3M Electrical
Global Capability. Local Back Up.
2010
PowerIndustry
Solutions
Contents
Contents
3M™Cold Shrink
8
3M™Scotch Aerosols,
Joints & Termination
34
3M™
Separable Connectors
14
36
3M™Scotchflex
Cable Ties
3M™Cold Shrink
3M™ Cable &
End Caps & Cable Abandonement Kits
18
38
3M™Heat Shrink
20
40
Resin Joint Kits
42
30
Insulate
& Protect
with Quality Tapes
3M Thermometers
Infrared
™
Ditection of overheating in electrical equipment and wiring
43
Wire Lubricants
™
Scotchlok
3M
Electrical Spring Connectors
3M™Scotchcast™
26
Sprays & Coatings
Force
3M™ConstantSprings
3M - A Global, Diversified Technology Company
3M - Global Capability, Local Back Up
Everyday, 3M people find new ways to make amazing things happen. Wherever they are, whatever they do, the company’s
customers know they can rely on 3M to help make their lives better. 3M’s brands include Scotch, Post-it, Scotchgard,
Thinsulate, Scotch-Brite, Filtrete, Command and Vikuiti. Serving customers in more than 200 countries around the world, the
company’s 67,000 people use their expertise, technologies and global strength to lead in major markets including consumer
and office; display and graphics; electronics and telecommunications; safety, security and protection services; health care;
industrial and transportation. For more information, including the latest product and technology news, visit www.3m.com.
3M produces over 70,000 existing products many of which are designed specifically for the electrical, electronics and
telecommunications industries.
Scotch, Post-it, Scotchgard, Thinsulate, Scotch-Brite, Filtrete, Command and Vikuiti are trademarks of 3M.
4
We invest in over $1 Billion a year on R & D and employ over 7,000 research engineers dedicated to meeting your needs.
By working closely with our customers we are able to apply our vast experience in cutting edge technologies where it counts
the most: optimizing your product or system capabilities. Working with 3M you’re on the receiving end of the unrivalled
support of a global company - with a strong local presence.
Our manufacturing facilities are ISO 9002 certified and our sites locations are ISO 9001 certified. Moreover, all our products
are independently tested to the major industry standards.
5
3M™ Cold Shrink
3M™ Cold Shrink
Medium Voltage Joints & Terminations
No Heat
Splice bodies 100%
factory tested ensures reliability
Capacitive
Stress Relief
Unique inner
electrode design
Connector
Silicone insulation
Silicone body
provides excellent
electrical properties
Outer semicon layer
One piece design
Capacitative
stress relief
No Flames
No Special Tools
No Shoving
Expanded silicone rubber on removable plastic core.
3M™ Cold Shrink technology utilizes an expanded silicone
rubber material on removable plastic core. The core is removed
by simply unwiding.
Compact Design. Because of superior material used in 3M™
Cold Shrink™ terminations, tails lengths may be reduced and
less space is required.
Accomodates a wide range of sizes. Because the expanded
silicone material technology, one kit fits a wide range of cable
sizes, resulting in reduced inventory.
Superior silicone material. Silicone has unique properties
as an insulator. Its smooth surface ensures that the minimum
amount of contamination adheres to the surface. It is also
inorganic and hydrophobic, (water beads form and run off).
3M silicone materials has these unique benefits for outdoor
termination applications.
3M™ Cold Shrink Outdoor Termination
No High
Installation Cost
No Special Training
No Pushing
Unsurpassed Reliability. 3M TM Cold Shrink technology has been proven
over the last 35 years. Silicone body delivers excellent electrical performance.
Splice bodies are 100% factory tested. 3M TM Cold Shrink technology deliver
s increased radial interface pressure for improved long term reliability. 3M TM
Cold Shrink TM technology is field proven by major Middle East Power utilities.
Simplified Installation. 3M TM Cold Shrink TM technology utilises a one piece
splice body for splicing cable from 6,6-36kv. Taping of phases in terminations
has been eliminated by the use of a one piece 3M TM Cold Shrink silicone
rubber tube which includes stress control, 3M Quick Term II technology.
Forget Heat, flames or shoving. 3M TM Cold Shrink technology is based on
a removable plastic core. There is no need for gas cylinders or torches – simply
unwind the core.
on
e
3M™ Cold Shrink Joint
ic
Sil
3M
Hyd r
f
o
ophobic behaviour
Unique 3M™ Cold Shrink™
delivery system requires no
pushing, heat or flame
Skirted Silicone Insulator
Silicone Insulator with built in
Stress Control Tube
Unique 3M™ Cold Shrink™
delivery system requires
no pushing heat or flames
™
3M Cold Shrink
Cable Accessories
3M™ Cold Shrink™ silicone
cable breakout boot
COnstant force spring
Earth Braid
6
7
3M™ Cold Shrink
3M™ Cold Shrink Termination Kits
VOLTAGE
15kV
3M
™
Cold Shrink
20kV
Joints & Terminations
3M™ Cold Shrink MV Terminations
The one-piece design of this cable termination, manufactured with a specially
formulated silicone material, reduces the likelihood of tracking, is UV stable and
adverse to water (hydrophobic). The cold shrink medium voltage terminations are
available for indoor and outdoor applications for single core and 3-core cables up
to 46kV.
36kV
( For XLPE, Screened Armoured Cables )
NO. CORES
DESCRIPTION
CABLE SIZE
1
Indoor
25 – 95 mm2
120 – 240 mm2
300 – 500 mm2
600 – 1000 mm2
92-EB 62-1 META
92-EB 63-1 META
92-EB 64-1 META
92-EB 65-1 META
1
Outdoor
35 – 70 mm2
95 – 185 mm2
240 – 400 mm2
630 mm2
92-EB 62-2 META
92-EB 63-2 META
92-EB 64-2 META
92-EB 65-2 META
3
Indoor
25 – 35 mm2
50 – 150 mm2
185 – 300 mm2
92-EB 62-3 META
92-EB 63-3 META
92-EB 64-3 META
3
Outdoor
25 – 35 mm2
50 – 150 mm2
185 – 300 mm2
92-EB 62-4 META
92-EB 63-4 META
92-EB 64-4 META
1
Indoor
25 – 95 mm2
70 – 150 mm2
185 – 300 mm2
400 – 800 mm2
93-EB 62-1 META
93-EB 63-1 META
93-EB 64-1 META
93-EB 65-1 META
1
Outdoor
25 – 95 mm2
70 – 150 mm2
185 – 300 mm2
400 - 800 mm2
93-EB 62-2 META
93-EB 63-2 META
93-EB 64-2 META
93-EB 65-2 META
3
Indoor
25 – 70 mm2
95 – 240 mm2
300 – 400 mm2
93-EB 62-3 META
93-EB 63-3 META
93-EB 64-3 META
3
Outdoor
25 – 70 mm2
95 – 240 mm2
300 – 400 mm2
93-EB 62-4 META
93-EB 63-4 META
93-EB 64-4 META
1
Indoor
35 – 95 mm2
120 – 185 mm2
240 – 500 mm2
630 mm2
94-EB 62-1 META
94-EB 63-1 META
94-EB 64-1 META
94-EB 65-1 META
1
Outdoor
35 – 95 mm2
120 – 185 mm2
240 – 500 mm2
630 mm2
94-EB 62-2 META
94-EB 63-2 META
94-EB 64-2 META
94-EB 65-2 META
3
Indoor
25 – 120 mm2
150 – 240 mm2
300 mm2
94-EB 62-3 META
94-EB 63-3 META
94-EB 64-3 META
3
Outdoor
25 – 120 mm2
150 – 240 mm2
300 mm2
94-EB 62-4 META
94-EB 63-4 META
94-EB 64-4 META
Paper Termination Kits
VOLTAGE
15kV
8
3M KIT
( For Belted, PILC MIND Cable )
NO. CORES
DESCRIPTION
CABLE SIZE
3M KIT
3
Indoor
70 - 300 mm2
MT - 16
3
Outdoor
35 – 70 mm2
MO - 16
9
3M™ Cold Shrink
3M™ Barrier Boot System 92-EE717-1
Cold Shrink Joint System
The 3M Barrier Boot System 92EE717-1 consists of a one piece EPDM rubber body
suitable for operating wet indoors under conditions of ambient temperature and
loading. The barrier boot is designed to accommodate bushings of cast resin or
porcelain type with diameters between 40.0-70.0mm and is intended for Coldshrink
terminations of power cables up to 15kV with extruded insulation from 50 up to
300mm2. Voltage rating maximum 8.7/15(17.5)kV. Suitable for both straight and
right angled applications.
Improve reliability, reduce time, labour, and overall cost with our wide
range of one-piece joint bodies. Fits cable sizes from 50mm2 up to
1000mm2 (11kV up to 36kV).
VOLTAGE
NO. CORES
CABLE SIZE
3M KIT
1
50 -150 mm2
120 -400 mm2
500 - 1000 mm2
92-AS 610-1 ME
92-AS 620-1 ME
92-AS 630-1 ME
3
50 - 150 mm2
120 - 300 mm2
92-AS 610-3 ME
92-AS 620-3 ME
1
50 - 300 mm2
500 - 1000 mm2
93-AS 620-1 ME
93-AS 630-1 ME
11kV
Straight/Right Angle Boot
( For XLPE, Screened Armoured Cables )
Cold Aplied Barrier Boot System For Rated Voltages
VOLTAGE
15kV
20kV
DESCRIPTION
CABLE SIZE
3M KIT
3
50 - 300 mm2
93-AS 620-3 ME
3
Non-Removable
25 – 120 mm2
150 – 300 mm2
92 - GBN 610 - 3
92 - GBN 620 - 3
1
50 - 185 mm2
240 - 1000 mm2
94-AS 620-1 ME
94-AS 630-1 ME
3
Removable
50 – 300 mm2
92 - EE 717 - 1
3
50 - 185 mm2
240 - 1000 mm2
94-AS 620-3 ME
94-AS 630-3 ME
NO. CORES
3M™ Gland Kits & Seals
Application
Range Diameter
Voltage Rating
Gland
Part
Number
36kV
Our Medium voltage range is comprehensive and at 3M, we recognize that many
projects and applications require a customized solution to meet your needs. Please
contact 3M Electrical Markets Division for solutions, technical support, product
evaluation, product demonstration and training.
