Stainless steel housing BGS type
BGS-ZM
Series
IP69K: Highly water resistant
Tough structure for food
processing line needs washing
with high temperature and high
pressure water.
8 turn sensitivity adjustment
potentiometer
For production line needs washing
Selection table
www.optex-fa.pe
Type
Sensing distance
(Adjustable distance)
10～100mm
（20～100mm ）
BGS-ZM10N
BGS
10～300mm
（20～300mm ）
Part number of PNP type has suffix “P” :
For production line with detergent splash
BGS-ZM30N
BGS-ZM10N→BGS-ZM10P
Accessories
Wall mounting bracket
Protective mounting bracket
2mm thick SUS bracket
For meat and fresh food processing line
www.optex-fa.com
Stainless steel housing BGS type BGS-Z-M
IP69K protection
IP69K is an rating of German standard DIN 40050-9 extends
the IEC 60529 rating system for high-pressure, hightemperature wash-down applications.
Test condition:
A sensor on the turn table that rotates 5 times per minutes.
90 °
60 °
Pressure:
80~100bar
Flow rate:
14~16 litre/minute
Temperature: +80℃ / -5℃
Distance from nozzle: 100 150mm
Nozzle angle: 0°
, 30°
, 60°
, 90°
Testing period: 30sec per every angle
30 °
100
150mm
0°
* IP69K doesn’t mean to guarantee that the sensor works under the test
condition above. The sensor won’t work correctly when the lens gets
wet and the light is refracted.
High-pressure, high-temperature, detergent wash-down resistant
Tough structure
SW, Pot: Poly Ether Etherketone (PEEK)
Shock, scratch, stress, heat resistant. Highly
resistant to chemical except concentrated sulfuric
acid.
Top cover: Poly Ether Sulphone (PES)
Oil, detergent, high-temperature resistant.
Top level protection in transparent plastic.
www.optex-fa.pe
Housing: SUS316L
Highly corrosion-resistant. Detergent,
bactericide resistant.
Printing by laser marking
There is no label attached so
you don’t have to care about
interfusion into foods of the
label unsticked.
Lens PPSU for thru-beam, diffuse type
Chemical, heat resistant. Very stable material.
Lens PMMA with SiO coating for retro reflective type
Oil, scratch resistant. Water repellent and anti-static.
8 turn sensitivity adjustment
potentiometer helps easy mounting
and easy position adjustment.
Gasket (FKM), cable (PVC)
Chemical, oil resistant and flexible.
High brightness LED by 4 element
enables stable detection.
8 turn potentiometer
4 element LED
(A InGaP-LED)
www.optex-fa.com
Stainless steel housing BGS type BGS-Z-M
Specifications
Type
Part number
Sensing distance
Adjustable distance
Light source
Spot size
Response time
Hysteresis
Sensitivity adjustment
Indicator
Control output
Operating mode
Cable
Power supply
Power consumption
BGS
BGS-ZM10N
BGS-ZM30N
10～100mm
※
10～300mm
※
20～100mm
※
20～300mm
※
4 element red LED
□6mm
at 80mm
□19mm
at 250mm
500μs max.
3%以下
5%以下
8 turn potentiometer
Orange LED: output, Green LED: stable
NPN (PNP) Open collector, Max.100mA/DC30V
Light ON/Dark ON selectable by switch
Cable length: 2m,
φ4
DC10~30V including 10% ripple
28mA max.
CE
Conformity
Feilen Level 3
Operating temp./humid.
-25～+55 ℃ no condensation / 35～85%RH
Environmental illuminance
Sunlight: 10,000 lux max. Incandescent lamp: 3,000 lux max.
