1.5
450
450
450
50
1.5
CTH ET 600x2
600
600
600
50
2
CTH ET 750x2
750
750
750
50
2
CTH ET 900x2
900
900
900
50
2
Description
300mm RADIUS
w (mm) h (mm) t (mm)
CTH RI90 50x1.2
50
50
1.2
CTH RI90 100x1.2
100
50
1.2
CTH RI90 150x1.2
150
50
1.2
CTH RI90 200x1.5
200
50
1.5
CTH RI90 300x1.5
300
50
1.5
CTH RI90 450x1.5
450
50
1.5
CTH RI90 600x2
600
50
2
CTH RI90 750x2
750
50
2
CTH RI90 900x2
900
50
2
ALPHA CABLE TRAY ACCESSORIES
HEAVY DUTY CABLE TRAY ACCESSORIES
Branch
ALPHA CABLE TRAY ACCESSORIES
HEAVY DUTY CABLE TRAY ACCESSORIES
UNEQUAL TEE (CTH UET w1-w2-w3xt)
900 OUTSIDE RAISER BEND (CTH RO90 wxt)
EQUAL CROSS (CTH EC wxt)
Width (mm)
Description
w1
w4
w2
w3
14
h
t
(mm) (mm)
w1
w2
w3
w4
CTH EC 50x1
50
50
50
50
50
1
CTH RO90 50x1.2
50
50
1.2
CTH EC 100x1.2
100 100
100
100
50
1.2
CTH RO90 100x1.2
100
50
1.2
CTH EC 150x1.2
150 150
150
50
50
1.2
CTH RO90 150x1.2
150
50
1.2
CTH EC 200x1.5
200 200
200
200
50
1.5
CTH RO90 200x1.5
200
50
1.5
CTH EC 300x1.5
300 300
300
300
50
1.5
CTH RO90 300x1.5
300
50
1.5
CTH EC 450x1.5
450 450
450
450
50
1.5
CTH RO90 450x1.5
450
50
1.5
CTH EC 600x2
600 600
600
600
50
2
CTH RO90 600x2
600
50
2
CTH EC 750x2
750 750
750
750
50
2
CTH RO90 750x2
750
50
2
CTH EC 900x2
900 900
900
900
50
2
CTH RO90 900x2
900
50
2
Description
300mm RADIUS
w (mm) h (mm) t (mm)
UNEQUAL CROSS (CTH UEC w1-w2-w3-w4xt)
15
PROFILE TYPE CABLE TRAY ACCESSORIES
STRAIGHT REDUCER (CTH w1-w2xt)
w1
w2
Description
w1 (mm)
CTH SR 100-50x1.2
CTH SR 150-100x1.2
CTH SR 200-150x1.2
CTH SR 300-200x1.5
CTH SR 450-300x1.5
CTH SR 600-450x2
CTH SR 750-600x2
CTH SR 900-750x2
100
150
200
300
450
600
750
900
w2 (mm) h (mm) t (mm)
50
100
150
200
300
450
600
750
50
50
50
50
50
50
50
50
1.2
1.2
1.2
1.5
1.5
2
2
2
HORIZONTAL 900 BEND (CTR H90 wxt)
HORIZONTAL 450 BEND (CTR H45 wxt)
STRAIGHT REDUCER (CTR SR w1-w2xt)
RIGHT REDUCER (CTR RR w1-w2xt)
LEFT REDUCER (CTR LR w1-w2xt)
EQUAL CROSS (CTR EC wxt)
UNEQUAL CROSS (CTR UEC w1-w2-w3-w4xt)
EQUAL TEE (CTR ET wxt)
UNEQUAL TEE (CTR UET w1-w2-w3xt)
RIGHT REDUCER (CTH w1-w2xt)
w1
w2
Description
w1 (mm)
CTH RR 100-50x1.2
CTH RR 150-100x1.2
CTH RR 200-150x1.2
CTH RR 300-200x1.5
CTH RR 450-300x1.5
CTH RR 600-450x2
CTH RR 750-600x2
CTH RR 900-750x2
100
150
200
300
450
600
750
900
w2 (mm) h (mm) t (mm)
50
100
150
200
300
450
600
750
50
50
50
50
50
50
50
50
1.2
1.2
1.2
1.5
1.5
2
2
2
ALPHA CABLE TRAY ACCESSORIES
ALPHA CABLE TRAY ACCESSORIES
HEAVY DUTY CABLE TRAY ACCESSORIES
LEFT REDUCER (CTH w1-w2xt)
w1
w2
Description
w1 (mm)
CTH LR 100-50x1.2
CTH LR 150-100x1.2
CTH LR 200-150x1.2
CTH LR 300-200x1.5
CTH LR 450-300x1.5
CTH LR 600-450x2
CTH LR 750-600x2
CTH LR 900-750x2
100
150
200
300
450
600
750
900
w2 (mm) h (mm) t (mm)
50
100
150
200
300
450
600
750
50
50
50
50
50
50
50
50
1.2
1.2
1.2
1.5
1.5
2
2
2
HOW TO ORDER
Selection of Trays and Accessories, replace the letters shown in red with your choice from the following options.