3M™ Cold Shrink Paper Splicing Kits
( For Paper Insulated Belted Cable to XLPE Cable )
Top hat
gland kits
36-65mm
11kV
THG1
VOLTAGE
53-94mm 11kV
THG2
15kV
Top hat
gland seal
only
To fit THG1 11kV
HGS1
To fit THG2 11kV
THGS2
NO. CORES
CABLE SIZE
3M KIT
3
50 – 95 mm2
95 – 185 mm2
240 – 300 mm2
92-OG400-3
92-OG410-3
92-OG420-3
3M™ Cold Shrink Transition Splicing Kits
( For Paper Insulated Belted Cable to XLPE Cable )
3M™ Cold Shrink MV Joints
The QS 2000 E splice body is a prefabricated elastomeric cold
shrink 3-layer construction silicone product. The inner refractive
stress control layer and the silicone insulation layer are co-extruded
during the manufacturing process and the conductive outer screen is
painted and vulcanized to provide proper shielding of electromagnetic
field. The splice body is designed to accommodate all industrial
available cable conductor connecting methods like hexagonal or
deep indent crimping technologies or big variety of mechanical shareoff connecting technologies. The electrical filed around the cable
conductor connection needs to be smoothened by using conductive
tape to avoid any significant increase of electrical stress in the cable
connector area.
For different applications 3M offers many alternative cable screen
connection systems and/or re-jacketing systems to meet customer
requirement with possible best solutions.
10
VOLTAGE
15kV
NO. CORES
CABLE SIZE
3M KIT
3
70 – 120 mm
150 – 240 mm2
300 – 400 mm2
2
92-FG 410-3
92-FG 420-3
92-FG 430-3
*Customized solutions available for transition, size transition, PILC to PILC splicing kits
3M™ Scotchcast™ Cold Shrink Splicing Kits
( For Hydrocarbon Areas )
VOLTAGE
15kV
36kV
NO. CORES
CABLE SIZE
3M KIT
3
2
70 – 120 mm
150 – 240 mm2
300 – 400 mm2
92-OG400-3
92-OG410-3
92-OG420-3
3
50 – 95 mm2
120 – 300 mm2
92-OG400-3
92-OG410-3
11
3M™ Cold Shrink
3M™ Cold Shrink
High Voltage Joints & Terminations
3M Cold Shrink
High Voltage Joints & Terminations
3M Cold Shrink Joint 69/72,5kV
3M QSIII Cold Shrink Series Kits are designed for inline splicing up
to 72.5kV Umax Voltage class, Single core polymeric power cable
systems with copper wire screen according to IEC 60840 04/2004
The same 3M cold shrink technology that the utility industry has
relied on for years has been expanded to 69/72 kV.
3M™ Cold Shrink Termination 69/72,5kV
The versatile design of the prefabricated one-piece cold shrink splice
body allows installation on a wide range of cables sizes and types
and a fast and easy installation at temperatures ranging from-20 C
to +50 C.
3M Kit QT-III, 7672-S-8 Series, is designed to terminate power cable
up to 69/72,5kV. It covers a conductor size of 250 to 2000 kcmil,
125-1000 mm(2). Unlike traditional kits, 3M cold shrink technology
allows the installer to use same installation techniques as used for
medium-voltage cold shrink accessories. For standard and reducedwall cable. • No heat, flame, or special tools are needed during splice body
installation.
Features
• Once installed, cold shrink tube creates a dynamic, compressive
environmental seal and electrical interface without sealants or
adhesives.
• Resists ultra-violet radiation, ozone and industry-approved cable
cleaners.
• Compact design for installation in restricted space,
• Insulator, stress control tubes and compounds and sealing
compound are compatible with common solid dielectric insulation
Applications
• Designed to terminate 650-mil power cable up to 69kV.
• Covers conductor size range of 250 to 2000 kcmil (125-1000
mm2). QT-III termination 7672-S-8 series is designed for outdoor
or indoor installations and meets or exceeds the requirements of:
• IEEE 48, Class 1, for 69kV
• IEC 60849 for 72,5kV
• Applications requiring 350kV BIL performance levels,
• Solid dielectric insulation, such as PE, XLPE and EPR,
• Tape-shielded or LC-shielded high-voltage cables.
Termination Selection Guide
Kit Number
7672-S-8
Primary Insulation
1.94”-3.08”(49.3-75.4 mm)
Jacket O.D. Range
2.45” - 3.61”(62.2-91.7 mm) Conductor Size Range AWG (mm2)
250-2000(120-1000)
• Accommodates crimp or mechanical connectors up to 79mm
diameter and 230mm length.
• Wide application range covering several cable cross sectional
areas from 300mm²- 1000mm²
• Solderless earth connection by means of copper screen sleeve
and constant force springs.
• Thick walled, EMPDM rubber Cold Shrink outer re-jacketing tubes
provide physical protection and moisture sealing of the completed
Inline Splices.
Application Range
Kit Ref
Cable Dimensions for Polymeric Cables
Diameter
Over Cable
Jacket(mm)
Diameter
Over Primary
Insulation
Cross section(mm²)
66/69 (72.5) kV
96-AC640-1(RW)
90
36.6-65.5
300-1000
96-AC 641-1(RW)
90
36.6-65.5
300-1000
Connector Dimensions Crimp or Mechanical Connector
Earth Screen
Cross Section (mm²)
Diameter
Min-Max (mm)
Length
Max. (mm)
50
49.5-79
230
150
49.5-79
230
Note: The final determining factors governing product selection are Cable Insulation O.D. and Cable Jacket O.D. Range.
12
13
3M™ Separable Connectors
Separable Connectors (plug-in)- Rated 6/10 (12kV)
Elbow Connector 250A
Kit Ref
Application Range
CSA (mm2)
Diameter over
Primary Insulation
(mm)
25 - 95
17.2 - 25.0
93-EE 605-2/-95
93-EE 615-2/120
120
Available on request
93-EE 615-2/150
150
Available on request
Elbow Connector 400A
Kit Ref
3M Separable Connectors
™
3M produce a range of silicone rubber Seperable elbow, straight and T connector
kits. The assembly is fully screened and has an integrated stress control element.
Each kit contains all the necessary components to install one Seperable Connector,
including all connection devices.
Application Range
CSA (mm2)
Diameter over
Primary Insulation
(mm)
93-EE 605-4/-95
25 - 95
15.0 - 32.6
93-EE 605-4/-240
95 - 240
15.0 - 32.6
Separable Elbow Connectors
The 93-EE 605-2 kits and the 93-EE 605-4 consist of an elbow
type Separable Connector. The assembly is fully screened and
has an integrated stress control element. Each kit contains all the
necessary components to install one Separable Connector, including
all connection devices.
Applications
These kits are designed to be installed on wire screened nonarmoured
polymeric insulated cables for 6/10kV (Um = 12kV) up to 12/20kV
(Um = 24kV) – 400A / 630A applications. The Separable Connector
establishes the connection between any polymeric insulated cable
onto transformers, switchgears, motors or other equipment.
Straight Connector 250A
Kit Ref
Application Range
CSA (mm2)
Diameter over
Primary Insulation
(mm)
93-EE 600-2/25 25
12.7 - 15.2
93-EE 600-2/35 35
13.8 - 16.3
93-EE 600-2/50 50
15.0 - 17.5
93-EE 600-2/70 70
16.7 - 19.2
93-EE 600-2/95 95
18.3 - 20.8
93-EE 600-2/120 120
19.8 - 22.8
93-EE 600-2/150 150
21.3 - 24.3
Application Range
CSA (mm2)
Diameter over
Primary Insulation
(mm)
93-EE 705-6/-95 50 - 95
15.0 - 32.6
93-EE 705-6/-240 95 - 240
15.0 - 32.6
93-EE 715-6/300 300
26.3 - 30.4
93-EE 715-6/400 400
30.2 - 34.6
Separable Straight Connectors
The 92-EE 600-2 kits consist of a straight type Separable Connector.
The assembly is fully screened and has an integrated stress control
element. Each kit contains all the necessary components to install
one Separable Connector, including all connection devices.
Applications
The 92-EE 600-2 kits consist of a straight type Separable Connector.
The assembly is fully screened and has an integrated stress control
element. Each kit contains all the necessary components to install
one Separable Connector, including all connection devices.
T Connector 630A
Kit Ref
14
Separable T-Connectors
The 93-EE 7x5-6 kits consist of a T-type Separable Connector. The
assembly is fully screened and has an integrated stress control
element. Each kit contains all the necessary components to install
one Plug-In, including all connection devices.
Applications
These kits are designed to be installed on wire screened non-armoured
polymeric insulated cables for 6/10kV (Um = 12kV) up to 12/20kV
(Um = 24kV) – 400A / 630A applications. The Separable Connector
establishes the connection between any polymeric insulated cable
onto transformers, switchgears, motors or other equipment.
