V I S HAY INTERTE C HNOLO G Y , IN C .
Medical Implantables
MARKET SOLUTIONS
w w w. v i s h a y. c o m
Solutions...
think
Vishay
Solutions...
Think
Vishay
SEMICONDUCTORS
Rectifiers
Schottky (single, dual)
Standard, Fast, and Ultra-Fast Recovery
(single, dual)
Bridge
Superectifier®
Sinterglass Avalanche Diodes
Small-Signal Diodes
Schottky and Switching (single, dual)
Tuner/Capacitance (single, dual)
Bandswitching
PIN
P r o d uc t L i s t i n gs
Zener and Suppressor Diodes
Zener (single, dual)
TVS (TRANSZORB®, Automotive, ESD, Arrays)
MOSFETs
Power MOSFETs
JFETs
RF Transistors
Bipolar Transistors (AF and RF)
Dual Gate MOSFETs
MOSMICs®
Optoelectronics
IR Emitters and Detectors,
and IR Receiver Modules
Optocouplers and Solid-State Relays
Optical Sensors
LEDs and 7-Segment Displays
Infrared Data Transceiver Modules
Custom Products
ICs
Power ICs
Analog Switches
DC/DC Converters
RF Transceivers
ICs for Optoelectronics
Passive Components
Resistive Products
Foil Resistors
Film Resistors
Metal Film Resistors
Thin Film Resistors
Thick Film Resistors
Metal Oxide Film Resistors
Carbon Film Resistors
Wirewound Resistors
Power Metal Strip® Resistors
Chip Fuses
Variable Resistors
Cermet Variable Resistors
Wirewound Variable Resistors
Conductive Plastic Variable Resistors
Networks/Arrays
Non-Linear Resistors
NTC Thermistors
PTC Thermistors
Varistors
Magnetics
Inductors
Transformers
Capacitors
Tantalum Capacitors
Molded Chip Tantalum Capacitors
Coated Chip Tantalum Capacitors
Solid Through-Hole Tantalum Capacitors
Wet Tantalum Capacitors
Ceramic Capacitors
Multilayer Chip Capacitors
Disc Capacitors
Film Capacitors
Power Capacitors
Heavy-Current Capacitors
Aluminum Capacitors
Silicon RF Capacitors
Strain Gage Transducers
and Stress Analysis Systems
PhotoStress®
Strain Gages
Load Cells
Force Transducers
Instruments
Weighing Systems
Specialized Strain Gage Systems
Medical Implantables
Market Solutions
Vishay Intertechnology, Inc.
63 Lancaster Avenue
Malvern, PA 19355
United States
Phone: +1 610 644 1300
Fax: +1 610 296 0657
www.vishay.com
NOTICE Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no
responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied,
by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay’s terms and conditions of sale for such
products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability
or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products
shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale.
Contents
Medical Implantables
Introduction
•About Vishay Intertechnology
4
Implantable or Implant Units
•Defibrillators
6
• Pacemakers
7
• Cardiac Resynchronization Therapy (CRT)
8
•Drug Infusion Devices
10
•Incontinence/Bladder Control Devices
11
Bone Growth Stimulators
• Bone Growth Stimulators
13
•Neurostimulation Devices
14
• Parkinson’s Disease Management
15
• Seizure Control
16
• Pain Management
18
Monitors
•Monitors
19
Hearing Aids
•Hearing Aids
20
• Cochlear Implants
20
Dental Diagnostic
• Ultrasound
22
•X-Ray
22
Surgical Devices
• Surgical Devices
23
•Lasers
23
Vishay Intertechnology
Introduction
About Vishay Intertechnology
Vishay was founded in 1962 to manufacture and market foil resistors, an invention of physicist Dr. Felix Zandman,
Chairman of the Board and founder. The Company began operations with foil resistors and strain gages as its initial
product offerings. In 1985, having grown from a start-up into the world’s leading manufacturer of these original
products, Vishay began an ongoing series of strategic acquisitions to broaden its product portfolio.
Broad-Line Manufacturer, Global Presence
Today, Vishay is a broad-line manufacturer with a global presence. It is one of the world’s largest manufacturers of
discrete semiconductors and passive electronic components. Vishay’s acquisitions include the infrared component
business of Infineon and such top names as Siliconix, Dale, Draloric, Sprague, Vitramon, and BCcomponents (the
former passive components business of Philips Electronics and Beyschlag).
Innovations in Technology
Over the years, Vishay’s R&D efforts have led to a steady stream of technological breakthroughs and innovative
products. These include packageless power MOSFETs, the industry’s first silicon-based RF capacitors, dc-to-dc
converter modules with all the active and passive components required for a complete power conversion solution,
high-current IHLP inductors, Power Metal Strip® resistors, and many more.
Leading Industry Rankings
Vishay’s global footprint includes manufacturing facilities in China and other Asian countries, Israel, Europe, and the
Americas, as well as sales offices around the world. Vishay has market shares ranging from substantial to numberone for each of its products.