Z:
w:
t:
F:
Duty / Type of Tray (L-Type, M-Type, H-Type)
Widths (50, 100, 150, 200, 300, 450, 600, 750, 900mm)
Thickness (1, 1.2, 1.5, 2mm)
Surface Finishing
PG (Pre-Galvanized)
HG (Hot Dip Galvanized)
PC (Powder Coating)
ORDER CODE
Description
Surface Finishing
CTZ H90wxt
F
CTH H90 300x1.5 HG
* Manufactured on request only
16
17
CABLE TRAY COVERS
SOLID FLANGE COVER (CT SC K wxt)
STRAIGHT CONNECTOR
(CTH SCN t)
WRAP OVER CONNECTOR
(CTH WOCN t)
LOUVERED FLANGE COVER (CT LC K wxt)
HORIZONTAL ADJUSTABLE CONNECTOR
(CTH HACN t)
VERTICAL ADJUSTABLE CONNECTOR
(CTH VACN t)
ALPHA CABLE TRAYS COVERS
ALPHA CABLE TRAY FITTINGS
HEAVY DUTY CABLE TRAY FITTINGS
PEAKED FLANGE COVER (CT DC K wxt)
Note:
Selection of Covers is by replacing the letters shown in red with your choice from the following options:
END CAP
(CTH ECP wxt)
18
FISH PLATE
(CTH FP wxt)
Cover Type
Solid Flange Cover
Louvered Flange Cover
Peaked Flange Cover
Code
SC
LC
DC
K: Item code (e.g., Straight Length (SS), Equal Tee (ET), etc)
w: Widths (50, 100, 150, 200, 300, 450, 600, 750, 900)
t: Thickness (0.7, 0.9, 1, 1.2, 1.5, 2)
19
(SUPPORT DISTANCE 1.5M)
CAPACITY OF CABLE TRAYS
SELECTION OF CABLE SUPPORT SYSTEM
MAXIMUM LOADING CAPACITIES OF CABLE TRAYS
Cable Trays Total Cross Section Area (mm2)
Cable Tray Height
(mm)
Cable Tray Width (mm)
20
50
100
150
200
300
450
600
750
900
12
600
1200
1800
2400
3600
5400
7200
-
-
25
1250
2500
3750
5000
7500
11250
15000
18750
22500
40
2000
4000
6000
8000
12000
18000
24000
30000
36000
50
2500
5000
750
10000
15000
22500
30000
37500
45000
75
-
7500
11250
15000
22500
33750
45000
56250
67500
100
-
10000
15000
20000
30000
45000
60000
75000
90000
21
ALPHA CABLE TRUNKINGS
CAPACITY OF CABLE TRAYS
MAXIMUM LOADING CAPACITIES OF CABLE TRAYS
(SUPPORT DISTANCE 1.5M)
Alpha CMS offers a wide range of Trunking Systems from normal cable trunkings to floor
distribution systems as per B.S. 4678 PART 1.
To enable smooth and easy turning of cables, all fittings are with integral coupler. Covers have quick
fix turn which makes locking and unlocking very simple. All fittings are made with single piece
wherever possible.
Raw Materials
a. Mild Steel
b. Stainless Steel
c. Aluminium
Surface Finishes
a. Hot Dip Galvanized Sheet (Pre Galvanized) as per BSEN 10142 & BSEN 10327
b. Hot Dip Galvanized After Fabrication as per BSEN ISO 1461
c. Powder Coated
22
23
SINGLE COMPARTMENT TRUNKING
(TR SS wxhxt)
TURN BUCKLE
Thickness (t)
HEIGHT (h)
WIDTH (w)
Standard lenght is 3 meter
MULTI COMPARTMENT TRUNKING
(TR SSC w(A-B-C)xhxt)
h
t
ALPHA CABLE TRUNKINGS
TRUNKING STRAIGHT SECTION
ALPHA CABLE TRUNKINGS
ALPHA STANDARD TRUNKING
Trunking with multi compartment available
in 2, 3, or 4 compartments
w
While ordering multi compartment trunking
divider spacing (A, B, C) should be
mentioned in the order
DIVIDER
HEIGHT (h)
50, 75 & 100mm with trunking also
available with 2 compartments
B
A
WIDTH (w)
Description
w (mm)
h (mm)
t (mm)
TR SS 50x50x1
50
50
1
TR SS 75x50x1.2
75
50
1.2
TR SS 75x75x1.2
75
75
1.2
TR SS 100x50x1.2
100
50
1.2
TR SS 100x75x1.2
100
75
1.2
TR SS 100x100x1.2
100
100
1.2
TR SS 150x50x1.2
150
50
1.2
TR SS 150x75x1.2
150
75
1.2
TR SS 150x100x1.2
150
100
1.2
TR SS 150x150x1.5
150
150
1.5
TR SS 200x100x1.5
200
100
1.5
2 COMPARTMENT TRUNKING
Normally divider strips are spot welded with
trunking body for site fixing loose divider
strips also available
HEIGHT (h)
A
B
C
WIDTH (w)
Coupler, Fittings and Fasteners should be
ordered separately
3 COMPARTMENT TRUNKING
24
25
Description
900 BEND COVER ON TOP
(TR 90CT wxhxt)
TR 90CT 50x50x1
TR 90CT 75x50x1.2
TR 90CT 75x75x1.2
TR 90CT 100x50x1.2
TR 90CT 100x75x1.2
TR 90CT 100x100x1.2
TR 90CT 150x50x1.2
TR 90CT 150x100x1.2
TR 90CT 150x150x1.5
TR 90CT 200x100x1.5
Description
900 BEND COVER ON INSIDE
(TR 90CI wxhxt)
TR 90CI 50x50x1
TR 90CI 75x50x1.2
TR 90CI 75x75x1.2
TR 90CI 100x50x1.2
TR 90CI 100x75x1.2
TR 90CI 100x100x1.2
TR 90CI 150x50x1.2
TR 90CI 150x100x1.2
TR 90CI 150x150x1.5
TR 90CI 200x100x1.5
Description
900 BEND COVER ON OUTSIDE
(TR 90CO wxhxt)
26
TR 90CO 50x50x1
TR 90CO 75x50x1.2
TR 90CO 75x75x1.2
TR 90CO 100x50x1.2
TR 90CO 100x75x1.2
TR 90CO 100x100x1.2
TR 90CO 150x50x1.2
TR 90CO 150x100x1.2
TR 90CO 150x150x1.5
TR 90CO 200x100x1.5
w (mm) h (mm) t (mm)
50
75
75
100
100
100
150
150
150
200
50
50
75
50
75
100
50
100
150
100
1
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
Description
450 BEND COVER ON TOP
(TR 45CT wxhxt)