15
3M™ Separable Connectors
Separable Connectors (plug-in)- Rated 12/20 (24kV)
Elbow Connector 250A
Kit Ref
Elbow Connector 400A
Application Range
CSA (mm2)
Diameter over
Primary Insulation
(mm)
93-EE 605-2/-95 25 - 95 17.2 - 25.0
93-EE 615-2/120 120 24.0 - 27.0
93-EE 615-2/150 150 25.5 - 28.5
Elbow Connector 400A
Kit Ref
Separable Connectors (plug-in)- Rated 18/30 (36kV)
Application Range
CSA (mm2)
Elbow Connectors
The 93-EE 605-2 kits and the 93-EE 605-4 consist of an elbow
type Separable Connector. The assembly is fully screened and
has an integrated stress control element. Each kit contains all the
necessary components to install one Separable Connector, including
all connection devices.
Applications
These kits are designed to be installed on wire screened nonarmoured
polymeric insulated cables for 6/10kv (Um = 12kV) up to
12/20kV (Um = 24kV) - 400 Applications. The Separable Connector
establishes the connection between any polymeric insulated cable
onto transformers, switchgears, motors or other equipment.
Kit Ref
94-EE 605-4/35 35 22.8 - 25.5
94-EE 605-4/50 50 23.5 - 26.7
94-EE 605-4/70 70 25.1 - 28.4
94-EE 605-4/95 95 26.7 - 30.0
94-EE 605-4/120 120 28.3 - 32.0
94-EE 605-4/150 150 29.9 - 33.5
94-EE 605-4/185 185 31.5 - 35.1
94-EE 605-4/240 240 33.4 - 37.6
94-EE 605-4/300 300 35.6 - 39.6
25 - 95 15.0 - 32.6
93-EE 605-4/-240 95 - 240 15.0 - 32.6
Straight Connector 250A
Diameter over
Primary Insulation
(mm)
93-EE 600-2/25 25 17.0 - 19.5
93-EE 600-2/35 35 18.0 - 20.5
93-EE 600-2/50 50 19.2 - 21.7
93-EE 600-2/70 70 20.9 - 23.4
93-EE 600-2/95 95
22.5 - 25.0
93-EE 600-2/120 120
24.0 - 27.0
93-EE 600-2/150 150
25.5 - 28.5
Straight Connectors
The 93-EE 600-2 kits consist of a straight type Separable Connector.
The assembly is fully screened and has an integrated stress control
element. Each kit contains all the necessary components to install
one Separable Connector, including all connection devices.
Applications
These kits are designed to be installed on wire screened non-armoured
polymeric insulated cables up to 6/10kV (Um = 12kV) up to 12/20kV
(Um = 24kV) – 400A / 630A applications. The Separable Connector
establishes the connection between any polymeric insulated cable
onto transformers, switchgears, motors or other equipment.
93-EE 705-6/-95
Diameter over
Primary Insulation
(mm)
50 - 95
15.0 - 32.6
93-EE 705-6/-240 95 - 240 15.0 - 32.6
93-EE 715-6/300 300 30.2 - 34.6
93-EE 715-6/400 16
Application Range
CSA (mm2)
400 33.5 - 37.8
Application Range
CSA (mm2)
70
25.1 - 28.4
94-EE 705-6/95
95
26.7 - 30.0
94-EE 705-6/120
120
28.3 - 32.0
94-EE 705-6/150
150
29.9 - 33.5
94-EE 705-6/185
185
31.5 - 35.1
94-EE 705-6/240
240
33.4 - 37.6
94-EE 705-6/300
300
35.6 - 39.6
Applications
These kits are designed to be installed on wire screened nonarmoured
polymeric insulated cables up to 18/30kV (Um = 36kV) - 400A
applications. The Separable Connector establishes the connection
between any polymeric insulated cable onto transformers,
switchgears, motors or other equipment.
Applications
These kits are designed to be installed on wire screened non-armoured
polymeric insulated cables up to 6/10kV (Um = 12kV) up to 12/20kV
(Um = 24kV) – 400A / 630A applications. The Separable Connector
establishes the connection between any polymeric insulated cable
onto transformers, switchgears, motors or other equipment.
T-Connectors
The 94-EE 705-6/x kits consist of a T-type Separable Connector.
The assembly is fully screened and has an integrated stress control
element. Each kit contains all the necessary components to install
one Plug-In, including all connection devices.
Applications
These kits are designed to be installed on wire screened
nonarmoured polymeric insulated cables for 18/30 (Um = 36kV)
400A/ 630A applications. The Separable Connector establishes the
connection between any polymeric insulated cable onto transformers,
switchgears, motors or other equipment.
Accessories for Separable Connectors
Name
T-Connectors
The 93-EE 705-6/x2 kits consist of a T-type Separable Connector.
The assembly is fully screened and has an integrated stress control
element. Each kit contains all the necessary components to install
one Plug-In, including all connection devices.
Diameter over
Primary Insulation
(mm)
94-EE 705-6/70
Coupling pieces
T Connector 630A
Kit Ref
Elbow Connectors
The 94-EE 605-4 kits consist of an elbow type Separable Connector.
The assembly is fully screened and has an integrated stress control
element. Each kit contains all the necessary components to install
one Separable Connector, including all connection devices.
T Connector 630A
Kit Ref
Application Range
CSA (mm2)
Diameter over
Primary Insulation
(mm)
Diameter over
Primary Insulation
(mm)
93-EE 605-4/-95 Kit Ref
Application Range
CSA (mm2)
3M Type
KU 21
Description
Usable for
250A separable connectors
9x-EE 600-2/x
Coupling pieces
KU 23.2
Silicone coupling pieces to connect T-plugs
T- Plug 93-EE 705-6x
Coupling pieces
KU 33
Silicone coupling pieces to connect T- plugs
T-Plugs 300 and 400mm2
Earthing accessories
ER 23
for plug in terminations disconnected from the switchgear
T-Plugs
Test adapter
PR 23.1
T-shaped test bushing
T- Plugs
Post insulator
STF 21
To connect XLPE-cables to bushings with a 250A bushing
using conventional terminations
250A bushings interface type A
Surge-proof terminating caps
SP 21
Terminating caps size A
Surge-proof terminating caps
SP 33
Terminating caps size C
Surge arrester
MUT 23 (12kV)
Surge arrester Uc = 12kV
T- Plug 93-EE 705-6x
Surge arrester
MUT 23 (22kV)
Surge arrester Uc = 22kV
T- Plug 93-EE 705-6x
Surge arrester
MUT 23 (24kV)
Surge arrester Uc = 24kV
T- Plug 93-EE 705-6x
Surge arrester
MUT 33 (30 kV)
Surge arrester Uc = 30kV
705-6x (KU33 needed)
Surge arrester
MUT 33 (15 kV)
Surge arrester Uc = 15kV
705-6x (KU33 needed)
T-Plug with metal housing
93-EM 705-6/-95
10 up to 20kV T-Plug 25-95mm2
Based on 93-EE 705-6/-95
T-Plug with metal housing
93-EM 705-6/-240
10 up to 20kV T-Plug 95-240mm2
Based on 93-EE 705-6/-240
Elbow with metal housing
93-EM 605-2/-95
10 up to 20kV Elbow 25-95mm2
Based on 93-EE 605-2/-95
17
End Caps & Cable Abandonement Kits
3M™ Cold Shrink End Caps
They are easily installed and cleanly removable, there are four different end caps available to accommodate a wide range of sizes.
Features
• Simple & fast installation – no tools required
• Wide range of cable sizes accommodated
• Good abrasion resistance
• Seals tight – retains resiliency & pressure after prolonged
ageing & exposure
• Water-resistant
• No heat required
• Resistant to acid, alkalis, fungus, ozone, UV
• Easily removed
Applications
• Cable protection from exposure to moisture
Product No.
3M
™
Cold
Shrink
End Caps & Cable Abandonement Kits
Use range (mm)
EC-1
11.6 - 20.9
EC-2
15.9 - 30.1
EC-3
26.0 - 49.2
EC-4
45.5 - 84.3
3M™ Cold Shrink Cable Abandonment Kits
Suitable for Cable Types: XLPE/PVC Insulation, Lead Sheath, Steel Wire Armour, PVC Sheathed. Also suitable for Ship wiring Cables, Rubber/GSWB,
and/or Unarmoured Cables Up to and including 1.9/3.3kV. Single and Multi-core Cables
A complete kit with all the components required to abandon cables either temporarily or permanently. Provides environmental seal and mechanical
protection, eliminates the requirements for heat during installation using 3M Cold Shrink technology.
3M Cold Shrink End Caps environmentally seal and mechanically protect exposed
cable ends using no tools, mastics or tapes. They are close-ended, tubular rubber
sleeves that are factory expanded and loaded onto a removable core. When
positioned over the end of a cable, or other cylindrical object, the core is removed
to provide a reliable seal that protects your cable ends from environmental damage.
(I.e. moisture, contamination, corrosion, ozone, ultra-violet and radiation)..
18
Each kit includes Cold Shrink End Cap, Cold Shrink Pre Stretched Tube, Armour continuity, tapes, and full instructions.
ACCEPTED
CABLE
DIAMETER
(mm) KIT REFERENCE
12 -18
CSCAK/1
18 - 25
CSCAK/2
25 - 42
CSCAK/3
42 - 55
CSCAK/4
56 - 81
CSCAK/5
19
3M™ Heat Shrink
3M™ Thin Wall Heat Shrink Tubing
Wide range of heat shrinks tubing to insulate electrical cables
and wires:
• For any environment where wires are joined, connected
or terminated
• Simple insulation to heavy duty projection
• Phase and circuit identification and wire marking
• Lightweight wire harness covering & wire bundling
• Excellent chemical and solvent resistance
• Skin tight even over irregular shaped objects
• Speedy and easy to use
• FP-301 polyolefin tubing has 2:1 shrink ratio.