Discrete Semiconductors
Number 1 worldwide in low-voltage power MOSFETs
Number 1 worldwide in rectifiers
Number 1 worldwide in glass diodes
Number 1 worldwide in infrared components
...and others
Passive Components
Number 1 worldwide in wirewound and other power resistors
Number 1 worldwide in foil, MELF, thin film, and current sense resistors
Number 1 worldwide in wet tantalum capacitors
Number 1 worldwide in strain gage sensors and load cells
...and others
“One-Stop Shop” Service
With Vishay’s “one-stop shop” service, customers can send their bills of materials (BOMs) to Vishay and ask
the Company to cross-reference Vishay products in all categories. This enables customers to order multiple
components from one source—Vishay. In addition, Vishay’s product sample service for design engineers provides
free product samples worldwide. Quick turnaround time and a complete range of Vishay samples enable customers
to rely on Vishay for discrete electronic component solutions. For more information about Vishay samples, please
visit us on the Web at www.vishay.com or contact a local Vishay sales representative or office.
Vishay Intertechnology
Vishay Products for the Medical Implantables Market
Vishay is a leader in meeting the critical demands of the medical implantable device market. Vishay components
can be found in many cardiac treatment devices including pacemakers used to treat bradycardia (abnormally low
heart rate) and defibrillators used to treat tachyarrhythmia (abnormally fast heart rate), and in devices used to treat
congestive heart failure.
Vishay components, in addition to being used in cardiac treatment devices, are also used in neurostimulators for the
treatment of neurological disorders such as Parkinson’s disease, bone growth stimulators used to speed the body’s
healing process, drug delivery systems used for the treatment of chronic pain and diabetes, devices used to treat
incontinence, and devices used to enhance hearing.
The products outlined in this brochure include magnetics and inductors, multilayer ferrite beads, capacitors, and
resistors. Small case sizes, tight tolerances, and high reliability are just some of the industry-leading benefits they
provide for the medical implantable device market. Vishay is also a leading supplier of custom transformers, which
are used to step up voltages in implantable defibrillators, while the company’s innovative high-reliability custom
antennae coils provide the communication link between an implanted device and the patient’s physician.
Vishay’s dedicated engineering staff is focused on providing solutions that prolong battery life and require minimum
space in the cramped environment of implantable devices. For more detailed information, including datasheets for
each of the products listed here, visit the Vishay Web site at www.vishay.com.
Magnetics and Inductors
Vishay offers a wide variety of standard inductors and transformers and is the world leader in custom magnetics,
including telemetry coils and charging transformers for implantable medical devices. Custom surface-mount
telemetry coils enable communication between an implanted device and an external monitor, helpful in many
applications including bone growth stimulators and pain management devices. Custom power and filter inductors
in RF designs, and custom flyback transformers for charging capacitors in defibrillators, are small and reliable.
Cost-effective IFC film magnetics from Vishay have high frequency and Q values for RF applications and feature
small size and weight. In the category of wirewound magnetics, the Vishay portfolio includes many products with
industry-standard sizes, wide value ranges, high energy storage capabilities, and low resistance.
Capacitors
Vishay’s medical-grade MLCC and tantalum capacitors, available in the industry’s smallest sizes, feature
a high density that makes them perfect for implanted defibrillators, pacemakers, and devices for Cardiac
Resynchronization Therapy (CRT), drug infusion, and bladder control. The VJ series of medical-grade MLCCs
feature high-reliability designs offered in several dielectric materials. The medical-grade tantalum 292D and 591D
series offer very low DC leakage in compact packages ideal for battery-supported implantable devices. Medicalgrade tantalum capacitors are available with a variety of CV ratings and package types.
Resistors
Vishay’s resistors play a significant role in implantable medical devices. For high reliability with a verified failure
rate through 100% screen testing, Vishay offers the MIL-PRF-55342 (RCWPM) military-qualified thick film and thin
film chip or variations designed to meet customer size or test requirements. The Power Metal Strip® resistor family
offers the industry’s lowest resistance values (down to 0.0003 ohms) in footprints ranging from 0603 to 5931, for
use in pacemaker energy-sensing applications and devices that manage pain and Parkinson’s symptoms. The
CZA thick film attenuator, used to improve the accuracy and speed of RF input signal circuits like those in drug
infusion devices, replaces three 0402s with a single chip. In thin film resistors, Vishay produces a huge selection
that includes the MC, P, PTN and TNPW series, which have very tight tolerances and low TCs and noise, good for
cochlear implants and seizure control devices, among others. The MM series of thin film MELF and M series of thick
film resistors, with an outstanding capability to withstand pulses combined with excellent long-term stability, are
perfectly suited for defibrillators. The CRCW series of thick film resistors, available in sizes down to the tiny 0201
and including the 0402 Flip Chip, provide excellent stability and reliability. Vishay’s Thin Film Custom High Density
integration products and standard SFM and CTR series are used in pacemaker and cardiac rhythmic
management devices.