w (mm) h (mm) t (mm)
50
75
75
100
100
100
150
150
150
200
50
50
75
50
75
100
50
100
150
100
1
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
Description
450 BEND COVER ON INSIDE
(TR 45CI wxhxt)
w (mm) h (mm) t (mm)
50
75
75
100
100
100
150
150
150
200
50
50
75
50
75
100
50
100
150
100
1
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
TR 45CT 50x50x1
TR 45CT 75x50x1.2
TR 45CT 75x75x1.2
TR 45CT 100x50x1.2
TR 45CT 100x75x1.2
TR 45CT 100x100x1.2
TR 45CT 150x50x1.2
TR 45CT 150x100x1.2
TR 45CT 150x150x1.5
TR 45CT 200x100x1.5
TR 45CI 50x50x1
TR 45CI 75x50x1.2
TR 45CI 75x75x1.2
TR 45CI 100x50x1.2
TR 45CI 100x75x1.2
TR 45CI 100x100x1.2
TR 45CI 150x50x1.2
TR 45CI 150x100x1.2
TR 45CI 150x150x1.5
TR 45CI 200x100x1.5
Description
450 BEND COVER ON OUTSIDE
(TR 45CO wxhxt)
TR 45CO 50x50x1
TR 45CO 75x50x1.2
TR 45CO 75x75x1.2
TR 45CO 100x50x1.2
TR 45CO 100x75x1.2
TR 45CO 100x100x1.2
TR 45CO 150x50x1.2
TR 45CO 150x100x1.2
TR 45CO 150x150x1.5
TR 45CO 200x100x1.5
w (mm) h (mm) t (mm)
50
75
75
100
100
100
150
150
150
200
50
50
75
50
75
100
50
100
150
100
1
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
w (mm) h (mm) t (mm)
50
75
75
100
100
100
150
150
150
200
50
50
75
50
75
100
50
100
150
100
ALPHA CABLE TRUNKING ACCESSORIES
ALPHA CABLE TRUNKING ACCESSORIES
TRUNKING ACCESSORIES
1
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
w (mm) h (mm) t (mm)
50
75
75
100
100
100
150
150
150
200
50
50
75
50
75
100
50
100
150
100
1
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
27
TEE COVER ON TOP
(TR TCT wxhxt)
TR TCT 50x50x1
TR TCT 75x50x1.2
TR TCT 75x75x1.2
TR TCT 100x50x1.2
TR TCT 100x75x1.2
TR TCT 100x100x1.2
TR TCT 150x50x1.2
TR TCT 150x100x1.2
TR TCT 150x150x1.5
TR TCT 200x100x1.5
Description
TEE COVER ON INSIDE
(TR TCI wxhxt)
TR TCI 50x50x1
TR TCI 75x50x1.2
TR TCI 75x75x1.2
TR TCI 100x50x1.2
TR TCI 100x75x1.2
TR TCI 100x100x1.2
TR TCI 150x50x1.2
TR TCI 150x100x1.2
TR TCI 150x150x1.5
TR TCI 200x100x1.5
Description
TEE COVER ON OUTSIDE
(TR TCO wxhxt)
28
TR TCO 50x50x1
TR TCO 75x50x1.2
TR TCO 75x75x1.2
TR TCO 100x50x1.2
TR TCO 100x75x1.2
TR TCO 100x100x1.2
TR TCO 150x50x1.2
TR TCO 150x100x1.2
TR TCO 150x150x1.5
TR TCO 200x100x1.5
w (mm) h (mm) t (mm)
50
75
75
100
100
100
150
150
150
200
50
50
75
50
75
100
50
100
150
100
1
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
Description
CROSS
(TR C wxhxt)
TR C 50x50x1
TR C 75x50x1.2
TR C 75x75x1.2
TR C 100x50x1.2
TR C 100x75x1.2
TR C 100x100x1.2
TR C 150x50x1.2
TR C 150x100x1.2
TR C 150x150x1.5
TR C 200x100x1.5
w (mm) h (mm) t (mm)
50
75
75
100
100
100
150
150
150
200
w (mm) h (mm) t (mm)
50
75
75
100
100
100
150
150
150
200
50
50
75
50
75
100
50
100
150
100
1
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
REDUCER
(TR R w1xh1-w2xh2xt)
BELL MOUTH
(TR BM w1xh1-w2xh2xt)
CHANGE FACE RIGHT
(TR FR wxhxt)
CHANGE FACE LEFT
(TR FL wxhxt)
50
50
75
50
75
100
50
100
150
100
1
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
ALPHA CABLE TRUNKING ACCESSORIES
ALPHA CABLE TRUNKING ACCESSORIES
Description
w (mm) h (mm) t (mm)
50
75
75
100
100
100
150
150
150
200
50
50
75
50
75
100
50
100
150
100
1
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
29
D: Offset Distance
VERTICAL OFFSET
(TR VO wxhxtxd)
D: Offset Distance
HORIZONTAL OFFSET
(TR HO wxhxtxd)
STRAIGHT CONNECTOR
(TR SCN hxt)
ANGLE CONNECTOR
(TR ACN hxt)
EXPANSION CONNECTOR
(TR ECN hxt)
END CAP
(TR EP wxhxt)
SUSPENSION HANGER
(TR SH wxhxt)
WALL FLANGE
(TR WF wxhxt)
ALPHA CABLE TRUNKING FITTINGS
D
D
ALPHA CABLE TRUNKING ACCESSORIES
TRUNKING FITTINGS
HOW TO ORDER
Selection of Trunking and Accessories, replace the letters shown in red with your choice from the following
options.
ORDER CODE
Description
TR SS wxhxt
Description
Surface Finishing
TR SS wxhxt
F
TR SS 100x100x1.2 PG
w:
h:
t:
F:
Trunking
Straight Section
Thickness
Height
Width
Widths (50, 75, 100, 150, 200mm)
Height (50, 75, 100, 150mm)
Thickness (1, 1.2, 1.5mm)
Surface Finishing
PG (Pre-Galvanized)
HG (Hot Dip Galvanized)
PC (Powder Coating)
Note:
1. Standard Length is 3 meters.
2. Please contact us for special thickness and special modules.
30
31
UNDER FLOOR TRUNKING
Top of the Trunking will be in flush with screed
height and the position of trunking and accessories
are pre-determined. It is used in power
telecommunication and data cables in a floor
system.
Under floor Trunking is used where the Trunking
top surface should be beneath surface of the floor.