10～55Hz double amplitude1.5mm X,Y,Z 2hours
www.optex-fa.pe
Vibration resistance
Shock resistance
Protection category
100G
（1000m/s 2 ） X,Y,Z
IEC ：IP67
3times
DIN ：IP69K
Housing: SUS316L
Top cover: PES
Material
Lens: PPSU
Switch, Pot: PEEK
Cable: PVC
Gasket: FKM
Weight
Accessory
※ With 100mm x 100mm white paper
www.optex-fa.com
Approx. 20g excluding cable
Mounting bracket:BEF-W100B
Stainless steel housing BGS type BGS-Z-M
Input/Output Diagrams
■ NPN type
■ PNP type
Brown
Brown
DC10 ～30V
Protection
Main circuit
Main circuit
Load
Black
Control output
Black
Control output
Load
Protection
Blue
■ Through beam emitter
DC10 ～30V
Blue
0V
0V
Notes
When using switching regulator for power supply, please
connect frame ground to earth ground.
■ Wiring close to high voltage or power line to motors may cause
malfunction because of inductive noise. Please wire separated
from those lines.
■ Please wait around 100msec before use sensor output after
power up.
■
www.optex-fa.pe
www.optex-fa.com
Stainless steel housing BGS type BGS-Z-M
専
用
光
電
セ
ン
Dimensions
12.9
Sensor
6.6
Sensitivity
adjustment pot.
Red LED: output
Green LED: stable
Switch
Light ON / Dark ON
21
11
1.2
2-M3, Torque: 0.5Nm max. 3
32.1
25.4
B
A
Type
A Light axis
BGS-ZM10
3.6
φ4 0.3mm 3 core
B Light axis
18.5～20.2
10.7
BGS-ZM30
18.5～20.5
www.optex-fa.pe
Mounting bracket
13.5
2-R2.2 5.7
■ BEF-W100-B
■ BEF-W100-A
7.3
Bundled with sensor
10
16
1.2
2-R1
29.3
21.2
1.2
2-Ｒ1
4
14
9°
2-Ｒ1
8-Ｒ1.6
3
5.2
44.6
7.4
5.8
7.2
25.4
2.7
9°
4
2-Ｒ0.4
3
26.3
9° 2.7
2-Ｒ1
9.1
5-Ｒ2.2 25.4
8.2
25.3
3
4-Ｒ1.6
9°
14
Protective mounting bracket
■ LK-S01
■ LK-S02
6.5
2
8
16
12 7 1 0
39
16.2
16.2
Emitter
Light axis
39
Emitter
Light axis
51
65
17.7
6.5
2
17.7
2
www.optex-fa.com
2
8
12 7 1 0
32.4
Stainless steel housing BGS type BGS-Z-M
Typical characteristic data
BGS-ZM10N
80
Adjusted distance: 100mm
8
Y
6
White paper
6
5
8
4
6
3
4
2
10
2
1
0
0
2
0
40
30
4
Y
20
6
X
8
White paper 90%
100 ×100mm
10
20
40
60
80
7
10
50
2
8
14
12
60
4
16
100
paper size: 100 * 100mm
X
70
Spot size (mm)
10
20
40
60
80
100
120
14 0 1 60
20
40
60
80 100
120 140 160 18 0
0
20
40
60
1 00
12 0
1 40
用
光
電
セ
ン
サ
180
サ
Distance: 100mm
100
Distance: 50mm
50
Distance: 100mm
100
Distance: 50mm
50
www.optex-fa.pe
0
0
BGS-ZM30N
160
10
Adjusted distance: 300mm
X
140
120
White paper
4
100
Adjusted distance: 150mm
0
80
2
60
4
Y
40
6
X
8
10
8
7
paper size: 100 * 100mm
Y
6
2
40
35
20
White paper 90% 100×100mm
100
200
300
0
400
50
100
150
30
6
25
5
20
4
15
3
10
2
5
1
Spot size (mm)
8
200
250
300
350
400
0
50
100 150 20 0 2 50 30 0 3 50 40 0 4 50
0
50
1 00
150
200
25 0
3 00
35 0
Distance: 300mm
300
200
100
0
Distance: 300mm
Distance: 200mm
Distance: 100mm
300
200
100
Distance: 200mm
Distance: 100mm
0
www.optex-fa.com