Vishay Intertechnology
Implantable or Implant Units
Application
Series/Part Number
Features and Descriptions
Benefits
Defibrillators
Resistors
MM series
• Thin Film MELF SMD Resistor
• Very tight tolerances (0.05%, 0.1%, 0.5%,
etc)
• Very low TCs: 5/10/15/25/50 ppm/°C
• Excellent long-term stability
• Very low noise
• Very high pulse handling
• Mechanically robust
• Special RF version available
M, *HDI, SFM, CTR
• Resistor Chips and Custom Networks
• Size
• Pulse handling capability
CRCW 0201 to 0603
and CRCW 0402
Flip Chip
• Thick Film Chip Resistors
• Smallest sizes
• Commodity product
• All sizes from smallest size in industry 0201
up to 2512
• Excellent stability and reliability in different
environment conditions
M, *HDI, SFM, CTR
• Resistor Chips and Custom Networks
• Size
• Pulse handling capability
• Power Metal Strip® Resistor
• Very low resistance values (.001 to .5 ohm)
• Tight tolerances (0.5%, 1%)
• Low TCs: 30 ppm/°C
• Excellent long-term stability
• Good pulse handling
• Thick Film Resistor Chip
• Wide design flexibility
• Can be customized to customer’s
requirements
• RC and RCW are non-magnetic terminations
Resistors Thin Film
Resistors Thick Film
Resistor Metal Strip
WSL, WSL-xxxx-18
Resistor Industrial Chip
RC, RCW, or RCWP
Capacitors
Medical Grade MLCC & Tantalum
VJ Series, 292D, 591D
series
• Very low DCL Tantalum
• MLCC filter caps
• Small size, high density
• High C-V Tantalums
Custom Telemetry Coils
• Communication between external
programmer/monitor and implanted devices
• Reliable
• Small size
• Surface-mount
Custom Inductors
• Power and Filter Inductors in RF design
• Reliable
• Small size
• Surface-mount
IMC
• Wirewound Chip Inductors
• Tight tolerance available
• Low cost
IDC
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCS
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
Magnetics
Magnetics Wirewound
*High Density Thin Film Substrate Integration
Vishay Intertechnology
Application
Series/Part Number
Defibrillators
(continued)
Magnetics Transformers
Features and Descriptions
Benefits
• Flyback Transformers for Charging
Capacitors
• Reliable
• Small size
• Surface-mount
ILB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
ILBB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
• High Frequency
• High Q
• Film Chip Inductor
• Low cost
• Short lead times
• Multilayer Ceramic Inductor
• Small size and weight
• Stable and precise product
• Small chip size (1.0 mm x 0.5 mm)
• Lead-free
• CECC certified
• Very tight tolerances (0.1%, 0.5%, etc)
• Very low TCs: 10/15/25/50 ppm/°C
• Excellent long-term stability
• Low noise
• Good pulse handling
• Resistor Chips and Custom Networks
• Size
• Pulse handling capability
CRCW 0201 to 0603
and CRCW 0402
Flip Chip
• Thick Film Chip Resistors
• Smallest sizes
• Commodity product
• All sizes from smallest size in industry 0201
up to 2512
• Excellent stability and reliability in different
environment conditions
M, *HDI, SFM, CTR
• Resistor Chips and Custom Networks
• Size
• Pulse handling capability
• Power Metal Strip® Resistor
• Very low resistance values (.001 to .5 ohm)
• Tight tolerances (0.5%, 1%)
• Low TCs: 30 ppm/°C
• Excellent long-term stability
• Good pulse handling
• Military Qualified Thick Film Resistor Chip
• Established Reliability - verified failure rate
• 100% screen tested
Custom Charging
Transformers
Magnetics Ferrite Beads
Magnetics Film
IFC
Magnetics Multilayer
ILC
Pacemakers
Resistors
Thin Film Chip Resistor
MCS 0402 &
TNPW 0402
Resistors Thin Film
M, *HDI, SFM, CTR
Resistors Thick Film
Resistor Metal Strip
WSL, WSL-xxxx-18
Resistor Military Chip
Mil-PRF-55342
Capacitors
Medical Grade MLCC & Tantalum
VJ Series, 292D,
591D series
• Very low DCL Tantalum
• MLCC filter caps
• Small size
• High density
• High C-V Tantalums
*High Density Thin Film Substrate Integration
Vishay Intertechnology
Implantable or Implant Units
Application
Series/Part Number
Pacemakers
(continued)
Features and Descriptions
Benefits
Magnetics
Custom Telemetry Coils
• Communication between external
programmer/monitor and implanted devices
• Reliable
• Small size
• Surface-mount
Custom Inductors
• Power and Filter Inductors in RF design
• Reliable
• Small size
• Surface-mount
IMC
• Wirewound Chip Inductors
• Tight tolerance available
• Low cost
IDC
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCP
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCS
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
ILB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
ILBB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
• High Frequency
• High Q
• Film Chip Inductor
• Low cost
• Short lead times
• Multilayer Ceramic Inductor
• Small size and weight
MM series
• Thin Film MELF SMD Resistor
• Very tight tolerances (0.05%, 0.1%, 0.5%, etc)