It is used in power, telecommunication and data
cables in a floor system where the cable layout is
pre-determined
SINGLE COMPARTMENT
(TRFF SS wxhxt)
SINGLE COMPARTMENT
(TRUF SS wxhxt)
MULTI COMPARTMENT
(TRFF SSC w(A-B-C)xhxt)
MULTI COMPARTMENT
(TRUF SSC w(A-B-C)xhxt)
Trunking with multi compartment available in 2, 3
or 4 compartments.
UNDER FLOOR TRUNKING
FLUSH FLOOR TRUNKING
FLUSH FLOOR TRUNKING
Normally divider strips are spot welded with
trunking body for site fixing. Loose divider strips
also available.
While ordering multi compartment trunking
divider spacing (A, B, C) should be mentioned in
the order.
HORIZONTAL 900 BEND
(TRFF H90 wxhxt)
EQUAL CROSS
(TRFF EC wxhxt)
HORIZONTAL 900 BEND
(TRUF H90 wxhxt)
EQUAL CROSS
(TRUF EC wxhxt)
HOW TO ORDER
Selection of Trunking and Accessories, replace the letters shown in red with your choice from the following
options.
ORDER CODE
Description
1. Standard Length is 3 meters.
2. Material Specification
w:
h:
t:
F:
TRUF SS wxhxt
Widths (50, 75, 100, 150, 200, 300mm)
Height (50, 75, 100, 150mm)
Thickness (1.2, 1.5, 2mm)
Surface Finishing
PG (Pre-Galvanized)
HG (Hot Dip Galvanized)
PC (Powder Coating)
Surface Finishing
TRUF SS wxhxt
F
TRUF SS 300x50x1.5 PG
VERTICAL INSIDE 900 BEND
(TRFF V90 wxhxt)
32
Description
F: Surface Finishing
PG (Pre-Galvanized)
HG (Hot Dip Galvanized)
PC (Powder Coating)
Trunking
Type
Straight Section
Thickness
Height
Width
1. Standard Length is 3 meters
2. Please contact us for special thickness and special modules
w:
Widths (50, 75, 100, 150, 200, 300mm)
h:
Height (50, 75, 100, 150mm)
t:
Thickness (1.2, 1.5, 2mm)
FF:
Flush Floor UF: Under Floor
33
ALPHA CABLE LADDERS
ALPHA CABLE EARTH LINK
Earth Link for Cable Tray, Trunking and Cable Ladders
Diameter
0/ 6/8
Alpha CMS cable ladders are manufactured to simplify the process of installation of cable from
point to point, considering the cable loads and all kinds of practical site problems. It comes in a
standard size of 3m and could be made in custom sizes on request.
Types
Material:tinned
copper braid and is
crinped at each end
a. Standard Cable Ladder (S Type)
b. Profile Cable Ladder (P Type)
c. Profile Cable Ladder (C Type)
Surface Finishes
a. Hot Dip Galvanized Sheet (Pre Galvanized) as per BSEN 10142 & BSEN 10327
b. Hot Dip Galvanized after fabrication as per BSEN ISO 1461
c. Powder Coated
Material:
Tinned copper play
Standard widths available in Cable Ladder
Length (L)
Width in mm
100
150
200
300
450
600
750
900
1000
Side heights available 50, 75, 100, 125, 150mm
34
35
CABLE LADDER ACCESSORIES
Description
Radius:300
STANDARD CABLE LADDER (S-TYPE)
90 BEND
(CLZ 90wxh)
0
CL 90 100x100
100
100
2
CL 90 150x100
150
100
2
CL 90 200x100
200
100
2
CL 90 300x100
300
100
2
CL 90 450x100
450
100
2
CL 90 600x100
600
100
2
CL 90 750x100
750
100
2
CL 90 900x100
900
100
2
Description
Radius:300
90 OUTSIDE RAISER BEND
(CLZ RO90wxh)
0
PROFILE CABLE LADDER (P-TYPE)
90 INSIDE RAISER BEND
(CLZ RI90wxh)
0
PROFILE CABLE LADDER (C-TYPE)
36
w (mm) h (mm) t (mm)
CL RO90 100x100
100
100
2
CL RO90 150x100
150
100
2
CL RO90 200x100
200
100
2
CL RO90 300x100
300
100
2
CL RO90 450x100
450
100
2
CL RO90 600x100
600
100
2
CL RO90 750x100
750
100
2
CL RO90 900x100
900
100
2
Description
Radius:300
w (mm) h (mm) t (mm)
ALPHA CABLE LADDER ACCESSORIES
ALPHA CABLE LADDERS
ALPHA CABLE LADDERS
w (mm) h (mm) t (mm)
CL RI90 100x100
100
100
2
CL RI90 150x100
150
100
2
CL RI90 200x100
200
100
2
CL RI90 300x100
300
100
2
CL RI90 450x100
450
100
2
CL RI90 600x100
600
100
2
CL RI90 750x100
750
100
2
CL RI90 900x100
900
100
2
37
h
(mm)
t
(mm)
Description
w1
(mm)
w2
(mm)
h
(mm)
t
(mm)
CL 45 100x100
100
100
2
CL SR 100-50x100
100
50
100
2
CL 45 150x100
150
100
2
CL SR 150-100x100
150
100
100
2
CL 45 200x100
200
100
2
CL SR 200-150x100
200
150
100
2
CL 45 300x100
300
100
2
CL SR 300-200x100
300
200
100
2
CL 45 450x100
450
100
2
CL SR 450-300x100
450
300
100
2
CL 45 600x100
600
100
2
CL SR 600-450x100
600
450
100
2
CL 45 750x100
750
100
2
CL SR 750-600x100
750
600
100
2
CL 45 900x100
900
100
2
CL SR 900-750x100
900
750
100
2
Description
w
(mm)
h
(mm)
t
(mm)
Description
w1
(mm)
w2
(mm)
h
(mm)
t
(mm)
CL RO45 100x100
100
100
2
CL RR 100-50x100
100
50
100
2
CL RO45 150x100
150
100
2
CL RR 150-100x100
150
100
100
