FLC254-CC - Overview Size and design as for the FLC250, FLC200 series IP66, Class I Housing constructed from corrosion resistant High Pressure Die-Cast Aluminium CCG Silicon Gaskets 5CE Corrosion Protection Powdercoat finish in RAL 9007, RAL 9004, RAL 9016 or Classic Silver WE-EF Copyright 2010 FLC254-CC - Overview Secure Aiming - „Tilt and Lock“ System Hinged frame, including retaining fasteners PCS Hardware WE-EF Copyright 2010 FLC254-CC - Accessories External optical accessories Mounting accessories WE-EF Copyright 2010 FLC254-CC - Electrical Electronic control gear , thermally seperated Integrated DMX control board, thermally seperated WE-EF Copyright 2010 FLC254-CC - Lamp HIT-CE 150W / 14,000 lm / 4200 K Lampbase G12 Colour rendering index Ra = 90, high colour stability Life Rating 13,000 Hrs. (20%) and 16,000 Hrs. (50%) in combination with ECG Easy lamp change Reduced heat generation, higher efficiency WE-EF Copyright 2010 FLC254-CC - Mechanical Master-tray contains all mechanics including stepmotors and colour filters. Tray made from single aluminium block, CNC machined for dimensional accuracy, cushioned against vibration. Improved heat dissipation. Rated at 35° with gear box in downward postion. Continual operation is assured through the additon of helicoil inserts and loctite CMY- Subtractive colour mixing Dimmer function WE-EF Copyright 2010 FLC254-CC - Beam Distributions Wide - [B], Medium - [M] and Very Narrow [E] Distribution Half Peak: [B] = 2 x 30° [M] = 2 x 19° [E] = 2 x 10° Identical lamp position for all three distributions WE-EF Copyright 2010 FLC254-CC - Setup Stand-alone function Master-Slave Function Depending on the application Program can be stored either directly within the Colour Changer or in an external interface such as the WE-EF Handheld HH1. The appropriate DMX entries are indicated on both the Handheld and the Colour Changer. Fixings also supplied for the optional attachment of HH1 to DIN Rail system WE-EF Copyright 2010 FLC254-CC - Programming Windows based WE-EF CONTROL® CMY-DMX PC Software with data bank Programming of Scenes, Sequences, Days, Weeks and Months Integrated calender for programming of special days Program simulation on PC WE-EF Copyright 2010 FLC254-CC - Documentation Installation and Maintenance Instructions and Quick Reference for Colour Changer WE-EF Copyright 2010 WE-EF CONTROL ® CMY-DMX PC Software Handbook FLC254-CC - F.A.Q. Question 1: I want to install one or two colour changers with a pre-installed lighting sequence and switch them on and off only? Option 1 Stand Alone Option 2 Master Slave 1 2 3 4 5 SLAVE MASTER HIT Single CC with a pre-installed lighting sequence* Sequenz is stored in the CC itself! Storage capacity is limited. ‚Master‘ with a pre-installed sequence controls the ‚Slaves‘ Units must be defined as ‚Master‘ and ‚Slave‘ via ‘MasterSlave‘ setup On/off only, can not alter sequence or setup. Can add more ‚Stand Alone‘ untis which act Maxium 32 ‚Slaves‘ per ‚Master‘ independently Maximum Distance between‚Master‘ und last ‚Slave‘ 300m without DMX-Booster *WE-EF can provide programming and DMX address designation services. Sequence can only be altered using an interface i.e WE-EF HH1 connected via an RJ45 Cable to CC WE-EF Copyright 2010 FLC254-CC - F.A.Q. Question 2: I want to install one or two Colour Changers, but I want to alter/change the sequences on a regular basis? Option 1 Stand Alone Option 2 Master Slave Single CC operates using a pre-installed sequence stored HH1 is a defacto ‘ Master‘ if more than one CC is used in the HH1! HH1 has more storage capacity then the CC Each unit must be assigned a DMX address Connection must be permanent between the HH1 and CC Duplicate DMX addresses are possible and is via the DMX out (HH1) and DMX in (CC) using DMX Sequences can be directed to particular addresses. cable supplied. HH1 needs an external power supply Important: HH1 can be disconnected, but chosen sequence must be stored in CC if it is to continue to operate alone. Data transfer is via RJ45 cable, Ensure enough storage space is available in CC. WE-EF Copyright 2010 FLC254-CC - F.A.Q. Question 3: What method do I use to program a particular lighting sequence? One option is to use the HH1 for programming, of which there are two methods. Storage Here Option 1A Option 1B Storage Here DMX RJ45 If sequence is stored in the CC than the Hh1 must be used to make the changes HH1 is connected to the CC using the RJ45 datsa cable (no external power supply for HH1 is required) See software user manual for FLC254-CC, refer to ‚Colour Changer‘ Important: DMX addresses can also be assigned using the HH1. See operating instructions. WE-EF Copyright 2010 If sequence is stored in the HH1 then it must be connected to the CC using a DMX cable. See software user manual for FLC254-CC, refer to ‚HH1‘ Matrix FLC254-CC - F.A.Q. Question 3: What method do I use to program a particular lighting sequence? Second option is to use a computer and WE-EF CC software, of which there are again two mehtods. Option 2A Storage Here Option 2B RS2 32 RS2 32 Storage Here RJ45 Scenes, sequences, day, week and month programs can be created on a computer using WE-EF CC software Software also allows simulation of sequences. Sequences etc can then be stored in the CC by transferring data through the HH1 Important: Rfer to operating instructions of software for programming options WE-EF Copyright 2010 DMX As above, but sequences are stored in the HH1 Closing Scene 1 Transition Transition FLC254-CC Definitions Colour Closing Colour Scene 2 Closing Scene 3 Define speed and intensity of each scene. Sequenz 1 Define duration (Step Time), intensity, speed. Overwrite function sets all scenes to the same intensity and speed. Important: Consideration needs to be given for change between colours. Depending on the colour contrast between scenes, CC may flash to white! WE-EF Copyright 2010