• Very low TCs: 5/10/15/25/50 ppm/°C
• Excellent long-term stability
• Very low noise
• Very high pulse handling
• Mechanically robust
• Special RF version available
M, *HDI, SFM, CTR
• Resistor Chips and Custom Networks
• Size
• Pulse handling capability
CRCW 0201 to 0603 and
CRCW 0402
Flip Chip
• Thick Film Chip Resistors
• Smallest sizes
• Commodity product
• All sizes from smallest size in industry 0201
up to 2512
• Excellent stability and reliability in different
environment conditions
“Custom Resistor”
• Thick Film Resistor Chip
• Can custom design to match customer’s
Source Control Drawing needs
M, *HDI, SFM, CTR
• Resistor Chips and Custom Networks
• Size
• Pulse handling capability
Magnetics Wirewound
Magnetics Ferrite Beads
Magnetics Film
IFC
Magnetics Multilayer
ILC
Cardiac
Resynchronization Therapy
(CRT)
Resistors
Resistors Thin Film
Resistors Thick Film
*High Density Thin Film Substrate Integration
Vishay Intertechnology
Application
Series/Part Number
Cardiac
Resynchronization Therapy
(CRT)
(continued)
Resistor Metal Strip
WSL, WSL-xxxx-18
Features and Descriptions
Benefits
• Power Metal Strip® Resistor
• Very low resistance values (.001 to .5 ohm)
• Tight tolerances (0.5%, 1%)
• Low TCs: 30 ppm/°C
• Excellent long-term stability
• Good pulse handling
Capacitors
Medical Grade MLCC & Tantalum
VJ Series, 292D,
591D series
• Very low DCL Tantalum
• MLCC filter caps
• Small size
• High density
• High C-V Tantalums
Custom Telemetry Coils
• Communication between external
programmer/monitor and implanted devices
• Reliable
• Small size
• Surface-mount
Custom Inductors
• Power and Filter Inductors in RF design
• Reliable
• Small size
• Surface-mount
IMC
• Wirewound Chip Inductors
• Tight tolerance available
• Low cost
IDC
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCP
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCS
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
• Flyback Transformers for Charging
Capacitors
• Reliable
• Small size
• Surface-mount
ILB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
ILBB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
• High Frequency
• High Q
• Film Chip Inductor
• Low cost
• Short lead times
• Multilayer Ceramic Inductor
• Small size and weight
Magnetics
Magnetics Wirewound
Magnetics Transformers
Custom Charging
Transformers
Magnetics Ferrite Beads
Magnetics Film
IFC
Magnetics Multilayer
ILC
Vishay Intertechnology
Implantable or Implant Units
Application
Drug Infusion
Devices
Series/Part Number
Resistors
Features and Descriptions
Benefits
MM series
• Thin Film MELF SMD Resistor
• Very tight tolerances (0.05%, 0.1%, 0.5%,
etc)
• Very low TCs: 5/10/15/25/50 ppm/°C
• Excellent long-term stability
• Very low noise
• Very high pulse handling
• Mechanically robust
• Special RF version available
MP, MPM
• Thin Film Networks
• Small size
• Tight ratio tracking and matching
CRCW 0201 to 0603
and CRCW 0402
Flip Chip
• Thick Film Chip Resistors
• Smallest sizes
• Commodity product
• All sizes from smallest size in industry 0201
up to 2512
• Excellent stability and reliability in different
environment conditions
CZA
• Chip Attenuator
• Used on the RF input signal circuit
• Replaces three 0402s with a single chip
• Cheaper than three thin film 0402s
• Saves assembly and real estate space
• Much more stable TC
• Only need to specify the Db and the
impedance value
• Resistance values automatically configured
M, *HDI, SFM, CTR
• Resistor Chips and Custom Networks
• Size
• Pulse handling capability
• Power Metal Strip® Resistor
• Very low resistance values (.001 to .5 ohm)
• Tight tolerances (0.5%, 1%)
• Low TCs: 30 ppm/°C
• Excellent long-term stability
• Good pulse handling
Resistors Thin Film
Resistors Thick Film
Resistor Metal Strip
WSL, WSL-xxxx-18
Capacitors
Medical Grade MLCC & Tantalum
VJ Series, 292D,
591D series
• Very low DCL Tantalum
• MLCC filter caps
• Small size
• High density
• High C-V Tantalums
Custom Telemetry Coils
• Communication between external
programmer/monitor and implanted devices
• Reliable
• Small size
• Surface-mount
Custom Inductors
• Power and Filter Inductors in RF design
• Reliable
• Small size
• Surface-mount
IMC
• Wirewound Chip Inductors
• Tight tolerance available
• Low cost
IDC
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
Magnetics
Magnetics Wirewound
10
Vishay Intertechnology
Application
Series/Part Number
Features and Descriptions
Benefits
Magnetics Wirewound (continued)
Drug Infusion
Devices
(continued)
IDCP
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCS
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
ILB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
ILBB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
• High Frequency
• High Q
• Film Chip Inductor
• Low cost
• Short lead times
• Multilayer Ceramic Inductor