2
CL RO45 200x100
200
100
2
CL RR 200-150x100
200
150
100
2
CL RO45 300x100
300
100
2
CL RR 300-200x100
300
200
100
2
CL RO45 450x100
450
100
2
CL RR 450-300x100
450
300
100
2
CL RO45 600x100
600
100
2
CL RR 600-450x100
600
450
100
2
CL RO45 750x100
750
100
2
CL RR 750-600x100
750
600
100
2
45 OUTSIDE RAISER BEND
(CLZ RO45wxh)
CL RO45 900x100
900
100
2
CL RR 900-750x100
900
750
100
2
Description
w
(mm)
h
(mm)
t
(mm)
Description
w1
(mm)
w2
(mm)
h
(mm)
t
(mm)
CL RI45 100x100
100
100
2
CL LR 100-50x100
100
50
100
2
CL RI45 150x100
150
100
2
CL LR 150-100x100
150
100
100
2
CL RI45 200x100
200
100
2
CL LR 200-150x100
200
150
100
2
CL RI45 300x100
300
100
2
CL LR 300-200x100
300
200
100
2
CL RI45 450x100
450
100
2
CL LR 450-300x100
450
300
100
2
CL RI45 600x100
600
100
2
CL LR 600-450x100
600
450
100
2
CL RI45 750x100
750
100
2
45 INSIDE RAISER BEND
(CLZ RI45wxh)
0
CL LR 750-600x100
750
600
100
2
CL RI45 900x100
900
100
2
CL LR 900-750x100
900
750
100
2
STRAIGHT REDUCER
(CLZ SRw1-w2xh)
RIGHT REDUCER
(CLZ RRw1-w2xh)
LEFT REDUCER
(CLZ LRw1-w2xh)
ALPHA CABLE LADDER ACCESSORIES
ALPHA CABLE LADDER ACCESSORIES
45 BEND
(CLZ 45wxh)
0
0
38
w
(mm)
Description
39
w
(mm)
h
(mm)
t
(mm)
CL ET 100x100
100
100
2
CL UEC 100-150-100-150x100
100 150 100 150
100
2
CL ET 150x100
150
100
2
CL UEC 150-100-150-100x100
150 100 150 100
100
2
CL ET 200x100
200
100
2
CL UEC 200-150-200-150x100
200 150 200 150
100
2
CL ET 300x100
300
100
2
CL UEC 300-200-300-200x100
300 200 300 200
100
2
CL ET 450x100
450
100
2
CL UEC 450-300-450-300x100
450 300 450 300
100
2
CL ET 600x100
600
100
2
CL UEC 600-450-600-450x100
600 450 600 450
100
2
CL ET 750x100
750
100
2
CL UEC 750-600-750-600x100
750 600 750 600
100
2
CL ET 900x100
900
100
2
CL UEC 900-750-900-750x100
900 750 900 750
100
2
Description
UNEQUAL TEE
(CLZ UETw1-w2-w3xh)
EQUAL CROSS
(CLZ UECwxh)
40
UNEQUAL CROSS
(CLZ UECw1-w2-w3-w4xh)
Width (mm)
h
t
w1 w2 w3 (mm) (mm)
CL UET 100-150-100x100 100 150 100 100
2
CL UET 150-100-150x100 150 100 150 100
2
CL UET 200-150-200x100 200 150 200 100
2
CL UET 300-200-300x100 300 200 300 100
2
CL UET 450-300-450x100 450 300 450 100
2
CL UET 600-450-600x100 600 450 600 100
2
CL UET 750-600-750x100 750 600 750 100
2
CL UET 900-750-900x100 900 750 900 100
2
w
(mm)
h
(mm)
t
(mm)
CL EC 100x100
100
100
2
CL EC 150x100
150
100
2
CL EC 200x100
200
100
2
CL EC 300x100
300
100
2
CL EC 450x100
450
100
2
CL EC 600x100
600
100
2
CL EC 750x100
750
100
2
CL EC 900x100
900
100
2
Description
Description
ALPHA CABLE LADDER ACCESSORIES
ALPHA CABLE LADDER ACCESSORIES
EQUAL TEE
(CLZ ET wxh)
Width (mm)
h
t
w1 w2 w3 w4 (mm) (mm)
Description
HOW TO ORDER
Selection of Cable Ladder and Accessories, replace the letters shown in red with your choice from the
following options:
ORDER CODE
Description
CLZ SS wxh
Description
Surface Finishing
CLZ SS wxh
F
CLS SS 600x100 HG
Z:
w:
h:
F:
Cable Ladder
Cable Ladder Type
Height
Width
Straight Section
Type of Ladder (S-Type, P-Type, C-Type)
Width (100, 150, 200, 300, 450, 600, 750, 900, 1000mm)
Height (50, 75, 100, 125, 150mm)
Surface Finishing
PG (Pre-Galvanized)
HG (Hot Dip Galvanized)
PC (Powder Coating)
Note:
1. Standard Length is 3 meters
2. Standard thickness is 2mm. For different thickness please mention in the order code with thickness (t)
eg: CLZ SSwxhxt
41
STRAIGHT CONNECTOR
(CL SCNhxt)
HORIZONTAL ADJUSTABLE CONNECTOR
(CL HACNhxt)
ANGLE CONNECTOR
(CL ACNhxt)
VERTICAL CONNECTOR
(CL VACNhxt)
HOLD DOWN CLAMP
(CL HDChxt)
RAISED HOLD DOWN CLAMP
(CL RHDChxt)
ALPHA CABLE STRUTS
ALPHA CABLE LADDER FITTINGS
42
CABLE LADDER FITTINGS
43
STRUT CHANNEL
41 x 41
* Thickness (t) available in 2mm & 2.5mm
PLAIN CHANNEL
41x41 (ST P 41x41xt)
ALPHA CABLE STRUT CHANNELS
ALPHA CABLE STRUT CHANNELS
ALPHA CABLE STRUT CHANNELS
STRUT CHANNEL
41 x 21
PLAIN BACK TO BACK CHANNEL
41x41 (ST PB 41x41xt)
PLAIN BACK TO BACK CHANNEL
41x21 (ST PB 41x21xt)
SLOTTED BACK TO BACK CHANNEL
41 x 41 (ST SB 41x41xt)
SLOTTED BACK TO BACK CHANNEL
41 x 21 (ST SB 41x21xt)
*Standard length is 3 meters
PLAIN CHANNEL
41x21 (ST P 41x21xt)
HOW TO ORDER
Selection of Struts Channels and Fittings, replace the letters shown in red with your choice from the following options:
Standard Length is 3meters for non standard length, please mention in your orders.
