DESCRIPTION
NARROW BEAM
MEDIUM BEAM
WIDE BEAM
EXTRA WIDE BEAM
LAMP
LAMP HOLDER
beka stadialux xp
ordering data
LUMEN
MASS (KG)
BEKA STADIALUX XP 1000W MH/TS
4
4
4
4
HQI-TS 1000W/D/S
Cable
90 000
13.3
BEKA STADIALUX XP 2000W MH/TS
4
4
4
4
HQI-TS 2000W/D/S
Cable
200 000
13.3
Standard finish: Pearl Light Grey (RAL 9022)
2000W control gear
DESCRIPTION
MASS (KG)
GEARPLATE MH 2000W 10.3A - IP 20
22.3
GEARBOX ALU MH 2000W 10.3A - IP 65
23.0
options
electrical
Control gear
Instant restrike
MECHANICAL
Mounting
Extras
Stainless steel stirrup
Helicoil inserts
Façade lighting version, with reinforced front glass
PHOTOMETRICS
Narrow
Beam angle
Medium
Wide
Extra wide
Designed and manufactured by BEKA Schréder (Pty) Ltd - South Africa
Manufacturers of Luminaires and Glass Fibre Poles
01/16
BEKA Schréder (Pty) Ltd | 13 West View Road | P.O. Box 120 | Olifantsfontein | 1665 | South Africa
T: +27 11 238 0000 | F: +27 11 238 0180
info@beka-schreder.co.za | www.beka-schreder.co.za
beka
stadialux xp
535
ø500
DIMENSIONS IN MM
ø18 ø18
75
415
75
425
• Sportsfield lighting
• Façade lighting
• The reflector system is manufactured from 99,98% super-pure
highly specular anodized aluminium.
• The luminaire is available in symmetrical narrow, medium,
wide and extra wide beam distribution.
SABS MARKS
• SANS 60598-2-5 safety mark.
195
rear housing
330
Connecting block
• The rear housing hinges open for lamp replacement.
• It is held closed with two stainless steel clamps.
Capacitor
electrical components
• The housing is robustly constructed, weatherproof, hail proof,
corrosion proof and vandal resistant.
• It is manufactured from corrosion-resistant die-cast
aluminium.
• The front glass covering the lamp compartment is heat and
impact resistant.
170
light distributions
2000W Gearplate 10.3 Amp.
23
INTENSITY DISTRIBUTION
Narrow Beam
20000
STADIALUX XP 2000W MH-TS NARROW BEAM
H=CO-180
V=C90-270
5000
10000
5000
-60
V
-30
0
H
30
60
90
Angle, degrees
stirrup
Electronic data files can be downloaded from
www.beka-schreder.co.za/knowledge-base
Medium Beam
15000
V=C90-270
11250
7500
7500
3750
-90
-60
V
-30
0
H
30
Angle, degrees
Extra Wide Beam
Wide Beam
10000
STADIALUX XP 2000W MH-TS MEDIUM BEAM
H=CO-180
Luminous Intensity, cd/klm
luminaire housing
Gearplate
310
345
-90
• The stirrup is manufactured from 4mm x 80mm hot dipped
galvanised steel.
• Holes are provided for single or double bolt mounting.
• The stirrup is reversible for suspended mounting.
• A stainless steel version is available on request.
Side view
185
Cable
glands
• The superposed pulse type ignitor and connector block is
housed in a high-pressure die-cast aluminium housing.
• The control gear is mounted on a steel tray or in a cast
aluminium box, for the 1000W lamp a 230V +3%/-10% 50Hz
single phase system and for the 2000W lamp a 380/400V
+3%/-10% 50Hz three phase system.
• All control gear components are removable and bear the
relevant SABS mark.
• All screws, bolts and metal parts are stainless steel or anti corrosion treated material.
• Mains connection on the control gear tray is by means of a
suitable screw terminal block with wire clamping contact.
• The luminaire is power factor corrected to a minimum of 0,9.
• Tapped control gear is available on request.
Construction allows for optional
precision aiming devices to be easily
attached.
380
INGRESS PROTECTION
• IP 65 in compliance with SANS 60598-2-5.
• The IP rating is certified by an SABS test report.
Front view
60
90
5000
STADIALUX XP 2000W MH-TS WIDE BEAM
H=CO-180
V=C90-270
3750
Luminous Intensity, cd/klm
The luminaire consists of a marine grade (EN 1706 AC-44300),
high-pressure die-cast aluminium housing, designed to operate
a 1000W/2000W metal halide double-ended short arc lamp.
2000W choke
Connecting block
Luminous Intensity, cd/klm
CONSTRUCTION DETAILS
Gearbox aluminium
58 65
• Lamp compartment - IP 65
• Gear compartment - IP 65
• Die-cast aluminium housing
• Symmetrical light distribution
• Narrow, medium, wide and extra wide beam reflectors
available
• Excellent heat dissipation
• High thermal and impact-resistant safety glass
• Supplied with stainless steel wireguard
172
For all 380V/400V supplies, ensure that
a phase-loss protection is provided
Luminous Intensity, cd/klm
KEY ADVANTAGES
Aerodynamic resistance - 0.17m2
Stable and reliable hinge mechanism
provides rear access for lamp
replacement.
375
reflector system
355
APPLICATIONS
5000
2500
-90
-60
V
-30
0
H
30
Angle, degrees
STADIALUX XP 2000W MH-TS EXTRA WIDE BEAM
H=CO-180
V=C90-270
2500
1250
V
60
90
-90
-60
-30
H
0
30
Angle, degrees
60
90
beka
stadialux xp
535
ø500
DIMENSIONS IN MM
ø18 ø18
75
415
75
425
• Sportsfield lighting
• Façade lighting
• The reflector system is manufactured from 99,98% super-pure
highly specular anodized aluminium.