• Small size and weight
• Stable and precise product
• Lead-free
• CECC certified
• Very tight tolerances (0.1%, 0.5%, etc)
• Very low TCs: 10/15/25/50 ppm/°C
• Excellent long-term stability
• Low noise
• Good pulse handling
• Thick Film Chip Resistors
• Smallest sizes
• Commodity product
• All sizes from smallest size in industry 0201
up to 2512
• Excellent stability and reliability in different
environment conditions
• Power Metal Strip® Resistor
• Very low resistance values (.001 to .5 ohm)
• Tight tolerances (0.5%, 1%)
• Low TCs: 30 ppm/°C
• Excellent long-term stability
• Good pulse handling
Magnetics Ferrite Beads
Magnetics Film
IFC
Magnetics Multilayer
ILC
Incontinence/
Bladder
Control
Devices
Resistors
Thin Film Chip Resistor
MC & TNPW series
Resistors Thick Film
CRCW 0201 to 0603
and CRCW 0402
Flip Chip
Resistor Metal Strip
WSL, WSL-xxxx-18
Capacitors
Medical Grade MLCC & Tantalum
VJ Series, 292D,
591D series
• Very low DCL Tantalum
• MLCC filter caps
• Small size
• High density
• High C-V Tantalums
Custom Telemetry Coils
• Communication between external
programmer/monitor and implanted devices
• Reliable
• Small size
• Surface-mount
Custom Inductors
• Power and Filter Inductors in RF design
• Reliable
• Small size
• Surface-mount
Magnetics
Magnetics Wirewound
Vishay Intertechnology
11
Implantable or Implant Units
Application
Series/Part Number
Incontinence/
Bladder
Control
Devices
Magnetics Wirewound (continued)
Drug Infusion
Devices
(continued)
Features and Descriptions
Benefits
IMC
• Wirewound Chip Inductors
• Tight tolerance available
• Low cost
IDC
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCP
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCS
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
ILB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
ILBB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
• High Frequency
• High Q
• Film Chip Inductor
• Low cost
• Short lead times
• Multilayer Ceramic Inductor
• Small size and weight
Magnetics Ferrite Beads
Magnetics Film
IFC
Magnetics Multilayer
ILC
12
Vishay Intertechnology
Bone Growth Stimulators
Application
Bone Growth
Stimulators
Series/part number
Magnetics
Features and Descriptions
Benefits
Custom Telemetry Coils
• Communication between external
programmer/monitor and implanted devices
• Reliable
• Small size
• Surface-mount
Custom Inductors
• Power and Filter Inductors in RF design
• Reliable
• Small size
• Surface-mount
IMC
• Wirewound Chip Inductors
• Tight tolerance available
• Low cost
IDC
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCP
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCS
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
• Flyback Transformers for Charging
Capacitors
• Reliable
• Small size
• Surface-mount
ILB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
ILBB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
• High Frequency
• High Q
• Film Chip Inductor
• Low cost
• Short lead times
• Multilayer Ceramic Inductor
• Small size and weight
• Thin Film MELF SMD Resistor
• Very tight tolerances (0.05%, 0.1%, 0.5%,
etc)
• Very low TCs: 5/10/15/25/50 ppm/°C
• Excellent long-term stability
• Very low noise
• Very high pulse handling
• Mechanically robust
• Special RF version available
• Thick Film Chip Resistors
• Smallest sizes
• Commodity product
• All sizes from smallest size in industry 0201
up to 2512
• Excellent stability and reliability in different
environment conditions
Magnetics Wirewound
Magnetics Transformers
Custom Charging
Transformers
Magnetics Ferrite Beads
Magnetics Film
IFC
Magnetics Multilayer
ILC
Neurostimulation Devices
Resistors
Resistors Thin Film
MM series
Resistors Thick Film
CRCW 0201 to 0603
and CRCW 0402
Flip Chip
Vishay Intertechnology
13
Bone Growth Stimulators
Application
Bone Growth
Stimulators
Series/part number
Magnetics
Features and Descriptions
Benefits
Custom Telemetry Coils
• Communication between external
programmer/monitor and implanted devices
• Reliable
• Small size
• Surface-mount
Custom Inductors
• Power and Filter Inductors in RF design
• Reliable
• Small size
• Surface-mount
IMC
• Wirewound Chip Inductors
• Tight tolerance available
• Low cost
IDC
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCP
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCS
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
• Flyback Transformers for Charging
Capacitors
• Reliable
• Small size
• Surface-mount
ILB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
ILBB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
• High Frequency
• High Q
• Film Chip Inductor
• Low cost
• Short lead times
• Multilayer Ceramic Inductor
• Small size and weight
• Thin Film MELF SMD Resistor
• Very tight tolerances (0.05%, 0.1%, 0.5%,
etc)
• Very low TCs: 5/10/15/25/50 ppm/°C