ORDER CODE
Z: Type of Channels (P-Plain, S-Slotted, PB-Plain Channel Back)
to Back, SB-Slotted Channel back to Back
Description
Surface Finishing
SC Z 41xhxt
F
h: Height (21, 41mm)
t: Thickness (2, 2.5mm)
F: Surface Finishing
PG (Pre-Galvanized)
HG (Hot Dip Galvanized)
PC (Powder Coating)
SC Z 41x41x2 HG
* Standard Length is 3meters for non standard length please mention in your orders.
SLOTTED CHANNEL
41 x 41 (ST S 41x41xt)
44
SLOTTED CHANNEL
41 x 21 (ST S 41x21xt)
45
CHANNEL RIGHT HAND SUPPORT BRACKET (A100 R)
CHANNEL LEFT HAND SUPPORT BRACKET (A100 L)
CHANNEL RIGHT HAND SUPPORT BRACKET (A101 R)
CHANNEL LEFT HAND SUPPORT BRACKET (A101 L)
RIGHT ANGLE BRACKET (A108)
RIGHT ANGLE BRACKET (A109)
THREE WAY CORNER BRACKET (A102)
THREE WAY CORNER BRACKET (A103)
RIGHT ANGLE BRACKET (A110)
RIGHT ANGLE BRACKET (A111)
THREE WAY CORNER BRACKET (A104)
THREE WAY CORNER BRACKET (A105)
Z-TYPE CHANNEL HOLDING BRACKET (A112)
Z-TYPE CHANNEL HOLDING BRACKET (A113)
FOUR WAY CORNER BRACKET (A106)
FOUR WAY CORNER BRACKET (A107)
Z-TYPE CHANNEL HOLDING BRACKET (A114)
Z-TYPE CHANNEL HOLDING BRACKET (A115)
ALPHA CABLE STRUT CHANNEL BRACKETS
ALPHA CABLE STRUT CHANNEL BRACKETS
46
ALPHA CABLE STRUT CHANNEL BRACKETS
47
Z-TYPE CHANNEL HOLDING BRACKET (A117)
CHANNEL SUPPORT BRACKET (A124)
CHANNEL SUPPORT BRACKET (A125)
U-TYPE CHANNEL HOLDING BRACKET (A118)
U-TYPE CHANNEL HOLDING BRACKET (A119)
CHANNEL SUPPORT BRACKET (LEFT HAND) (A126)
CHANNEL SUPPORT BRACKET (RIGHT HAND) (A127)
U-TYPE CHANNEL HOLDING BRACKET (A120)
U-TYPE CHANNEL HOLDING BRACKET (A121)
CHANNEL SUPPORT BRACKET (LEFT HAND) (A128)
CHANNEL SUPPORT BRACKET (RIGHT HAND) (A129)
U-TYPE CHANNEL HOLDING BRACKET (A122)
U-TYPE CHANNEL HOLDING BRACKET (A123)
CHANNEL SUPPORT BRACKET (A130)
CHANNEL SUPPORT BRACKET (A131)
ALPHA CABLE STRUT CHANNEL BRACKETS
ALPHA CABLE STRUT CHANNEL BRACKETS
48
Z-TYPE CHANNEL HOLDING BRACKET (A116)
49
CHANNEL SUPPORT BRACKET (RIGHT HAND) (A133)
CHANNEL INTERNAL CONNECTOR (A140)
CHANNEL SUPPORT ANGLE BRACKET (A141)
CHANNEL SUPPORT BRACKET (A134)
CHANNEL SUPPORT BRACKET (A135)
CHANNEL SUPPORT ANGLE BRACKET (A142)
CHANNEL SUPPORT ANGLE BRACKET (A143)
CHANNEL EXTERNAL CONNECTOR (A136)
CHANNEL EXTERNAL CONNECTOR (A137)
BASE PLATE FOR SINGLE CHANNEL (A144)
BASE PLATE FOR SINGLE CHANNEL (A145)
CHANNEL EXTERNAL CONNECTOR (A138)
CHANNEL EXTERNAL CONNECTOR (A139)
BASE PLATE FOR SINGLE CHANNEL (A146)
BASE PLATE FOR SINGLE CHANNEL (A147)
ALPHA CABLE STRUT CHANNEL BRACKETS
ALPHA CABLE STRUT CHANNEL BRACKETS
CHANNEL SUPPORT BRACKET (LEFT HAND) (A132)
X0 As per customer requirement
50
51
Description
Plain
BASE PLATE FOR DOUBLE CHANNEL (A148)
BASE PLATE FOR DOUBLE CHANNEL (A149)
Description
CANTILEVER ARM (SINGLE)
Slotted
CAH P 41x100x2
CAH P 41x150x2
CAH P 41x200x2
CAH P 41x300x2
CAH P 41x450x2
CAH P 41x100x2.5
CAH P 41x150x2.5
CAH P 41x200x2.5
CAH P 41x300x2.5
CAH P 41x450x2.5
CAH S 41x100x2
CAH S 41x150x2
CAH S 41x200x2
CAH S 41x300x2
CAH S 41x450x2
CAH S 41x100x2.5
CAH S 41x150x2.5
CAH S 41x200x2.5
CAH S 41x300x2.5
CAH S 41x450x2.5
Description
Plain
CANTILEVER ARM (BACK TO BACK)
Slotted
CAH PB 21x100x2
CAH PB 21x150x2
CAH PB 21x200x2
CAH PB 21x300x2
CAH PB 21x450x2
CAH PB 21x600x2
CAH PB 21x750x2
CAH PB 21x900x2
CAH PB 21x100x2.5
CAH PB 21x150x2.5
CAH PB 21x200x2.5
CAH PB 21x300x2.5
CAH PB 21x450x2.5
CAH PB 21x600x2.5
CAH PB 21x750x2.5
CAH PB 21x900x2.5
CAH SB 21x100x2
CAH SB 21x150x2
CAH SB 21x200x2
CAH SB 21x300x2
CAH SB 21x450x2
CAH SB 21x600x2
CAH SB 21x750x2
CAH SB 21x900x2
CAH SB 21x100x2.5
CAH SB 21x150x2.5
CAH SB 21x200x2.5
CAH SB 21x300x2.5
CAH SB 21x450x2.5
CAH SB 21x600x2.5
CAH SB 21x750x2.5
CAH SB 21x900x2.5
Description
Plain
CANTILEVER ARM (BACK TO BACK)