3M
Applicable Specification
• MIL-DTL-23053/5
• Class 1,2;
• AMS – 3636
• AMS – 3637
• UL File E-39100
• E-69751
• CSALR38227
• ABS
™
Heat Shrink
3M Heat Shrink products provide longterm reliable performance and excellent
mechanical and environment protection. Easy to install, 3M Heat Shrink tubing
comes ready to use and with the application of moderate heat automatically moulds
to a skin tight fit – even over irregularly shaped objects.
The comprehensive 3M range includes, thin-walled, medium and thick walled tubing,
adhesive lined tubing, and a range of moulded parts, featuring:
• High temperature resistance
• High strength and good mechanical properties
• Excellent solvent and chemical resistance
• Superior thermal and form stability
• Shape memory
• Precise shrink ratio and recovery
• Superior split and crack resistance
--------- as supplied ------------------ recovered
20
Standard Sizes and Dimensions (3M™ FP-301 Tubing)
Ordering Size Expanded ID Minimum Recovered ID Maximum
Recovered Wall Thickness
(Nominal)
in.
(mm)
in.
(mm)
in.
(mm)
3/64 .046
(1,17)
.023
(0,58)
.016
(0,41)
1/16 .063
(1,60)
.031
(0,79)
.017
(0,43)
3/32 .093
(2,36)
.046
(1,17))
.020
(0,51)
1/8 .125
(3,18)
.062
(1,57)
.020
(0,51)
3/16 .187
(4,75)
.093
(2,36)
.020
(0,51)
1/4 .250
(6,35)
.125
(3,18)
.025
(0,64)
3/8 .375
(9,53)
.187
(4,75)
.025
(0,64)
1/2 .500
(12,70)
.250
(6,35)
.025
(0,64)
3/4 .750
(19,05)
.375
(9,53)
.030
(0,76)
1
1.000
(25,40)
.500
(12,70)
.035
(0,89)
1-1/2 1.500
(38,10)
.750
(19,05)
.040
(1,02)
2
2.000
(50,80)
1.000
(25,40)
.045
(1,14)
3
3.000
(76,20)
1.500
(38,10)
.050
(1,27)
4
4.000
(101,60)
2.000
(50,80)
.055
(1,40)
21
3M™ Heat Shrink
Bore Supplied min/ Bore Recovery Max
1.5mm
0.5mm
3.0mm
1.0mm
9.0mm
3.0mm
18.0mm
6.0mm
39.0mm
12.7mm
3M™ GTI 3000 - General Purpose
Thin Wall Insulation Polyolefin
3M™ HDT - A - Adhesive Lined Heavy Duty Polyolefin
HDT-A is thick wall polyolefin tubing. The toughness and weather ability of the tubing make
it well suited for exposed applications. HDT-A is supplied with a specially designed hot melt
adhesive layer. The adhesive is applied during extrusion of the tubing thus achieving a very
smooth, constant adhesive layer, which ensures excellent sealing properties. Shrink ratio: Up
to 4 : 1
GTI 3000 is flexible, thin walled heat shrink tubing, made of cross-linked, halogen free
polyolefin. The tubing meets the latest requirements regarding shrinking time, flexibility, and
material characteristics.
GTI 3000 is designed to provide excellent insulation and protection in various industrial
applications. The large diameter range, and 3:1 shrink ratio offers many solutions within a
small range of products. GTI 3000 is available in a wide range of colours, with a shiny, smooth,
particle free surface. Suitable for cable marking and identification applications. Continuous
operating temperature -55°C to 135°C. Supplied in 1 metre pieces.
HDT-A meets the longitudi nal sealing requirements of VDE 0278 part 3 and is, therefore, ideal
for sealing underground or exposed inline joints and terminations.
Supplied in 1 metre pieces. Continuous operating temperature range: -55°C to 130°C, outer
wall only. Available in black.
GTI 3000 fulfills the strict requirements of many standards, including RoHS. Available in the
following colours: Black, White, Blue, Brown, Red, Clear, Yellow, Green/Yellow*
* Size 1.5 / 0.5 not available in Green / Yellow
Bore Supplied min
3M™ GTI - General Purpose Thin Wall Insulation Polyolefin
3M GTI is flexible thin walled polyolefin tubing, with fast shrink time and excellent electrical and
mechanical properties.
GTI is designed to provide excellent insulation and protection in various industrial applications.
Bore Supplied min/ Bore Recovery Max
51mm
25.4mm
76mm
38mm
102mm
51mm
Continuous operating temperature -55°C to 135°C with a 2:1 Shrink Ratio. Supplied in 1 metre
pieces. Available in the following colour & size combinations to complement the GTI-3000
Range; Black, White, Blue, Brown, Red, Clear, Yellow
22
12mm
3mm
19mm
6mm
27mm 8mm
32mm 7.5mm
38mm
12mm
50mm
18mm
70mm
26mm
90mm
36mm
120mm
40mm
Bore Recovery Max
12mm
3mm
19mm
6mm
30mm
8mm
38mm
12mm
48mm
15mm
85mm
26mm
115mm
38mm
Low Voltage (up to 1kV)
91-AH (A) Series for Crimp Connectors
3M™ MDT - A - Adhesive Lined Medium Duty Polyolefin
Application
91-AH (A) Series has been developed to offer an easy method for jointing low voltage polymeric
insulated cables thus ensuring a moisture sealed connection. The kit consists of the appropriate
inner tubes, other tubes and a user-friendly installation drawing. Kits suitable for shielded and
armoured cables also include constant force springs and a copper sleeve for armour continuity.
Kits are designed for a wide range of cable cross-sections optimizing stock holding. The
91-AH(A) Series can be used with all common crimp connectors and also for splicing with
phase crossing.
A non-adhesive version is available (MDT), please contact customer service for details
The adhesive lining makes it especially suitable for underground cable joint applications. For
Offshore and Naval applications, a modified MDT-A approved by Det Norske Veritas is available
(MDT-A-F471).
Technical Features
The 91-AH(A) Kits are made from cross linked polyolefin tubing, which is internally coated
with hot melt adhesive. As the adhesive melts and the sleeve shrinks, a perfect waterlight seal
is formed. Each kit contains all the necessary tubings and an appropriate instruction sheet
outlining the different steps of jointing installation. The outer sleeve is manufactured from heavy
duty, thick wall, flame retardant tubing.
MDT-A is specially designed medium wall tubing, which provides tough and flexible insulation
and is ideal for the protection of cable joints and terminations. MDT-A is lined with a specially
designed adhesive, which is applied during the tubing’s extrusion process. This achieves a
very smooth adhesive layer, which ensures excellent sealing properties. MDT-A meets the
requirements of VDE 0278 part 3.
Bore Supplied min/ Bore Recovery Max
/
Supplied in 1 metre pieces. Continuous operating temperature range: -35°C to 130°C, outdoor
wall only.Available in black - Shrink ratio is up to 4.5: 1
• Quick and easy installation
• Kits designed to accommodate a wide
range of cross sections up to 300mm2
• Excellent moisture sealing
• Flame retardant tubing
• Kits available for both 4 and 5 core
cables
• Kits also available for shielded and
armoured cables
(Cross section
in mm2)
Non
Shielded
Cable
Shielded/
Armoured
Cable
(Cross section
in mm2)
5 x 1.5 to 5 x 6
91 –AH-20-5S
-
-
5 x 6 to 5 x 16
4 x 6 to 4 x 25*
91-AH-21-5S
-
-
91-AH-21-S*
91-AHA-21-S
4 x 6 to 4 x 16
4 x 35 to 4 x 50
91-AH-22-S*
91-AHA-22-S
4 x 25 to 4 x 35
4 x 70 to 4 x 95*
91-AH-23-S*
91-AHA-23-S
4 x 50 to 4 x 70
4 x 95 to 4 x 150
91-AH-24-S
91-AHA-24-S
4 x 95 to 4 x 150
4 x 185 to 4 x 300*
91-AH-25-S*
91-AHA-25-S
4 x 185 to 4 x 240
*The majority of cable cross-sections can be covered with these 3 kits
23
3M™ Heat Shrink
3M™ Heavy Duty Wraparound HDCW
The HDCW Wraparound Heat Shrink Cable Repair Sleeve is designed to repair damaged cable
sheaths. It is also suitable for use with cable joints and as additional corrosion protection on
undamaged cables.
HDCW is made from modified cross-linked polyolefin with a hot-melt adhesive coated to the
inner side of the sleeve. Upon heating, the sleeve shrinks and the adhesive melts, thereby
achieving a safe and watertight bond between the sleeve and the cable. A corrosion proof metal
clip is used to fully close the sleeve.
• Quick and easy to use
• Maximum protection against mechanical stress
• Good bonding to PE and PVC surfaces
• Excellent resistance to even the harshest environments
• Forms a perfect seal to prevent moisture ingress
Expanded
Inner
Diameter
(mm)
Recovered
Inner
Diameter
(mm)
Part
Number
35 / 10
50
8
HDCW 35/10-250
250
HDCW 35/10-500
500
HDCW 35/10-750
750
HDCW 35/10-1000
1000
HDCW 35/10-1200
1200
HDCW 55/15-250
250
HDCW 55/15-500
500
HDCW 55/15-750
750
HDCW 55/15-1000
1000
HDCW 55/15-1200
1200
HDCW 80/25-250
250
HDCW 80/25-500
500
HDCW 80/25-750
750
HDCW 80/25-1000
1000
HDCW 80/15-1200
1200
HDCW 110/30-250
250
HDCW 110/30-500
500
HDCW 110/30-750
750
HDCW 110/30-1000
1000
HDCW 110/30-1200
1200
HDCW 140/40-250
250
HDCW 140/40-500
500
HDCW 140/40-750
750
HDCW 140/40-1000
1000
HDCW 140/40-1200
1200
80 / 25
110 / 30
140 / 40
75
100
132
145
13
23
25
32
3M™ Break Outs
3M Heat Shrink Moulded Parts offer excellent electrical and mechanical protection and are
resistant to a range of corrosive fuels, fluids and chemicals. By ordering a combination of tubing
and breakouts you can customize your termination on site to suit all cable diameters, conductor
tail lengths etc.