• Excellent long-term stability
• Very low noise
• Very high pulse handling
• Mechanically robust
• Special RF version available
• Thick Film Chip Resistors
• Smallest sizes
• Commodity product
• All sizes from smallest size in industry 0201
up to 2512
• Excellent stability and reliability in different
environment conditions
Magnetics Wirewound
Magnetics Transformers
Custom Charging
Transformers
Magnetics Ferrite Beads
Magnetics Film
IFC
Magnetics Multilayer
ILC
Neurostimulation Devices
Resistors
Resistors Thin Film
MM series
Resistors Thick Film
CRCW 0201 to 0603
and CRCW 0402
Flip Chip
14
Vishay Intertechnology
Application
Series/part number
Neurostimulation Devices
(continued)
Resistor Metal Strip
WSL, WSL-xxxx-18
Features and Descriptions
Benefits
• Power Metal Strip® Resistor
• Very low resistance values (.001 to .5 ohm)
• Tight tolerances (0.5%, 1%)
• Low TCs: 30 ppm/°C
• Excellent long-term stability
• Good pulse handling
Capacitors
Medical Grade MLCC & Tantalum
VJ Series, 292D,
591D series
• Very low DCL Tantalum
• MLCC filter caps
• Small size
• High density
• High C-V Tantalums
Custom Telemetry Coils
• Communication between external
programmer/monitor and implanted devices
• Reliable
• Small size
• Surface-mount
Custom Inductors
• Power and Filter Inductors in RF design
• Reliable
• Small size
• Surface-mount
IMC
• Wirewound Chip Inductors
• Tight tolerance available
• Low cost
IDC
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCP
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCS
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
ILB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
ILBB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
• High Frequency
• High Q
• Film Chip Inductor
• Low cost
• Short lead times
• Multilayer Ceramic Inductor
• Small size and weight
• Thick Film Chip Resistors
• Smallest sizes
• Commodity product
• All sizes from smallest size in industry 0201
up to 2512
• Excellent stability and reliability in different
environment conditions
Magnetics
Magnetics Wirewound
Magnetics Ferrite Beads
Magnetics Film
IFC
Magnetics Multilayer
ILC
Parkinson’s
Disease
Management
Resistors
Resistors Thick Film
CRCW 0201 to 0603
and CRCW 0402 Flip
Chip
Vishay Intertechnology
15
Bone Growth Stimulators
Application
Series/part number
Parkinson’s
Disease
Management
(continued)
Resistor Metal Strip
WSL, WSL-xxxx-18
Features and Descriptions
Benefits
• Power Metal Strip® Resistor
• Very low resistance values (.001 to .5 ohm)
• Tight tolerances (0.5%, 1%)
• Low TCs: 30 ppm/°C
• Excellent long-term stability
• Good pulse handling
Capacitors
Medical Grade MLCC & Tantalum
VJ Series, 292D,
591D series
• Very low DCL Tantalum
• MLCC filter caps
• Small size, high density
• High C-V Tantalums
Custom Telemetry Coils
• Communication between external
programmer/monitor and implanted devices
• Reliable
• Small size
• Surface-mount
Custom Inductors
• Power and Filter Inductors in RF design
• Reliable
• Small size
• Surface-mount
IMC
• Wirewound Chip Inductors
• Tight tolerance available
• Low cost
IDC
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCP
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCS
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
ILB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
ILBB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
• High Frequency
• High Q
• Film Chip Inductor
• Low cost
• Short lead times
• Multilayer Ceramic Inductor
• Small size and weight
• Stable and precise product
• Small chip size (1.0 mm x 0.5 mm)
• Lead-free
• CECC certified
• Very tight tolerances (0.1%, 0.5%, etc)
• Very low TCs: 10/15/25/50 ppm/°C
• Excellent long-term stability
• Low noise
• Good pulse handling
Magnetics
Magnetics Wirewound
Magnetics Ferrite Beads
Magnetics Film
IFC
Magnetics Multilayer
ILC
Seizure Control Resistors
Resistor Thin Film Chip
MCS 0402 & TNPW
0402
16
Vishay Intertechnology
Application
Series/part number
Seizure Control Resistors Thick Film
(continued)
CRCW 0201 to 0603
and CRCW 0402
Flip Chip
Features and Descriptions
Benefits
• Thick Film Chip Resistors
• Smallest sizes
• Commodity product
• All sizes from smallest size in industry 0201
up to 2512
• Excellent stability and reliability in different
environment conditions
• Power Metal Strip® Resistor
• Very low resistance values (.001 to .5 ohm)
• Tight tolerances (0.5%, 1%)
• Low TCs: 30 ppm/°C
• Excellent long-term stability
• Good pulse handling
Resistor Metal Strip
WSL, WSL-xxxx-18
Capacitors
Medical Grade MLCC & Tantalum
VJ Series, 292D,
591D series
• Very low DCL Tantalum
• MLCC filter caps
• Small size
• High density
• High C-V Tantalums
Custom Telemetry Coils
• Communication between external
programmer/monitor and implanted devices
• Reliable
• Small size
• Surface-mount
Custom Inductors
