Transtector FSP 4005 MC

advertisement
REV.
A
REVISIONS
ECN
DESCRIPTION
PRODUCTION RELEASE
11386
DATE
2/14/13
APPROVED
CAP
2.20
1.79
2.84
1.33
2.21
MAXIMUM CHARACTERISTICS
Application:
The FSP 4005-MC is a high-speed, high-current, silicon avalanche diode/gas tube
arrestor hybrid device designed to protect equipment from transient over voltages on T1
and Dial Up configurations and other high voltage, balanced pair applications. Continuous
bi-polar, bi-directional, non-interrupting protection is provided. The FSP 4005-MC automatically
resets after each suppression function with no degradation of protection capabilities.
This suppressor utilizes a robust hybrid circuit with gas tubes directly across the input wiring
terminal block to achieve the maximum efficacy of surge performance. At maximum power
dissipation the suppressor will not exceed the maximum voltage protection level. It is housed
inside a non-metallic enclosure with a U.L. fire rating of 94-5V. It connects to the equipment and
line via two (2), six (6) position terminal blocks.
14 AWG MAX
6-32 X 1/2"
EQUIP, GROUND
1.45
Electrical Service:
Service Voltage: 280 VDC
Configuration: 2 balanced pairs + 2 shields
Input Connection: Terminal block
Number of connector positions: 6 in 6 out
Protection Modes: Line to Line, Line to GND (No protection on shield)
Maximum Continuous Operating Voltage: 290 VDC
Nominal Current: <2.5 Amps
Electrical Performance:
Tested to IEEE 10/1000
Long Wave: Ipk 21.4 A peak
Response Time (Max): 5 nanoseconds
Standby Power (Max): < 0.05 Watt
Operating Temperature: -40°C to +65°C
Nominal Parasitic Capacitance: < 30 pF
Voltage Protection Level: < 500Vp @ 10kA 8/20µs
Nominal Surge Current Rating: >10kA 8/20µs
CUSTOMER APPROVAL: _______________________________________
ALL DIMENSIONS SHOWN ARE FOR REFERENCE ONLY.
UNLESS OTHERWISE SPECIFIED
LEADING DIMENSIONS ARE INCHES
DIMENSIONS IN [ ] ARE MILLIMETERS
Environmental:
Operating Temperature: -40°C to +65°C
Storage Temperature: -40°C to +65°C
Relative Humidity: 95%
Mechanical:
Installation Hardware: #4 (3mm)
Connector Wire gauge range: 12 Awg-28 Awg (2,052mm)-(0.32mm)
Weight: 0.25 lb. (4 oz.)
© 2015 Transtector. All rights reserved.
DATE: __________________
TOLERANCES:
FRACTIONS=±
ANGLES=±
1/32
.XX=±
1 ° .XXX=±
.01
.005
DRAWN
ENG APPD
PRODUCT MGR
MARKETING APPD
MATERIAL
NOTED
THESE COMMODITIES, TECHNOLOGY OR
SOFTWARE WERE EXPORTED FROM THE
UNITED STATES IN ACCORDANCE WITH THE
EXPORT ADMINISTRATION REGULATIONS.
DIVERSION CONTRARY TO U.S. LAW PROHIBITED.
THIRD-ANGLE PROJECTION
HMB
PROJECT NO.
DATE
2/13/13
CAP
2/14/13
MLH
3/25/13
LJ
TITLE
FSP 4005 MC
4/1/13
SIZE
NOTICE: THE INFORMATION AND DESIGN
IN THIS DOCUMENT IS THE PROPERTY
OF TRANSTECTOR SYSTEMS. ALL
SCALE
RIGHTS RESERVED.
B
CUSTOMER SPECIFICATION
PART NUMBER
CAGE
61114
1:2
PROD CAT
DST
REV
A
1101-372-5
DOCUMENT NAME
1101-372-5-C
SHEET
1
OF
1
Download