3M™ SKE 2F / 2 Way Outlet Sleeve Breakout
Cable
Diameter
Max/Min
(mm)
55 / 15
Heat Shrink - Moulded Parts
Length Minimum
(mm) Recovered
Wall
Thickness
(mm)
2.0
2.0
2.0
SKE - 2F/1
Recovered
Diameter
H
(Min)
mm
K
(Min)
mm
H
K
(Max) (Max)
mm mm
30.0
15.0
9.4
4.1
Recovered
Dimensions
(fully shrunk)
S
P±
R± HW± W±
(Nom) 10% 10% 20% 20%
mm mm mm mm mm
(Mm2)
20.0 94.0 30.0
4-35
Expanded
Recovered
Diameter
Diameter
(as supplied)
1.8
1.5
1.2
Recovered
Dimensions
(fully shrunk)
Conductor
Size
Range
Part No.
H
(Min)
mm
K
(Min)
mm
H
K
(Max) (Max)
mm mm
S
P±
R± HW± W±
(Nom) 10% 10% 20% 20%
mm mm mm mm mm
SKE-3F/1=1.5
SKE-3F/2
SKE-3F/4
SKE-3F/5
25.0
31.0
55.8
72.0
9.0
15.0
30.4
37.0
9.0 3.0
18.0 5.0
22.5 9.0
35.0 17.5
16.0
23.0
37.0
55.0
68.0
89.0
180.0
178.0
18.0
24.0
44.0
38.0
2.5
2.5
2.0
4.0
2.0
2.3
2.0
3.0
(Mm2)
4-16
16-35
50-150
185-300
3M™ SKE 4F / 4 Way Outlet Sleeve Breakouts
Expanded
Recovered
Diameter
Diameter
(as supplied)
2.0
Conductor
Size
Range
3M™ SKE 3F / 3 Way Outlet Sleeve Breakouts
Recovered
Dimensions
(fully shrunk)
Conductor
Size
Range
Part No.
H
(Min)
mm
K
(Min)
mm
H
K
(Max) (Max)
mm mm
S
P±
R± HW± W±
(Nom) 10% 10% 20% 20%
mm mm mm mm mm
(Mm2)
SKE-4F/1+2
SKE-4F/3+4
35.0
47.4
15.0
21.5
12.0
22.9
22.0 95.0 24.0
38.1 202.0 38.1
4-35
35-95
3.0
6.4
2.5
4.1
2.0
3.3
3M™ SKE 4F / 5
Expanded
Diameter
(as supplied)
Part No.
SKE-4F/5
24
Expanded
Diameter
(as supplied)
Recovered
Dimensions
(fully shrunk)
H
K
S
H
K
S
P± R± HW± W±
(Min) (Min) (Nom) (Max) (Area Max) (Nom) 10% 10% 20% 20%
mm mm mm
mm
mm
mm mm mm mm mm
78.7 38.1 76.2
35.6
129.0
50.8 205.0 38.1 3.8 3.3
Conductor
Size
Range
(Mm2)
120-300
25
3M™ Scotchcast Resin
3M™ Scotchcast™ Resin Joints offer a high degree of
mechanical strength for physical protection of connections and
moisture-resistant insulation in above ground or direct burial
applications.
Features
• Utilizes a “bulge“ type mould
• Features Scotchcast™ 460M polyurethane resin
• Meets VDE 0278, BS 6910
Benefits
• 90A series are ideal for armoured cables
• Tough and moisture-proof
• Long lasting physical and electrical protection
• All kits include tape for insulating ferrules and sealing mould ends
• Tried and tested for over 30 years
• 3M worldwide quality guarantee
3M
™
Scotchcast™
Resin Joint Kits
3M™ resin insulated splicing kits are designed for indoor, outdoor (weather exposed),
direct buried or submersed applications. 3M brand Scotchcast™ Resins are 100%
solids, electrical grade, hydrolytically stable insulating resins. Their unique electrical
and physical properties make them ideal for insulating and protecting electrical/
electronic pars and assemblies. Their physical features also make them suitable for
non-electrical, general use applications, for example as adhesives or sealants.
Selection Chart
Product Min. Cable O.D. Max. Cable O.D.
Max. Cross Section Range (mm²)
Non-Armoured Cable Armoured Cable
Scotchcast™ 90A-01
8 mm
28 mm
3 x 16
4 x 16
3 x 10
4 x 10
Scotchcast™ 90A-02
14 mm
32 mm
3 x 35
4 x 25
3 x 16
4 x 16
Scotchcast™ 90A-03
23 mm
39 mm
3 x 50
4 x 50
3 x 50
4 x 35
Scotchcast™ 90A-04
28 mm
51 mm
3 x 95
4 x 95
3 x 95
4 x 70
Scotchcast™ 90A-05
30 mm
55 mm
Scotchcast™ 90A-06
45 mm
70 mm
Scotchcast™ 90A-07
48 mm
86 mm
A Safe, Clean, Simple & Reliable Joint Solution
•
•
•
•
•
26
High quality range of resins for low and medium voltage applications
Unique Patented Close Mixing and Pouring (CMP) system
Transparent Moud for better control of the job
Resin packed in transparent 2-chamber mixing bags
Approvals according to VDE 0291 part 2
27
3M™ Scotchcast Resin
Low Voltage Range
The new body design is based on a completely new hinged, one-part joint body that
allows resin to be sealed inside the mould without the use of mastic and tape - it does
this by using an expanding foam seal.
New 3M Series
INLINE KITS
92-NBA0
92-NBA1
92-NBA2
92-NBA3
92-NBA4
92-NBA5
92-NBA6
92-NBA7
92-NBA0-U
92-NBA1-U
92-NBA2-U
92-NBA3-U
92-NBA4-U
92-NBA5-U
92-NBA6-U
92-NBA7-U
92-NBA0
92-NBA0
92-NBA1
92-NBA1
92-NBA4
Old Series
92 A Series
92 AU Series
(Hazardous areas e.g.
petrochemical sites)
82 A Series
Application Range
Bag Size in ml
4X
4X
4X
4X
4X
4X
4X
4X
1.5
1.5
6
16
25
50
70
120
4
10
16
25
50
95
150
240
1x 90
1x 135
1x 200
1x 370
1x 680
1x 1375
2x 1375
3x 2200
4X
4X
4X
4X
4X
4X
4X
4X
1.5
1.5
6
16
25
50
70
120
4
10
16
25
50
95
150
240
1x 90
1x 135
1x 200
1x 370
1x 680
1x 1375
2x 1375
3x 2200
4X
4X
4X
4X
4X
1.5
1.5
1.5
1.5
25
4
4
10
10
50
1x 90
1x 90
1x 135
1x 135
1x 680
Resin Systems Selection Chart
The new Scotchcast resin, fully compliant with EU legislation, has
hydrophobic property which makes it perfect for a use in presence of
water and proposed in bag with a pouring nozzle, which represents, one
step less in the preparation process.
New 3M REF
Old Series
No. 4
New 3M Series
BRANCH KITS
92-NBC1
92-NBC1
92-NBC2
92-NBC2
92-NBB1
92-NBB1
92-NBB1
92-NBB2
92-NBB1
92-NBB2
92-NBB1-U
92-NBB2-U
Old Series
91-C Series
92-B Series
92-BU Series
Core
Branch
Min
Branch
Max
4X/5X
4X/5X
4X/5X
4X/5X
2,5/1,5
2,5/1,5
4/4
4/4
16/10
16/10
35/25
35/25
2,5/1,5
2,5/1,5
2,5/4
2,5/4
16/10
16/10
25/25
25/25
4X/5X
4X/5X
4X/5X
4X/5X
4X/5X
4X/5X
2,5/1,5
2,5/1,5
2,5/1,5
4/4
2,5/1,5
4/4
16/10
16/10
16/10
35/25
16/10
35/25
2,5/1,5
2,5/1,5
2,5/1,5
2,5/4
2,5/1,5
2,5/4
16/10
16/10
16/10
25/25
16/10
25/25
4X/5X
4X/5X
2,5/1,5
4/4
16/10
35/25
2,5/1,5
2,5/4
16/10
25/25
1.5
6
16
35
95
120
150
6
10
25
70
150
185
240
1.5
4
10
35
70
95
150
4
10
16
50
120
150
240
BRANCH / DOUBLE BRANCH / INLINE JOINTS
4X
92-AB 111
4X
92-AB 112
4X
92-AB 113
91-AB Series
4X
92-AB 114
4X
92-AB 115
4X
92-AB 116
4X
92-AB 117
28
Main Min Main Max
No. 40*
3M REF
No. 2123
Product Descrption
Yes
Size C 426G (370ml)
Yes
Size B 230G (200ml)
Yes
Size A 100G ( 90ml)
No
Bulk Size B 230G (200ml)
No
Bulk Size C 426G (370ml)
No
Bulk Size C 426G (370ml)
Yes
FR W Size C 426G (370ml)
Yes
FR W Size B 230G (200ml)
No. 1471
No. 47
No. 1402*
Nozzle
No. 1400 U
RESIN TYPE
Polyurethane
SIZE
DESCRIPTION
Size C - 12.3 oz
Re-entrable compound,
Size D - 21.2 oz
Low viscosityflows well at low temperatures,
Excellent wetting properties
No. 2130
Polyurethane
Size B - 216 g
Flexible resin used in areas where the mould is
Size C - 616 g
removed i.e for flexible splicing
*closed mix and pour system
29
Electrical Tapes
Vinyl Electrical Tapes
Insulate & Protect
with Quality Tapes
Get your hands on 3M Tape!