• Power and Filter Inductors in RF design
• Reliable
• Small size
• Surface-mount
IMC
• Wirewound Chip Inductors
• Tight tolerance available
• Low cost
IDC
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCP
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCS
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
ILB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
ILBB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
• High Frequency
• High Q
• Film Chip Inductor
• Low cost
• Short lead times
• Multilayer Ceramic Inductor
• Small size and weight
Magnetics
Magnetics Wirewound
Magnetics Ferrite Beads
Magnetics Film
IFC
Magnetics Multilayer
ILC
Vishay Intertechnology
17
Bone Growth Stimulators
Application
Pain
Management
Series/part number
Resistors
Features and Descriptions
Benefits
• Thick Film Chip Resistors
• Smallest sizes
• Commodity product
• All sizes from smallest size in industry 0201
up to 2512
• Excellent stability and reliability in different
environment conditions
• Power Metal Strip® Resistor
• Very low resistance values (.001 to .5 ohm)
• Tight tolerances (0.5%, 1%)
• Low TCs: 30 ppm/°C
• Excellent long-term stability
• Good pulse handling
Resistors Thick Film
CRCW 0201 to 0603
and CRCW 0402
Flip Chip
Resistor Metal Strip
WSL, WSL-xxxx-18
Capacitors
Medical Grade MLCC & Tantalum
VJ Series, 292D,
591D series
• Very low DCL Tantalum
• MLCC filter caps
• Small size
• High density
• High C-V Tantalums
Custom Telemetry Coils
• Communication between external
programmer/monitor and implanted devices
• Reliable
• Small size
• Surface-mount
Custom Inductors
• Power and Filter Inductors in RF design
• Reliable
• Small size
• Surface-mount
IMC
• Wirewound Chip Inductors
• Tight tolerance available
• Low cost
IDC
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCP
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCS
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
ILB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
ILBB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
• High Frequency
• High Q
• Film Chip Inductor
• Low cost
• Short lead times
• Multilayer Ceramic Inductor
• Small size and weight
Magnetics
Magnetics Wirewound
Magnetics Ferrite Beads
Magnetics Film
IFC
Magnetics Multilayer
ILC
18
Vishay Intertechnology
Monitors
Application
Monitors
Series/part number
Resistors
Features and Descriptions
Benefits
• Power Metal Strip® Resistor
• Very low resistance values (.001 to .5 ohm)
• Tight tolerances (0.5%, 1%)
• Low TCs: 30 ppm/°C
• Excellent long-term stability
• Good pulse handling
Resistor Metal Strip
WSL, WSL-xxxx-18
Vishay Intertechnology
19
Hearing Aids
Application
Hearing Aids
Series/part number
Resistors
Features and Descriptions
Benefits
• Stable and precise product
• Small chip size (1.0 mm x 0.5 mm)
• Very tight tolerances (0.1%, 0.5%, etc)
• Very low TCs: 10/15/25/50 ppm/°C
• Excellent long-term stability
• Low noise
• Good pulse handling
• Power Metal Strip® Resistor
• Very low resistance values (.001 to .5 ohm)
• Tight tolerances (0.5%, 1%)
• Low TCs: 30 ppm/°C
• Excellent long-term stability
• Good pulse handling
• Filtering cap
• Small size
• Stable and precise product
• Small chip size (1.0 mm x 0.5 mm)
• Lead-free
• CECC certified
• Very tight tolerances (0.1%, 0.5%, etc)
• Very low TCs: 10/15/25/50 ppm/°C
• Excellent long-term stability
• Low noise
• Good pulse handling
• Thick Film Chip Resistors
• Smallest sizes
• Commodity product
• All sizes from smallest size in industry 0201
up to 2512
• Excellent stability and reliability in different
environment conditions
Custom Telemetry Coils
• Communication between external
programmer/monitor and implanted devices
• Reliable
• Small size
• Surface-mount
Custom Inductors
• Power and Filter Inductors in RF design
• Reliable
• Small size
• Surface-mount
IMC
• Wirewound Chip Inductors
• Tight tolerance available
• Low cost
IDC
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
Resistor Thin Film Chip
MCS 0402 & TNPW
0402
Resistor Metal Strip
WSL, WSL-xxxx-18
Capacitors
MLCC
VJ 0402 series
Cochlear
Implants
Resistors
Resistor Thin Film Chip
MCS 0402 & TNPW
0402
Resistors Thick Film
CRCW 0201 to 0603
and CRCW 0402
Flip Chip
Magnetics
Magnetics Wirewound
20
Vishay Intertechnology
Application
Series/part number
Features and Descriptions
Benefits
Cochlear
Implants
(continued)
IDCP
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
IDCS
• Surface-mount
• Drum core inductors
• Industry standard sizes
• Wide value range
• High energy storage
• Low resistance
• Flyback Transformers for Charging
Capacitors
• Reliable
• Small size
• Surface-mount
ILB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
ILBB
• Multilayer Ferrite Beads
• Wide range of size and impedance values
• Low cost
• Short lead times
• High Frequency