CAH PB 41x100x2
CAH PB 41x150x2
CAH PB 41x200x2
CAH PB 41x300x2
CAH PB 41x450x2
CAH PB 41x600x2
CAH PB 41x750x2
CAH PB 41x900x2
CAH PB 41x100x2.5
CAH PB 41x150x2.5
CAH PB 41x200x2.5
CAH PB 41x300x2.5
CAH PB 41x450x2.5
CAH PB 41x600x2.5
CAH PB 41x750x2.5
CAH PB 41x900x2.5
Slotted
CAH SB 41x100x2
CAH SB 41x150x2
CAH SB 41x200x2
CAH SB 41x300x2
CAH SB 41x450x2
CAH SB 41x600x2
CAH SB 41x750x2
CAH SB 41x900x2
CAH SB 41x100x2.5
CAH SB 41x150x2.5
CAH SB 41x200x2.5
CAH SB 41x300x2.5
CAH SB 41x450x2.5
CAH SB 41x600x2.5
CAH SB 41x750x2.5
CAH SB 41x900x2.5
Z: Type of Channels (P-Plain, S-Slotted, PB-Plain Channel Back to Back, SB-Slotted Channel Back to Back)
52
CAV P 41x100x2
CAV P 41x150x2
CAV P 41x200x2
CAV P 41x300x2
CAV P 41x450x2
CAV P 41x600x2
CAV P 41x750x2
CAV P 41x900x2
CAV P 41x100x2.5
CAV P 41x150x2.5
CAV P 41x200x2.5
CAV P 41x300x2.5
CAV P 41x450x2.5
CAV P 41x600x2.5
CAV P 41x750x2.5
CAV P 41x900x2.5
CANTILEVER ARM (CAH Z hxlxt)
Plain
Length Thickness
(mm)
(mm)
100
150
200
300
450
100
150
200
300
450
Slotted
2
2.5
CAV S 41x100x2
CAV S 41x150x2
CAV S 41x200x2
CAV S 41x300x2
CAV S 41x450x2
CAV S 41x600x2
CAV S 41x750x2
CAV S 41x900x2
CAV S 41x100x2.5
CAV S 41x150x2.5
CAV S 41x200x2.5
CAV S 41x300x2.5
CAV S 41x450x2.5
CAV S 41x600x2.5
CAV S 41x750x2.5
CAV S 41x900x2.5
Length Thickness
(mm)
(mm)
100
150
200
300
450
600
750
900
100
150
200
300
450
600
750
900
2
2.5
VERTICAL ARM (SINGLE)
ALPHA CABLE STRUT CHANNEL BRACKETS
ALPHA CABLE STRUT CHANNEL BRACKETS
VERTICAL ARM (CAV Z hxlxt)
Length Thickness
(mm)
(mm)
100
150
200
300
450
600
750
900
100
150
200
300
450
600
750
900
Description
Plain
2
2.5
Length Thickness
(mm)
(mm)
100
150
200
300
450
600
750
900
100
150
200
300
450
600
750
900
2
2.5
VERTICAL ARM (BACK TO BACK)
CAV PB 21x100x2
CAV PB 21x150x2
CAV PB 21x200x2
CAV PB 21x300x2
CAV PB 21x450x2
CAV PB 21x600x2
CAV PB 21x750x2
CAV PB 21x900x2
CAV PB 21x100x2.5
CAV PB 21x150x2.5
CAV PB 21x200x2.5
CAV PB 21x300x2.5
CAV PB 21x450x2.5
CAV PB 21x600x2.5
CAV PB 21x750x2.5
CAV PB 21x900x2.5
CAV PB 41x100x2
CAV PB 41x150x2
CAV PB 41x200x2
CAV PB 41x300x2
CAV PB 41x450x2
CAV PB 41x600x2
CAV PB 41x750x2
CAV PB 41x900x2
CAV PB 41x100x2.5
CAV PB 41x150x2.5
CAV PB 41x200x2.5
CAV PB 41x300x2.5
CAV PB 41x450x2.5
CAV PB 41x600x2.5
CAV PB 41x750x2.5
CAV PB 41x900x2.5
Slotted
CAV SB 21x100x2
CAV SB 21x150x2
CAV SB 21x200x2
CAV SB 21x300x2
CAV SB 21x450x2
CAV SB 21x600x2
CAV SB 21x750x2
CAV SB 21x900x2
CAV SB 21x100x2.5
CAV SB 21x150x2.5
CAV SB 21x200x2.5
CAV SB 21x300x2.5
CAV SB 21x450x2.5
CAV SB 21x600x2.5
CAV SB 21x750x2.5
CAV SB 21x900x2.5
CAV SB 41x100x2
CAV SB 41x150x2
CAV SB 41x200x2
CAV SB 41x300x2
CAV SB 41x450x2
CAV SB 41x600x2
CAV SB 41x750x2
CAV SB 41x900x2
CAV SB 41x100x2.5
CAV SB 41x150x2.5
CAV SB 41x200x2.5
CAV SB 41x300x2.5
CAV SB 41x450x2.5
CAV SB 41x600x2.5
CAV SB 41x750x2.5
CAV SB 41x900x2.5
Length Thickness
(mm)
(mm)
100
150
200
300
450
600
750
900
100
150
200
300
450
600
750
900
100
150
200
300
450
600
750
900
100
150
200
300
450
600
750
900
2
2.5
2
2.5
Z: Type of Channels (P-Plain, S-Slotted, PB-Plain Channel Back to Back, SB-Slotted Channel Back to Back)
53
Short Spring
FASTENERS
Part No
F SNS M6
F SNS M8
F SNS M10
F SNS M12
Size
M6
M8
M10
M12
Part No
F AS M6X70
F AS M8X80
F AS M10X75
F AS M10X90
F AS M10X115
F AS M12X105
F AS M12X140
F AS M16X150
F AS M16X180
Long Spring
Part No
F SNL M6
F SNL M8
F SNL M10
F SNL M12
Size
M6
M8
M10
M12
Shield Anchor
Part No
Pan Head Screw
Hexagonal Head Bolts
Length
Part No
Size
(mm)
F HB M6x12
F HB M6x20
F HB M6x25
F HB M8x16
F HB M8x20
F HB M8x25
F HB M8x30
F HB M8x35
F HB M8x40
F HB M10x20
F HB M10x25
F HB M10x30
F HB M10x35
F HB M10x40
F HB M10x50
F HB M12x20