• The luminaire is available in symmetrical narrow, medium,
wide and extra wide beam distribution.
SABS MARKS
• SANS 60598-2-5 safety mark.
195
rear housing
330
Connecting block
• The rear housing hinges open for lamp replacement.
• It is held closed with two stainless steel clamps.
Capacitor
electrical components
• The housing is robustly constructed, weatherproof, hail proof,
corrosion proof and vandal resistant.
• It is manufactured from corrosion-resistant die-cast
aluminium.
• The front glass covering the lamp compartment is heat and
impact resistant.
170
light distributions
2000W Gearplate 10.3 Amp.
23
INTENSITY DISTRIBUTION
Narrow Beam
20000
STADIALUX XP 2000W MH-TS NARROW BEAM
H=CO-180
V=C90-270
5000
10000
5000
-60
V
-30
0
H
30
60
90
Angle, degrees
stirrup
Electronic data files can be downloaded from
www.beka-schreder.co.za/knowledge-base
Medium Beam
15000
V=C90-270
11250
7500
7500
3750
-90
-60
V
-30
0
H
30
Angle, degrees
Extra Wide Beam
Wide Beam
10000
STADIALUX XP 2000W MH-TS MEDIUM BEAM
H=CO-180
Luminous Intensity, cd/klm
luminaire housing
Gearplate
310
345
-90
• The stirrup is manufactured from 4mm x 80mm hot dipped
galvanised steel.
• Holes are provided for single or double bolt mounting.
• The stirrup is reversible for suspended mounting.
• A stainless steel version is available on request.
Side view
185
Cable
glands
• The superposed pulse type ignitor and connector block is
housed in a high-pressure die-cast aluminium housing.
• The control gear is mounted on a steel tray or in a cast
aluminium box, for the 1000W lamp a 230V +3%/-10% 50Hz
single phase system and for the 2000W lamp a 380/400V
+3%/-10% 50Hz three phase system.
• All control gear components are removable and bear the
relevant SABS mark.
• All screws, bolts and metal parts are stainless steel or anti corrosion treated material.
• Mains connection on the control gear tray is by means of a
suitable screw terminal block with wire clamping contact.
• The luminaire is power factor corrected to a minimum of 0,9.
• Tapped control gear is available on request.
Construction allows for optional
precision aiming devices to be easily
attached.
380
INGRESS PROTECTION
• IP 65 in compliance with SANS 60598-2-5.
• The IP rating is certified by an SABS test report.
Front view
60
90
5000
STADIALUX XP 2000W MH-TS WIDE BEAM
H=CO-180
V=C90-270
3750
Luminous Intensity, cd/klm
The luminaire consists of a marine grade (EN 1706 AC-44300),
high-pressure die-cast aluminium housing, designed to operate
a 1000W/2000W metal halide double-ended short arc lamp.
2000W choke
Connecting block
Luminous Intensity, cd/klm
CONSTRUCTION DETAILS
Gearbox aluminium
58 65
• Lamp compartment - IP 65
• Gear compartment - IP 65
• Die-cast aluminium housing
• Symmetrical light distribution
• Narrow, medium, wide and extra wide beam reflectors
available
• Excellent heat dissipation
• High thermal and impact-resistant safety glass
• Supplied with stainless steel wireguard
172
For all 380V/400V supplies, ensure that
a phase-loss protection is provided
Luminous Intensity, cd/klm
KEY ADVANTAGES
Aerodynamic resistance - 0.17m2
Stable and reliable hinge mechanism
provides rear access for lamp
replacement.
375
reflector system
355
APPLICATIONS
5000
2500
-90
-60
V
-30
0
H
30
Angle, degrees
STADIALUX XP 2000W MH-TS EXTRA WIDE BEAM
H=CO-180
V=C90-270
2500
1250
V
60
90
-90
-60
-30
H
0
30
Angle, degrees
60
90
DESCRIPTION
NARROW BEAM
MEDIUM BEAM
WIDE BEAM
EXTRA WIDE BEAM
LAMP
LAMP HOLDER
beka stadialux xp
ordering data
LUMEN
MASS (KG)
BEKA STADIALUX XP 1000W MH/TS
4
4
4
4
HQI-TS 1000W/D/S
Cable
90 000
13.3
BEKA STADIALUX XP 2000W MH/TS
4
4
4
4
HQI-TS 2000W/D/S
Cable
200 000
13.3
Standard finish: Pearl Light Grey (RAL 9022)
2000W control gear
DESCRIPTION
MASS (KG)
GEARPLATE MH 2000W 10.3A - IP 20
22.3
GEARBOX ALU MH 2000W 10.3A - IP 65
23.0
options
electrical
Control gear
Instant restrike
MECHANICAL
Mounting
Extras
Stainless steel stirrup
Helicoil inserts
Façade lighting version, with reinforced front glass
PHOTOMETRICS
Narrow
Beam angle
Medium
Wide
Extra wide
Designed and manufactured by BEKA Schréder (Pty) Ltd - South Africa
Manufacturers of Luminaires and Glass Fibre Poles
01/16
BEKA Schréder (Pty) Ltd | 13 West View Road | P.O. Box 120 | Olifantsfontein | 1665 | South Africa
T: +27 11 238 0000 | F: +27 11 238 0180
info@beka-schreder.co.za | www.beka-schreder.co.za