3M now offers new and experienced electricians a chance to sharpen their skills
with the complete 3M tape training kit (80-6114-2896-4). The kit contains all the
tools needed for the following applications:
•
•
•
•
30
Insulating & wrapping a split bolt
Insulating & wrapping a motor lead connection
Insulating & wrapping an inline splice
Insulating & wrapping a bus bar
Product Description/
Applications
Tape
Thickness
Temp
Range
Scotch® Super 33+™
Professional Grade
Vinyl Electrical
Tape*
Insulates splices up to 600V. Repairs
cable jacketing. Resists UV rays,
abrasion, corrosion, alkalies and acids.
Flame retardant. UL Listed and CSA
Certified.
7 mil
105°C
221°F
3/4” x 66’ (19 mm x 20,1 m)
3/4” x 44’ (19 mm x 13,4 m)
3/4” x 20’ (19 mm x 6,0 m)
3/4” x 36 yd (19 mm x 32,9 m)
1” x 36 yd (25,4 mm x 32,9 m)
1-1/2” x 36 yd (38 mm x 32,9 m)
Scotch® Heavy
Duty Grade Vinyl
Electrical Tape
Super 88*
Thick, heavy duty vinyl protects cable and
provides faster build-up. Insulates splices
up to 600V. Repairs cable jacketing.
Resists UV rays, abrasion, corrosion,
alkalies and acids. Flame retardant.
UL Listed and CSA Certified.
8.5 mil
105°C
221°F
3/4’’ x 66’ (19 mm x 20,1 m)
3/4’’ x 44’ (19 mm x 13,4 m)
3/4” x 36 yd (19 mm x 32,9 m)
1” x 36 yd (25,4 mm x 32,9 m)
1-1/2” x 36 yd (38 mm x 32,9 m)
1-1/2” x 44’ (38 mm x 13,4 m)
2” x 36 yd (51 mm x 32,9 m)
Scotch®
Professional Grade
Color Coding Vinyl
Electrical Tape 35*
9 fade-resistant colors identify and mark
phases/cables. Insulate splices up to
600V. Repair cable jacketing. Resists
UV rays, abrasion, corrosion, alkalies and
acids. Flame retardant. UL Listed and
CSA Certified.
7 mil
105°C
221°F
3/4’’ x 60’ (19 mm x 18,2 m)
1/2’’ x 20’ (12 mm x 6,1 m)
3/4” x 66’ (19 mm x 20,1 m)
1/2” x 20’ (12 mm x 6,1 m)
Scotch® Extra
Heavy Duty Grade
Vinyl Electrical Tape
22*
Extra-thick, heavy duty vinyl protects
cable and provides faster build-up.
Insulates splices up to 600V. Repairs
cable jacketing.
Resists UV rays,
abrasion, corrosion, alkalies and acids.
Flame retardant. UL Listed and CSA
Certified.
10 mil
80°C
176°Fl
1/2” x 36 yd (13 mm x32,9 m)
3/4” x 36 yd (19 mm x 32,9 m)
1” x 36 yd (25,4 mm x 32,9 m)
1-1/2” x 36 yd (38 mm x 32,9 m)
2” x 36 yd (51 mm x 32,9 m)
3M™ Highland™
Medium Grade Vinyl
Electrical Tape*
Bundles cable and pull wire. Insulate
splices up to 600V. Flame retardant.
UL Listed and CSA Certified.
7 mil
90°C
194°F
3/4” x 60’ (19 mm x 20,1 m)
3/4” x 66’ (19 mm x 20,1 m)
3M™ Temflex™
Economy Grade
Vinyl Electrical Tape
1700
Bundle cable, wire pull and repair cable
jacketing. Flame retardant. UL Listed
and CSA certified.
7 mil
80°C
176°F
3/4” x 60’ (19 mm x 18,2 m)
3/4” x 36 yd (19 mm x 32,9 m)
3/4” x 66’ (19 mm x 20,1 m)
1” x 66’ (25,5 mm x 20,1 m)
3M™ Temflex™
Mining Grade Vinyl
Electrical Tape
1700P
Insulate & repair mining cable jacketing.
Flame retardant. Printed for use in
MSHA - approved splicing kits.
7 mil
80°C
176°F
3/4” x 66’ (19 mm x 20,1 m)
1-1/2” x 44’ (38 mm x 13,4 m)
1-1/2” x 66’ (38 mm x 20,1 m)
3/4” x 66’ (19 mm x 20,1 m)
1-1/2” x 44’ (38 mm x 13,4 m)
1-1/2” x 66’ (38 mm x 20,1 m)
3M™ Economical
General Purpose
PVC
Tape, available in Black, Red, Blue,
Brown, Yellow, White, Green, Orange,
Grey for colour coding on wires and
cables 0.15mm thickness Elongation
125%
5 mil
80°C
3/4” x 8 YDS (14mmx 7.31m)
3/4” x YDS (19mmx9.14m)
3/4” x 20 YDS (19mmx6,0m)
3/4” x 66 YDS (19mmx20.1m)
Product Description/
Applications
Tape
Thickness
Temp
Range
Scotch®
Professional Grade
Linerless Rubber
Splicing Tape 130C*
Insulate and splice solid dielectric
cables through 69kV. Linerless, highvoltage insulating, thermally conductive,
self-bonding rubber.
30 mil
continuous:
90°C / 194°F
short-term:
130°C / 266°F
1” x 30’ (25 mm x 9,1 m)
3/4” x 30’ (19 mm x 9,1 m)
1-1/2” x 30’ (38 mm x 9,1 m)
2” x 30’ (50 mm x 9,1 m)
1” x 10’ (25 mm x 3,05 m)
1” x 15’ (25 mm x 4,6 m)
Scotch®
Professional Grade
Linered Rubber
Splicing Tape 23
Insulate and splice solid dielectric cables
through 69kV. Linered, insulating,
thermally conductive, self-bonding
rubber.
30 mil
continuous:
90°C /194°F
short term:
130°C / 266°F
3/4” x 30’ (19 mm x 9,1 m)
1” x 20’ (19 mm x 25 m)
1” x 30’ (25 mm x 9,1 m)
1-1/2” x 30’ (38 mm x 9,1 m)
2” x 30’ (50 mm x 9,1 m)
Scotch® Medium
Grade Linerless
Rubber Splicing
Compound 2242*
Splice and insulate cables and
connections. General purpose, linerless
rubber insulating tape.
30 mil
continuous:
90°C / 194°F
short-term:
130°C / 266°F
3/4” x 15’ (19 mm x 4,57 m)
1-1/2” x 15’ (38 mm x 4,57 m)
2” x 15’ ( 51 mm x 4,6 m)
Rubber Electrical Tapes
Roll Size
Roll Size
31
Electrical Tapes
Rubber Electrical Tapes
Tape
Thickness
Temp
Range
Roll Size
3M™ Temflex™
Linered Rubber
Splicing Tape 2150
Economical, low-voltage, linered rubber
insulating tape. Up to 600 volts.
30 mil
80°C
176°F
3/4” x 22’ (19 mm x 6,7 m)
1-1/2” x 22’ (38 mm x 6,7 m)
Scotch®
Professional Grade
Semi-Conducting
Tape 13
Rubber
tape,
semi-conductive.
Compatible with cable semi-conducting
jackets. Electrically ground high-voltage
connections. Provides cable shield
continuation.
30 mil
continuous:
90°C /194°F
short term:
130°C / 266°F
3/4” x 15’ (19 mm x 4,5 m)
1-1/2 x 66’ (38 mm x 20,1 m)
Scotch®
Professional Grade
Silicone Rubber
Tape 70
Protects and overwraps high-voltage
cable terminations and serves as base
layer to provide clean reentry into
connections. Arc and track resistant.
Self-fusing, long-lasting, silicone rubber.
12 mil
180°C
356°F
1” x 30’ (25 mm x 9,14 m)
Scotch®
Professional
Grade Heavy Duty
Triangular Silicone
Rubber Tape 70HDT
Protects and overwraps high-voltage
cable terminations, and serves as
base layer to provide clean reentry into
connections. Arc and track resistant.
Self-fusing, long-lasting, thick silicone
rubber, with a triangular tapered edge
profile and a blue guideline for halflapping.
20 mil center,
8 mil edge
180°C
356°F
1” x 30’ (25 mm x 9,14 m)
Scotch®
Professional Grade
Shielding Tape 24
All-metal open-weave shielding braid,
conformable,
temperature
stable.
Continue electrostatic shielding across
splice.
—
—
1” x 15’ (25 mm x 4,5 m)
1” x 100’ (25 mm x 30,4 m)
Scotch®
Professional Grade
Grounding Tape 25
All-metal woven braid; high currentcarrying capacity of 6AWG wire.
Solderable. Conformable ground braid
for splices and terminations.
—
—
1/2” x 15’ (12 mm x 4,57 m)
Mastics
Product Description/
Applications
Tape
Thickness
Temp
Range
Scotch-Seal
Professional Grade
Mastic Sealing Tape
2229*
Provides excellent environmental and
moisture seal. Conformable and durable
mastic for sealing high-voltage cables
and accessories. Overwrap with vinyl.
125 mil
Scotch
Professional Grade
Rubber Mastic
Sealing Tape 2228*
Provides excellent environmental and
moisture seal. Extra-conformable and
durable rubber-backed mastic for sealing
high-voltage cables and accessories.
“Built-in” rubber backing for added
conformability. Overwrap with vinyl.
65 mil
3M Scotchfil®
Electrical Insulation
Putty
Black, self-fusing, insulating putty in
tape form.