• High Q
• Film Chip Inductor
• Low cost
• Short lead times
• Multilayer Ceramic Inductor
• Small size and weight
Magnetics Transformers
Custom Charging
Transformers
Magnetics Ferrite Beads
Magnetics Film
IFC
Magnetics Multilayer
ILC
Vishay Intertechnology
21
Dental Diagnostic
Application
Ultrasound
Series/part number
Resistors
Features and Descriptions
Benefits
• Stable and precise product
• Lead (Pb)-free
• CECC certified
• Very tight tolerances (0.1%, 0.5%, etc)
• Very low TCs: 10/15/25/50 ppm/°C
• Excellent long-term stability
• Low noise
• Good pulse handling
• Resistor Chips and Custom Networks
• Size
• Pulse handling capability
• Thick Film Chip Resistors
• Smallest sizes
• Commodity product
• All sizes from smallest size in industry 0201
up to 2512
• Excellent stability and reliability in different
environment conditions
• Power Metal Strip® Resistor
• Very low resistance values (.001 to .5 ohm)
• Tight tolerances (0.5%, 1%)
• Low TCs: 30 ppm/°C
• Excellent long-term stability
• Good pulse handling
• High voltage MLCC snubber and low noise
Tantalum filters
• Wide range of voltages and case sizes
• Stable and precise product
• Lead (Pb)-free
• CECC certified
• Very tight tolerances (0.1%, 0.5%, etc)
• Very low TCs: 10/15/25/50 ppm/°C
• Excellent long-term stability
• Low noise
• Good pulse handling
• Thick Film Chip Resistors
• Smallest sizes
• Commodity product
• All sizes from smallest size in industry 0201
up to 2512
• Excellent stability and reliability in different
environment conditions
• Power Metal Strip® Resistor
• Very low resistance values (.001 to .5 ohm)
• Tight tolerances (0.5%, 1%)
• Low TCs: 30 ppm/°C
• Excellent long-term stability
• Good pulse handling
• High voltage MLCC snubber and low noise
Tantalum filters
• Wide range of voltages and case sizes
Resistor Thin Film Chip
MC & TNPW series
Resistors Thin Film
M, *HDI, SFM, CTR
Resistors Thick Film
CRCW 0201 to 0603
and CRCW 0402
Flip Chip
Resistor Metal Strip
WSL, WSL-xxxx-18
Capacitors
MLCC/Tantalum
RuGGed Chip,
293D series
X-Ray
Resistors
Resistor Thin Film Chip
MC & TNPW series
Resistors Thick Film
CRCW 0201 to 0603
and CRCW 0402
Flip Chip
Resistor Metal Strip
WSL, WSL-xxxx-18
Capacitors
MLCC/Tantalum
RuGGed Chip,
293D series
22
Vishay Intertechnology
Surgical Devices
Application
Surgical
Devises
Series/part number
Resistors
Benefits
• Stable and precise product
• Lead (Pb)-free
• CECC certified
• Very tight tolerances (0.1%, 0.5%, etc)
• Very low TCs: 10/15/25/50 ppm/°C
• Excellent long-term stability
• Low noise
• Good pulse handling
• Thin Film MELF SMD Resistor
• Very tight tolerances (0.05%, 0.1%, 0.5%,
etc)
• Very low TCs: 5/10/15/25/50 ppm/°C
• Excellent long-term stability
• Very low noise
• Very high pulse handling
• Mechanically robust
• Special RF version available
• Thick Film Chip Resistors
• Smallest sizes
• Commodity product
• All sizes from smallest size in industry 0201
up to 2512
• Excellent stability and reliability in different
environment conditions
• High voltage MLCC snubber and low noise
Tantalum filters
• Wide range of voltages and case sizes
Thin Film Chip Resistor
MC & TNPW series
Lasers
Features and Descriptions
Resistors
Resistors Thin Film
MM series
Resistors Thick Film
CRCW 0201 to 0603
and CRCW 0402
Flip Chip
Capacitors
MLCC/Tantalum
RuGGed Chip,
239 series
Vishay Intertechnology
23
Notes
24
Vishay Intertechnology
Semiconductors:
Rectifiers • Small-Signal Diodes • Zener and Suppressor Diodes • MOSFETs
• RF Transistors • Optoelectronics • ICs
Passive Components:
Resistive Products • Magnetics • Capacitors • Strain Gage Transducers and
Stress Analysis Systems
One of the World’s Largest
Manufacturers
Worldwide Sales Contacts
of Discrete Semiconductors and Passive Components
The Americas
EUROPE
united states
germany
Vishay Americas
One Greenwich Place
Shelton, CT 06484
United States
Ph: +1-402-563-6866
Fax: +1-402-563-6296
Vishay europe sales GmbH
Geheimrat-Rosenthal-Str. 100
95100 Selb
Germany
Ph: +49-9287-71-0
Fax: +49-9287-70435
Asia
france
singapore
Vishay S.A.
199, blvd de la madelEine
06003 nice, cedex 1
France
Ph: +33-4-9337-2920
Fax: +33-4-9337-2997
Vishay intertechnology
Asia Pte Ltd.
25 Tampines Street 92
Keppel Building #02-00
Singapore 528877
Ph: +65-6788-6668
Fax: +65-6788-0988
p.R.C.
Vishay Trading (Shanghai) Co., Ltd.
(Shanghai Representative Office)
Room D, 15F, Sun Tong Infoport plaza
55 huai hai west road
200030 shanghai
P.R.C.
Ph: +86-21-5258-5000
fax: +86-21-5258-7979
netherlands
Vishay bccomponents b.v.
hurkestraat 31
p.o. box 8766
5652 ah eindhoven
netherlands
Ph: +31-40-2590-700
Fax: +31-40-2590-777
japan
vishay japan CO., LTD.
Shibuya 3-chome Square Building 3F
3-5-16 Shibuya
Shibuya-Ku
Tokyo 150-0002
Japan
Ph: +81-3-5464-6411
fax: +81-3-5464-6433
w w w. v i s h a y. c o m
VMN-PL0002-0610