F HB M12x25
F HB M12x30
F HB M12x35
F HB M12x40
F HB M12x50
54
M6
M6
M6
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M12
M12
M12
M12
M12
M12
16
20
25
16
20
25
30
35
40
20
25
30
35
40
50
20
25
30
35
40
50
Part No
Size
F PH M5x10
F PH M6x12
F PH M6x16
F PH M6x20
F PH M6x25
F PH M6x30
F PH M6x40
F PH M6x50
M5
M6
M6
M6
M6
M6
M6
M6
Length
(mm)
10
12
16
20
25
30
40
50
Hexagonal Nut
Part No
Size
F HN M6
M6
F HN M8
M8
F HN M10
M10
F HN M12
M12
F AT M6X65
F AT M6X100
F AT M8X75
F AT M8X115
F AT M10X90
F AT M10X120
F AT M12X110
F AT M12X150
F AT M12X180
F AT M16X145
F AT M16X220
Stud Anchor
Anchor Size
Drill Hole Size
Dia Length Dia Min. Depth
Metric mm mm
mm
M6
70
12
55
M8
80
14
65
75
M10
90
16
85
115
M12
105
20
105
140
M16
150
25
145
180
FASTENERS
STRUT CHANNEL SPRING NUT
Anchor Size
Drill Hole Size
Dia Length Dia Min. Depth
Metric mm mm
mm
65
M6
6
55
100
75
M8
8
65
115
90
M10
10
70
120
110
M12
150
12
95
180
145
M16
16
115
220
Anchor Size
Drill Hole Size
Dia Length Dia Min. Depth
Metric mm mm
mm
F AD M6X25
M6
25
8
28
F AD M8X30
M8
30
10
33
F AD M10X40 M10
40
12
43
F AD M12X50 M12
50
15
55
F AD M16X65 M16
65
20
68
Part No
(CAH Z hxlxt)
Flat Washer
Part No
Size
F FW M6
M6
F FW M8
M8
F FW M10
M10
F FW M12
M12
Drop In Anchor
HOW TO ORDER
Selection of Trunking, Tray and Ladder. Replace the letters shown in red with your choice fromthe following options.
PART NO.
F Z MxL
ORDER CODE
Threaded Rod
Part No
Size
F TR M6
F TR M8
F TR M10
F TR M12
M6
M8
M10
M12
Length
(mm)
2000
2000
2000
2000
Spring Washer
Part No
Size
F SW M6
M6
F SW M8
M8
F SW M10
M10
F SW M12
M12
Description
FZMxL
Fasteners
Type
Surface Finishing
F
F PH M5x10 EG
Length
Size (Metric)
F: Material Finishing
EG (Electroplated Zinc Coating)
HG (Hot Dip Galvanised)
SS (Stainless Steel)
Z: Type (SNS, SNL, HB, HN, FW,
SW, PH, TR, AS, AT, AD
M: Size (M6, M8, M10, M12, M16)
L: Length (10, 16, 20, 25, 30, 40, 50, 65, 70, 75,
90, 100, 105, 115, 120, 140, 145, 150, 180, 220mm)
*Please contact us for special Type of Fasteners and Size.
55
56
57
CERTIFICATES
CERTIFICATES
58
59
CERTIFICATES
CERTIFICATES
FACTORY INFRASTRUCTURE
OUR PROJECTS
Major Projects supplied
Some of our major projects are:
• Dubai Metro, Dubai.
• Barwa Commercial, Doha.
• Fujairah Commercial Complex, Fujairah.
• Presidential Flight State Guest Reception Terminal, Abu Dhabi.
• Department of Presidential Affairs, Abu Dhabi.
• Jumeirah Park, Dubai.
• Jafza Convention Centre, Dubai.
• Al Ghurair City Expansion, Dubai.
• Ruwais Palace Construction, Abu Dhabi.
• Burj Al Salam, Dubai.
• Cleveland Clinic, Abu Dhabi.
Rolling Machine
CNC Press Preake Machine
GOVERNMENT APPROVALS & CERTIFICATES
•
•
•
•
•
ISO 9001:2008 (Quality Management Systems)
ADWEA (Abu Dhabi Water & Electricity Authority)
SEWA (Sharjah Electricity & Water Authority)
FEWA (Federal Electricity & Water Authority)
Ministry of Public Works
NC Shearing Machine
Power Press
60
3150 KN Prower Press
Factory : Al Jurf Industrial Area, Ajman
Tel. : +971 6 7417931, Fax : +971 6 7417932, Email: alphacms@yahoo.com
Sales Office : P.O. Box 80955, Al Quoz, Third Interchange, Dubai.
Tel: 971 4 3307263, Fax: 971 4 3306242, Email: riaz@alphastartrading.ae
Abu Dhabi, UAE:
Near Alam Supermarket
Crown Burger Building
Mezzanine Floor - 3
P. O. Box 31737
Tel: 971 2 6586911
Fax: 971 2 6586910
Doha, Qatar:
Alpha Star Trading
Grand Hamad Street
Old Doha Bank Building, Opposite: Arab Bank
Floor No: 4 - Room No: 401
Post Box: 55741, Doha, Qatar
Tel: 44683982, Fax: 44580844
Chennai, India:
M/s Alpha Star Trading (P) Ltd.
#145 (old #77), Ground Floor
Perambur Barracks Road
Vepery, Chennai - 600 007
Telefax: +91 44 42822367
Email: fareed@alphastarindia.com