125 mil
Scotch®
Professional Grade
Vinyl Mastic Sealing
Tapes 2200, 2210,
06147, and 06149*
Provides
excellent
environmental
and moisture seal. Conformable and
durable mastic for sealing high-voltage
cables and accessories. “Built-in” vinyl
backing for fast application and abrasion
resistance.
2200 is 125 mil 80°C
2210 is 90 mil 176°F
6147 is 45 mil
6149 is 45 mil
™
®
Corrosion
Protection Tapes
32
Product Description/
Applications
Product Description/
Applications
Tape
Thickness
80°C
176°F
90°C / 194°F
emergency
overload
of 130°C / 266°F
80°C
176°F
Temp
Range
Corrosion
Protection Tapes
2” x 3’ (50 mm x 0,9 m)
1” x 10’ (25 mm x 3,0 m)
2” x 10’ (51 mm x 3,05 m)
Tape
Thickness
Temp
Range
Roll Size
3M™ Temflex™
Economy Grade
Corrosion Tape
1100 and 1100P
General purpose corrosion tape.
10 mil
80°C
176°F
2” x 100’ (51 mm x 30, 5 m)
3M™ Temflex™
Economy Grade
Corrosion Tape
1200
and 1200P
General purpose corrosion tape.
20 mil
80°C
176°F
2” x 100’ (51 mm x 30, 5 m)
Product Description/
Applications
Tape
Thickness
Temp
Range
Roll Size
Scotch® Thread
Sealant and
Lubricant Tape 48*
Pipe thread sealant that provides a
leakproof seal. Leakproof seal helps
prevent cross threading on pipe
threads.
3 mil
260°C
500°F
1/4” x 260” (6,3 mm x 7 m)
1/2” x 260” (13 mm x 7 m)
1/2” x 520” (13 mm x 13 m)
1/2” x 1296” (13 mm x 33 m)
Scotch® Glass
Cloth Tape 27 and
69*
Woven insulating glass cloth; high
temperature resistance. High mechanical
strength. Heat stable insulation for
furnace and oven controls, motor leads
& switches.
27 is 7 mil
69 is 7.5 mil
27 is Class B temp
(130°C / 266°F)
69 is class H temp
(180°C / 356°F)
Scotch® Barricade
Tape 300
Durable polyethylene plastic, bold 2”
letters, long roll length, will not tear easily,
attracts attention. Barricade applicable
in both large and small areas.
3 mil
N/A
3M™ Duct Tape
6969
Extra heavy duty duct tape, excellent
adhesion, tears easily. Moisture proofing
plumbing, duct sealing and protecting.
10.7 mil
93°C
200°F
1-7/8” x 60 yd (48 mm x 54,8 m)
2-13/16” x 60 yd (72 mm x 54,8 m)
3M™ Duct Tape
3939
Heavy duty duct tape, excellent
adhesion, strong backing. Sealing
heating ventilation and air conditioning
ducts.
9 mil
65°C
150°F
1” x 60 yd (24 mm x 54, 8 m)
1-7/8” x 60 yd (48 mm x 54.8 m)
2-13/16” x 60 yd (72 mm x 54,8 m)
3-3/4” x 60 yd (96 mm x 54,8 m)
3M™ Duct Tape
2929
Utility grade, comformable cloth duct
tape
6 mil
93°C
200°F
1-7/8” x 50 yd (48 mm x 45.7 m)
2-13/16” x 50 yd (72 mm x 45.7 m)
3M™ Outdoor
Masking and
Stucco Tape 5959*
Construction, marine and maintenance,
90 day UV resistant waterproof backing
12 mil
93°C
200°F
1-7/8” x 45 yd (48 mm x 41.1 m)
3M™ Value Duct
Tape 1900
Light duty sealing and holding for
non-critical uses, water resistant
5.8 mil
93°C
200°F
1-7/8” x 50 yd (48 mm x 45.7 m)
2-13/16” x 50 yd (72 mm x 45.7 m)
3M™ Performance
Plus Duct Tape
8979
High performance tape that removes
cleanly up to six months after exposure
to sunlight and temperature extremes.
Aggressive adhesive and high tensile
strength for demanding applications
12.6 mil
93°C
200°F
1” x 60 yd. (24 mm x 54, 8 m)
2” x 60 yd. (51 mm x 54,8 m)
3M™ Temflex™
Cotton Friction
Tape 1755
Provides extra abrasion resistance for
splices and connections.
15 mil
80°C
176°F
3/4” x 60’ (19 mm x 18,28 m)
3/4” x 82-1/2’ (19 mm x 25 m)
1-1/2” x 82-1/2’ (38 mm x 25 m)
Special
Use Tapes
Roll Size
3-3/4” x 10’ (95 mm x 3,0 m)
1” x 10’ (25 mm x 3,05 m)
Product Description/
Applications
1/2” x 66’ (12 mm x 20,1 m)
3/4” x 66’ (19 mm x 20,1 m)
3/4” x 60 yd (19 mm x 54,8 m)
1” x 60 yd (25 mm x 54,8 m)
1-1/2” x 60 yd (38 mm x 54,8 m)
1/2” x 36 yd (13 mm x 33 m)
3/4” x 36 yd ( 19 mm x 33 m)
1” x 36 yd ( 25 mm x 33 m)
3” x 300’
3” x 1000’
1-1/2” x 60” (38 mm x 1,53 m)
6-1/2” x 4-1/2” (165 mm x 144 m) pads
3-1/4” x 4-1/2” (82 mm x 144 m) pads
4” x 10’ (101 mm x 3,04 m)
2-1/2” x 10’ (63 mm x 3,04 m)
2-1/2” x 2-1/2” (63 mm x 63 m) pads
Roll Size
3M™ Scotchrap™
Professional
Grade Corrosion
Protection Tapes 50
and 51*
Protect pipe, conduits and fittings from
corrosion. All-weather performance
and corrosion resistance. Abrasion and
impact-resistant.
50 is 10 mil
51 is 20 mil
176°F
80°C
1” x 100’ (25 mm x 30,5 m)
2” x 100’ (51 mm x 30,5 m)
3” x 100’ (76 mm x 30,5 m)
4” x 100’ (102 mm x 30,5 m)
6” x 100’ (152 mm x 30,5 m)
3M™ Scotchrap™
Professional Grade
Pipe Primer
Quick-dry, non-sag rubber base primer
that prepares metal surfaces for tape
application. For use with Scotchrap
Tapes 50 & 51, Temflex Tapes 1100 &
1200.
N/A
80°C
176°F
1 gallon can (3,79 liters)
33
Aerosols, Sprays & Coatings
Protective sprays
Scotch® 1600 (400ml)
Scotch® 1600 provides highly effective anti-corrosion protection. Its rubber-asphalt base forms a dense, abrasion
resistant covering that protects against moisture, spray salt water, all corrosive media and is resistant to the effects
of physical impacts.
Scotch® 1617 Zinc Spray (400ml)
Scotch® 1617 is an ideal cold galvanizer, that provides permanent protection against rust and corrosion by
electrochemically bonding with the metal surface it is sprayed onto. Scotch® 1617 has excellent adhesion to iron
and steel, is resistant to weathering, UV radiation, moisture, heat up to 500oC, alkaline solutions and mineral oils.
It is an ideal primer for metal constructions, and complies with DIN 50976 (zinc content) and DIN 53167 (corrosion
protection).
Insulating sprays
Scotch® 1601 Clear Insulation Spray (400ml)
Scotch® 1601 is a clear insulating and covering paint based on alkyd resin. It “hardens” into a flexible and resistant
film, with excellent adhesion to most common surfaces such as metal, glass, plastic, wood, etc. Scotch® 1601 is
resistant to UV-rays, acids, oil and alkalis, it is moisture and weatherproof and is especially characterized by its high
dielectric strength.
3M
™
Scotch Aerosols,
Sprays & Coatings
The Scotch® Spray product range consists of a number of different insulating,
cleaning, protective and preventative maintenance sprays. These products should
form a major part of any maintenance programme, from preventative action to
repairing damage in all electrical and electronic environments. By safeguarding the
quality and function of technical equipment and accessories, service life can be
considerably increased.
Scotch® 1602 Coloured Insulation Spray – Red (400ml)
As Scotch® 1601 but with the addition of colouring pigments for coloured protection, insulation or marking.
Preventative maintenance sprays
Scotch® 1605 Dehumidifier (400ml)
Scotch® 1605 penetrates and displaces moisture. It also defrosts frozen sections. Scotch® 1605 then forms a thin
protective film and thus prevents the renewed ingress of moisture. It is completely neutral toward paints, plastic,
rubber and fabrics. It is effective over a wide temperature range from –74oC to + 175oC.
Scotch® 1609 Silicone Spray (400ml)
Scotch® 1609 is a general use product for preventative maintenance, protection and lubrication. It lubricates moving
parts, without becoming resinous and can be used over a wide temperature range (-32 oC to +177 oC) thereby,
providing a long lasting protection against moisture and corrosion. Scotch® 1609 is neutral towards paints, plastic,
rubber foamed materials, wood and fabrics.
Cleaning sprays
Scotch® 1625 Special Contact Cleaner (400ml)
Scotch® 1625 loosens dirt, light oxide layers and impurities of every kind in an effective gentle manner. Scotch® 1625
is electrically neutral and totally residue-free, making it ideal for use in almost any environment as a spray cleaner.
Scotch® 1626 Cleaning Spray (400ml)
Scotch® 1626 is an ideal dissolving cleaner for greases, oils, lubricants, resins and tar. It is residue free, noncorroding and washes away asbestos. Scotch® 1626 may corrode plastics.
Scotch® 1633 Rust Remover (400ml)
Scotch® 1633 is a multi-purpose spray. It loosens rust, protects against moisture and renewed oxidation, can be used
ideally as a lubricant, easily releases tightly sealed bolts, and has a high penetration capacity.
34
35
Scotchflex Cable Ties
Technical Data
Material
Nylon 66 UV approved
Flame retardation material
UL 94V-2
Temperature range
from - 40ºC to 85ºC
Halogen free
Yes
Material information
RoHS compliance
3M™ Scotchflex™ UV Cable Ties
3M
™Scotchflex
Cable Ties
3M™ Cable Ties are molded from 6/6 Nylon and are available in a variety of sizes
including weather resistant black for outdoor use. Products with the UR symbol
section meet UL Standard 1565 for Wire Positioning Devices. UL File #E116841.
3M™ Cable Ties are used to secure wire bundles and harness components quickly.
The flexible design allows the user to slip ties easily under and around cables and
harnesses. The bend of the tail makes it easier to grasp position and insert into the
head. 3M Cable Ties can be used with most standard tensioning/cutoff tools for fast
production line fastening.
36
Ref.
Size
Colour
Ref.
Size
Colour
Cable-ties (natural) nylon 6/6 for indoor application
Cable-ties (Black) nylon for indoor application
FS 100 AW-C FS 140 AW-C FS 140 BW-C FS 160 AW-C FS 160 CW-C FS 200 AW-C FS 200 BW-C FS 200 CW-C FS 200 DW-C FS 280 CW-C FS 280 DW-C FS 300 BW-C FS 370 CW-C FS 370 DW-C FS 390 CW-C FS 530 DW-C FS 780 DW-C 3M™ Scotchflex™ Neutral Cable Ties
100 mm x 2.5 mm WEATHER
140 mm x 2.5 mm WEATHER
140 mm x 3.6 mm WEATHER
160 mm x 2.5 mm WEATHER
160 mm x 4.8 mm WEATHER
200 mm x 2.5 mm WEATHER
200 mm x 3.6 mm WEATHER
200 mm x 4.8 mm WEATHER
200 mm x 7.6 mm WEATHER
280 mm x 4.8 mm WEATHER
280 mm x 7.6 mm WEATHER
300 mm x 3.6 mm WEATHER
370 mm x 4.8 mm WEATHER
368 mm x 7.6 mm WEATHER
390 mm x 4.8 mm WEATHER
530 mm x 7.6 mm WEATHER
776 mm x 9.0 mm WEATHER
FS 100 A-C
FS 140 A-C FS 140 B-C FS 160 A-C FS 160 C-C FS 200 A-C FS 200 B-C FS 200 C-C 100 mm x 2.5 mm NEUTRAL
140 mm x 2.5 mm NEUTRAL
140 mm x 3.6 mm NEUTRAL
160 mm x 2.5 mm NEUTRAL
160 mm x 4.8 mm NEUTRAL
200 mm x 2.5 mm NEUTRAL
200 mm x 3.6 mm NEUTRAL
200 mm x 4.8 mm NEUTRAL
FS 200 D-C
FS 280 C-C FS 280 D-C
FS 300 B-C FS 370 C-C FS 370 D-C FS 390 C-C FS 530 D-C 200 mm x 7.6 mm NEUTRAL
280 mm x 4.8 mm NEUTRAL
280 mm x 7.6 mm NEUTRAL
300 mm x 3.6 mm NEUTRAL
370 mm x 4.8 mm NEUTRAL
368 mm x 7.6 mm NEUTRAL
390 mm x 4.8 mm NEUTRAL
530 mm x 7.6 mm NEUTRAL
37
3M™ Cable & Wire Lubricant
3M™ Wire Pulling Lubricants Wax
3MTM Wire Pulling Lubricant Wax can be used and stored in
temperatures as high 194 oF (90 oC), making it the choice for hot
weather applications.
The thick, consistent lubricant does not liquefy or separate with hot
aging; it scoops and applies easily to wire and cable without runs or
drips in hot temperatures; and it will not evaporate too soon after
pulls. The lubricant’s low friction coefficient lessens the chance of
wire damage from high pulling forces, wipes off the cable quickly
and cleanly and leaves fewer residues in the conduit to block future
pulls or prevent removal. Because 3MTM Wire Pulling Lubricant Wax
can be immersed in water for 30 minutes with minimal weight loss,
it is also the choice for wet weather applications.
&
3MWireCable
Lubricant
™
3M™ Wire Pulling Lubricant Gel
This is a water-soluble, translucent white gel that is easy to handle
and apply to wire and cable without runs or drips. The lubricant
produces a low coefficient of friction that lessens the chance of wire
damage from high pulling forces.
Not only does 3MTM Wire Pulling Lubricant Gel make wire pulling jobs
smoother and safer, it also wipes off the cable quickly and cleanly
before terminating or splicing. The consistent gel does not liquefy, or
separate with hot or cold aging. It stays thick, smooth and ready to
apply. Temperature use range is 20oF (-6 oC) to 110 oF (43 oC).
Produces a low coefficient of friction for smooth, low tension wire and cable pulling.
Easy to apply without runs or drips. Colourless and non-staining.
3M’s complete line of Wire Pulling Lubricants are designed for specific applications,
so you can choose the right lubricant for the job at hand.
You can count on 3M reliability through high pulling forces, extreme temperature
changes, wet weather and the damaging effects of time.
38
39
Scotchlok Electrical Spring Connectors
3M™ Scotchlok™
Electrical Spring Connector
Features
Connector
3M Scotchlok
™
Electrical Spring Connectors
Conductor Combinations*
Cross section
Quantity
sol/str (mm2)
Y
1
5-6
1.5
4-5
2.5
2-5
4
2-4
R
1
5-6
1.5
4-6
2.5
2-5
4
2-4
6
2
B/G
2.5
3-6
4
2-5
6
10
These four spring connectors have a corrosion-resistant
steel inner shell to strengthen them while permitting
spring expansion and contraction due to temperature
changes.
A deep, flared skirt makes wire insertion easier and
protects against faults.
The design and a flexible base let Scotchlok connectors
bend with the wires you’re slicing to fit easily into tight
places.
Color coded, with a flexible base allowing easy bending
and An outer insulator that gives a compact, fully
insulated connection that won’t cut or abrade wires.
Corrosion-resistant steel inner shell to strengthen while
permitting spring expansion and contraction due to
temperature changes.
Application
The live action spring delivers reliable, vibration-resistant
connections over a wide range of wire
2-4
2
* Copper conductors only
ScotchlokTM Y, R, G and B Electrical Spring Connectors are the original colour-coded
wire connectors. They are flexible yet durable with an outer insulator that gives you
a compact, fully insulated connection that won’t cut or abrade wires.
3M™ DBY/DBR - Direct Bury Joint Kits
3M DBY, DBY Kits provide quick, reliable underground splicing for
irrigation and sprinkler systems, landscape lighting and other projects.
Specially designed plastic insulator tube comes pre-packaged
containing insulating gel.
Locking fingers in the tube ensure that the Scotchlok Spring Connector
stays in position, the closed tube cover provides strain relief, and the
design protects against corrosion failure. Application temperature
range is 0°C - 49°C
With 3M Direct Bury Splice Kits, there’s no mixing, no mess. Just
slide your connection (Scotchlok Y or R Connectors only) into the
insulator tube, close and bury.
DBR Kit contains the R Type Scotchlok Spring Power Connector
DBY Kit contains the Y Type Scotchlok Spring Power Connector
40
41
3M Constant Force
Springs
™
Ditection of overheating in electrical equipment and wiring
Scotchcast™ Constant Force Springs
3MTM IR 500 Infrared Thermometer
Scotchcast™ Constant Force Springs are a range of solderless connections for use
on lead or aluminium sheaths and copper screened cables.
This Laser Sighted, lightweight and durable instrument allows accurate, noncontact surface temperature measurements from -18° to 260°C (0° to 500°F)
at a safe distance. The single-point laser sighting accurately ‘spots’ trouble up to
4 feet away.
The springs are easily applied by rolling onto the sheath connections, whereupon it
continues to exert a constant pressure.
PART NUMBER
P59 P60 P61 P62 P63 P64 P65 P66 P67 42
Infrared
3MThermometers
™
INNER DIAMETER
OF SPRING
SPRING
WIDTH
SPRING TAPE
LENGTH (mm)
MIN
DIAMETER
3.5 7.5 11 14.5 18.5 25 32 44 57 9
10 16 16 16 16 20 20 20 80 175 225 295 375 505 710 935 1250 4
9
14
18.5
23.5
31
44
58
70
MAX
DIAMETER
10
15
22
29
37
50
70
94
110
Features
Non-contact temperature measurement
Laser sighting
Easy to use - one button operation
Back-lit LCD display
Wide -18° to 260°C temperature range
Celsius to Fahrenheit switchable
Powered by 9V battery (included)
Pocket sized
Applications
Monitor electric motors
Locate loose wire connections
Diagnose nuisance tripping of circuit breakers
Check lighting ballasts and transformers
43
Gulf Offices
3M Gulf Ltd.
3/F, Bldg. No. 11,
Dubai Internet City
P.O. Box 20191, Dubai, UAE
Tel: +971 4 3670 777
Fax: +971 4 3670 998
3M Saudi Arabia
(Branch of The 3M Company)
Post Box: 21840
Riyadh 11485, K.S.A.
Tel : +9661 465 0052
Fax: +9661 465 8980
Lebanon Branch
Kuwait Branch
PO Box 11-5025
Riad El Solh Beirut 1107 2180
Tel: +961 (1) 373771
Fax: +961 (1) 379947 - 379938
PO Box 148,
Safat 13002,
Kuwait
Tel: +965 249 1649
Fax 965 249 1648